Certificate of Accreditation

Size: px
Start display at page:

Download "Certificate of Accreditation"

Transcription

1 PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares that Organization is accredited in accordance with the recognized International Standard: ISO/IEC 17025:2005 This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (as outlined by the joint ISO-ILAC-IAF Communiqué dated April 2017): Mechanical Testing (As detailed in the supplement) Accreditation claims for such testing and/or calibration services shall only be made from addresses referenced within this certificate. This Accreditation is granted subject to the system rules governing the Accreditation referred to above, and the Organization hereby covenants with the Accreditation body s duty to observe and comply with the said rules. For PJLA: Initial Accreditation Date: Issue Date: Expiration Date: Septmeber 27, 2016 Novmeber 29, 2018 March 31, 2021 Tracy Szerszen President/Operations Manager Perry Johnson Laboratory Accreditation, Inc. (PJLA) 755 W. Big Beaver, Suite 1325 Troy, Michigan Accreditation No.: Certificate No.: L The validity of this certificate is maintained through ongoing assessments based on a continuous accreditation cycle. The validity of this certificate should be confirmed through the PJLA website: Page 1 of 12

2 ITEMS, MATERIALS OR PRODUCTS TESTED Textile, Metal, Electrical, and Plastic Components Adhesion Textile, Metal, Electrical, and Plastic Components Chemical Resistance Adhesion (Bonding) Adhesion (Cross Hatch, X- Cut) Acid & Alkali Chemicals (Durability) Chemical Resistance - Hot Plate STANDARD METHOD OR TECHNIQUE USED GMW3368 ASTM D3359 BMW AA P177 BMW PA P028 DCX LP463PB1501 DIN EN ISO 2409 Fiat Ford BI Ford BI GM9071P GM9502P GMW14829 TSH 1503G Volvo Volvo VW QPR015 TSH 1509G TSH 1530G ASTM D1308 Ford BN GM9900P GMW14333 GMW14334 ISO ISO NES M0133 TSH 1509G Volvo 1026 Volvo 8177 Volvo Issue: 11/2018 This supplement is in conjunction with certificate #L Page 2 of 12

3 ITEMS, MATERIALS OR PRODUCTS TESTED Textile, Metal, Electrical, and Plastic Components Chemical Resistance Textile, Metal, Electrical, and Plastic Components Corrosion Fuel Resistance Ford BO GM9500P GM9501P TSH 1508G Oil Immersion ASTM D Solvent Resistance DCX LP463PB0701 Ford BI GM9509P GMW15891 Spotting (Acid) Spotting (General Fluids) Spotting (Water & Soap) Staining Sweat Test (Perspiration) Corrosion Cycle (Common) DCX LP463PB5301 (a-c) Ford BI Ford BI GM9069P GM9736P DCX LP463PB Ford BI GMW14445 DCX LP463PB Ford BI Chrysler LP-463PB Ford BO ASTM D2803 ASTM D1654 Chrysler LP-463PB Ford L-3190 Ford BI Ford CETP: L-467 GMW15282 GM 9102P GM 9540P GMW14872 Issue: 11/2018 This supplement is in conjunction with certificate #L Page 3 of 12

4 ITEMS, MATERIALS OR PRODUCTS TESTED Textile, Metal, Electrical, and Plastic Components Corrosion Textile, Metal,Electrical, and Plastic Components Density Plastic Components Durability Corrosion Cycle (Common) Corrosion Cycle (Scab) Salt Spray Resistance ISO ISO 9227 SAE J2334 SAE J2635 TSH 1555G Volvo 1027 Volvo 1375 Volvo VW PV1210 GM9511P ASTM B117 Ford BI GM4298P ISO 9227 NES M0140 TSH 1552G Density DIN EN ISO GMW3182 Durability BMW GS BMW GS Chrysler DBL 5416 Chrysler MS Chrysler MS JP9-7 Chrysler MS JP9-8 Chrysler MS PA40-1 Chrysler MS-DC-256 Chrysler MS-PE-3-2 Chrysler MS-PZ-3-1 Chrysler PBO SC361 Chrysler PF Chrysler PS-8810 E-Z-GO GS FCA MS FCA MS FCA MS Ford ESB M15P24 Ford WSS M15P4 Ford WSS-M2P122-E1/E2/E3/E4 Ford WSS M2P177-C1/C2/C3 Issue: 11/2018 This supplement is in conjunction with certificate #L Page 4 of 12

