Facts and figures ALLROUNDER 375 V. Vertical free-space system Clamping force: 500 kn Injection unit (acc. to EUROMAP): 100, 170, 290.
|
|
- Gerard Ross
- 6 years ago
- Views:
Transcription
1 Facts and figures ALLROUNDER 375 V Vertical free-space system Clamping force: 500 kn Injection unit (acc. to EUROMAP): 100, 1, 290
2 375 V Installation dimensions Vertical version ) ) ) ) ) ) Fixed mould mounting platen Fixed mould mounting surface Horizontal version ) Horizontal / vertical version 5) Electrical connection Cooling water connection Pneumatic connection ) ) ) 1) Injection unit 100 2) Injection unit 1 3) Injection unit 290 4) Additional control cabinet dependent on version 5) Position of cooling water connection can vary due to optional equipment 2
3 Technical data 375 V Clamping unit with clamping force max. kn V Version Standard Rotary table Shuttle table Opening force stroke max. kn mm Mould height, fixed variable min. mm Platen daylight fixed variable max. mm Table diameter mm Shuttle table stroke mm Angle of rotation, left/right Rotation time for 180 min. s --- 2,3 --- Weight on rotary/shuttle table max. kg Weight of movable mould half max. kg Ejector force stroke max. kn mm Dry cycle time EUROMAP ² min. s - mm Injection unit with screw diameter mm Effective screw length L/D , , ,5 Screw stroke max. mm Calculated stroke volume max. cm³ Shot weight max. g PS Material throughput max. kg/h PS 5,5 8 9, , ,5 24,5 max. kg/h PA6.6 2,8 4 4, ,5 10,5 12,5 Injection pressure max. bar Holding pressure max. bar Injection flow ² max. cm³/s Screw circumferential speed ² max. m/min Screw torque max. Nm Nozzle contact force retraction stroke max. kn mm Heating capacity zones kw 4,9 5 9,4 5 6,4 5 Feed hopper l Drive and connection with injection unit 100 Standard Rotary table Shuttle table Net weight of machine kg Sound press. level Insecurity ⁴ db(a) Oil filling l Drive power ² max. kw Electrical connection ³ kw Total A Machine A Heating A Cooling water connection max. C min. Δp bar 25 1,5 DN ,5 DN ,5 DN 25 Machine type with EUROMAP size designation ¹ 375 V Upon request: other machine types and mould installation heights, screws, drive powers, etc. All specifications relate to the basic machine version. Deviations are possible, depending on variants, process settings and material type. Depending on the drive, certain combinations, e.g. max. injection pressure and max. injection flow may be mutually exclusive. 1) Clamping force (kn) - large injection unit = max. stroke volume (cm³) x max. injection pressure (kbar) 2) Specifications depend on the drive variant / drive configuration. 3) Specifications relate to 400 V/50 Hz. 4) Detailed info in the operating instructions. [ ] Specifications apply to alternative equipment. 3
4 375 V Mould installation dimensions Cut-out in mould (if required) Y Ø B A Y 1 X R 300 Stroke max. 250 max Stroke max. Ejector bolt X Ø 125 without coupling element with coupling element Coupling element Stroke max ,5 max Ø 28 Ø 13,5 Ø 18,5 Injection in the mould parting line Variable a (set in accordance with mould parting line) 1) / 266 2)3) Cut-out in mould (if required) a b, fixed mould mounting platen, fixed mould mounting platen Mount for horizontal injection unit Splatter guard Mount for injection in the parting line Ø 50 Ø80 c 233 1) Injection unit 100 2) Injection unit 1 3) Injection unit 290 Injection positions with hydraulic nozzle Injection unit 100 Injection unit 1 Injection unit 290 a min a max b min c min
5 Mould installation dimensions 375 V Fixed mould mounting platen A M12-24 deep 420 Ø 10H8-13 deep Ø125 H (Free space up to C frame) 335 Ø125 H7 Rear safety door Ø 10H8-13 deep 195 Moving mould mounting platen B 375 5
6 375 V Rotary table dimensions Vertical version ) 2) 3) ) 2) 3) Rotary platen Rotary platen Horizontal version ) Non-contacting safety device (light curtain) Horizontal / vertical version 5) Electrical connection Cooling water connection 1) ) 3 3) 1) Injection unit 100 2) Injection unit 1 3) Injection unit 290 4) Additional control cabinet dependent on version 5) Position of cooling water connection can vary due to optional equipment 6
7 Mould installation dimensions for rotary table 375 V min.145 / max. 235 (set in accordance with mould parting line)* B A R 300 Stroke min. 250 max Ejector bolt (for gentle ejection) 29,5 +0,1 Ø 26 Mould Rotary table Fixed mould mounting platen, rotary table A 420 Usable mounting surface Ø 900 Rear safety door Moving mould mounting platen B 504 Ø 900 Ø 550 Couplings Cooling circuits M12-24 deep Ø 125H7 Ø 28 for hydraulic ejector M12-20 deep For installation in top mould half Non-contacting safety device (light curtain) max. R Ø 10H8-13 deep *) Maximum height: Observe mould parting line with ejector stroke or height of sprue in case of vertical injection unit 7
