SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. ACCULAB INC Railroad Drive El Paso, TX Vladimir Juarez Phone: MECHANICAL
|
|
|
- Emma Flowers
- 5 years ago
- Views:
Transcription
1 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ACCULAB INC Railroad Drive El Paso, TX Vladimir Juarez Phone: MECHANICAL Valid To: June 30, 2016 Certificate Number: In recognition of the successful completion of the A2LA evaluation process, accreditation is granted to this laboratory to perform the following tests on polyurethane foam (flexible and semi-rigid), foam / fiberglass laminated boards and foam / fabric laminated rolls: Test Description Adhesion Air Permeability Ball Rebound Bow and Skew ASTM D413 (B), D751 (50-53), D903 Chrysler LP-463LB Fiat 50441/05 FLTM BN GMW 3220 HES D (5.24) MS (4.10), (4.23.1) NES NDS00 TSL 2100G (4.39), 2105G (4.11), 5100G (4.5) ASTM D737, D3574 (G) HES D (5.17) TSL 2100G (4.6), 2107G (4.1) ASTM D3574 (H) ESX (4.15) JIS K6400 (Section 9) TSM 7100G (4.7) ASTM D3882 Chrysler LP-463KB GMW (Inactive) Breaking Strength ASTM D751 (11) Cleaner Resistance GMW 3402 Circular Modulus TSL 2100G (4.11), 2104G (4.8) Cold Resistance MS-AY 310 (3.3) Color Fastness to Elevated Temperatures GM 2737M 1,2 (6.2) (Inactive), 9131P (A2LA Cert. No ) 08/22/2014 Page 1 of 5
2 Color Fastness to Light (Xenon) GMW 3414 SAE J1545, J1767, J2412 TSL 2100G (4.28) Method B, 2106G (4.8) Method B Color Fastness to Rubbing (Crocking) AATCC 8 FLTM BN (Procedure A) SAE J861 Compression Force Deflection Compression Set (Normal) ASTM D1621, D3574 (C) ESX (4.4/4.7) Renault D ISO ASTM D3574 (D) ESB-M17H C2, C3, C4 (3.3.4, 3.4.9) (Inactive) ESX (4.9) FLTM BN FNMN-LOS-ST E (4.7.6) ISO 1856 (A) JIS K6400 (7) NES M0086 (8) Renault D TSM 7100G (4.8) Conditioning ASTM D3574 (6) GMW 3221 Crease Curling Density Dimensional Stability GM 9201P 2 (Inactive) WSS M8P3 (3.28.1), M8P18 (3.13.2) GM 2737M 1, 2 (5.9) (Inactive), 9330P GMW 4089, 4217 (5.3.7) WSS M8P3 (3.27), M8P18 (3.19) ASTM D3574 (A) ESX (4.3), (4.1) HES D (5.1) ISO 845 JIS K6400 (5) NES M0086 (4) TSM 7100G (4.1) ASTM D2126 GMW 4217 SAE J315 (15), J883 TSL 2100G (4.5), 2104G (4.5) Environmental Aging ASTM D3574 (J, K, L) Chrysler LP 463KC-15-01, 463LB (Except Method B), 463LB FLTM BO GM 9131P, 9200P GMW (Cycles M, Q, R, S, T) ISO 2440 SAE J323 (Method A) (A2LA Cert. No ) 08/22/2014 Page 2 of 5
3 Fatigue (Static Force Loss) ASTM D3574 (I1) Fiber Degradation GMW 3387 Flammability Flammability, Horizontal Burn Flexibility Fogging CAL 117, Section A, Part I, (Vertical Burn) CAL 117, Section D, Part II, (Smoldering) ASTM D5132 DIN ESX FLTM BN FNMN-LOS-ST E (4.7.7) FMVSS 302 GM 9070P 2 (Inactive) GMW 3232 HES D ISO 3795 MES CF 050E MS NES M0094 SAE J369 TSM 0500G TS Chrysler LP-463LB ESB M4D113-C (3.4.2) FLTM BN (Procedure A) WSB M17H93-C8 (3.6.6) Chrysler LP-463DB GM 9305P 2 (Inactive) GMW 3235 (Photometric) FNMN-LOS-ST E (4.7.9) SAE J1756 (Photometric) TSM 0503G Heat Discoloration Resistance NES 8700 NDS00 (13-10) Hydrolytic Stability Indentation Force Deflection GM 9231P ASTM D3574 (B) ESX (4.8) JIS K6400 (6) NES M0086 (5) SAE J815 TSM 7100G (4.2) Inverted Bending Test TSL 2100G (4.44), 2104G (4.14) TS (6.25) Lint Retention GMW 3347 Load Height Change ESB M4D113-C (3.4.1) (A2LA Cert. No ) 08/22/2014 Page 3 of 5
4 Mass Per Area ASTM D3776 (Except A) FLTM BN GM 2726M 1, 2 (3.3) (Inactive), 2737M 1, 2 (5.1) (Inactive) GMW 3182 MS (4.1), (4.2.1) SAE J860 TSL 2100G (4.1), 2104G (4.1) Mildew Resistance GM 9128P (Inactive) GMW 3259 Moisture Uptake MS (4.3) WSS M2D491-A1 (3.5.14) Odor ESX (4.9) FLTM BO GMW 3205 SAE J1351 Pile Distortion GMW 4141 Ravel Resistance GMW 3217 Resistance to Blocking GM 2737M 1, 2 (5.14) (Inactive) Seam Fatigue GMW 3405 TSL 2100G (4.17), 2105G (4.5) Seam Strength Chrysler LP-463KB (Methods A & B) FLTM BN MS (4.27), (4.9.1) TSL 2100G (4.16), 2105G (4.4), 2106G (4.4) Shrinkage FLTM BN Solvent Resistance (Cleanability) ESB M4D113-C (3.10) Chrysler LP-463KC MS-AY 310 (Table 2) Staining FLTM BN GM 9141P Stiffness / Softness TSL 2100G (4.45), 2104G (4.15) TS (6.26) Stress Relaxation TSM 7100G (4.4) Stretch and Set GMW 3211 HES D (5.5) SAE J855 TSL 2100G (4.9), 2104G (4.6), 2105G (4.2) Taber Abrasion GMW 3208 MS (4.19), (4.11) SAE J948 (3) TSL 2100G (4.18), 5100G (4.12) (A2LA Cert. No ) 08/22/2014 Page 4 of 5