5 ITEMS, MATERIALS OR PRODUCTS TESTED Plastic Components Durability Durability Ford WSS-M2P180-B/C/D Ford WSS-M2P181-C Ford WSS-M2P183-E1 Ford WSS-M2P188-B1 GM2617M GM2739M GM2740M GM4350M GM4388M GM4497M GMN10083 GMW14444 GMW14573 GMW14650 GMW14671 GMW14797 GMW14867 GMW15516 GMW16172 GMW16876 GMW17084 GMW17105 GMW3005 GMW3041 HES D6500 Honda 0096Z-TR Honda 0096Z-TY Hyundai MS Hyundai MS Hyundai MS Hyundai MS JDM-F11 NES M0141 NES M5081 Issue: 11/2018 This supplement is in conjunction with certificate #L Page 5 of 12

6 ITEMS, MATERIALS OR PRODUCTS TESTED Plastic Components Durability Durability STANDARD METHOD OR TECHNIQUE USED STD STD Subaru TS TSH 3130G TSH 3131G VW TL211 VW TL227 VW TL52311 VW TL52231 VW TL52625 VW TL52631 VW TL52690 Ford WSS-M2P181-C Ford WSS-M2P183-E1 Ford WSS-M2P188-B1 GM2617M GM2739M GM2740M GM4350M GM4388M GM4497M GMN10083 GMW14444 GMW14573 GMW14650 GMW14671 GMW14797 GMW14867 GMW15516 GMW16172 GMW16876 GMW17084 GMW17105 GMW3005 GMW3041 Issue: 11/2018 This supplement is in conjunction with certificate #L Page 6 of 12

7 ITEMS, MATERIALS OR PRODUCTS TESTED Plastic Components Durability Plastic Components Environmental Cycling Durability Cold Cracking Dimensional Stability Environmental Cycling (Common) HES D6500 Honda 0096Z-TR Honda 0096Z-TY Hyundai MS Hyundai MS Hyundai MS Hyundai MS JDM-F11 NES M0141 NES M5081 STD STD Subaru TS TSH 3130G TSH 3131G VW TL211 VW TL227 VW TL52311 VW TL52231 VW TL52625 VW TL52631 VW TL52690 DCX LP463PB Ford BI GM9505P Ford BN GM9452P BMW AA P276E BMW PR DCX LP463CB10-01 Ford BQ GMW14124 LP463PB Issue: 11/2018 This supplement is in conjunction with certificate #L Page 7 of 12

8 ITEMS, MATERIALS OR PRODUCTS TESTED Plastic Components Environmental Cycling Plastic Components Flammability Plastic Components Flex Plastic Components Hardness Plastic Components Heat Aging Environmental Cycling (Common) NES M0132 NES M0153 TSH 1511G VW PV1200 VW PV2005 Environmental Life Cycle DCX PF-9007 App. B Para 2.7 Flammability ASTM D635 DCX LP463KC1301 Ford BN GM9070P ISO 3795 NES M0094 SAE J369 Bend Test ASTM D522-B (Cylindrical Mandrel) Ford BI GM9503P GMW16746 LP463PB LP463PB Flex DIN EN ISO 178 Hardness by Pencil ASTM D3363 TSH 1539G Hardness GM9506P (Common) GM9507P Heat Aging ASTM D ASTM D3574-K BMW AA-0026 BMW AA P275E DCX LP463TB DIN Issue: 11/2018 This supplement is in conjunction with certificate #L Page 8 of 12

9 ITEMS, MATERIALS OR PRODUCTS TESTED Plastic Components Humidity Plastic Components Impact Humidity Resistance (Common) Humidity Resistance Humidity (Water Fog) ASTM D2247 Ford BQ ASTM D1735 DCX LP463PB GM4465P GMW14729 Hydrolysis Ford BI Water Absorption ASTM D Chip Resistance Impact (Common) Impact (Indentation) ASTM D3170 BMW AA P192 Chrysler LP463-PB DCX LP463PB GM9508P GMW14700 ISO SAE J400 Volvo 1024 Volvo 7132 DCX LP.7N022 Ford BO GM9032P ISO NES M0134 VW PV 3905 ASTM D3574-B DCX LP463CB1501 Ford BO GMW ISO 4532 JIS K5400 TSH 1504G Issue: 11/2018 This supplement is in conjunction with certificate #L Page 9 of 12

