LAPOL HDT TECHNICAL BULLETIN
|
|
- Melvyn Bell
- 5 years ago
- Views:
Transcription
1 Raising the Heat Deflection Temperature of PLA LAPOL HDT TECHNICAL BULLETIN OCTOBER
2 Polylactic Acid (PLA) The Front Runner in Bioplastics 100% degradable thermoplastic resin Made from renewable resources Flexible or rigid Processed on standard converting equipment Multiple consumer and industrial applications
3 Limitations of PLA Low Heat Deflection Temperature (HDT) C Sticking and Deformation During Transport, Storage and Use Brittleness Poor Impact Resistance Long Mold Times Too Costly to Process
4 Lapol HDT Chemistry Lapol HDT increases crystallinity and reduces crystallization time of PLA creating high heat deflection temperatures. Lapol Offers Solutions Different grades of Lapol HDT Additives that reduce brittleness with limited effects on heat tolerance properties Additives that reduce crystallization time that act synergistically with Lapol HDT As a result, there is a trade off between brittleness and improved heat tolerance.
5 Lapol HDT Ratios with PLA Lapol HDT A copolyester of d lactide based on the stereochemistry of PLA. Lapol HDT / PLA 50/50 Free volume is reduced, the crystallization increased, and the melting temperature is around 240 o C, but it is too brittle to be processed usefully. PLA/Lapol HDT 80/20 A resin that processes well in many applications while increasing use temperatures.
6 Thermal Mechanical Analysis of Lapol HDT After annealing PLA requires annealing for increased HDT, but will distort rendering the parts unusable; whereas, Lapol HDT does not require annealing and will not distort under elevated temperatures
7 Thermal Mechanical Analysis of NatureWorks PLA with Lapol HDT PLA grades respond differently to Lapol HDT at lower concentrations, but all show an improvement in their heat tolerance at greater than 20%. Concentrations of 20% show the best combination between acceptable mechanical properties and heat tolerance improvement.
8 Physical Properties of Lapol HDT PROPERTIES LAPOL HDT Melting Point C Density Color State 1.25 g/cc Off White Solid Can modify the heat deflection temperature of PLA Excellent miscibility with commercial PLA FDA Compliant Compostable Renewable
9 Addition of Vinnex with Lapol HDT to Reduce Brittleness with NatureWorks PLA Lapol HDT is effective with NatureWorks Ingeo 4032D, but will increase the heat tolerance of any PLA grade with more than 95% d lactic acid content. Lapol HDT with Vinnex 2504 or 2505 improves the impact resistance with limited effects on heat tolerance of the blends. Addition of more than 10% Vinnex 2504 or 2505 is not recommended. Thermoforming cycle times have been shown to be reduced by 40%.
10 Thermal and Mechanical Properties of PLA/Lapol HDT with Vinnex Formulation Ingeo 2003D Ingeo 4032D Low IV Lapol HDT Low IV Lapol HDT Vinnex Vinnex Mechanical Properties Tensile Draw speed: 50 mm/min Sample Size mm mm Tensile Strength Max [MPa] [MPa] Tensile Strength Avg. [MPa] [MPa] [%] [%] Modulus [MPa] [MPa] Draw Speed: 1 mm/min Thermal Properties Heat Distortion Temperature Vicat A 1019 g [ C] [ C] Vicat B 5097 g [ C] [ C] Impact Properties Charpy Impact Avg [kj/m²] [kj/m²]
11 Effect of Lapol HDT with Vinnex 2504 on NatureWorks PLA 4032D and 2003D Lapol HDT Low IV in NatureWorks 4032D with Vinnex 2504 Lapol HDT Low IV in NatureWorks 2003D with Vinnex 2504 Charpy [kj/m2] Tensile Strength [MPa] Elongation@ Break [%] Charpy [kj/m2] Tensile Strength [MPa] Elongation@ Break [%] Ingeo 2003D HDT (Vicat A) [ C] Ingeo 4032D 80/20 blend 5% Vinnex % Vinnex 2504 HDT (Vicat A) [ C] 80/20 blend (low IV Lapol HDT) 10% Vinnex % Vinnex % Vinnex 2504
12 Lapol HDT with PBS
13 Thermo Mechanical Analysis (TMA) Different Lapol HDT Ratios with PBS and PLA The Synergistic Effects of Lapol HDT and Polybutylenesuccinate (PBS) Adding 5% PBS with 6% Lapol HDT Extends the Temperature Deformation to 150 C with Little Dimensional Change 13
14 55/45 Lapol HDT/PBS Reduces Cost and Improves Performance Adding 11% Lapol/PBS 55/45 Lowers the Overall Lapol HDT percentage requirement from 20% to 6% PBS is about 1/3 the cost of Lapol HDT Maintains the Heat Deflection Temperature performance Reduces Brittleness Both Lapol HDT and PBS can be supplied as a compound or neat to be directly fed in the extruder 14
15 SUMMARY Lapol HDT Attributes Increases heat deflection temperatures in PLA to greater than 150 C (Vicat A) Lapol HDT does not require annealing and will not distort under elevated temperatures Lapol HDT Biopolymer Resins are: Renewable Compostable FDA Compliant Thermoforming cycle time has been shown to be reduced by 40% Can be added directly at the thermoformer extruder or injection molder Adding PBS can increase elongation and reduce cost while maintaining HDT State Street Suite 2A Santa Barbara, CA
Crastin PBT Thermoplastic polyester resins
Crastin PBT Thermoplastic polyester resins Product guide and properties Start with DuPont Engineering Polymers DuPont s registered trademark Crastin PBT Thermoplastic polyester resins Introduction CRASTIN
More informationFossil-fuel resources becoming more costly: economically, environmentally & geopolitically.
