SUPREME. Catalogue 2016/18 NEW. Fasteners and Components EXPANDED MATERIAL RANGE BLACK MOULDED SHOULDER WASHERS
|
|
|
- Daniel Perry
- 5 years ago
- Views:
Transcription
1 NEW BLACK MOULDED SHOULDER WASHERS SUPREME Fasteners and Components Australia s Leading Supplier of High Quality Plastic Fasteners and Components Catalogue 2016/18 EXPANDED MATERIAL RANGE Natural Nylon Black Nylon GF Nylon TPR Neoprene PVDF Polypropylene PVC PTFE Peek Polycarbonate
2 WHEN YOUR APPLICATIONS REQUIRE THE FOLLOWING High Dielectric Strength Low Conductivity of Heat or Cold Chemical Resistance Extreme Operating Temperatures Non Flammability LightWeight Dimensional Stability Corrosion Resistance Isolation with other Materials Weather Resistance Low Coefficient of Friction Non Magnetic with High Volume Resistance Sealant Properties SUPREME Fasteners and Components can HELP! Our worldwide engineering teams can offer customer assistance in the areas of material selection and design for both our STANDARD and CUSTOM Parts. Washers, Spacers Standard Screws Threaded Rods Protecting Caps, Cover Caps Nuts Assembly Systems SUPREME Fasteners and Components have been involved in the manufacture of moulded and precision machined plastic items for more than 45 years. Through our worldwide resources of having access to manufacturing plants in Australia, the USA and Europe we are able to offer our customers the most comprehensive range of plastic fasteners and components possible. This catalogue details our Main Products range.
3 CHEESE HEAD SCREWS... 2 COUNTERSUNK HEAD SCREWS... 3 HEXAGONAL HEAD SET SCREWS... 4 HEXAGONAL HEAD BOLTS... 5 SLOTTED GRUB SCREWS AND HEX SOCKET GRUB SCREWS... 5 HEX NUTS (NYLON), WING NUTS, DOME NUTS AND WASHER FACED NUTS ROUND HEAD KNOBS... 7 PROTECTING CAPS... 7 SHOULDER/INSULATING (TOP HAT) WASHERS FLAT WASHERS SPACERS...12 ANTILOSS / RETAINING WASHERS...13 DOUBLE RETAINING WASHERS DUBO...13 THREADED ROD...14 HEX HEAD SCREWS & NUTS SPECIAL MATERIALS MATERIAL SPECIFICATIONS AND CHEMICAL RESISTANCE... 16IBC NOTE: Unless otherwise indicated most items in this Catalogue are moulded from PA 6 or PA 6.6 (Nylon). Page 1
4 CHEESE HEAD SCREWS SUPREME FASTENERS & COMPONENTS PH: (02) FAX: (02) M2 M2.5 M3 4MM 5MM 4MM 5MM 70MM 5MM 45MM 75MM 5MM 5MM 45MM 70MM 70MM CHEESE HEAD SCREWS METRIC DIN 84 M10 75MM 85MM 95MM MM MM 80MM 90MM MM M12 70MM 3/16 1/4 3/8 1/2 5/8 3/ /4 1 1/2 2 1/2 5/8 3/ /2 2 SCREWS MARKED NOT FULLY THREADED. M3 BLACK NYLON 16M M10 BLACK NYLON VERSUS BLACKENED NYLON Dyeing individual items (mainly in Black) has always been available as a cosmetic alternative to Natural Nylon. Suitable for many applications, Blackened Nylon, however, has limited outdoor use as the dye can often wash out. Moulding in Black Nylon is the best way to get increased outdoor performance and in this catalogue only items made this way are shown in each section under the heading BLACK NYLON. All Natural Moulded items are able to be dyed and we will continue to offer this service, should you require it. OTHER HEAD STYLES AVAILABLE ON REQUEST INCLUDE; IMPERIAL BINDER SLOT, HEX SLOT, PAN SLOT, SET SLOT, SOCKET SET, PAN PHILLIPS, HEX SOCKET CAPS. METRIC PAN SLOT, PAN PHILLIPS, FILLISTER SLOT, PHILLIPS COUNTERSUNK, ROUND HEAD AND WING SCREWS. SPECIAL ORDERS: MINIMUM ORDER LEVELS APPLY Page 2
5 SUPREME FASTENERS & COMPONENTS PH: (02) FAX: (02) M2 M2.5 M3 4MM 15MM 4MM 15MM 4MM 15MM 5MM 65MM 45MM 55MM 65MM 85MM 5MM 5MM 5MM 15MM 65MM 45MM 55MM 75MM 75MM COUNTERSUNK HEAD SCREWS METRIC DIN 963 M10 M12 75MM 65MM 45MM 55MM 65MM 85MM 45MM 55MM 85MM 3/16 1/4 1/2 3/4 1 1/2 5/8 3/ /2 1 3/ /2 M3 BLACK NYLON 9MM SPECIAL ORDERS: MINIMUM ORDER LEVELS APPLY COUNTERSUNK HEADS SCREWS Page 3
6 HEXAGONAL HEAD SET SCREWS AND HEXAGONAL SOCKET HEAD SCREWS SUPREME FASTENERS & COMPONENTS PH: (02) FAX: (02) M2 M2.5 5MM M3 5MM 5MM 45MM 70MM 45MM 70MM 75MM 80MM 45MM 70MM 75MM 80MM MM M10 45MM 70MM 75MM 80MM MM HEXAGONAL HEAD SET SCREWS METRIC DIN 933 M12 45MM 50 70MM 75MM 80MM MM 45MM M16 55MM 50 65MM 70MM 75MM 80MM MM 45MM M20 55MM 50 65MM 70MM 75MM 80MM MM 45MM M24 55MM 50 65MM 70MM 75MM 80MM MM 1/2 3/4 1/ /2 3 5/16 3/8 1/2 3/4 1 1/2 3/4 1 2 SPECIAL ORDERS: MINIMUM ORDER LEVELS APPLY Page 4 1/2 UNC 3/4 1 BLACK NYLON M3 M10 M12 HEXAGONAL SOCKET HEAD SCREWS METRIC DIN 931 M10 M12 45MM UP TO 1 45MM UP TO 1 45MM UP TO 1 ALSO AVAILABLE ON REQUEST M3,,, AND M16 (MINIMUM ORDER LEVELS APPLY).
