11 BS 4468 ; Withdrawn and replaced by BS En : 1994, ISO 1974 : 1990( 2012). Determination of tearing resistance ( Elmendorf method )
|
|
|
- Coleen Walton
- 5 years ago
- Views:
Transcription
1 S No Standrads Name 1 ASTM SEC 7 - Textiles 2 ASTM SEC 8 - Plastics 3 ASTM SEC 9 - Rubber 4 ASTM SEC 10 - Electrical Insulation and Electronics 5 ASTM SEC 4 VOL 04.04:2013 (construction: volume 04.04:Roofing and waterproofing ) 6 ASTM SEC 4 VOL 04.06:2013 (construction volume 4: Thermal insulation ; building and environmental) 7 ASTM SEC 4 VOL 04.07:2013 (construction volume 04.07: building seals and sealants; fire standards; dimension stone) 8 ISO : 2008 Geosynthetics - wide - width tensile test 9 DIN EN ISO : Geosynthesis - Static puncture test ( CBR test ) (ISO 12236:2006) German Version En ISO : DIN EN (ISO 9237:1995)12 Textile - Determination of permeability of fabrics to air (ISO 9237 : 1995); German Version En ISO 9237 : BS 4468 ; Withdrawn and replaced by BS En : 1994, ISO 1974 : 1990( 2012). Determination of tearing resistance ( Elmendorf method ) 12 ISO : 2000 Textile - Tear Properties of Fabric - part 1 : Determination of tear force using ballistic pendulum method (Elmendorf ) 13 ISO : 2000 Textile - Tear Properties of Fabric - part 2 : Determination of tear force of trouser - shaped test specimens (Single tear method ) 14 ISO : 2000 Textile - Tear Properties of Fabric - part 3 : Determination of tear force of wing shaped test specimens (Single tear method ) 15 ISO : 2000 Textile - Tear Properties of Fabric - part 4 : Determination of tear force of tongue - shaped test specimens (Single tear method ) 16 TAPPI T 414 OM - 12 Internal Tearing Resistance of paper (Elmendorf - type method ) 17 DIN EN ISO ; Textiles - Tear properties of fabrics - part 1 : Determination of tear force using ballistic pendulum method (Elmendorf) (ISO :2000);German version EN ISO
2 18 DIN EN ISO Rubber - or plastics - coated fabrics - Determination of tear resistance - part 1 : constant rate of tear methods ( ISO : 2003); German version EN ISO : ISO 1974 ; 2012 paper - Determination of tearing resistance - Elmendorf method 20 ISO ;1998 Acoustic - Determination of sound absorption coefficient and impedance in impedance Tube - part 2 : Transfer - function method 21 AS/NZS 4399 : 1996 sun protective clothing - Evaluation and classification 22 AATCC Transmittance or blocking of Erythemally weighted ultraviolet radiation through fabrics 23 DIN EN ISO 5084 ; Textile - Determination of thickness of textile and textile products (ISO 5084 ; 1996) ; German version EN ISO 5084 ; BS EN ISO ; 2005 BS EN ISO : 2005 Geosynthetics Determination of thickness at specified pressure single layers 25 BS EN ISO ; Textile - Test method for non wovens - part 2 : Determination of thickness (ISO ; 1995 ); German version EN ISO ; ISO 4920 ; 2012 Textile fabrics - Determination of resistance to surface wetting (spray test ) 27 AATCC water repellency spray test ( Reaffirmed -2010) 28 BS Replaced with BS EN ISO 4920:2012-Textile fabrics. Determination of resistance to surface wetting (Spray Test) 29 ISO 105-C 10; 2006 ISO C 10 : Textiles - Tests for colour fastness - part c 10 color fastness to washing with soap or soap and soda 30 AATCC colorfastness to laundering : Accelerated weathering 31 DIN : Determination of burning behavior of interior materials in motor vehicles 32 ISO 3795 : 1989 Road vehicles and tractors and machinery for agriculture and foresty - Determination of burning behaviour of interior materilas 33 DIN EN ISO 6941; Textile fabrics - Burning behaviour - Measurement of flame spread properties of vertically oriented specimens (ISO 6941:2003); German version ENISO 6941: DIN EN ISO : Protection against heat and flame - method of test for limited flame spread ( ISO 6904:2004);German version EN ISO 6940: DIN EN ISO 6940: Textile fabrics - Burning behaviour Determination of ease of ignition of vertically oriented specimens ( ISO 6940 : 2004) German Version EN ISO 6940: 2004