8 375 V Overall dimensions - sliding table Vertical version ) 2) 3) ) ) 3) Horizontal version 1078 Sliding platen 2202 Sliding platen 800 4) Horizontal / vertical version 5) *) 2400 Electrical connection Cooling water connection Pneumatic connection 1) 2) 3) ) Injection unit 100 2) Injection unit 1 3) Injection unit 290 4) Additional control cabinet dependent on version 5) Position of cooling water connection can vary due to optional equipment *) Non-contacting safety device (light curtain) 8
9 Mould installation dimensions - sliding table 375 V ( 291 ) Ejector bolt (for gentle ejection) 28 Height, sliding platen to mounting surface A 15 B R 300 Stroke max. 250 max ,5 +0,1 26 Mould Sliding table Sliding table A Usable mounting surface Ø 30 for hydraulic ejector Stroke 650 Stroke 650 Rear safety door M12-18 deep Ø 30 for hydraulic ejector Non-contacting safety device (light curtain) Ø 125 H7 Distance from sliding platen to bar 2 Height, sliding platen Moving mould mounting platen B 125 H Ø 10H3-13 deep M12-24 deep 9
10 375 V Shot weights Theoretical shot weights for the most important injection moulding materials Injection units according to EUROMAP Screw diameter mm Polystyrene max. g PS Styrene heteropolymerizates max. g SB max. g SAN, ABS 1) Cellulose acetate max. g CA 1) Celluloseacetobutyrate max. g CAB 1) Polymethyl methacrylate max. g PMMA Polyphenylene ether, mod. max. g PPE Polycarbonate max. g PC Polysulphone max. g PSU Polyamides max. g PA 6.6 PA 6 1) max. g PA 6.10 PA 11 1) Polyoximethylene (Polyacetal) max. g POM Polyethylene terephthalate max. g PET Polyethylene max. g PE-LD max. g PE-HD Polypropylene max. g PP Fluorpolymerides max. g FEP, PFA, PCTFE 1) max. g ETFE Polyvinyl chloride max. g PVC-U max. g PVC-P 1) ) average value ARBURG GmbH + Co KG Arthur-Hehl-Strasse Lossburg Tel.: contact@arburg.com With locations in Europe: Germany, Belgium, Denmark, France, United Kingdom, Italy, Netherlands, Austria, Poland, Switzerland, Slovakia, Spain, Czech Republic, Turkey, Hungary Asia: People s Republic of China, Indonesia, Malaysia, Singapore, Taiwan, Thailand, United Arab Emirates America: Brazil, Mexico, USA For more information, please go to ARBURG GmbH + Co KG The brochure is protected by copyright. Any utilisation, which is not expressly permitted under copyright legislation, requires the previous approval of ARBURG. All data and technical information have been compiled with great care. However we accept no responsibility for correctness. Individual illustrations and information may deviate from the actual delivery condition of the machine. The relevant valid operating instructions are applicable for the installation and operation of the machine. ARBURG GmbH + Co KG DIN EN ISO certified _EN_GB_ Subject to alterations
ALLROUNDER 370 E. Distance between tie bars: 370 x 370 mm Clamping force: 600 kn Injection unit (acc. to EUROMAP): 170, 290.
Facts and figures ALLROUNDER 37 E Distance between tie bars: 37 x 37 mm Clamping force: 6 kn Injection unit (acc. to EUROMAP): 17, 29 www.arburg.com 37 E Machine dimensions 215 122 85 12 33 435 192 245
More informationALLROUNDER 520 E. Distance between tie bars: 520 x 520 mm Clamping force: 1500 kn Injection unit (acc. to EUROMAP): 290, 400, 800.
Facts and figures ALLROUNDER 52 E Distance between tie bars: 52 x 52 mm Clamping force: 15 kn Injection unit (acc. to EUROMAP): 29, 4, www.arburg.com 52 E Machine dimensions 2 135 85 12 33 4 13 625 4885
More informationFacts and figures ALLROUNDER 275 V. Vertical free-space system Clamping force: 250 kn Injection unit (according to EUROMAP): 70, 100.
Facts and figures ALLROUNDER 275 V Vertical free-space system Clamping force: 250 kn Injection unit (according to EUROMAP):, 100 www.arburg.com 275 V Installation dimensions 900 665 1782 2880 1) 3025 2)
More informationALLROUNDER 570 H. Distance between tie bars: 570 x 570 mm Clamping force: 2000 kn Injection unit (acc. to EUROMAP): 400, 800, 1300.
Facts and figures ALLROUNDER 57 H Distance between tie bars: 57 x 57 mm Clamping force: 2 kn Injection unit (acc. to EUROMAP): 4, 8, 13 www.arburg.com 57 H Machine dimensions 22 148 85 438 2242 1) 2251
More informationALLROUNDER 720 H. Distance between tie bars: 720 x 720 mm Clamping force: 3200 kn Injection unit (according to EUROMAP): 1300, 2100, 3200
Facts and figures ALLROUNDER 72 H Distance between tie bars: 72 x 72 mm Clamping force: 32 kn Injection unit (according to EUROMAP): 13, 21, 32 www.arburg.com 72 H Machine dimensions 858 2198 max. 385
More informationALLROUNDER 570 C GOLDEN EDITION
Facts and figures ALLROUNDER 57 C GOLDEN EDITION Distance between tie bars: 57 x 57 mm Clamping force: 2 kn Injection unit (acc. to EUROMAP): 8 www.arburg.com 57 C GOLDEN EDITION Machine dimensions 255
More informationALLROUNDER 270 C GOLDEN EDITION
Facts and figures ALLROUNDER 2 C GOLDEN EDITION Distance between tie bars: 2 x 2 mm Clamping force: 4 kn Injection unit (acc. to EUROMAP):, 1 www.arburg.com 2 C GOLDEN EDITION Machine dimensions 85 33
More informationALLROUNDER 630 H. Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100.
