Crastin PBT Thermoplastic polyester resins
|
|
|
- Angelica Palmer
- 5 years ago
- Views:
Transcription
1 Crastin PBT Thermoplastic polyester resins Product guide and properties Start with DuPont Engineering Polymers DuPont s registered trademark
2 Crastin PBT Thermoplastic polyester resins Introduction CRASTIN is the DuPont trade name for thermoplastic polyesters based on polybutylene terephthalate (PBT). By physical and technical modification, it is possible to create a wide range of products to fulfill the demands of various applications; e.g. electronics, electrical, automotive, mechanical engineering, chemical, domestic appliances and sporting goods. Characteristic properties of CRASTIN The CRASTIN product range offers grades with different property profiles. Key properties are: Mechanical properties Excellent stiffness and hardness Good toughness Good static and dynamic long term behaviour Physical properties Dimensional stability, even at high temperatures High heat deflection temperature Good heat ageing resistance Flame retardant grades (V-0, according to UL 94) Good friction and wear properties Post moulding operations Assembly Welding (Ultrasonic-, Vibration-, Spin-) Snap fits Screwing Glueing Decorating Painting Printing Hot stamping Laser marking Supply form Cylindrical pellets supplied in 25 kg recyclable bags, in 1000 kg loads on CP-7 pallets and 1000 kg Octabins on CP-9 pallets. Environment can be incinerated with energy recovery represents no known risk to human health or the environment when land filled is not restricted for inter European transport of waste destined for recovery Electrical properties Excellent electrical insulating properties Special grades with a high arc resistance and a high comparative tracking index Effect of environmental exposure High chemical resistance Low risk of stress cracking Low influence of humidity on mechanical and electrical properties Other properties Good surface finish Fully compounded colours available Processing Standard injection moulding machines Good flow properties Short cycle times Pre-drying required ( C, 2 to 4 hours, preferably in dessicant dryers) 1
3 CRASTIN PBT Product Line Non-flame retardant Flame retardant Multi purpose S600 S650 FR Easy flow CE6125 L CE1064, S680 FR Fast cycling S620 Extrusion 6129, 6130 High impact ST820 T850 FR Multi purpose SK601, SK602, SK603, SK641 FR, SK642 FR, SK643 FR, SK605, SK608, SK609 SK645 FR, CE7931, SK673 GW Easy flow SK645 FRC Glass Surface gloss SK9215, SK9220, SK9230, LW9236 Reinforced Low warpage LW9020, LW9030, LW9020 FR, LW9030 FR LW9236, LW9130 High impact T801, T803, T805 T841 FR, T843 FR, T845 FR Glass/mineral High tracking HTI619 HTI668 FR, HTI688 FR Glass beads Low warpage SO653, SO655 HTI681 FR or mineral filled High tracking HTI681 FR 2
4 Compositions Designation CRASTIN S600 CRASTIN CE6125 L CRASTIN S620 CRASTIN 6129 CRASTIN 6130 CRASTIN ST820 CRASTIN SK601 CRASTIN SK602 CRASTIN SK603 CRASTIN SK605 CRASTIN SK608 CRASTIN SK609 CRASTIN SK9215 CRASTIN SK9220 CRASTIN SK9230 CRASTIN LW9130 CRASTIN LW9020 CRASTIN LW9030 CRASTIN LW9236 CRASTIN T801 CRASTIN T803 CRASTIN T805 CRASTIN HTI619 CRASTIN SO653 CRASTIN SO655 Description Non-flame retardant polybutylene terephthalate (PBT) Basic, un, high viscosity Basic, un, medium viscosity Basic, un, medium viscosity, fast cycling Basic, un, non lubricated (suitable for extrusion) Basic, un, non lubricated (suitable for extrusion) Toughened, un grade Basic, 10% glass grade Basic, 15% glass grade Basic, 20% glass grade Basic, 30% glass grade Basic, 45% glass grade Basic, 50% glass grade High gloss, 15% glass blend High gloss, 20% glass blend High gloss, 30% glass blend Low warpage, 30% glass grade Low warpage, 20% glass blend Low warpage, 30% glass blend Low warpage, high gloss, 36% glass flakes/fibres blend Toughened, 10% glass grade Toughened, 20% glass grade Toughened, 30% glass grade Track resistant, 50% mineral filled and glass grade Basic, 20% glass bead filled grade Basic, 30% glass bead filled grade CRASTIN S650 FR CRASTIN CE1064 CRASTIN S680 FR CRASTIN T850 FR CRASTIN SK641 FR CRASTIN SK642 FR CRASTIN SK643 FR CRASTIN SK645 FR CRASTIN CE7931 CRASTIN SK673 GW CRASTIN SK645 FRC CRASTIN LW9020 FR CRASTIN LW9030 FR CRASTIN T841 FR CRASTIN T843 FR CRASTIN T845 FR CRASTIN HTI681 FR CRASTIN HTI668 FR CRASTIN HTI688 FR Flame retardant polybutylene terephthalate (PBT) Basic, un grade Basic, un, easy flow grade Basic, un, very easy flow grade Toughened, un grade Basic, 10% glass grade Basic, 15% glass grade Basic, 20% glass grade Basic, 30% glass grade Basic, 30% glass grade Glow wire resistant 960 C, 20% glass grade Basic, 30% glass grade, easy flow grade Low warpage, 20% glass blend Low warpage, 30% glass blend Toughened, 10% glass grade Toughened, 20% glass grade Toughened, 30% glass grade Track resistant, 10% mineral filled grade Track resistant, 45% mineral filled and glass grade Track resistant, 45% glass and mineral filled grade 3