3 36 ISO : 2013 Plastic - methods of exposure to laboratory light sources - part 2 : Xenon - arc lamps 37 ISO : 2011 Leather - physical and mechanical tests - Determination of softness 38 ISO 8589 : 2007 Sensory analysis - General guidance for the design of test rooms 39 ISO : 2008 Geosynthetics - wide - width tensile test 40 ISO 12236:2006 Geosynthetics - static puncture test (CBR test ) 41 ISO 11058:2010 Geotextiles and geotextile - related product - Determination of water permeability characteristics normal to the plane without load 42 ISO : 2010 Geotextiles and geotextile - related product - Determination of the characteristic opening size 43 DIN EN ISO : Geosynthesis - wide - width tensile test ( ISO : 2008) ; German version EN ISO : DIN EN ISO : Geotextiles and geotextile - related product - Determination of water permeability characteristics normal to the plane without load ( ISO :2010 ); German version EN Iso : 2010 DIN EN ISO : Geotextiles and geotextile - related product - Determination of characteristics opening size ( ISO : 2010 ); German version EN ISO : DIN EN ISO : 2000 Textile - Tear Properties of Fabric - part 1 : Determination of tear force using ballistic pendulum method (Elmendrof ) 47 BS EN ISO , 1998 Rubber or plastic - coated fabrics.determination of tear force using ballistic pendulum method 48 DIN EN Textiles - solar UV protective properties -part 1 : method of test for apparel fabrics ; German version EN ;2001+A1; Global AATCC 183 Transmittance or blocking of Erythermal weighted ultraviolet radiation through fabrics 50 Global AATCC 61 colour fastness to laundering : Accelerated 51 Global SAA AS / NZS 4399 : 1996 Sun protection clothing - Evolution and classification 52 COC GB /T : 2009 Textile evolution for solar ultraviolet radiation protective properties 53 BS EN ISO 9237,1995 Textile Determination of the permeability of fabric to air
4 54 ASTM D Standard test method for surface and interfacial tension of solutions of surface - active agents 55 IS Method for determining the water repellency of fabrics by water spray test 56 BS 1006 has been withdrawn and replaced by BS EN ISO DO2,1996, Textiles.Test for colour fastness colour fastness to rubbing :Organic solvents 57 BS EN ISO BO3,1997, Textiles.Test for colour fastness colour fastness to weathering.outdoor exposure. 58 BS EN ISO BO4,1997, Textiles.Test for colour fastness colour fastness to artifical weathering.xenon arc fading lamp test 59 BS EN ISO X08: 1997, Textiles.Test for colour fastness colour fastness to degumming 60 BS EN ISO X13: 1997, Textiles.Test for colour fastness colour fastness of wool dyes to processes using chemical means for creasing,pleating. 61 BS EN ISO BO1: 1999, Textiles.Test for colour fastness colour fastness to light : Daylight 62 BS EN ISO EO5: 2010, Textiles.Test for colour fastness colour fastness to spotting. Acid. 63 BS EN ISO EO1: 2010, Textiles.Test for colour fastness colour fastness to 64 BS EN ISO CO6: 2010, Textiles.Test for colour fastness colour fastness to domestic and laundering. 65 BS EN ISO EO6: 2006, Textiles.Test for colour fastness colour fastness to spotting.alkali 66 BS EN ISO GO2: 1997, Textiles.Test for colour fastness colour fastness to burnt - gas fumes 67 IS Method for determination of flammability and flame resistance of textile fabric method B (45 o Flame Test ) 68 ASTM G Standard practice for operating xenon arc light apparatus for exposure of Non - metallic materials 69 SAE J 2212 Accelerated exposure of automotive interior trim components using a controlled Irradiance Air - cooled Xenon - Arc apparatus 70 SAE J 1960 : Cancelled and superseded by J DIN is superseded as DIN EN ISO B06 Textiles - test for colour fastness part BO6 : Colour fastness and ageing to artificial light at high temperature : Xenon arc fading lamp test
5 72 ASTM F Standard test method for measuring abrasion resistance of metallic thermal spray coatings by using the taber Abraser 73 ASTM D Standard test method for measuring mass per unit area of Geotextiles 74 ASTM D Standard test method for measuring the nominal thickness of geosynthetic 75 ASTM D Standard test method for Deterioration of geotextiles by exposure to light moisture and heat in a Xenon arc type apparatus 76 ASTM D4632 / D4632 M - 08 (2013)e1 Standard test method for grab breaking load and elongation of geotextiles 77 ASTM D 4833 / D4833 M - 07 (2013) e1 - Standard test method for index puncture resistance of geomembrances and related products 78 ASTM D Standard test method for trapezoid tearing strength of geotextiles 79 ASTM D A (2014) Standard test method for water permeability of geotextiles by permittivity 80 ASTM D Standard test method for Determining apparent opening size of a geotextile 81 ASTM D (2009) standard test method for accelerated tensile creep and creep - Rupture of Geosynthesic material based on time - temperature superposition using the stepped isothermal method 82 ASTM D (2012) Standard test method for evaluating the unconfined tension creep and creep rupture behaviour of Geosynthetics 83 ASTM D Standard test method for tensile properties of geotextile by the wide - width strip method 84 ASTM D (2009) - e1 Standard test method for the static puncture strength of geotextiles and geotextile - related product using a 50 -mm probe 85 DIN PT 1 (Manuscript) : 1992 Testing of textiles ; Electrostatic behaviour ; Determination of electrical resistance 86 DIN PT 4 (Manuscript) : 1984 Testing of textiles ; Electrostatic behaviour ; Determination of electrical resistance 87 DIN PT 5 (Manuscript) : 1985 Testing of textiles ; Electrostatic behaviour ; Determination of electrical resistance 88 AATCC : Water resistance : Hydrostatic pressure test 89 ASTM E : Test method for impedance and absorption of acoustical material using a tube,two microphones and a digital frequency analysis system
