Sno-Thro. Parts Manual. Models ST624E A 8/10 Printed in USA

Transcription

1 Sno-Thro Parts Manual Models ST62E A 8/10 Printed in USA

2 THE MANUAL Before you operate your unit, carefully and completely read manuals supplied with the unit. The contents will provide you with an understanding of safety instructions and controls during normal operation and maintenance. For your safety and the safety of others always read, understand, and follow all DANGER, WARNING, and CAUTION messages found in manuals and on safety decals. Hardware descriptions are given in decimals. Decimals to Fractions.063 1/ /16.5 1/ /8.8 3/ / /.50 3/.3 5/16.8 / /8.85 /8.38 / / / SERVICE AND REPLACEMENT PARTS When ordering replacement parts or making service inquiries, know the Model and Serial numbers of your unit and engine. Numbers are located on the product registration card in the unit literature package. They are printed on a serial number label, located on the frame of your unit. Record Unit Model and Serial numbers here: PRODUCT REGISTRATION The Ariens dealer must register the product at the time of purchase. Registering the product will help the company process warranty claims or contact you with the latest service information. All claims meeting requirements during the limited warranty period will be honored, whether or not the product registration card is returned. Keep a proof of purchase if you do not register your unit. Customer Note: If Dealer does not register your product, please fill out, sign and return the product registration card to Ariens or go to YOUR SATISFACTION IS IMPORTANT Questions? Please follow these helpful steps: 1. Refer to the manuals supplied with your unit. They will guide you through safe and proper operation and maintenance. They contain specifications on your unit. If your questions are not answered in these manuals, go to step number two. 2. Contact Your Dealer. Our dealers will be happy to supply any service or advice required to keep your unit operating at peak efficiency. A factory trained staff is available to support your equipment needs. They stock genuine Ariens parts and lubricants manufactured with the same precision and skill as the original. If your questions are not resolved by the support staff, ask for the manager or owner. When contacting your Dealer supply your model and serial numbers. Record Engine Model and Serial numbers here: TO SPEED PARTS ORDERING: 1. Know the model and serial numbers of your unit. 2. Know the part number required. 3. Know the quantity required.. Know the part description. UNAUTHORIZED REPLACEMENT PARTS Use only Ariens replacement parts. The replacement of any part on this vehicle with anything other than an Ariens authorized replacement part may adversely affect the performance, durability, or safety of this unit and may void the warranty. Ariens disclaims liability for any claims or damages, whether warranty, property damage, personal injury or death arising out of the use of unauthorized replacement parts. 2

3 MODELS Domestic (62E) 195cc Techumseh Engine 2 Sno-Thro Serial No and up TABLE OF CONTENTS DECALS Decals ENGINE AND DRIVE Engine and Belt Drive Friction Drive FRAME AND HOUSING Handlebars and Controls Auger and Chute Discharge Chute Crank Gearcase and Impeller

4 08000 DECALS PS0322 Item Part No. Qty. Description Decal, American Flag Decal, Danger- Rotating Parts Decal, Danger Decal, Front Panel, ST62E Decal, Control, Compact/Deluxe