5 Tear Resistance ASTM D624 (Die C), D2261, D3574 (F), D5587, D751 (28-35) GMW 3326 ISO 8067, JIS K6400 (11) MS (4.9), (4.7.1, 4.7.2) NES M0086 (12) TSL 2100G (4.12), 2105G (4.3), 2106G (4.2, 4.3) TSM 7100G (4.6) Tensile Strength / Elongation ASTM D3574 (E), D5034, D751 (11-17) ESX (4.4) GMW 3010 ISO 1798 JIS K6400 (10) MS (4.6, 4.7), (4.4.1, 4.5) NES M0086 (6) TSL 2100G (4.7), 2105G (4.1), 2106G (4.1) TSM 7100G (4.5) Thickness ASTM D1777, D3574 (8) ESX (4.3), (4.2.2) ISO 5084 TSL 2100G (4.47), 2104G (4.16), 5702G (6.4) Water Absorption SAE J315 (12) Water Spotting GM 9133P GMW The laboratory is accredited for the test methods listed above. The accredited test methods are used in determining compliance with any material specifications included on this Scope; however, the inclusion of these material specifications on this Scope does not confer laboratory accreditation to the material specifications. Inclusion of these material specifications on this Scope also does not confer accreditation for every method embedded within the specification. Only the methods listed above on this Scope are accredited. 2 This laboratory s scope contains withdrawn, inactive or superseded methods. As a clarifier, this indicates that the applicable method itself has been withdrawn or is now considered historical and not that the laboratory s accreditation for the method has been withdrawn. (A2LA Cert. No ) 08/22/2014 Page 5 of 5
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. ACCULAB INC Railroad Drive El Paso, TX Jose Gonzalez Phone: MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ACCULAB INC. 9900 Railroad Drive El Paso, TX 79924 Jose Gonzalez Phone: 915 751 1000 MECHANICAL Valid To: June 30, 2020 Certificate Number: 2692.01 In recognition
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. AUTONEUM NORTH AMERICA, INC Haggerty Rd. Novi, MI Jian Pan Phone: MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 AUTONEUM NORTH AMERICA, INC. 29293 Haggerty Rd. Novi, MI 48331 Jian Pan Phone: 248 324 2264 MECHANICAL Valid To: October 31, 2017 Certificate Number: 1745.02
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 GUILFORD PERFORMANCE TEXTILES KENANSVILLE 1754 NC 903 / Highway 11 North Kenansville, NC 28349 Teresa Carter Phone: 910 296 5314 MECHANICAL Valid To: May 31,
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 HP PELZER MATERIALS TESTING LABORATORY 1175 Crooks Road Troy, MI 48084 Renata Machnik Phone: 248 280 2500 x176 MECHANICAL Valid To: November 30, 2018 Certificate
President For the Accreditation Council Certificate Number Valid to August 31, 2008
A2LA has accredited THE AMERICAN ASSOCIATION FOR LABORATORY ACCREDITATION ACCREDITED LABORATORY PEARL LEATHER FINISHERS, INC. TESTING LABORATORY Johnstown, NY for technical competence in the field of Mechanical
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 AUTONEUM NORTH AMERICA, INC. 480 West 5 th Street Bloomsburg, PA 17815 Justine Danilowicz Phone: 570 316 6078 MECHANICAL Valid To: April 30, 2019 Certificate
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 GHESQUIERE PLASTIC TESTING, INC. 20450 Harper Avenue Harper Woods, MI 48225 Douglas Leggat Phone: 313 885 3535 Fax: 313 885 1771 E-mail: doug@gptesting.com