Fossil-fuel resources becoming more costly: economically, environmentally & geopolitically. A need exists for sustainable, low-cost, bio-based feedstock in the renewable plastics industry. Diversion of
More informationTexin 245 Covestro PUR Thermoplastic Polyurethane Elastomer (Polyester) Action Saturday, October 22, 2016 Units English Legend (Open) General Information Product Description Texin 245 resin is an aromatic
More informationK-Resin SB Copolymer/Crystal Polystyrene Sheet Property Modification with High Impact Polystyrene
Styrene-Butadiene Copolymers Plastics Technical Center Report #9 K-Resin SB Copolymer/Crystal Polystyrene Sheet Property Modification with High Impact Polystyrene INTRODUCTION. Many sheet extruders are
More informationWolf Kunststoff ZEDEX ZX-530 A5D Polymer Alloy
Wolf Kunststoff ZEDEX ZX-530 A5D Polymer Alloy Category : Polymer, Thermoplastic Material Notes: Main Characteristics: Low Creep; Low moisture absorption; Flame retardant; Low impurity ions; Good machinability;
More informationATEVA MEDICAL EVA POLYMERS UNIQUE SOLUTIONS FOR YOU
ATEVA MEDICAL EVA POLYMERS UNIQUE SOLUTIONS FOR YOU WHAT IS ATEVA MEDICAL? Ateva Medical EVA-based resins deliver the reliable performance required for medical applications. Celanese can help companies
More informationPolyamide 6 & 66 for Injection Moulding
Polyamide 6 & 66 for Injection Moulding Promyde is a trademark of NUREL 1 NUREL Engineering Polymers Polymerization Integrated into In-House Compounding 50 years experience in polymerization processes
More informationPOlyNIl Product Brochure
POLYNIL Product Brochure APPLICATION PA6.6 Unreinforced for PRODUCT P50 FI P50 FIHS P50 FIBK P50 N P50 FL P50 FLBK P50 L Polynil P50 LBK PROPERTIES Internally Internally heat stabilized, Internally Nucleated,
More informationBLUE ULTRA Pipe & Tubing contains no regrind resin in its manufacture
BLUE ULTRA is extruded using current state of the art 100% pure PE4710 virgin resin with decades of successful history - no extra wall thickness is required to retain its extreme level of UV protection
More informationCONDUCTIVE COMPOUNDS. CABELEC Conductive Compounds Product Selection Guide
CONDUCTIVE COMPOUNDS CABELEC Conductive Compounds Product Selection Guide Cabot s Performance Materials: Over 130 Years of Getting You Where You Want to Go Cabot Corporation is a global performance materials
More informationHigher Temperature PP-Based Composite Provides Nylon/PA- Level Performance at Lower Weight and Economic Feasibility
Higher Temperature PP-Based Composite Provides Nylon/PA- Level Performance at Lower Weight and Economic Feasibility Society of Plastic Engineers Automotive Composites Conference & Exhibition September
More informationCABELEC Conductive Compounds Product Selection Guide
Conductive Compounds CABELEC Conductive Compounds Product Selection Guide CABELEC Conductive Compounds Product SELECTION Guide Cabot s Performance Materials: Over 130 Years of Getting You Where You Want
More informationADVANCED MEDICAL POLYMERS FOR THE LIFE OF YOUR PROGRAM. Medical Product Portfolio
ADVANCED MEDICAL POLYMERS FOR THE LIFE OF YOUR PROGRAM Medical Product Portfolio 1 OUR MEDICAL TECHNOLOGY POLYMERS MT PORTFOLIO OFFERS DESIGN FREEDOM AND ADVANCED PERFORMANCE Offering advanced polymer
More informationFeedstock Diversification through Innovation Ken Williams November 3, 2015
Feedstock Diversification through Innovation Ken Williams November 3, 2015 1 2013 NatureWorks LLC Feedstock Diversification though Innovation Who is NTR? Why is NTR doing this? What feedstock(s) make sense?
