MIRTA-KONTROL d.o.o. LABORATORY DEPARTMENT
|
|
- Megan Hardy
- 5 years ago
- Views:
Transcription
1 Textiles 1) Fibre composition - Qualitative analysis (Internal MK method) 2) Fibre composition - Binary fibre mixtures (EN ISO 1833-series) 3) Fibre composition - Ternary fibre mixtures (EN ISO ) 4) Fibre composition - DuPont method for Nomex fibre (Internal DuPont method) 5) Linear density from packages (skein method) (EN ISO 2060) 6) Linear density of yarn removed from fabric (ISO ) 7) Determination of fibre diameter (ISO 137) 8) Determination of twist in yarns - Direct counting method (EN ISO 2061) 9) Determination of twist in yarns - Untwist / re-twist method (ISO 17202) 10) Determination of twist in yarns removed from fabric (ISO ) 11) Mass per unit length and mass per unit area (ISO 3801) 12) Mass per unit area using small samples of fabric (EN 12127) 13) Mass per unit area of nonwovens (EN , ISO ) 14) Mass per unit area of rubber or plastics coated fabrics (EN ISO ) 15) Number of threads per unit length of woven fabric (EN , ISO ) 16) Number of stitches per unit length and unit area of knitted fabric (EN 14971) 17) Dimensional change in domestic washing and drying (EN ISO 3759, EN ISO 5077, EN ISO 6330) 18) Dimensional change of fabrics induced by cold-water immersion (EN ISO 3759, ISO 7771) 19) Tensile strength and breaking elongation fabric - Strip method (EN ISO ) 20) Tensile strength and breaking elongation fabric - Grab method (EN ISO ) 21) Tensile strength and breaking elongation of yarn (EN ISO 2062) 22) Tensile strength and elongation of nonwovens (EN , ISO ) 23) Tensile strength and elongation at break of rubber or plastics coated fabrics (EN ISO 1421) 24) Determination of maximum force to seam rupture - Strip method (EN ISO ) 25) Determination of maximum force to seam rupture - Grab method (EN ISO ) 26) Tensile breaking force and elongation of glass fabric (ISO 4606) 27) Tear properties of fabrics - Single tear method (trouser-shaped) (EN ISO ) 28) Tear properties of fabrics - Single tear method (wing-shaped) (EN ISO ) 29) Tear properties of fabrics - Double tear test (tongue-shaped) (EN ISO ) 30) Tear resistance of nonwovens (EN ISO ) 31) Tear resistance by constant rate of tear of rubber or plastics coated fabrics (EN ISO ) 32) Abrasion resistance of fabrics - Specimen breakdown (EN ISO ) 33) Abrasion resistance of fabrics - Mass loss (EN ISO ) 34) Abrasion resistance of fabrics - Assessment of appearance change (EN ISO ) 35) Abrasion resistance of rubber or plastics coated fabrics (EN ISO ) 36) Surface fuzzing and pilling by modified Martindale method (EN ISO ) 37) Surface fuzzing and pilling by piling box method (EN ISO ) 38) Crease recovery angle (EN 22313, ISO 2313) 39) Resistance to surface wetting - Spray test (EN ISO 4920) 40) Resistance to water penetration - Hydrostatic pressure test (EN 20811, ISO 811) 41) Oil repellency (EN ISO 14419) 42) Colour fastness, general (EN ISO 105-A01, EN A02, ISO 105-A02, EN A03, ISO 105-A03) 43) Colour fastness to domestic and commercial laundering (EN ISO 105-C06) 44) Colour fastness to washing with soap and soda (EN ISO 105-C10) 45) Colour fastness to dry cleaning (EN ISO 105-D01) 46) Colour fastness to water (EN ISO 105-E01) 47) Colour fastness to sea water (EN ISO 105-E02) 48) Colour fastness to chlorinated water (EN ISO 105-E03) MK Test methods rev /5
2 49) Colour fastness to perspiration (EN ISO 105-E04) 50) Colour fastness to spotting - Water (EN ISO 105-E07) 51) Colour fastness to hot pressing (EN ISO 105-X11) 52) Colour fastness to rubbing (EN ISO 105-X12) 53) Colour fastness to bleaching - Hypochlorite (EN N01, ISO 105-N01) 54) Colour fastness to rubbing - Organic solvents (EN ISO 105-D02) 55) Colour fastness to artificial light (EN ISO 105-B02) 56) ph of aqueous extract (EN ISO 3071) 57) Thickness of textiles and textile products (EN ISO 5084) 58) Thickness of nonwovens (EN ISO ) 59) Air permeability (EN ISO 9237) 60) Width and length of fabrics (EN 1773, ISO 3932, ISO 3933) 61) Ignition of vertically oriented specimens (EN ISO 6940) 62) Flame spread properties of vertically oriented specimens (EN ISO 6941) 63) Detection of the use of certain azo colorants accessible with or without extraction (EN ) 64) Bursting properties (EN ISO ) 65) Slippage resistance - Fixed seam opening method (EN ISO ) 66) Slippage resistance - Fixed load method (EN ISO ) 67) Colorimetry (EN ISO 105-J01, EN ISO 105-J02, EN ISO 105-J03) 68) Spirality after laundering (ISO ) 69) Coating adhesion (EN ISO 2411) 70) Formaldehyde content (EN ISO ) 71) Glass fabrics - Loss on ignition (ISO 1887) Leather 72) Thickness (EN ISO 2589) 73) Tensile strength and elongation (EN ISO 3376) 74) Tear load - Single edge tear (EN ISO ) 75) Tear load - Double