180 Polyamide Hinge Page. for single cabinets. 180 polyamide hinge with self - securing pin. RH or LH application.
|
|
|
- Malcolm Fox
- 5 years ago
- Views:
Transcription
1 180 Polyamide Hinge for single cabinets Page polyamide hinge with self - securing pin. RH or LH application. Material: Door- and frame part: P, black Pin: DELRIN, natural color Part No Stainless steel version on page Screws and nuts on page D 29/04/02 1/15/03 copyright by DIRK / ermany
2 Polyamide Hinge Lift-off Page Polyamide Hinge RH or LH application. astening screws M5x~15 at top and bottom will give electrical conductivity. Top and bottom part have a molded-in plate with 2 threaded holes M5. This construction makes the hinge very strong. Material: Hinge parts: P, black Plate insert (fully molded-in): steel, untreated Pin: stainless steel Polyamide Hinge Screws and washers are not included. D 07/08/01 1/15/03 copyright by DIRK / ermany
3 4-400 Scharnier P Pr x40 für innenliegende Tür, anschraubbar ormschönes nschraubscharnier für Senkschrauben, DIN 7991 oder nach DIN ISO und nach DIN 965 oder DIN ISO Links und rechts einsetzbar. Öffnungswinkel 180. Unverlierbarer Stift. Stift gegen herausschlagen gesichert. Spielfreie usführung. 6 teiliges ewerbe. eringes ewicht. Korrosionsbeständig. bgerundete Kanten. Werkstoff: Scharnier: P6, schwarz estell-nr. Scharnier P DIRK mbh Königsfelder Str Ennepetal Tel. / Phone: +49 (0) 2333/837-0 ax: +49 (0) 2333/ / copyright by DIRK / ermany
4 4-401 Hinge P Pr x 60 Yes enefits: Material: or nested doors. Hinge visible. RH/LH application. 180 opening angle. Low weight. orrosion resistant. Hinge: P, black Pin: stainless steel Yes Yes 1. = astening with countersunk screw M8 DIN 7991 or DIN ISO and DIN 965 or DIN ISO 7046 Hinge Part Number Pin version Installation type stainless steel screw-on Hinge P Pr x 60 Page 1
5 Powered by TPD ( Hinge P Pr x 60 Page 2
6 4-402 Hinge P Lift-off Pr x 60 Yes enefits: Material: or nested doors. Hinge visible. RH and LH version. 180 opening angle. Low weight. orrosion resistant. Lift-off. Hinge: P, black Pin: stainless steel Yes Yes Yes 1. = astening with countersunk screw M5 DIN 7991 or DIN ISO and DIN 965 or DIN ISO 7046 Hinge Part Number Pin version Version Installation type stainless steel RH screw-on stainless steel version LH screw-on Hinge P Lift-off Pr x 60 Page 1
7 Powered by TPD ( Hinge P Lift-off Pr x 60 Page 2
8 Hinges / Various hinges Reinforced polyamide hinges with countersunk holes Hinges are made of 30% polyamide, pins are in 304 stainless steel. full product data sheet is available on our website. D E H S part number material finish weight polyamide black 44g polyamide black 56g H D E S Reinforced polyamide hinges with studs Hinges are made of 30% polyamide, pins are in 304 stainless steel. full product data sheet is available on our website. D E H L M part number material finish weight M polyamide black 56g M polyamide black 76g M H D E L 119 La solution charnières et verrouillages
9 La solution charnières et verrouillages Hinges / Various hinges Reinforced polyamide hinges combined studs and holes Hinges are made of 30% polyamide, pins are in 304 stainless steel. full product data sheet is available on our website. D E H L M S part number material finish weight M polyamide black 50g M polyamide black 50g M H D E L S 120
10 La solution charnières et verrouillages Hinges / Various hinges Lift-off hinges in plastic Hinges are made of 15% polyamide, pins are in 303 stainless steel D S note part number material finish weight type 1 symmetric not shown polyamide black 53g type 2 as shown below polyamide black 53g D ) 124
11 Hinges / Designed hinges in polyamide Square design hinges with countersunk holes Hinges are made of 30% polyamide, pins are in 304 stainless steel. D E S part number material finish weight polyamide black 6g polyamide black 12g polyamide black 22g polyamide black 32g Ø D E Ø S Square design hinges with studs Hinges are made of 30% polyamide, pins are in 304 stainless steel. D E part number material finish weight polyamide black 54g Ø D 14 E M6 61 La solution charnières et verrouillages
12 La solution charnières et verrouillages Hinges / Designed hinges in polyamide Symmetrical design hinges Hinges are made of 30% polyamide, pins are in 304 stainless steel. D E H S part number material finish weight polyamide black 20g polyamide black 28g polyamide black 34g polyamide black 34g Ø D E H Ø S symmetrical design hinges Hinges are made of 30% polyamide, pins are in 304 stainless steel. D E H S part number material finish weight polyamide black 16g polyamide black 18g polyamide black 28g polyamide black 40g Ø D E H Ø S 62