10 ITEMS, MATERIALS OR PRODUCTS TESTED Plastic Components Impact Plastic Components Mechanical Property Plastic Components Odor Plastic Components Surface Quality Impact (Instrumented) Compression Deflection ASTM D3763 ASTM D5420 Ford BO GM9904P ISO ASTM D (ambient) ASTM D3574-C Compression Set ASTM D Peel Sample Prep Shear Tear Tensile Vibration Odor Color Change (Visual) Color (Instrumental) DCX LP463TB Ford BN ISO ASTM D1654 GM9102P GMW15282 DCX LP463TB GMW3371 ASTM D3574-F ASTM D5587 ASTM D638 ASTM D3574-a-f&k Ford BN GMW3010 NES M0147 DCX PF-8243 DCX PF-8982 (para 2.5) DCX PF-9007 (app. B para 2.3) JIS D1601 SP Ford BO GM 9696P NES M0160 SAE J1351 VDA 270 GM9131P ISO 105-A02 ASTM E805 Ford BI GM9741P HES 6501 ISO SAE J1545 Volvo 1026 Volvo 5172 Issue: 11/2018 This supplement is in conjunction with certificate #L Page 10 of 12

11 ITEMS, MATERIALS OR PRODUCTS TESTED Plastic Components Surface Quality Plastic Components Surface Wear Properties Dry Film Thickness Gloss (Instrumental) Print Resistance (Blocking) Abrasion-Taber Crock Mar Resistance Scratch Resistance ASTM D1005 Ford BI ISO 2808 ASTM D523 Ford BI TSH 1519G Volvo Ford BI Ford BN GM9141P SAE J912 TSH 1501G ASTM D4060 ASTM D6037 DCX LP463KB Ford BN GM9515P GMW3208 GMW15487 SAE J1530 SAE J1847 DCX LP463PB Ford BN GM9033P SAE J861 Volvo 1026 Volvo 8434 ASTM D6037 DCX LP 463PB Ford BI Chrysler LP463-DD Ford BN GMN3943 GMW14688 GMW14698 GMW14130 Issue: 11/2018 This supplement is in conjunction with certificate #L Page 11 of 12

12 ITEMS, MATERIALS OR PRODUCTS TESTED Plastic Components Surface Wear Properties Plastic Components Water Immersion Plastic Components Water Impingement Plastic Components Weathering Scuff Wear Resistance Ford BN GM9150P GM9911P NES M0136 NES M0159 Water Immersion Resistance ASTM D870 DCX LP463PB Ford BI GM4466P TSH 1505G Thermal Shock Water Jet Resistance Weathering (Accelerated) Ford BI GM9525P GMW15919 BMW AA-P290 Chrysler PBODC361 DIN EN ISO Fiat Ford BO GM9531P GMW16745 Hyundai MS Mercedes DBL-5416 Volvo VW PV 1503-C ASTM D7869 SAE J2412 SAE J2527 VW PV3929 VW PV The presence of a superscript F means that the laboratory performs testing of the indicated parameter at its fixed location. Example: Outside Micrometer F would mean that the laboratory performs this testing at its fixed location. Issue: 11/2018 This supplement is in conjunction with certificate #L Page 12 of 12

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 GHESQUIERE PLASTIC TESTING, INC. 20450 Harper Avenue Harper Woods, MI 48225 Douglas Leggat Phone: 313 885 3535 Fax: 313 885 1771 E-mail: doug@gptesting.com

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. AUTONEUM NORTH AMERICA, INC Haggerty Rd. Novi, MI Jian Pan Phone: MECHANICAL

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. AUTONEUM NORTH AMERICA, INC Haggerty Rd. Novi, MI Jian Pan Phone: MECHANICAL SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 AUTONEUM NORTH AMERICA, INC. 29293 Haggerty Rd. Novi, MI 48331 Jian Pan Phone: 248 324 2264 MECHANICAL Valid To: October 31, 2017 Certificate Number: 1745.02

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. AUTO TECHNOLOGY COMPANY Progress Drive Strongsville, OH Kevin Smith MECHANICAL

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. AUTO TECHNOLOGY COMPANY Progress Drive Strongsville, OH Kevin Smith MECHANICAL SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 AUTO TECHNOLOGY COMPANY 20026 Progress Drive Strongsville, OH 44149 Kevin Smith 440 572 7800 MECHANICAL Valid To: December 31, 2019 Certificate Number: 2563.02

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 GUILFORD PERFORMANCE TEXTILES KENANSVILLE 1754 NC 903 / Highway 11 North Kenansville, NC 28349 Teresa Carter Phone: 910 296 5314 MECHANICAL Valid To: May 31,

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 NATIONAL EXPOSURE TESTING, INC. 3211 Centennial Road Sylvania, OH 43560 Christa Lammers Phone: 419 841 1065 MECHANICAL Valid To: October 31, 2016 Certificate

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 AUTONEUM NORTH AMERICA, INC. 480 West 5 th Street Bloomsburg, PA 17815 Justine Danilowicz Phone: 570 316 6078 MECHANICAL Valid To: April 30, 2019 Certificate