More informationPolyamide 6 for Injection Moulding
Polyamide 6 for Injection Moulding Promyde is a trademark of NUREL 1 NUREL Engineering Polymers Excellence in Polymerization Recent technical advancements in NUREL polymerization processes have enabled
More informationAntifreeze Resistant Fatigue Resistant Gasoline Resistance Automotive Under the Hood ASTM D 4066 PA012G30 ASTM D 6779 PA012G30
Vydyne R530H Nylon resins are general purpose polyamide, heat stabilized, hydrolysis resistant, 30% glass fiber reinforced resins. Available in natural and black. It is specifically designed to maximize
More informationCONDUCTIVE COMPOUND AND CONCENTRATES CABELEC CONDUCTIVE COMPOUNDS AND CONCENTRATES PRODUCT SELECTION GUIDE
CONDUCTIVE COMPOUND AND CONCENTRATES CABELEC CONDUCTIVE COMPOUNDS AND CONCENTRATES PRODUCT SELECTION GUIDE Performance and leadership in black plastics Cabot Corporation is a global performance materials
More informationSR InfuGreen 810 Green Epoxy systems for Injection and Infusion
Page 1 / 9 SR InfuGreen 810 Green Epoxy systems for Injection and Infusion The InfuGreen 810 is a two-component epoxy system. It has been specially formulated for resin transfer processes, such as injection
More informationMITRAS MATERIALS GMBH
MITRAS MATERIALS GMBH Friedrich-Ochs-Str. 2 92637 Weiden/Opf. Tel.: 0961 / 89-810 / 89-812 Fax: 0961 / 89-672 Directory of services L a b o r a t o r y MITRAS MATERIALS GMBH Edition 02/18 Rev. 08 page
More informationHigh Performance ABS Products for Automotive Applications
High Performance ABS Products for Automotive Applications ELIX Polymers is a leading manufacturer of ABS (Acrylonitrile-Butadiene-Styrene) resins and derivatives in Europe. Operating from its head office
More informationTechnical Data Sheet SUPER SAP CLR Epoxy System Clear, General Purpose Liquid Epoxy Resin
Technical Data Sheet SUPER SAP CLR Epoxy System Clear, General Purpose Liquid Epoxy Resin Product Overview SUPER SAP CLR SYSTEM is composed of Super Sap CLR Epoxy, a modified, clear liquid epoxy resin,
More informationTECHNYL A 218 BLACK 21N
TECHNYL A 218 BLACK 21N Description TECHNYL A 218 Black 21 N is an unreinforced polyamide 66, standard viscosity, heat stabilized for injection moulding.it is available in black color. Key Properties Chemical
More informationCompostable Solutions for Packaging. FlexPackCon 2016 Randy Jester
Compostable Solutions for Packaging FlexPackCon 2016 Randy Jester 10/14/2016 1 Overview Film structural polymers ecovio aliphatic-aromatic polyester / PLA blend ecoflex aliphatic-aromatic polyester Packaging
More informationSR GreenPoxy 33 / SZ 8525 Clear epoxy system for compression moulding
Page 1 / 8 SR GreenPoxy 33 / SZ 8525 Clear epoxy system for compression moulding High bio-based carbon content SR GreenPoxy 33 resin is outcoming from the latest innovations in bio-based chemistry. SR
More informationWe create chemistry that makes compost love plastic. Thomas Pitzi Sales Manager North America BASF Biopolymers June 23, 2016
We create chemistry that makes compost love plastic. Thomas Pitzi Sales Manager North America BASF Biopolymers June 23, 2016 Strong Commitment to Biopolymers We believe in this market and invest long term!