13 Hinges / ontinuous hinge ontinuous plastic hinge in 15,25 meter rolls Technical features : - Temperatures: -40 up to an be fixed with: rivets, screws, nails or clamps - hemical resistance : oil, solvents, sea water and most chemical agents - Tensile resistance : 180N/cm - Material offers excellent fatigue resistance material finish part number weight polypropylene white g polypropylene grey g polypropylene black g polypropylene white g polypropylene grey g polypropylene black g polypropylene white g polypropylene grey g polypropylene black g polypropylene white g polypropylene grey g polypropylene black g m Rolled knuckle continuous hinges «Imperial» dimension D E note material finish part number weight /8 undrilled 304 stainless steel raw g 6 1 1/ /8 undrilled 304 stainless steel raw g 6 1 1/4 3/64 1/8 3/4 undrilled 304 stainless steel raw g 6 1 1/2 3/64 1/8 3/4 undrilled 304 stainless steel raw g 6 2 3/64 1/8 3/4 undrilled 304 stainless steel raw g 6 2 1/16 5/32 5/8 undrilled 304 stainless steel raw g 7 2 1/4 1/16 5/32 5/8 undrilled 304 stainless steel raw g 6 2 1/2 1/16 5/32 5/8 undrilled 304 stainless steel raw g 6 2 3/4 1/16 5/32 5/8 undrilled 304 stainless steel raw g 7 3 1/16 5/32 5/8 undrilled 304 stainless steel raw g /4 1 1/4 undrilled 304 stainless steel raw g D () (E) (S) () 32
14 Hinges / Various hinges Plastic hinges Technical features : - Temperatures: -40 up to an be fixed with: rivets, screws, nails or clamps - hemical resistance: oil, solvents, sea water and most chemical agents - Tensile resistance: 180N/cm - Material offers excellent fatigue resistance S part number material finish weight polypropylene white 5g polypropylene black 5g ø (S) Technical features : - Temperatures: -40 up to an be fixed with: rivets, screws, nails or clamps - hemical resistance: oil, solvents, sea water and most chemical agents - Tensile resistance: 180N/cm - Material offers excellent fatigue resistance S part number material finish weight polypropylene white 5g polypropylene black 5g polypropylene white 5g polypropylene black 5g ø La solution charnières et verrouillages
15 La solution charnières et verrouillages Hinges / Various hinges Plastic hinges Technical features : - Temperatures: -40 up to an be fixed with: rivets, screws, nails or clamps - hemical resistance: oil, solvents, sea water and most chemical agents - Tensile resistance: 180N/cm - Material offers excellent fatigue resistance S part number material finish weight polypropylene white 16g polypropylene black 16g ø 90 Technical features : - Temperatures: -40 up to an be fixed with: rivets, screws, nails or clamps - hemical resistance: oil, solvents, sea water and most chemical agents - Tensile resistance: 180N/cm - Material offers excellent fatigue resistance E H S part number material finish weight polypropylene white 35g polypropylene grey 35g polypropylene black 35g polypropylene white 50g polypropylene grey 50g polypropylene black 50g E H ø
16 Hinges / Various hinges Plastic hinges S part number material finish weight polypropylene white 20g polypropylene black 20g pvc grey 20g polycarbonate transparent 20g polyethylene natural 20g 8.7 Ø ø 90 part number material finish weight polypropylene white 20g polypropylene black 20g pvc grey 20g polycarbonate transparent 20g Ø La solution charnières et verrouillages
1-103 Slide Shoe for Cams
1-103 Slide Shoe for Cams Slide shoe for cams, 2 parts, consisting of housing and latch. Matching cams as of 35 mm, steel product system 1.102 and stainless steel product system 7-080, in combination with
Carbon Kevlar hinges
arbon Kevlar hinges arbon Kevlar hinges arbon Kevlar hinges - 36 mm width inge is constructed of rigid leaves and a fl ex unit. The rigid leaves are wowen carbon fi bre in an epoxy matrix. The Kevlar fl
4 243 Hinge Pr detent for nested door. Material: Hinge Parts: zinc die, black coated
4 243 Hinge Pr01 180 detent for nested door Heavy Duty Detent Hinge with an opening angle of 180 and latching positions at -5, 85 and 175. The negative latching position can keep the door firmly shut even
4 100 Concealed Hinge Pr02 90
4 100 oncealed Hinge Pr02 90 oor bending 20mm for nested door 90 oncealed Hinge for RH or LH application. The 2 main hinge parts have a central guide to prevent door sagging during adjustment. Material:
Material: Hinge Parts: zinc die, matt chrome plated, or zinc die, matt black. Pin: stainless steel Nut plate: steel, zinc plated
4-249 Hinge Pr01 180 Small elegant hinge. 180 Opening. Adjustments are possible with respective bores provided. The nut plate can be mounted in different ways, according to the application. zinc die, matt
Telescopic Cover Support
6-170.01 Telescopic Cover Support long, steel zinc plated Telescopic Cover Support for covers and desk-leafs with automatic locking and release device. Extending the telescopic cover support completely,
Hinges. Various hinges. Stainless steel hinge with removable pin. Removable pin hinges with nylon washers. Removable pin.
