1-103 Slide Shoe for Cams

Size: px

Start display at page:

Download "1-103 Slide Shoe for Cams"

Phoebe Russell
5 years ago
Views:

1-103 Slide Shoe for Cams Slide shoe for cams, 2 parts,

Matching cams as of 35 mm, steel product system 1.

with a 3-point-cam adapter it matches 3-point-cam

No abrasion of the metal of the clamping surface resp.

components (risk of short circuits in computer, server etc.).

quarter turn, it is possible to retrofi t at any time (please

Separable after durability (recyclable).

1 1-103 Slide Shoe for Cams Slide shoe for cams, 2 parts, consisting of housing and latch. Matching cams as of 35 mm, steel product system and stainless steel product system 7-080, in combination with a 3-point-cam adapter it matches 3-point-cam applications as well. No abrasion of the metal of the clamping surface resp. cam and therefore safety concerning electronic built-in components (risk of short circuits in computer, server etc.). Good gliding properties, therefore low friction coeffi cient, no fretting of the material. Prevents the surface from being scratched. Tool-less assembly and disassembly. The housing will be hold at the slope of the cam and being fi xed to the latch. The assembly will be carried out with the already installed quarter turn, it is possible to retrofi t at any time (please take the H-height into consideration). Separable after durability (recyclable). Caution: The H-height diminishes by 2 mm. E.g. cam (H-height 18 mm) results into an H-dimension of 16 mm. POM, natural Part-No. Slide Shoe DIRAK GmbH Königsfelder Str Ennepetal Tel. / Phone: +49 (0) 2333/837-0 Fax: +49 (0) 2333/ / copyright by DIRAK / Germany

1-041.02SL Captive D-SNAP-Joiner 12.7 for cutout 12.7, complies with the machinery directive 2006/42EG, tool-less installation Captive D-SNAP-Joiner for joining flat metal sheets.

2 SL Captive D-SNAP-Joiner 12.7 for cutout 12.7, complies with the machinery directive 2006/42EG, tool-less installation Captive D-SNAP-Joiner for joining flat metal sheets. The joining of metal sheets is achieved by pushing the Captive D-SNAP-Joiner into the cutouts. The front panel can be separated from the rear panel by using a Phillips H2 screwdriver. Turn the Phillips head insert to pull the front panel away. Designed for ease of use by the enduser - disengaging is achieved by turning the knob ¼. Save up to 90% assembly time. The dimension always means the thickness of both sheets together. Completely pre-assembled, one-piece. Machinery Directive 2006/42EC: In order to meet the Machinery Directive 2006/42EC an additional U-shaped spring is riveted onto the housing. The Captive D-SNAP-Joiner is held in position and remains held by the U-shaped spring. The Captive Joiner eliminates the concern of losing, dropping or misplacing hardware. Housing: zinc die, untreated SNAP wedges: sintered steel Insert: steel, chrome plated U-shaped spring: spring steel, zinc plated Leaf spring: stainless steel clamping range Part No. Captive D-SNAP-Joiner Other - dimension on request! copyright by DIRAK / Germany

3 1-092 Quarter-Turn 2K Pr20.1 L18 2 component PA6 / TPE, protective insulated PA UL 4Nm IP 65/67 Elegantly designed, sealed polyamide quarter-turn with moulded-in TPE seal that is permanently fixed in the PA housing, thus ensuring that it cannot be lost. The seal is located under the head and inside the housing. Colored seal. Water- and dust-tight according to IP65/67 DIN EN The Quarter-Turn consists of three basic components which can be combined to suit your application. Insert and cam can be clipped together without tools before the installation in the housing. A pre-assembled Quarter-Turn can be installed through the cutout. RH and LH application. Maximum load for the cam 250N. Load may be increased to 600N with use of a fi xing plug. Attention: Please consider the packing units! Housing, insert, cam and nut: PA6, black Seal: TPE, red Fixing plug: PA6, red Part No. packing unit / piece see product system a) Housing 2K a1) Nut Inserts: b) Double bit 3mm pin b1) Double bit 5mm pin b2) Square 8mm b3) Triangular 8mm b4) Slotted 2x4mm deep Cams: c) H=18 (0.709) c1) H=20 (0.787) c2) H=22 (0.866) c3) H=24 (0.945) c4) H=28 (1.102) Optional: Finger pull and Dustcap Anti-rotation device Assembly on request d) Fixing Plug on request 250

Low profi le design. Clamping grip 6mm/0.236. Vibration-proof according to DIN EN 61373.

Installation depth in uncompressed condition, 69mm/2.717. Water- and dust-tight according to IP67 DIN EN 60529.

4 7-079 Compression Latch Pr20.1 H-dimension adjustable, stainless steel AISI Nm IP 67 Elegant Compression Latch with variable H-dimension. Low profi le design. Clamping grip 6mm/ Vibration-proof according to DIN EN Dots are marked in color on the housing top open/closed in the shape of the padlock. Installation depth in uncompressed condition, 69mm/ Water- and dust-tight according to IP67 DIN EN RH and LH version. The H-dimension can be varied via the cranking of the cams. The cam can be varied to ±6mm/0.236 via nuts (included) on the axis. Housing, Insert, Axle, Nut, Cam and Serrated Screw: stainless steel O-Ring: NBR a) Compression Latch with Insert: Part-No. Part-No. RH (as drawn) LH AA AA Square Square Square Double bit Double bit Triangular 6, Triangular Tiangular Conical Square see product system Serrated lock washer, anti-rotation device and dustcap to be ordered separately Key for Insert 6-100

5 7-079 Compression Latch Pr20.1 H-dimension adjustable, stainless steel AISI 316 b) Cams H in mm / inch KK Component Part-No. Component Part-No. L35 L45 negative / / / / / / / / / / / straight / positive / / / / / / / / / / /

4-400 Scharnier PA Pr01 180 60x40 für innenliegende Tür, anschraubbar Formschönes Anschraubscharnier für Senkschrauben, DIN 7991 oder nach DIN ISO 10642 und

Spielfreie Ausführung. 6 teiliges Gewerbe. Geringes Gewicht. Korrosionsbeständig. Abgerundete Kanten. Werkstoff: Scharnier: PA6, schwarz Bestell-Nr.

6 4-400 Scharnier PA Pr x40 für innenliegende Tür, anschraubbar Formschönes Anschraubscharnier für Senkschrauben, DIN 7991 oder nach DIN ISO und nach DIN 965 oder DIN ISO Links und rechts einsetzbar. Öffnungswinkel 180. Unverlierbarer Stift. Stift gegen herausschlagen gesichert. Spielfreie Ausführung. 6 teiliges Gewerbe. Geringes Gewicht. Korrosionsbeständig. Abgerundete Kanten. Werkstoff: Scharnier: PA6, schwarz Bestell-Nr. Scharnier PA DIRAK GmbH Königsfelder Str Ennepetal Tel. / Phone: +49 (0) 2333/837-0 Fax: +49 (0) 2333/ / copyright by DIRAK / Germany

180 Polyamide Hinge Page. for single cabinets. 180 polyamide hinge with self - securing pin. RH or LH application.

180 Polyamide Hinge Page. for single cabinets. 180 polyamide hinge with self - securing pin. RH or LH application. 180 Polyamide Hinge for single cabinets Page 4-145 180 polyamide hinge with self - securing pin. RH or LH application. Material: Door- and frame part: P, black Pin: DELRIN, natural color Part No. 212-9101