More informationAKROMID FR (PA 6.6, PA 6, PA 6.6/PA 6, PPA) AKROLOY FR (PA Blend)
FLAME-RETARDANT COMPOUNDS AKROMID FR (PA 6.6, PA 6, PA 6.6/PA 6, PPA) AKROLOY FR (PA Blend) AKRO-PLASTIC GmbH Member of the Feddersen Group Flame-retardant Products Increasingly Important for Extended
More informationEcolGreen BioPolymer. EcolGreen Co.,Ltd (121B-2L)691. Namdong-gu. gu, Incheon,, Korea Tel : ,, Fax : 82-32
Ver 3.English.2008 EcolGreen BioPolymer EcolGreen Co.,Ltd http://www.ecolgreen.com (121B-2L)691 2L)691-1 Gojan-dong Namdong-gu gu, Incheon,, Korea Tel : 82-32 32-813 813-5023 5023,, Fax : 82-32 32-813
More informationZenite LCP Celanese LCP-009 AM 10/13
Zenite LCP 2013 Celanese LCP-009 AM 10/13 Zenite LCP Overview LCPs and Zenite LCP Zenite LCP Specific Properties Products and Roadmap UL Considerations Comparative Data 2013 Celanese LCP-009 AM 10/13 Zenite
More informationWL115 WL Plastics PE4710 Water Pipe
WL115 WL Plastics PE4710 Water Pipe WL Plastics PE4710 Pressure Water Pipe WL Plastics WL Plastics is dedicated to the principle that customers should have the best in quality and service. WL Plastics
More informationREACTIVE BLENDING OF POLYETHYLENE AND POLY(L- LACTIC ACID) USING A HIGH-SHEAR EXTRUDER
18 TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS REACTIVE BLENDING OF POLYETHYLENE AND POLY(L- LACTIC ACID) USING A HIGH-SHEAR EXTRUDER Y. Yomogida 1, H. Tsukada 1, Y. Li 2, H. Shimizu 1 * 1 Nanotechnology
More informationQCB Thermoplastic Bearing Units
QCB Thermoplastic Bearing Units CAT TP 2017 E Ver1 NBC Group Ltd In the interest of continuing improvement, NBC Group Ltd reserves the right to modify any product or specification without prior notice.
More informationStandard Classification System for Polyamide Molding and Extrusion Materials (PA) 1
Designation: D 6779 05 Stard Classification System for Polyamide Molding Extrusion Materials (PA) 1 This stard is issued under the fixed designation D 6779; the number immediately following the designation
More information3M TM Dyneon TM Fluoroplastics. Product Comparison Guide.
3M TM Dyneon TM Fluoroplastics Product Comparison Guide. Characteristics 3M Dyneon Fluoroplastics. Nominal values, not for specification purposes 1) Melt Index is measured at the following conditions 265
More informationEpoxy Resin L Unit Value
Technical data Epoxy Resin L + Hardener S, L, CL, EPH 500, W 300, GL 1, GL 2, EPH 573 and EPH 161 Low viscosity, free of solvents and fillers Fast impregnation of glass, aramid, and carbon fibres High
More informationThermx PCT. High-performance Polyester. Product and Properties Guide
Thermx PCT High-performance Polyester Product and Properties Guide Thermx Chemical resistance Processability Dimensional stability Heat resistance Fast molding cycles Thermx PCT polyester is a hightemperature
More informationPaint Resin in Thermoplastics Properties and Applications
Paint Resin in Thermoplastics Properties and Applications Jennifer Lynch EPA Seminar Technology Review and Demonstration of Paint Resin Reclamation Technology for Use in Thermoplastics June 12, 2008 Overview
More informationMATERIAL DATA SHEET TECHLITE LIGHT GREY ACOUSTICAL FOAM
TECHLITE Light Grey Acoustical Foam is a light-grey, open-cell foam made of melamine resin. TECHLITE is manufactured in the form of untrimmed blocks with a thin outer skin. The standard dimensions of the
More informationULTEM* 1010 Resin. SABIC Innovative Plastics - Polyether Imide. Actions. General Information. Product Description
ULTEM* 1010 Resin SABIC Innovative Plastics - Polyether Imide Actions General Information Product Description Transparent, enhanced flow Polyetherimide (Tg 217C). ECO Conforming, UL94 V0 and 5VA listing.
More informationCOATINGS ALKYD POLYESTERS POLYOLS FOR POLYURETHANES POLYMERIC RESINS
COATINGS ALKYD POLYESTERS POLYOLS FOR POLYURETHANES POLYMERIC RESINS 1 // NATUREWORKS PERFORMANCE CHEMICALS ALKYD POLYESTERS CREATING PERFORMANCE THROUGH CHEMISTRY Building upon decades spent advancing
More informationPOLYETHYLENE High Density
POLYETHYLENE High Density PE-3408/PE-3608 ENGINEERED FOR WATER AND MINING PIPING SYSTEMS PLASTIC MANUFACTURES SINCE 1953 POLYTUBES HIGH MOLECULAR WEIGHT (HMW) High Density Polyethylene Pipe for General
More informationFusion Equipment & Tools Electrofusion Processor Scraper Tools Rerounding Tools Socket Fusion Kit
Fusion Equipment & Tools Electrofusion Processor Scraper Tools Rerounding Tools Socket Fusion Kit 71 I Fuse 105 Electrofusion Processor The IntegriFuse I Fuse 105 Electrofusion Processor is the next generation
More informationThe above data are preliminary and are subject to change as additional data are developed on subsequent lots.