Stainless steel hinge with removable pin Removable pin. Part number Material Finish Weight (g) 52-1-3877 304 stainless steel gloss 60 94.5 1.5 4 50 ø 6 ø 5 20 42 10 45 () 74.5 5.5 Removable pin hinges
. Ball catch and counterpart: brass or brass, chrome plated
www.dirak.com 6-130 Dual Ball Catch Material:. Ball catch and counterpart: brass or brass, chrome plated. Spring: stainless steel Ball: stainless steel chrome Ball catch Counterpart Assembly brass plated
Visual index NEW PRODUCTS NEWS NEWS PHARMA PHARMA PHARMA. To be continued on next page
NEWS 3 2013 Visual index Stainless Stainless 2012 NEW PRODUCTS Stainless NEWS Pin with weldable fastening button Stainless Panel fastening p.n1 button Stainless p.n2 Aluminium hinge external fastening
Quarter-Turn Pr20.1 L18
1-100.01 Quarter-Turn Pr20.1 L18 for cutout 20.1, length 18, low profi le 15 Nm IP 65/67 Specially low profile Quarter-Turn. RH or LH application. This Quarter-Turn consists of three basic parts which
Code no. 61 STAINLESS STEEL 316 HINGES
Code no. 61-003 Stainless steel pin diameter 7 mm. With stainless steel washers and 6 countersunk holes for M5 screws. L 76 x 76 x 2.5 mm, pin dia = 7 mm R/H Stainless steel pin diameter 7 mm. With stainless
4-393 Concealed Hinge Pr02 120
4-393 Concealed Hinge Pr02 120 Lift-off, for nested door, snap-in Concealed Hinge for nested door. Can be applied both at the top and at the bottom of the door. Small space requirement. simple clip-in
Hinges. Concealed hinges. Concealed hinge 90 opening
oncealed hinges oncealed hinge 90 opening Pins and links in 430 stainless steel Mounting features: - For nested doors or surface mounted doors. - LH or RH options. - For horizontal or vertical applications.
ACCESSORIES ACCESSORIES 2150 DRAWING POCKET (A4) 2152 DRAWING POCKET (A5) 2220 CIRCULAR INSPECTION WINDOW 2215 COUNTER SCREEN
ACCESSORIES GROUP NAME 2150 DRAWING POCKET (A4) 2152 DRAWING POCKET (A5) 2220 CIRCULAR INSPECTION WINDOW 2216 COUNTER SCREEN 2215 COUNTER SCREEN 24XX 240X EYEBOLT CAGE NUT 340.00.135 TOGGLE LATCH 340.00.133
Slam-Cam Page. Material: a) Slam-Cam: zinc die, chrome plated Spring: steel, zinc plated Washer: Teflon
Slam-Cam Page 1-264 Slam-Cam for Slam Doors. Locking without key or tool. To a): The Teflon washer replaces the wave washer underneath the insert. Used with all Quarter- Turns and inserts according to
Inserts for square and rectangular tubes
Inserts for square and rectangular tubes 35 Outer tube dimensions Ribbed inserts/plugs with smooth sliding surface for square and rectangular tubes. The tube inserts are suitable for tubes with a wall
FCT convoluted tubing. Operating Temperature
FCT Convoluted Tubing FCT convoluted tubing is manufactured from PA6 and offers superior protection from oils, fuels and solvents. FCT is light and flexible, but provides excellent crush and abrasion resistance.
Plexo 3 weatherproof cabinets
87045 LIMOGES Cedex Telephone: +33 (0)5 55 06 87 87 Fax: +33 (0)5 55 06 88 88 Plexo 3 weatherproof cabinets CONTENTS PAGES 1. Description, use.....1 2. Range, equivalence table...1 3. Overall dimensions...2
Linkeo 19 freestanding cabinets
Linkeo 19 freestanding cabinets Catalogue number(s): 6 467 50/51/55/56/60/61/62/63 Page 1.Generalcharacteristics...1 2.Range...2 3. Technical characteristics.................3 4.Dimensions...4 5.Baying...8
Linkeo 19 freestanding cabinets Flat-pack solutions
Page 1.Generalcharacteristics...1 2.Range...2 3. Technical characteristics.................3 4.Packaging...4 5.Dimensions...4 6.Baying...8 7.Plinths...9 8.Cablemanagement...9 9.Fankits... 11 10.PDUsupports...
Technical Notes To DIN 933, ISO 4017.