6 90 SAE J1756 : Determination of the fogging characteristics of interior automotive materials 91 ASTM D971-12: Test method for Inter facial tension of oil against water by the ring method 92 ASTM D : Test method for surface wettability of coatings, substrates and pigments by Advancing contact angle measurement. 93 ASTM D : Xenon arc exposures of paint and related coatings 94 ASTM C : Test method for Airflow resistance of acoustical materials 95 ASTM F : Test method for pore size characteristics of membrane filters by bubble point and mean flow pore test 96 ASTM F :Test method for Measuring abrasion resistance of metallic thermal spary coatings by using the taber abraser 97 ASTM D a : Test method for Abrasion resistance of Textile fabrics (Flexing and abrasion method) 98 ASTM D : Test method for Scrub resistance of wall paints 99 ASTM D : Test method for Washability properties of interior architectural coatings 100 ASTM E : Test method for measurement of normal incidence sound transmission of acoustical material;s based on the transfer matrix method 101 DIN : : Determination of the fogging characterisitics of trim materials in the interior of automobiles 102 ISO 105-A02 : Grey scale for assessing change in colour 103 ISO 105-A05 :Instrumental assesment of change in colour for determination of grey scale rating 104 ISO 105-B10: Artificial weathering exposure to filtered xenon arc radiation 105 ISO 105-B08: quality control of blue wool reference materials 1 to ISO 105-B08: quality control of blue wool reference materials 1 to 7 Ammendment ISO 105-C09: Colour fastness to domestic and commercial laundering
7 108 ISO 105-C09: Colour fastness to domestic and commercial laundering Ammendment ISO 105-C08 : Colour fastness to domestic and commercial laundering using non phosphate detergent 110 ISO 105-B02 :Colour fastness to artificial light : xenon arc fading lamp test 111 ISO 105-C06:Colour fastness to domestic and commercial laundering 112 ISO 105-B07:Colour fastness to light of textiles wetted with artificial perspiration 113 ISO 105-A04:Method for the instrumental assessment of the degree of staning of adjacent fabrics 114 ISO 105-A03 :1993 : Grey scale for assessing staining 115 ISO 105 -J03 : calculation of colour differences 116 ISO 105-F01:Specification for wool adjacent fabric 117 ISO 105-A01 :Test for colour fastness General principles of testing 118 ISO 105-C07: Colour fastness to wet scrubbing of pigment printed textiles 119 DIN EN Test methods for nonwovens 120 DIN EN ISO : Determination of stress strain characteristics in compression 121 DIN EN Test method for the determinatio of micro-scratch resistance 122 DIN EN Determination of the abrasion resistance of knitted footwear garments 123 BS EN 13520:2002 : Footwear test methods for uppers,lining and insocks abrasion resistnace 124 PrEN :2014 (E)- Eropean standard draft 125 ASTM E8 - Tension testing of metallic materials
8 126 ASTM D : Flextural properties of unreinforced and reinforced plastics and electrical insulation materials by four point bending 127 ASTM D : Flexible cellular materials -slab,bonded and molded urethane foams 128 IS 13362:1992 : Textiles Asbestos yarn specification 129 IS 16126:2013 : water proof tarpaulins made from woven polyester fabric -specification 130 ISO 16889:2008 : Thermal insulation -- Determination of steady-state thermal resistance and related properties -- Heat flow meter apparatus 131 ISO 17071:2006 :Leather -- Physical and mechanical tests -- Determination of fogging characteristics 132 ISO :2011:Leather -- Determination of abrasion resistance -- Part 2: Martindale ball plate method 133 ISO 6452:2007:Rubber- or plastics-coated fabrics -- Determination of fogging characteristics of trim materials in the interior of automobiles 134 ISO 8301:1991 : Thermal insulation -- Determination of steady-state thermal resistance and related properties -- Heat flow meter apparatus 135 ISO 8301:1991 : A1Thermal insulation -- Determination of steady-state thermal resistance and related properties -- Heat flow meter apparatus 136 ASTM D4434 : standard specification for PVC sheet roofing 137 ASTM D :Standard Test Method for Tensile Properties of Single Textile Fibers 138 ASTM D :Standard test Method for Flammability of Apparel Textiles 139 ASTM D :Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method) 140 ASTM D :standard test method for thickness of textile materials 141 ASTM D :Standard Test Method for testing Polymer Matrix Composite Material 142 ASTM D :Standard Test Method for testing Polymer Matrix Composite Material for testile test 143 ASTM D :Standard test method for transition temperatures and enthalpies of fusion and crystallization of polymers by differential scanning calorimetry