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 NATIONAL EXPOSURE TESTING, INC. 3211 Centennial Road Sylvania, OH 43560 Christa Lammers Phone: 419 841 1065 MECHANICAL Valid To: October 31, 2018 Certificate

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 HP PELZER MATERIALS TESTING LABORATORY 1175 Crooks Road Troy, MI 48084 Renata Machnik Phone: 248 280 2500 x176 MECHANICAL Valid To: November 30, 2018 Certificate

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. AUTO TECHNOLOGY COMPANY Progress Drive Strongsville, OH Kevin Smith MECHANICAL

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. AUTO TECHNOLOGY COMPANY Progress Drive Strongsville, OH Kevin Smith MECHANICAL SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 AUTO TECHNOLOGY COMPANY 20026 Progress Drive Strongsville, OH 44149 Kevin Smith 440 572 7800 MECHANICAL Valid To: December 31, 2013 Certificate Number: 2563.02

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: Torreón, Coahuila, México C.P. 27019 (Hereinafter

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. ACCULAB INC Railroad Drive El Paso, TX Jose Gonzalez Phone: MECHANICAL

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. ACCULAB INC Railroad Drive El Paso, TX Jose Gonzalez Phone: MECHANICAL SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ACCULAB INC. 9900 Railroad Drive El Paso, TX 79924 Jose Gonzalez Phone: 915 751 1000 MECHANICAL Valid To: June 30, 2020 Certificate Number: 2692.01 In recognition

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 EQUIPO AUTOMOTRIZ AMERICANA S.A. DE C.V. Lib. Carlos Salinas de Gortari #198 Norte Cd. Frontera, Coahuila C.P., Mexico 25618 Abelardo Castilla Abelardo.Castilla@takata.com

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORYACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares

More information

President For the Accreditation Council Certificate Number Valid to August 31, 2008

President For the Accreditation Council Certificate Number Valid to August 31, 2008 A2LA has accredited THE AMERICAN ASSOCIATION FOR LABORATORY ACCREDITATION ACCREDITED LABORATORY PEARL LEATHER FINISHERS, INC. TESTING LABORATORY Johnstown, NY for technical competence in the field of Mechanical

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: Mexical Metrología, S.A. de C.V. Tecnología de Materiales,

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: UNEX/HYTORC, 333 Route 17 North, Mahwah, NJ 07430

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 YANFENG GLOBAL AUTOMOTIVE INTERIOR SYSTEMS CO. LTD. YFAI Center of Excellence Laboratory 921 East 32 nd Street Holland, MI 49423 Arnie Suigussaar Phone: 616

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: Monterrey, Nuevo León, 64920 (Hereinafter called the

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 RELIABLE ANALYSIS SHANGHAI, INC. No. 10, 12A, 24 Lane 1365 Kang Qiao Road East Shanghai, People s Republic of China, 201319 Mr. Victor Wen Phone: 86 21 6818

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 LABORATORIO CENTRAL DE BADER DE MEXICO 1 Bader de Mexico Sigma 601, Parque Industrial Delta Leon, Guanajuato C.P. 37179 MEXICO Juanita Landin Phone: 52 477

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. ACCULAB INC Railroad Drive El Paso, TX Vladimir Juarez Phone: MECHANICAL

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. ACCULAB INC Railroad Drive El Paso, TX Vladimir Juarez Phone: MECHANICAL SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ACCULAB INC. 9900 Railroad Drive El Paso, TX 79924 Vladimir Juarez Phone: 915 751 1000 MECHANICAL Valid To: June 30, 2016 Certificate Number: 2692.01 In recognition

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. ACT TEST SERVICES 273 Industrial Drive Hillsdale, MI Kevin Wendt Phone: MECHANICAL

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. ACT TEST SERVICES 273 Industrial Drive Hillsdale, MI Kevin Wendt Phone: MECHANICAL SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ACT TEST SERVICES 273 Industrial Drive Hillsdale, MI 49242 Kevin Wendt Phone: 517 439 1485 MECHANICAL Valid To: November 30, 2014 Certificate Number: 2745.01

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 DURHAM HOLDINGS CORPORATION INC. DBA MME TESTING 1039 Industrial Court Suwanee, GA 30024 Danny Collazo Phone: 678 730 2000 MECHANICAL Valid To: October 31,

More information

Faurecia Interior Systems India Pvt. Ltd., Test Laboratory, Plot No. T-187, Pimpri Industrial Area (B. G. Block), Bhosari, Pune, Maharashtra

