Antifreeze Resistant Fatigue Resistant Gasoline Resistance Automotive Under the Hood ASTM D 4066 PA012G30 ASTM D 6779 PA012G30

Size: px

Start display at page:

Download "Antifreeze Resistant Fatigue Resistant Gasoline Resistance Automotive Under the Hood ASTM D 4066 PA012G30 ASTM D 6779 PA012G30"

Neal Cummings
5 years ago
Views:

1 Vydyne R530H Nylon resins are general purpose polyamide, heat stabilized, hydrolysis resistant, 30% glass fiber reinforced resins. Available in natural and black. It is specifically designed to maximize the retention of physical properties when exposed to anti-freeze solutions at elevated temperatures. This product is also lubricated for improved machine feed and flow. Glass reinforced Vydyne resins provide higher heat distortion temperature, resistance to creep, and better dimensional stability when compared with unreinforced Nylon 6,6. These products have good chemical resistance to a broad range of chemicals including gasoline, hydraulic fluids, and most solvents. Vydyne R530H is heat-stabilized to minimize oxidative degradation of the polymer when exposed to elevated temperatures in service. This product provides improved retention of physical properties under exposure to long-term heat. Also, Vydyne R530H has excellent knit line strength and fatigue resistance, which is essential for cycle testing with anti-freeze solutions. Typical Applications/End Uses: Vydyne R530H has been used for several under the hood automotive applications. The hydrolysis-resistant properties make it an excellent candidate for radiator end tank and heater core applications. General Material Status Commercial: Active Availability Asia Pacific Europe North America Filler / Reinforcement Glass Fiber, 30% Filler by Weight Additive Heat Stabilizer Lubricant Features Uses Agency Ratings Automotive Specifications UL File Number Antifreeze Resistant Fatigue Resistant Gasoline Resistance Automotive Under the Hood ASTM D 4066 PA012G30 ASTM D 6779 PA012G30 CHRYSLER MS-DB41 CPN4018 DAEWOO EDS-M FEDERAL LP410A FORD WSK-M4D642-A FORD WSK-M4D642-A2 E70062 Good Chemical Resistance Good Flow Heat Stabilized FED L-P-410A MIL M-20693B FORD WSK-M4D752-A GM GMP.PA Color: Black GM GMP.PA Color: Natural GM GMW3038P-PA66-GF30H GM GMW3038P-PA66-GF30H Color: Natural Appearance Black Natural Color Forms Processing Method Pellets Injection Molding Multi-Point Data Isothermal Stress vs. Strain (ISO ) Hydrolysis Resistant Lubricated Solvent Resistant OPEL QK H Color: Black OPEL QK H Color: Natural OPEL QK HW Color: Black TagAZ TAMS Last Updated: May, / 6

2 Physical Dry Conditioned Unit Test Method Density g/cm³ ISO 1183 Molding Shrinkage ISO Across Flow : 73 F, in % Flow : 73 F, in % Water Absorption (73 F, 24 hr) % ASTM D570 Water Absorption (Equilibrium, 50% RH) % ASTM D570 Mechanical Dry Conditioned Unit Test Method Tensile Modulus (73 F) 1.36E E+6 psi ISO Tensile Stress (Break, 73 F) psi ISO Tensile Strain (Break, 73 F) % ISO Flexural Modulus (73 F) 1.32E psi ISO 178 Flexural Strength (73 F) psi ISO 178 Poisson's Ratio (73 F) ISO 527 Impact Dry Conditioned Unit Test Method Charpy Notched Impact Strength ISO F ft lb/in² 73 F ft lb/in² Charpy Unnotched Impact Strength ISO F ft lb/in² 73 F ft lb/in² Notched Izod Impact Strength ISO F ft lb/in² 73 F ft lb/in² Last Updated: May, / 6