Zenite LCP Product Information liquid crystal polymer resin 30% Glass Reinforced Liquid Crystal Polymer Resin PRELIMINARY DATA Zenite 7130 is a 30% glass reinforced LCP resin having excellent toughness
More informationROLLER LUBRICANT VISCOSITY RATING
CHAIN INFORMATION OUTER PLATE OUTER PLATE PIN 2 PIECES OF EACH MAKE AN OUTER LINK BUSH INNER PLATE INNER PLATE 2 PIECES OF EACH MAKE AN INNER LINK ROLLER AMERICAN BRITISH Lubrication (Dependent on power
More informationPlaxica Optipure The Route to Competitive High Heat & Performance PLA Grades
Plaxica Optipure The Route to Competitive High Heat & Performance PA Grades World Congress on Industrial Biotechnology, Montreal, July 25 th 2017 Phil Goodier, CEO, Plaxica p.goodier@plaxica.com 1 Plaxica
More informationNEW APPLICATION TECHNOLOGIES IN PHENOLIC MOLDABLE COMPOSITES
NEW APPLICATION TECHNOLOGIES IN PHENOLIC MOLDABLE COMPOSITES 1. Why PF-GF have an increasing share of new engine components Plastics are replacing metal parts for a wide range of uses in the automotive
More informationVERLON No Swell Wear Rings
VERLON No Swell Wear Rings Ultra precision +.001 tolerance on cross section NO SWELL - Lowest friction Strength to 40,000 PSI Large range of widths, cross sections and diameters - metric too Features &
More informationinnerduct Innerduct INNERDUCT tidbit
innerduct Innerduct Innerduct is manufactured from High Density Polyethylene in accordance with the specifications of ASTM F-2160 and/or NEMA TC 7. Other dimensional requirements may be acceptable upon
More informationBiodegradable Polymer
Biodegradable Polymer 06 EnPol is 07 General Properties Bio degradable plastics can be categorized by their main production methods: ones being produced by living organisms which include linear polyesters
More informationNORDEL EPDM Product Selection Guide
NORDEL EPDM Product Selection Guide NORDEL EPDM products are members of Dow s family of ethylene propylene diene terpolymers and feature the widest range of ethylene content available in the industry.
More informationProduct Description PLEXIGLAS GS PLEXIGLAS XT
Product Description PLEXIGLAS GS PLEXIGLAS XT PLEXIGLAS trademark for the world s first acrylic was invented by us and first produced by the casting process in 1933. Today we manufacture PLEXIGLAS GS (=
More informationDSM Elastomers Presentation at the VKRT
THE Global Innovative EPDM Supplier Innovation @ DSM Elastomers Presentation at the VKRT Maurits F.H. van Tol DSM Elastomers Vice-President, Global Research and Development February 12th, 2009 Outline
More informationTECHNICAL DATA SHEET. Solmax HDPE Premium Smooth - Metric Values SPECIFICATIONS PROPERTY TEST FREQUENCY (1) UNIT. Solmax.
HDPE Premium Smooth - Metric Values International Inc., 2801 Boul. Marie-Victorin, Varennes, Qc, Canada, J3X 1P7 440-3100 460-3100 480-3100 500-3100 SPECIFICATIONS Thickness (min. avg.) ASTM D-5199 Thickness
More informationACRYLONITRILE THERMOPLASTICS
Report No. 78 ACRYLONITRILE THERMOPLASTICS by ROBERT H. SCHWAAB August 1972 A private report by the PROCESS ECONOMICS PROGRAM STANFORD RESEARCH INSTITUTE I MENLO PARK, CALIFORNIA CONTENTS 1 INTRODUCTION,........................
More informationEFFECT OF TYRE OVERLOAD AND INFLATION PRESSURE ON ROLLING LOSS & FUEL CONSUMPTION OF AUTOMOBILES CARS
EFFECT OF TYRE OVERLOAD AND INFLATION PRESSURE ON ROLLING LOSS & FUEL CONSUMPTION OF AUTOMOBILES CARS D.MADHUSUDHANA 1 C. NAGARAJA 2 PG Student Assistant Professor Dept. of Mechanical Engineering Dept.
