Ahmedabad Textile Industry s Research Association (ATIRA), P.O. Ambawadi Vistar, Ahmedabad, Gujarat
|
|
|
- Emerald Summers
- 5 years ago
- Views:
Transcription
1 Last Amended on - Page 1 of 13 I. TEXTILE MATERIALS 1. Fibre Micronaire Length Length uniformity Strength Elongation% Short fibre % Colour Whiteness (Rd) Colour Yellowness (+b) Neps/g Neps size SCN/g SCN size Length Fibre Fineness Maturity ratio Immature Fibre Content Short Fibre Content (w, N) ASTM D 5867 : 12 ISO 4913 : 1981 IS 233 (Part 4) 1978 (Reaffirmed 1999) STP/TT/Fi/1 (based on Uster Standard Test Method) ASTM D 5866 : 12 STP/TT/Fi/2 (based on Uster Standard Test Method) (1.5 to 8) microgram/25.4 mm 3 mm to 45 mm 48 % to 95 % 1 g/tex to 50 g/tex 2 % to 20 % (0 to 50) % 40 to 85 4 to 18 (1 to 999) neps/g (450 to 1500) μ (1 to 999) neps/g (450 to 1500) μ 3 mm to 45 mm 40 mtex to 315 mtex 0.5 to % to 10 % 1 % to 50 % Total Trash ASTM D 2812 : 07 IS 4871 : 1968 (Reaffirmed 1999) 0.05 gm to 50 gm Single Fibre Length Measurement BISFA Standard 1998 ISO 6989 : 1981 IS (Part 1) : mm to 200 mm
2 Last Amended on - Page 2 of 13 Fibre Fibre Denier (Gravimetric Method) (Reaffirmed 1999) ASTM D 1577 : 07 IS 234 : 1973 (RA 1999) ISO 1973 : d to 10 d Single fibre breaking Strength & Elongation % ASTM D 3822 : 07 (2014) IS 235 : 1989 (RA 1995) ISO 5079 : gf to 1000 gf (0.5 cn to 10 N) 2 % to 60 % No. of Crimps/mm ASTM D 3937 : 12 (option 2) (1 to 25) arcs/25mm 2. Yarn Yarn Uneveness (U%) ISO : 2004 ASTM D 1425/ D1425M-09e1 1 to 50 Imperfections/Km (Thin, Thick & Neps), Cvm%, Spectrogram Yarn Linear Density ISO : 2004 STP/TT/Y/7 (based on Uster Standard Test Method 1997) ASTM D 1907/D1907M-12 IS 1315 : 1977 (RA 1999) ISO 2060 : 1994 (0 to 9999) per 400 m (0.05 s to 130 s ) CC Lea Strength ASTM D 1578 : 93 (2011) (Reapproved 2006) IS 1671 : 1977 (RA 1999) ISO 6939 : N to 5 kn (10 kgf to 500 kgf) Classification of long length rare occurring faults (Classimate Quantum Analysis) ASTM D 6197 : 99 (Reapproved 2011) (0 to 99999) Nos.
3 Last Amended on - Page 3 of 13 Yarn Single Yarn Strength & Elongation % STP/TT/Y/11 (based on Uster Standard Test Method 1999) 0.1 N to 990 N (0.01 kgf to 99 kgf) 1 % to 70 % Single yarn Twist ASTM D IS 832 : 1985 (RA 1999) ISO : TPM to 2400 TPM (1 TPI to 60 TPI) 3. Yarn & Chords Single Yarn Strength & Elongation % ASTM D 2256/D2256M-10(e1) IS 1670 : 1991 (RA 1996) ISO 2062 : N to 900 N (0.01 kgf to 90 kgf) 1 % to 100 % 4. Double yarn/ Filament Yarn Twist ASTM D 1423 : 02 (Reapproved 2008) IS 832 : 1985 Edition 2.2 ( ) ISO 2061 : TPM to 2400 TPM (1 TPI to 60 TPI) 5. Fabric/Garment Weight per Unit Area ASTM D 3776/D3776M-09a (2013) (Option C) IS 1964 : 2001(RA 2006) ISO 3801 : g/m 2 to 6000 g/m 2 Threads per unit length in woven fabrics Stitch density/knitted Fabric Construction ASTM D3775 : 12 IS 1963 : 2004 ISO : 1984 ASTM D 3887 : 96 (Reapproved 2008) (20 to 1574) per dm (5 per inch to 400 per inch) (20 to 1000) per dm
4 Last Amended on - Page 4 of 13 Fabric/Garment Count of Warp/Weft ASTM D 1059 : 01 IS 3442 : 1980 ISO : 1984 (1 to 200) Ne Crimp of warp and weft yarn removed from fabric Twist of yarn removed from fabric IS 3442 : 1980 ISO : 1984 ASTM D (2012) ASTM D 1422/D1422M-99 (2013) ASTM D 1423 : 02 (2008) IS 832 : 1985 : Edition 2.2 ( ) ISO : 1984 (0 to 60) % For Single & Double yarn: (4 to 2400) TPM (1 to 60) TPI Width of fabric ASTM D3774 : 96 (2012) IS 1954 : 1990 (RA 1996) ISO : mm to 3 m Tensile Strength & Elongation (Strip Test) ISO : 2013 IS 1969 : 1985 ASTM D N to 30 kn (10 kgf to 3000 kgf) Tensile Strength (Grab Test) ISO : 2013 ASTM D 5034 : 09 (2013) IS 1969 : 1985 Tear Strength (Elmendorf) ISO : 2000 ASTM D (2013) IS 6489 : 1993 (RA 2006) 100 N to 5 kn (10 kgf to 500 kgf) 320 gms to 5200 gms
5 Last Amended on - Page 5 of 13 Fabric/Garment Tongue (Trouser shape) Tear (Single) ISO : 2000 ASTM D 2261 : 13 EN 388 : N to 30 kn (10 kgf to 3000 kgf) Tongue Tear (Double) ISO : N to 30 kn (10 kgf to 3000 kgf) Wing rip Tear ISO : N to 30 kn (10 kgf to 3000 kgf) Trapezoidal Tear ASTM D 5587 : N to 30 kn (10 kgf to 3000 kgf) Seam Performance (Seam Strength and Seam Slippage) Drape Coefficient Abrasion Resistance (Martindale) ASTM D 434 : 95 ASTM D 1683/D1683M-11a ISO : 2014 ISO : 2014 ISO : 2004 ISO : 2004 ISO : 2008, Method A IS 8357 : 1977 (RA 1999) EDANA ISO (1) : 1998 ISO (2) : 1998 ISO (3) : 1998 ISO (4) : 1998 ASTM D 4966 : 2012 IS : 1989 (RA 1995) EN 388 : N to 30 kn (10 kgf to 3000 kgf) 0 to 100 Qualitative (100 to ) rubs g to 10 g Grade 1 to 5 (100 to ) rubs (100 to ) rubs (1 to 2000) rubs