Facts and figures ALLROUNDER 63 H Distance between tie bars: 63 x 63 mm Clamping force: 25 kn Injection unit (acc. to EUROMAP): 8, 13, 21 www.arburg.com 63 H Machine dimensions 858 438 1468 2198 max. 395
More informationALLROUNDER 520 A multi-component
Facts and figures ALLROUNDER 52 A multi-component Distance between tie bars: 52 x 52 mm Clamping force: 15 kn Injection unit: 29, 4, 8 horizontal 7, 17, 29 vertical www.arburg.com 52 A multi-component
More informationALLROUNDER 720 A Multi-component
Facts and figures ALLROUNDER 72 A Multi-component Distance between tie bars: 72 x 72 mm Clamping force: 32 kn Injection unit: 8, 13, 21 horizontal 7, 17, 29, 4 vertical www.arburg.com 72 A Multi-component
More informationALLROUNDER 820 S Multi-component
Facts and figures ALLROUNDER 82 S Multi-component Distance between tie bars: 82 x 82 mm Clamping force: 4 kn Injection unit: 21, 32, 46 horizontal 7, 1, 17, 29, 4 vertical www.arburg.com 82 S Multi-component
More informationALLROUNDER 270 A. Distance between tie bars: 270 x 270 mm Clamping force: 350 kn Injection unit (acc. to EUROMAP): 5, 70, 100.
Facts and figures ALLROUNDER 27 A Distance between tie bars: 27 x 27 mm Clamping force: 35 kn Injection unit (acc. to EUROMAP): 5, 7, 1 www.arburg.com 27 A Machine dimensions 238 122 12 425 254 438 191
More informationALLROUNDER 630 S. Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100.
Facts and figures ALLROUNDER 630 S Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100 www.arburg.com 630 S Machine dimensions 2183 5) 2207
More information820 S. Machine dimensions. Electrical connection. Cooling water connection 850 6) 878 7) 960 5) 113/438 4) ) ) ) )6) )
Facts and figures ALLROUNDER 820 S Distance between tie bars: 820 x 820 mm Clamping force: 4000 kn Injection unit (acc. to EUROMAP): 2100, 3200, 4600 www.arburg.com 820 S Machine dimensions 2250 5) 2342
More informationALLROUNDER 470 S Multi-component
Facts and figures ALLROUNDER 47 S Multi-component Distance between tie bars: 47 x 47 mm Clamping force: 11 kn Injection unit: 17, 29, 4 horizontal 3, 7, 1, 17, 29 vertical www.arburg.com Machine dimensions
More informationALLROUNDER 630 A. Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100.
Facts and figures ALLROUNDER Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100 www.arburg.com Machine dimensions 2217 227 1487 max. 450 877
More informationALLROUNDER 720 S Multi-component
Facts and figures ALLROUNDER 72 S Multi-component Distance between tie bars: 72 x 72 mm Clamping force: 32 kn Injection unit: 13, 21, 32 horizontal 7, 1, 17, 29, 4 vertical www.arburg.com 72 S Multi-component
More informationALLROUNDER CUBE 2900
Facts and figures ALLROUNDER CUBE 29 Distance between tie bars: 82 x 82 mm Clamping force: 29 kn Injection unit: 4, 8, 13, 21, 32 horizontal 7, 17, 29, 4, 8, 13 moving www.arburg.com CUBE 29 Machine dimensions
More informationALLROUNDER 470 S. Distance between tie bars: 470 x 470 mm Clamping force: 800, 1000, 1100 kn Injection unit (acc. to EUROMAP): 170, 290, 400
Facts and figures ALLROUNDER 470 S Distance between tie bars: 470 x 470 mm Clamping force: 800, 1000, 1100 kn Injection unit (acc. to EUROMAP):, 290, 400 www.arburg.com 470 S Machine dimensions 585 330
More informationALLROUNDER 520 S. Distance between tie bars: 520 x 520 mm Clamping force: 1300, 1500, 1600 kn Injection unit (acc. to EUROMAP): 290, 400, 800
Facts and figures ALLROUNDER 520 S Distance between tie bars: 520 x 520 mm Clamping force: 1300, 1500, 1600 kn Injection unit (acc. to EUROMAP): 290, 400, www.arburg.com 520 S Machine dimensions 580 330
More informationALLROUNDER 520 A. Distance between tie bars: x (520 x 520 mm) Clamping force: 165 tons Injection unit: 6.1 oz, 8.2 oz, 15.
Facts and figures ALLROUNDER 52 A Distance between tie bars: 2.47 x 2.47 (52 x 52 mm) Clamping force: 165 tons Injection unit: 6.1 oz, 8.2 oz, 15.3 oz www.arburg.com 52 A Machine dimensions 78.8 53.7 33.44
More informationFacts and figures ALLROUNDER 1500 T
Facts and figures ALLROUNDER 15 T Table diameter: 59.6 (15 mm) Clamping force: 176, 22, 275, 35 tons : 3.7 oz, 6.1 oz, 8.2 oz, 15.3 oz, 29.1 oz, 45.4 oz www.arburg.com 15 T Machine dimensions up to 22
More informationALLROUNDER 320 C GOLDEN EDITION
Facts and figures ALLROUNDER 32 C GOLDEN EDITION Distance between tie bars: 12.6 x 12.6 (32 x 32 mm) Clamping force: 55 tons Injection unit: 2.3 oz, 3.7 oz www.arburg.com 32 C GOLDEN EDITION Machine dimensions
More informationALLROUNDER 570 S. Distance between tie bars: x (570 x 570 mm) Clamping force: 176, 220, 242 tons Injection unit: 8.2 oz, 15.3 oz, 29.