More informationQUALITY FITS. Product range injection molding grades with reference data
QUALITY FITS. Product range injection molding grades with reference data POCAN COLOR NOMENCLATURE Pocan is available in a large number of colors. We use a six-digit number to precisely characterize the
More informationDelivery program Semi-finished plastics
Delivery program Semi-finished plastics Centroplast Engineering Plastics GmbH Engineering plastics belong to most important industrial materials. They convince above all by their level of performance and
More informationElastollan Product Range
Thermoplastic Polyurethane Elastomers (TPU) Elastollan Product Range Elastogran is Polyurethanes Contents Quality management to DIN EN ISO 9001 Page 2 Nomenclature for Elastollan Page 3 Packaging, Storage
More informationObtaining ASTM D6400- D6868 Approval
Rev 3.0 Obtaining ASTM D6400- D6868 Approval Woods End Laboratories inc. is a BPI Approved Certifier lab 1 Key BPI Requirements All products must meet ASTM D6400, ASTM D6868, ISO17088 or EN13432 Not contain
More informationCHEZACARB. Conductive Carbon Black for Polymer Compounds SIMPLY IMPROVING EVERYDAY LIFE
CHEZACARB Carbon Black for Polymer Compounds SIMPLY IMPROVING EVERYDAY LIFE CHEZACARB AC COMPOUNDS CHEZACARB Volume resistivity as a function of CB content (extruded sheets) 1E+09 Carbon Black for Polymer
More informationHigh Surface Area Silica. High Performance Tread. STRUKTOL SCA 98 (Tetrasulfide)
Producers of Specialty Chemicals Struktol Company of America 1 E. Steels Corners Road P. O. Box 19 Stow, Ohio 9 www.struktol.com High Surface Area Silica in High Performance Tread with Next Generation
More informationQuick Splice II. 35 kv Molded Rubber Inline Splicing Kit Data Sheet. 2. Applications. 1. Product Description
Quick Splice II 5461 (CN) Cable (JCN) Cable 35 kv Molded Rubber Inline Splicing Kit Data Sheet Accessory Splice Jacket 1. Product Description The 3M 5461 Quick Splice II is a 35 kv class inline splice
More informationHigh Temperature Thermoplastic Nylons 01/02S3
High Temperature Thermoplastic Nylons 01/02S3 May 2002 Nexant, Inc./Chem Systems 44 South Broadway White Plains, New York 10601-4425 Telephone (914) 609-0300 Facsimile (914) 609-0399 www.chemsystems.com
More informationREMA TECHNICAL INFORMATION DIN 80, 160, 320. Page 1 of 13
DIN 80, 160, 320 C O N N E C T O R D A T A S H E E T Page 1 of 13 DIN 80, 160 and 320 Connector datasheet REMA is the leading supplier of DIN-style (DIN standard 43589) quick-disconnect power connectors.
More informationProduct Information S/PA
Description Tico S is a high performance machinery mounting material. It matches today s fast changing manufacturing environment, where ease of machine mounting and flexibility of plant layout are prime
More informationCovering the world. Protecting the Earth.
Covering the world. Protecting the Earth. SOLMAX.COM CANADA - MALAYSIA - CHILE - USA - CHINA - SOUTH AFRICA - FRANCE - INDIA At Solmax, we understand that a flexible and weathering resistant geomembrane
More informationClariant Waxes for PVC Processing GENERAL
Clariant Waxes for PVC Processing GENERAL Public Beate Treffler BU Additives Technical Marketing Waxes 20.06.2013 Clariant Waxes for PVC Processing CONTENT PRODUCTS APPLICATIONS PERFORMANCE Public Beate
More informationQuick Splice II 5451R. 25/28 kv Molded Rubber Cable Repair Splicing Kit Data Sheet. 1. Product Description. 2. Applications
Quick Splice II 5451R (CN) Cable (JCN) Cable Accessory Splice Jacket 25/28 kv Molded Rubber Cable Repair Splicing Kit Data Sheet 1. Product Description The 3M 5451R Quick Splice II is a 25/28 kv class
More informationTDI-terminated polyester based prepolymer
PRODUCT DATA VIBRATHANE 8080 TDI-terminated polyester based prepolymer Urethane Prepolymers VIBRATHANE 8080 VIBRATHANE 8080 is a TDI-terminated polyester based prepolymer which yields an 80 Shore A hardness
More informationCertificate of Accreditation
ISO/IEC 17025:2005 Certificate of Accreditation Certificate Number L2195 Exova, Inc. Anaheim 3883 East Eagle Drive Anaheim CA 92807 has met the requirements set forth in L-A-B s policies and procedures,
More informationYELLOWSTRIPE 8300 BIMODAL HDPE PIPE DATA SHEET
PerformancePipe.com YELLOWSTRIPE 8300 BIMODAL HDPE PIPE DATA SHEET Yellowstripe 8300 Pipe meets or exceeds: ASTM D2513 CAN/CSA-B137.4 UPC ASTM D3350, cell classification PE445574C and PE445576C PPI TR-4