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. SCHAP LABORATORY SERVICES, LLC Taft Road, Unit 5 Spring Lake, MI Erik Johnson Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCHAP LABORATORY SERVICES, LLC 17309 Taft Road, Unit 5 Spring Lake, MI Erik Johnson Phone: 616 846 6530 MECHANICAL Valid To: June 30, 2020 Certificate Number:
AUTOMOTIVE TESTS. BMW AUTOMOTIVE Pile Yarn Thickness $ 25.00
AUTOMOTIVE TESTS BMW AUTOMOTIVE3.2.4.2 Pile Yarn Thickness $ 25.00 BMW 3.2.10 Imprint Behavior Without Foam Impression Depth @ 60 Minutes and 24 hours (DIN 54316/EN20 105 A02) $ 75.00 BMW 3.2.10.2 Tested
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 RELIABLE ANALYSIS SHANGHAI, INC. No. 10, 12A, 24 Lane 1365 Kang Qiao Road East Shanghai, People s Republic of China, 201319 Mr. Victor Wen Phone: 86 21 6818
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 NATIONAL EXPOSURE TESTING, INC. 3211 Centennial Road Sylvania, OH 43560 Christa Lammers Phone: 419 841 1065 MECHANICAL Valid To: October 31, 2016 Certificate
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 NATIONAL EXPOSURE TESTING, INC. 3211 Centennial Road Sylvania, OH 43560 Christa Lammers Phone: 419 841 1065 MECHANICAL Valid To: October 31, 2018 Certificate
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. AUTO TECHNOLOGY COMPANY Progress Drive Strongsville, OH Kevin Smith MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 AUTO TECHNOLOGY COMPANY 20026 Progress Drive Strongsville, OH 44149 Kevin Smith 440 572 7800 MECHANICAL Valid To: December 31, 2019 Certificate Number: 2563.02
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 LABORATORIO CENTRAL DE BADER DE MEXICO 1 Bader de Mexico Sigma 601, Parque Industrial Delta Leon, Guanajuato C.P. 37179 MEXICO Juanita Landin Phone: 52 477
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 EQUIPO AUTOMOTRIZ AMERICANA S.A. DE C.V. Lib. Carlos Salinas de Gortari #198 Norte Cd. Frontera, Coahuila C.P., Mexico 25618 Abelardo Castilla Abelardo.Castilla@takata.com
RELIABLE ANALYSIS INC. Troy, MI for technical competence in the field of
A2LA has accredited RELIABLE ANALYSIS INC. Troy, MI for technical competence in the field of Mechanical Testing This laboratory is accredited in accordance with the recognized International ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 YANFENG GLOBAL AUTOMOTIVE INTERIOR SYSTEMS CO. LTD. YFAI Center of Excellence Laboratory 921 East 32 nd Street Holland, MI 49423 Arnie Suigussaar Phone: 616
Faurecia Interior Systems India Pvt. Ltd., Test Laboratory, Plot No. T-187, Pimpri Industrial Area (B. G. Block), Bhosari, Pune, Maharashtra
Last Amended on - Page 1 of 5 I. AUTOMOTIVE COMPONENTS 1. Component Testing (Rubber & Plastic Products) a. (Plastics/Fabric/ Soiling & Cleanability Ford FLTM BN 112-08: 2010 Daimler DBL 5399: 2007 General
Certificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
Certificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. AUTO TECHNOLOGY COMPANY Progress Drive Strongsville, OH Kevin Smith MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 AUTO TECHNOLOGY COMPANY 20026 Progress Drive Strongsville, OH 44149 Kevin Smith 440 572 7800 MECHANICAL Valid To: December 31, 2013 Certificate Number: 2563.02
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 DURHAM HOLDINGS CORPORATION INC. DBA MME TESTING 1039 Industrial Court Suwanee, GA 30024 Danny Collazo Phone: 678 730 2000 MECHANICAL Valid To: October 31,
ACCREDITED LABORATORY
A2LA has accredited THE AMERICAN ASSOCIATION FOR LABORATORY ACCREDITATION ACCREDITED LABORATORY AKRON RUBBER DEVELOPMENT LABORATORY, INC. Akron, OH for technical competence in the field of Mechanical Testing
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CONSUMER TESTING LABORATORIES, INC. 2601 SE Otis Corley Drive Bentonville, AR 72712 Stephanie Anderson Phone: 479 286 2376 MECHANICAL Valid To: September 30,