Facts and figures ALLROUNDER 57 S Distance between tie bars: 22. x 22. (57 x 57 mm) Clamping force: 176, 22, 22 tons Injection unit: 8.2 oz, 15.3 oz, 29.1 oz www.arburg.com 57 S Machine dimensions 78.7
More informationALLROUNDER 270 S. Distance between tie bars: x (270 x 270 mm) Clamping force: 28, 38, 44 tons Injection unit: 1.4 oz, 2.3 oz, 3.
Facts and figures ALLROUNDER 27 S Distance between tie bars: 1.63 x 1.63 (27 x 27 mm) Clamping force: 28, 38, 44 tons Injection unit: 1.4 oz, 2.3 oz, 3.7 oz www.arburg.com 27 S Machine dimensions 78.35
More informationALLROUNDER 520 H. Distance between tie bars: 520 x 520 mm Clamping force: 1500 kn Injection unit (acc. to EUROMAP): 290, 400, 800
ALLROUNDER 520 H Distance between tie bars: 520 x 520 mm Clamping force: 1500 kn Injection unit (acc. to EUROMAP): 290, 400, 800 MACHINE DIMENSIONS 520 H 2002 1348 255 849 120 330 max. 385 438 507 800
More informationALLROUNDER 570 E. Distance between tie bars: 570 x 570 mm Clamping force: 2000 kn Injection unit (acc. to EUROMAP): 400, 800
ALLROUNDER 570 E Distance between tie bars: 570 x 570 mm Clamping force: 2000 kn Injection unit (acc. to EUROMAP): 400, 800 MACHINE DIMENSIONS 570 E 1900 850 150 330 520 1285 825 435 605 1000 280 5185
More informationALLROUNDER 470 A. Distance between tie bars: 470 x 470 mm Clamping force: 1000 kn Injection unit (acc. to EUROMAP): 170, 290, 400
ALLROUNDER 470 A Distance between tie bars: 470 x 470 mm Clamping force: 1000 kn Injection unit (acc. to EUROMAP):, 290, 400 MACHINE DIMENSIONS 470 A 840 330 438 1302 2050 2124 1)2) 2139 3) 400 1109 max.
More informationALLROUNDER 920 A. Distance between tie bars: 920 x 920 mm Clamping force: 4600, 5000 kn Injection unit (acc. to EUROMAP): 1300, 2100
ALLROUNDER 920 A Distance between tie bars: 920 x 920 mm Clamping force: 4600, 5000 kn Injection unit (acc. to EUROMAP): 1300, 2100 MACHINE DIMENSIONS 920 A 877 239 707 1100 2229 1207 1697 2671 max.430
More informationALLROUNDER 820 A. Distance between tie bars: 820 x 820 mm Clamping force: 3700, 4000 kn Injection unit (acc. to EUROMAP): 1300, 2100
ALLROUNDER 820 A Distance between tie bars: 820 x 820 mm Clamping force: 3, 4000 kn Injection unit (acc. to EUROMAP): 1300, 2100 MACHINE DIMENSIONS 820 A 875 567 707 1100 178 433 482 2355 625 2800 3) 7476
More informationALLROUNDER 170 S. Distance between tie bars: 170 x 170 mm Clamping force: 125, 150, 180 kn Injection unit (acc. to EUROMAP): 30, 70
ALLROUNDER 1 S Distance between tie bars: 1 x 1 mm Clamping force: 125, 150, 180 kn Injection unit (acc. to EUROMAP): 30, MACHINE DIMENSIONS 1 S 120 1130 850 min. max. 385 330 255 455 3) 1850 1880 385
More informationALLROUNDER 920 S. Distance between tie bars: 920 x 920 mm Clamping force: 5000 kn Injection unit (acc. to EUROMAP): 2100, 3200, 4600
ALLROUNDER 920 S Distance between tie bars: 920 x 920 mm Clamping force: 5000 kn Injection unit (acc. to EUROMAP): 2100, 3200, 4600 MACHINE DIMENSIONS 920 S 2425 4) 2530 5) 1670 4) 1697 5) 848 4) 878 5)
More informationALLROUNDER 275 V. Vertical free-space system Clamping force: 28 tons Injection unit: 1.4 oz, 2.3 oz
ALLROUNDER 275 V Vertical free-space system Clamping force: 28 tons Injection unit: 1.4 oz, 2.3 oz MACHINE DIMENSIONS 275 V 35.43 2.18 70.1 113.39 1) 119.1 2) 111.81 1) 115.95 2).57 75.1 31.5 35.43 min.35.43
More informationALLROUNDER 570 A. Distance between tie bars: x (570 x 570 mm) Clamping force: 220 tons Injection unit: 8.2 oz, 15.3 oz, 29.
ALLROUNDER 570 A Distance between tie bars: 22.44 x 22.44 (570 x 570 mm) Clamping force: 220 tons Injection unit: 8.2 oz, 15.3 oz, 29.8 oz MACHINE DIMENSIONS 570 A 78.82 55.43 33.46 330 17.24 88.39 1)
More informationALLROUNDER 520 E. Distance between tie bars: x (520 x 520 mm) Clamping force: 165 tons Injection unit: 6.1 oz, 8.2 oz, 15.