5 NOTES 5

6 ENGINE AND BELT DRIVE Serial No.: PS0333 6

7 ENGINE AND BELT DRIVE Item Part No. Qty. Description Tire/Wheel, RH x.00-6 Pin Tire/Wheel LH x.00-6 Pin AR Tire, 2PR X-Trac x Bushing, Sleeve Engine, 195cc Tecumseh OH195SA 0V (Serial No.: , 260 and up) Engine, 195cc Tecumseh OH195SA 0V (Serial No.: ) Bracket, Mount- Idler Arm Bushing, Sleeve Bushing, Sleeve Weldment, Traction Idler Arm Belt Finger Washer, Locking.3 x.09 Heavy Bolt, Hex.31-2 x.5 Grade Belt Cover Screw, Tapping Hex Washer Head x Key, Woodruff.25 x.50 x.3 SAE Ring, Retaining-External.250 x Spring, Extension Shaft, Axle Bushing Bushing, Polyliner.50 Split Washer, Flat Steel.531 x 1.06 x Spring, Torsion Weldment, Attachment Idler Arm Arm, Clutch - Attachment Bolt-Round Head Square Short Neck.31- x 1.25 Grade Washer, Flat Steel.38 x.85 x Washer, Wave.50 x.5 x.015,. Free Height Spacer, Bearing Idler AR Key, Push/Pull Tecumseh Nut, Locking-Top-Flange Washer, Flat Steel.5 x 1.5 x Pin-LOK.31 x Rivet-Pop. (included with item 9) Brake Pad (included with item 9) V Belt L Sheave, Attachment Drive (Serial No.: , 260 and up) Spur Gear, 5 Tooth V-Belt 3L Traction Sheave Half (Serial No.: , 260 and up) Bracket, Mount- Brake Bolt, Hex x 1.5 Grade AR Plug, Spark AR Cap, Fuel Cord, Extension 0 V Washer, Flat Steel.5 x 1.5 x Pin-Roll.8 x Bolt, Hex.31-2 x 2.00 Grade 5 (Serial No.: , 260 and up) Washer, Locking.3 x.09 Heavy (Serial No.: , 260 and up) Bushing, Sleeve Brake Arm W/Pad Washer, Flat-Steel.06 x.8 x Nut, Locking Center.38-16

8 ENGINE AND BELT DRIVE Item Part No. Qty. Description Nut, Locking Center Jam Spring, Extension Weldment, Frame Bracket Bolt, Round Head Square Short Neck.31- x Bolt, Hex x 1.50 Grade Nut, Locking-Jam-Center Bolt, Hex.31- x 1.50 Grade Plug, Hole 1.00" Nylon Engine Sheave, One-piece (Serial No.: ) Key, Square.8 x 1.00 x.8 SAE 8630 OR SAE 1035 (Serial No.: ) Screw, Set.31- x.38 Socket Head (Serial No.: ) 8

9 FRICTION DRIVE PS032 Item Part No. Qty. Description Weldment, Shift Fork Bushing, Polyliner-.50 Snap-in Bushing, Polyliner-.50 Split Clip, Spring Flange, Bearing Screw, Tapping x.50 Hex Washer Head Washer, Flat-Steel.563 x 1.38 x Gear, Pinion, Tooth w/spline Plug, Hole-.85" Nylon Bracket, Cable Pulley Washer, Flat Steel.505 x 1.00 x Carrier, Drive Disc Friction Disc Hex Shaft w/spline Pin, Spring Clip Pulley, Cable Bolt, Shoulder.35 x.35 x Nut, Locking Top Flange Plate, Swing Assembly Spacer, Swing Gate Cable, Traction- Tractor Washer, Flat-Steel.3 x.688 x Pin, Hair Internal.08 x. x Spring, Extension Screw, Tapping Serrated Head Torx.31- x.50 9

10 10 HANDLEBARS AND CONTROLS PS

11 HANDLEBARS AND CONTROLS Item Part No. Qty. Description Knob, Ball-Black 1., Weldment, Shift Lever Bolt, Hex x 2.00 Grade Spring, Compression Washer, Flat Steel.38 x 1.00 x Nut, Locking Center Pin, Hair Internal.08 x. x Weldment, Frame Strap, Engine Bolt Weldment Bolt, Hex Washer Head x.5 Grade Cover Bottom Hole Plug, Plastic. Hole Left Hand Cam, Interlock Nut, Hex Right Hand Cam, Interlock Nut, Retainer x Washer, Locking.31 x.09 Heavy Control Panel with Decal Handlebar, Lower Knob, Wing Bolt Serrated Hex Flange Washer Head x.5 Grade Spacer, Handlebar Ring, Retaining, External.25 x Rivet-Pop, Handlebar, Upper RH Handlebar, Upper LH Bolt, Round Head Square Neck.31- x Paddle, Clutch - RH Compact Bushing Spring, Torsion Bushing, Flange Nut, Jam Nylon With Nylon Locking Type Insert Bushing, Polyliner Weldment, Interlock Shaft Washer, Flat-Steel.06 x.8 x Spring, Extension Cable, Attachment Compact Paddle, Clutch - LH Compact Cable, Traction Bolt, Round Head Square Extra Long Neck.31- x 1.50 Grade Nut, Locking Top Flange Bracket, Shift Mount Bolt, Round Head Square Short Neck.31- x Pivot, Shift Rod Rod, Shift Lower Rod, Shift Upper Bolt, Round Head Square Neck x.5 Grade Nut, Locking Wing Handle Grip Bumper Pad Bolt, Hex x Bushing, Sleeve Washer, Flat, Steel.281 x.62 x