More informationElectronic Materials Brochure
Electronic Materials Brochure TABLE OF CONTENTS 3 Introduction to Materials 4 ISODAMP C-8000 Materials 6 ISOLOSS SL Molding Materials - Thermosets 8 CONFOR EG Foams CONFOR SC Foams ISODAMP C-8000 MATERIALS
More informationCEAST - HDT & VICAT. Thermal Testing Instruments
CEAST - HDT & VICAT Thermal Testing Instruments HDT/VICAT TESTING Thermal Testing on Plastics Why? To characterize the material at high temperatures HDT Test Vicat Test 2 HDT/VICAT TESTING Vicat standards
More informationAhmedabad Textile Industry s Research Association (ATIRA), P.O. Ambawadi Vistar, Ahmedabad, Gujarat
Last Amended on - Page 1 of 13 I. TEXTILE MATERIALS 1. Fibre Micronaire Length Length uniformity Strength Elongation% Short fibre % Colour Whiteness (Rd) Colour Yellowness (+b) Neps/g Neps size SCN/g SCN
More informationChallenges For Future Powerplant Coolant Systems
Challenges For Future Powerplant Coolant Systems Steven Mok, Karla Butler, Terrence Cressy, Paul Kane, Brian Fish (Presented at SPE Auto EPCON, April 28, 2009. Sterling Heights, MI) 2 Discussion Agenda
More informationList of Malaysian Standard (MS) for Cables. Prepared by MCMA SWO. Cable - Armoured. Cable - Armoured
List of Malaysian Standard (MS) for Cables Prepared by MCMA SWO NO. PUBLICATIONS 1. MS 2100 : 2007 2. MS 2101 : 2007 3. MS 2102 : 2007 4. MS 2103 : 2007 5. MS 2104 : 2007 6. MS 2105 : 2007 7. MS 2106 :
More informationProduct Launches at K 2016
CREATING TOMORROW`S SOLUTIONS Product Launches at K 2016 Wolfgang Schattenmann, Director Rubber Solutions Dr. Wolfgang Schattenmann, Rubber Solutions, June 28, 2016 0 of 16 WACKER s Product Launches at
More informationPublic Transportation Materials for a Moving Market
Public Transportation Materials for a Moving Market AKRO-PLASTIC GmbH Member of the Feddersen Group Weight-Reduced Products Gaining Importance for Applications in the Transportation Sector EU guidelines
More informationDELO-DUOPOX AD897 Multi-purpose 2c epoxy resin, cures at room temperature, high-viscous, filled
DELO-DUOPOX AD897 Multi-purpose 2c epoxy resin, cures at room temperature, high-viscous, filled Base - epoxy resin - two-component Use - for the trowelling of welded seams - pasty and run-resistant but
More informationPVC SCHEDULE 40 FITTINGS
PVC SCHEDULE 40 FITTINGS Performance Engineered & Tested 40-2-0604 SPEARS Schedule 40 PVC fitting designs combine years of proven experience with computer generated stress analysis to yield the optimum
More informationEPDM sponge profile formulations: New approach with metallocene elastomers. years
MAY 6 7 years The technical service magazine for the rubber industry Volume 5, No. EPDM sponge profile formulations: New approach with metallocene elastomers by Eric Jourdain, Brian Burkhart and Mark Welker,
More informationA-700. Technical Information. Fluoroelastomers
A-700 Technical Information Introduction Viton A-700* is an A-family gum polymer that has demonstrated easy processing. This gum provides: Good flow for compression molding Good mold release Less mold
More informationGBL-600S. Technical Information. Fluoroelastomers
GBL-600S Technical Information Introduction Viton GBL-600S is a next generation, easy processing, peroxide-cured 68% fluorine fluoroelastomer based on new Advanced Polymer Architecture (APA) technology.
More informationThe HELIXGUARD management looks back at over 3 decades of experience in Worldwide Application oriented Hydraulic industries.
HELI I GUARDG WELCOME TO HELIXGUARD The HELIXGUARD management looks back at over 3 decades of experience in Worldwide Application oriented Hydraulic industries. Recognizing and understanding the importance
More informationnolax is the adhesive scene s farmteam. We sow ideas and visions, let them sprout, and nurture them to market readiness.
nolax is the adhesive scene s farmteam. We sow ideas and visions, let them sprout, and nurture them to market readiness. Another way of thinking Andreas Dobmann nolax Sempach Station, Switzerland PIR -
More informationCable ties. Features Easy to install and remove. Provides protection to the wire bundle. Available in white and black
Features Easy to install and remove. Provides protection to the wire bundle. Available in white and black Applications Fast and economical grouping of wire bundles. Joining groups of wires and/or tubing.