5 Properties of non-flame retardant CRASTIN PBT grades MECHANICAL THERMAL Test Method Multipurpose Easy flow Fast cycling Extrusion Property conditions ISO Units S600 CE6125 L S Yield stress 1) 23 C 527-1/2 MPa Yield strain 1) 23 C 527-1/2 % 3,6 3,8 3,6 3,6 Stress at break 1) 23 C 527-1/2 MPa Strain at break 1) 50 mm/min 527-1/2 % >50 >50 36 >50 5 mm/min 527-1/2 % Tensile modulus 1) 1 mm/min 527-1/2 MPa Tensile creep modulus 1) 1 h 899 MPa h Flexural strength 2) 178 MPa Ball indentation hardness 2) H 358/ MPa H 961/30 Izod notched impact 23 C 180/1A kj/m 2 6, ,5 strength 2) 30 C 6 3,5 5 6 Izod Impact strength 23 C 180/1U kj/m 2 NB 142 NB 30 C Charpy notched impact 23 C 179/1eA kj/m 2 4,2 5,6 5,7 5,5 strength 3) 30 C 4 5,2 3,4 4 Charpy Impact strength 23 C 179/1eU kj/m 2 NB NB NB NB 30 C NB NB 45 NB Melting temperature 10 K/min DSC C Temperature of deflection 0,45 MPa 75 C under load 4) 1,8 MPa ,0 MPa Coefficient of linear parallel ASTM E /K 1,3 1,3 1,3 1,3 thermal expansion normal 1,3 1,3 1,3 1,3 Thermal conductivity DIN W/(mK) 0,25 0,25 0,25 0,25 Vicat softening 50 K/h; 10 N 306 C temperature 5) 50 K/h; 50 N Hot ball pressure test Plate 3 mm VDE 0470 C Temperature index 3,2 mm UL 746B C electrical mechanical with impact mechanical without impact Stress at break 5000 h IEC 216 C h Glass High Extrusion impact Multi-purpose Surface gloss 6130 ST820 SK601 SK602 SK603 SK605 SK608 SK609 SK9215 SK9220 SK , >50 >50 3,7 3,6 3,3 2,6 1,8 1,7 3,5 3 2, , , NB ,4 11,5 7,5 9, , ,8 11,1 12,2 NB NB ,3 1,9 0,6 0,5 0,4 0,3 0,2 0,2 1,3 1,9 1,2 1,1 1,0 0,9 0,8 0,8 0,25 0,25 0,26 0,27 0,28 0,32 0, Properties are not applicable for this material. 1) Tensile test bar 4 mm (ISO 3167). 2) Test bar of mm. 3) Test bar of mm. 4) Test bar of mm. 5) Specimen of mm. These values are for these specific compositions only. Additives of any kind may alter some or all of these properties. The data listed here fall within the normal range of product properties but they should not be used to establish specification limits nor used alone as the basis of design. 4 5
6 Properties of non-flame retardant CRASTIN PBT grades (continued) PROCESSING MISC. FLAMMABILITY ELECTRICAL Test Method Multipurpose Easy flow Fast cycling Extrusion Property conditions ISO Units S600 CE6125 L S Volume resistivity 6) IEC 93 ohm cm >10 16 >10 16 >10 16 >10 16 Surface resistivity 6) IEC 93 ohm >10 14 >10 14 >10 14 >10 14 Relative permittivity 7) 50 Hz IEC Hz 3,2 3,2 3,2 3,2 Dissipation factor 7) 50 Hz IEC Hz Electric strength, 1 mm plate P25/P75 IEC kv/mm mm plate 20 s Electrolytical corrosion 8) IEC 426 rating A1 A1 A1 A1 Arc resistance 4 mm plate ASTM D495 s Comparative tracking index 9) CTI IEC 112 V >600 >600 >600 >600 CTI-M 350 M 350 M Flammability 0,8 mm UL 94 rating HB HB HB 1,6 mm UL 94 rating HB HB HB HB 1,6 mm ASTM D635 cm/min 2,6 2,6 2,6 2,6 1,6 mm ASTM D635 s 1,6 mm ASTM D635 mm Oxygen Index ASTM D2863 % Glow wire test Plate 3 mm IEC C Density 10) 1183 g/cm 3 1,31 1,31 1,31 1,31 Humidity absorption 23 C, 50% RH 62 % 0,20 0,20 0,20 0,20 Water absorption 23 C, saturation 62 % 0,50 0,50 0,50 0,50 Melt temperature C Mould temperature C ca. 80 ca. 80 ca. 80 ca. 80 ca. 80 Moulding shrinkage Specimen of DIN % mm parallel 1,6 1,6 1,6 1,6 1,6 normal 1,6 1,6 1,6 1,6 1,6 Flow length (spiral flow) 7 2 mm mm at 100 MPa injection pressure Glass High Extrusion impact Multi-purpose Surface gloss 6130 ST820 SK601 SK602 SK603 SK605 SK608 SK609 SK9215 SK9220 SK9230 >10 16 >10 16 >10 16 >10 16 >10 16 >10 16 >10 16 >10 16 >10 14 >10 14 >10 14 >10 14 >10 14 >10 14 >10 14 > ,1 4,2 4,4 4,1 4,1 3, ,5 3,6 3,8 3,9 3, A1 A1 A1 A1 A1 A1 A >600 > >600 M 200 M 200 M 200 M 200 M 200 M 200 M HB HB HB HB HB HB HB HB HB HB HB HB HB HB HB HB HB HB HB HB HB 2,6 4,6 3,7 3,7 3,7 3,0 2,5 2, ,31 1,21 1,37 1,41 1,45 1,53 1,67 1,71 1,43 1,47 1,55 0,20 0,18 0,17 0,15 0,13 0,11 0,10 0,50 0,45 0,42 0,40 0,37 0,27 0, ca. 80 ca. 80 ca. 80 ca. 80 ca. 80 ca. 80 ca. 80 ca. 80 ca. 80 ca. 80 ca. 80 1,6 2,2 0,6 0,6 0,4 0,3 0,25 0,25 1,6 2,2 1,2 1,2 1,1 1,0 0,85 0, ) Specimen of mm. According to Campus, version 1.2 (measured without sticking electrode). 7) Specimen of mm, measured with silver paint. 8) Specimen of mm. 9) Specimen of >15 >15 4 mm. 10) Specimen of > mm. These values are for these specific compositions only. Additives of any kind may alter some or all of these properties. The data listed here fall within the normal range of product properties but they should not be used to establish specification limits nor used alone as the basis of design. 6 7
7 Properties of non-flame retardant CRASTIN PBT grades MECHANICAL THERMAL Test Method Low warpage Property conditions ISO Units LW9130 LW9020 LW9030 LW9236 Yield stress 1) 23 C 527-1/2 MPa Yield strain 1) 23 C 527-1/2 % Stress at break 1) 23 C 527-1/2 MPa Strain at break 1) 50 mm/min 527-1/2 % 5 mm/min 527-1/2 % 2,6 3,2 2,8 3 Tensile modulus 1 mm/min 527-1/2 MPa Tensile creep modulus 1 h 899 MPa h Flexural strength 2) 178 MPa Ball indentation hardness 2) H 358/ MPa H 961/ Izod notched Impact strength 2) 23 C 180/1A kj/m ,7 30 C Izod Impact strength 23 C 180/1U kj/m C Charpy notched Impact strength 3) 23 C 179/1eA kj/m 2 13,8 9,8 10,4 4,7 30 C 11,7 7,6 9,3 Charpy Impact strength 23 C 179/1eU kj/m C Melting temperature 10 K/min DSC C Temperature of deflection 0,45 MPa 75 C under load 4) 1,8 MPa ,0 MPa 132 Coefficient of linear thermal parallel ASTM E /K 0,3 0,3 0,25 expansion normal 1,0 1,0 1,0 Thermal conductivity DIN W/(mK) 0,28 0,25 0,26 Vicat softening temperature 5) 50 K/h; 10 N 306 C K/h; 50 N Hot ball pressure test Plate 3 mm VDE 0470 C Temperature index 3,2 mm UL 746B C electrical mechanical with impact mechanical without impact Stress at break 5000 h IEC 216 C h Glass/ mineral Glass Glass Glass beads filled High High impact tracking Low warpage T801 T803 T805 HTI619 SO653 SO ,2 1,5 10,5 5, , ,5 5,8 4,1 4,2 8 12,6 5,2 3,7 3, , , ,35 0,3 0,3 1,1 1,0 1,6 1,2 0,7 1,1 1,0 0,28 0,48 0,27 0, These values are for these specific compositions only. Additives of any kind may alter some or all of these properties. The data listed here fall within the normal range of product properties but they should not be used to establish specification limits nor used alone as the basis of design. Properties are not applicable for this material. 1) Tensile test bar 4 mm (ISO 3167). 2) Test bar of mm. 3) Test bar of mm. 4) Test bar of mm. 5) Specimen of mm. 8 9