7 SUPREME FASTENERS & COMPONENTS PH: (02) FAX: (02) HEXAGONAL HEAD BOLTS METRIC DIN 931 M10 M12 M16 M20 MM 80MM 105MM MM MM 105MM MM MM MM MM MM 105MM MM M24 105MM 1 ATTENTION: THREAD LENGTH IN METRIC MAY VARY ACCORDING TO BOLT LENGTH 1/4 5/16 3/8 1/2 UNC 1 1/4 1 1/ / / /4 1 1/ / / /4 1 1/ / / / / / / /2 5 M10 SLOTTED GRUB SCREWS AND HEX SOCKET GRUB SCREWS Page 5 SPECIAL ORDERS: MINIMUM ORDER LEVELS APPLY METRIC DIN 551 / DIN 913 M12 M16 M20 M24 45MM OTHER SIZES AVAILABLE SUBJECT TO MINIMUM ORDER LEVELS. HEXAGONAL HEAD BOLTS SLOTTED GRUB SCREWS & HEX SOCKET GRUB SCREWS
8 HEX NUTS (NYLON), WING NUTS, DOME NUTS AND WASHER FACED NUTS SUPREME FASTENERS & COMPONENTS PH: (02) FAX: (02) Size H A/F Pack 3/ /16 L / / / /2 UNC /8 UNC /4 UNC UNC HEXAGONAL NUTS METRIC DIN 934 (Millimetres) Size H A/F Pack M M M M M M M M M M M M L=INDICATES LARGER SIZE EXPLANATION H = HEIGHT A/F = ACROSS THE FLATS A LIMITED RANGE OF METRIC HEX JAM NUTS ALSO CAN BE SUPPLIED. Size H A/F Pack M M M WING NUTS Size A B C D Pack M M Size A B C D Pack 1/ / / /2 UNC BLACK NYLON DOME NUTS METRIC DIN 1587 Size A B Pack M M M M M M Size A B Pack 3/16 UNC /4 UNC /16 UNC /8 UNC /2 UNC /8 UNC Page 6
9 SUPREME FASTENERS & COMPONENTS PH: (02) FAX: (02) DOME NUTS METRIC DIN 1587 BLACK NYLON Size A B Pack M M M WASHER FACED NUTS Size A B C Pack M M M M M M POLYETHYLENE Size A B Pack 7.0MM 8.5MM 8.0MM 10.5MM 10.0MM MM 15.5MM M MM 19.0MM M MM 20.5MM M MM 23. M MM 26.5MM M MM 30.0MM M MM 31.5MM M MM 39.0MM AVAILABLE IN BLACK OR RED ACETAL Screw M3 (S) (L) UP TO 4 A= ACROSS THE FLATS INTERNAL B= HEIGHT PROTECTING CAPS FIT SNUGLY ONTO HEX HEAD FASTENERS. JUST PRESS IT ON FOR A SAFE, CONCEALED BOLT OR NUT. PROTECTING CAPS ROUND HEAD KNOBS Pack POLYETHYLENE Size A B Pack # / / / STANDARD COLOURS BLACK, WHITE, GREY OR BROWN PRESS ONTO ANY STANDARD HEXAGONAL SOCKET HEAD ROUND HEAD KNOBS ARE DESIGNED TO ASSIST HAND TIGHTENING AND REMOVAL ROUND HEAD KNOB HEX SOCKET SCREW THIN SHEET OF MATERIAL TO PREVENT MARRING OF NYLON SURFACE ROUND HEAD KNOBS PROTECTING CAPS Page 7
10 SHOULDER/INSULATING (TOP HAT) WASHERS SUPREME FASTENERS & COMPONENTS PH: (02) FAX: (02) Size ID OD Length Head Dia. SHOULDER/INSULATING (TOP HAT) WASHERS Thick Pack Size ID OD Length Head Dia. M10 M12 Thick Pack SCREWS INSULATORS / SHOULDER (TOP HAT) WASHERS HAVE FIVE (5) MEASUREMENTS THAT NEED TO BE INCLUDED WHEN YOU ARE ORDERING: ID = INNER DIAMETER, SCREW / BOLT SIZE (d) OD = OUTER DIAMETER, SIZE OF INSERT HOLE (d1) LENGTH = DEPTH REQUIRED/ LENGTH UNDER WASHER (L) HEAD = WIDTH OF OUTER FLANGE (D) THICK = THICKNESS OF FLANGE (h) h D d d1 OTHER SIZES INCLUDING IMPERIAL DIMENSIONS ARE ALSO AVAILABLE. L Page 8
11 SUPREME FASTENERS & COMPONENTS PH: (02) FAX: (02) Size ID OD Length Head Dia. M16 M20 SHOULDER/INSULATING (TOP HAT) WASHERS Thick Size ID OD Length Head Dia. M10 Thick Pack Pack Size ID OD Length Head Dia. M24 BLACK NYLON Thick Pack M M M M Size ID OD Length Head Dia. M12 M16 M20 M24 SOME SIZES ALSO AVAILABLE IN ACETAL, POLYPROPYLENE AND GLASS FILLED NYLON Subject to Minimum Order Levels Thick Pack M SHOULDER/INSULATING (TOP HAT) WASHERS Page 9
12 FLAT WASHERS SUPREME FASTENERS & COMPONENTS PH: (02) FAX: (02) M M M M M M M FLAT WASHERS M M M M M M M M M M / / / / / / / / / BLACK NYLON M M M M M M BLACK TPR M M M M M BLACKENED ALL PRODUCTS CAN BE DYED BLACK FOR COSMETIC APPEARANCES ONLY 30% GLASS FILLED NYLON M M M ITEMS MARKED IN BOLD ON THIS PAGE ARE STOCK ITEMS, ALL OTHERS ARE SUBJECT TO MINIMUM ORDER REQUIREMENTS. Page 10
13 SUPREME FASTENERS & COMPONENTS PH: (02) FAX: (02) P.V.D.F FLAT WASHERS HARD P.V.C. PEEK (BROWN) FLAT WASHERS M M M M M M M M M M M M M POLYCARBONATE (CLEAR) POLYPROPYLENE M M M M M P.V.C. (GREY) NEOPRENE (BLACK) M M M M M P.T.F.E. (TEFLON) M FIBRE (ORANGE/RED) M M M M M M M M WE CAN PROVIDE A RANGE OF OTHER SIZES AND MATERIALS, THESE INCLUDE: EPDM BUTYL GU PERB NEO HD & LD POLYETHYLENE ALL ORDERS SUBJECT TO MINIMUM ORDER LEVELS. M M M Page 11
14 SPACERS SUPREME FASTENERS & COMPONENTS PH: (02) FAX: (02) SPACERS HEAT STABILISZED BLACK NYLON ID OD # Pack B 8.0 B B 8.0 B B 12.0 B D 10.0 B 12.0 D 14.0 D B 20.0 B 24.0 B 28.0 B 10.0 C 12.5 B B 18.0 B 20.0 B D 15.0 B B 20.0 B 25.0 B 15.0 B B 30.0 B B 20.0 B B 28.0 B C # POSSIBLE LENGTHS A B C D 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50 Dia. OD Length Pack IMPERIAL SIZES ALSO AVAILABLE. Dia. OD Length Pack Page 12
15 SUPREME FASTENERS & COMPONENTS PH: (02) FAX: (02) ANTILOSS / RETAINING WASHERS M M DOUBLE RETAINING WASHERS DUBO EQUIVALENT Size Imperial Eqivalent ID (A) OD (B) Th. (C) Pack M 3 1/ M 4 5/ M 5 3/ M 6 1/ M 8 5/ M 10 3/ M 12 7/ M 14 x M 16 5/ M 18 11/ M 20 3/ M22 UP TO 2 ALSO AVAILABLE ON REQUEST, MINIMUM ORDER NUMBERS APPLY. ADVANTAGES When using The Dubo washer are; Locks nuts, Bites into thread, Gives % sealing of penetration hole, Centers the fastener, Absorbs vibration, Suppresses noise, Reduces dynamic load on fasteners, Enables separation of different metals, Prevents moisture penetration, Protects against electrolytic corrosion, Offers nonproblematic assembly. APPLICATIONS The Dubo washer is suitable for a wide variety of uses. These include; Automation Industry, Automotive Industry, Construction Industry, Electrical Manufacturing, Electronic Equipment, Food Production, Furniture Manufacturing, Hydraulic Industry, Marine Industry, Mining Equipment, Power Tool Assembly, Telecommunication Industry, Thermal Insulation. ANTILOSS / RETAINING WASHERS DOUBLE RETAINING WASHERS Page 13