ALLROUNDER 520 E Distance between tie bars: 20.47 x 20.47 (520 x 520 mm) Clamping force: 165 tons Injection unit: 6.1 oz, 8.2 oz, 15.3 oz MACHINE DIMENSIONS 520 E 78.74 53.15 33.46 4.72 12.99 15.75 51.18
More informationALLROUNDER 470 E. Distance between tie bars: 18.5 x 18.5 (470 x 470 mm) Clamping force: 110 tons Injection unit: 3.7 oz, 6.1 oz, 8.
ALLROUNDER 470 E Distance between tie bars: 18.5 x 18.5 (470 x 470 mm) Clamping force: 110 tons Injection unit: 3.7 oz, 6.1 oz, 8.2 oz MACHINE DIMENSIONS 470 E 51.24 33.44 max.16.34 4.72 80.71 83.62 15.75
More informationALLROUNDER 1800 T. Table diameter: 1800 mm Clamping force: 2000, 2500, 3200 kn Injection unit (acc. to EUROMAP): 400, 800, 1300, 2100
LLROUNDER 1 T Table diameter: 1 mm Clamping force: 2000, 2500, 3200 kn (acc. to EUROMP): 400,, 1300, 2100 MCHINE DIMENSIONS UP TO 2000 KN 1 T NCG 1150 997 4165 1) 4145 1) 2457 2110 4625 2) 4525 2) 1600
More informationFacts and figures INTEGRALPICKER V.
Facts and figures INTEGRALPICKER V www.arburg.com INTEGRALPICKER V Technical data Stroke, X-axis F Stroke, Y axis Clamping surface fixed mould platen A H K D C B 135 G P Ejection chute B-axis M N L 2 Technical
More informationALLROUNDER 520 A. Tie bar distances: 520 x 520 mm Clamping forces: 1300, 1500 kn Injection units (according to EUROMAP): 400, 800.
A S GOLDEN EDITION V T K ALLROUNDER Technical data Tie bar distances: 520 x 520 mm Clamping forces: 1300, 1500 kn Injection units (according to EUROMAP):, 800 www.arburg.com Machine dimensions el. connection
More informationALLROUNDER 470 A multi-component
A S GOLDEN EDITION V T K ALLROUNDER 470 A multi-component Technical data Tie bar distances: 470 x 470 mm Clamping forces: 800, 1000 kn Injection units (according to EUROMAP): 70,, 400 www.arburg.com 470
More informationALLROUNDER 270 S Tie bar distance: 270 x 270 mm Clamping forces: 250, 350, 400 kn Injection units (according to EUROMAP): 70, 100, 170
A S GOLDEN EDITION V T ALLROUNDER Technical data Tie bar distance: 270 x 270 mm Clamping forces: 250, 350, 400 kn Injection units (according to EUROMAP): 70,, 170 www.arburg.com Machine dimensions 1850
More informationA S GOLDEN EDITION V T C ALLROUNDER 270/320 C. Technical Data
A S GOLDEN EDITION V T C ALLROUNDER 270/320 C Technical Data Tie bar distances: 270 x 270 mm, 320 x 320 mm Clamping forces: 0, 400, 0, 600 kn Injection units (according to EUROMAP):, 2 www.arburg.com 270/320
More informationFacts and figures MULTILIFT SELECT 6
Facts and figures MULTILIFT SELECT 6 www.arburg.com MULTILIFT SELECT 6 Technical data Stroke X-axis min. 100 Stroke Z-axis Clamping face, fixed mould platen 190 A D K Stroke Y axis 156 B 2) C 123 P G L
More informationFacts and figures MULTILIFT V 6
Facts and figures MULTILIFT V 6 www.arburg.com MULTILIFT V 6 Technical data F Stroke X-axis 3) Stroke Z-axis 1) Clamping face fixed mould platen E A K 4) Stroke Y axis 2) D 2) 156 B 4) C 2)4) 123 P 1)
More informationALLROUNDER 1200 T. Table diameter: 1200 mm Clamping force: 800, 1000, 1600, 2000 kn Injection unit (acc. to EUROMAP): 70, 100, 170, 290, 400, 800
Fcts nd figures ALLROUNDER 12 T Tble dimeter: 12 mm Clmping force: 8, 1, 16, 2 kn (cc. to EUROMAP): 7, 1, 17, 29, 4, 8 www.rburg.com 12 T Mchine dimensions up to 1 kn 385 1) 323 2) 3545 3) 366 4) 391 5)
More informationHydraulic ALLROUNDERs
Focus Hydraulic ALLROUNDERs Injection moulding machines for diverse applications www.arburg.com At a glance 1 2 2,5 Single-circuit pump technology Dual-circuit pump technology Hydraulic accumulator technology
More informationFocus. Electric ALLROUNDERs. Injection moulding machines for complex part production.