Hexagon Head Bolts wit tread up to ead, DIN 933, 6101 d l A/F A0013.A6 6101 To DIN 933, ISO 4017. Order No. Tread l A/F Finis A0013.050-020-A6-00 M 5 20 3,5 8 unfinised A0013.050-025-A6-00 M 5 25 3,5 8
Function: Used to connect profiles at adjustable angles. Features: 1. Adjustable angles. Item Description For Screw Weight (g) Colour Finish Material
4.56 Swivel Fastener (SWF): Function: Used to connect profiles at adjustable angles. 1. Adjustable angles. SWF 1.25.0132.0 8 M6x S3.60 M6 S3.61 M6x S3.60 Item Description For Screw Weight (g) Colour Finish
STEEL CUPBOARD LOCKS FIRE-HOSE CABINET LOCK
013 IRE-HOSE CABINET LOCK Designed for fire-hose cabinet Special fixing plate supplied for easy fixing lush design provides flat surface on cabinet Customized colours available ire hose cabinet BODY: KNOB:
CAM LOCKS CAM LOCK DD-CC ZAMAK - CHROME DD-CC ZAMAK - BLACK COATED DD-CC PLASTIC C C D D. web
063 LOCK ø 063 1-1-DD-CC ZAAK - CHROE 063 1-2-DD-CC ZAAK - BLACK COATED 063 2-0-DD-CC PLASTIC Quarter-turn operation Body length 20.5 mm (Please be sure to order appropriate cam) Available in all die-cast
Engineered installation products Solutions for control panel applications
Engineered installation products Solutions for control panel applications 2 Engineered installation products Solutions for control panel applications Solutions for control panel applications ABB introduces
Components: Dimensions / Order Codes
Components: Dimensions / Clamp Body ingle Design L B L L Clamp Body tandard Materials Thermoplastic Elastomer (87 hore-a) Colour: Black Material code: A ee page A90 for material properties and technical
C A B L E C O N N E C T O R S
Quality in connection! Elematic Cabling Systems offers a large and complete range of crimping terminals, lugs and terminal blocks to satisfy the most different connection requirements in the widest application
INDEX - ALUMINIUM RANGE HINGES. profile 0.35 N.m. FinAlu continuous hinge 466. profile 0.70 N.m. Aluminium profile continuous hinge - 50 mm
LUMINIUM RNGE INEX - LUMINIUM RNGE HINGES Finlu continuous hinge 466 luminium profile continuous hinge - 50 mm Rolled knuckle continuous hinge - 20 mm width Rolled knuckle continuous hinge - 25 mm width
Weld-on Hinges Weld-on Hinges
54 53 Weld-on Hinges 7004.00 Satin Brass Washer Pin Grease Nipple Weld-on Hinges 7004.90 Aluminium Satin Stainless Washer Stainless Pin Grease Nipple 55 Weld-on Hinges 7005.00.080, 7005.00.100 Satin Brass
HINGES Weld-on Hinges Steel. Weld-on Hinges Steel. MATERIAL Steel. FINISH Raw. FEATURES Brass Washer Steel Pin Grease Nipple
47 48 Weld-on Hinges 7004.00 Raw Brass Washer Pin Grease Nipple Weld-on Hinges 7010.00 Raw Brass Washer Pin 49 Weld-on Hinges 7005.00.080, 7005.00.100 Raw Brass Washer Brass Pin Grease Nipple 7005.00.080
01/2014. Mod: C4.8B/PM. Production code: (O2)
0/204 Mod: C4.8B/PM Production code: 0702720-0-0-0 (O2) Model / Modèle / Modell Line / Ligne / Serie DIAMOND PANEL OF THE FRAME AND DOOR/ PANNEAU DU CERCEAU ET LA PORTE/WAND DES RAHMENS UND DER TÜR 2 ACCESSORIES/
12/2013. Mod: C13.3A/10PM. Production code:
2/203 Mod: C3.3A/0PM Production code: 0703726-0-0-0 Model / Modèle / Modell Line / Ligne / Serie DIAMOND PANEL OF THE FRAME AND DOOR/ PANNEAU DU CERCEAU ET LA PORTE/WAND DES RAHMENS UND DER TÜR 2 ACCESSORIES/
Viale Borri Varese - Italy IDROBOARD weatherproof cabinets Cat. Nos :
Viale Borri 231 21100 Varese - Italy IDROBOARD weatherproof cabinets Cat. Nos : Index Pages 1. Description - Use... 2 2. Range...2 3. Overall dimensions...2 4. General characteristics...3 5. Setting in
PULL HANDLES THERMOPLASTIC CAST IRON ALUMINUM STAINLESS STEEL BIG HAND STYLE P U L L H A N D L E S
473 THERMOPLASTIC CAST IRON P U L L H A N D L E S ALUMINUM PULL HANDLES Manual Clamps 9 TriMax Vises 81 Pneumatic Workholding 121 Supports, Stops & Set Up Accessories 137 Precision Tooling Plates, Blocks
PREMIUM PLASTIC PROTECTION PARTS
PREMIUM PLASTIC PROTECTION PARTS MATERIAL OPTIONS Consistently low prices EP 180 Pressure Pipe Protection Uniplugs for PVC pipes DN 50 DN 600 EP 190 Driveshaft Protection Caps with Fitting Key EP 200 Stud
Components: Dimensions / Order Codes
Light Series LB Components: Dimensions / Order Codes Clamp Body Single Design ø D 2 B ø D 3 H S ø D 1 L2 L3 Order Codes Clamp Body Standard Materials Polypropylene Colour: Black Material code: PP Polyamide
Components: Dimensions / Order Codes. Clamp Body * *1*06*PP * * * * Clamp Body. ød2. Pipe / Tube / Hose Bore (1 Clamp Body)
ød Components: Dimensions / Order Codes Clamp Body ød B H L L L Clamp Body Colour: Green Material code: PP Colour: Black Material code: PA See page A88 for material properties and technical information.