16 THREADED ROD SUPREME FASTENERS & COMPONENTS PH: (02) FAX: (02) METRIC D (MM) Pitch L (MM) M M M M M M M M M D (inches) Thread L (inches) 1/4 BSW 39.5 UNC 24 5/16 BSW 39.5 UNC 24 3/8 BSW 39.5 UNC 24 1/2 BSW 39.5 UNC 24 5/8 BSW 39.5 UNC 24 3/4 BSW 39.5 UNC 24 1 BSW 39.5 UNC 24 THREADED ROD METRIC BLACK NYLON D (MM) Pitch L (MM) M M M M M METRIC POLYPROPYLENE D (MM) Pitch L (MM) M M M M M OTHER MATERIALS AVAILABLE: POM (ACETAL) PTFE PVC IN GREY OR RED ALSO AVAILABLE: BLACK NYLON MINIMUM ORDER LEVELS APPLY MUSHROOM HEAD SCREWS SPECIAL MATERIALS METRIC POLYCARBONATE OTHER SIZES M2, M3, ON REQUEST. VERSATILE THREADED ROD STOCK IS EASILY CUT TO SIZE, RESISTANT TO MOST CHEMICALS, ELECTRICALLY INSULATING, NONMAGNETIC, LIGHTWEIGHT, HAS LOW THERMAL CONDUCTIVITY, AND IS VIBRATION AND ABRASION RESISTANT. STOCK LENGTHS ARE 1 METER (METRIC) OR 39.5 INCHES & 24 INCHES (IMPERIAL). POLYCARBONATE SCREWS Polycarbonate Screws are also available in a wide range of Head Styles including Countersunk both Cross Recessed and Slot, Hex Head, Hex Slot and Hexagonal Socket Head. (Minimum Purchase Quantities apply) Page 14
17 SUPREME FASTENERS & COMPONENTS PH: (02) FAX: (02) POLYPROPYLENE HEXAGONAL NUTS SPECIAL MATERIALS POLYPROPYLENE PEEK Size H A/F Pack M M HEXAGONAL HEAD SET SCREWS SPECIAL MATERIALS M10 M12 POLYPROPYLENE SCREWS ALSO AVAILABLE IN CHEESE HEAD. Size H A/F Pack M M M METRIC DIN 934 METRIC DIN 933 P.D.V.F. M10 P.D.V.F. PTFE (TEFLON) Size H A/F Pack M M M M M12 Size H A/F Pack M M M PEEK PTFE (TEFLON) M10 M12 M10 SPECIAL ORDERS: MINIMUM ORDER LEVELS APPLY M12 70MM SPECIAL ORDERS: MINIMUM ORDER LEVELS APPLY PEEK SCREWS PEEK Screws are also available in other Head Styles including Cross Recessed Pan, Hex Socket Grub and Cross Recessed Countersunk. (Sizes range from M2 to M12) Minimum Purchase Quantities apply. HEXAGONAL HEAD SET SCREWS AND NUTS SPECIAL MATERIALS Page 15
18 WE WORK WITH OVER 200 HIGH PERFORMANCE PLASTIC MATERIALS... THE MAJOR ONES BEING PA 6.6 (Nylon) Our standard polymer. The best tradeoff against cost for mechanical, temperature and ageing resistance. Supplied in a Natural Colour (which may vary slightly according to material used) most items are available in black by dyeing the original item after manufacture. PA 6.6 (Black Nylon) All the enhancements of Natural PA 6.6 but with increased outdoor stability and weatherability. 30% GF Nylon (Glass Filled) Compared with virgin PA 66 this 30% glass fibre reinforced nylon grade offers increased strength, stiffness, creep resistance and dimensional stability whilst retaining an excellent wear resistance. It also allows higher maximum service temperatures. TPR (Thermoplastic Rubber) Excellent UV resistance especially in high ozone areas. Extremely pliable without deforming its shape. PP (Polypropylene) and PE (Polethylene) For good chemical resistance and pliability. Complies with Food standards. Both materials are available in a wide range of densities. PC (Polycarbonate) Highest impact strength over a wide range of temperatures. The best product when transparency is required. PTFE (Teflon) High chemical resistance and good resistance to weathering. Known for its slipperiness. PEEK Heat resistance (up to 180 degrees Celsius) and impenetrable to most chemicals. A high strength alternative to most polymers. PVDF (Polyvinylidene Fluoride) Combines excellent cold and hot mechanical strength with universal chemical resistance. POM (Acetal) Acetal products are characterised by their strength, stiffness and hardness and are stable over a wide range of temperatures, humidity, environments and stress.high load bearing characteristics absorbs little moisture. TABLE OF RESISTANCE TO LIQUIDS Material Cold Water Hot Water Diluted acid Concentrated acid Oxidized acid Hydrofluoric acids Diluted potassium Concentrated potassium Inorganic bases Dry halogen Hydrocarbons Hydrocarbons (chlorinated) Alcohols Ester Cetone Ether Aldehyde Amino acids Organic acids Aromatic hydrocarbons Petrol Mineral oils Greases and oils Hydrocarbons (nonsaturated chlorinates) Oil of turpentine Humidity absorption % to ASTM D 570 PA to 1.9 PE HD < 0.01 PE LD < 0.01 PP 0.01 to 0.03 PVC U 0.04 to 0.4 PVC P 0.15 to 0.75 PC 0.1 to 0.2 PTFE 0 POM 0.22 to 0.25 TPR 0.1 to 0.3 PEEK 0.1 PVDF 0.03 Good resistance Limited resistance Not resistant Note: The above information is given according to the raw materials manufacturer s data. Page 16
19 MATERIAL PROPERTIES PHYSICAL PROPERTIES Density (RH 0) IS01183/ASTM D792 / DIN53479 Moisture Absorption ISO62/ASTM D570/DIN53495 (cold water 24 hrs at 23ºC) (RH 0) MECHANICAL PROPERTIES TENSILE STRENGTH Stress IS0527/ASTM D638/DIN53455 Elongation IS0527/ASTM D638/DIN53455 Modulus of elasticity IS0527/ASTM D638/DIN53457 UNITS PA 66 TPR PP PVDF PEEK HDPE PC PTFE g/cm3 % MPa % MPa BENDING STRENGTH Stress IS0178/ASTM D790/DIN53452 Modulus IS0178/ASTM D790/DIN53457 COMPRESSION Stress IS0604/ASTM D695/DIN53454 Modulus IS0604/ASTM D695/DIN53457 Charpy test unnotched ISO179/DIN53453 Charpy test notched IS0179/ASTM D256B/DIN53453 IZOD test unnotched ISO180/D256E IZOD test notched ISO180/D256A Rockwell hardness A ISO2392/ASTM D785A SHORE hardness D IS0868/ASTM D2240/DIN53505 THERMAL PROPERTIES Heat distortion under load (RH 0) Method A 1.85 MPa ISO75/ASTM D648/DIN53461 Method B 0/45 MPa ISO75/ASTM D648/DIN53461 Vicat softening point Method A 1 dan ISO306/ASTM D1525 Method B 5 dan ISO306/ASTM D1525 Melting point ISO1218/ASTM D2117/DIN53736 Service temperature: NORMAL PEAK Flammability rating (RH 0) UL94 ELECTRICAL PROPERTIES Resistance Transversal ISO CEI 93/ASTM D257/DIN53482 Surface ISO CEI 93/ASTM D257/DIN53482 Dielectric strength ISO CEI 