6 Last Amended on - Page 6 of 13 Fabric/Garment Pilling Resistance (Martindale) ISO : 2000 ASTM D 4970/4970M-10e1 Grade 1 to 5 Pilling Resistance (Pill Box) ISO : 2000 IS : 1984 (RA 1993) Grade 1 to 5 Crease recovery by measuring angle of recovery ISO 2313 : 1972 IS 4681 : 1981 (RA 1999) AATCC to 180 (in one direction) Measurement of Skew, Bow and Spirality ASTM D 3882 : 08 (2012) - 50 % to 50 % Air Permeability ISO 9237 : 1995 ASTM D 0737 : 04 (2012) IS (RA 1999) EDANA : 99 ISO : 2007 (1 to 10000) l/m 2 /s Water Resistance : Hydrostatic Head Test ISO 811 : 1981 EN AATCC EDANA ISO : 2007 (1 to 2000) mbar Water Repellency (Spray Test) ISO 4920 : 2012 AATCC IS 390 : 1975 (RA 1997) Absorbency AATCC IS 2349 : 1963 ISO 1 to 5 AATCC (0, 50, 70, 80, 90, 100) (1 to 60) s
7 Last Amended on - Page 7 of 13 Fabric/Garment Oil Repellency AATCC 118 : 2013 ISO : 2010 Grade 1 to 8 Water Repellency (Cone Test) IS 7941 : 1976 (0 to 400) ml Dimensional Stability to domestic laundry Dimensional Stability after immersion in water Dimensional Stability after exposure to heat Dimensional Stability to Dry Cleaning Spirality/Skewing of Fabrics & Garments Vertical Flammability: Ease of Ignition of Vertically oriented Specimen ISO 5077 : 2007 ISO 6330 : 2012 AATCC 135 : 2012 AATCC 150 : 2012 IS 1299 : 1984 ISO 7771 : 1985 AATCC 99 : 2004 IS 2977 : 1989 (RA 2000) IS : 1986 Annexure B & Annexure C (RA 1997) ISO 3759 : 2011 ISO : 2010 AATCC IS (Part 2) Annex C: 2006 AATCC ISO : 2005 ISO 6940 : 2004 IS : 2005 IS : 2005 (Part 3) -50 % to 50 % -50 % to 50 % -50 % to 50 % -50 % to 50 % -50 % to 50 % (0 to 60) minutes
8 Last Amended on - Page 8 of 13 Fabric/Garment Vertical Flammability: Flame Spread Properties of Vertically Oriented Specimen ISO 6941 : 2003 BS 5438 : 1989 (1A & 2A) IS : 2005 (Part 4) IS : 2006 (Part 2) IS : 1986 Procedure A (RA 1999) ASTM D 6413/D6413M-13(b) EN 407 : 2004 (Sec 6.3) For after flame and after glow : (0 to 60) minutes For Char Length : 0 mm to 300 mm 6. Protective Clothing/ Garment/Accessories 45 Flammability ASTM D 1230 : CFR 1610 IS : 1986 Procedure B (RA 1999) Horizontal Flammability ISO 3795 : 1989 ASTM D 5132 : 11 IS : 2002 SAE J 369 : 2003 Limited Flame Spread ISO : 2000 EN 532 : 1995 EN 533 : 1997 IS : 2007 (Part 4) Convective Heat Resistance ISO 9151 : 1995 IS : 2007 (Part 1) (0 to 60) minutes (0 to 60) minutes For after flame and after glow : (0 to 60) minutes For Char Length : 0 mm to 200 mm (0 to 60) minutes Radiant Heat ISO 6942 : 2002 (0 to 60) minutes IS : 2007 (Part 2) EN 702 : 1995 Protective Clothing/ Heat Transfer ISO : % to 50 %
9 Last Amended on - Page 9 of 13 Garment/Accessories NFPA 1975 : 2014 (Section 8) Contact heat transmission ISO : 2007 (0 to 60) minutes 7. Protective Clothing (Gloves) Puncture Resistance EN 388 : 2003 (Sec 6.4) 100 N to 5 kn (10 kgf to 500 kgf) Blade Cut Resistance (Index) EN 388 : 2003 (Sec 6.2) 0 to Hi-Vi Fabric/ Garment (Reflective Material) Coefficient of Retro-reflection DIN EN ISO : 2013 EN 471 : 03 (2008) EN 1150 : 1999 (10 to 2000) cd.lx-1.m Protective Clothing /Garment/ Electro static Material Surface Resistance and Surface Resistivity EN : ohms to ohms Electrical Resistance (Vertical Resistance) EN : ohms to ohms 10. Textile Material Moisture Content Moisture Regain ISO : 1989 ASTM D 2654 : 89a IS 199 : 1989 (RA 1994) 0% to 50% Thermal Resistance ISO : 1993 ASTM F 1868 : 14 NFPA 1971 : to Textile Material Water Vapour Resistance ISO : 1993 (0.01 to 100) Ref
10 Last Amended on - Page 10 of 13 ASTM F 1868 : 14 NFPA 1971 : 2001 [Ref : Fabric Thermal Resistance (m 2. C/W)] 11. Geo-Textile/ Non woven Material Weight ISO 9864 : 2005 ASTM D (Reapproved 2003) ISO : 1989 EDANA 40.3 : 90 Tensile Strength (Strip Test) ISO : 1989 ASTM D 5035: 11 (Reapproved 2008) 10 g/m 2 to 6000 g/m 2 10 kgf to 3000 kgf (100 N to 30 kn) Tensile Strength (Grab Test) ASTM D 4632 : 08 (Reapproved 2003) (Geo) ISO : kgf to 3000 kgf (100 N to 30 kn) Trapezoidal Tear ASTM D 4533 : 11 (Geo) ISO : 1997 IS : 1995 EDANA 70.4 : kgf to 3000 kgf (100 N to 30 kn) Wide Width Tensile Properties ISO : 2008 ASTM D 4595 : kgf to 3000 kgf (100 N to 30 kn) UV Resistance ASTM D 4355 : kgf to 3000 kgf (100 N to 30 kn) Index Puncture Resistance ASTM D 4833 : kgf to 50 kgf (10 N to 500 N) Geo-Textile/ CBR Puncture ISO : kgf to 3000 kgf