Focus Electric ALLROUNDERs Injection moulding machines for complex part production www.arburg.com At a glance [s] 1 2,5 2,0 1,5 1,0 0,5 ALLDRIVE EDRIVE / GOLDEN ELECTRIC Hydraulic 370 470 520 2 [mm] 120
More informationTechnical Data Concept and System 25/280
Technical Data Concept and System 25/ Demag Plastics Group Concept and System 25/ Model description 25/-35 25/-80 25/-120 International size description 250-35 250-80 250-120 Clamping unit 25/ Clamping
More informationTechnical Data Injection Moulding Machines Series CX PET Light
130 CX PET Light Technical Data Injection Moulding Machines Series CX PET Light CX KM 130-750 CX (PET) 4-fold Injection Moulding machine metric units KM130CX Clamp unit Clamping force kn 1300 Mould opening
More informationWORLD MOTOR VEHICLE PRODUCTION BY COUNTRY AND TYPE QUARTERS June 14, 2018
QUARTERS 2017-2018 June 14, 2018 CONTENTS BASEPROTOTAL BASEPROCARS BASEPROLCV BASEPROHCV BASEPROBC Summation of cars, LCVs, HCVs, heavy buses Cars LCVs HCVs Heavy buses Note: The production of cars and
More informationAUSTRIA. Table 1. FDI flows in the host economy, by geographical origin. (Millions of US dollars)
Table 1. FDI flows in the host economy, by geographical origin World 5 690 138 6 195 3 184 10 784 7 933 31 154 6 858 9 303 840 10 618 5 760 Developed economies 5 740 13 5 341 2 689 10 137 6 291 29 721
More informationRectangular photoelectric proximity switches
Rectangular photoelectric proximity switches Features Diffuse sensors with operating distance of 300 mm or 800 mm Through-beam sensors with operating distance of 15 or 50 m Reflex sensors with operating
More informationGlobal Dialysis - Cost per Dialysis Session
Cost per session for dialysis where a cost has been entered for a dialysis centre. All costs have been converted to US Dollars as at 19 May 2006. Note that the costs do not state what is covered by a dialysis
More informationBP Statistical Review of World Energy June 2017
BP Statistical Review of World Energy June 217 Primary energy 8 Consumption 8 Consumption by fuel 9 66 th edition Primary energy Consumption* Growth rate per annum Million tonnes oil equivalent 26 27 28
More information2. The quantifiable attributes
. Introduction Buying a plastic injection moulding machine (PIMM) is not a small investment. Too much machine for the job at hand is wasteful; too little machine does not get the job done. Careful matching
More informationSpritzgiessautomaten. Innovative into the future. Data and Equipment
Spritzgiessautomaten Innovative into the future Data and Equipment Compact range BOY has become the specialist in the manufacturing of injection moulding machines with clamping forces up to 1,000 kn. BOY
More informationMacroPower MC t The flexible large-molding machine. world of innovation
400 2000 t The flexible large-molding machine world of innovation MacroPower MULTI-COMPONENT SERIES Extra functionality and more freedom for design COMBIMOULD is the multi-component technology from WITTMANN
More informationDIAPHRAGM PRESSURE CYLINDERS
DIAPHRAGM PRESSURE CYLINDERS Diaphragm pressure cylinders EFFBE diaphragm pressure cylinders: sensitive and robust By using EFFBE diaphragm pressure cylinders, sensitive control pro - cesses can be realised
More informationFork through-beam sensors
Fork throughbeam sensors Features Wide range of sizes: fork widths from 2 to 220 mm Metal housings Integrated evaluation unit Connection by means of S8 connector Degree of protection Adjustable sensitivity
More informationDOUBLE OCTOMILL TM PRODUCT RANGE
DOUBLE OCTOMILL TM PRODUCT RANGE Double Octomill insert selection and cutting data recommendations, see page 6. complete insert programme, see page 7. Tool angles: Jo = -11q Jp = - 8q Jf = - 8q Pitch
More informationFork through-beam sensors
Fork throughbeam sensors Features Wide range of sizes: fork widths from 2 to 220 mm Metal housings Integrated evaluation unit Connection by means of S8 connector Degree of protection Adjustable sensitivity
More informationWÜRTH Industrie Service WÜPLAST. Screws for thermoplastics
WÜRTH Industrie Service WÜPLAST Screws for thermoplastics W-KLT - SICHER, FLEXIBEL Table of contents: page Introduction 2 WÜPLAST 3 Thread geometry 4 Design and installation information 5-6 WÜPLAST product
More informationPrimary energy. 8 Consumption 9 Consumption by fuel. 67 th edition
Primary energy 8 Consumption 9 Consumption by fuel 67 th edition Primary energy Consumption* Growth rate per annum Million tonnes oil equivalent 27 28 29 2 211 212 213 214 215 216 217 217 26-16 Share 217
More informationLifting Instructions for 1336 PLUS and FORCE D Frame Drives
Installation Instructions Lifting Instructions for 1336 PLUS and FORCE D Frame Drives This publication will guide you through the steps needed to properly lift and mount the following drives: 1336 PLUS
More informationInfographics on Electromobility (January 2019)
Infographics on Electromobility (January 2019) Publisher: BMW Group Corporate Communications Electromobility Last Update: 04.01.2019 Contact: presse@bmw.de ELECTROMOBILITY IN GERMANY. SHARE IN NEW REGISTRATIONS
More informationMade UNDER high pressure
Made UNDER high pressure Made FOR high pressure THE CONTRINEX HIGH-PRESSURE-RESISTANT INDUCTIVE SENSOR SERIES Contrinex is a leading international high-tech sensor company with headquarters in Switzerland.