243/ASTM D149/DIN53481 Other polymers and their properties: MPa MPa MPa MPa kj/m 2 kj/m 2 kj/m 2 kj/m 2 ºC ºC ºC ºC ºC ºC ºC 0hm.cm 0hm kv/mm The use of specific formulations with their different physical, mechanical, thermal, electrical and other properties can enhance the properties sought. The above information, which has the benefit of our current knowledge, is given solely by way of guidance in your choice of material and to indicate possible applications. The manufacturers of the following raw materials have indicated their properties. We cannot give any absolute guarantee for the properties for a specific usage. An appropriate feasibility study may be deemed necessary. RH 0 Humidity 0% V0 SELF EXTINGUISHING Other measures = Humidity 50% V2 = FLAMMABILITY DIFFICULT V1 NONFLAMMABLE HB = SLOW BURNING No break No break 8 12 R R to V Polyamide 66 Currently offers the best value for money in terms of reliability. Excellent mechanical properties: tensile strength, fatigue, impact strength, friction and abrasion resistance. Very good solvent resistance: oil, lubricants, petrol, benzol, acetone, trichlorethylene, white spirit. Resists most diluted acids. Combustion difficult to self extinguishing No break to 135 HB TPR Thermoplastic elastomers have replaced rubber in many applications, especially in the automotive industry. Able to be repeatedly stretched without permanently deforming the shape of the part. Suitable for outdoor use because they offer good weather (especially ozone) resistance and UV properties. Chemical resistance is also high against a broad range R80 R to HB Polypropylene Excellent fatigue and bending properties: (hinge effect). No cracking under load and good impact resistance. Chemically inert. Good acoustically, withstands vibrations. Suitable for food use R110R to V Polyvinylidene fluoride Meets today s most stringent criteria. Outstanding chemical inertia. Good mechanical properties, excellent abrasion resistance friction coefficient low. Very high dielectric constants, radiation stability. Very large service temperature range, inflammable and self extinguishing. Suitable for use in food and medical sectors R to +200 V0 PEEK Good chemical and water resistance especially at high temperatures. Can be used continuously to Degrees (Celsius) and in hot water or steam without permanent loss of physical properties. Low smoke and toxic gas emission when exposed to flame to HB High density polyethylene Excellent electrical insulation properties, high resistance and rigidity, low loss factor. Suitable for food use. Friction coefficient low to V2 V Polycarbonate The best transparent material. Excellent mechanical properties, particularly impact resistance between º and +120ºC. Electrical insulation properties, retains dimensional stability even in humid environment. Self extinguishing, suitable for food and medical use (can be sterilised), can be US welded. Gas permeable No break V0 PTFE (Teflon) High chemical resistance, low and high chemical capability with good resistance to weathering. Low friction with excellent electrical and thermal insulation properties and slipperiness.
20 SUPREME Fasteners and Components Australia s Leading Supplier of High Quality Plastic Fasteners and Components WAREHOUSE / OFFICE: Unit 11, No. 5 Narabang Way, BELROSE NSW 2085, Australia PO Box 230, St Ives NSW 2075, Australia Telephone: (02) Fax: (02) sales@supfast.com.au Available from: For ALL Your Special Fastening Needs
QCB Thermoplastic Bearing Units
QCB Thermoplastic Bearing Units CAT TP 2017 E Ver1 NBC Group Ltd In the interest of continuing improvement, NBC Group Ltd reserves the right to modify any product or specification without prior notice.
Crastin PBT Thermoplastic polyester resins
Crastin PBT Thermoplastic polyester resins Product guide and properties Start with DuPont Engineering Polymers DuPont s registered trademark Crastin PBT Thermoplastic polyester resins Introduction CRASTIN
Tel +44 (0) Fax +44 (0)
Tel +44 (0)1235 815816 Fax +44 (0)1235 811234 E-mail oilite@bowman.co.uk Contents Page Company Profile 1-2 ISO Certificate 2 Product Pictures 3 Wrapped Bearings Technical Information 4 Wrapped Bearings
TECHNYL A 218 BLACK 21N
TECHNYL A 218 BLACK 21N Description TECHNYL A 218 Black 21 N is an unreinforced polyamide 66, standard viscosity, heat stabilized for injection moulding.it is available in black color. Key Properties Chemical
Wolf Kunststoff ZEDEX ZX-530 A5D Polymer Alloy
Wolf Kunststoff ZEDEX ZX-530 A5D Polymer Alloy Category : Polymer, Thermoplastic Material Notes: Main Characteristics: Low Creep; Low moisture absorption; Flame retardant; Low impurity ions; Good machinability;
iglidur G The General Purpose Bearing: most popular iglidur material worldwide
Standards Wide Range from Stock polymer bearings G The General Purpose Bearing: most popular material worldwide from page 51 J The Fast and Slow Motion Specialist: used in long-life applications, also
Delivery program Semi-finished plastics
Delivery program Semi-finished plastics Centroplast Engineering Plastics GmbH Engineering plastics belong to most important industrial materials. They convince above all by their level of performance and
Plastic bearings that revolve around your needs.
NON-CORROSIVE n NON-MAGNETIC n LIGHTWEIGHT Plastic bearings that revolve around your needs. FROM MAGNUS MOBILITY SYSTEMS ISO 9001-2008 Certified Plastic bearings that revolve around your needs We go to
Components: Dimensions / Order Codes Clamp Body. * 1st part of STAUFF Group 4. * Exact outside diameters Ø D1 / Ø D2 (mm) Clamp Body.