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CONSUMER TESTING LABORATORIES, INC. 2601 SE Otis Corley Drive Bentonville, AR 72712 Chessie Koko Phone: 479 286 2300 MECHANICAL Valid To: September 30, 2018
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. RELIABLE ANALYSIS INC N. Avis Drive Madison Heights, MI Alec Lang Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 RELIABLE ANALYSIS INC. 32201 N. Avis Drive Madison Heights, MI 48071 Alec Lang Phone: 248 588 9770 MECHANICAL Valid To: May 31, 2019 Certificate Number: 0386.01
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 EXOVA INC., DBA ELEMENT MATERIALS TECHNOLOGY Products Warren Laboratory 1920 Concept Dr. Warren, MI 48091-1385 N Jeri Laird Phone: 248 458 5900 x 73258 Fax:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. ACT TEST SERVICES 273 Industrial Drive Hillsdale, MI Kevin Wendt Phone: MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ACT TEST SERVICES 273 Industrial Drive Hillsdale, MI 49242 Kevin Wendt Phone: 517 439 1485 MECHANICAL Valid To: November 30, 2014 Certificate Number: 2745.01
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 1, 2, 3 CONTINENTAL AUTOMOTIVE SYSTEMS 2400 Executive Hills Blvd. Auburn Hills, MI 48326 Mr. David E. Swift Phone: 248 209 3813 Email: david.swift@continental-corporation.com
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 APPLIED TECHNICAL SERVICES, INC. 1049 Triad Court Marietta, GA 30062 Cathy Mansfield Phone 770 423 1400 cmansfield@atslab.com MECHANICAL Valid To: June 30,
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ELEMENT CLEVELAND 5405 East Schaaf Road Cleveland, OH 44131 Jeffry J Smith Phone: 216 524 1450 Jeffry.Smith@element.com MECHANICAL Valid To: October 31, 2018
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 TUV SUD AMERICA - AUBURN HILLS 1755 Atlantic Blvd. Auburn Hills, MI 48326 William (Mac) Elliott Phone: 813 284 2736 MECHANICAL Valid To: August 31, 2018 Certificate
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ELECTRICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ELEMENT MATERIALS TECHNOLOGY DETROIT - WARREN 11 MILE 1 27485 George Merrelli Drive Warren, MI 48092 Scott Stephen Karrer Phone: 586 754 9000 ext. 32900 Email:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 MABAMEX S.A. DE C.V. Blvd. El Refugio #25551 Florido 1 Seccion Tijuana, Baja California, MEXICO C.P. 22237 Galia Frez Phone: 011 52 664 627 8055 MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 MNP CORPORATION TECHNICAL AND RESEARCH SERVICES 1 (Corporate Facility) 44225 Utica Road Utica, MI 48317 Chad Clifford Phone: 586 254 1320 MECHANICAL Valid To:
Monarch #5031. Product W L T W L T
AUTOMOTIVE Monarch #5031 UL94 HF-1 listed for flame UL50E (periodic and continuous compression), UL508 and UL48 listed for gaskets and seals (recent upgrade) Widely used general purpose EPDM / CR / SBR
Ensolite IV1. Formerly MILR6130-C
AUTOMOTIVE Ensolite IV1 UL 94 V-0, V-1, HF-1 and HBF listed for flame (periodic and continuous compression) listed for gaskets and seals (recent upgrade) ASTM D 1056-07 2A1 / 2C1 grade product ASTM D 6576-07
Annex to the Accreditation Certificate D-PL according to ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-20658-01-00 according to ISO/IEC 17025:2005 Period of validity: 13.06.2018 to 12.06.2023 Holder of certificate: IMAT Shenyang
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 AUTOLIV ASP, INC. Autoliv North America 1320 Pacific Dr. Auburn Hills, MI 48326 Warren Short 248 276 3840 warren.short@autoliv.com MECHANICAL Valid To: April
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 DEKRA IST RELIABILITY SEVICES INC. No. 22 Puding Rd., East Dist. Hsinchu City 300, Taiwan, R.O.C. Phone: 886 3 579 5766 ext 7100 Mr. General Lee general.lee@dekra-ist.com
Green Polymeric Materials Inc.