More informationWÜRTH Industrie Service DE EN WÜPLAST. Screws for thermoplastics
WÜRTH Industrie Service DE EN WÜPLAST Screws for thermoplastics W-KLT - SICHER, FLEXIBEL Table of contents Page Introduction 2 WÜPLAST 3 Thread geometry 4 Design and installation information 5-6 WÜPLAST
More informationNI PS-15/16/17 Side Mount Brackets
INSTALLATION GUIDE NI PS-15/16/17 Side Mount Brackets This document provides the installation procedure for the NI PS-15/16/17 Side Mount Brackets. This accessory is used to mount NI PS-15/16/17 power
More informationGlobal Polybutadiene Rubber (BR) Market Study ( )
Global Polybutadiene Rubber (BR) Market Study (2014 2025) Table of Contents 1. INTRODUCTION 1.1. Introduction to Polybutadiene Rubber Market Product Description Properties Industry Structure Value Chain
More informationAnnex IV. True nationality of the 20 largest fleets by flag of registration, as at 1 January 2011 a
194 Annex IV. True nationality of the 20 largest fleets by flag of registration, as at 1 January 2011 a Antigua and Barbuda Bahamas China Belgium 0 0-9 122 0.2 1 59 0.1 Bermuda 0 0-17 1 907 2.8 0 0 - Brazil
More informationM O T O R V E H I C L E S T A T I S T l C S
M O T O R V E H I C L E S T A T I S T l C S of Japan 2017 JAPAN AUTOMOBILE MANUFACTURERS ASSOCIATlON, INC. C O N T E N T S Motor Vehicles in Use Cars, Trucks, Buses and Special Purpose Vehicles, 1945-2016
More informationSM Series. High Pressure - All-Metal Flowmeter and Switch
High Pressure - All-Metal Flowmeter and Switch measuring monitoring analyzing SM Series Accuracy: ± 5% Full Scale Max. Pressure: 3600 / 5000 PSI or Versions Direct Reading Scales for Water or Air Small,
More informationPacking Data Installation Instructions
Packing Data PK Installation Instructions This document describes how to install a Dataliner DL10 display in a panel or enclosure and connect power. European Union Directive Compliance wiring and safety
More informationtesting to perfection MultiTest-i Technical Datasheet
testing to perfection MultiTest-i Technical Datasheet MultiTest 0.5-i, 1-i & 2.5-i 0.5 kn 1 kn 2.5 kn Height Width Depth Vertical Daylight* MultiTest 0.5-i 1710 mm (67.3) 290 mm (11.4) 414 mm (16.3) 1359
More informationExtraction arms for every type of application
1 Extraction arms for every type of application 2 Improved workspaces within arm s reach A workspace free from dust, hazardous particles, fumes and exhaust is good in many ways. It improves the working
More informationtesting to perfection MultiTest-i Technical Datasheet
testing to perfection MultiTest-i Technical Datasheet MultiTest 0.5-i, 1-i & 2.5-i 0.5kN 1kN 2.5kN Height Width Depth Vertical Daylight* MultiTest 0.5-i 1710mm (67.3) 290mm (11.4) 414mm (16.3) 1359mm (53.5)
More informationPerformance Derby: MSCI Regions/Countries Earnings & Revenues Growth 2019E / 2018E / 2017A
Performance Derby: MSCI Regions/Countries Earnings & Revenues Growth 2019E / 2018E / 2017A February 28, 2018 Dr. Ed Yardeni 516-972-7683 eyardeni@yardeni.com Joe Abbott 732-497-5306 jabbott@yardeni.com
More informationNCP/NCB/NCS. Magnetic Float Switches. for Liquids
Magnetic Float Switches for Liquids measuring monitoring analyzing NCP/NCB/NCS Available Materials: Brass, SS, NBR, Polypropylene, and PVC Maximum Pressure: 400 PSIG Maximum Temperature: 300 F Single Point
More informationNo.1. Side approach mechanism Precise lateral contacting. Catalogue 1.1. Test Probes Test Fixtures
No.1 in testing solutions in der Prüftechnik Test Probes Test Fixtures Side approach Precise lateral contacting Catalogue 1.1 16 mm, 1 N contact force INGUN for precise lateral contacting -controlled operated
More informationChit Chats clients save up to 70% on U.S. and international postage.