edge tear (EN ISO ) 76) Free fatty content (EN ISO 4048) 77) Flex resistance by flexometer method (EN ISO ) 78) ph value (EN ISO 4045) 79) Temperature shrinkage in water (until 100 C) (HRN G.S2.039) 80) Moisture and ash content (HRN G.S2.010) 81) Sulphate content in the ash (EN ISO 4047) 82) Water vapour permeability (EN ISO 14268) 83) Water vapour absorption (EN ISO 17229) 84) Water penetration and absorption (EN ISO ) 85) Static water absorption (Kubelka) (EN ISO 2417) 86) Colour fastness to rubbing (EN ISO 11640) 87) Colour fastness to perspiration (EN ISO 11641) 88) Colour fastness to water (EN ISO 11642) 89) Chromium (VI) content (EN ISO 17075) 90) Azo colorants (EN ISO ) 91) Colour fastness to water spotting (EN ISO 15700) 92) Resistance to grain cracking (EN ISO 3378) 93) Water resistance of heavy leathers (EN ISO 5404) MK Test methods rev /5
3 Geosynthetics - Geotextiles 94) Thickness (EN ISO ) 95) Mass per unit area (EN ISO 9864) 96) Tensile strength (EN ISO 10319) Protective gloves 97) Innocuousness - ph value (EN 420, c.4.3.2) 98) Innocuousness - Chromium (VI) content (EN 420, c.4.3.3) 99) Glove size (EN 420, c.6.1) 100) Glove dexterity (EN 420, c.6.2) 101) Water vapour transmission (EN 420, c.6.3) 102) Water vapour absorption (EN 420, c.6.4) 103) Abrasion resistance (EN 388, c.6.1) 104) Cut resistance (EN 388, c.6.2) 105) Tear resistance (EN 388, c.6.3) 106) Puncture resistance (EN 388, c.6.4) 107) Burning behaviour (EN 407, c.6.3) 108) Radiant heat (EN 407, c.6.6) 109) Time needed for removing gloves (EN 659, c.3.15) 110) Whole glove integrity test (water leakage) (ISO 15383, Annex A) 111) Chain-saw cut resistance (EN 381-4; EN 381-7) Protective clothing 112) Burning behaviour - Limited flame spread (EN ISO 15025) 113) Burning behaviour - Limited flame spread index (EN ISO 14116) 114) Electrostatic properties - Surface resistivity (EN ) 115) Electrostatic properties - Electrical resistance through material (EN ) 116) Puncture resistance (EN 863) 117) Abrasion resistance (EN 530) 118) Chain-saw cut resistance - leg protectors (EN 381-2; EN 381-5) 119) Chain-saw cut resistance - gaiters (EN 381-8; EN 381-9) 120) Chain-saw cut resistance - upper body protectors (EN ; EN ) 121) Area of visible material (EN ISO 20471) 122) Ergonomic principles (EN 13921) 123) Size designation of clothes (EN / ISO 3635; EN ; EN ) 124) Convective heat resistance (ISO 17493) 125) Resistance of materials to penetration by liquids (EN ISO 6530) 126) One surface exposure to fuel oil (EN 343, c.4.2; c ) 127) Chromaticity and luminance factor (EN ISO 20471, c.7.2) 128) Radiant heat (EN ISO 6942) 129) Convective heat (flame heat transmission) (EN 367; ISO 9151) Protective footwear 130) Ergonomic features (EN ISO 20344, c.5.1) 131) Upper / outsole and sole interlayer bond strength (EN ISO 20344, c.5.2) 132) Internal toecap length (EN ISO 20344, c.5.3) 133) Toecap impact resistance (EN ISO 20344, c.5.4) 134) Toecap compression resistance (EN ISO 20344, c.5.5) 135) Corrosion of metallic toecap and inserts (EN ISO 20344, c.5.6) MK Test methods rev /5
4 136) Leakproofness (EN ISO 20344, c.5.7) 137) Dimensional conformity of inserts (EN ISO 20344, c.5.8.1) 138) Penetration resistance of the sole (EN ISO 20344, c.5.8.2) 139) Electrical resistance (EN ISO 20344, c.5.10) 140) Footwear slip resistance (EN ISO 20344, c.5.11; EN ISO 13287) 141) Insulation against heat (Heat resistance) (EN ISO 20344, c.5.12) 142) Insulation against cold (Cold resistance) (EN ISO 20344, c.5.13) 143) Energy absorption of seat region (EN ISO 20344, c.5.14) 144) Resistance to water for whole footwear (EN ISO 20344, c ) 145) Thickness of upper (EN ISO 20344, c.6.1) 146) Height of the upper (EN ISO 20344, c.6.2) 147) Determination of tear strength of the upper, lining and/or tongue (EN ISO 20344, c.6.3) 148) Tear strength of uppers, linings and insocks (EN 13571) 149) Tensile properties of upper material (EN ISO 20344, c.6.4) 150) Flexing resistance of rubber upper (EN ISO 20344, c.6.5.2) 151) Resistance to cut growth (Ross flexing test) (ISO 4643, Annex C; ISO 5423, Annex C) 152) Water vapour permeability (EN ISO 20344, c.6.6; EN 13515) 153) Water vapour absorption (EN ISO 20344, c.6.7; EN 13515) 154) Water vapour coefficient (EN ISO 20344, c.6.8) 155) Innocuousness (ph) (EN ISO 20344, c.6.9) 156) Innocuousness (Chromium (VI)) (EN ISO 20344, c. 6.11) 157) Abrasion resistance of lining and insock (EN ISO 20344, c.6.12, EN 13520) 158) Water penetration and water absorption for upper (EN ISO 20344, c.6.13) 159) Resistance of upper to cutting (EN ISO 20344, c.6.14) 160) Insole thickness (EN ISO 20344, c.7.1) 161) Water penetration and water absorption insole (dynamic) (EN ISO 20344, c.7.2; EN 12746) 162) Water penetration and water absorption