11 Last Amended on - Page 11 of 13 Non woven Material ASTM D (2009) (100 N to 30 kn) Water permeability by permittivity Nominal Thickness at Specified Pressures ASTM D 4491 : 99a (2009) ISO : 2010 ASTM D 5199 : 12 ISO 9863 : 1, Method A 1 mm/s to 100 mm/s (0.05 to 60) /s 0.05 mm to 20 mm (0.5 kpa & 2 kpa Pressure) Tensile Properties of Geogrids ASTM D 6637 : kgf to 5000 kgf (100 N to 50 kn) II. PLASTICS, RUBBER AND LEATHER 1. Unreinforced and Reinforced Plastics Tensile Properties of Plastics ASTM D638 : 10 ISO : 1997 ASTM D3039 : 08 (1 to 4000) MPa Compressive Properties of Rigid Plastics ASTM D695 : 10 ISO 604 : 2002 (1 to 20000) MPa Flexural Properties ASTM D790 : 10 ISO : 1998 Method-A, Amendment 1 : 2011 ISO 178 : 2010 Amendment : 2013 (5 to 2000) MPa Izod Pendulum Impact Resistance ASTM D256 : 10 ISO 180 : 2000 Amendment 2 : 2013 (5 to 700) kj/m 2
12 Last Amended on - Page 12 of 13 Unreinforced and Reinforced Plastics Charpy Impact properties: Non-instrumented Impact Test ISO : 2010 (10 to 1000) kj/m 2 Density and Specific Gravity (Relative Density) by Displacement (Method A) Indentation Hardness of Rigid Plastics by Means of Barcol Impressor Standard for Safety of Flammability of Plastic Materials for Parts in Devices and Appliances testing 1. Horizontal Burning 2. Vertical Burning angle Burning ASTM D792 : 13 ASTM D2583 : 13a UL 94 : 1998 (Class 7, Class 12) ASTM D635 : 10 ASTM D ISO 9772 : 2012 (3 rd Edition) IS 11731(Part 1) : 1986 (RA 2001) UL 94 (Class 8, Class 9, Class 11) IS (Part 2) : 1986 (RA 2001) IS 6746 : 1994 (0.8 to 2.5) g/cc (5 to 100) HBa (1 to 60) mm/min Heat Release Rate (Cone Calorimeter Method) ISO : 2002 MARHE: (1 to 500) kw/m 2 Reaction to fire tests - Ignitability of products subjected to direct impingement of flame - Part 2: Single-flame source test ISO : 2010 (3 to 60) s
13 Last Amended on - Page 13 of Polymer/plastics Vicat Softening Temperature of Plastics Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position ASTM D1525 : 09 ISO 306 : 2013 ISO 75-2 : 2013 ASTM D648 : 07, Method B 30 C to 275 C 30 C to 275 C Rockwell Hardness ISO : 1987 ASTM D785 : 08 (10 to 115) HRL 3. Polymer Matrix Composites Apparent interlaminar shear strength by short-beam method ASTM D2344 : 06 ISO : 1997 (5 to 500) MPa -X-X-X-X-X-X-X-X-X-X-X-X-X-X-
MIRTA-KONTROL d.o.o. LABORATORY DEPARTMENT
Textiles 1) Fibre composition - Qualitative analysis (Internal MK method) 2) Fibre composition - Binary fibre mixtures (EN ISO 1833-series) 3) Fibre composition - Ternary fibre mixtures (EN ISO 1833-2)
TESTING SERVICES OFFERED BY ATIRA TEXTILE & CHEMICAL TEXTILE TESTING LABORATORIES
TESTING SERVICES OFFERED BY ATIRA TEXTILE & CHEMICAL TEXTILE TESTING LABORATORIES Ahmedabad Textile Industry s Research Association P.O. Ambawadi Vistar, Ahmedabad- 380 015 Phones : 91-79-26307921-7922-7923,
Laboratory Reliable Analytical Laboratories Private Limited, Reliable House, 125 Indian Corpn Complex, Mankoli, Bhivandi, Thane, Maharashtra
Last Amended on - Page 1 of 7 I. PLASTICS, RUBBER AND LEATHER 1. Container for Packing of Natural Mineral Water and Packaged Drinking Water (Cups, glasses, bottles & Jars) Design, Shape and dimension IS
SGS India Private Limited, Consumer Testing Services-Laboratory, No. 134, 2 nd Floor, Sivashakthi Nagar, College Road, Tirupur, Tamil Nadu
Last Amended on 03.12.2015 Page 1 of 7 I. TEXTILE MATERIALS 1. Yarn) Linear Density SO-IN-CTS-C02-QU-001 (Version 3.2) ASTM D1907/D1907 M-12 ASTM D 1059: 2001 ISO 7211-5: 1984 BS ISO 7211-5: 1984 ISO 2060:
UL Quality Assurance Private Limited, A-12,Sector-34, Infocity Phase-1,Gurgaon; Haryana. Discipline Mechanical Testing Issue Date
Last Amended on - Page 1 of 22 I. TEXTILE MATERIALS 1. Textile- Fabric/Garment Tensile Strength Strip test BS EN ISO 13934-1: 2013 EN ISO 13934-1: 2013 ISO 13934-1: 2013 ASTM D5035 2011 AS 2001.2.3.1:
11 BS 4468 ; Withdrawn and replaced by BS En : 1994, ISO 1974 : 1990( 2012). Determination of tearing resistance ( Elmendorf method )
S No Standrads Name 1 ASTM SEC 7 - Textiles 2 ASTM SEC 8 - Plastics 3 ASTM SEC 9 - Rubber 4 ASTM SEC 10 - Electrical Insulation and Electronics 5 ASTM SEC 4 VOL 04.04:2013 (construction: volume 04.04:Roofing
Name of Laboratory : SGS CAMBODIA LABORATORY Accreditation Number : Testing : 1076 A-C, Street 371, Sangkat Stung Meanchey, Khan Meanchey,