KEEP YOUR FURNITURE AND EQUIPMENT PROTECTED
KEEP YOUR FURNITURE AND EQUIPMENT PROTECTED Our transit protection range is perfect for securing items from damage during transit. Check out our economical and easy ways to keep your furniture safe. We
Technical Information
Technical Information Materials ISO- Code Material Colour Operating Temperature PA Polyamide Light grey PP PP-EL natural PP PVDF PVDF-EL PFA PTFE PTFE-EL PEEK Polypropylene Polypropylene Polypropylene
ALLROUNDER 630 A. Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100.
Facts and figures ALLROUNDER Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100 www.arburg.com Machine dimensions 2217 227 1487 max. 450 877
AWEA MECHANTRONIC CO., LTD. AGENT ISO 9001 ISO 14001
AWEA MECHANTRONIC CO., LTD. HEADQUARTERS 629, Suezhetou Section, Kwanpu Rd., Wenshan Li, Hsinpu, Hsinchu 305, Taiwan TEL : +886-3-588-5191 FAX : +886-3-588-5194 Website : www.awea.com CENTRAL TAIWAN SCIENCE
Stainless Steel Products
/1 Stainless Steel Products Group code Product name 016 Push to close 11 T handle heavy duty lock 060 Quarter turn with spring 066 Mini quarter turn with spring 064 Quarter turn with spring 02 Swing handle
Solenoid Valve, Plastic
Solenoid Valve, Plastic Construction The EMÜ directly controlled 2/2-way plastic solenoid valve has a high performance coil which is hermetically separated from the medium by means of a flexible PTFE bush.
ISO DRY CONTAINER REPAIRING SPARE PARTS CATALOG Edition
ISO DRY CONTAINER REPAIRING SPARE PARTS CATALOG 2015 Edition NO. ITEM PART NO. SIZE SPEC PAGE 1 Roof Panel CIMC-D01-01 2.0X1045X2356 5 Corr. 1 CIMC-D01-05 2.0X1045X600 5 Corr. Patch CIMC-D01-05-2 2.0X1045X1200
ABOUT KJN ALUMINIUM PROFILES
P R O D U C T C ATA L O G U E ABOUT KJN ALUMINIUM PROFILES Our range of Aluminum Profile is available in a large range of sizes starting with 20 x 20 through to 100 x 200 making it suitable to use in all
New Products 10/2018. New EOAT Components
New Products 10/2018 New OT omponents Tubular Remarks The brochure has been created with the most possible diligence. ll details are based on experiential determined values, accurate calculations, and
PLASTIC RIVETS & SCREWS
PLASTIC RIVETS & SCREWS TR Kuhlmann is recognised throughout the industry for world class products & services We manufacture, stock & distribute a vast range of industrial fasteners & components Edition
ALUMINIUM PROFILE SYSTEM SERIES 40
ALUMINIUM PROFILE SYSTEM SERIES With the basic grid mm (slot 5); mm (slot 6), 16mm, mm and 0mm (slot ). In addition to this, the complete connection technology and a large range of accessories. TABLE OF
SUPREME. Catalogue 2016/18 NEW. Fasteners and Components EXPANDED MATERIAL RANGE BLACK MOULDED SHOULDER WASHERS
NEW BLACK MOULDED SHOULDER WASHERS SUPREME Fasteners and Components Australia s Leading Supplier of High Quality Plastic Fasteners and Components Catalogue 2016/18 EXPANDED MATERIAL RANGE Natural Nylon
Facts and figures ALLROUNDER 1500 T
Facts and figures ALLROUNDER 15 T Table diameter: 59.6 (15 mm) Clamping force: 176, 22, 275, 35 tons : 3.7 oz, 6.1 oz, 8.2 oz, 15.3 oz, 29.1 oz, 45.4 oz www.arburg.com 15 T Machine dimensions up to 22
well adjusted Round, wing and spindle-shaped knobs with the same standardised design and with matt surface.
104 combination knobs Order data on pages 194-199 well adjusted the product The name COMBINATION S stands for an exceedingly functional range of rotary buttons with a reliable collet fixture system. They
SKINTOP ST-M, increased oil-resistant plastic cable gland with variable clamping ranges, permanent vibration protection, for offshore platforms
PRODUCT INFORMATION, increased oil-resistant plastic cable gland with variable clamping ranges, permanent vibration protection, for offshore platforms Info Now with IP69 approval! Proven to withstand the
KFE. Power-operated compensating chuck. Techincal features
Power-operated compensating chuck Techincal features Toggle joint lever system Compensation for eccentricities is accomplished by means of a universal ball joint. Large through-hole Made of steel All moving
EASyS seating system - Ergonomic Adjustment and Safety System
EASyS Technical Manual EASyS seating system - Ergonomic Adjustment and Safety System Models Positioning supports & harnesses Safety & protection Accessory for J chassis INDEX EASyS,... the ergonomic adjustment
6 MAINTENANCE AND WORKSHOP
EUROPEAN STANDARD SINCE 1963 6 MAINTENANCE AND WORKSHOP www.intertruck.com INDEX BALL JOINTS 329 COTTER PINS 330 CABLE TIES 331 TAPE 332 ASSORTMENT CASES 333 INSPECTION LIGHTS 334 TEST APPLIANCES 335 328
ALLROUNDER 520 A. Distance between tie bars: x (520 x 520 mm) Clamping force: 165 tons Injection unit: 6.1 oz, 8.2 oz, 15.