MIRTA-KONTROL d.o.o. LABORATORY DEPARTMENT
Textiles 1) Fibre composition - Qualitative analysis (Internal MK method) 2) Fibre composition - Binary fibre mixtures (EN ISO 1833-series) 3) Fibre composition - Ternary fibre mixtures (EN ISO 1833-2)
Ahmedabad Textile Industry s Research Association (ATIRA), P.O. Ambawadi Vistar, Ahmedabad, Gujarat
Last Amended on - Page 1 of 13 I. TEXTILE MATERIALS 1. Fibre Micronaire Length Length uniformity Strength Elongation% Short fibre % Colour Whiteness (Rd) Colour Yellowness (+b) Neps/g Neps size SCN/g SCN
Services Directory updated: January 2016
Kulmbacher Straße 76 95213 Münchberg Tel. 09281/409-8720 Fax 09281/409-8799 E-mail: pruefamt@hof-university.de Director: Prof. Oliver Lottes Services Directory updated: January 2016 A) Mechanical and Technological
President For the Accreditation Council Certificate Number Valid to August 31, 2008
A2LA has accredited THE AMERICAN ASSOCIATION FOR LABORATORY ACCREDITATION ACCREDITED LABORATORY PEARL LEATHER FINISHERS, INC. TESTING LABORATORY Johnstown, NY for technical competence in the field of Mechanical
MITRAS MATERIALS GMBH
MITRAS MATERIALS GMBH Friedrich-Ochs-Str. 2 92637 Weiden/Opf. Tel.: 0961 / 89-810 / 89-812 Fax: 0961 / 89-672 Directory of services L a b o r a t o r y MITRAS MATERIALS GMBH Edition 02/18 Rev. 08 page
STS Directory Accreditation number: STS 0228
International standard: ISO/IEC 17025:2005 Swiss standard: SN EN ISO/IEC 17025:2005 TESTEX AG Schweizer Textilprüfinstitut Gotthardstrasse 61 CH-8027 Zürich Head: Responsible for MS: Dr. Jean-Pierre Haug
AUTOMOTIVE TESTS. BMW AUTOMOTIVE Pile Yarn Thickness $ 25.00
AUTOMOTIVE TESTS BMW AUTOMOTIVE3.2.4.2 Pile Yarn Thickness $ 25.00 BMW 3.2.10 Imprint Behavior Without Foam Impression Depth @ 60 Minutes and 24 hours (DIN 54316/EN20 105 A02) $ 75.00 BMW 3.2.10.2 Tested
Name of Laboratory : SGS CAMBODIA LABORATORY Accreditation Number : Testing : 1076 A-C, Street 371, Sangkat Stung Meanchey, Khan Meanchey,
Name of Laboratory Contact Person : Mr. Sopheak Chea Phone : + 855 23 967 888 Fax : - Email : Sopheak.Chea@sgs.com 1 Textiles - Colour fastness to light : ISO 105-B02 : 2014 Xenon-Arc BS EN ISO 105-B02
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CONSUMER TESTING LABORATORIES, INC. 2601 SE Otis Corley Drive Bentonville, AR 72712 Stephanie Anderson Phone: 479 286 2376 MECHANICAL Valid To: September 30,
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 RELIABLE ANALYSIS SHANGHAI, INC. No. 10, 12A, 24 Lane 1365 Kang Qiao Road East Shanghai, People s Republic of China, 201319 Mr. Victor Wen Phone: 86 21 6818
Geomembrane Test Methods
Appendix 2 Geomembrane Test Methods AMERICAN SOCIETY FOR TESTING AND MATERIALS (arranged by number) ASTM D-5 ASTM D-36 ASTM D-256 ASTM D-412 ASTM D-413 ASTM D-471 ASTM D-570 ASTM D-638 ASTM D-696 ASTM
D-LAB Specifications. Your Partner for textile testing and quality assurance
D-LAB Specifications Your Partner for textile ing and quality assurance D-LAB is your neutral partner for reliable quality management and evaluation in all textile areas. Producers of home textiles, furnishing
Accreditation Scope of Consumer & Retail Services Laboratory, Karachi, Pakistan
All Textile MaterialsProduct F-0602 Issue : 100815 Testing Laboratory. Accreditation Scope of Consumer & Retail Services Laboratory, Karachi, Pakistan Permanent laboratory premises H- 33, Korangi Industrial
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CONSUMER TESTING LABORATORIES, INC. 2601 SE Otis Corley Drive Bentonville, AR 72712 Chessie Koko Phone: 479 286 2300 MECHANICAL Valid To: September 30, 2018
Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18869-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 30.08.2013 to 29.08.2018 Holder of certificate: ilf
TESTING SERVICES OFFERED BY ATIRA TEXTILE & CHEMICAL TEXTILE TESTING LABORATORIES
TESTING SERVICES OFFERED BY ATIRA TEXTILE & CHEMICAL TEXTILE TESTING LABORATORIES Ahmedabad Textile Industry s Research Association P.O. Ambawadi Vistar, Ahmedabad- 380 015 Phones : 91-79-26307921-7922-7923,
Accreditation No: LAB 007. SGS Consumer & Retail Services - Laboratory H-3/3, Sector 5, Korangi Industrial Area, Karachi 74900, Pakistan.