Name of Laboratory Contact Person : Mr. Sopheak Chea Phone : + 855 23 967 888 Fax : - Email : Sopheak.Chea@sgs.com 1 Textiles - Colour fastness to light : ISO 105-B02 : 2014 Xenon-Arc BS EN ISO 105-B02
Services Directory updated: January 2016
Kulmbacher Straße 76 95213 Münchberg Tel. 09281/409-8720 Fax 09281/409-8799 E-mail: pruefamt@hof-university.de Director: Prof. Oliver Lottes Services Directory updated: January 2016 A) Mechanical and Technological
MITRAS MATERIALS GMBH
MITRAS MATERIALS GMBH Friedrich-Ochs-Str. 2 92637 Weiden/Opf. Tel.: 0961 / 89-810 / 89-812 Fax: 0961 / 89-672 Directory of services L a b o r a t o r y MITRAS MATERIALS GMBH Edition 02/18 Rev. 08 page
STS Directory Accreditation number: STS 0228
International standard: ISO/IEC 17025:2005 Swiss standard: SN EN ISO/IEC 17025:2005 TESTEX AG Schweizer Textilprüfinstitut Gotthardstrasse 61 CH-8027 Zürich Head: Responsible for MS: Dr. Jean-Pierre Haug
Crastin PBT Thermoplastic polyester resins
Crastin PBT Thermoplastic polyester resins Product guide and properties Start with DuPont Engineering Polymers DuPont s registered trademark Crastin PBT Thermoplastic polyester resins Introduction CRASTIN
NZWTA TEXTILE TESTING Price List Valid from 01 July 2017
NZWTA TEXTILE TESTING Price List Valid from 01 July 2017 Carpet Tests Test Method Minimum Sample Size ACCS Full Test Package (6 tests) 1 x 1.5 m, 6 tiles $734.00 Castor Chair Test ISO TR 4918, BS DIN EN
D-LAB Specifications. Your Partner for textile testing and quality assurance
D-LAB Specifications Your Partner for textile ing and quality assurance D-LAB is your neutral partner for reliable quality management and evaluation in all textile areas. Producers of home textiles, furnishing
Accreditation Scope of Consumer & Retail Services Laboratory, Karachi, Pakistan
All Textile MaterialsProduct F-0602 Issue : 100815 Testing Laboratory. Accreditation Scope of Consumer & Retail Services Laboratory, Karachi, Pakistan Permanent laboratory premises H- 33, Korangi Industrial
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CONSUMER TESTING LABORATORIES, INC. 2601 SE Otis Corley Drive Bentonville, AR 72712 Stephanie Anderson Phone: 479 286 2376 MECHANICAL Valid To: September 30,
Accreditation No: LAB 007. SGS Consumer & Retail Services - Laboratory H-3/3, Sector 5, Korangi Industrial Area, Karachi 74900, Pakistan.
F-0602 Issue : 100815 Accreditation No: Awarded to SGS Consumer & Retail Services - Laboratory H-33, Sector 5, Korangi Industrial Area, Karachi 74900, Pakistan. The scope of accreditation is in accordance
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CONSUMER TESTING LABORATORIES, INC. 2601 SE Otis Corley Drive Bentonville, AR 72712 Chessie Koko Phone: 479 286 2300 MECHANICAL Valid To: September 30, 2018
Geomembrane Test Methods
Appendix 2 Geomembrane Test Methods AMERICAN SOCIETY FOR TESTING AND MATERIALS (arranged by number) ASTM D-5 ASTM D-36 ASTM D-256 ASTM D-412 ASTM D-413 ASTM D-471 ASTM D-570 ASTM D-638 ASTM D-696 ASTM
Asian Test Equipment. Laboratory Solution by AN ISO 9001:2008 CERTIFIED COMPANY. Tensile Strength Tester. Indentation Hardness Tester
AN ISO 9001:2008 CERTIFIED COMPANY Tensile Strength Tester Indentation Hardness Tester Box Compression Tester Bursting Strength Tester Specific Gravity Balance Hot Air Oven Toxicity Tester Flexometer Melt
TECHNYL A 218 BLACK 21N
TECHNYL A 218 BLACK 21N Description TECHNYL A 218 Black 21 N is an unreinforced polyamide 66, standard viscosity, heat stabilized for injection moulding.it is available in black color. Key Properties Chemical
UL S EXPEDITED COMPLIANCE SERVICES APPAREL
APPAREL APPAREL (1 COLOR / 1SIZE) Tier 1 - Regulatory - All $150 $90 Flammability General Wearing Apparel 16 CFR 1610 Flammability - Vinyl 16 CFR 1611 Care Labeling 16 CFR 423, ASTM D 3136, ASTM D 5489
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 GHESQUIERE PLASTIC TESTING, INC. 20450 Harper Avenue Harper Woods, MI 48225 Douglas Leggat Phone: 313 885 3535 Fax: 313 885 1771 E-mail: doug@gptesting.com
COMMERCIAL ITEM DESCRIPTION SEAT COVER CLOTH, POLYESTER OR NYLON, WATER-RESISTANT
[INCH-POUND] May 14, 1999 COMMERCIAL ITEM DESCRIPTION SEAT COVER CLOTH, POLYESTER OR NYLON, WATER-RESISTANT The General Services Administration has authorized the use of this commercial item description
The above data are preliminary and are subject to change as additional data are developed on subsequent lots.
