Product Launches at K 2016
|
|
- Edward Fisher
- 5 years ago
- Views:
Transcription
1 CREATING TOMORROW`S SOLUTIONS Product Launches at K 2016 Wolfgang Schattenmann, Director Rubber Solutions Dr. Wolfgang Schattenmann, Rubber Solutions, June 28, of 16
2 WACKER s Product Launches at K 2016 Automotive ELASTOSIL LR 3016/65 ELASTOSIL LR 3072/50 Elastomers ELASTOSIL LR 3003/90 ELASTOSIL LR 3020/60 Elastomers ELASTOSIL Color Paste FL UV WACKER Primer G 790 TF Energy POWERSIL 403 Lighting LUMISIL LR 7601 LUMISIL 590 & 591 Plastic Additives GENIOPLAST WPC VINNEX Bioplastics Dr. Wolfgang Schattenmann, Rubber Solutions, June 28, of 16
3 WACKER s Product Launches at K 2016 Close Up Automotive ELASTOSIL LR 3016/65 ELASTOSIL LR 3072/50 Elastomers ELASTOSIL LR 3003/90 ELASTOSIL LR 3020/60 Elastomers ELASTOSIL Color Paste FL UV WACKER Primer G 790 TF Energy POWERSIL 403 Lighting LUMISIL LR 7601 LUMISIL 590 & 591 Plastic Additives GENIOPLAST WPC VINNEX Bioplastics Dr. Wolfgang Schattenmann, Rubber Solutions, June 28, of 16
4 AUTOMOTIVE ELASTOSIL LR 3016/65 ELASTOSIL LR 3072/50 Dr. Wolfgang Schattenmann, Rubber Solutions, June 28, of 16
5 WACKER s Extensive Range of Silicone Elastomer Products is Ideally Suited to Many Automotive Applications Actuator: membranes Additional electric heater: gaskets Vibration dampers, buffers Wiper blades Rain sensor/ camera: coupling cushion Airbag coating Sunroof profiles Interior: switches, light guides, cup holders Fuel cell: gaskets AdBlue systems: heating mats, gaskets Air-circulation: flaps, gaskets Exhaust pipe hangers, dampers Spark plug boots, ignition/battery cables Hybrid cables, connectors Turbocharger hoses radiator hoses Drive shaft couplings Engine/radiator/ intercooler/egr: seals, gaskets ABS/ESP controllers: sealing, vibration decoupling frame oil-system: anti-drain back valves PDC, radar, airbag sensors: gaskets Lighting: seals, lenses Dust covers, CVJ boots Engine mounts Wire harness:connector, multi- cavity seals Car key: keypads Dr. Wolfgang Schattenmann, Rubber Solutions, June 28, of 16
6 ELASTOSIL LR WACKER s Media Resistant Liquid Silicone Rubber Product Range ELASTOSIL Hardness (Shore A) Properties Applications LR Oil resistant, npc low C.S.* Anti drain back valves, O-rings new: LR Oil resistant, npc low C.S.* Gaskets for specific automotive norms LR 3022, Coolant resistant Radiator gaskets LR Coolant resistant, self adhesive Radial seals LR Oil resistant, self adhesive Anti-drain back valves, membranes FLR 3900 (20), FLR High oil & fuel resistant, npc low C.S.* High oil & fuel resistant, oil bleeding, npc low C.S.* Gaskets, membranes Gaskets, membranes *npc low C.S. = non post-cured low compression set Dr. Wolfgang Schattenmann, Rubber Solutions, June 28, of 16
7 ELASTOSIL LR 3016/65 an Oil-Resistant Liquid Silicone Rubber for Challenging Requirements in Specific Automotive Applications Oil Filter Gasket Housing Paper filter Base plate Silicone rubber gasket Requirements Good long-term oil resistance Comply with most recent requirements and specifications of car industry Excellent compression set without post-curing Constant elastic recovery Rapid curing in % Elongation Initial property After oil test* ELASTOSIL LR 3003/70 ELASTOSIL LR 3016/65 Industry Specification * Oil immersion 504 hours, 150 C; Lubrizol OS Dr. Wolfgang Schattenmann, Rubber Solutions, June 28, of 16
8 ELASTOSIL LR 3072/50 Completes WACKER s Portfolio of Self-Adhesive and Oil-Bleeding Liquid Silicone Rubber Solutions Product Benefits of Self bonding Oil bleeding silicone Soft-hard combination of LSR and PA* or PBT** Guarantees correct seal positioning Most reliable sealing solution Reduced coefficient of friction due to oil film formation enables Simplification of assembling Low compression set of 10 %*** (after 22 hours at 125 C) for excellent sealing Applications Connector systems: one-piece LSR plug housing and seal design to prevent entry of moisture and typical automotive fluids * PA = Polyamide ** Polybutylenterephthalate *** acc. to ISO 815-B Dr. Wolfgang Schattenmann, Rubber Solutions, June 28, of 16
9 ELASTOMERS ELASTOSIL LR 3003/90 ELASTOSIL LR 3020/60 Dr. Wolfgang Schattenmann, Rubber Solutions, June 28, of 16