Green Polymeric Materials Inc. Recycled Rubber Filled Soy Polyurethane Using Soy And Recycled Tire Rubber To Enhance Clean Automotive Technologies has been in business since 2002 GPMis a manufacturer of
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCI-LAB MATERIALS TESTING INC. 150 Trillium Drive Kitchener, Ontario, CANADA, N2E 2C4 Richard Isaacs Phone: 519 895 0500 MECHANICAL Valid To: March 31, 2019
Monarch #5032. Product W L T W L T
AUTOMOTIVE Monarch #5032 UL94 HF-1 listed for flame UL50E (periodic and continuous compression), UL508 and UL48 listed for gaskets and seals (recent upgrade) Widely used general purpose EPDM / CR / SBR
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CONTINENTAL AUTOMOTIVE SYSTEMS 570 Capital Drive Lake Zurich, IL 60047 Mr. Ken Klimek (Authorized Representative) Phone: 847-862-0131 Email: ken.klimek@continental-corporation.com
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 MGA RESEARCH CORPORATION 4 446 Executive Drive Troy, MI 48083 Helen Kaleto Phone: 248 577 5001 Email: helen.kaleto@mgaresearch.com Website: www.mgaresearch.com
Technology on Your Wavelength
Standard forms of delivery, ex Lebanon, PA Sheets Thickness: Length: Width: 25 mm and 12.5 mm Custom thicknesses available on request 59" (1,500 mm) 3.3' (1,000 mm) Max. static load 124.0 Peak loads (rare,
Ensolite IR41. Chrysler Chrysler MSAY 516 Type 1 Exception to 25% compression deflection Meets at thicknesses of (1/8 ) (3.
AUTOMOTIVE Ensolite IR41 94 HF-1 listed for flame 50E (periodic and continuous compression) listed for gaskets and seals (recent upgrade) Manufactured in a variety of thicknesses Widely used skin 2 sides
SGS India Private Limited, Consumer Testing Services-Laboratory, No. 134, 2 nd Floor, Sivashakthi Nagar, College Road, Tirupur, Tamil Nadu
Last Amended on 03.12.2015 Page 1 of 7 I. TEXTILE MATERIALS 1. Yarn) Linear Density SO-IN-CTS-C02-QU-001 (Version 3.2) ASTM D1907/D1907 M-12 ASTM D 1059: 2001 ISO 7211-5: 1984 BS ISO 7211-5: 1984 ISO 2060:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 TUV SUD CANADA INC. 1229 Ringwell Drive Newmarket, Ontario, Canada, L3Y 8T8 William (Mac) Elliott Phone: 813 284 2736 melliott@tuvam.com www.tuv-sud.ca ELECTRICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 FOOD SERVICE TECHNOLOGY CENTER 12949 Alcosta Blvd Suite 101 San Ramon, CA 94583 Richard Swierczyna Phone: 925-866-2844 Email: rswierczyna@fishnick.com MECHANICAL
MIRTA-KONTROL d.o.o. LABORATORY DEPARTMENT
Textiles 1) Fibre composition - Qualitative analysis (Internal MK method) 2) Fibre composition - Binary fibre mixtures (EN ISO 1833-series) 3) Fibre composition - Ternary fibre mixtures (EN ISO 1833-2)
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 METTLER TOLEDO (INDUSTRIAL) 1900 Polaris Parkway Columbus, OH 43240 Frank Gardone Phone: 412 213 2263 CALIBRATION Valid To: April 30,
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 MONTOI, S.A. DE C.V. Libramiento Noreste Km.27 Escobedo, CP 66052 Nuevo Leon, Mexico Rodolfo Caballero Phone: 52-818154030 Email: Rodolfo.Caballero@Mattel.com
Ahmedabad Textile Industry s Research Association (ATIRA), P.O. Ambawadi Vistar, Ahmedabad, Gujarat
Last Amended on - Page 1 of 13 I. TEXTILE MATERIALS 1. Fibre Micronaire Length Length uniformity Strength Elongation% Short fibre % Colour Whiteness (Rd) Colour Yellowness (+b) Neps/g Neps size SCN/g SCN
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SOUTHWEST RESEARCH INSTITUTE Office of Automotive Engineering Fuels and Lubricants Research Division 6220 Culebra Road, P.O. Drawer 28510 San Antonio, TX 78228-0510