insole (static) (EN 12746) 163) Abrasion resistance of insole (EN ISO 20344, c.7.3; EN 12747) 164) Outsole thickness (EN ISO 20344, c.8.1) 165) Tear strength of outsole (EN ISO 20344, c.8.2; EN 12771) 166) Outsole abrasion resistance (EN ISO 20344, c.8.3; EN 12770) 167) Flexing resistance of outsole (EN ISO 20344, c.8.4; EN ISO 17707) 168) Resistance to hydrolysis of outsole (EN ISO 20344, c.8.5) 169) Resistance to fuel oil (EN ISO 20344, c.8.6.1) 170) Outsole dimensions for firefighters footwear (EN 15090:2007, c.6.7) 171) Radiant heat resistance of firefighters footwear upper (EN 15090, c.7.2) 172) Burning behaviour of firefighters footwear (EN 15090, c.7.3) 173) Chain-saw resistance (EN ISO 17249, c ; EN 381-3) Rubber 174) Density (ISO 2781) 175) Abrasion resistance (ISO 4649) 176) Indentation hardness, Shore A (ISO ) 177) Thickness (ISO 23529) 178) Tensile properties (ISO 37) Products for building applications 179) Mechanical properties of glass fibre meshes (EN 13496) 180) Burning behaviour (for class B2) (DIN , c.6.2) MK Test methods rev /5
5 Other 181) Furniture - Assessment of the ignitability of upholstered furniture by smouldering cigarette (EN ) 182) Furniture - Assessment of the ignitability of upholstered furniture by match flame equivalent (EN ) 183) Furniture - Assessment of the ignitability of bedding items by smouldering cigarette (EN ISO ) 184) Furniture - Assessment of the ignitability of bedding items by match flame equivalent (EN ISO ) 185) Toys - Mechanical and physical properties (EN 71-1) 186) Toys - Flammability (EN 71-2) 187) Zippers - Types and dimensions of zippers (DIN 3417, DIN 3418) 188) Zippers - Mechanical properties of zippers (DIN , c.6.2.3) 189) Plastics - Tensile properties (EN ISO 527-1) 190) Plastics - Tear resistance - Single tear method (trouser-shaped) (EN ISO ) 191) Plastics - Tensile properties of security seals (Internal MK method) 192) Buoyant aids - Integrity of the entire assembly (EN ISO , Annex G) 193) Buoyant aids - Resistance of markings to saliva (EN ISO , Annex A) 194) Buoyant aids - Residual buoyancy (EN ISO , Annex A; EN ISO ) 195) Burning behaviour of interior materials for vehicles (ISO 3795) MK Test methods rev /5
Services Directory updated: January 2016
Kulmbacher Straße 76 95213 Münchberg Tel. 09281/409-8720 Fax 09281/409-8799 E-mail: pruefamt@hof-university.de Director: Prof. Oliver Lottes Services Directory updated: January 2016 A) Mechanical and Technological
More informationAhmedabad Textile Industry s Research Association (ATIRA), P.O. Ambawadi Vistar, Ahmedabad, Gujarat
Last Amended on - Page 1 of 13 I. TEXTILE MATERIALS 1. Fibre Micronaire Length Length uniformity Strength Elongation% Short fibre % Colour Whiteness (Rd) Colour Yellowness (+b) Neps/g Neps size SCN/g SCN
More informationName of Laboratory : SGS CAMBODIA LABORATORY Accreditation Number : Testing : 1076 A-C, Street 371, Sangkat Stung Meanchey, Khan Meanchey,
Name of Laboratory Contact Person : Mr. Sopheak Chea Phone : + 855 23 967 888 Fax : - Email : Sopheak.Chea@sgs.com 1 Textiles - Colour fastness to light : ISO 105-B02 : 2014 Xenon-Arc BS EN ISO 105-B02
More informationSTS Directory Accreditation number: STS 0228
International standard: ISO/IEC 17025:2005 Swiss standard: SN EN ISO/IEC 17025:2005 TESTEX AG Schweizer Textilprüfinstitut Gotthardstrasse 61 CH-8027 Zürich Head: Responsible for MS: Dr. Jean-Pierre Haug
More informationD-LAB Specifications. Your Partner for textile testing and quality assurance
D-LAB Specifications Your Partner for textile ing and quality assurance D-LAB is your neutral partner for reliable quality management and evaluation in all textile areas. Producers of home textiles, furnishing
More information11 BS 4468 ; Withdrawn and replaced by BS En : 1994, ISO 1974 : 1990( 2012). Determination of tearing resistance ( Elmendorf method )
S No Standrads Name 1 ASTM SEC 7 - Textiles 2 ASTM SEC 8 - Plastics 3 ASTM SEC 9 - Rubber 4 ASTM SEC 10 - Electrical Insulation and Electronics 5 ASTM SEC 4 VOL 04.04:2013 (construction: volume 04.04:Roofing
More informationAccreditation Scope of Consumer & Retail Services Laboratory, Karachi, Pakistan
All Textile MaterialsProduct F-0602 Issue : 100815 Testing Laboratory. Accreditation Scope of Consumer & Retail Services Laboratory, Karachi, Pakistan Permanent laboratory premises H- 33, Korangi Industrial
More informationMITRAS MATERIALS GMBH
MITRAS MATERIALS GMBH Friedrich-Ochs-Str. 2 92637 Weiden/Opf. Tel.: 0961 / 89-810 / 89-812 Fax: 0961 / 89-672 Directory of services L a b o r a t o r y MITRAS MATERIALS GMBH Edition 02/18 Rev. 08 page
More informationAccreditation No: LAB 007. SGS Consumer & Retail Services - Laboratory H-3/3, Sector 5, Korangi Industrial Area, Karachi 74900, Pakistan.