10 ELASTOSIL LR 3003/90 High Modulus Material Solution for Growing LSR Challenges N/mm 2 Stress of LR 3003 Grades* Strain (in %) LR 3003/05 LR 3003/30 LR 3003/50 LR 3003/60 LR 3003/80 LR 3003/90 * Post cured: 4 hours at 200 C in ventilated air Dr. Wolfgang Schattenmann, Rubber Solutions, June 28, of 16
11 ELASTOSIL LR 3003/90 High Modulus Material Solution for Growing LSR Challenges Unique Product Features Ultra high duro: 90 Shore A* 33 Shore D* Coefficient of Friction Selected ELASTOSIL LR 3003 Grades tested on a polished surface** Very high modulus High dimensional stability Excellent liquid injection molding processing Low coefficient of friction significantly less surface friction Applications: Designed and suitable for resin and plastics replacement Hard-soft LSR-LSR solutions -35 % 60 Shore A 70 Shore A 80 Shore A 90 Shore A * Post cured: 4 hours at 200 C in ventilated air ** Graphic shows median data from measurements on a polished stainless steel surface; pulling speed: 100 cm/min., duration: 7 sec. Dr. Wolfgang Schattenmann, Rubber Solutions, June 28, of 16
12 ELASTOSIL LR 3020/60 for Hot Steam and Water Applications Challenging for Manufacturers of Organic Rubber and Silicone Elastomers Parts Change of Properties in Hot Steam (21 days, 150 C) Tensile in % Elongation in % Long-Term Compression Set at 150 C in Hot Steam in %* LR 3003/ LR 3020/ LR 3003/60 LR 3020/ Time / d Product of choice ELASTOSIL LR 3020/60 * Test standard:din ISO 815-B (cylindrical specimen, 6 mm height, 25 % compression) Dr. Wolfgang Schattenmann, Rubber Solutions, June 28, of 16
13 CREATING TOMORROW`S SOLUTIONS LIGHTING LUMISIL LR 7601 Dr. Wolfgang Schattenmann, Rubber Solutions, June 28, of 16
14 LUMISIL LR 7601 A Unique Combination of High Transparency and Elasticity Product Benefits Outstanding optical transparency exceeding transparency of PMMA* or PC** Excellent heat and UV resistance Hardness range 50 to 80 Shore A Mass production of parts (LSR technology) Automotive Applications Lenses for primary and secondary optics (LED, halogen & Xenon lamp technology) Sensors (i. e. Driver Assistance Systems) Interior lighting (i. e. light guide) Optical coupling elements * Polymethyl methacrylate ** Polycarbonate Dr. Wolfgang Schattenmann, Rubber Solutions, June 28, of 16
15 LUMISIL LR 7601 is the Second Generation of High Transparent LSR Succeeding LUMISIL LR 7600 with Improved Performance Linear shrinkage in % LUMISIL LR 7601 Non post-cured post-cured (4 hours at 200 C) LUMISIL 7600/60 LUMISIL 7601/60 Hardness range: 50 to 80 Shore A Refractive index nd 25 : 1.41 Viscosity (D = 1 s -1 ) (mpa s): 29,000 35,000 Improved degassing of raw materials enables less volatiles Less shrinkage Reduced fogging Transparency and heat stability identical to LUMISIL LR 7600 Dr. Wolfgang Schattenmann, Rubber Solutions, June 28, of 16
16 LUMISIL LR 7601 Grades Provide Significantly Improved Transparency Compared to Standard ELASTOSIL LR Grades ELASTOSIL LR 3040/50 (layer thickness: 4 mm) scattering turbidity [nm] LUMISIL LR 7601/50 (layer thickness: 4 mm) no scattering crystal clear [nm] * Transmittance measured against air. ~ 4 % Fresnel loss. Dr. Wolfgang Schattenmann, Rubber Solutions, June 28, of 16
17 WACKER s Product Launches at K 2016 Comming up next... Automotive ELASTOSIL LR 3016/65 ELASTOSIL LR 3072/50 Elastomers ELASTOSIL LR 3003/90 ELASTOSIL LR 3020/60 Elastomers ELASTOSIL Color Paste FL UV WACKER Primer G 790 TF Energy POWERSIL 403 Lighting LUMISIL LR 7601 LUMISIL 590 & 591 Plastic Additives GENIOPLAST WPC VINNEX Bioplastics Dr. Wolfgang Schattenmann, Rubber Solutions, June 28, of 16
18 CREATING TOMORROW`S SOLUTIONS Thank you for your attention Wolfgang Schattenmann, Director Rubber Solutions Dr. Wolfgang Schattenmann, Rubber Solutions, June 28, of 16
SILICONES IN AUTOMOTIVE ENGINEERING
SILICONES IN AUTOMOTIVE ENGINEERING Creating Tomorrow s Solutions AN UNBEATABLE MATERIAL In automotive engineering, pioneering technologies and high-performance components are impossible without state-of-the-art
More informationCREATING TOMORROW S SOLUTIONS MOBILITY. e-novation FOR CABLES AND CONNECTORS POWERED BY SILICONES