Components: Dimensions / Order Codes Clamp Body Clamp Body Colour: Green Material code: PP 4 PP One clamp body is consisting of two clamp halves. 1st part of STAUFF 4 Exact outside diameters Ø D1 / Ø D2
Components: Dimensions / Order Codes
Light Series LB Components: Dimensions / Order Codes Clamp Body Single Design ø D 2 B ø D 3 H S ø D 1 L2 L3 Order Codes Clamp Body Standard Materials Polypropylene Colour: Black Material code: PP Polyamide
Components: Dimensions / Order Codes. Clamp Body * *1*06*PP * * * * Clamp Body. ød2. Pipe / Tube / Hose Bore (1 Clamp Body)
ød Components: Dimensions / Order Codes Clamp Body ød B H L L L Clamp Body Colour: Green Material code: PP Colour: Black Material code: PA See page A88 for material properties and technical information.
ADVANCE System ADVANCE SYSTEM IP66 MODULAR SYSTEM FOR COMBINATION UNITS VERSIONS MODULE 136 MODULE 106. t. 56. Without protective devices
ADVANCE System ADVANCE SYSTEM IP66 MODULAR SYSTEM FOR COMBINATION UNITS Without protective devices Interlocked-switch socket outlets QUADRA Series socket outlets For 16 and 32 A currents Protection degree
Polyamide 6 for Injection Moulding
Polyamide 6 for Injection Moulding Promyde is a trademark of NUREL 1 NUREL Engineering Polymers Excellence in Polymerization Recent technical advancements in NUREL polymerization processes have enabled
Cable ties. Features Easy to install and remove. Provides protection to the wire bundle. Available in white and black
Features Easy to install and remove. Provides protection to the wire bundle. Available in white and black Applications Fast and economical grouping of wire bundles. Joining groups of wires and/or tubing.
Polyamide 6 & 66 for Injection Moulding
Polyamide 6 & 66 for Injection Moulding Promyde is a trademark of NUREL 1 NUREL Engineering Polymers Polymerization Integrated into In-House Compounding 50 years experience in polymerization processes
MITRAS MATERIALS GMBH
MITRAS MATERIALS GMBH Friedrich-Ochs-Str. 2 92637 Weiden/Opf. Tel.: 0961 / 89-810 / 89-812 Fax: 0961 / 89-672 Directory of services L a b o r a t o r y MITRAS MATERIALS GMBH Edition 02/18 Rev. 08 page
Antifreeze Resistant Fatigue Resistant Gasoline Resistance Automotive Under the Hood ASTM D 4066 PA012G30 ASTM D 6779 PA012G30
Vydyne R530H Nylon resins are general purpose polyamide, heat stabilized, hydrolysis resistant, 30% glass fiber reinforced resins. Available in natural and black. It is specifically designed to maximize
iglidur J The Fast and Slow Motion Specialist
iglidur The Fast and Slow Motion Specialist Used in long-life applications, also with soft shafts. The iglidur plain bearings are designed for the lowest coefficients of friction while running dry and
Low friction, low wear: The Fast and Slow Motion Specialist iglidur J
Low friction, low wear: The Fast and Slow Motion Specialist iglidur Over 250 sizes available from stock Low wear against different shaft materials Low coefficients of friction running dry Vibration dampening
Wiring Duct T1 Series - Slotted
Duct T1 Series - Slotted UL file E123572 T1 Series Gray Open Slot Rigid PVC (including cover) Catalog Standard Carton Package Quantity Price Catalog Single Piece Pkg Package Quantity Price T1-0506G 20
iglidur G The General Purpose Bearing
iglidur The eneral Purpose Bearing Most popular iglidur material worldwide. iglidur bearings cover an extremely wide range of different requirements they are truly all round. Typical applications cover
Dimensions / Order Codes
U-Bolt Clamps Dimensions / Flat Steel U-Bolt with Plastic Pipe Saddle (Short) and U-Profile Type FB+RUK (To be used as Fixed Point Clamps only) B1 ø D1 H4 H2 H3 H1 L2 L1 B2 Flat Steel U-Bolt (type FB)
Grommet TET. Cable glands. Basic Data. Application. Press the grommet into the hole.
Basic Data Description s available in two different materials, EPDM and CR. Suitable for Untapped holes of material from 0.5 to 4 thickness. For completely dust and watertight cable and pipe inlets. Advantages
ToppTube PA11 (Polyamide) page 4. ToppTube PA12 (Polyamide) page 5. ToppTube PA12HIPHL (Polyamide) page 6. ToppTube PUR 98A (Polyurethane) page 7
ToppTube PA11 (Polyamide) page 4 ToppTube PA12 (Polyamide) page 5 ToppTube PA12HIPHL (Polyamide) page 6 ToppTube PUR 98A (Polyurethane) page 7 ToppTube PE-LD (Polyethylene) page 8 ToppTube PE-LLD (Polyethylene)
Clamping Handles & Adjustable Tension Levers. Leaflet No. A03.1
I N D U S T R I A L M A N U F A C T U R I N G S I N C E 1 9 2 3 Leaflet No. A03.1 Clamping Handles & Adjustable Tension Levers I N D U S T R I A L M A N U F A C T U R I N G S I N C E 1 9 2 3 Who we are
Low wear on all shafts: The Marathon Runner iglidur W300
iglidur Low wear on all shafts: The Marathon Runner iglidur Over 400 sizes available from stock For especially long service life Low coefficient of friction Extremely high wear resistance Also suitable
ips Selection of materials PVC-U: Unplasticised Polyvinyl Chloride General properties of PVC-U
Selection of aterials Unplasticised Polyvinylchloride (PVC-U) is one of the oldest and ost widely used plastics for piping systes worldwide. It is a highly versatile aterial that is used for both pressure
AKROMID FR (PA 6.6, PA 6, PA 6.6/PA 6, PPA) AKROLOY FR (PA Blend)
FLAME-RETARDANT COMPOUNDS AKROMID FR (PA 6.6, PA 6, PA 6.6/PA 6, PPA) AKROLOY FR (PA Blend) AKRO-PLASTIC GmbH Member of the Feddersen Group Flame-retardant Products Increasingly Important for Extended
TABLE OF CONTENTS. Remember ROGERS for Rubber & Plastic page 2
TABLE OF CONTENTS BUTYL RUBBER... 4 BUTYL RUBBER SHEETS 60 SDH... 4 BUTYL RUBBER ROLLS 60 SDH... 4 EPDM RUBBER... 5 EPDM RUBBER SHEETS 60 SDH... 5 EPDM RUBBER ROLLS... 5 HYGIENIC WHITE RUBBER... 6 HYGIENIC
Datasheets - General Purpose Elastomers
Datasheets - General Purpose Elastomers Natural Rubber (NR) Market introduction 1840 Price indication, volume index compound 1,0 Service temperature, min C -50 Service temperature, max C +80 Mechanical