8 Properties of non-flame retardant CRASTIN PBT grades (continued) Glass Test Method Low warpage Property conditions ISO Units LW9130 LW9020 LW9030 LW9236 Glass Glass/ mineral Glass beads filled High High impact tracking Low warpage T801 T803 T805 HTI619 SO653 SO655 Volume resistivity 6) IEC 93 ohm cm >10 16 >10 15 >10 15 >10 16 >10 16 >10 16 >10 16 >10 15 >10 15 Surface resistivity 6) IEC 93 ohm >10 14 >10 13 >10 13 >10 14 >10 14 >10 14 >10 14 >10 14 >10 14 Relative permittivity 7) 50 Hz IEC 250 4,0 3,6 3, Hz 3,5 3,4 3,6 3,8 4,4 4,4 4,0 4,6 3,6 4,0 3,8 3,7 3,9 ELECTRICAL Dissipation factor 7) 50 Hz IEC Hz Electric strength, 1 mm plate P25/P75 IEC kv/mm mm plate 20 s Electrolytical corrosion 8) IEC 426 rating A1 A1 A1 A1 A1 A1 A1 Arc resistance 4 mm plate ASTM D495 s Comparative tracking index 9) CTI IEC 112 V CTI-M 200 M 175 M 175 M > M 200 M 200 M 200 M FLAMMABILITY Flammability 0,8 mm UL 94 rating HB HB 1,6 mm UL 94 rating HB HB HB HB 1,6 mm ASTM D635 cm/min 4,0 5,0 5,0 1,6 mm ASTM D635 s 1,6 mm ASTM D635 mm Oxygen Index ASTM D2863 % HB HB HB HB HB HB HB HB HB HB HB HB 3,5 4,9 2,7 2, Glow wire test Plate 3 mm IEC C Density 10) 1183 g/cm 3 1,51 1,35 1,43 1,56 1,35 1,42 1,50 1,71 1,45 1,53 MISC. Humidity absorption 23 C, 50% RH 62 % 0,14 0,26 0,24 Water absorption 23 C, saturation 62 % 0,35 0,78 0,72 0,14 0,14 0,14 0,20 0,15 0,12 0,45 0,40 0,35 0,50 0,40 0,35 Melt temperature C Mould temperature C >80 ca. 80 ca. 80 ca. 80 ca. 80 ca. 80 ca. 80 ca. 80 ca. 80 ca. 80 PROCESSING Moulding shrinkage Specimen of DIN % mm parallel 0,2 0,3 0,2 normal 0,5 0,6 0,5 Flow length (spiral flow) 7 2 mm mm at 100 MPa injection pressure 0,2 0,25 0,4 1,5 1,4 0,9 0,7 0,9 1,5 1, These values are for these specific compositions only. Additives of any kind may alter some or all of these properties. The data listed here fall within the normal range of product properties but they should not be used to establish specification limits nor used alone as the basis of design. 6) Specimen of mm. According to Campus, version 1.2 (measured without sticking electrode). 7) Specimen of mm, measured with silver paint. 8) Specimen of mm. 9) Specimen of >15 >15 4 mm. 10) Specimen of > mm
9 Properties of flame retardant CRASTIN PBT grades MECHANICAL THERMAL Multi- High Multi- Test Method purpose Easy flow impact purpose Property conditions ISO Units S650 FR CE1064 S680 FR T850 FR SK641 FR Yield stress 1) 23 C 527-1/2 MPa Yield strain 1) 23 C 527-1/2 % 3,7 3,7 3,4 Stress at break 1) 23 C 527-1/2 MPa Strain at break 1) 50 mm/min 527-1/2 % 9 5, mm/min 527-1/2 % 13,0 7,2 5,5 25 3,1 Tensile modulus 1 mm/min 527-1/2 MPa Tensile creep modulus 1 h 899 MPa h Flexural strength 2) 178 MPa Ball indentation hardness 2) H 358/ MPa H 961/ Izod notched Impact strength 2) 23 C 180/1A kj/m C Izod Impact strength 23 C 180/1U kj/m C Charpy notched Impact strength 3) 23 C 179/1eA kj/m 2 4,0 4,0 4,1 12,6 5,2 30 C 3,3 3,0 3,7 5,1 4,7 Charpy Impact strength 23 C 179/1eU kj/m NB C NB 37 Melting temperature 10 K/min DSC C Temperature of deflection 0,45 MPa 75 C under load 4) 1,8 MPa ,0 MPa 152 Coefficient of linear thermal parallel ASTM E /K 1,2 1,1 1,3 1,4 0,6 expansion normal 1,2 1,1 1,3 1,4 1,1 Thermal conductivity DIN W/(mK) 0,26 0,26 0,26 Vicat softening temperature 5) 50 K/h; 10 N 306 C K/h; 50 N Hot ball pressure test Plate 3 mm VDE 0470 C Temperature index 3,2 mm UL 746B C electrical mechanical with impact mechanical without impact Stress at break 5000 h IEC 216 C h Glass Glass Glass/mineral Multipurpose Easy flow Low warpage High impact High tracking SK642 FR SK643 FR SK645 FR CE7931 SK673 GW SK645 FRC LW9020 FR LW9030 FR T841 FR T843 FR T845 FR HTI681 FR HTI668 FR HTI688 FR ,0 2,8 2,5 2,2 2,9 2,1 2,5 2,2 5,2 4,5 3,7 2,2 2,0 1, , ,8 8,5 9,5 10,9 11,3 9,5 7,6 8,7 7,8 11,6 10,9 3,6 4,8 8,2 7,1 7,8 9,4 11,4 9,8 6,8 8,1 5 8,5 10 3,7 3,9 7, ,5 0,4 0,3 0,27 0,43 0,3 0,25 0,7 0,4 0,3 1,1 0,4 0,3 1,1 1,0 0,9 1,4 1,5 1,0 0,8 1,4 1,3 1,2 1,1 1,0 0,9 0,27 0,28 0,29 0,25 0,26 0,26 0,28 0,29 0,27 0,51 0, Properties are not applicable for this material. 1) Tensile test bar 4 mm (ISO 3167). 2) Test bar of mm. 3) Test bar of mm. 4) Test bar of mm. 5) Specimen of mm. These values are for these specific compositions only. Additives of any kind may alter some or all of these properties. The data listed here fall within the normal range of product properties but they should not be used to establish specification limits nor used alone as the basis of design