CREATING TOMORROW S SOLUTIONS MOBILITY e-novation FOR CABLES AND CONNECTORS POWERED BY SILICONES SILICONE CABLES AND CONNECTORS THE POWER HIGHWAY High-performance, silicone cables are required to be the
More informationCREATING TOMORROW S SOLUTIONS MOBILITY. e-novation FOR POWER CONVERSION POWERED BY SILICONES
CREATING TOMORROW S SOLUTIONS MOBILITY e-novation FOR POWER CONVERSION POWERED BY SILICONES THE BRAIN OF e-mobility Highly-efficient power conversion is a vital process for e-mobility. The direct current
More informationMITRAS MATERIALS GMBH
MITRAS MATERIALS GMBH Friedrich-Ochs-Str. 2 92637 Weiden/Opf. Tel.: 0961 / 89-810 / 89-812 Fax: 0961 / 89-672 Directory of services L a b o r a t o r y MITRAS MATERIALS GMBH Edition 02/18 Rev. 08 page
More informationDELO -ML DB133 anaerobic and UV-curing adhesive
DELO -ML DB133 anaerobic and UV-curing adhesive Base - Modified urethane acrylate - one-component, solvent-free - dual-curing adhesive Use - for impact-resistant metal bondings - for mixed bondings with
More informationWolf Kunststoff ZEDEX ZX-530 A5D Polymer Alloy
Wolf Kunststoff ZEDEX ZX-530 A5D Polymer Alloy Category : Polymer, Thermoplastic Material Notes: Main Characteristics: Low Creep; Low moisture absorption; Flame retardant; Low impurity ions; Good machinability;
More informationDATA SHEET OF COMPASHIELD EE GASKET
DATA SHEET OF COMPASHIELD EE GASKET Introduction Compashield EE gaskets developed by Nolato is extruded in parallel with dual conductive/non-conductive gaskets, provide both optimum EMI and environmental
More informationThere is Merbenit in there. Your industry product.
There is Merbenit in there. Your industry product. Bonding and sealing for industry Merbenit sealants Merbenit sealants and adhesives cure to permanent elastomers. They are suitable for joints and sealed
More informationCrastin PBT Thermoplastic polyester resins
Crastin PBT Thermoplastic polyester resins Product guide and properties Start with DuPont Engineering Polymers DuPont s registered trademark Crastin PBT Thermoplastic polyester resins Introduction CRASTIN
More informationRaw Materials for Pressure-Sensitive Adhesives
Raw Materials for Pressure-Sensitive Adhesives Table of Contents 03 Best adhesion properties for all applications 04 05 Labels 06 Primers for Plastic Films 07 Graphic Films 08 09 Specialty Tapes 10 11
More informationPHASED OUT. LED light engine / OLED LED linear / area. Module LLE G3 16x140mm 325lm ADV, LLE G3 16x280mm 650lm ADV Modules LLE ADVANCED
Product description Ideal for compact linear luminaires designs Homogenous illumination thanks to small package distance Best refurbishment option for T5 lamps Luminous flux range 29 up to 85 lm LED system
More informationElastollan Product Range
Thermoplastic Polyurethane Elastomers (TPU) Elastollan Product Range Elastogran is Polyurethanes Contents Quality management to DIN EN ISO 9001 Page 2 Nomenclature for Elastollan Page 3 Packaging, Storage
More informationSR InfuGreen 810 Green Epoxy systems for Injection and Infusion
Page 1 / 9 SR InfuGreen 810 Green Epoxy systems for Injection and Infusion The InfuGreen 810 is a two-component epoxy system. It has been specially formulated for resin transfer processes, such as injection
More informationQualification of Rubber Reinforcement for Application Inside Car Engines in Oil
Qualification of Rubber Reinforcement for Application Inside Car Engines in Oil MPG Seminar: Rubber - a Resilient Future 3 Elastomers in Extreme Environments 16 May 16 Outline Introduction Overview of
More informationThermx PCT. High-performance Polyester. Product and Properties Guide
Thermx PCT High-performance Polyester Product and Properties Guide Thermx Chemical resistance Processability Dimensional stability Heat resistance Fast molding cycles Thermx PCT polyester is a hightemperature
More informationChallenges For Future Powerplant Coolant Systems
Challenges For Future Powerplant Coolant Systems Steven Mok, Karla Butler, Terrence Cressy, Paul Kane, Brian Fish (Presented at SPE Auto EPCON, April 28, 2009. Sterling Heights, MI) 2 Discussion Agenda
More informationTORQUE HTD - CMT MUSTANG 8M - 14M SYNCHRONOUS BELT - CHD CMT APPLICATIONS KEY FEATURES & BENEFITS BELT MATERIAL.