F-0602 Issue : 100815 Accreditation No: Awarded to SGS Consumer & Retail Services - Laboratory H-33, Sector 5, Korangi Industrial Area, Karachi 74900, Pakistan. The scope of accreditation is in accordance
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 YANFENG GLOBAL AUTOMOTIVE INTERIOR SYSTEMS CO. LTD. YFAI Center of Excellence Laboratory 921 East 32 nd Street Holland, MI 49423 Arnie Suigussaar Phone: 616
UL S EXPEDITED COMPLIANCE SERVICES APPAREL
APPAREL APPAREL (1 COLOR / 1SIZE) Tier 1 - Regulatory - All $150 $90 Flammability General Wearing Apparel 16 CFR 1610 Flammability - Vinyl 16 CFR 1611 Care Labeling 16 CFR 423, ASTM D 3136, ASTM D 5489
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. ACCULAB INC Railroad Drive El Paso, TX Vladimir Juarez Phone: MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ACCULAB INC. 9900 Railroad Drive El Paso, TX 79924 Vladimir Juarez Phone: 915 751 1000 MECHANICAL Valid To: June 30, 2016 Certificate Number: 2692.01 In recognition
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 LABORATORIO CENTRAL DE BADER DE MEXICO 1 Bader de Mexico Sigma 601, Parque Industrial Delta Leon, Guanajuato C.P. 37179 MEXICO Juanita Landin Phone: 52 477
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. AUTONEUM NORTH AMERICA, INC Haggerty Rd. Novi, MI Jian Pan Phone: MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 AUTONEUM NORTH AMERICA, INC. 29293 Haggerty Rd. Novi, MI 48331 Jian Pan Phone: 248 324 2264 MECHANICAL Valid To: October 31, 2017 Certificate Number: 1745.02
UL Quality Assurance Private Limited, A-12,Sector-34, Infocity Phase-1,Gurgaon; Haryana. Discipline Mechanical Testing Issue Date
Last Amended on - Page 1 of 22 I. TEXTILE MATERIALS 1. Textile- Fabric/Garment Tensile Strength Strip test BS EN ISO 13934-1: 2013 EN ISO 13934-1: 2013 ISO 13934-1: 2013 ASTM D5035 2011 AS 2001.2.3.1:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 AUTONEUM NORTH AMERICA, INC. 480 West 5 th Street Bloomsburg, PA 17815 Justine Danilowicz Phone: 570 316 6078 MECHANICAL Valid To: April 30, 2019 Certificate
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. ACCULAB INC Railroad Drive El Paso, TX Jose Gonzalez Phone: MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ACCULAB INC. 9900 Railroad Drive El Paso, TX 79924 Jose Gonzalez Phone: 915 751 1000 MECHANICAL Valid To: June 30, 2020 Certificate Number: 2692.01 In recognition
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 HP PELZER MATERIALS TESTING LABORATORY 1175 Crooks Road Troy, MI 48084 Renata Machnik Phone: 248 280 2500 x176 MECHANICAL Valid To: November 30, 2018 Certificate
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 GUILFORD PERFORMANCE TEXTILES KENANSVILLE 1754 NC 903 / Highway 11 North Kenansville, NC 28349 Teresa Carter Phone: 910 296 5314 MECHANICAL Valid To: May 31,
DOWNLOAD OR READ : EN ISO 105 B06 XNCQAY PDF EBOOK EPUB MOBI
DOWNLOAD OR READ : EN ISO 105 B06 XNCQAY PDF EBOOK EPUB MOBI Page 1 Page 2 en iso 105 b06 xncqay en iso 105 b06 pdf en iso 105 b06 xncqay en. Format Language; std 1 88: PDF std 2 88: Paper CHF 88; Buy
Specification Cloth, Fire Resistant, Softshell
Royal Canadian Mounted Police Gendarmerie royale du Canada Doc. no: G.S. 1045-373 Date: 2017-05-20 Specification Cloth, Fire Resistant, Softshell This document has 12 pages. This document was created in
NZWTA TEXTILE TESTING Price List Valid from 01 July 2017
NZWTA TEXTILE TESTING Price List Valid from 01 July 2017 Carpet Tests Test Method Minimum Sample Size ACCS Full Test Package (6 tests) 1 x 1.5 m, 6 tiles $734.00 Castor Chair Test ISO TR 4918, BS DIN EN
Automotive Testing and Engineering Services
UL PERFORMANCE MATERIALS Automotive Testing and Engineering Services OEM Testing according to OEM Delivery Specifications performance materials for automotive applications Automotive Supplier Raw Materials