Faurecia Interior Systems India Pvt. Ltd., Test Laboratory, Plot No. T-187, Pimpri Industrial Area (B. G. Block), Bhosari, Pune, Maharashtra Last Amended on - Page 1 of 5 I. AUTOMOTIVE COMPONENTS 1. Component Testing (Rubber & Plastic Products) a. (Plastics/Fabric/ Soiling & Cleanability Ford FLTM BN 112-08: 2010 Daimler DBL 5399: 2007 General

More information

AUTOMOTIVE TESTS. BMW AUTOMOTIVE Pile Yarn Thickness $ 25.00

AUTOMOTIVE TESTS. BMW AUTOMOTIVE Pile Yarn Thickness $ 25.00 AUTOMOTIVE TESTS BMW AUTOMOTIVE3.2.4.2 Pile Yarn Thickness $ 25.00 BMW 3.2.10 Imprint Behavior Without Foam Impression Depth @ 60 Minutes and 24 hours (DIN 54316/EN20 105 A02) $ 75.00 BMW 3.2.10.2 Tested

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. SCHAP LABORATORY SERVICES, LLC Taft Road, Unit 5 Spring Lake, MI Erik Johnson Phone:

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. SCHAP LABORATORY SERVICES, LLC Taft Road, Unit 5 Spring Lake, MI Erik Johnson Phone: SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCHAP LABORATORY SERVICES, LLC 17309 Taft Road, Unit 5 Spring Lake, MI Erik Johnson Phone: 616 846 6530 MECHANICAL Valid To: June 30, 2020 Certificate Number:

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Charter Coating Service (2000) Ltd. Suite

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 APPLIED TECHNICAL SERVICES, INC. 1049 Triad Court Marietta, GA 30062 Cathy Mansfield Phone 770 423 1400 cmansfield@atslab.com MECHANICAL Valid To: June 30,

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 1, 2, 3 CONTINENTAL AUTOMOTIVE SYSTEMS 2400 Executive Hills Blvd. Auburn Hills, MI 48326 Mr. David E. Swift Phone: 248 209 3813 Email: david.swift@continental-corporation.com

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18869-01-00 according to DIN EN ISO/IEC 17025:2005 Holder of certificate: ilf Forschungs- und Entwicklungsgesellschaft Lacke

More information

RELIABLE ANALYSIS INC. Troy, MI for technical competence in the field of

RELIABLE ANALYSIS INC. Troy, MI for technical competence in the field of A2LA has accredited RELIABLE ANALYSIS INC. Troy, MI for technical competence in the field of Mechanical Testing This laboratory is accredited in accordance with the recognized International ISO/IEC 17025:2005

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 INDEPENDENT ENGINEERING LABORATORIES, INC. 1 2400 E. South Street Jackson, MI 49201 Ms. Jessica Stremich Phone: 517 788 6590 E-mail: IELaccounting@ielinc.com

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. RELIABLE ANALYSIS INC N. Avis Drive Madison Heights, MI Alec Lang Phone:

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. RELIABLE ANALYSIS INC N. Avis Drive Madison Heights, MI Alec Lang Phone: SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 RELIABLE ANALYSIS INC. 32201 N. Avis Drive Madison Heights, MI 48071 Alec Lang Phone: 248 588 9770 MECHANICAL Valid To: May 31, 2019 Certificate Number: 0386.01

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 EXOVA INC., DBA ELEMENT MATERIALS TECHNOLOGY Products Warren Laboratory 1920 Concept Dr. Warren, MI 48091-1385 N Jeri Laird Phone: 248 458 5900 x 73258 Fax:

More information

ACCREDITED LABORATORY

ACCREDITED LABORATORY A2LA has accredited THE AMERICAN ASSOCIATION FOR LABORATORY ACCREDITATION ACCREDITED LABORATORY AKRON RUBBER DEVELOPMENT LABORATORY, INC. Akron, OH for technical competence in the field of Mechanical Testing

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CONTINENTAL AUTOMOTIVE SYSTEMS 570 Capital Drive Lake Zurich, IL 60047 Mr. Ken Klimek (Authorized Representative) Phone: 847-862-0131 Email: ken.klimek@continental-corporation.com

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 TUV SUD AMERICA - AUBURN HILLS 1755 Atlantic Blvd. Auburn Hills, MI 48326 William (Mac) Elliott Phone: 813 284 2736 MECHANICAL Valid To: August 31, 2018 Certificate

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 MNP CORPORATION TECHNICAL AND RESEARCH SERVICES 1 (Corporate Facility) 44225 Utica Road Utica, MI 48317 Chad Clifford Phone: 586 254 1320 MECHANICAL Valid To:

More information

Annex to the Accreditation Certificate D-PL according to ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-20658-01-00 according to ISO/IEC 17025:2005 Period of validity: 13.06.2018 to 12.06.2023 Holder of certificate: IMAT Shenyang