F-0602 Issue : 100815 Accreditation No: Awarded to SGS Consumer & Retail Services - Laboratory H-33, Sector 5, Korangi Industrial Area, Karachi 74900, Pakistan. The scope of accreditation is in accordance
More informationTESTING SERVICES OFFERED BY ATIRA TEXTILE & CHEMICAL TEXTILE TESTING LABORATORIES
TESTING SERVICES OFFERED BY ATIRA TEXTILE & CHEMICAL TEXTILE TESTING LABORATORIES Ahmedabad Textile Industry s Research Association P.O. Ambawadi Vistar, Ahmedabad- 380 015 Phones : 91-79-26307921-7922-7923,
More informationNZWTA TEXTILE TESTING Price List Valid from 01 July 2017
NZWTA TEXTILE TESTING Price List Valid from 01 July 2017 Carpet Tests Test Method Minimum Sample Size ACCS Full Test Package (6 tests) 1 x 1.5 m, 6 tiles $734.00 Castor Chair Test ISO TR 4918, BS DIN EN
More informationLaboratory Reliable Analytical Laboratories Private Limited, Reliable House, 125 Indian Corpn Complex, Mankoli, Bhivandi, Thane, Maharashtra
Last Amended on - Page 1 of 7 I. PLASTICS, RUBBER AND LEATHER 1. Container for Packing of Natural Mineral Water and Packaged Drinking Water (Cups, glasses, bottles & Jars) Design, Shape and dimension IS
More informationUL S EXPEDITED COMPLIANCE SERVICES APPAREL
APPAREL APPAREL (1 COLOR / 1SIZE) Tier 1 - Regulatory - All $150 $90 Flammability General Wearing Apparel 16 CFR 1610 Flammability - Vinyl 16 CFR 1611 Care Labeling 16 CFR 423, ASTM D 3136, ASTM D 5489
More informationAUTOMOTIVE TESTS. BMW AUTOMOTIVE Pile Yarn Thickness $ 25.00
AUTOMOTIVE TESTS BMW AUTOMOTIVE3.2.4.2 Pile Yarn Thickness $ 25.00 BMW 3.2.10 Imprint Behavior Without Foam Impression Depth @ 60 Minutes and 24 hours (DIN 54316/EN20 105 A02) $ 75.00 BMW 3.2.10.2 Tested
More informationSGS India Private Limited, Consumer Testing Services-Laboratory, No. 134, 2 nd Floor, Sivashakthi Nagar, College Road, Tirupur, Tamil Nadu
Last Amended on 03.12.2015 Page 1 of 7 I. TEXTILE MATERIALS 1. Yarn) Linear Density SO-IN-CTS-C02-QU-001 (Version 3.2) ASTM D1907/D1907 M-12 ASTM D 1059: 2001 ISO 7211-5: 1984 BS ISO 7211-5: 1984 ISO 2060:
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CONSUMER TESTING LABORATORIES, INC. 2601 SE Otis Corley Drive Bentonville, AR 72712 Stephanie Anderson Phone: 479 286 2376 MECHANICAL Valid To: September 30,
More informationUL Quality Assurance Private Limited, A-12,Sector-34, Infocity Phase-1,Gurgaon; Haryana. Discipline Mechanical Testing Issue Date
Last Amended on - Page 1 of 22 I. TEXTILE MATERIALS 1. Textile- Fabric/Garment Tensile Strength Strip test BS EN ISO 13934-1: 2013 EN ISO 13934-1: 2013 ISO 13934-1: 2013 ASTM D5035 2011 AS 2001.2.3.1:
More informationThe Groz-Beckert central laboratory. Overview and service specifications
The Groz-Beckert central laboratory Overview and service specifications Material testing Determination of the chemical composition of inorganic materials Emission spectroscopy (Fe, Ni, Al, Cu basis) C,
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CONSUMER TESTING LABORATORIES, INC. 2601 SE Otis Corley Drive Bentonville, AR 72712 Chessie Koko Phone: 479 286 2300 MECHANICAL Valid To: September 30, 2018
More informationGeomembrane Test Methods
Appendix 2 Geomembrane Test Methods AMERICAN SOCIETY FOR TESTING AND MATERIALS (arranged by number) ASTM D-5 ASTM D-36 ASTM D-256 ASTM D-412 ASTM D-413 ASTM D-471 ASTM D-570 ASTM D-638 ASTM D-696 ASTM
More informationPresident For the Accreditation Council Certificate Number Valid to August 31, 2008
A2LA has accredited THE AMERICAN ASSOCIATION FOR LABORATORY ACCREDITATION ACCREDITED LABORATORY PEARL LEATHER FINISHERS, INC. TESTING LABORATORY Johnstown, NY for technical competence in the field of Mechanical
More informationAnnex to the Accreditation Certificate D-PL according to ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17277-01-00 according to ISO/IEC 17025:2005 Period of validity: 07.06.2017 to 06.06.2022 Date of issue: 07.06.2017 Holder
More informationAccessories Performance Standards Manual. Version 1 24/12/
Accessories Performance Standards Manual Version 1 24/12/2010-1 - CONTENTS Page/s Introduction 3 QVC Preferred Laboratories 4-7 Restricted Substances 8 List of Restricted Substances 9 Azo Dye Self Certification
More informationThe IULTCS official methods of analysis for leather
The IULTCS official methods of analysis for leather The IULTCS, through the IULTCS Testing Commissions (IUC, IUF and IUP), provides help and protection for the leather tanning industry worldwide by developing
More informationLaboratory SGS Bangladesh Limited, Laboratory Services, IIUC Tower, Plot No. 9, Agrabad Commercial Area, SK Mujib Road, Chittagong, Bangladesh
Last Amended on 22.04.2015 Page 1 of 5 I. TEXTILE & TEXTILE AUXILIARIES 1. Dimensional stability to washing Dimensional stability to Dry cleaning Appearance of fabric after repeated home laundering Smoothness