More informationDRISCOPIPE 8100 HDPE PIPE and FITTINGS DATA SHEET
PerfmancePipe.com DRISCOPIPE 8100 HDPE PIPE and FITTINGS DATA SHEET Driscopipe 8100 Pipe and Fittings meet exceed: Driscopipe 8100 Pipe and Fittings f: ASTM D2513, D2683, D3261 ASTM D3350, cell classification
More informationDELO-DUOPOX AD895 Multi-purpose 2c epoxy resin, cures at room temperature, medium-viscous, filled
DELO-DUOPOX AD895 Multi-purpose 2c epoxy resin, cures at room temperature, medium-viscous, filled Base - epoxy resin - two-component Use - high-strength construction adhesive - multi-purpose - the cured
More informationSealing Elements. Technical Handbook O-rings. 22. On-line tools - Conversion Tables
Teflex-VMQ Silicone - Technical Data Sheet 1. Introduction ERIKS Teflex O-Rings (VMQ silicone) are composed of a Silicone elastomer encapsulated in seamless FEP or PFA-cover. The elastomer works as a rubbermaterial
More informationTHE FUNCTIONAL ATTRIBUTES AND UTILIZATION OF BORATES IN LUBRICATION TECHNOLOGY
THE FUNCTIONAL ATTRIBUTES AND UTILIZATION OF BORATES IN LUBRICATION TECHNOLOGY BORON Discovered in 1808 by Sir Humphrey Davy Brittle, black semi metallic substance Tends to form planar compounds THE USE
More informationGASKETS. From compound asbestos free and PTFE sheets, our sealing solutions. INDEX OF GASKETS
GASKETS From compound asbestos free and PTFE sheets, our sealing solutions. COMPRESSED SYNTHETIC FIBRE JOINTING SHEETS Seal X offers a number of asbestos free synthetic fibre jointing sheets designed for
More informationCASE STUDY: TOUGH LOW MASS CLASS A SMC
CASE STUDY: TOUGH LOW MASS CLASS A SMC Edward Zenk Navistar, Inc. David Hearn Core Molding Technologies Kevin Dinan, Robert Seats, & Cedric Ball Ashland Inc. Abstract Fuel is one of the single largest
More informationRelevance of lab-scale conical twin-screw extruder for thermoplastic STARCH/PLA blends rheology study
Relevance of lab-scale conical twin-screw extruder for thermoplastic STARCH/PLA blends rheology study Elodie Chabrat, Antoine Rouilly, Philippe Evon, Antoine Longieras, Luc Rigal To cite this version:
More informationInspiring design innovation
IROGRAN Thermoplastic Polyurethanes Inspiring design innovation Product Overview IROGRAN TPU: Inspiring design innovation The manufacture of modern products, engineering components and technical parts
More informationGreen Polymeric Materials Inc.
Green Polymeric Materials Inc. Recycled Rubber Filled Soy Polyurethane Using Soy And Recycled Tire Rubber To Enhance Clean Automotive Technologies has been in business since 2002 GPMis a manufacturer of
More informationProducts of integrity from people of integrity. w w w. n e w m a n g a s k e t. c o m
Products of integrity from people of integrity. O -RINGS w w w. n e w m a n g a s k e t. c o m 1 How to size your O -Rings Newman Elastomer Characteristics If you don t know the size or number of the O
More informationAKROMID A (PA 6.6) AKROMID B (PA 6) AKROLOY PA CompaDur PBT
P R O D U C T I N F O R M A T I O N B A S I C PR O G R A M AKROMID A (PA 6.6) AKROMID B (PA 6) AKROLOY PA PBT AKRO Engineering Plastics (Suzhou) Co., Ltd. Member of the Feddersen Group Dear AKRO-PLASTIC
More informationnovapress Elastomer-bonded fibre gaskets.
novapress Elastomer-bonded fibre gaskets. GASKETS TECHNICAL TEXTILES EXPANSION JOINTS INSULATION NEW MATERIALS novapress production and quality Quality monitored and maintained by using a process control
More informationB-202. Technical Information. Fluoroelastomers
B-202 Technical Information Introduction Viton B-202* fluoroelastomer is a low viscosity, B-type gum polymer that demonstrates improved processing and rheology when compared with existing fluoroelastomers.
More informationContents. Product Portfolio 03. Product 04. Product Selection Guide 12. Integrated Solution 21. At a Glance 22. Global Network 23
Enjoy Our Excellence & Expertise ABS, ABS Alloy, ASA Contents Product Portfolio 03 Exclusive Product 04 Product Selection Guide 12 Integrated Solution 21 At a Glance 22 Global Network 23 Expertise Excellent
More information+GF+ CLASS 267. Factory Mutual Approved. HDPE Pipe & Pipe Fittings GEORG FISCHER PIPING SYSTEMS centralplastics.
Factory Mutual Approved CLASS 26 HDPE Pipe & Pipe Fittings CENTRAL PLASTICS 8.499.692 Table Of Contents 18-1 Design-Flow HDPE IPS HDPE Pipe (Iron Pipe ) 4-24 18-2 PE 368 HDPE Physical Properties - FM 18-3
More information