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ELECTRICAL

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ELECTRICAL SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 EMCCONS DR. RASEK GMBH & CO. KG 1 Moggast, Boelwiese 8 91320 Ebermannstadt, GERMANY Dr.-Ing. Andreas Abach (Primary Contact) Phone: + 49 9194 9016 Email: a.abach@emcc.de

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. ZF GLOBAL ELECTRONICS- VALIDATION LABORATORY Carl-Spaeter-Str. 8 Koblenz, Germany 56070

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. ZF GLOBAL ELECTRONICS- VALIDATION LABORATORY Carl-Spaeter-Str. 8 Koblenz, Germany 56070 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ZF GLOBAL ELECTRONICS- VALIDATION LABORATORY Carl-Spaeter-Str. 8 Koblenz, Germany 56070 Werner Dillbahner, Dipl.-Ing. (FH), (Authorized Representative) Phone:

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 DEKRA IST RELIABILITY SEVICES INC. No. 22 Puding Rd., East Dist. Hsinchu City 300, Taiwan, R.O.C. Phone: 886 3 579 5766 ext 7100 Mr. General Lee general.lee@dekra-ist.com

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 EMCCONS DR. RASEK GMBH & CO. KG 1 Boelwiese 8 91320 Ebermannstadt, GERMANY Dr.-Ing. Andreas Abach (Primary Contact) Phone: + 49 9194 7262-0 Email: a.abach@emcc.de

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 MGA RESEARCH CORPORATION 4 446 Executive Drive Troy, MI 48083 Helen Kaleto Phone: 248 577 5001 Email: helen.kaleto@mgaresearch.com Website: www.mgaresearch.com

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CONSUMER TESTING LABORATORIES, INC. 2601 SE Otis Corley Drive Bentonville, AR 72712 Stephanie Anderson Phone: 479 286 2376 MECHANICAL Valid To: September 30,

More information

Title: Performance Requirements of Exterior Painted Parts

Title: Performance Requirements of Exterior Painted Parts Title: Performance Requirements of Eterior Page: 1 of 10 A B C D INDEX A Inde B Scope C Object D Review E Related Documents F Standard Requirements for Production Materials G System Components and General

More information

Certificate of Accreditation

Certificate of Accreditation ISO/IEC 17025:2005 Certificate of Accreditation Certificate Number L2195 Exova, Inc. Anaheim 3883 East Eagle Drive Anaheim CA 92807 has met the requirements set forth in L-A-B s policies and procedures,

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ELEMENT MATERIALS TECHNOLOGY MINNEAPOLIS LLC (A subsidiary of Element Materials Technology Minneapolis Inc.) 9725 Girard Avenue South Minneapolis, MN 55431

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ZF GLOBAL ELECTRONICS CZESTOCHOWA ENGINEERING CENTER VALIDATION LABORATORY 1 Branch Laboratory ul. Pulaskiego 78 Czestochowa, Poland PL-42-200 Pawel Kantor,

More information

Green Polymeric Materials Inc.

Green Polymeric Materials Inc. Green Polymeric Materials Inc. Recycled Rubber Filled Soy Polyurethane Using Soy And Recycled Tire Rubber To Enhance Clean Automotive Technologies has been in business since 2002 GPMis a manufacturer of

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ELECTRICAL

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ELECTRICAL SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ELEMENT MATERIALS TECHNOLOGY DETROIT - WARREN 11 MILE 1 27485 George Merrelli Drive Warren, MI 48092 Scott Stephen Karrer Phone: 586 754 9000 ext. 32900 Email:

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ELITE ELECTRONIC ENGINEERING, INC. 1 1516 Centre Circle Downers Grove, IL 60515 Larry Brooks (QA Manager) Phone: 630 495 9770 ext. 166 Email: lbrooks@elitetest.com

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18869-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 30.08.2013 to 29.08.2018 Holder of certificate: ilf

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CONSUMER TESTING LABORATORIES, INC. 2601 SE Otis Corley Drive Bentonville, AR 72712 Chessie Koko Phone: 479 286 2300 MECHANICAL Valid To: September 30, 2018

More information

Cyclic Corrosion Test CORR Series

Cyclic Corrosion Test CORR Series Cyclic Corrosion Test CORR Series CCT 1300 CORR image merely illustrative Specifications/Model CCT 1300 CORR CCT 3000 CORR CCT 5000 CORR - Mode: SALT SPRAY / SALT FOG - Mode: WATER CONDENSATION HUMIDITY

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 BUREAU VERITAS CONSUMER PRODUCTS SERVICES MEXICO, S.A. DE C.V.-PUEBLA 1 Circuito del Sol 3905-01 Colonia Nuevo Amanecer Puebla, Puebla 72400, Mexico Alicia