Elastollan Product Range
Thermoplastic Polyurethane Elastomers (TPU) Elastollan Product Range Elastogran is Polyurethanes Contents Quality management to DIN EN ISO 9001 Page 2 Nomenclature for Elastollan Page 3 Packaging, Storage
Series PVI/PVIF. Standard and Full Port Eccentric Plug Valves Conforming to AWWA C517
M M Series PVI/PVIF Standard and Full Port Eccentric Plug Valves Conforming to AWWA C517 Publication 517-105 Issue 11/13 Design Features Implementations The Eccentric Plug valve is the industry standard
Dinosaur Flexible Wiring Duct
Dinosaur Flexible Wiring Duct Dinosaur self-adhesive flexible duct is ideal for transporting wiring to cabinet doors from control panel interiors (for that part of the cable run that leans against the
abs section guide application guide standards and approvals
abs Acrylonitrile - Butadiene - Styrene (ABS) is a rigid pressure piping system renowned for its high impact strength and durability which combine to give exceptional toughness. It is suitable for use
Heat-Shrinkable Tubing
H-Tap Insulating Covers (Hard Covers) Interlocking insulating covers for H-type compression taps Easy installation: place the H-Tap in the cover and snap the cover closed Consult your Regional Sales Office
h Technical Product Data FW Pressure Pipe Systems
h Technical Product Data FW Pressure Pipe Systems E Engineering GmbH All rights reserved. Publication: 10/2012 All rights reserved. No part of this document may be reproduced or utilized in any form or
TUBE CLAMPS. Standard, Heavy & Twin
TUBE CLAMPS Standard, Heavy & Twin World Wide Metric distributes a complete line of tube clamps and mounting components according to the DIN standard. All clamps and components in the Standard Series,
Thermx PCT. High-performance Polyester. Product and Properties Guide
Thermx PCT High-performance Polyester Product and Properties Guide Thermx Chemical resistance Processability Dimensional stability Heat resistance Fast molding cycles Thermx PCT polyester is a hightemperature
KEEP YOUR FURNITURE AND EQUIPMENT PROTECTED
KEEP YOUR FURNITURE AND EQUIPMENT PROTECTED Our transit protection range is perfect for securing items from damage during transit. Check out our economical and easy ways to keep your furniture safe. We
Profile series I-40. System kit Profile series I-40
Profile series I-40 System kit Profile series I-40 n n n a n n n R n a R 45 Profile series I-40 Contents 1 Technical data/profile machining F f Page 1 2 Page 1 3 Page 1 5 Page 1 8 Profiles Page 2 2 3000
MATERIAL DATA SHEET* ALPANA d.o.o.
MATERIAL DATA SHEET* ALPANA d.o.o. Contents H-Pur Material Data Sheet... 2 LT-Pur Material Data Sheet... 3 S-Pur Material Data Sheet... 4 XH-Pur Material Data Sheet... 5 XSH-Pur Material Data Sheet...
The above data are preliminary and are subject to change as additional data are developed on subsequent lots.
Zenite LCP Product Information liquid crystal polymer resin 30% Glass Reinforced Liquid Crystal Polymer Resin PRELIMINARY DATA Zenite 7130 is a 30% glass reinforced LCP resin having excellent toughness
Technical Information
Technical Information Materials ISO- Code Material Colour Operating Temperature PA Polyamide Light grey PP PP-EL natural PP PVDF PVDF-EL PFA PTFE PTFE-EL PEEK Polypropylene Polypropylene Polypropylene
True Fit Tank Fittings
True Fit Tank Fittings SECTION NINE Level Alert Indicator TECHNICAL SPECIFICATIONS Female Tank Fitting Sanbra Fyffe Email: Ltd sales@herron.ie Email: sales@sanbra.ie Phone: +353 (0)71 91 33100 True Fit
VERONEX Cases MATERIAL PERFORMANCE CHARACTERISTICS. MECHANICAL PROPERTIES Units Test method Result. THERMAL PROPERTIES Units Test method Result
VERONEX Cases VERONEX is a breakthrough in plastic enclosure design, combining the versatility and functionality demanded by engineers, with the modern styling appreciated by their customers. The VERONEX
Model HD20F. DATA SHEET Specifications & Performance. Non-Metallic Flap Valve Design Level 1. Certified Quality
DATA SHEET Specifications & Performance Certified Quality Model HD20F Non-Metallic Flap Valve Design Level 1 Quality System ISO 9001 Certified Environmental Management System ISO 14001 Certified Warren
Higher Temperature PP-Based Composite Provides Nylon/PA- Level Performance at Lower Weight and Economic Feasibility
Higher Temperature PP-Based Composite Provides Nylon/PA- Level Performance at Lower Weight and Economic Feasibility Society of Plastic Engineers Automotive Composites Conference & Exhibition September
Manufacturer of Pig s Tail Protective Wrap
Manufacturer of Pig s Tail Protective Wrap ABOUT US Company Weldalloy, group of companies with production facilities on three continents, is the world s leading manufacturer of spiral protective wrap.
ISSUE 1/08/14 B E A R I N G S A N D C O M P O N E N T S Contents Company Profile Products Wrapped Bearings Technical Information WMU & WMXMU & WMX Wrapped Bearings Metric Plain U Type Wrapped Bearings
Texin 245 Covestro PUR Thermoplastic Polyurethane Elastomer (Polyester) Action Saturday, October 22, 2016 Units English Legend (Open) General Information Product Description Texin 245 resin is an aromatic
Product Datasheet. Cable TV Junction Box (Page 4)
JUNCTION BOX Product Datasheet Junction Box Bolted Type (Page 2) Cable TV Box (Page ) Cable TV Junction Box (Page 4) Telephone Box (Page 5) Telephone Junction Box (Page 6) GRP Junction Box Enclosures are
xirodur B180 Axial Ball Bearings Product Range
axial ball bearing xirodur B180 xial Ball Bearings Product Range Order key BB-510-B180-ES stainless steel balls glass balls GL = glass ES = stainless steel Material xirodur B180 Dimensions acc. to DIN
REMA TECHNICAL INFORMATION DIN 80, 160, 320. Page 1 of 13
DIN 80, 160, 320 C O N N E C T O R D A T A S H E E T Page 1 of 13 DIN 80, 160 and 320 Connector datasheet REMA is the leading supplier of DIN-style (DIN standard 43589) quick-disconnect power connectors.