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ELECTRICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 EMCCONS DR. RASEK GMBH & CO. KG 1 Moggast, Boelwiese 8 91320 Ebermannstadt, GERMANY Dr.-Ing. Andreas Abach (Primary Contact) Phone: + 49 9194 9016 Email: a.abach@emcc.de
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 EMCCONS DR. RASEK GMBH & CO. KG 1 Boelwiese 8 91320 Ebermannstadt, GERMANY Dr.-Ing. Andreas Abach (Primary Contact) Phone: + 49 9194 7262-0 Email: a.abach@emcc.de
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 INDEPENDENT ENGINEERING LABORATORIES, INC. 1 2400 E. South Street Jackson, MI 49201 Ms. Jessica Stremich Phone: 517 788 6590 E-mail: IELaccounting@ielinc.com
MITRAS MATERIALS GMBH
MITRAS MATERIALS GMBH Friedrich-Ochs-Str. 2 92637 Weiden/Opf. Tel.: 0961 / 89-810 / 89-812 Fax: 0961 / 89-672 Directory of services L a b o r a t o r y MITRAS MATERIALS GMBH Edition 02/18 Rev. 08 page
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ZF GLOBAL ELECTRONICS CZESTOCHOWA ENGINEERING CENTER VALIDATION LABORATORY 1 Branch Laboratory ul. Pulaskiego 78 Czestochowa, Poland PL-42-200 Pawel Kantor,
Hari Shankar Singhania Elastomer & Tyre Research Institute, HASETRI, Plot No. 437, R&D Center, Hebbal Industrial Area, Mysuru, Karnataka
Page 1 of 11 CHEMICAL TESTING I. RUBBER AND RUBBER PRODUCTS 1. Polymer/ Elastomeric materials 2. Fillers Heat Loss of carbon black Ash content ASTM D5667 0.1-45 % ISO 247 Dirt Content ASTM D1278 0.1-10
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ELITE ELECTRONIC ENGINEERING, INC. 1 1516 Centre Circle Downers Grove, IL 60515 Larry Brooks (QA Manager) Phone: 630 495 9770 ext. 166 Email: lbrooks@elitetest.com
Accreditation No: LAB 007. SGS Consumer & Retail Services - Laboratory H-3/3, Sector 5, Korangi Industrial Area, Karachi 74900, Pakistan.
F-0602 Issue : 100815 Accreditation No: Awarded to SGS Consumer & Retail Services - Laboratory H-33, Sector 5, Korangi Industrial Area, Karachi 74900, Pakistan. The scope of accreditation is in accordance
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. ZF GLOBAL ELECTRONICS- VALIDATION LABORATORY Carl-Spaeter-Str. 8 Koblenz, Germany 56070
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ZF GLOBAL ELECTRONICS- VALIDATION LABORATORY Carl-Spaeter-Str. 8 Koblenz, Germany 56070 Werner Dillbahner, Dipl.-Ing. (FH), (Authorized Representative) Phone:
Monarch. Monarch #5013. General Info
AUTOMOTIVE Monarch #5013 UL94 HF-1 and HBF listed for flame UL50E (periodic and continuous compression), UL508 and UL48 listed for gaskets and seals (recent upgrade) Widely used general purpose blend ASTM
Services Directory updated: January 2016
Kulmbacher Straße 76 95213 Münchberg Tel. 09281/409-8720 Fax 09281/409-8799 E-mail: pruefamt@hof-university.de Director: Prof. Oliver Lottes Services Directory updated: January 2016 A) Mechanical and Technological
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ELEMENT MATERIALS TECHNOLOGY MINNEAPOLIS LLC (A subsidiary of Element Materials Technology Minneapolis Inc.) 9725 Girard Avenue South Minneapolis, MN 55431
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 METTLER TOLEDO (INDUSTRIAL) 1900 Polaris Parkway Columbus, OH 43240 Frank Gardone Phone: 412 213 2263 CALIBRATION Valid To: April 30,
UL S EXPEDITED COMPLIANCE SERVICES APPAREL
APPAREL APPAREL (1 COLOR / 1SIZE) Tier 1 - Regulatory - All $150 $90 Flammability General Wearing Apparel 16 CFR 1610 Flammability - Vinyl 16 CFR 1611 Care Labeling 16 CFR 423, ASTM D 3136, ASTM D 5489
COMMERCIAL ITEM DESCRIPTION SEAT COVER CLOTH, POLYESTER OR NYLON, WATER-RESISTANT