TORQUE HTD - CMT Performance index These heavy-duty synchronous belts are specifically designed for high torque applications at low speed. TORQUE belts are among the best performing HTD profiled belts
More informationTexin 245 Covestro PUR Thermoplastic Polyurethane Elastomer (Polyester) Action Saturday, October 22, 2016 Units English Legend (Open) General Information Product Description Texin 245 resin is an aromatic
More informationSR GreenPoxy 33 / SZ 8525 Clear epoxy system for compression moulding
Page 1 / 8 SR GreenPoxy 33 / SZ 8525 Clear epoxy system for compression moulding High bio-based carbon content SR GreenPoxy 33 resin is outcoming from the latest innovations in bio-based chemistry. SR
More informationSurface Protective Systems
Surface Protective Systems Technical information Oxydur VEL-SR Mechanical applied electrically conductive laminate system Base Vinyl ester resin Material Group Membranes Tank- / vessel linings - laminates
More informationDELO-DUOPOX AD895 Multi-purpose 2c epoxy resin, cures at room temperature, medium-viscous, filled
DELO-DUOPOX AD895 Multi-purpose 2c epoxy resin, cures at room temperature, medium-viscous, filled Base - epoxy resin - two-component Use - high-strength construction adhesive - multi-purpose - the cured
More informationnovapress Elastomer-bonded fibre gaskets.
novapress Elastomer-bonded fibre gaskets. GASKETS TECHNICAL TEXTILES EXPANSION JOINTS INSULATION NEW MATERIALS novapress production and quality Quality monitored and maintained by using a process control
More informationPLEXIGLAS Sheet Products for Aircraft Transparencies PLEXIGLAS GS 245 PLEXIGLAS GS 249. Aviation
PLEXIGLAS Sheet Products for Aircraft Transparencies PLEXIGLAS GS 245 PLEXIGLAS GS 249 Aviation Business Unit Röhm Plexiglas is the world leader in polymethyl methacrylate sheet products. Our PLEXIGLAS
More informationHigh Performance ABS Products for Automotive Applications
High Performance ABS Products for Automotive Applications ELIX Polymers is a leading manufacturer of ABS (Acrylonitrile-Butadiene-Styrene) resins and derivatives in Europe. Operating from its head office
More informationEpoxy Resin L Unit Value
Technical data Epoxy Resin L + Hardener S, L, CL, EPH 500, W 300, GL 1, GL 2, EPH 573 and EPH 161 Low viscosity, free of solvents and fillers Fast impregnation of glass, aramid, and carbon fibres High
More informationMicrocellular polyurethane as steering coupling element
Microcellular polyurethane as steering coupling element Material specific properties of solutions based on Cellasto -Elastolit-X composite structures Contents Cellasto material specific properties: Classification,
More informationLED light engine / OLED LED linear / area. Module STARK LLE PREMIUM Modules LLE
Module STARK LLE PREMIUM Modules LLE Linear Tunable White LED module with 2,700 and 6,500 K SMT packages High module efficacy up to 125 lm/w at tp = 65 C High colour rendering index CRI > 80 Low tolerances
More informationSurface Protective Systems
Surface Protective Systems Technical information Oxydur UP 410 Laminate TI 216 Laminate system for concrete and steel substrates Base Polyester resin, unsaturated Material Group Membranes Tank- / vessel
More informationGLASS TRANSITION TEMPERATURE (Tg) 65 C >2, , C >2, , C >2, , C 1, ,918 1.
epotek.com Optical Epoxy Technology s extensive line of optical adhesives is used for bonding and coating in many applications; most commonly in fiberoptics. Our epoxy adhesives are frequently used to
More informationPHASED OUT. LED light engine / OLED LED linear / area. Umodule STARK LLE umodule LLE ADVANCED
Ideal for linear and panel lights Luminous flux range 1, up to 1,300 lm LED system solution with outstanding system efficiency up to 111 lm/w, consisting of linear LED modules and dimmable LED Driver LCAI
More informationPolyamide 6 & 66 for Injection Moulding
Polyamide 6 & 66 for Injection Moulding Promyde is a trademark of NUREL 1 NUREL Engineering Polymers Polymerization Integrated into In-House Compounding 50 years experience in polymerization processes
More informationMaterial Selection Guide
Material Selection Guide Markets Communications Computers Transportation Electronics Appliances Medical Devices Industrial Applications LCD Gaskets Battery Pressure Pads Speaker Gaskets Environmental Seals
More informationPOLYCAST CELL CAST ACRYLIC Solutions for Aerospace
POLYCAST CELL CAST ACRYLIC Solutions for Aerospace Delivering aircraft transparencies for the demanding aerospace industry. cast cell cast acrylic has been manufactured and trusted by the aerospace industry
More informationGeomembrane Test Methods
Appendix 2 Geomembrane Test Methods AMERICAN SOCIETY FOR TESTING AND MATERIALS (arranged by number) ASTM D-5 ASTM D-36 ASTM D-256 ASTM D-412 ASTM D-413 ASTM D-471 ASTM D-570 ASTM D-638 ASTM D-696 ASTM
More informationDELO-DUOPOX AD897 Multi-purpose 2c epoxy resin, cures at room temperature, high-viscous, filled