Labthink Instruments Co. Limited http://www.labthinktestinstruments.com/ We are engaged in manufacturing, supplying, and exporting a comprehensive gamut of Testing Equipment like Permeability Test, Tensile
Laboratory Reliable Analytical Laboratories Private Limited, Reliable House, 125 Indian Corpn Complex, Mankoli, Bhivandi, Thane, Maharashtra
Last Amended on - Page 1 of 7 I. PLASTICS, RUBBER AND LEATHER 1. Container for Packing of Natural Mineral Water and Packaged Drinking Water (Cups, glasses, bottles & Jars) Design, Shape and dimension IS
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
(part of Smithers Rapra and Ltd) Packaging Technical Services Cleeve Road Leatherhead Surrey KT22 7RU Contact: Mr G Collis Tel: +44 (0)1372 802000 Fax: +44 (0)1372 802245 E-Mail: gcollis@smithers.com Website:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 GHESQUIERE PLASTIC TESTING, INC. 20450 Harper Avenue Harper Woods, MI 48225 Douglas Leggat Phone: 313 885 3535 Fax: 313 885 1771 E-mail: doug@gptesting.com
SGS India Private Limited, Consumer Testing Services-Laboratory, No. 134, 2 nd Floor, Sivashakthi Nagar, College Road, Tirupur, Tamil Nadu
Last Amended on 03.12.2015 Page 1 of 7 I. TEXTILE MATERIALS 1. Yarn) Linear Density SO-IN-CTS-C02-QU-001 (Version 3.2) ASTM D1907/D1907 M-12 ASTM D 1059: 2001 ISO 7211-5: 1984 BS ISO 7211-5: 1984 ISO 2060:
Sarnafil TS E. Polymeric membrane for roof waterproofing. Product Description
Roofing Product Data Sheet Edition 06.2013 Version no. 01 Sarnafil TS 77-18 E Polymeric membrane for roof waterproofing Product Description Sarnafil TS 77-18 E8 E (thickness 1.8 mm) is a Polyester reinforced,
DILLARD S TEST PROTOCOL FOR DILR US LUGGAGE (V26)
Test Date: Reviewed By/Date: SUPPLEMENTAL PROTOCOLS DILLARD S TEST PROTOCOL FOR 1 The sample shall be reviewed against the requirements of California Proposition 65 to determine if additional testing or
Tensile (Reinf. Geomembranes)
POLYMERIC GEOMEMBRANES Asperity Height ASTM D7466, GRI GM12 Thickness (PVC) ASTM D1593 Thickness (Smooth PE) ASTM D751, D5199, ISO9863-1 Thickness (Textured PE) ASTM D5994 Weight ASTM D751, ISO 9864 Composition
COMMERCIAL ITEM DESCRIPTION SEAT COVER CLOTH, POLYESTER OR NYLON, WATER-RESISTANT
[INCH-POUND] May 14, 1999 COMMERCIAL ITEM DESCRIPTION SEAT COVER CLOTH, POLYESTER OR NYLON, WATER-RESISTANT The General Services Administration has authorized the use of this commercial item description
Presentation of the draft Global Technical Regulation on Safety Belts
Informal Document N 18 (30th GRSP, 3-6 December 2001 Agenda item 1.3.4) November 28 th, 2001 Presentation of the draft Global Technical Regulation on Safety Belts The draft global technical regulation
ACCREDITED LABORATORY
A2LA has accredited THE AMERICAN ASSOCIATION FOR LABORATORY ACCREDITATION ACCREDITED LABORATORY AKRON RUBBER DEVELOPMENT LABORATORY, INC. Akron, OH for technical competence in the field of Mechanical Testing
Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18869-01-00 according to DIN EN ISO/IEC 17025:2005 Holder of certificate: ilf Forschungs- und Entwicklungsgesellschaft Lacke
DILLARD'S INC TEST PROTOCOL FOR DILL USA- (V22) HANDBAG (CHILDREN)
By/Date: Page 1 of 6 SCOPE: This protocol is applicable for testing of handbag for children. SUPPLEENTAY POTOCOL Note: Additional cost, sample size and TAT may be required if testing to 1 or more supplemental
RELIABLE ANALYSIS INC. Troy, MI for technical competence in the field of
A2LA has accredited RELIABLE ANALYSIS INC. Troy, MI for technical competence in the field of Mechanical Testing This laboratory is accredited in accordance with the recognized International ISO/IEC 17025:2005
Subject Index. Aspergillus niger, 251. STP1386-EB/Jul. 2000
STP1386-EB/Jul. 2000 Subject Index A AATCC Committee RA-106, 14 Abrasion effects, nonwoven liquid barrier properties, 282 Acetone, 377 Adhesion, 464 surface, 251 Adhesive coverage, microporous films, 87
--> Buy True-PDF --> Auto-delivered in 0~10 minutes. GB/T Translated English of Chinese Standard: GB/T3923.