10 Properties of flame retardant CRASTIN PBT grades (continued) PROCESSING MISC. FLAMMABILITY ELECTRICAL Multi- High Multi- Test Method purpose Easy flow impact purpose Property conditions ISO Units S650 FR CE1064 S680 FR T850 FR SK641 FR Volume resistivity 6) IEC 93 ohm cm >10 16 >10 16 >10 16 >10 16 >10 16 Surface resistivity 6) IEC 93 ohm >10 14 >10 14 >10 14 >10 14 >10 14 Relative permittivity 7) 50 Hz IEC 250 3,5 3,6 3,5 3,4 3, Hz 3,5 3,5 3,5 3,2 3,4 Dissipation factor 7) 50 Hz IEC Hz Electric strength, 1 mm plate P25/P75 IEC kv/mm mm plate 20 s Electrolytical corrosion 8) IEC 426 rating A1 A1,2 A1,2 A1 Arc resistance 4 mm plate ASTM D495 s Comparative tracking index 9) CTI IEC 112 V > CTI-M 175 M 175 M 175 M 275 M 175 M Flammability 0,8 mm UL 94 rating V-0 V-0 V-0 1,6 mm UL 94 rating V-0 V-0 V-0 V-0 V-0 1,6 mm ASTM D635 cm/min 1,6 mm ASTM D635 s <5 <5 <5 <5 <5 1,6 mm ASTM D635 mm <5 <5 <5 <5 <5 Oxygen Index ASTM D2863 % Glow wire test Plate 3 mm IEC C Density 10) 1183 g/cm 3 1,47 1,48 1,49 1,40 1,52 Humidity absorption 23 C, 50% RH 62 % 0,15 0,16 0,16 0,22 0,15 Water absorption 23 C, saturation 62 % 0,39 0,40 0,40 0,55 0,35 Melt temperature C Mould temperature C ca. 80 ca. 80 ca. 80 ca. 80 ca. 80 Moulding shrinkage Specimen of DIN % mm parallel 1,7 2,1 1,9 1,9 0,6 normal 1,7 2,1 1,9 1,9 1,3 Flow length (spiral flow) 7 2 mm mm at 100 MPa injection pressure Glass Glass Glass/mineral Multipurpose Easy flow Low warpage High impact High tracking SK642 FR SK643 FR SK645 FR CE7931 SK673 GW SK645 FRC LW9020 FR LW9030 FR T841 FR T843 FR T845 FR HTI681 FR HTI668 FR HTI688 FR >10 16 >10 16 >10 16 >10 16 >10 16 >10 16 >10 15 >10 15 >10 16 >10 16 >10 16 >10 16 >10 16 >10 16 >10 14 >10 14 >10 14 >10 14 >10 14 >10 16 >10 13 >10 13 >10 14 >10 14 >10 14 >10 14 >10 14 > ,7 3,8 4,5 4,2 4,0 3,7 3,8 4,0 4,1 4,2 3,5 5,3 4,9 3,5 3,7 3,8 4,1 3,6 3,5 3,6 3,8 3,9 4,0 3,5 4,1 4, A1 A1,2 A1,2 A1,2 A1, 2 A1 A1 A1 A1 A1,2 A >600 > M 175 M 175 M 150 M 175 M 175 M 175 M 175 M 175 M 175 M 450 M 200 M 200 M V-0 V-0 V-0 V-0 V-0 V-0 V-0 V-0 V-2 V-0 V-0 V-0 V-0 V-0 V-0 V-0 V-0 V-0 <5 <5 <5 <5 <5 <5 <5 <5 <5 <5 <5 <5 <5 <5 <5 <5 <5 <5 <5 <5 <5 <5 <5 < ,55 1,59 1,69 1,68 1,56 1,69 1,51 1,56 1,53 1,59 1,69 1,51 1,75 1,77 0,14 0,13 0,10 0,10 0,12 0,23 0,21 0,15 0,13 0,10 0,15 0,20 0,20 0,33 0,32 0,30 0,30 0,35 0,78 0,72 0,36 0,31 0,27 0,37 0,50 0, ca. 80 ca. 80 ca. 80 ca. 80 ca. 80 ca. 80 ca. 80 ca. 80 ca. 80 ca. 80 ca. 80 ca. 80 ca. 80 ca. 80 0,6 0,4 0,35 0,35 0,45 0,35 0,25 0,7 0,3 0,25 1,9 0,4 0,3 1,2 1,1 1,0 1,1 1,2 0,6 0,55 1,1 1,0 0,9 1,9 0,8 0, ) Specimen of mm. According to Campus, version 1.2 (measured without sticking electrode). 7) Specimen of mm, measured with silver paint. 8) Specimen of mm. 9) Specimen of >15 >15 4 mm. 10) Specimen of > mm. These values are for these specific compositions only. Additives of any kind may alter some or all of these properties. The data listed here fall within the normal range of product properties but they should not be used to establish specification limits nor used alone as the basis of design
Polyamide 6 for Injection Moulding
Polyamide 6 for Injection Moulding Promyde is a trademark of NUREL 1 NUREL Engineering Polymers Excellence in Polymerization Recent technical advancements in NUREL polymerization processes have enabled
TECHNYL A 218 BLACK 21N
TECHNYL A 218 BLACK 21N Description TECHNYL A 218 Black 21 N is an unreinforced polyamide 66, standard viscosity, heat stabilized for injection moulding.it is available in black color. Key Properties Chemical
POlyNIl Product Brochure
POLYNIL Product Brochure APPLICATION PA6.6 Unreinforced for PRODUCT P50 FI P50 FIHS P50 FIBK P50 N P50 FL P50 FLBK P50 L Polynil P50 LBK PROPERTIES Internally Internally heat stabilized, Internally Nucleated,
Wolf Kunststoff ZEDEX ZX-530 A5D Polymer Alloy
Wolf Kunststoff ZEDEX ZX-530 A5D Polymer Alloy Category : Polymer, Thermoplastic Material Notes: Main Characteristics: Low Creep; Low moisture absorption; Flame retardant; Low impurity ions; Good machinability;
AKROMID FR (PA 6.6, PA 6, PA 6.6/PA 6, PPA) AKROLOY FR (PA Blend)
FLAME-RETARDANT COMPOUNDS AKROMID FR (PA 6.6, PA 6, PA 6.6/PA 6, PPA) AKROLOY FR (PA Blend) AKRO-PLASTIC GmbH Member of the Feddersen Group Flame-retardant Products Increasingly Important for Extended
QUALITY FITS. Product range injection molding grades with reference data
QUALITY FITS. Product range injection molding grades with reference data POCAN COLOR NOMENCLATURE Pocan is available in a large number of colors. We use a six-digit number to precisely characterize the
Polyamide 6 & 66 for Injection Moulding
Polyamide 6 & 66 for Injection Moulding Promyde is a trademark of NUREL 1 NUREL Engineering Polymers Polymerization Integrated into In-House Compounding 50 years experience in polymerization processes
MITRAS MATERIALS GMBH
MITRAS MATERIALS GMBH Friedrich-Ochs-Str. 2 92637 Weiden/Opf. Tel.: 0961 / 89-810 / 89-812 Fax: 0961 / 89-672 Directory of services L a b o r a t o r y MITRAS MATERIALS GMBH Edition 02/18 Rev. 08 page
Thermx PCT. High-performance Polyester. Product and Properties Guide
Thermx PCT High-performance Polyester Product and Properties Guide Thermx Chemical resistance Processability Dimensional stability Heat resistance Fast molding cycles Thermx PCT polyester is a hightemperature
Elastollan Product Range
Thermoplastic Polyurethane Elastomers (TPU) Elastollan Product Range Elastogran is Polyurethanes Contents Quality management to DIN EN ISO 9001 Page 2 Nomenclature for Elastollan Page 3 Packaging, Storage
The above data are preliminary and are subject to change as additional data are developed on subsequent lots.