DELO-DUOPOX AD897 Multi-purpose 2c epoxy resin, cures at room temperature, high-viscous, filled Base - epoxy resin - two-component Use - for the trowelling of welded seams - pasty and run-resistant but
More informationTECHNYL A 218 BLACK 21N
TECHNYL A 218 BLACK 21N Description TECHNYL A 218 Black 21 N is an unreinforced polyamide 66, standard viscosity, heat stabilized for injection moulding.it is available in black color. Key Properties Chemical
More informationLED light engine / OLED LED linear / area. Umodule STARK LLE-G CLASSIC EM STARK LLE
Umodule STARK LLE-G3-24-28-12 CLASSIC EM STARK LLE Product description Ideal for linear and panel lights Luminous flux range 1,13 up to 1,64 lm Combined LED module for general and emergency lighting Integrated
More informationWe Compound your Solutions Automotive presentation vers /05-1
We Compound your Solutions Automotive presentation vers6. 2006/05-1 Company presentation Automotive Market We Compound your Solutions Automotive presentation vers6. 2006/05-2 Multibase group Manufacturing
More informationLED light engine / OLED LED linear / area. Umodule STARK LLE-G CLASSIC STARK LLE
Umodule STARK LLE-G3-24-28-2 CLASSIC STARK LLE Product description Ideal for linear and panel lights Luminous flux range 1,45 up to 2,11 lm LED system solution with outstanding system efficacy up to 129
More informationPolyamide 6 for Injection Moulding
Polyamide 6 for Injection Moulding Promyde is a trademark of NUREL 1 NUREL Engineering Polymers Excellence in Polymerization Recent technical advancements in NUREL polymerization processes have enabled
More informationTechnology for Safe and Lightweight Automobiles
AUTOMOTIVE Plastics Application Technology for Safe and Lightweight Automobiles Sudhakar R. Marur Table of Contents Preface...xv Chapter 1 Introduction to Plastics Application Technology... 1 1.1 Introduction...1
More informationPneumatic Seals 1/2 Pneumatic Seals 2/2. Pneumatic Seals
Seals Seals * 1 Mpa = 10 Bar 1 Bar = 14.5 psi 1 Mpa = 145 psi Combination Wiper/Rod Seal This pneumatic rod seal/wiper Set profile is fitted into housings with a circlip recess according DIN 7993 (type
More informationComparison of IG Testing Standard. IGMA Summer Meeting August 8, 2004
Comparison of IG Testing Standard IGMA Summer Meeting August 8, 2004 1 The Task Compare the new Harmonized standards to: Old ASTM stds. Canadian stds. CEN stds. (Europe) ISO std. (proposed) 2 The Standards
More informationTunable White LED linear / area. Module LLE G2 PREMIUM LLE PREMIUM
Module LLE G2 PREMIUM LLE PREMIUM Product description Linear Tunable White LED module with 2,700 and 6,500 K SMT packages Ideal for linear and panel luminaires Optimal solution for Tunable White applications
More informationLED modules LED linear / area
Module STARK LLE-G3-24-140-650, LLE-G3-24-280-1250-SELECT Modules LLE excite Product description Ideal for linear and panel lights Luminous flux range 530 up to 1,430 lm LED system solution with outstanding
More informationLED light engines LED linear / area
Module LLE 24mm 2lm EXC Modules LLE EXCITE Product description Ideal for linear and panel lights in industrial applications Reliable, high lifetime solution and extended temperatur range in combination
More information14. Silicones in Transportation: Automotive and Aviation A. Mountney, Dow Corning Ltd, Barry (Wales)
14. Silicones in Transportation: Automotive and Aviation A. Mountney, Dow Corning Ltd, Barry (Wales) Silicones, particularly silicone rubbers, have found use in a wide variety of transportation applications.
More informationCIMEC Technologies Pvt. Ltd., 23/H, Meldi Estate, Gota, Ahmedabad, Gujarat. Discipline Mechanical Testing Issue Date
Last Amended on - Page 1 of 9 I. BUILDINGS MATERIALS 1. Cement & Pozzolanic Material Fineness (Dry Sieving) IS 4031(Part 1): 1996 (RA 2011) 10 % to 100 % Fineness (Blain Air Permeability) IS 4031(Part
More informationBuffer elements 1109
Buffer elements 1109 Technical information for rubber-metal buffers Our rubber-metal buffers are simple and cost-efficient standard units for elastic mounting. They are ideally suited for compressive and
More informationDraft Indian Standard Specification for Rubber Gaskets (First Revision of IS : 1984) ICS , ,
For BIS Use Only Draft Indian Standard Specification for Rubber Gaskets (First Revision of IS 11149 : 1984) ICS 23.040.80, 83.060, 83.140.50 Not to be reproduced without the permission of Last date for
More informationSALES QUOTE. Prepared for: Reference Number: SA-II-2 BUYER:
Prepared for: Reference Number: 20160604-SA-II-2 BUYER: EMAIL SELLER: STARK ARMORING Contact person: Irina Ivanov 11 Vanley Crescent, Unit 3 Toronto ON, M3J 2B7 CANADA Office: +1(416) 630-9900 Mobile:+1(705)
More informationFree-Form Optics. Heavy Duty Bulb. Heavy Duty Mounts
Free-Form Optics Nordic Lights through their expertise in lens and reflector technology offer a range of light patterns to satisfy the varied and specialist lighting requirements of the mining, heavy duty
More informationSeals On Demand engineered, machined, delivered.