More informationAsian Test Equipment. Laboratory Solution by AN ISO 9001:2008 CERTIFIED COMPANY. Tensile Strength Tester. Indentation Hardness Tester
AN ISO 9001:2008 CERTIFIED COMPANY Tensile Strength Tester Indentation Hardness Tester Box Compression Tester Bursting Strength Tester Specific Gravity Balance Hot Air Oven Toxicity Tester Flexometer Melt
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 LABORATORIO CENTRAL DE BADER DE MEXICO 1 Bader de Mexico Sigma 601, Parque Industrial Delta Leon, Guanajuato C.P. 37179 MEXICO Juanita Landin Phone: 52 477
More informationThis tester is designed for conducting tensile, compression, bending, shearing, bonding strength,
FOOTWEAR TESTING GT-K01 Universal Testing Machine (Dual Column) This tester is designed for conducting tensile, compression, bending, shearing, bonding strength, peeling, tearing and other tests for shoes,rubber,
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 AUTONEUM NORTH AMERICA, INC. 480 West 5 th Street Bloomsburg, PA 17815 Justine Danilowicz Phone: 570 316 6078 MECHANICAL Valid To: April 30, 2019 Certificate
More informationSpecification Cloth, Fire Resistant, Softshell
Royal Canadian Mounted Police Gendarmerie royale du Canada Doc. no: G.S. 1045-373 Date: 2017-05-20 Specification Cloth, Fire Resistant, Softshell This document has 12 pages. This document was created in
More informationGeoscience Testing laboratory (Al Ain)
Soil 1 In-situ Density by Sand Replacement Method Using Large Pouring Cylinder & Small Pouring Cylinder In-place Density Test by Sand Cone Method BS 1 Part ASTM D 1556 Dry Density Moisture Content Relationship
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. ACCULAB INC Railroad Drive El Paso, TX Vladimir Juarez Phone: MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ACCULAB INC. 9900 Railroad Drive El Paso, TX 79924 Vladimir Juarez Phone: 915 751 1000 MECHANICAL Valid To: June 30, 2016 Certificate Number: 2692.01 In recognition
More informationDeveloping Common International Standards for Wildland Firefighters Personal Protective Equipment
Developing Common International Standards for Wildland Firefighters Personal Protective Equipment R. Donarski Australasian Fire Authorities Council, East Melbourne VIC, Australia Background The International
More informationLaboratory Bureau Veritas Consumer Products Services Lanka (Pvt.) Ltd., No. 570, Galle Road, Katubedda, Moratuwa, Sri Lanka
Last Amended on - Page 1 of 14 I. TEXTILE & TEXTILE AUXILIARIES 1. Textiles- Fabric/Garment Colorfastness to Crocking AATCC 8: 2013 BS EN ISO 105-X12: 2002 AATCC 116: 2013 Colorfastness to Perspiration
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18869-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 30.08.2013 to 29.08.2018 Holder of certificate: ilf
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
(part of Smithers Rapra and Ltd) Packaging Technical Services Cleeve Road Leatherhead Surrey KT22 7RU Contact: Mr G Collis Tel: +44 (0)1372 802000 Fax: +44 (0)1372 802245 E-Mail: gcollis@smithers.com Website:
More informationFOOTWEAR SAFETY PERSONAL PROTECTIVE EQUIPMENT. built reliable born tough
FOOTWEAR SAFETY JCB a truly world class company In every corner of the world you'll find a JCB machine. JCB is one of the world's top three manufacturers of construction equipment. JCB employ over 8,000
More informationData sheet InnoSolTEX (ORMTEX )
Test results: High Visibility Fabrics - Technical Textiles (protective clothing) LUMINEX, Klopman GmbH, Ratingen, Germany - 60 % cotton - 40 % polyester Antimicrobial activity: DIN EN ISO 20645:2004-100
More information--> Buy True-PDF --> Auto-delivered in 0~10 minutes. GB/T Translated English of Chinese Standard: GB/T3923.
Translated English of Chinese Standard: GB/T3923.2-2013 www.chinesestandard.net Sales@ChineseStandard.net NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA GB ICS 59.080.30 W 04 Replacing GB/T 3923.2-1998
More informationSGS India Private Limited, Consumer Testing Services-Laboratory, No. 134, 2 nd Floor, Sivashakthi Nagar, College Road, Tirupur, Tamil Nadu
Last Amended on 03.12.2015 Page 1 of 13 I. TEXTILE & TEXTILE AUXILIARIES 1. Determination of ph of Aqueous Extract Determination of Formaldehyde Free and Hydrolysed (Water Extraction Method) Released Formaldehyde
More informationBS EN 14465:2003 Test Report
Report Ref: LEHTX00601372 Date Received: BS EN 14465:2003 Test Report Buying Division: 20/10/2011 Date Issued: 24/10/2011 Company Name & ddress Contact Name FLMEPROOFING LIMITED UNITS 1 & 2 LYON INDUSTRIL
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. ACCULAB INC Railroad Drive El Paso, TX Jose Gonzalez Phone: MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ACCULAB INC. 9900 Railroad Drive El Paso, TX 79924 Jose Gonzalez Phone: 915 751 1000 MECHANICAL Valid To: June 30, 2020 Certificate Number: 2692.01 In recognition
More informationF 427/3 Strength Tester for Yarns, Hanks and Fabrics