Components: Dimensions / Order Codes
Components: Dimensions / Clamp Body ingle Design L B L L Clamp Body tandard Materials Thermoplastic Elastomer (87 hore-a) Colour: Black Material code: A ee page A90 for material properties and technical
UNREINFORCED TUBING 10
10 TUBING G400 COPPER TUBING The copper tubing shown here is soft copper (annealed temper) tube that is easily bent and formed, and suitable for easy use with compression and flare type fittings. It is
PREMIUM PLASTIC PROTECTION PARTS
PREMIUM PLASTIC PROTECTION PARTS MATERIAL OPTIONS Consistently low prices EP 180 Pressure Pipe Protection Uniplugs for PVC pipes DN 50 DN 600 EP 190 Driveshaft Protection Caps with Fitting Key EP 200 Stud
Cable Management Solutions. HelaGuard. Non-Metallic Conduits and Fittings
Cable Management Solutions HelaGuard Non-Metallic Conduits and Fittings Table of Contents Page HelaGuard Overview 4 Conduit Application Overview 6 Mounting & Removing HelaGuard Non-Metallic Fittings 7
Geomembrane Test Methods
Appendix 2 Geomembrane Test Methods AMERICAN SOCIETY FOR TESTING AND MATERIALS (arranged by number) ASTM D-5 ASTM D-36 ASTM D-256 ASTM D-412 ASTM D-413 ASTM D-471 ASTM D-570 ASTM D-638 ASTM D-696 ASTM
introduction FK Series Butterfly Valves Product Data Sheet
Product Data Sheet introduction < STANDARDS > ASTM D4101-86 ASTM D1784 ASTM D3222 IPEX FK Series Butterfly Valves offer superior strength and chemical resistance in highly corrosive environments and process
QUALITY FITS. Product range injection molding grades with reference data
QUALITY FITS. Product range injection molding grades with reference data POCAN COLOR NOMENCLATURE Pocan is available in a large number of colors. We use a six-digit number to precisely characterize the
25mm-500mm (1"- 20") SERIES 20/21 Wafer/Lug BUTTERFLY VALVES SANITARY AND CHEMICAL / RESILIENT SEATED. The High Performance Company
BUTTERFLY VALVES SANITARY AND CHEMICAL / RESILIENT SEATED SERIES 20/21 Wafer/Lug 25mm-500mm (1"- 20") The High Performance Company SERIES 20 25mm 500mm (1" 20") Bray Controls is proud to offer a high quality
Plug 16A 2P+E extra flat Wireable (body length up to 50 mm) SPA17. Plug 10A 2P+E straight S11. Plug 16A 2P+E straight S30. Plug 16A angled S30
CONTROL DEVICE REFERENCE STANDARDS UNSWITCH SOCKET OUTLETS EN 60669-1 Switches for household and similar fixed-electrical installation. Part 1: general requirements. Rated current: 10A-13A-15A-16A Rated
VSI. Series BFII WATERWORKS. BUTTERFLY VALVES CONFORMING TO AWWA C504 Replaceable Seated 24-Inch and Greater Butterfly Valve
M M Series BFII BUTTERFLY VALVES CONFORMING TO AWWA C504 Replaceable Seated 24-Inch and Greater Butterfly Valve Publication 504-106 Issue 06/12 Design Features General All AWWA Butterfly Valves are of
O-Rings & Circlips Catalogue
O-Rings & Circlips Catalogue 1 2 Contents O-Rings Table of Groove Dimensions for Dynamic & Static Sealing... 4 Resistance Properties of Various Elastomers... 5 Temperature Requirements... 6 Imperial: Guide
Halogen Free, Flame-retardant Polyether based TPU
STANDARD COLORS CMX Cable Markers Halogen Free, Flame-retardant Polyether based TPU TECHNICAL DATA SHEET Revision Number. 1 Last Edited 11. marts 2019 OTHER COLORS MATERIAL halogen free, flame retarded
The HELIXGUARD management looks back at over 3 decades of experience in Worldwide Application oriented Hydraulic industries.
HELI I GUARDG WELCOME TO HELIXGUARD The HELIXGUARD management looks back at over 3 decades of experience in Worldwide Application oriented Hydraulic industries. Recognizing and understanding the importance
PLASTIC RIVETS & SCREWS
PLASTIC RIVETS & SCREWS TR Kuhlmann is recognised throughout the industry for world class products & services We manufacture, stock & distribute a vast range of industrial fasteners & components Edition
HelaGuard. Non-Metallic Conduit & Fittings
HelaGuard Non-Metallic Conduit & Fittings HelaGuard Non-Metallic Conduit Systems Page HelaGuard Overview 3 Conduit Application Overview 4 Mounting & Removing HelaGuard Non-Metallic Fittings 5 HelaGuard
Pipeline Accessories. Flange Isolation Gaskets 4 pipes
Pipeline Accessories Flange Isolation Gaskets 4 pipes Flange Isolation Gaskets 4 pipes Combi-Seal G and Combi-Seal TW High quality flange gasket and electrical isolation point Flange Isolation Gasket TA
Single Wire Smooth Cover Double Wire Smooth Cover Extra Pressure Double Wire Wrapped Cover
SECTION 1 SAE100R1 Page 6 SAE100R2 Page 6 SAE100R2XP Page 7 SAE100R2GP Page 7 Quick Reference Taipan Hose Single Wire Smooth Cover Double Wire Smooth Cover Extra Pressure Double Wire Wrapped Cover SAE100R2H
Public Transportation Materials for a Moving Market
Public Transportation Materials for a Moving Market AKRO-PLASTIC GmbH Member of the Feddersen Group Weight-Reduced Products Gaining Importance for Applications in the Transportation Sector EU guidelines
Plastic Handles, T-Handles & PVC Grips. Leaflet No. A06.1
I N D U S T R I L M N U F T U R I N G S I N E 1 9 2 3 Leaflet No. 06.1 Plastic Handles, T-Handles & PV Grips I N D U S T R I L M N U F T U R I N G S I N E 1 9 2 3 Who we are Rencol s flexible manufacturing
Installation Devices 4
Installation Devices 4 4.1 Tapes HelaTape Flex - Vinyl Electrical Tapes HelaTape Wrap - Vinyl Tapes HelaTape Shield - Conductive Tapes HelaTape Flex 15 - All Purpose Vinyl Insulating Tape HelaTape Flex
PIPE CLAMPS & FLANGES
PIPE CLAMPS & FLANGES Clamping of pipes in installations is required for purposes of damping vibrations, providing support to the installation and preventing loosening of joints and welds. INTRODUCTION
Combi-Seal Flange Isolation Gaskets 4 pipes
Combi-Seal lange Isolation Gaskets 4 pipes Pipeline Accessories lange Isolating Technology 4 pipes Isolating flange gaskets 4 pipes are especially designed for: Carbon steel Stainless steel Contact Corrosion
TKD SERIES 3-WAY BALL VALVES - TRUE UNION
TKD SERIES 3-WAY BALL VALVES - TRUE UNION The TKD offers a host of advanced features that set it apart from other multi-port valves. The patented seat stop carrier allows for in-line micro-adjustment of
PSI FLANGE ISOLATION KITS
PSI LANGE ISOLATION KITS GLV-UNISEAL T GLV-UNISEAL GGR EASY INSTALLATION AND MAINTENANCE REE PERMANENTLY ELASTIC OVER THE ENTIRE SERVICE LIE HIGH STRESS RESISTANT O LOAD GASKET WWW.PSI-PRODUCTS.COM 177
Challenges For Future Powerplant Coolant Systems
Challenges For Future Powerplant Coolant Systems Steven Mok, Karla Butler, Terrence Cressy, Paul Kane, Brian Fish (Presented at SPE Auto EPCON, April 28, 2009. Sterling Heights, MI) 2 Discussion Agenda
There is Merbenit in there. Your industry product.