Facts and figures ALLROUNDER 52 A Distance between tie bars: 2.47 x 2.47 (52 x 52 mm) Clamping force: 165 tons Injection unit: 6.1 oz, 8.2 oz, 15.3 oz www.arburg.com 52 A Machine dimensions 78.8 53.7 33.44
Translation of the original mounting instruction. Mounting instruction drop side
Translation of the original mounting instruction Mounting instruction drop side Instruction number: 1375693 Document: FB45110A page 1 of 13 Instruction number: 1375693 Document: FB45110A page 2 of 13 Contents
Acoustic humidity sensitive air inlet. Technical specifications
Acoustic humidity sensitive air inlet Technical specifications Copyright Aereco. Data and pictures not contractual. Some characteristics may vary. Aereco S.A keeps the right to modify any characteristic
PREINSULATED COPPER TERMINALS
PREINSULATED COPPER TERMINALS : Connector material: electrolitic tinned copper (purity grade 99,9%) Insulation: polypropylene According to the norms: Humidity absorption: DIN 46228/4 - DIN 47002 for the
PANEL PLATES MG VRT A
1 PANEL PLATES MG VRT A self adhesive, customisable MG VRT A rigid PVC panel plates are used to create name plates, rating plates, data plates using company logos, technical data, serial numbers, EC certification,
Dinosaur Flexible Wiring Duct
Dinosaur Flexible Wiring Duct Dinosaur self-adhesive flexible duct is ideal for transporting wiring to cabinet doors from control panel interiors (for that part of the cable run that leans against the
PA6 PPmod (High Temp) PP (Standard)
P6 PPmod (High Temp) PP (Standard) P6 (Nylon) is ideal for applications that require a conduit with high impact and abrasion protection with outstanding chemical resistance. P6 (Nylon) conforms to FMVSS302,
VEROTEC Electronics Packaging
VEROTEC Electronics Packaging KM6 Front Panels & Plug-in Units KM6 Front Panels and Plug-In-Units F R O N T P A N E L S Verotec offers an extensive range of front panels and plug-in units that meet the
Plug 16A 2P+E extra flat Wireable (body length up to 50 mm) SPA17. Plug 10A 2P+E straight S11. Plug 16A 2P+E straight S30. Plug 16A angled S30
CONTROL DEVICE REFERENCE STANDARDS UNSWITCH SOCKET OUTLETS EN 60669-1 Switches for household and similar fixed-electrical installation. Part 1: general requirements. Rated current: 10A-13A-15A-16A Rated
Components: Dimensions / Order Codes Clamp Body. * 1st part of STAUFF Group 4. * Exact outside diameters Ø D1 / Ø D2 (mm) Clamp Body.
Components: Dimensions / Order Codes Clamp Body Clamp Body Colour: Green Material code: PP 4 PP One clamp body is consisting of two clamp halves. 1st part of STAUFF 4 Exact outside diameters Ø D1 / Ø D2
Wiring Duct T1 Series - Slotted
Duct T1 Series - Slotted UL file E123572 T1 Series Gray Open Slot Rigid PVC (including cover) Catalog Standard Carton Package Quantity Price Catalog Single Piece Pkg Package Quantity Price T1-0506G 20
ov-shoulder_screws_divider - Updated Shoulder Screws
ov-shoulder_screws_divider - Updated - 09-01-2017 Shoulder Screws Product Overview & Shoulder Bolts Steel shoulder screws These are our least expensive option. They are produced to ISO 7379 standards.
ALLROUNDER 320 C GOLDEN EDITION
Facts and figures ALLROUNDER 32 C GOLDEN EDITION Distance between tie bars: 12.6 x 12.6 (32 x 32 mm) Clamping force: 55 tons Injection unit: 2.3 oz, 3.7 oz www.arburg.com 32 C GOLDEN EDITION Machine dimensions
800 m. Metric Stainless Steel Pipe Seamless to EN ISO 1127 Produced in approx. 6 m lengths other material, dimensions or welded pipe on request 8.