Zenite LCP Product Information liquid crystal polymer resin 30% Glass Reinforced Liquid Crystal Polymer Resin PRELIMINARY DATA Zenite 7130 is a 30% glass reinforced LCP resin having excellent toughness
AUTOMOTIVE TESTS. BMW AUTOMOTIVE Pile Yarn Thickness $ 25.00
AUTOMOTIVE TESTS BMW AUTOMOTIVE3.2.4.2 Pile Yarn Thickness $ 25.00 BMW 3.2.10 Imprint Behavior Without Foam Impression Depth @ 60 Minutes and 24 hours (DIN 54316/EN20 105 A02) $ 75.00 BMW 3.2.10.2 Tested
The Groz-Beckert central laboratory. Overview and service specifications
The Groz-Beckert central laboratory Overview and service specifications Material testing Determination of the chemical composition of inorganic materials Emission spectroscopy (Fe, Ni, Al, Cu basis) C,
President For the Accreditation Council Certificate Number Valid to August 31, 2008
A2LA has accredited THE AMERICAN ASSOCIATION FOR LABORATORY ACCREDITATION ACCREDITED LABORATORY PEARL LEATHER FINISHERS, INC. TESTING LABORATORY Johnstown, NY for technical competence in the field of Mechanical
Polyamide 6 for Injection Moulding
Polyamide 6 for Injection Moulding Promyde is a trademark of NUREL 1 NUREL Engineering Polymers Excellence in Polymerization Recent technical advancements in NUREL polymerization processes have enabled
Tensile (Reinf. Geomembranes)
POLYMERIC GEOMEMBRANES Asperity Height ASTM D7466, GRI GM12 Thickness (PVC) ASTM D1593 Thickness (Smooth PE) ASTM D751, D5199, ISO9863-1 Thickness (Textured PE) ASTM D5994 Weight ASTM D751, ISO 9864 Composition
Geoscience Testing laboratory (Al Ain)
Soil 1 In-situ Density by Sand Replacement Method Using Large Pouring Cylinder & Small Pouring Cylinder In-place Density Test by Sand Cone Method BS 1 Part ASTM D 1556 Dry Density Moisture Content Relationship
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. ACCULAB INC Railroad Drive El Paso, TX Vladimir Juarez Phone: MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ACCULAB INC. 9900 Railroad Drive El Paso, TX 79924 Vladimir Juarez Phone: 915 751 1000 MECHANICAL Valid To: June 30, 2016 Certificate Number: 2692.01 In recognition
BS EN 14465:2003 Test Report
Report Ref: LEHTX00601372 Date Received: BS EN 14465:2003 Test Report Buying Division: 20/10/2011 Date Issued: 24/10/2011 Company Name & ddress Contact Name FLMEPROOFING LIMITED UNITS 1 & 2 LYON INDUSTRIL
Second Correlating Revision No. 3 NFPA [ Section No ]
![Second Correlating Revision No. 3 NFPA [ Section No ]](/thumbs/76/73230477.jpg "Second Correlating Revision No. 3 NFPA [ Section No ]")
Second Correlating Revision No. 3 NFPA 1991 2015 [ Section No. 2.3.2 ] 2.3.2 ASTM Publications. American Society for Testing and Materials, 100 Barr Harbor Drive, West Conshohocken, PA 19428 2959. ASTM
QUALITY FITS. Product range injection molding grades with reference data
QUALITY FITS. Product range injection molding grades with reference data POCAN COLOR NOMENCLATURE Pocan is available in a large number of colors. We use a six-digit number to precisely characterize the
Wolf Kunststoff ZEDEX ZX-530 A5D Polymer Alloy
Wolf Kunststoff ZEDEX ZX-530 A5D Polymer Alloy Category : Polymer, Thermoplastic Material Notes: Main Characteristics: Low Creep; Low moisture absorption; Flame retardant; Low impurity ions; Good machinability;
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. AUTONEUM NORTH AMERICA, INC Haggerty Rd. Novi, MI Jian Pan Phone: MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 AUTONEUM NORTH AMERICA, INC. 29293 Haggerty Rd. Novi, MI 48331 Jian Pan Phone: 248 324 2264 MECHANICAL Valid To: October 31, 2017 Certificate Number: 1745.02
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 RELIABLE ANALYSIS SHANGHAI, INC. No. 10, 12A, 24 Lane 1365 Kang Qiao Road East Shanghai, People s Republic of China, 201319 Mr. Victor Wen Phone: 86 21 6818
F 427/3 Strength Tester for Yarns, Hanks and Fabrics
F 427/3 Strength Tester for Yarns, Hanks and Fabrics In its basic form the F 427/3 Strength Tester has since its introduction proved its worth with clients throughout the world. Its various testing programmes
Polyamide 6 & 66 for Injection Moulding
Polyamide 6 & 66 for Injection Moulding Promyde is a trademark of NUREL 1 NUREL Engineering Polymers Polymerization Integrated into In-House Compounding 50 years experience in polymerization processes
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. ACCULAB INC Railroad Drive El Paso, TX Jose Gonzalez Phone: MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ACCULAB INC. 9900 Railroad Drive El Paso, TX 79924 Jose Gonzalez Phone: 915 751 1000 MECHANICAL Valid To: June 30, 2020 Certificate Number: 2692.01 In recognition
Certificate of Accreditation
ISO/IEC 17025:2005 Certificate of Accreditation Certificate Number L2195 Exova, Inc. Anaheim 3883 East Eagle Drive Anaheim CA 92807 has met the requirements set forth in L-A-B s policies and procedures,
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 GUILFORD PERFORMANCE TEXTILES KENANSVILLE 1754 NC 903 / Highway 11 North Kenansville, NC 28349 Teresa Carter Phone: 910 296 5314 MECHANICAL Valid To: May 31,
Grade A. Evo EV-19 EV-5 EV-4 EV-2 EV-18 EV-14 EV-10 EV-22 EV-20 EV-21 EV-1 EV-23 EV-24 EV-25. Discover more at inscapesolutions.