Zenite LCP Product Information liquid crystal polymer resin 30% Glass Reinforced Liquid Crystal Polymer Resin PRELIMINARY DATA Zenite 7130 is a 30% glass reinforced LCP resin having excellent toughness
Antifreeze Resistant Fatigue Resistant Gasoline Resistance Automotive Under the Hood ASTM D 4066 PA012G30 ASTM D 6779 PA012G30
Vydyne R530H Nylon resins are general purpose polyamide, heat stabilized, hydrolysis resistant, 30% glass fiber reinforced resins. Available in natural and black. It is specifically designed to maximize
ULTEM* 1010 Resin. SABIC Innovative Plastics - Polyether Imide. Actions. General Information. Product Description
ULTEM* 1010 Resin SABIC Innovative Plastics - Polyether Imide Actions General Information Product Description Transparent, enhanced flow Polyetherimide (Tg 217C). ECO Conforming, UL94 V0 and 5VA listing.
Public Transportation Materials for a Moving Market
Public Transportation Materials for a Moving Market AKRO-PLASTIC GmbH Member of the Feddersen Group Weight-Reduced Products Gaining Importance for Applications in the Transportation Sector EU guidelines
Texin 245 Covestro PUR Thermoplastic Polyurethane Elastomer (Polyester) Action Saturday, October 22, 2016 Units English Legend (Open) General Information Product Description Texin 245 resin is an aromatic
QCB Thermoplastic Bearing Units
QCB Thermoplastic Bearing Units CAT TP 2017 E Ver1 NBC Group Ltd In the interest of continuing improvement, NBC Group Ltd reserves the right to modify any product or specification without prior notice.
Higher Temperature PP-Based Composite Provides Nylon/PA- Level Performance at Lower Weight and Economic Feasibility
Higher Temperature PP-Based Composite Provides Nylon/PA- Level Performance at Lower Weight and Economic Feasibility Society of Plastic Engineers Automotive Composites Conference & Exhibition September
REMA TECHNICAL INFORMATION DIN 80, 160, 320. Page 1 of 13
DIN 80, 160, 320 C O N N E C T O R D A T A S H E E T Page 1 of 13 DIN 80, 160 and 320 Connector datasheet REMA is the leading supplier of DIN-style (DIN standard 43589) quick-disconnect power connectors.
High Performance ABS Products for Automotive Applications
High Performance ABS Products for Automotive Applications ELIX Polymers is a leading manufacturer of ABS (Acrylonitrile-Butadiene-Styrene) resins and derivatives in Europe. Operating from its head office
VERONEX Cases MATERIAL PERFORMANCE CHARACTERISTICS. MECHANICAL PROPERTIES Units Test method Result. THERMAL PROPERTIES Units Test method Result
VERONEX Cases VERONEX is a breakthrough in plastic enclosure design, combining the versatility and functionality demanded by engineers, with the modern styling appreciated by their customers. The VERONEX
DELO -PUR 9692 Multi-purpose 2c polyurethane, cures at room temperature, high-viscous, filled
DELO -PUR 9692 Multi-purpose 2c polyurethane, cures at room temperature, high-viscous, filled Base - polyurethane - two-component Use - for the bonding of metal, plastic and sometimes even elastomers -
AKROMID A (PA 6.6) AKROMID B (PA 6) AKROLOY PA CompaDur PBT
P R O D U C T I N F O R M A T I O N B A S I C PR O G R A M AKROMID A (PA 6.6) AKROMID B (PA 6) AKROLOY PA PBT AKRO Engineering Plastics (Suzhou) Co., Ltd. Member of the Feddersen Group Dear AKRO-PLASTIC
Ahmedabad Textile Industry s Research Association (ATIRA), P.O. Ambawadi Vistar, Ahmedabad, Gujarat
Last Amended on - Page 1 of 13 I. TEXTILE MATERIALS 1. Fibre Micronaire Length Length uniformity Strength Elongation% Short fibre % Colour Whiteness (Rd) Colour Yellowness (+b) Neps/g Neps size SCN/g SCN
CHEZACARB. Conductive Carbon Black for Polymer Compounds SIMPLY IMPROVING EVERYDAY LIFE
CHEZACARB Carbon Black for Polymer Compounds SIMPLY IMPROVING EVERYDAY LIFE CHEZACARB AC COMPOUNDS CHEZACARB Volume resistivity as a function of CB content (extruded sheets) 1E+09 Carbon Black for Polymer
DELO-DUOPOX AD895 Multi-purpose 2c epoxy resin, cures at room temperature, medium-viscous, filled
DELO-DUOPOX AD895 Multi-purpose 2c epoxy resin, cures at room temperature, medium-viscous, filled Base - epoxy resin - two-component Use - high-strength construction adhesive - multi-purpose - the cured
Neopolen P 9230 ESD. Bulk density 1) Average Average Color 2) particle size particle weight [ kg/m 3 ] [ mm ] [ mg ]
![Neopolen P 9230 ESD. Bulk density 1) Average Average Color 2) particle size particle weight [ kg/m 3 ] [ mm ] [ mg ]](/thumbs/79/79967115.jpg "Neopolen P 9230 ESD. Bulk density 1) Average Average Color 2) particle size particle weight [ kg/m 3 ] [ mm ] [ mg ]")
= registered trademark of BASF SE Neopolen P 9230 ESD Product Description Neopolen P 9230 ESD is expanded Polypropylene supplied in the form of beads. The cells are largely closed. Table 1: Bulk density
DELO-DUOPOX AD897 Multi-purpose 2c epoxy resin, cures at room temperature, high-viscous, filled
DELO-DUOPOX AD897 Multi-purpose 2c epoxy resin, cures at room temperature, high-viscous, filled Base - epoxy resin - two-component Use - for the trowelling of welded seams - pasty and run-resistant but
EPOXY RESIN MEDIUM VOLTAGE INSULATORS
Indoor epoxy resin Raw material Aromatic epoxy resin, hardened with dicarboxylic acid anhydrides filled with silanised silica Tensile strength 79,28 /mm² ISO R 527 Flexural strength 102,45 /mm² ISO R 178
INTRODUCTION TO ENGINEERING COMPOUNDS FLAME RETARDANTS HIGH PERFORMANCE
INTRODUCTION TO ENGINEERING COMPOUNDS FLAME RETARDANTS HIGH PERFORMANCE PRODUCTS ETP, FR, HPP LATI NOMENCLATURE NATURAL & COLOURED MINERAL FILLED GLASS BEADS GLASS FIBRES CARBON FIBRES ELASTOMER MODIFIED
Challenges For Future Powerplant Coolant Systems
Challenges For Future Powerplant Coolant Systems Steven Mok, Karla Butler, Terrence Cressy, Paul Kane, Brian Fish (Presented at SPE Auto EPCON, April 28, 2009. Sterling Heights, MI) 2 Discussion Agenda
MATERIAL DATA SHEET* ALPANA d.o.o.
MATERIAL DATA SHEET* ALPANA d.o.o. Contents H-Pur Material Data Sheet... 2 LT-Pur Material Data Sheet... 3 S-Pur Material Data Sheet... 4 XH-Pur Material Data Sheet... 5 XSH-Pur Material Data Sheet...
3M TM Dyneon TM Fluoroplastics. Product Comparison Guide.