Metric Stainless Steel Pipe Seamless to EN ISO 1127 Produced in approx. 6 m lengths other material, dimensions or welded pipe on request S 800 m max. operating pressure for 1.4301 for 1.4571 x s PB -No
HYDRA (IP65 / IP66) Tight enclosures made of glass-fibre reinforced polyester (GRP) tel fax
HYDR (IP65 / IP66) Tight enclosures made of glass-fibre reinforced polyester (GRP) Z.U.P. EMITER Sp. j. ul. Skrudlak 3 34-600 Limanowa Poland tel. 0048 18 337 00 94 fax 0048 18 333 76 41 export@emiter.com
SP / LP SERIES. Ultra Performance Bridge Type Vertical Machining Center AWEA MECHANTRONIC CO., LTD. ISO 9001 ISO 14001
AWEA MECHANTRONIC CO., LTD. HEADQUARTERS 629, Suezhetou Section, Kwanpu Rd., Wenshan Li, Hsinpu, Hsinchu 5, Taiwan TEL : +886-3-588-5191 FAX : +886-3-588-5194 Website : www.awea.com CENTRAL TAIWAN SCIENCE
SEA FLASH. A small, robust, high powered automatic flashing SOLAS approved Lifejacket Light.
SEA FLASH United Moulders Limited A small, robust, high powered automatic flashing SOLAS approved Lifejacket Light. TECHNICAL SPECIFICATION and OPERATING INSTRUCTIONS FOR THE SEA FLASH. Product Code Type
The universal sliding door system for all furniture segments. SlideLine
The universal sliding door system for all furniture segments. SlideLine On-trend sliding door applications made easy SlideLine Sliding doors are becoming increasingly popular for furniture throughout
13.1. Range of Enclosures. KRONECTION Box A 2 for up to 2 pairs. Expert Knowledge. Short survey of the KRONECTION Box A 2 for up to 2 pairs
KRONECTION Box A 2 for up to 2 pairs Short survey of the KRONECTION Box A 2 for up to 2 pairs The KRONECTION Box A 2, which is equipped with connection contacts on the right and left, serves as a line
Fuel & diesel tanks Drink water tanks Gray water tanks Black water tanks Other nautic equipment
Fuel & diesel tanks Drink water tanks Gray water tanks Black water tanks Other nautic equipment factories ROTO is a global producer of high-quality plastic products from polyethylene, polypropylene, polyamide,
N086, N186, N786. Pressure retaining valve, Plastic
Pressure retaining valve, Plastic Construction The GEMÜ N086, N186 and N786 pressure retaining valves are used to provide a constant back pressure in process plant. If the inlet pressure rises above a
WORKSHOP, SERVICE AND SAFETY WORKSHOP, SERVICE AND SAFETY
WORKSHOP, SERVICE AND SAFETY 1201 BEARINGS BEARINGS Large stock of roller bearings, ball bearings, angular contact ball bearings, tapered bearings, spherical roller bearings and thrust ball bearings. AETNA,
Slide Unit Spare Parts List LE VRL SB T02 Spare parts
Slide Unit Spare Parts List LE 60- VRL SB T02 Spare parts 10 248174 1 base plate LE 60-248178 4 cover complete LE 60 R 30 248179 2 piston LE 60 251753 2 push rod LE 60-50 251716 2 locking clamp LE 60 (see
Diaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The GEMÜ pneumatically operated 2/2-way valve has a low maintenance piston actuator which can be controlled by inert gaseous media. It has an integral optical position
parts manual TF110R-TRS vacuum sweeper
parts manual TF110R-TRS vacuum sweeper Section 1 Ref- Nr. Part No. Description Quant. Spec. D27 102216 Rivet 2 Niete 4x16,7F D32 102221 Rivet 16 Avex-Niet 2x12,6 D45 102234 Screw 5 3,5x16 DIN 10 D47 102236
TABLE OF CONTENTS SERIES 40
TABLE OF CONTENTS SERIES ALUMINIUM PROFILES SERIES PAGE Technical data and profile cross-sections 2.4-2.17 Processing of profiles for connectors 2.1-2.19 Prices of aluminium profile processing 2. Aluminium
Facts and figures ALLROUNDER 375 V. Vertical free-space system Clamping force: 500 kn Injection unit (acc. to EUROMAP): 100, 170, 290.
Facts and figures ALLROUNDER 375 V Vertical free-space system Clamping force: 500 kn Injection unit (acc. to EUROMAP): 100, 1, 290 www.arburg.com 375 V Installation dimensions Vertical version 1050 850
ALLROUNDER 570 S. Distance between tie bars: x (570 x 570 mm) Clamping force: 176, 220, 242 tons Injection unit: 8.2 oz, 15.3 oz, 29.
Facts and figures ALLROUNDER 57 S Distance between tie bars: 22. x 22. (57 x 57 mm) Clamping force: 176, 22, 22 tons Injection unit: 8.2 oz, 15.3 oz, 29.1 oz www.arburg.com 57 S Machine dimensions 78.7
Catálogo Asas, Punhos e Manetes
. Catálogo Asas, Punos e Manetes Loja: Av. Sacadura Cabral n.º37 A 1000-272 Lisboa el. 217940473 Fax 217969890 Escritório: Rua avid de Sousa n.º19 1000-105 Lisboa el.217906904 Fax 217906906 Bridge andles
Indexing Plunger 417. Triangular Knobs, Made from Plastic. Triangular Knobs, Made from Stainless Steel
Standard Parts for Operating - Overview Cam-Action Indexing Plungers / Indexing Plungers Cam-Action Indexing Plunger 612, Made from Steel and Stainless Steel Page 532 Page 533 Indexing Plunger 417 Indexing
SP / LP SERIES. Ultra Performance Bridge Type Vertical Machining Center AWEA MECHANTRONIC CO., LTD. ISO 9001 ISO 14001
SP / LP SERIES Ultra Performance Bridge Type Vertical Machining Center AWEA MECHANTRONIC CO., LTD. HEADQUARTERS 629, Suezhetou Section, Kwanpu Rd., Wenshan Li, Hsinpu, Hsinchu 5, Taiwan TEL : +886-3-588-5191
ALLROUNDER 270 S. Distance between tie bars: x (270 x 270 mm) Clamping force: 28, 38, 44 tons Injection unit: 1.4 oz, 2.3 oz, 3.