Grade A Evo EV-2 EV-4 EV-5 EV-9 EV-10 EV-11 EV-14 EV-18 EV-1 EV-19 EV-20 EV-21 EV-22 EV-23 EV-24 EV-25 Evo Application Fan Specifications Contents Weight Per Unit 100% polyester 300 g/m² Performance Colorfastness
Laboratory SGS Bangladesh Limited, Laboratory Services, IIUC Tower, Plot No. 9, Agrabad Commercial Area, SK Mujib Road, Chittagong, Bangladesh
Last Amended on 22.04.2015 Page 1 of 5 I. TEXTILE & TEXTILE AUXILIARIES 1. Dimensional stability to washing Dimensional stability to Dry cleaning Appearance of fabric after repeated home laundering Smoothness
Texin 245 Covestro PUR Thermoplastic Polyurethane Elastomer (Polyester) Action Saturday, October 22, 2016 Units English Legend (Open) General Information Product Description Texin 245 resin is an aromatic
MAIN LAB CONDITIONED ROOM FLAMMABLES FTT SNAPRITE MMT SWEATING GUARDED HOT PLATE ROTAWASH AIRPERM ROTAPILL PILLING AND SNAGGING TESTER
1 -HEAD MARTINDALE UNIVERSAL TENSILE TESTER, K ST 1 1 1 1 1 1 0 M 1 -HEAD MARTINDALE UNIVERSAL TENSILE TESTER, K ST The innovative measures skin touch properties of textiles objectively and quantitatively.
Thrace-LINQ, Inc. GTF GTF GTF GTF GTF GTF GTF GTF 170SF 180SF/190SF S AASHTO AASHTO AASHTO AASHTO AASHTO AASHTO
Woven Polypropylene GTF GTF GTF GTF GTF GTF GTF GTF 170SF 180SF/190SF 200S 200 250 270 300 AASHTO AASHTO AASHTO AASHTO AASHTO AASHTO 90 125 / 101 150 / 180 200 250 270 315 (400) (556 / 449) (667 / 445)
MATERIAL DATA SHEET* ALPANA d.o.o.
MATERIAL DATA SHEET* ALPANA d.o.o. Contents H-Pur Material Data Sheet... 2 LT-Pur Material Data Sheet... 3 S-Pur Material Data Sheet... 4 XH-Pur Material Data Sheet... 5 XSH-Pur Material Data Sheet...
Hari Shankar Singhania Elastomer & Tyre Research Institute, HASETRI, Plot No. 437, R&D Center, Hebbal Industrial Area, Mysuru, Karnataka
Page 1 of 11 CHEMICAL TESTING I. RUBBER AND RUBBER PRODUCTS 1. Polymer/ Elastomeric materials 2. Fillers Heat Loss of carbon black Ash content ASTM D5667 0.1-45 % ISO 247 Dirt Content ASTM D1278 0.1-10
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
(part of Smithers Rapra and Ltd) Packaging Technical Services Cleeve Road Leatherhead Surrey KT22 7RU Contact: Mr G Collis Tel: +44 (0)1372 802000 Fax: +44 (0)1372 802245 E-Mail: gcollis@smithers.com Website:
Labthink Instruments Co. Limited http://www.labthinktestinstruments.com/ We are engaged in manufacturing, supplying, and exporting a comprehensive gamut of Testing Equipment like Permeability Test, Tensile
Material Testing TEXTILE/LEATHER TESTER. Digital Bursting and Strength Tester Strength Tester. Manual Wrap Reel Motor Wrap Reel Spray Tester
TEXTILE/LEATHER TESTER Bursting and Strength Tester Digital Bursting and Strength Tester Accesories Bursting and Strength Tester Manual Wrap Reel Motor Wrap Reel Spray Tester Motor Twist Tester Yarn Inspector
Specification Cloth, Fire Resistant, Softshell
Royal Canadian Mounted Police Gendarmerie royale du Canada Doc. no: G.S. 1045-373 Date: 2017-05-20 Specification Cloth, Fire Resistant, Softshell This document has 12 pages. This document was created in
Data sheet InnoSolTEX (ORMTEX )
Test results: High Visibility Fabrics - Technical Textiles (protective clothing) LUMINEX, Klopman GmbH, Ratingen, Germany - 60 % cotton - 40 % polyester Antimicrobial activity: DIN EN ISO 20645:2004-100
PROVIDING ACCURATE DATA IN A TIMELY MANNER
PROVIDING ACCURATE DATA IN A TIMELY MANNER 248 Hughes Lane St. Charles MO 63301 Ph. (636) 949-5835 Fax (636) 723-5835 www.elteklabs.com MATERIAL PROPERTIES LAB TRACKING TESTS TEST METHOD UL 746-A Section
ULTEM* 1010 Resin. SABIC Innovative Plastics - Polyether Imide. Actions. General Information. Product Description
ULTEM* 1010 Resin SABIC Innovative Plastics - Polyether Imide Actions General Information Product Description Transparent, enhanced flow Polyetherimide (Tg 217C). ECO Conforming, UL94 V0 and 5VA listing.
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 HP PELZER MATERIALS TESTING LABORATORY 1175 Crooks Road Troy, MI 48084 Renata Machnik Phone: 248 280 2500 x176 MECHANICAL Valid To: November 30, 2018 Certificate
ACCREDITED LABORATORY
A2LA has accredited THE AMERICAN ASSOCIATION FOR LABORATORY ACCREDITATION ACCREDITED LABORATORY AKRON RUBBER DEVELOPMENT LABORATORY, INC. Akron, OH for technical competence in the field of Mechanical Testing
Accessories Performance Standards Manual. Version 1 24/12/
Accessories Performance Standards Manual Version 1 24/12/2010-1 - CONTENTS Page/s Introduction 3 QVC Preferred Laboratories 4-7 Restricted Substances 8 List of Restricted Substances 9 Azo Dye Self Certification
RELIABLE ANALYSIS INC. Troy, MI for technical competence in the field of
A2LA has accredited RELIABLE ANALYSIS INC. Troy, MI for technical competence in the field of Mechanical Testing This laboratory is accredited in accordance with the recognized International ISO/IEC 17025:2005
Antifreeze Resistant Fatigue Resistant Gasoline Resistance Automotive Under the Hood ASTM D 4066 PA012G30 ASTM D 6779 PA012G30
Vydyne R530H Nylon resins are general purpose polyamide, heat stabilized, hydrolysis resistant, 30% glass fiber reinforced resins. Available in natural and black. It is specifically designed to maximize
Laboratory Bureau Veritas Consumer Products Services Lanka (Pvt.) Ltd., No. 570, Galle Road, Katubedda, Moratuwa, Sri Lanka
Last Amended on - Page 1 of 14 I. TEXTILE & TEXTILE AUXILIARIES 1. Textiles- Fabric/Garment Colorfastness to Crocking AATCC 8: 2013 BS EN ISO 105-X12: 2002 AATCC 116: 2013 Colorfastness to Perspiration
CIMEC Technologies Pvt. Ltd., 23/H, Meldi Estate, Gota, Ahmedabad, Gujarat. Discipline Mechanical Testing Issue Date
Last Amended on - Page 1 of 9 I. BUILDINGS MATERIALS 1. Cement & Pozzolanic Material Fineness (Dry Sieving) IS 4031(Part 1): 1996 (RA 2011) 10 % to 100 % Fineness (Blain Air Permeability) IS 4031(Part
Components: Dimensions / Order Codes Clamp Body. * 1st part of STAUFF Group 4. * Exact outside diameters Ø D1 / Ø D2 (mm) Clamp Body.