There is Merbenit in there. Your industry product. Bonding and sealing for industry Merbenit sealants Merbenit sealants and adhesives cure to permanent elastomers. They are suitable for joints and sealed
Metallic Systems TYPE SPTC
CONDUIT 27/01/2009 Technical Data Sheet Page No. 1 Applications Hospitals External Safety Critical Area Fittings IP54 SPB Fittings type A & B Characteristics Very High UV Resistance High Flexibility Medium
Tubing and Accessories
Section 7 Tubing and Accessories Inch Industrial Tubing...............................FIT-7-2 Metric Industrial Tubing.............................FIT-7-3 Inch D.O.T. Tubing.................................FIT-7-3
POlyNIl Product Brochure
POLYNIL Product Brochure APPLICATION PA6.6 Unreinforced for PRODUCT P50 FI P50 FIHS P50 FIBK P50 N P50 FL P50 FLBK P50 L Polynil P50 LBK PROPERTIES Internally Internally heat stabilized, Internally Nucleated,
Flexibility and strength
polyurethane and Flexibility and strength : Polyester Polyurethane or Polyamide PA12 Supply of air to pneumatic components Flexible and long lasting Excellent memory: returns to original shape Pressure
New Products Inside DUMETA OVERVIEW CATALOGUE COMPONENTS
New Products Inside DUMETA OVERVIEW CATALOGUE COMPONENTS 1 Modifications & Custom Components Diverse manufacturing capabilities and experienced on-site technical personnel allow Dumeta to offer a wide
compliance General Care Mandatory Levels Schlegal High Wind Compliance
compliance General Care Mandatory Levels Schlegal High Wind Compliance for your b&d door General Care COLORBOND and coloured steel finish doors Your B&D coloured steel door has been pre-painted with a
POLYETHYLENE High Density
POLYETHYLENE High Density PE-3408/PE-3608 ENGINEERED FOR WATER AND MINING PIPING SYSTEMS PLASTIC MANUFACTURES SINCE 1953 POLYTUBES HIGH MOLECULAR WEIGHT (HMW) High Density Polyethylene Pipe for General
ARMA BAĞLANTI SİSTEMLERİ A.Ş.
ARMA BAĞLANTI SİSTEMLERİ A.Ş. ARMA FIXING SYSTEMS, initially established as a molding workshop in 1980, is an innovative and dynamic company serving its customers in various sectors primarily automotive,
PTFE HOSE. Range 1.01 PTFE HOSE SMOOTH BORE PTFE HOSE Size : 1/8 to 1 1/8 Profile : Smoothbore Working Pressure : 5800 to kpa
01 1.01 Range SMOOTH BORE : 1/ to 1 1/ Profile : Smoothbore Working : 500 to 2300 kpa HIGH PRESSURE SMOOTH BORE PTFE : 1/4 to 1 1/2 Profile : Smoothbore Working : 27600 to 34500 kpa TAPE WRAPPED CONVOLUTED
MasterProtect 1870 / 1880
DESCRIPTION is a polysulfide based, chemical resistant two-component coating material for the systems MasterProtect 7800 and. FIELD OF APPLICATION is used as the impervious coating on MasterProtect 1860
A D V A N C E P R O D U C T S & S Y S T E M S, I N C.
MODEL SSI8 The Advance Model SSI8 Casing Spacers shall be constructed of circular carbon steel bands, which bolt together forming a shell around the carrier pipe. The spacers shall be designed with risers
ULTEM* 1010 Resin. SABIC Innovative Plastics - Polyether Imide. Actions. General Information. Product Description
ULTEM* 1010 Resin SABIC Innovative Plastics - Polyether Imide Actions General Information Product Description Transparent, enhanced flow Polyetherimide (Tg 217C). ECO Conforming, UL94 V0 and 5VA listing.
Installation device. HelaTape. Electrical tapes for sealing, insulation and bundling of cable and conduits.
Electrical tapes for sealing, insulation and bundling of cable and conduits. HellermannTyton offers a wide range of PVC and rubber tapes for sealing, insulation and bundling of cable and conduits. PVC-
Heat-Shrinkable Tubing
H-Tap Insulating Covers (Hard Covers) Interlocking insulating covers for H-type compression taps Easy installation: place the H-Tap in the cover and snap the cover closed Consult your Regional Sales Office
2-20 (50mm-500mm) SERIES 30/31 Wafer/Lug RESILIENT SEATED BUTTERFLY VALVES. The High Performance Company
BUTTERFLY VALVES RESILIENT SEATED SERIES 30/31 Wafer/Lug 2-20 (50mm-500mm) The High Performance Company SERIES 30/31 2-20 (50mm-500mm) Bray Controls is proud to offer a high quality line of butterfly valves
COMPRESSION TUBE FITTINGS PRODUCT CATALOG UNIQUE FITTINGS MOLDED FROM FOUR CORROSION-RESISTANT THERMORESINS
COMPRESSION TUBE FITTINGS PRODUCT CATALOG UNIQUE FITTINGS MOLDED FROM FOUR CORROSION-RESISTANT THERMORESINS Plastic Fittings That Revolutionized The Techniques of Connecting Tubes. understands the needs
CHEMCUT PARTS IDENTIFICATION GUIDE
CHEMCUT PARTS IDENTIFICATION GUIDE 1. Identify System Serial Number 2. Parts Identifer 3. Chemcut Nomenclature 4. Chemcut Gears 5. Componets And Materials Chemcut Corp. 500-1 Science Park Road. State College,
Neopolen. Contents. 1. Product 1.1 Description 1.2 Forms supplied 1.3 Delivery, Conveying, Storage
= registered trademark of BASF SE General Technical Information Neopolen Contents 1. Product 1.1 Description 1.2 Forms supplied 1.3 Delivery, Conveying, Storage 2. Processing 2.1 Filling the mold cavity
The Right Seal for Every Application
The Right Seal for Every Application O-Rings The O-ring s simple & inexpensive design remains a popular and universal choice for sealing static and dynamic hydraulic systems. It seals efficiently in both
GRP backing flanges DIN 2501 Flange connecting dimension PN10 WORK STANDARD. GRP backing flanges made of Polyester resin.
GRP backing flanges DIN 2501 Flange connecting dimension PN10 1310-WN-en 06 10.2002 GRP backing flanges made of Polyester resin. D 45 e d2 d1 b1 k Flange connecting dimensions according to DIN 2501 Part
ZHPCG CK0226 POWER CABLE WIRE & CABLE
ZHPCG CK0226 POWER CABLE WIRE & CABLE ZHPCG CK0226 POWER CABLE WIRE & CABLE Application/Use Rail approved zero Halogen Power Cables, available as 750V or 1800V rated. ZHPCG cables are all Halogen free,