SEALS ON EMAN Seals On emand engineered, machined, delivered. Hercules Seals On emand offers you a wide selection of custom, cost-effective sealing solutions, using advanced rapid-prototype technology.
More informationSinclair Collins. Process Control Valves. For Steam, Hot and Cold Liquids -40 to 450 F up to 500 psi. Catalog SCV-100/USA April 2001
Sinclair Collins Process Control Valves For Steam, Hot and Cold Liquids -40 to 450 F up to 500 psi April 2001 The Diaphragm Operated Valves on the following pages are designed for directing, diverting
More informationSMALL PROTECTIVE VENT
Accessories (Optional Parts) PMF-6B SMALL PROTECTIVE VENT Small and screw-in protective vent suitable for compact, and hand-held type devices. IP6 protection class (water depth meters / 60 mins) and -40
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18869-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 30.08.2013 to 29.08.2018 Holder of certificate: ilf
More informationSurface Protective Systems
Surface Protective Systems Technical information Oxydur VEL-U Laminate system for concrete and steel substrates Base Vinyl ester resin Material Group Membranes Tank- / vessel linings - laminates Description
More informationTOP DRIVE - HTD - CHD 3M - 5M - 8M - 14M APPLICATIONS KEY FEATURES & BENEFITS BELT MATERIAL. Office-ATM machines
TOP DRIVE - HTD - CHD Performance index TOP DRIVE HTD belt is an evolution of standard positive drive belts. The tooth shape is the HTD profile according to ISO 13050. This profile has been used for many
More informationNeopolen P 9230 ESD. Bulk density 1) Average Average Color 2) particle size particle weight [ kg/m 3 ] [ mm ] [ mg ]
= registered trademark of BASF SE Neopolen P 9230 ESD Product Description Neopolen P 9230 ESD is expanded Polypropylene supplied in the form of beads. The cells are largely closed. Table 1: Bulk density
More informationVOLKSWAGEN COMMERCIAL VEHICLES Specifications / March The Multivan
VOLKSWAGEN COMMERCIAL VEHICLES Specifications / March 2010 The Multivan 01 Comfortline Highline FEATURES AND OPTIONS S = Standard O = Optional Extra Not Available Safety and Security Driver's and front
More informationENGINE COOLING Click on the applicable bookmark to selected the required model year
ENGINE COOLING - ENGINE COOLING General Information/ Service Specifications/Lubricant/Sealants GENERAL INFORMATION 0000 The cooling system is designed to keep every part of the engine at appropriate temperature
More informationLED light engines LED linear / area
Module LLE G4 24mm 1250lm ADV Modules LLE ADVANCED Product description Ideal for linear and panel lights SELV module the single module has a forward voltage < 60 V Terminals 2 variants: 2 terminals for
More informationCLASSICA Imperial pitch - CD MXL - XL - L - H - XH SYNCHRONOUS BELT - - CHD CD APPLICATIONS KEY FEATURES & BENEFITS BELT MATERIAL.
CLASSICA Imperial pitch - CD Performance index The CLASSICA synchronous belt, being designed with imperial pitch, is a valid and economical alternative solution in low/medium torque transmission systems.