Components: Dimensions / Order Codes Clamp Body Clamp Body Colour: Green Material code: PP 4 PP One clamp body is consisting of two clamp halves. 1st part of STAUFF 4 Exact outside diameters Ø D1 / Ø D2
About Our Fire Safety Curtains
About Our Fire Safety Curtains J.R.Clancy fire safety curtains provide a barrier between the stage and auditorium in the event of a fire. The barrier prevents the heat, smoke, and flame from a fire on
Product Description PLEXIGLAS GS PLEXIGLAS XT
Product Description PLEXIGLAS GS PLEXIGLAS XT PLEXIGLAS trademark for the world s first acrylic was invented by us and first produced by the casting process in 1933. Today we manufacture PLEXIGLAS GS (=
GB/T Translated English of Chinese Standard: GB/T NATIONAL STANDARD OF
Translated English of Chinese Standard: GB/T3917.3-2009 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 59.080.30 W 04 GB/T 3917.3-2009 Replacing
AKROMID FR (PA 6.6, PA 6, PA 6.6/PA 6, PPA) AKROLOY FR (PA Blend)
FLAME-RETARDANT COMPOUNDS AKROMID FR (PA 6.6, PA 6, PA 6.6/PA 6, PPA) AKROLOY FR (PA Blend) AKRO-PLASTIC GmbH Member of the Feddersen Group Flame-retardant Products Increasingly Important for Extended
Composition Fibreglass 34% - PVC 48% - PVC laminate 18% By heat, high frequency or ultrasonic welding
Serge 600 Blockout Solar - charcoal charcoal Technical info FRONT BACK Widths 300 cm Composition Fibreglass 34% - PVC 48% - PVC laminate 18% Openness factor NBN EN 410 3.00% Weight NF EN 12127 650.00 g/m²
Spaceloft Insulation TECHNICAL GUIDE
(Click below to jump to sections.) Contents Introduction 3 Non-Combustibility and Fire Performance 4 EN 13501-1 Reaction to Fire Classification (Bodycote, Warrington Fire) ASTM E 84 Surface Burning Characteristics
Automotive Testing and Engineering Services
UL PERFORMANCE MATERIALS Automotive Testing and Engineering Services OEM Testing according to OEM Delivery Specifications performance materials for automotive applications Automotive Supplier Raw Materials
--> Buy True-PDF --> Auto-delivered in 0~10 minutes. GB/T Translated English of Chinese Standard: GB/T3923.
Translated English of Chinese Standard: GB/T3923.2-2013 www.chinesestandard.net Sales@ChineseStandard.net NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA GB ICS 59.080.30 W 04 Replacing GB/T 3923.2-1998
A Case Study: Review of Flammability Product Testing, the Similarities and Differences Ellen Roaldi Bureau Veritas Consumer Products Services
A Case Study: Review of Flammability Product Testing, the Similarities and Differences Ellen Roaldi Bureau Veritas Consumer Products Services September 22, 2016 Agenda Methods Analysis Applicability Requirements
Dimensions / Order Codes
U-Bolt Clamps Dimensions / Flat Steel U-Bolt with Plastic Pipe Saddle (Short) and U-Profile Type FB+RUK (To be used as Fixed Point Clamps only) B1 ø D1 H4 H2 H3 H1 L2 L1 B2 Flat Steel U-Bolt (type FB)
DILLARD S TEST PROTOCOL FOR DILR US LUGGAGE (V26)
Test Date: Reviewed By/Date: SUPPLEMENTAL PROTOCOLS DILLARD S TEST PROTOCOL FOR 1 The sample shall be reviewed against the requirements of California Proposition 65 to determine if additional testing or
POLYCAST CELL CAST ACRYLIC Solutions for Aerospace
POLYCAST CELL CAST ACRYLIC Solutions for Aerospace Delivering aircraft transparencies for the demanding aerospace industry. cast cell cast acrylic has been manufactured and trusted by the aerospace industry
AutomAtic Strength tester AUTODYN
Automatic Strength TESTER AUTODYN AUTODYN Automatic Strength Tester Description Automatic Strength Tester, up to 24 positions, for testing the tensile strength of yarns. It can also test yarns, hanks and
Geosynthetics Laboratory
Geosynthetics Laboratory n One of the most advanced testing facilities in the industry n World-class geosynthetics R & D Cutting edge STATE OF THE ART GEOSYNTHETICS LABORATORY The Geosynthetics industry
Elastollan Product Range
Thermoplastic Polyurethane Elastomers (TPU) Elastollan Product Range Elastogran is Polyurethanes Contents Quality management to DIN EN ISO 9001 Page 2 Nomenclature for Elastollan Page 3 Packaging, Storage
CiMEC Technologies Pvt. Ltd., 23/H, Meldi Estate, Gota, Ahmedabad, Gujarat. Discipline Electrical Testing Issue Date
Last Amended on - Page 1 of 6 I. CABLES AND ACCESSORIES 1. PVC Insulated Cables Tests on Conductor: Annealing Test (copper) IS 10810 (Part 1):1984 (RA 2011) 0 to 50 % Tensile Test (Aluminium) IS 10810
Epoxy Resin L Unit Value
Technical data Epoxy Resin L + Hardener S, L, CL, EPH 500, W 300, GL 1, GL 2, EPH 573 and EPH 161 Low viscosity, free of solvents and fillers Fast impregnation of glass, aramid, and carbon fibres High
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 APPLIED TECHNICAL SERVICES, INC. 1049 Triad Court Marietta, GA 30062 Cathy Mansfield Phone 770 423 1400 cmansfield@atslab.com MECHANICAL Valid To: June 30,
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 AUTONEUM NORTH AMERICA, INC. 480 West 5 th Street Bloomsburg, PA 17815 Justine Danilowicz Phone: 570 316 6078 MECHANICAL Valid To: April 30, 2019 Certificate
Halogen Free, Flame-retardant Polyether based TPU
STANDARD COLORS CMX Cable Markers Halogen Free, Flame-retardant Polyether based TPU TECHNICAL DATA SHEET Revision Number. 1 Last Edited 11. marts 2019 OTHER COLORS MATERIAL halogen free, flame retarded
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 LABORATORIO CENTRAL DE BADER DE MEXICO 1 Bader de Mexico Sigma 601, Parque Industrial Delta Leon, Guanajuato C.P. 37179 MEXICO Juanita Landin Phone: 52 477
COMPFIRE. Reaction Frame. Camera 3. Macalloy Bars. Camera 2. Link Bar. Support Beam. Oven Bar. Camera 1. Jack Bar.