Translated English of Chinese Standard: GB/T3923.2-2013 www.chinesestandard.net Sales@ChineseStandard.net NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA GB ICS 59.080.30 W 04 Replacing GB/T 3923.2-1998
Crastin PBT Thermoplastic polyester resins
Crastin PBT Thermoplastic polyester resins Product guide and properties Start with DuPont Engineering Polymers DuPont s registered trademark Crastin PBT Thermoplastic polyester resins Introduction CRASTIN
Accessories Performance Standards Manual. Version 1 24/12/
Accessories Performance Standards Manual Version 1 24/12/2010-1 - CONTENTS Page/s Introduction 3 QVC Preferred Laboratories 4-7 Restricted Substances 8 List of Restricted Substances 9 Azo Dye Self Certification
Grade A. Evo EV-19 EV-5 EV-4 EV-2 EV-18 EV-14 EV-10 EV-22 EV-20 EV-21 EV-1 EV-23 EV-24 EV-25. Discover more at inscapesolutions.
Grade A Evo EV-2 EV-4 EV-5 EV-9 EV-10 EV-11 EV-14 EV-18 EV-1 EV-19 EV-20 EV-21 EV-22 EV-23 EV-24 EV-25 Evo Application Fan Specifications Contents Weight Per Unit 100% polyester 300 g/m² Performance Colorfastness
Spaceloft Insulation TECHNICAL GUIDE
(Click below to jump to sections.) Contents Introduction 3 Non-Combustibility and Fire Performance 4 EN 13501-1 Reaction to Fire Classification (Bodycote, Warrington Fire) ASTM E 84 Surface Burning Characteristics
Data sheet InnoSolTEX (ORMTEX )
Test results: High Visibility Fabrics - Technical Textiles (protective clothing) LUMINEX, Klopman GmbH, Ratingen, Germany - 60 % cotton - 40 % polyester Antimicrobial activity: DIN EN ISO 20645:2004-100
Polymeric membrane for roof waterproofing. Uses Roof waterproofing membrane for exposed flat roofs: Loose laid and mechanically fastened
Roofing Product Data Sheet Edition 06.2013 Version no. 01 Sikaplan -20 G Polymeric membrane for roof waterproofing Product Description Sikaplan -20 G (thickness 2.0(- 5 % / + 10 %)mm) is a polyester reinforced
The Groz-Beckert central laboratory. Overview and service specifications
The Groz-Beckert central laboratory Overview and service specifications Material testing Determination of the chemical composition of inorganic materials Emission spectroscopy (Fe, Ni, Al, Cu basis) C,
SECTION 6 5 SERVICE PROCEDURES AND SPECIFICATIONS. Body
SERVICE PROCEDURES AND SPECIFICATIONS Body SECTION 6 5 Specifications........................................... 208 Protecting your vehicle from corrosion...................... 209 Washing and waxing.....................................
paint protection Nanolex Paint Sealant is exceptionally durable lasting over two years and eliminating the need for regular polishing or waxing.