More information

ACCELERATED CORROSION TEST CHAMBERS

ACCELERATED CORROSION TEST CHAMBERS ACCELERATED CORROSION TEST CHAMBERS SALT SPRAY CYCLIC ACCT CCT CASS IMMERSION TANK SATURATED HUMIDITY KESTERNICH-SO 2 UV PROHESION GRAVELOMETER www.equilamna.com SALT SPRAY Industries Served: : Paint,

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ELITE ELECTRONIC ENGINEERING, INC. 1 1516 Centre Circle Downers Grove, IL 60515 Stephen Laya (QA Manager) Phone: 630 495 9770 ext. 119 Email: sglaya@elitetest.com

More information

COMPOSITEs MATERIALS: TEST THEIR QUALITY WITH SGS

COMPOSITEs MATERIALS: TEST THEIR QUALITY WITH SGS COMPOSITEs MATERIALS: TEST THEIR QUALITY WITH SGS Composites are undergoing rapid development, especially in helping to make industrial parts lighter. In this context, SGS is offering its expertise to

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ELEMENT CLEVELAND 5405 East Schaaf Road Cleveland, OH 44131 Jeffry J Smith Phone: 216 524 1450 Jeffry.Smith@element.com MECHANICAL Valid To: October 31, 2018

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 METTLER TOLEDO (INDUSTRIAL) 1900 Polaris Parkway Columbus, OH 43240 Frank Gardone Phone: 412 213 2263 CALIBRATION Valid To: April 30,

More information

Cyclic Corrosion Chamber C.C.T AUTO Series

Cyclic Corrosion Chamber C.C.T AUTO Series Cyclic Corrosion Chamber C.C.T AUTO Series CCT 5000 AUTO image merely illustrative Cooling system image merely illustrative Specifications/ Models CCT 1300 AUTO CCT 3000 AUTO CCT 5000 AUTO Allows 7 different

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that has been assessed by ANAB and meets the requirements

More information

Re: Extension for ISO/IEC 17025: 2005 accreditation Certificates #ACT-1997, ACT , ACT & AT

Re: Extension for ISO/IEC 17025: 2005 accreditation Certificates #ACT-1997, ACT , ACT & AT October 17, 2017 VIA EMAIL Link Engineering Company Jim Villella 401 Southfield Road Dearborn, MI 48120 Re: Extension for ISO/IEC 17025: 2005 accreditation Certificates #ACT-1997, ACT-1997.01, ACT-1997.02

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 AUTOLIV ASP, INC. Autoliv North America 1320 Pacific Dr. Auburn Hills, MI 48326 Warren Short 248 276 3840 warren.short@autoliv.com MECHANICAL Valid To: April

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 METTLER TOLEDO (INDUSTRIAL) 1900 Polaris Parkway Columbus, OH 43240 Frank Gardone Phone: 412 213 2263 CALIBRATION Valid To: April 30,

More information

MITRAS MATERIALS GMBH

MITRAS MATERIALS GMBH MITRAS MATERIALS GMBH Friedrich-Ochs-Str. 2 92637 Weiden/Opf. Tel.: 0961 / 89-810 / 89-812 Fax: 0961 / 89-672 Directory of services L a b o r a t o r y MITRAS MATERIALS GMBH Edition 02/18 Rev. 08 page

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 YANFENG GLOBAL AUTOMOTIVE INTERIOR SYSTEMS CO., LTD. AUTOMOTIVE TRIM & ELECTRONICS TESTING LABORATORY. China Technical Center No. 1001 North Qinzhou Rd. Shanghai,

More information

Automotive Testing and Engineering Services

Automotive Testing and Engineering Services UL PERFORMANCE MATERIALS Automotive Testing and Engineering Services OEM Testing according to OEM Delivery Specifications performance materials for automotive applications Automotive Supplier Raw Materials

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCI-LAB MATERIALS TESTING INC. 150 Trillium Drive Kitchener, Ontario, CANADA, N2E 2C4 Richard Isaacs Phone: 519 895 0500 MECHANICAL Valid To: March 31, 2019

More information

Monarch #5032. Product W L T W L T

Monarch #5032. Product W L T W L T AUTOMOTIVE Monarch #5032 UL94 HF-1 listed for flame UL50E (periodic and continuous compression), UL508 and UL48 listed for gaskets and seals (recent upgrade) Widely used general purpose EPDM / CR / SBR

More information

DILLARD S TEST PROTOCOL FOR DILR US LUGGAGE (V26)