[INCH-POUND] May 14, 1999 COMMERCIAL ITEM DESCRIPTION SEAT COVER CLOTH, POLYESTER OR NYLON, WATER-RESISTANT The General Services Administration has authorized the use of this commercial item description
Texin 245 Covestro PUR Thermoplastic Polyurethane Elastomer (Polyester) Action Saturday, October 22, 2016 Units English Legend (Open) General Information Product Description Texin 245 resin is an aromatic
Geomembrane Test Methods
Appendix 2 Geomembrane Test Methods AMERICAN SOCIETY FOR TESTING AND MATERIALS (arranged by number) ASTM D-5 ASTM D-36 ASTM D-256 ASTM D-412 ASTM D-413 ASTM D-471 ASTM D-570 ASTM D-638 ASTM D-696 ASTM
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Charter Coating Service (2000) Ltd. Suite
Certificate of Accreditation
ISO/IEC 17025:2005 Certificate of Accreditation Certificate Number L2195 Exova, Inc. Anaheim 3883 East Eagle Drive Anaheim CA 92807 has met the requirements set forth in L-A-B s policies and procedures,
Name of Laboratory : SGS CAMBODIA LABORATORY Accreditation Number : Testing : 1076 A-C, Street 371, Sangkat Stung Meanchey, Khan Meanchey,
Name of Laboratory Contact Person : Mr. Sopheak Chea Phone : + 855 23 967 888 Fax : - Email : Sopheak.Chea@sgs.com 1 Textiles - Colour fastness to light : ISO 105-B02 : 2014 Xenon-Arc BS EN ISO 105-B02
Material Selection Guide
Material Selection Guide Markets Communications Computers Transportation Electronics Appliances Medical Devices Industrial Applications LCD Gaskets Battery Pressure Pads Speaker Gaskets Environmental Seals
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SOUTHWEST RESEARCH INSTITUTE Office of Automotive Engineering Fuels and Lubricants Research Division and the Engine, Emissions and Vehicle Research Division
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. UL 3480 Windquest Drive Holland, MI Dan Kolean Phone: MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 UL 3480 Windquest Drive Holland, MI 49424 Dan Kolean Phone: 616 928 0791 MECHANICAL Valid To: July 31, 2018 Certificate Number: 2709.01 In recognition of the
MATERIAL DATA SHEET* ALPANA d.o.o.
MATERIAL DATA SHEET* ALPANA d.o.o. Contents H-Pur Material Data Sheet... 2 LT-Pur Material Data Sheet... 3 S-Pur Material Data Sheet... 4 XH-Pur Material Data Sheet... 5 XSH-Pur Material Data Sheet...
Antifreeze Resistant Fatigue Resistant Gasoline Resistance Automotive Under the Hood ASTM D 4066 PA012G30 ASTM D 6779 PA012G30
Vydyne R530H Nylon resins are general purpose polyamide, heat stabilized, hydrolysis resistant, 30% glass fiber reinforced resins. Available in natural and black. It is specifically designed to maximize
Automotive Testing and Engineering Services
UL PERFORMANCE MATERIALS Automotive Testing and Engineering Services OEM Testing according to OEM Delivery Specifications performance materials for automotive applications Automotive Supplier Raw Materials
Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-19722-01-00 according to DIN EN ISO/IEC 17025:2005 Holder of certificate: Institut für Lacke und Farben Magdeburg ggmbh Fichtestraße
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 BUREAU VERITAS CONSUMER PRODUCTS SERVICES MEXICO, S.A. DE C.V.-PUEBLA 1 Circuito del Sol 3905-01 Colonia Nuevo Amanecer Puebla, Puebla 72400, Mexico Alicia
STS Directory Accreditation number: STS 0228
International standard: ISO/IEC 17025:2005 Swiss standard: SN EN ISO/IEC 17025:2005 TESTEX AG Schweizer Textilprüfinstitut Gotthardstrasse 61 CH-8027 Zürich Head: Responsible for MS: Dr. Jean-Pierre Haug
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 YANFENG GLOBAL AUTOMOTIVE INTERIOR SYSTEMS CO., LTD. AUTOMOTIVE TRIM & ELECTRONICS TESTING LABORATORY. China Technical Center No. 1001 North Qinzhou Rd. Shanghai,