F 427/3 Strength Tester for Yarns, Hanks and Fabrics In its basic form the F 427/3 Strength Tester has since its introduction proved its worth with clients throughout the world. Its various testing programmes
More informationUNIC - Unione Nazionale Industria Conciaria Via Brisa Milano, Italy h General Issues Related to IU Commissions & CEN Working Groups
Draft Agenda of combined technical meeting of: CEN/TC 289: WG 1, WG 2 and WG 3 IULTCS: IUC, IUP and IUF To be held at: UNIC Unione Nazionale Industria Conciaria Via Brisa 3 20123 Milano, Italy Date: Tuesday,
More informationCrastin PBT Thermoplastic polyester resins
Crastin PBT Thermoplastic polyester resins Product guide and properties Start with DuPont Engineering Polymers DuPont s registered trademark Crastin PBT Thermoplastic polyester resins Introduction CRASTIN
More informationSecond Correlating Revision No. 3 NFPA [ Section No ]
Second Correlating Revision No. 3 NFPA 1991 2015 [ Section No. 2.3.2 ] 2.3.2 ASTM Publications. American Society for Testing and Materials, 100 Barr Harbor Drive, West Conshohocken, PA 19428 2959. ASTM
More informationFordringar och provningsmetoder för skyddsskor, Iätta skyddsskor och yrkesskor för arbete
Requirements and test methods for safety, protective and occuoational footwear for professional use Fordringar och provningsmetoder för skyddsskor, Iätta skyddsskor och yrkesskor för arbete The European
More informationTest report P E. J. Magner Dipl.-Ing. (FH) N. Machill
Kiwa Polymer Institut GmbH Quellenstraße 3 D-65439 Flörsheim-Wicker Tel. +49 (0)61 45-5 97 10 Fax +49 (0)61 45-5 97 19 www.kiwa.de Test report P 8464-2-E Testing order: Tests on the coating Wecryl 124
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. AUTONEUM NORTH AMERICA, INC Haggerty Rd. Novi, MI Jian Pan Phone: MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 AUTONEUM NORTH AMERICA, INC. 29293 Haggerty Rd. Novi, MI 48331 Jian Pan Phone: 248 324 2264 MECHANICAL Valid To: October 31, 2017 Certificate Number: 1745.02
More informationDiscipline Chemical Testing Issue Date Certificate Number T-2217 Valid Until Last Amended on
Last Amended on 19.05.2014 Page 1 of 10 I. TEXTILES & RELATED PRODUCTS 1. Garment / Fabric C/F To Laundering Home & Commercial : Accelerated, Modified 2A Cold (27 0 C), 2A Warm (49 0 C) AATCC 61: 2013
More informationEDICT ± OF GOVERNMENT
EDICT ± OF GOVERNMENT Inordertopromotepubliceducationandpublicsafety,equal justiceforal,abeterinformedcitizenry,theruleoflaw,world tradeandworldpeace,thislegaldocumentisherebymade availableonanoncommercialbasis,asitistherightofal
More informationTensile (Reinf. Geomembranes)
POLYMERIC GEOMEMBRANES Asperity Height ASTM D7466, GRI GM12 Thickness (PVC) ASTM D1593 Thickness (Smooth PE) ASTM D751, D5199, ISO9863-1 Thickness (Textured PE) ASTM D5994 Weight ASTM D751, ISO 9864 Composition
More informationAutomotive Testing and Engineering Services
UL PERFORMANCE MATERIALS Automotive Testing and Engineering Services OEM Testing according to OEM Delivery Specifications performance materials for automotive applications Automotive Supplier Raw Materials
More informationZHPCG CK0226 POWER CABLE WIRE & CABLE
ZHPCG CK0226 POWER CABLE WIRE & CABLE ZHPCG CK0226 POWER CABLE WIRE & CABLE Application/Use Rail approved zero Halogen Power Cables, available as 750V or 1800V rated. ZHPCG cables are all Halogen free,
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 GUILFORD PERFORMANCE TEXTILES KENANSVILLE 1754 NC 903 / Highway 11 North Kenansville, NC 28349 Teresa Carter Phone: 910 296 5314 MECHANICAL Valid To: May 31,
More informationOX2/231 i-oxtra OX2/230 i-oxtra VAC-V2 i-gastra 7100
Classic Series Product Name & Description Classic + Big Data Standards To Follow OX2/231 i-oxtra 7600 Oxygen Permeability Tester This tester utilizes the coulometric sensor method to test the oxygen transmission
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 RELIABLE ANALYSIS SHANGHAI, INC. No. 10, 12A, 24 Lane 1365 Kang Qiao Road East Shanghai, People s Republic of China, 201319 Mr. Victor Wen Phone: 86 21 6818
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 GHESQUIERE PLASTIC TESTING, INC. 20450 Harper Avenue Harper Woods, MI 48225 Douglas Leggat Phone: 313 885 3535 Fax: 313 885 1771 E-mail: doug@gptesting.com
More informationRELIABLE ANALYSIS INC. Troy, MI for technical competence in the field of
A2LA has accredited RELIABLE ANALYSIS INC. Troy, MI for technical competence in the field of Mechanical Testing This laboratory is accredited in accordance with the recognized International ISO/IEC 17025:2005
More informationFIBRE UKANOL ES REACTIVE FLAME RETARDANT ADDITIVE FOR POLYESTER
FIBRE REACTIVE FLAME RETARDANT ADDITIVE FOR POLYESTER ADDITIVE FOR PERMANENT FLAME RETARDANCY IN POLYESTER FIBRES The trend towards the use of synthetic polymers in the textile industry is increasing continuously.