Facts and figures ALLROUNDER 27 S Distance between tie bars: 1.63 x 1.63 (27 x 27 mm) Clamping force: 28, 38, 44 tons Injection unit: 1.4 oz, 2.3 oz, 3.7 oz www.arburg.com 27 S Machine dimensions 78.35
SPARE PARTS BOOK. Front Axle SSDP-12-S. Book No. 209 (4/2010)
SPARE PARTS BOOK Front Axle Sisu Axles, Inc. Autotehtaantie 1 PO Box 189 FIN-13101 Hameenlinna Finland Phone +8 20 2999 Fax +8 20 2900 16.8.2012 1 Axle L96 2 22 2 7 8 9 10 20 21 1 26 27 22 2 23 19 13 21
Stirrup-shaped handles, machine handles, apparatus handles
Stirrup-shaped handles, machine handles, apparatus handles 231 K0186 Stirrup-shaped handles GJS 400 Deburred and tumble cleaned; black plastic coated; machined contact faces. KIPP Stirrup-shaped handles
Diaphragm seal with threaded connection Plastic version Model
Pressure Diaphragm seal with threaded connection Plastic version Model 99.31 WIKA data sheet DS 99. for further approvals see page 5 Applications For aggressive, corrosive or environmentally hazardous
WÜRTH Industrie Service WÜPLAST. Screws for thermoplastics
WÜRTH Industrie Service WÜPLAST Screws for thermoplastics W-KLT - SICHER, FLEXIBEL Table of contents: page Introduction 2 WÜPLAST 3 Thread geometry 4 Design and installation information 5-6 WÜPLAST product
Number of PG holes. 1 x PG 9 (Ø 15.5) 12 x PG 13.5 (Ø 21) 1 x PG 9 (Ø 15.5) /300/400/ Rittal Catalogue 32/Industrial Enclosures
us enclosures G. us enclosures Enclosure:.38 Door:.5 IP 65 to EN 60 59/09.00, complies with NEMA. Door with l/h hinge, cam lock with double-bit insert, () support rail(s) S 35/7.5 (for G 586.). Drilled
Evidence of Performance Burglar resistance
Test Report No. 16-001785-PR03 (PB-C01-05-en-01) Client ALUMIL S.A. Industrial Area 61100 Kilkis Greece Product Burglar resistant Smart SD77 glass door RC 2 Designation SMART DOORS Overall dimensions (W
VEROTEC Electronics Packaging
VEROTEC Electronics Packaging KM6 Front Panels & Plug-in-Units KM6 Front Panels and Plug-In-Units FRONT PANELS Verotec offers an extensive range of front panels and plug-in units that meet the requirements
Vents & Fuel Fittings. Vents & Ventilators Collector Boxes Pitot Tube Shield Deck Plates Deck Plate Keys
7 Vents & Ventilators Collector Boxes Pitot Tube Shield Deck Plates Deck Plate Keys Hose Adapter Drains Deck Fills Deck Fill Keys Gas Tank Vents Ski Tows Vents & Fuel Fittings 7 Vents & Fuel Fittings LOUVERED
Section 5 Doors and Door Components
0 Section Whether you re looking for plain doors, locking doors, sliding doors, or large walk-through doors, you ll find what you need on the following pages. Bosch offers two basic types of doors that
GEMÜ 205 Electrically operated solenoid valve
Electrically operated solenoid valve Features Hermetic separation between medium and actuator In case of power failure operation possible by manual override Standard integral optical position indicator
Delekatalog / Spare Parts LP5 & LP5+ LP5 & LP5+ - indhold:
LP5 & LP5+ - indhold: Handrail left LP5 Handrail left LP5+ Handrail right LP5+ Top plate assembly Safety list assembly incl. safety contacts Inner scissors Outer scissors Pull/drawbar with actuator Ramp
WÜRTH Industrie Service DE EN WÜPLAST. Screws for thermoplastics
WÜRTH Industrie Service DE EN WÜPLAST Screws for thermoplastics W-KLT - SICHER, FLEXIBEL Table of contents Page Introduction 2 WÜPLAST 3 Thread geometry 4 Design and installation information 5-6 WÜPLAST
Diagram # Part # Description Quantity
Diagram # Part # Description Quantity 55 016104-01MX Seat cushion L1, L2, without cover 55 016110-01MX Seat cushion L3, without cover 40 016417-01MX Subsystem L1, incl. air spring, without shock absorber,