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 EMPIRE SCALE CORPORATION d.b.a. PRECISION SCALE & BALANCE d.b.a. EMPIRE SCALE & BALANCE 140 Rotech Drive Lancaster, NY 14086 Margery
UL Quality Assurance Private Limited, A-12,Sector-34, Infocity Phase-1,Gurgaon; Haryana. Discipline Mechanical Testing Issue Date
Last Amended on - Page 1 of 22 I. TEXTILE MATERIALS 1. Textile- Fabric/Garment Tensile Strength Strip test BS EN ISO 13934-1: 2013 EN ISO 13934-1: 2013 ISO 13934-1: 2013 ASTM D5035 2011 AS 2001.2.3.1:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. UL 2528 Cathy Ln Jasper, IN Brian Truelove Phone: MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 UL 2528 Cathy Ln Jasper, IN 47546 Brian Truelove Phone: 812 556 5094 MECHANICAL Valid To: July 31, 2018 Certificate Number: 2709.03 In recognition of the successful
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ELITE ELECTRONIC ENGINEERING, INC. 1 1516 Centre Circle Downers Grove, IL 60515 Stephen Laya (QA Manager) Phone: 630 495 9770 ext. 119 Email: sglaya@elitetest.com
Accreditation Scope of Consumer & Retail Services Laboratory, Karachi, Pakistan
All Textile MaterialsProduct F-0602 Issue : 100815 Testing Laboratory. Accreditation Scope of Consumer & Retail Services Laboratory, Karachi, Pakistan Permanent laboratory premises H- 33, Korangi Industrial
11 BS 4468 ; Withdrawn and replaced by BS En : 1994, ISO 1974 : 1990( 2012). Determination of tearing resistance ( Elmendorf method )
S No Standrads Name 1 ASTM SEC 7 - Textiles 2 ASTM SEC 8 - Plastics 3 ASTM SEC 9 - Rubber 4 ASTM SEC 10 - Electrical Insulation and Electronics 5 ASTM SEC 4 VOL 04.04:2013 (construction: volume 04.04:Roofing
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 EXPONENT, INC.¹ 3440 Market Street Suite 600 Philadelphia, PA 19104 Ryan Siskey Phone: 215 594 8896 Email: rsiskey@exponent.com MECHANICAL Valid To: June 30,
Labthink Instruments Co. Limited http://www.labthinktestinstruments.com/ We are engaged in manufacturing, supplying, and exporting a comprehensive gamut of Testing Equipment like Permeability Test, Tensile
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 TTL LABORATORIES - A DIVISION OF 41 Illinois Avenue Warwick, RI 02888-3007 Ben Miranda Phone: 401 562 1333 MECHANICAL Valid To: March 31, 2019 Certificate Number:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 & ANSI/NCSL Z540-1-1994 EUSTIS CO., INC./PYROCOM CALIBRATION LAB 12407-B Mukilteo Speedway Lynnwood, WA 98087 Bill LeMesurier Phone: 425 423 9996 CALIBRATION
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 RIVERVIEW CALIBRATION SERVICES, LTD 5706 Veto Road Belpre, OH 45714 J. Michael Pennell Phone: 740 678 8625 CALIBRATION Valid To: July
PSI Anti-Corrosion Tape
General information Technical specifications Requirement evaluation Application instructions Certificates PSI Anti-Corrosion Tape 8 Pipeline Accessories 85 The Systems PSI anti-corrosion tapes have been
Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18869-01-00 according to DIN EN ISO/IEC 17025:2005 Holder of certificate: ilf Forschungs- und Entwicklungsgesellschaft Lacke
DOWNLOAD OR READ : EN ISO 105 B06 XNCQAY PDF EBOOK EPUB MOBI
DOWNLOAD OR READ : EN ISO 105 B06 XNCQAY PDF EBOOK EPUB MOBI Page 1 Page 2 en iso 105 b06 xncqay en iso 105 b06 pdf en iso 105 b06 xncqay en. Format Language; std 1 88: PDF std 2 88: Paper CHF 88; Buy
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 NORTHERN BALANCE AND SCALE, INC. 9556 W. Bloomington Freeway Bloomington, MN 55431 Joey Kaluser Phone: 952 881 7716 CALIBRATION Valid