More informationMaterial Testing TEXTILE/LEATHER TESTER. Digital Bursting and Strength Tester Strength Tester. Manual Wrap Reel Motor Wrap Reel Spray Tester
TEXTILE/LEATHER TESTER Bursting and Strength Tester Digital Bursting and Strength Tester Accesories Bursting and Strength Tester Manual Wrap Reel Motor Wrap Reel Spray Tester Motor Twist Tester Yarn Inspector
More informationDILLARD S TEST PROTOCOL FOR DILR US LUGGAGE (V26)
Test Date: Reviewed By/Date: SUPPLEMENTAL PROTOCOLS DILLARD S TEST PROTOCOL FOR 1 The sample shall be reviewed against the requirements of California Proposition 65 to determine if additional testing or
More informationTEST FACILITIES AT SQAE(GS), KOLKATA LAB STORES DTE Name of Estt with address, Name of Srl.No Nodal officer and contact No
TEST FACILITIES AT, KOLKATA LAB STORES DTE Name of Estt with address, Name of Srl.No Testing Facilities Available Range of Test Eqpt. TEXTILE (MECHANICAL) 1 Yarn Strength Tester 5 Kg / 20 Kg 2 Vertical
More informationLabthink Instruments Co. Limited http://www.labthinktestinstruments.com/ We are engaged in manufacturing, supplying, and exporting a comprehensive gamut of Testing Equipment like Permeability Test, Tensile
More information--> Buy True-PDF --> Auto-delivered in 0~10 minutes. GB/T Translated English of Chinese Standard: GB/T
Translated English of Chinese Standard: GB/T25978-2018 www.chinesestandard.net Buy True-PDF Auto-delivery. Sales@ChineseStandard.net ICS 43.020 NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA GB T
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationCOMMERCIAL ITEM DESCRIPTION SEAT COVER CLOTH, POLYESTER OR NYLON, WATER-RESISTANT
[INCH-POUND] May 14, 1999 COMMERCIAL ITEM DESCRIPTION SEAT COVER CLOTH, POLYESTER OR NYLON, WATER-RESISTANT The General Services Administration has authorized the use of this commercial item description
More informationNFPA 1951 Standard on Protective Ensembles for Technical Rescue Incidents
Reference: Various TIA 13-1 (SC 13-8-21/TIA Log #1098) Tentative Interim Amendment NFPA 1951 Standard on Protective Ensembles for Technical Rescue Incidents 2013 Edition Pursuant to Section 5 of the NFPA
More informationFaurecia Interior Systems India Pvt. Ltd., Test Laboratory, Plot No. T-187, Pimpri Industrial Area (B. G. Block), Bhosari, Pune, Maharashtra
Last Amended on - Page 1 of 5 I. AUTOMOTIVE COMPONENTS 1. Component Testing (Rubber & Plastic Products) a. (Plastics/Fabric/ Soiling & Cleanability Ford FLTM BN 112-08: 2010 Daimler DBL 5399: 2007 General
More informationTest Report. CHTC JIAHUA NONWOVEN CO.,LTD No.99,WaGou New Village, Pengchang,Xiantao,Hubei, CHINA
Test Report Order No.: 832/2 Page of 6 Client : CHTC JIAHUA NONWOVEN CO.,LTD No.99,WaGou New Village, Pengchang,Xiantao,Hubei, CHINA Date of order: 5 May 28 Receipt of sample material: May 28 Origin of
More informationTest Report No. AJHL FB Date: JUN.21, 2016 Page 1 of 6
Test Report No. AJHL1606005818FB Date: JUN.21, 2016 Page 1 of 6 HAINING JINMAO WARP KNITTING CO., LTD NO. 38 LUHONG ROAD DINGQIAO TOWN HAINING CITY ZHEJIANG CHINA The following sample(s) was / were submitted
More informationCiMEC Technologies Pvt. Ltd., 23/H, Meldi Estate, Gota, Ahmedabad, Gujarat. Discipline Electrical Testing Issue Date
Last Amended on - Page 1 of 6 I. CABLES AND ACCESSORIES 1. PVC Insulated Cables Tests on Conductor: Annealing Test (copper) IS 10810 (Part 1):1984 (RA 2011) 0 to 50 % Tensile Test (Aluminium) IS 10810
More informationDräger Workstar Flexothane / PVC Splash Suit
Dräger Workstar Flexothane / PVC Splash Suit Chemical protection overalls are always used when it is important to protect a person s skin from harmful influences or hazardous, liquid substances. ST-4814-2005
More informationCIMEC Technologies Pvt. Ltd., 23/H, Meldi Estate, Gota, Ahmedabad, Gujarat. Discipline Mechanical Testing Issue Date
Last Amended on - Page 1 of 9 I. BUILDINGS MATERIALS 1. Cement & Pozzolanic Material Fineness (Dry Sieving) IS 4031(Part 1): 1996 (RA 2011) 10 % to 100 % Fineness (Blain Air Permeability) IS 4031(Part
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 HP PELZER MATERIALS TESTING LABORATORY 1175 Crooks Road Troy, MI 48084 Renata Machnik Phone: 248 280 2500 x176 MECHANICAL Valid To: November 30, 2018 Certificate
More informationGrade A. Evo EV-19 EV-5 EV-4 EV-2 EV-18 EV-14 EV-10 EV-22 EV-20 EV-21 EV-1 EV-23 EV-24 EV-25. Discover more at inscapesolutions.