3M TM Dyneon TM Fluoroplastics Product Comparison Guide. Characteristics 3M Dyneon Fluoroplastics. Nominal values, not for specification purposes 1) Melt Index is measured at the following conditions 265
Zenite LCP Celanese LCP-009 AM 10/13
Zenite LCP 2013 Celanese LCP-009 AM 10/13 Zenite LCP Overview LCPs and Zenite LCP Zenite LCP Specific Properties Products and Roadmap UL Considerations Comparative Data 2013 Celanese LCP-009 AM 10/13 Zenite
ADVANCED MEDICAL POLYMERS FOR THE LIFE OF YOUR PROGRAM. Medical Product Portfolio
ADVANCED MEDICAL POLYMERS FOR THE LIFE OF YOUR PROGRAM Medical Product Portfolio 1 OUR MEDICAL TECHNOLOGY POLYMERS MT PORTFOLIO OFFERS DESIGN FREEDOM AND ADVANCED PERFORMANCE Offering advanced polymer
Standard Classification System for Polyamide Molding and Extrusion Materials (PA) 1
Designation: D 6779 05 Stard Classification System for Polyamide Molding Extrusion Materials (PA) 1 This stard is issued under the fixed designation D 6779; the number immediately following the designation
LAPOL HDT TECHNICAL BULLETIN
Raising the Heat Deflection Temperature of PLA LAPOL HDT TECHNICAL BULLETIN OCTOBER 2014 1 Polylactic Acid (PLA) The Front Runner in Bioplastics 100% degradable thermoplastic resin Made from renewable
Product Description PLEXIGLAS GS PLEXIGLAS XT
Product Description PLEXIGLAS GS PLEXIGLAS XT PLEXIGLAS trademark for the world s first acrylic was invented by us and first produced by the casting process in 1933. Today we manufacture PLEXIGLAS GS (=
EFFECT OF TYRE OVERLOAD AND INFLATION PRESSURE ON ROLLING LOSS & FUEL CONSUMPTION OF AUTOMOBILES CARS
EFFECT OF TYRE OVERLOAD AND INFLATION PRESSURE ON ROLLING LOSS & FUEL CONSUMPTION OF AUTOMOBILES CARS D.MADHUSUDHANA 1 C. NAGARAJA 2 PG Student Assistant Professor Dept. of Mechanical Engineering Dept.
PRODUCTS GUIDE ENGINEERING THERMOPLASTICS FLAME RETARDANT HIGH PERFORMANCE
PRODUCTS GUIDE ENGINEERING THERMOPLASTICS FLAME RETARDANT HIGH PERFORMANCE WHO IS LATI? LATI is a company founded in Italy in 1945. Since its foundation, it has been gaining a prestigious position in the
AKROMID A (PA 6.6) AKROMID B (PA 6) AKROMID C (PA 6.6/PA 6 Blend)
P R O D U C T I N F O R M A T I O N B A S I C P R O G R A M AKROMID A (PA 6.6) AKROMID B (PA 6) AKROMID C (PA 6.6/PA 6 Blend) AKRO-PLASTIC GmbH Member of the Feddersen Group Dear AKRO-PLASTIC customers,
POLYETHYLENE High Density
POLYETHYLENE High Density PE-3408/PE-3608 ENGINEERED FOR WATER AND MINING PIPING SYSTEMS PLASTIC MANUFACTURES SINCE 1953 POLYTUBES HIGH MOLECULAR WEIGHT (HMW) High Density Polyethylene Pipe for General
Geomembrane Test Methods
Appendix 2 Geomembrane Test Methods AMERICAN SOCIETY FOR TESTING AND MATERIALS (arranged by number) ASTM D-5 ASTM D-36 ASTM D-256 ASTM D-412 ASTM D-413 ASTM D-471 ASTM D-570 ASTM D-638 ASTM D-696 ASTM
PE-HDXc pipes (physically cross-linked polyethylene pipes)
pipes (physically cross-linked polyethylene pipes) Applications: Domestic drinking water installations, radiator connections and surface regulation Special properties high chemical resistance (according
CABELEC Conductive Compounds Product Selection Guide
Conductive Compounds CABELEC Conductive Compounds Product Selection Guide CABELEC Conductive Compounds Product SELECTION Guide Cabot s Performance Materials: Over 130 Years of Getting You Where You Want
ROLLER LUBRICANT VISCOSITY RATING
CHAIN INFORMATION OUTER PLATE OUTER PLATE PIN 2 PIECES OF EACH MAKE AN OUTER LINK BUSH INNER PLATE INNER PLATE 2 PIECES OF EACH MAKE AN INNER LINK ROLLER AMERICAN BRITISH Lubrication (Dependent on power
Contents. Product Portfolio 03. Product 04. Product Selection Guide 12. Integrated Solution 21. At a Glance 22. Global Network 23
Enjoy Our Excellence & Expertise ABS, ABS Alloy, ASA Contents Product Portfolio 03 Exclusive Product 04 Product Selection Guide 12 Integrated Solution 21 At a Glance 22 Global Network 23 Expertise Excellent
Components: Dimensions / Order Codes Clamp Body. * 1st part of STAUFF Group 4. * Exact outside diameters Ø D1 / Ø D2 (mm) Clamp Body.
Components: Dimensions / Order Codes Clamp Body Clamp Body Colour: Green Material code: PP 4 PP One clamp body is consisting of two clamp halves. 1st part of STAUFF 4 Exact outside diameters Ø D1 / Ø D2
The joint product portfolio of MOL Petrochemicals and Slovnaft provides infinite opportunities
DESCRIPTION TIPELIN 2100J is a high density unimodal polyethylene copolymer (with propene-1 as comonomer) intended for injection moulding of general purpose products. It offers good balance of properties
Dimensions / Order Codes
U-Bolt Clamps Dimensions / Flat Steel U-Bolt with Plastic Pipe Saddle (Short) and U-Profile Type FB+RUK (To be used as Fixed Point Clamps only) B1 ø D1 H4 H2 H3 H1 L2 L1 B2 Flat Steel U-Bolt (type FB)
Wiring Duct T1 Series - Slotted
Duct T1 Series - Slotted UL file E123572 T1 Series Gray Open Slot Rigid PVC (including cover) Catalog Standard Carton Package Quantity Price Catalog Single Piece Pkg Package Quantity Price T1-0506G 20
Neopolen. Contents. 1. Product 1.1 Description 1.2 Forms supplied 1.3 Delivery, Conveying, Storage
= registered trademark of BASF SE General Technical Information Neopolen Contents 1. Product 1.1 Description 1.2 Forms supplied 1.3 Delivery, Conveying, Storage 2. Processing 2.1 Filling the mold cavity
UL PERFORMANCE MATERIALS. UL Thermoplastics Testing Center (UL TTC) UL TTC SERVICE SPECIFICATIONS
UL PERFORMANCE MATERIALS UL Thermoplastics Testing Center (UL TTC) UL TTC SERVICE SPECIFICATIONS ADVANCED TECHNOLOGY AND EXTENSIVE CAPABILITIES FOR SPEED TO MARKET The UL Thermoplastics Testing Center
DELO -PUR 9691 Multi-purpose 2c polyurethane, cures at room temperature, medium-viscous, filled
DELO -PUR 9691 Multi-purpose 2c polyurethane, cures at room temperature, medium-viscous, filled Base - polyurethane - two-component Use - for the bonding of metal, plastic and sometimes even elastomers
S R O T A L SU IN INSULATORS
INSULATORS INSULATORS LV INSULATORS & MV BUSHINGS BMC & SMC MOULDED PARTS CONTENTS 03 04 05 LV Insulators Material Data LV Insulators Type SK Color: Red LV Insulators Type SK 06 07 08 09 10 11 LV Insulators
Fusion Equipment & Tools Electrofusion Processor Scraper Tools Rerounding Tools Socket Fusion Kit