More informationComponents: Dimensions / Order Codes
Light Series LB Components: Dimensions / Order Codes Clamp Body Single Design ø D 2 B ø D 3 H S ø D 1 L2 L3 Order Codes Clamp Body Standard Materials Polypropylene Colour: Black Material code: PP Polyamide
More informationRemoving and installing front windscreen
51 31 000 Removing and installing front windscreen To bond windshield: Adhesives for cold and hot working are permitted. Remove interior rearview mirror, refer to 51 16 060. If necessary, remove rain sensor,
More informationStruktol Rubber Lab. Project January 14, 2004
Producers of Specialty Chemicals Struktol Company of America 201 E. Steels Corners Road P. O. Box 1649 Stow, Ohio 44224-0649 Struktol Rubber Lab Project 03039 January 14, 2004 Subject: Determine if the
More informationLED light engines LED linear / area
Module LLE G4 24mm 650lm ADV Modules LLE ADVANCED Product description Ideal for linear and panel lights SELV module the single module has a forward voltage < 60 V Terminals 2 variants: 2 terminals for
More informationJLG UTILITY VEHICLES
JLG UTILITY VEHICLES 1 MORE MATERIALS. MORE PEOPLE. ONLY IN YOUR JLG UTV. With a rugged design, heavy-duty drive system and class-leading cargo capacity, JLG utility vehicles outlast the competition and
More informationLED light engine / OLED LED linear / area. Module LLE PREMIUM CRI90 LLE PREMIUM
Module LLE PREMIUM CRI90 LLE PREMIUM Linear Tunable White LED module with 2,700 and 6,500 K SMT packages High module efficacy up to 122 lm/w at tp = 65 C High colour rendering index CRI > 90 Low tolerances
More informationSealon Adhesive PTFE Gasket Tape. Technical Data Sheet
Page 1 of 6 is a versatile, easy to use sealing tape that lets you make your own gaskets in an instant. It s made from expanded PTFE which makes it very easy to shape and allows it to compress with only
More informationZurcon U-Cup RU /*"-8#+-8 " (&*$8 " %*+(+$4
Zurcon U-Cup RU9 Your Partner for Sealing Technology Trelleborg Sealing Solutions is a major international sealing force, uniquely placed to offer dedicated design and development from our market-leading
More informationBLUESIL RTV 3720 A & B RTV 3720 SC A & B
Moldmaking Cancels and replaces SIL 09 190 3 BLUESIL RTV 3720 A & B RTV 3720 SC A & B Description The BLUESIL RTV 3720 A&B is a two component silicone elastomer which cures at room temperature by a polyaddition
More informationDELO-DUOPOX AB8390 Multi-purpose 2c epoxy resin, cures at room temperature, high-viscous, filled
DELO-DUOPOX AB839 Multi-purpose 2c epoxy resin, cures at room temperature, high-viscous, filled Base - epoxy resin - two-component, thixotropic Use - high-strength construction adhesive - multi-purpose
More informationComponents: Dimensions / Order Codes. Clamp Body * *1*06*PP * * * * Clamp Body. ød2. Pipe / Tube / Hose Bore (1 Clamp Body)
ød Components: Dimensions / Order Codes Clamp Body ød B H L L L Clamp Body Colour: Green Material code: PP Colour: Black Material code: PA See page A88 for material properties and technical information.
More informationNEW APPLICATION TECHNOLOGIES IN PHENOLIC MOLDABLE COMPOSITES
NEW APPLICATION TECHNOLOGIES IN PHENOLIC MOLDABLE COMPOSITES 1. Why PF-GF have an increasing share of new engine components Plastics are replacing metal parts for a wide range of uses in the automotive
More informationTABLE OF CONTENTS. Remember ROGERS for Rubber & Plastic page 2
TABLE OF CONTENTS BUTYL RUBBER... 4 BUTYL RUBBER SHEETS 60 SDH... 4 BUTYL RUBBER ROLLS 60 SDH... 4 EPDM RUBBER... 5 EPDM RUBBER SHEETS 60 SDH... 5 EPDM RUBBER ROLLS... 5 HYGIENIC WHITE RUBBER... 6 HYGIENIC
More informationIndustrial LED lighting ENERGY SAVING
www.disano.it Industrial lighting ENERGY SAVING 2 Industrial lighting Echo Led The best of the technology applied to a product that has been a leader in the market for years thanks to the exceptional quality
More informationinnovative and powerful Medical lamps
Type list valid from 1 November 2016 innovative and powerful Medical lamps Halux Medical lamps Medical lamps Whether for doctor s practices, clinics, nursing homes or cosmetics studios - the high quality
More informationAR-GLAS. Tubing and Rod of Special Glass
Tubing and Rod of Special Glass SCHOTT is a leading international technology group in the areas of specialty glass and glass-ceramics. With more than 130 years of outstanding development, materials and
More informationParking Aids Reverse camera INTERIOR
Pajero GLX 5 Door SUV, 7 Seat Diesel 2018 MY (Manual) MECHANICAL Fuel System Fuel tank capacity (L): 88 Fuel consumption (ADR 81/02 litres per 100 km): 9.1 1 Type: Common Rail Direct Injection Fuel type:
More informationTECHNICAL SPECIFICATIONS
ROMPOX 1107 ESD coating Solvent free, electrically volume conductive, pigmented, 2 component epoxy resin system with formulated amine hardener acc. to DIN 61340 Areas of application: ROMPOX 1107 ESD coating
More informationLow-torque Deep-groove Ball Bearings for Transmissions
New Product Low-torque Deep-groove Ball Bearings for Transmissions Katsuaki SASAKI To achieve low fuel consumption in response to environmental concerns, we have focused on reducing the friction of tapered