12 AUGER AND CHUTE PS0363

13 AUGER AND CHUTE Item Part No. Qty. Description Nut, Locking Center Chute, Discharge, Compact Snow Bolt, Round Head Square Short Neck.31- x.5 Grade Device, Snow Cleanout Rivet-Pop Mount, Snow Cleanout Weldment, 2" Blower Housing Screw-Tapping Hex Washer Head x Runner, Double Flange Nut, Locking Center Washer, Flat Steel.38 x.85 x Bushing-Flange, Nyliner.5 I.D Bushing, Rake Shaft.5" Rake Right Hand 2 with Zerks (Includes Items 16) Rake Left Hand 2 with Zerks (Includes Items 16) Shear Bolt with Nut (Includes Items 1) Zerk, Fitting.25 x.5 Drive-In Screw, Tapping.31- x.50 Hex Washer Head Washer, Flat Steel.3 x.688 x Nut, Locking Center Wave Washer.390 x.655 x Washer, Plastic.390 x.85 x Bolt, Round Head Square Short Neck.31- x Scraper Blade 2 Compact Bolt, Round Head Square Short Neck x Nut, Locking Top Flange.31-

14 DISCHARGE CHUTE CRANK

15 DISCHARGE CHUTE CRANK Item Part No. Qty. Description Cap,.38 Rod Knob, Chute Crank Screw, Tapping, Hex Washer Head x Cover, Gear Bushing, Polyliner Pin, Spring Clip Gear, Chute Bolt, Round Head Square Neck x 2.50 Grade Bracket with Pinion Gear (Contains Items 5, 10, 11, ) Washer, Thrust.625 x 1.0 x Bracket, Pinion Gear Push Nut Washer, Flat Steel.38 x 1.50 x Friction Washer Weldment, Chute Pedestal Friction Plate Spring, Compression Washer, Flat Steel.06 x.8 x Nut, Locking Center Bolt, Hex x 1.5 Grade Washer, Lock.38 x Nut, Locking Top Flange Bolt, Round Head Square Neck.31- x 1.50 Grade Bracket, Crank Support Nut, Locking Top Flange Bushing, Polyliner Rod, Chute Crank 15

16 GEAR CASE AND IMPELLER PS0381 Item Part No. Qty. Description Pulley, L with Hub Ariens 16 oz. Bottle of L2 Lube Seal, Oil Pin, Groove.8 x 1.25 Type E Pin, Roll.25 x Weldment, Impeller " 3 Blade Washer, Fiber.3 x.656 x Bushing, Flange Thrust Collar.5 I.D Shaft & Worm Gear Assembly Gear Case Casting, Machined Left Hand Key, Woodruff.19 x.63 Hardened # Washer, Flat Steel.8 x 1.50 x Screw, Tapping x.5 Rolok Shaft, Rake 2" Bushing, Flange Screw, Tapping Hex Washer Head x Washer, Flat Steel.55 x 1.35 x Loctite Gasket Gear Case Casting, Machined Right Hand Bushing, Flange Gear Case Assembly- 2" (contains 3-, -, 1-21, 2) Nut, Locking Center Bearing Flange Bearing, Ball Bearing, Flange Seal, Oil Bolt, Hex.31-2 x.5 Grade Washer, Locking.3 x.09 Heavy 16

17 Ariens Company 655 West Ryan Street P.O. Box 15 Brillion, WI Fax