Fusion Equipment & Tools Electrofusion Processor Scraper Tools Rerounding Tools Socket Fusion Kit 71 I Fuse 105 Electrofusion Processor The IntegriFuse I Fuse 105 Electrofusion Processor is the next generation
Dinosaur Flexible Wiring Duct
Dinosaur Flexible Wiring Duct Dinosaur self-adhesive flexible duct is ideal for transporting wiring to cabinet doors from control panel interiors (for that part of the cable run that leans against the
CONDUCTIVE COMPOUNDS. CABELEC Conductive Compounds Product Selection Guide
CONDUCTIVE COMPOUNDS CABELEC Conductive Compounds Product Selection Guide Cabot s Performance Materials: Over 130 Years of Getting You Where You Want to Go Cabot Corporation is a global performance materials
SUPREME. Catalogue 2016/18 NEW. Fasteners and Components EXPANDED MATERIAL RANGE BLACK MOULDED SHOULDER WASHERS
NEW BLACK MOULDED SHOULDER WASHERS SUPREME Fasteners and Components Australia s Leading Supplier of High Quality Plastic Fasteners and Components Catalogue 2016/18 EXPANDED MATERIAL RANGE Natural Nylon
Electronic Materials Brochure
Electronic Materials Brochure TABLE OF CONTENTS 3 Introduction to Materials 4 ISODAMP C-8000 Materials 6 ISOLOSS SL Molding Materials - Thermosets 8 CONFOR EG Foams CONFOR SC Foams ISODAMP C-8000 MATERIALS
Tel +44 (0) Fax +44 (0)
Tel +44 (0)1235 815816 Fax +44 (0)1235 811234 E-mail oilite@bowman.co.uk Contents Page Company Profile 1-2 ISO Certificate 2 Product Pictures 3 Wrapped Bearings Technical Information 4 Wrapped Bearings
DETAIL SPECIFICATION SHEET INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, POLYOLEFIN, FLEXIBLE, CROSSLINKED
INCH-POUND MIL-DTL-23053/5C 17 June 1996 SUPERSEDING MIL-I-23053/5B 01 May 1986 DETAIL SPECIFICATION SHEET INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, POLYOLEFIN, FLEXIBLE, CROSSLINKED This specification
Components: Dimensions / Order Codes
Light Series LB Components: Dimensions / Order Codes Clamp Body Single Design ø D 2 B ø D 3 H S ø D 1 L2 L3 Order Codes Clamp Body Standard Materials Polypropylene Colour: Black Material code: PP Polyamide
Hello, I am Paul Kane, the Americas leader for DuPont engineering plastics development activities in vehicle electrification systems.
DuPont Automotive Performance Materials to Help Electrify Vehicles DuPont Automotive Webcast hosted by SAE International Oct. 21, 2009 Hitoshi Shioya DuPont Automotive Global Electrical & Electronic Applications
Components: Dimensions / Order Codes. Clamp Body * *1*06*PP * * * * Clamp Body. ød2. Pipe / Tube / Hose Bore (1 Clamp Body)
ød Components: Dimensions / Order Codes Clamp Body ød B H L L L Clamp Body Colour: Green Material code: PP Colour: Black Material code: PA See page A88 for material properties and technical information.
Advanced Materials. Raising insulation performance in car electronics
Raising insulation performance in car electronics Quarter 2, 2013 Table of contents Raising performance Ignition coils Reliability and protection for electronic devices Improved endurance for ignition
The HELIXGUARD management looks back at over 3 decades of experience in Worldwide Application oriented Hydraulic industries.
HELI I GUARDG WELCOME TO HELIXGUARD The HELIXGUARD management looks back at over 3 decades of experience in Worldwide Application oriented Hydraulic industries. Recognizing and understanding the importance
PROVIDING ACCURATE DATA IN A TIMELY MANNER
PROVIDING ACCURATE DATA IN A TIMELY MANNER 248 Hughes Lane St. Charles MO 63301 Ph. (636) 949-5835 Fax (636) 723-5835 www.elteklabs.com MATERIAL PROPERTIES LAB TRACKING TESTS TEST METHOD UL 746-A Section
Weldalloy Catalogue 1
Weldalloy Catalogue 1 ONTE Contents P Pig s Tail Protective Wrapping........ 3 Pig s Tail Data Sheet.............. 4 Fire Resistant Anti Static Pig s Tail..... 6 Electrical Guard................... 7 Tidy
ADVANCE System ADVANCE SYSTEM IP66 MODULAR SYSTEM FOR COMBINATION UNITS VERSIONS MODULE 136 MODULE 106. t. 56. Without protective devices
ADVANCE System ADVANCE SYSTEM IP66 MODULAR SYSTEM FOR COMBINATION UNITS Without protective devices Interlocked-switch socket outlets QUADRA Series socket outlets For 16 and 32 A currents Protection degree
Spaceloft Insulation TECHNICAL GUIDE
(Click below to jump to sections.) Contents Introduction 3 Non-Combustibility and Fire Performance 4 EN 13501-1 Reaction to Fire Classification (Bodycote, Warrington Fire) ASTM E 84 Surface Burning Characteristics
NEW APPLICATION TECHNOLOGIES IN PHENOLIC MOLDABLE COMPOSITES
NEW APPLICATION TECHNOLOGIES IN PHENOLIC MOLDABLE COMPOSITES 1. Why PF-GF have an increasing share of new engine components Plastics are replacing metal parts for a wide range of uses in the automotive
Product Datasheet. 2. GRP large rain canopy. 3. GRP door. 4. G.I Mounting plate. 5. G.I Gland plate. 6. EPDM rubber gasket
POLYESTER ENCLOSURE SINGLE DOOR Product Datasheet GRP Single Door Enclosures are used for outdoor application with weatherproof and antistatic properties, finding their major application in the protection
GASKETS. From compound asbestos free and PTFE sheets, our sealing solutions. INDEX OF GASKETS
GASKETS From compound asbestos free and PTFE sheets, our sealing solutions. COMPRESSED SYNTHETIC FIBRE JOINTING SHEETS Seal X offers a number of asbestos free synthetic fibre jointing sheets designed for
Surface Protective Systems
Surface Protective Systems Technical information Oxydur UP 410 Laminate TI 216 Laminate system for concrete and steel substrates Base Polyester resin, unsaturated Material Group Membranes Tank- / vessel
Product Datasheet. Cable TV Junction Box (Page 4)
JUNCTION BOX Product Datasheet Junction Box Bolted Type (Page 2) Cable TV Box (Page ) Cable TV Junction Box (Page 4) Telephone Box (Page 5) Telephone Junction Box (Page 6) GRP Junction Box Enclosures are
Weldalloy Catalogue 1
Weldalloy Catalogue 1 ONTE Contents p Pig s Tail Protective Wrapping........ 3 Pig s Tail Data Sheet.............. 4 Fire Resistant Anti Static Pig s Tail..... 6 Electrical Guard................... 7 Tidy
TKD SERIES 3-WAY BALL VALVES - TRUE UNION