Grade A Evo EV-2 EV-4 EV-5 EV-9 EV-10 EV-11 EV-14 EV-18 EV-1 EV-19 EV-20 EV-21 EV-22 EV-23 EV-24 EV-25 Evo Application Fan Specifications Contents Weight Per Unit 100% polyester 300 g/m² Performance Colorfastness
More informationPERFORMANCE CHARACTERISTICS ANTIQUE VINYL FLOORING
ANTIQUE VINYL FLOORING Thickness 1.6 mm Width (Mtrs.) 2.0 mtr. 2 2.85 kg/m Thickness of wear layer EN 429 0.20 mm Wear Group M (%) EN 434 < 0.4% at Low Temperature Shall not break, crack or show any other
More informationRohm and Haas Company. Leather Wet End Technology
Rohm and Haas Company Leather Wet End Technology Leather Wet End Products Wet End Technology Base Acrylic Polymers Leukotans Acrylic Acid based retanning polymers Lubritans Acrylic Acid / Ester based retanning/lubricating
More informationAdmaterials Technologies Pte Ltd Certificate No. : LA B 58 Sungei Kadut Loop Singapore Issue No. : 14
Admaterials Technologies Pte Ltd Certificate No. : LA-2008-0422-B 58 Sungei Kadut Loop Singapore 729501 Issue No. : 14 Date : 20 September 2018 Page : 1 of 34 FIELD OF TESTING : Civil Engineering Testing
More informationTest Report No. AJHL FB Date: OCT.26, 2016 Page 1 of 6
Test Report No. AJHL1609010810FB Date: OCT.26, 2016 Page 1 of 6 SOYANG TECHNICAL TEXTILE (ZHEJIANG) CO., LTD NO.36 JINNIU ROAD, JIANSHAN DISTRICT, HAINING CITY, ZHEJIANG PR., CHINA The following sample(s)
More informationTest Report No. AJHL FB Date: APR.06, 2016 Page 1 of 5
Test Report AJHL1603002392FB Date: APR.06, 2016 Page 1 of 5 SOYANG TECHNICAL TEXTILE (ZHEJIANG) CO., LTD NO.36 JINNIU ROAD, JIANSHAN DISTRICT, HAINING CITY, ZHEJIANG PR., CHINA The following sample(s)
More informationDILLARD'S INC TEST PROTOCOL FOR DILL USA- (V22) HANDBAG (CHILDREN)
By/Date: Page 1 of 6 SCOPE: This protocol is applicable for testing of handbag for children. SUPPLEENTAY POTOCOL Note: Additional cost, sample size and TAT may be required if testing to 1 or more supplemental
More informationFootwear Testing Guide & Requirements
Footwear Testing Guide & Requirements MTS Testing Services on Consumer Products Modern Testing Services is a global, strategic partner for fast, accurate, and cost effective quality assurance solutions
More informationSpaceloft Insulation TECHNICAL GUIDE
(Click below to jump to sections.) Contents Introduction 3 Non-Combustibility and Fire Performance 4 EN 13501-1 Reaction to Fire Classification (Bodycote, Warrington Fire) ASTM E 84 Surface Burning Characteristics
More informationInstallation Devices 4
Installation Devices 4 4.1 Tapes HelaTape Flex - Vinyl Electrical Tapes HelaTape Wrap - Vinyl Tapes HelaTape Shield - Conductive Tapes HelaTape Flex 15 - All Purpose Vinyl Insulating Tape HelaTape Flex
More informationLeather testing methods
Leather testing methods Please take into consideration that testmethods and specifications are under continuous revision. A list of addresses at the end of this chapter provides information where the up
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Charter Coating Service (2000) Ltd. Suite
More informationDegussa Construction Chemicals (Schweiz) AG Division CONICA Technik Industriestrasse 26 CH 8207 Schaffhausen October 19, 2004
Degussa Construction Chemicals (Schweiz) AG Division CONICA Technik Industriestrasse 26 CH 8207 Schaffhausen October 19, 2004 L A B R E P O R T USSL Reference: Subject: 5928US/Kol/gl Synthetic Sports Surfacing
More informationInstallation device. HelaTape. Electrical tapes for sealing, insulation and bundling of cable and conduits.
Electrical tapes for sealing, insulation and bundling of cable and conduits. HellermannTyton offers a wide range of PVC and rubber tapes for sealing, insulation and bundling of cable and conduits. PVC-
More informationIt may not be used for commercial purposes, unless it is reproduced in its entirety
REPORT Assessment of Desso idna X 60-16 with SBR ShockWave in accordance with GAA s Performance and Construction Requirements for Synthetic Turf Pitches Client Desso Sports BV Robert Ramlotstraat 89 Dendermonde
More informationTEST REPORT Reference No. : TRHZ _R1 Date : Nov. 27, 2012 Page No.: 1 of 5
Reference. : TRHZ0630_R Date : v. 27, 202 Page.: of pplicant : ddress : HINING LOFTY XUN BNNER TEXTILE CO., LTD. NO.70-,LONGXING ROD, HICHNG STREET, HINING CITY, ZHEJING, CHIN. The following merchandise
More informationFIRE REGULATION IN FURNITURE WORLD OVERVIEW
6/8 FIRE REGULATION IN FURNITURE WORLD OVERVIEW For your internal use only http://www.crepim.com / 1 Since many years, comprehensive studies of the ignition hazard of upholstery and covering materials
More informationPOLYCAST CELL CAST ACRYLIC Solutions for Aerospace
POLYCAST CELL CAST ACRYLIC Solutions for Aerospace Delivering aircraft transparencies for the demanding aerospace industry. cast cell cast acrylic has been manufactured and trusted by the aerospace industry
More informationHari Shankar Singhania Elastomer & Tyre Research Institute, HASETRI, Plot No. 437, R&D Center, Hebbal Industrial Area, Mysuru, Karnataka
Page 1 of 11 CHEMICAL TESTING I. RUBBER AND RUBBER PRODUCTS 1. Polymer/ Elastomeric materials 2. Fillers Heat Loss of carbon black Ash content ASTM D5667 0.1-45 % ISO 247 Dirt Content ASTM D1278 0.1-10
More informationPresentation of the draft Global Technical Regulation on Safety Belts
Informal Document N 18 (30th GRSP, 3-6 December 2001 Agenda item 1.3.4) November 28 th, 2001 Presentation of the draft Global Technical Regulation on Safety Belts The draft global technical regulation
More informationAnnex to the Accreditation Certificate D-PL according to ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11180-01-00 according to ISO/IEC 17025:2005 Period of validity: 28.07.2017 to 27.07.2022 Date of issue: 28.07.2017 Holder
More informationLIST OF PUBLISHED STANDARDS
Report : 08-0-6 Page o : Of 5 LST OF PUBLSHED STDRDS Total Count: 78 umber SS umber pproved mendment SBS/TC 066 SS 97:07 7.0 Electric cables - mpregnated paper-insulated 07-0-7 metal-sheathed cables for
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 nd Floor uilding No 4 Shanghai Comalong Industrial Park 889 Yi Shan Road Shanghai 200233 China Contact: Ms Cynthia Liu Tel: +86 21 6091
More informationACCREDITED LABORATORY
A2LA has accredited THE AMERICAN ASSOCIATION FOR LABORATORY ACCREDITATION ACCREDITED LABORATORY AKRON RUBBER DEVELOPMENT LABORATORY, INC. Akron, OH for technical competence in the field of Mechanical Testing
More information