More informationDELO -PUR 9692 Multi-purpose 2c polyurethane, cures at room temperature, high-viscous, filled
DELO -PUR 9692 Multi-purpose 2c polyurethane, cures at room temperature, high-viscous, filled Base - polyurethane - two-component Use - for the bonding of metal, plastic and sometimes even elastomers -
More informationProduct range Power transmission belts
Product range Power transmission belts flat belts Siegling total belting solutions 2 Siegling Extremultus exceptional power transmission Contents We have developed the Siegling Extremultus power transmission
More informationPrecision ball screws
Recirculating ball screws Precision ball screws Thomson Linear Motion. Optimized. Linear Motion. Optimized. The ideal solution often is not found in the fastest, most robust, most precise or even the most
More informationTYPE 4 AND TYPE 2 SAFETY LIGHT CURTAINS WATERTIGHT ENCLOSURES
TYPE 4 AND TYPE 2 SAFETY LIGHT CURTAINS WATERTIGHT ENCLOSURES and and versions IP 69K WATERTIGHT ENCLOSURE, WITH OR WITHOUT HEATING SYSTEM MAIN CHARACTERISTICS Watertight enclosures allow light curtains
More informationLED light engines LED linear / area
Module LLE G4 24mm 1250lm ADV Modules LLE ADVANCED Product description Ideal for linear and panel lights SELV module the single module has a forward voltage < 60 V Terminals 2 variants: 2 terminals for
More informationTurbidity and Suspended Solids Transmitter
Data Sheet 5.1 We reserve the right to continuously improve our products and make any change in the stated specifications and dimensions without prior notice. DK: NO: SE: NL: USA: AUS: +45 45 56 06 56
More informationEDELSTAHL. Kämmer Series Aseptic and Sanitary Valves
EDELSTAHL Aseptic and Sanitary Valves 1 51917.p65 1 4/16/0, :29 PM The Kämmer 191000 Series product line provides control valve solutions for sanitary and aseptic process systems. These valves meet the
More informationEFFECT OF TYRE OVERLOAD AND INFLATION PRESSURE ON ROLLING LOSS & FUEL CONSUMPTION OF AUTOMOBILES CARS
EFFECT OF TYRE OVERLOAD AND INFLATION PRESSURE ON ROLLING LOSS & FUEL CONSUMPTION OF AUTOMOBILES CARS D.MADHUSUDHANA 1 C. NAGARAJA 2 PG Student Assistant Professor Dept. of Mechanical Engineering Dept.
More informationTL12V-2 COMPACT TRACK LOADER. Operating Weight: 5,985 kg. From World First to World Leader
COMPACT TRACK LOADER TL12V-2 From World First to World Leader Operating Weight: 5,985 kg Product Features && Specifications ENGINE - EU Stage IV / EPA Tier 4 Emission Compliant - Turbocharged and Intercooled
More informationInspiring design innovation
IROGRAN Thermoplastic Polyurethanes Inspiring design innovation Product Overview IROGRAN TPU: Inspiring design innovation The manufacture of modern products, engineering components and technical parts
More informationFuses FUSE BOX LOCATIONS. Engine compartment fuse box
FUSE BOX LOCATIONS Engine compartment fuse box 1 2 LAN2333 Remove the plastic cover by pressing the tabs. The fuse values and locations and the circuits protected are shown on the plastic cover. LAN2332
More informationZAXIS-5 series SUPER LONG FRONT. ZX85US-5B 34.1 kw (45.7 HP) kg. Model Code Engine Rated Power Operating Weight
ZAXIS-5 series SUPER LONG FRONT A P P L I C A T I O N & A T T A C H M E N T Model Code Engine Rated Power Operating Weight ZX85US-5B 34.1 kw (45.7 HP) 9 170-9 340 kg SPECIFICATIONS ENGINE Model... Yanmar
More informationDatasheets - General Purpose Elastomers
Datasheets - General Purpose Elastomers Natural Rubber (NR) Market introduction 1840 Price indication, volume index compound 1,0 Service temperature, min C -50 Service temperature, max C +80 Mechanical
More informationPlastic Repair. Characteristics This product hardens well at room temperature. Is odourless. The hard and flexible have a black colour.
Plastic Repair Bardahl Plastic Repair is a 2-component repair product that can be used in all car workshops. Arranged there where plastic and metal must be repaired. Bardahl Plastic Repair has been developed
More informationKRAFFT s SOLUTIONS FOR TRANSPORTATION INDUSTRY
KRAFFT s SOLUTIONS FOR TRANSPORTATION INDUSTRY SEALANTS AND ADHESIVES PU STRUCTURAL ADHESIVES NOVATTANE 3100 High performance structural 2-components polyurethane. It is a highly performing adhesive for
More informationR1000/R3000/R4000/R8000 Series
Regulator R/R/R/R Series Compact pressure gauge integrated type : Rc/ to Rc JIS symbol CAD DATA AVAILABLE. Specifications Descriptions R R R R Appearance Working fluid Max. working pressure Withstanding
More informationGLASS TRANSITION TEMPERATURE (Tg) LAP SHEAR STRENGTH (PSI ) 65 C >2, , C >2, , C >2, ,946 1.
epotek.com Optical Epoxy Technology s extensive line of optical adhesives is used for bonding and coating in many applications; most commonly in fiberoptics. Our epoxy adhesives are frequently used to
More information2.5i 2.5i-L 2.5i-S Lineartronic Engine. Dimensions & weight Overall length mm Overall width mm 1795 Overall height mm 1735 Wheelbase mm 2640
SPECIFICATIONS Symmetrical AWD (All-Wheel Drive) Engine Type Horizontally opposed, 4-cylinder, 4-stroke, petrol engine DOHC 16-valve Bore/Stroke mm 94.0 90.0 Capacity cc 2,498 Compression ratio 10.3 Fuel
More information