TKD SERIES 3-WAY BALL VALVES - TRUE UNION The TKD offers a host of advanced features that set it apart from other multi-port valves. The patented seat stop carrier allows for in-line micro-adjustment of
Epoxy Resin L Unit Value
Technical data Epoxy Resin L + Hardener S, L, CL, EPH 500, W 300, GL 1, GL 2, EPH 573 and EPH 161 Low viscosity, free of solvents and fillers Fast impregnation of glass, aramid, and carbon fibres High
K-Resin SB Copolymer/Crystal Polystyrene Sheet Property Modification with High Impact Polystyrene
Styrene-Butadiene Copolymers Plastics Technical Center Report #9 K-Resin SB Copolymer/Crystal Polystyrene Sheet Property Modification with High Impact Polystyrene INTRODUCTION. Many sheet extruders are
Paint Resin in Thermoplastics Properties and Applications
Paint Resin in Thermoplastics Properties and Applications Jennifer Lynch EPA Seminar Technology Review and Demonstration of Paint Resin Reclamation Technology for Use in Thermoplastics June 12, 2008 Overview
Surface Protective Systems
Surface Protective Systems Technical information Oxydur VEL-SR Mechanical applied electrically conductive laminate system Base Vinyl ester resin Material Group Membranes Tank- / vessel linings - laminates
DRISCOPIPE 8100 HDPE PIPE and FITTINGS DATA SHEET
PerfmancePipe.com DRISCOPIPE 8100 HDPE PIPE and FITTINGS DATA SHEET Driscopipe 8100 Pipe and Fittings meet exceed: Driscopipe 8100 Pipe and Fittings f: ASTM D2513, D2683, D3261 ASTM D3350, cell classification
Halogen Free, Flame-retardant Polyether based TPU
STANDARD COLORS CMX Cable Markers Halogen Free, Flame-retardant Polyether based TPU TECHNICAL DATA SHEET Revision Number. 1 Last Edited 11. marts 2019 OTHER COLORS MATERIAL halogen free, flame retarded
Zurcon U-Cup RU /*"-8#+-8 " (&*$8 " %*+(+$4
Zurcon U-Cup RU9 Your Partner for Sealing Technology Trelleborg Sealing Solutions is a major international sealing force, uniquely placed to offer dedicated design and development from our market-leading
Inspiring design innovation
IROGRAN Thermoplastic Polyurethanes Inspiring design innovation Product Overview IROGRAN TPU: Inspiring design innovation The manufacture of modern products, engineering components and technical parts
ENERGY. Solar Cables
ENERGY Solar Cables Contents TECSUN(PV) PV1-F Cables for Photovoltaics 3 Technical Data 4 Design Features 6 Selection and Ordering Data 6 TECSUN DUO (PV) Cables for Photovoltaics 7 Technical Data 8 Design
YELLOWSTRIPE 8300 BIMODAL HDPE PIPE DATA SHEET
PerformancePipe.com YELLOWSTRIPE 8300 BIMODAL HDPE PIPE DATA SHEET Yellowstripe 8300 Pipe meets or exceeds: ASTM D2513 CAN/CSA-B137.4 UPC ASTM D3350, cell classification PE445574C and PE445576C PPI TR-4
Such as scratching, scoring, excessive packing wear, stuffing box damage... Have you ever wondered if there was any way to guide a polished rod?
Have you heard of or had problems with polished rod damage? Such as scratching, scoring, excessive packing wear, stuffing box damage... Have you ever wondered if there was any way to guide a polished rod?
Ty-Duct wiring duct. Product and ordering information. Technical information. Ty-Duct wiring duct 1
TY-DUCT WIRING DUCT Ty-Duct wiring duct Product and ordering information A Technical information Ty-Duct wiring duct 1 Overview The versatile configurations you need for routing and concealing wiring.
CEAST - HDT & VICAT. Thermal Testing Instruments
CEAST - HDT & VICAT Thermal Testing Instruments HDT/VICAT TESTING Thermal Testing on Plastics Why? To characterize the material at high temperatures HDT Test Vicat Test 2 HDT/VICAT TESTING Vicat standards
CATALOG. Ty-Duct Wiring duct
CATALOG Ty-Duct Wiring duct Thomas & Betts is now ABB Installation Products, but our long legacy of quality products and innovation remains the same. From connectors that help wire buildings on Earth to
CONDUCTIVE COMPOUND AND CONCENTRATES CABELEC CONDUCTIVE COMPOUNDS AND CONCENTRATES PRODUCT SELECTION GUIDE
CONDUCTIVE COMPOUND AND CONCENTRATES CABELEC CONDUCTIVE COMPOUNDS AND CONCENTRATES PRODUCT SELECTION GUIDE Performance and leadership in black plastics Cabot Corporation is a global performance materials
MIRTA-KONTROL d.o.o. LABORATORY DEPARTMENT
Textiles 1) Fibre composition - Qualitative analysis (Internal MK method) 2) Fibre composition - Binary fibre mixtures (EN ISO 1833-series) 3) Fibre composition - Ternary fibre mixtures (EN ISO 1833-2)
+GF+ CLASS 267. Factory Mutual Approved. HDPE Pipe & Pipe Fittings GEORG FISCHER PIPING SYSTEMS centralplastics.
Factory Mutual Approved CLASS 26 HDPE Pipe & Pipe Fittings CENTRAL PLASTICS 8.499.692 Table Of Contents 18-1 Design-Flow HDPE IPS HDPE Pipe (Iron Pipe ) 4-24 18-2 PE 368 HDPE Physical Properties - FM 18-3
GIACOGREEN Pipes and Fittings in Polypropylene Random
GIACOGREEN Pipes and Fittings in Polypropylene Random GIACOMINI s.p.a. 28017 S.Maurizio d Opaglio (Novara) Tel. 0322-923111 Fax 0322-96256 Telex 200035 www.giacomini.com dal 1951 January 2000 GIACOMINI,
AR-GLAS. Tubing and Rod of Special Glass
Tubing and Rod of Special Glass SCHOTT is a leading international technology group in the areas of specialty glass and glass-ceramics. With more than 130 years of outstanding development, materials and
ATEVA MEDICAL EVA POLYMERS UNIQUE SOLUTIONS FOR YOU
ATEVA MEDICAL EVA POLYMERS UNIQUE SOLUTIONS FOR YOU WHAT IS ATEVA MEDICAL? Ateva Medical EVA-based resins deliver the reliable performance required for medical applications. Celanese can help companies
Serving the Chemical Industry
Serving the Chemical Industry Hello, I am delighted to introduce you to S. G. & P., Inc. This company is a family owned corporation founded in 1968 by my father, Rex Epps. Upon retiring as a scientific
Table of contents. 1. Overview Product ordering and information Appendix Wiring duct styles 4. 1.
Ty-Duct Wiring Duct 1 Table of contents 1. Overview 2 1.1 Wiring duct styles 4 1.2 How to order 5 2. Product ordering and information 7 2.1 Solid wall wiring duct 8 2.2 Wide slot wiring duct 10 2.3 Narrow
Compostable Solutions for Packaging. FlexPackCon 2016 Randy Jester
Compostable Solutions for Packaging FlexPackCon 2016 Randy Jester 10/14/2016 1 Overview Film structural polymers ecovio aliphatic-aromatic polyester / PLA blend ecoflex aliphatic-aromatic polyester Packaging