3 Thermal Dry Conditioned Unit Test Method Heat Deflection Temperature ISO 75-2/B 66 psi, Unannealed F Heat Deflection Temperature ISO 75-2/A 264 psi, Unannealed F Vicat Softening Temperature F ISO 306/B Melting Temperature (DSC) F ISO 3146 CLTE - Flow (73 to 131 F, in) 1.4E-6 -- in/in/ F ISO CLTE - Transverse (73 to 131 F, in) 5.6E-6 -- in/in/ F ISO RTI Elec UL in F in F in F RTI Imp UL in F in F in F RTI Str UL in F in F in F Electrical Dry Conditioned Unit Test Method Volume Resistivity (0.118 in) 3.0E ohm cm IEC Electric Strength 2 (0.118 in) V/mil IEC Arc Resistance (0.118 in) PLC 6 -- ASTM D495 Comparative Tracking Index (CTI) (0.118 in) PLC 2 -- UL 746 Comparative Tracking Index (0.118 in) 250 to V IEC High Amp Arc Ignition (HAI) UL in PLC in PLC in PLC 0 -- High Voltage Arc Tracking Rate (HVTR) UL in PLC 1 -- Hot-wire Ignition (HWI) UL in PLC in PLC in PLC 4 -- Last Updated: May, / 6

4 Flammability Dry Conditioned Unit Test Method Flame Rating UL in, All colors HB in, All colors HB in, All colors HB -- Isothermal Stress vs. Strain (ISO ) Stress (psi) Dry: -40 F Dry: 73 F Dry: 160 F Dry: 210 F Dry: 260 F Dry: 300 F Dry: 340 F Conditioned: -40 F Conditioned: 73 F Conditioned: 160 F Conditioned: 210 F Conditioned: 260 F Conditioned: 300 F Conditioned: 340 F Strain (in/in) Last Updated: May, / 6

5 Injection Dry Unit Drying Temperature < 158 F Drying Time 1.0 to 3.0 hr Suggested Shot Size 40 to 80 % Suggested Max Regrind 25 % Rear Temperature 536 to 590 F Middle Temperature 536 to 590 F Front Temperature 536 to 590 F Nozzle Temperature 536 to 590 F Processing (Melt) Temp 545 to 581 F Mold Temperature 149 to 203 F Injection Pressure 7980 to psi Injection Rate Fast Holding Pressure 7980 to psi Back Pressure 29.0 to 145 psi Screw Speed 60 to 120 rpm Clamp Tonnage 1.9 to 4.5 tons/in² Cushion to in Injection Notes Injection Time: <1 to 2.5 sec Last Updated: May, / 6

Notes Typical properties: these are not to be construed as specifications. 1 Typical properties: these are not to be construed as specifications.

6 Notes Typical properties: these are not to be construed as specifications. 1 Typical properties: these are not to be construed as specifications. 2 Step-by-step North America Europe +32 (10) Asia Disclaimer of Warranty and Liability NOTICE: Although the information and recommendations set forth herein (hereinafter Information ) are presented in good faith and believed to be correct as of the date hereof, Ascend Performance Materials, LLC makes no representations or warranties as to the completeness or accuracy thereof. Information is supplied upon the condition that the persons receiving same will make their own determination as to its suitability for their purposes prior to use. In no event will Ascend Performance Materials, LLC be responsible for damages of any nature whatsoever resulting from the use of or reliance upon Information or the products to which Information refers. Nothing contained herein is to be construed as a recommendation to use any product, equipment, or formulation in conflict with any patent, and Ascend Performance Materials, LLC makes no representation or warranty, express or implied, that use thereof will not infringe any patent. No representations or warranties, either express or implied, of merchantability, fitness for a particular purpose, or of any other nature are made hereunder with respect to Information or the product to which Information refers. Last Updated: May, / 6

ULTEM* 1010 Resin. SABIC Innovative Plastics - Polyether Imide. Actions. General Information. Product Description

ULTEM* 1010 Resin. SABIC Innovative Plastics - Polyether Imide. Actions. General Information. Product Description ULTEM* 1010 Resin SABIC Innovative Plastics - Polyether Imide Actions General Information Product Description Transparent, enhanced flow Polyetherimide (Tg 217C). ECO Conforming, UL94 V0 and 5VA listing.