Reaction Frame Macalloy Bars Camera 3 Support Beam α Oven Bar Camera 2 Link Bar Camera 1 Tested Connection Jack Bar Electrical Furnace Reaction Frame Load Jack 22 September 2010 1 Oven Bar Link Bar View
Faurecia Interior Systems India Pvt. Ltd., Test Laboratory, Plot No. T-187, Pimpri Industrial Area (B. G. Block), Bhosari, Pune, Maharashtra
Last Amended on - Page 1 of 5 I. AUTOMOTIVE COMPONENTS 1. Component Testing (Rubber & Plastic Products) a. (Plastics/Fabric/ Soiling & Cleanability Ford FLTM BN 112-08: 2010 Daimler DBL 5399: 2007 General
MARV
Nonwoven Geotextile Property Table English Values PROPERTY TEST METHOD UNIT VALUE 311 351 401 451 501 601 701 801 1001 1201 1601 Grab Tensile Strength ASTM D-4632 lb MARV 80 95 115 120 150 160 180 205
POlyNIl Product Brochure
POLYNIL Product Brochure APPLICATION PA6.6 Unreinforced for PRODUCT P50 FI P50 FIHS P50 FIBK P50 N P50 FL P50 FLBK P50 L Polynil P50 LBK PROPERTIES Internally Internally heat stabilized, Internally Nucleated,
EFFECT OF TYRE OVERLOAD AND INFLATION PRESSURE ON ROLLING LOSS & FUEL CONSUMPTION OF AUTOMOBILES CARS
EFFECT OF TYRE OVERLOAD AND INFLATION PRESSURE ON ROLLING LOSS & FUEL CONSUMPTION OF AUTOMOBILES CARS D.MADHUSUDHANA 1 C. NAGARAJA 2 PG Student Assistant Professor Dept. of Mechanical Engineering Dept.
Tel +44 (0) Fax +44 (0)
Tel +44 (0)1235 815816 Fax +44 (0)1235 811234 E-mail oilite@bowman.co.uk Contents Page Company Profile 1-2 ISO Certificate 2 Product Pictures 3 Wrapped Bearings Technical Information 4 Wrapped Bearings
PLEXIGLAS Sheet Products for Aircraft Transparencies PLEXIGLAS GS 245 PLEXIGLAS GS 249. Aviation
PLEXIGLAS Sheet Products for Aircraft Transparencies PLEXIGLAS GS 245 PLEXIGLAS GS 249 Aviation Business Unit Röhm Plexiglas is the world leader in polymethyl methacrylate sheet products. Our PLEXIGLAS
TRACKSAFE INFLATABLE BARRIER SYSTEM T.I.B.S. Champion Products Limited 95d Attleborough Road Nuneaton Warwickshire CV11 4JQ United Kingdom
TRACKSAFE INFLATABLE BARRIER SYSTEM T.I.B.S. Champion Products Limited 95d Attleborough Road Nuneaton Warwickshire CV11 4JQ United Kingdom 1 I N D E X 1 Introduction 3 2 Dimensions 3 3 Design and Construction
TMS CABLE MARKERS CM-SCE & CM-SCE-TP. Tie on Identification Product
Page 1 of 12 October 2015 Specification RW-2513 Document Number: 108-121016 TMS CABLE MARKERS CM-SCE & CM-SCE-TP Including HL cable marker range Tie on Identification Product SCOPE This quality assurance
Discipline Chemical Testing Issue Date Certificate Number T-2217 Valid Until Last Amended on
Last Amended on 19.05.2014 Page 1 of 10 I. TEXTILES & RELATED PRODUCTS 1. Garment / Fabric C/F To Laundering Home & Commercial : Accelerated, Modified 2A Cold (27 0 C), 2A Warm (49 0 C) AATCC 61: 2013
Labthink Instruments Co. Limited www.labthinktestinstruments.com We are engaged in manufacturing, supplying, and exporting a comprehensive gamut of Testing Equipment like Permeability Test, Tensile Test,
DILLARD'S INC TEST PROTOCOL FOR DILL USA- (V22) HANDBAG (CHILDREN)
By/Date: Page 1 of 6 SCOPE: This protocol is applicable for testing of handbag for children. SUPPLEENTAY POTOCOL Note: Additional cost, sample size and TAT may be required if testing to 1 or more supplemental
Sealon Adhesive PTFE Gasket Tape. Technical Data Sheet
Page 1 of 6 is a versatile, easy to use sealing tape that lets you make your own gaskets in an instant. It s made from expanded PTFE which makes it very easy to shape and allows it to compress with only
Sergé 3% WS03A OF 3% FABRIC CODE. Ultra wide range of proprietary woven screen fabrics. Unsurpassed flexibility, applicable in any kind of situation.
Sergé 3% WS03A OF 3% FABRIC CODE Ultra wide range of proprietary woven screen fabrics. Unsurpassed flexibility, applicable in any kind of situation. Can be used both exterior and interior. 28 Guide me
REMA TECHNICAL INFORMATION DIN 80, 160, 320. Page 1 of 13
DIN 80, 160, 320 C O N N E C T O R D A T A S H E E T Page 1 of 13 DIN 80, 160 and 320 Connector datasheet REMA is the leading supplier of DIN-style (DIN standard 43589) quick-disconnect power connectors.