ONTARIO RATE CARD 2018 Prices are valid from January 21, 2018 Chit Chats clients save up to 70% on U.S. and international postage. Ship your package to the U.S. as if you were in the U.S. Packages under
More informationThe new STx chain hoist NEW. Sophisticated technology prepared for the future
The new STx chain hoist 03.2018 NEW Sophisticated technology prepared for the future The new STx chain hoist Sophisticated technology prepared for the future Our experts have undertaken to keep reviewing
More informationMMA. Insertion Resistance Thermometers. with, or without transmitter. OEconomically-priced O thermometers with optional plug-on display
Insertion Resistance Thermometers with, or without measuring monitoring analysing MMA OEconomically-priced O digital thermometers with optional plug-on display O O Compact construction with or without
More informationGlobal Valuation Summary - SAMPLE PAGES
- SAMPLE PAGES Regional Valuation Comparisons... 2... 4... 7... 9... 11 Developed Asia Pacific ex... 13 Developed Europe ex... 16 Advanced Emerging... 19 Appendix... 22 Disclaimer... 23 Global Market Valuations
More informationCrimpTest-1 kn. Calibration Bracket
CrimpTest-1 kn Calibration Bracket 431-471-02 May 2017 CrimpTest-1 kn Calibration Bracket Manual This manual describes the operation of the calibration test rig part no. 432-671, for the purpose of checking
More informationSelection Guide for P Series Pump Accessories & Options
Selection Guide for P Series Pump Accessories & Options Contents Page Calibration Cylinders...2 Back Pressure & Pressure Relief Valves...3 Pulsation Dampeners...6 Motors & Controllers...9 Calibration Cylinders
More informationTest Probes Test Fixtures INGUN. Test Fixtures for low PCB volumes. Change made easy
Test Probes Test Fixtures INGUN Test Fixtures Change made easy MA 350/F with customized ATS MA350 force up to 300 N up to 160 x 100 mm MA 3xx-series generous and free accessibility MA 360/F with customized
More informationTotal credit to the non-financial sector (core debt), % of GDP Table F1.1
Total credit to the non-financial sector (core debt), % of GDP Table F1.1 2012 2013 2014 2015 2016 Q2 16 Q3 16 Q4 16 Q1 17 Q2 17 Argentina 62.6 66.4 64.6 75.5 75.3 81.7 80.1 75.3 71.6 72.7 Australia 208.0
More information1. INTERNATIONAL OVERVIEW. 1.0 Area and population. population (1,000) area
1.0 Area and population area population (1,000) km 2 2000 2010 2018 1 inhabitants per km 2 Belgium 30,530 10,251 10,920 11,443 375 Germany 357,380 82,212 81,777 82,952 232 Estonia 45,230 1,397 1,331 1,315
More informationFEDERAL RESERVE statistical release
FEDERAL RESERVE statistical release FOR IMMEDIATE RELEASE MARCH 16, 1992 E.U C1Z1, GEOGRAPHICAL r DISTRIBUTION n OF e ASSETS AND^LIABILITIES (IN MILLIONS OF DOLLARS) ASSETS COUNTRY OF CUSTOMER 12/31/90
More information45mm. Electric Specifications Input Power Source 230 VAC +/- 10% 3Ph 60Hz Std. Power. Machine kva 35 Supply
330 S P E C I F I C A T I O N S 45mm English Metric Injection Unit Specifications A' A B A' A B Inj. Capacity, Max. GPPS oz 8 11 13 gm 226 312 368 Theoretical Disp in^3 15.3 19.4 24.0 cm^3 251 318 393
More informationPortable Compressors MOBILAIR M 122 With the world-renowned SIGMA PROFILE Free air delivery 11.1 m³/min
www.kaeser.com Portable Compressors MOBILAIR M 122 With the world-renowned SIGMA PROFILE Free air delivery 11.1 m³/min Worldwide sales and service network KAESER is one of the world s foremost compressor
More informationOUR HEADQUARTERS. The only name that matters for injection and compression moulding machines. UK Slovakia Taiwan RUBBER INJECTION MACHINE SERIES
RUBBER INJECTION MACHINE SERIES OUR HEADQUARTERS UK Slovakia Taiwan The only name that matters for injection and compression moulding machines www.panstone.eu www.panstone.eu Tel: +44 (0) 978 476 Email:
More informationMulti Function Efficient Dynamic Altitude Simulation MEDAS
Multi Function Efficient Dynamic Altitude Simulation MEDAS BENEFITS A wide simulation range and extreme flexibility SIMULATE POSITIVE & NEGATIVE PRESSURE One system for positive & negative pressure Steady
More informationPotential Danger of Fire or Explosion Read this letter now!
Elster GmbH Postfach 28 09 49018 Osnabrück Strotheweg 1 49504 Lotte (Büren) Deutschland Tel. +49 541 1214-0 Fax +49 541 1214-370 hts.lotte@honeywell.com ThermalSolutions.honeywell.com Potential Danger
More informationHydraulic Power Units 108 Series
Hydraulic Power Units 18 Series Catalogue HY17-131/UK March 3 Catalogue HY17-131/UK Content 18 Series Content Page 18 Series hydraulic power units... 3 Typical applications... 3 Ordering code... 4 Information
More informationD6.. Butterfly valves. For controlled operation.
D6.. Butterfly valves. For controlled operation. Water is our element. www.belimo.eu Total solutions for medium and large volumetric flows. Butterfly valves from Belimo are available as classical D6..N
More informationTechnical Specifications
All-Electric 55 Frame 21/24/29/34 oz Injection Unit Specifications A B C A B C Injection Capacity, Max GPPS* oz 21 29 34 gm 595 822 963 Theoretical Disp in^3 37.7 52.6 61.1 cm^3 618 862 1,001 Max Pressure
More information67 th edition. Renewable energy. Appendices. 44 Other renewables consumption 45 Biofuels production
Renewable energy 44 Other renewables consumption 45 Biofuels production Appendices A1 Solar Generation A2 Wind Generation A3 Geothermal, biomass and other Generation A4 Geothermal Cumulative installed
More informationProduction of minor oil products from refineries - by type Thousand metric tons
Production of minor oil from refineries - by type Table 23 Table Notes Data refer to production from refineries of refinery, ethane, naphtha, lubricants, bitumen, paraffin, petroleum, white spirit, and
More informationImports of seed for sowing by country Calendar year 2011 Source: ISF compilation based on official statistics and international seed trade reports
USA 157,432 15,562 464 173,458 523 318 67 908 Germany 195,159 5,913 520 201,592 595 97 22 714 France 125,701 4,389 277 130,367 522 150 11 683 Netherlands 140,899 12,253 796 153,948 250 330 48 628 Italy
More information