DILLARD S TEST PROTOCOL FOR DILR US LUGGAGE (V26) Test Date: Reviewed By/Date: SUPPLEMENTAL PROTOCOLS DILLARD S TEST PROTOCOL FOR 1 The sample shall be reviewed against the requirements of California Proposition 65 to determine if additional testing or

More information

Monarch #5031. Product W L T W L T

Monarch #5031. Product W L T W L T AUTOMOTIVE Monarch #5031 UL94 HF-1 listed for flame UL50E (periodic and continuous compression), UL508 and UL48 listed for gaskets and seals (recent upgrade) Widely used general purpose EPDM / CR / SBR

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17435-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 30.09.2016 to 08.12.2018 Holder of certificate: k3works

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17435-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 06.12.2017 to 08.12.2018 Holder of certificate: k3works

More information

Monarch. Monarch #5013. General Info

Monarch. Monarch #5013. General Info AUTOMOTIVE Monarch #5013 UL94 HF-1 and HBF listed for flame UL50E (periodic and continuous compression), UL508 and UL48 listed for gaskets and seals (recent upgrade) Widely used general purpose blend ASTM

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 TTL LABORATORIES - A DIVISION OF 41 Illinois Avenue Warwick, RI 02888-3007 Ben Miranda Phone: 401 562 1333 MECHANICAL Valid To: March 31, 2019 Certificate Number:

More information

Ensolite IR41. Chrysler Chrysler MSAY 516 Type 1 Exception to 25% compression deflection Meets at thicknesses of (1/8 ) (3.

Ensolite IR41. Chrysler Chrysler MSAY 516 Type 1 Exception to 25% compression deflection Meets at thicknesses of (1/8 ) (3. AUTOMOTIVE Ensolite IR41 94 HF-1 listed for flame 50E (periodic and continuous compression) listed for gaskets and seals (recent upgrade) Manufactured in a variety of thicknesses Widely used skin 2 sides

More information

Ensolite IV1. Formerly MILR6130-C

Ensolite IV1. Formerly MILR6130-C AUTOMOTIVE Ensolite IV1 UL 94 V-0, V-1, HF-1 and HBF listed for flame (periodic and continuous compression) listed for gaskets and seals (recent upgrade) ASTM D 1056-07 2A1 / 2C1 grade product ASTM D 6576-07

More information

MIRTA-KONTROL d.o.o. LABORATORY DEPARTMENT

MIRTA-KONTROL d.o.o. LABORATORY DEPARTMENT Textiles 1) Fibre composition - Qualitative analysis (Internal MK method) 2) Fibre composition - Binary fibre mixtures (EN ISO 1833-series) 3) Fibre composition - Ternary fibre mixtures (EN ISO 1833-2)

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-19722-01-00 according to DIN EN ISO/IEC 17025:2005 Holder of certificate: Institut für Lacke und Farben Magdeburg ggmbh Fichtestraße

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Energy Assurance, LLC 5202 Belle Wood Court,

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 & ANSI/NCSL Z540-1-1994 EUSTIS CO., INC./PYROCOM CALIBRATION LAB 12407-B Mukilteo Speedway Lynnwood, WA 98087 Bill LeMesurier Phone: 425 423 9996 CALIBRATION

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 MABAMEX S.A. DE C.V. Blvd. El Refugio #25551 Florido 1 Seccion Tijuana, Baja California, MEXICO C.P. 22237 Galia Frez Phone: 011 52 664 627 8055 MECHANICAL

More information

Labthink Instruments Co. Limited http://www.labthinktestinstruments.com/ We are engaged in manufacturing, supplying, and exporting a comprehensive gamut of Testing Equipment like Permeability Test, Tensile

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SOUTHWEST RESEARCH INSTITUTE Office of Automotive Engineering Fuels and Lubricants Research Division and the Engine, Emissions and Vehicle Research Division

More information

GDO-Galvanizadora de Occidente

GDO-Galvanizadora de Occidente GDO-Galvanizadora de Occidente PRESENTATION Specialized in Metal Plating and Plastic Plating. GDO counts with 3 facilities located in the Industrial Zone of Guadalajara, Mexico. GDO can also offer to Customers

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SOUTHWEST RESEARCH INSTITUTE Office of Automotive Engineering Fuels and Lubricants Research Division 6220 Culebra Road, P.O. Drawer 28510 San Antonio, TX 78228-0510

More information

Certificate of Accreditation

Certificate of Accreditation Certificate of Accreditation ISO/IEC 17025:2005 Certificate Number L2264.03 Analysts, Inc. 2450 Hassell Road Hoffman Estates IL 60195 has met the requirements set forth in L-A-B s policies and procedures,

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that SP Metrology System Thailand Co., LTD 88/115

More information