Nanolex offers you real world protection for your car. With a range of specialised, high technology coatings you can now keep your car in showroom condition for years. Made in Germany these true nano-technology
MARV
Nonwoven Geotextile Property Table English Values PROPERTY TEST METHOD UNIT VALUE 311 351 401 451 501 601 701 801 1001 1201 1601 Grab Tensile Strength ASTM D-4632 lb MARV 80 95 115 120 150 160 180 205
This tester is designed for conducting tensile, compression, bending, shearing, bonding strength,
FOOTWEAR TESTING GT-K01 Universal Testing Machine (Dual Column) This tester is designed for conducting tensile, compression, bending, shearing, bonding strength, peeling, tearing and other tests for shoes,rubber,
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Charter Coating Service (2000) Ltd. Suite
Thrace-LINQ, Inc. GTF GTF GTF GTF GTF GTF GTF GTF 170SF 180SF/190SF S AASHTO AASHTO AASHTO AASHTO AASHTO AASHTO
Woven Polypropylene GTF GTF GTF GTF GTF GTF GTF GTF 170SF 180SF/190SF 200S 200 250 270 300 AASHTO AASHTO AASHTO AASHTO AASHTO AASHTO 90 125 / 101 150 / 180 200 250 270 315 (400) (556 / 449) (667 / 445)
Wolf Kunststoff ZEDEX ZX-530 A5D Polymer Alloy
Wolf Kunststoff ZEDEX ZX-530 A5D Polymer Alloy Category : Polymer, Thermoplastic Material Notes: Main Characteristics: Low Creep; Low moisture absorption; Flame retardant; Low impurity ions; Good machinability;
The IULTCS official methods of analysis for leather
The IULTCS official methods of analysis for leather The IULTCS, through the IULTCS Testing Commissions (IUC, IUF and IUP), provides help and protection for the leather tanning industry worldwide by developing
BS-40 BS-25 BS-27* BS-07* BS-10* BS-12* BS-22* BS-02* BS-15 BS-08 BS-39
COLOR OPTIONS Please Call For Availability SPECIALTY WHITE BLACK BROWN GREY CLEAR BS-02 BS-02-SD FEEL THE DIFFERENCE Of Our Soft Durometer Line *SD = Optional Soft Durometer Domestic Phone: 856-345-7650
SGS India Private Limited, Consumer Testing Services-Laboratory, No. 134, 2 nd Floor, Sivashakthi Nagar, College Road, Tirupur, Tamil Nadu
Last Amended on 03.12.2015 Page 1 of 13 I. TEXTILE & TEXTILE AUXILIARIES 1. Determination of ph of Aqueous Extract Determination of Formaldehyde Free and Hydrolysed (Water Extraction Method) Released Formaldehyde
SECTION 6 5 SERVICE PROCEDURES AND SPECIFICATIONS. Body
SECTION 6 5 SERVICE PROCEDURES AND SPECIFICATIONS Body Specifications 236 Protecting your vehicle from corrosion 237 Washing and waxing 238 Cleaning the interior 239 235 SPECIFICATIONS DIMENSIONS AND WEIGHT
GB/T Translated English of Chinese Standard: GB/T NATIONAL STANDARD OF
Translated English of Chinese Standard: GB/T3917.3-2009 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 59.080.30 W 04 GB/T 3917.3-2009 Replacing
MATERIAL DATA SHEET TECHLITE LIGHT GREY ACOUSTICAL FOAM
TECHLITE Light Grey Acoustical Foam is a light-grey, open-cell foam made of melamine resin. TECHLITE is manufactured in the form of untrimmed blocks with a thin outer skin. The standard dimensions of the
Second Correlating Revision No. 3 NFPA [ Section No ]
![Second Correlating Revision No. 3 NFPA [ Section No ]](/thumbs/76/73230477.jpg "Second Correlating Revision No. 3 NFPA [ Section No ]")
Second Correlating Revision No. 3 NFPA 1991 2015 [ Section No. 2.3.2 ] 2.3.2 ASTM Publications. American Society for Testing and Materials, 100 Barr Harbor Drive, West Conshohocken, PA 19428 2959. ASTM
Labthink Instruments Co. Limited www.labthinktestinstruments.com We are engaged in manufacturing, supplying, and exporting a comprehensive gamut of Testing Equipment like Permeability Test, Tensile Test,
Annex to the Accreditation Certificate D-PL according to ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17277-01-00 according to ISO/IEC 17025:2005 Period of validity: 07.06.2017 to 06.06.2022 Date of issue: 07.06.2017 Holder
Asian Test Equipment. Laboratory Solution by AN ISO 9001:2008 CERTIFIED COMPANY. Tensile Strength Tester. Indentation Hardness Tester
AN ISO 9001:2008 CERTIFIED COMPANY Tensile Strength Tester Indentation Hardness Tester Box Compression Tester Bursting Strength Tester Specific Gravity Balance Hot Air Oven Toxicity Tester Flexometer Melt
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. ACT TEST SERVICES 273 Industrial Drive Hillsdale, MI Kevin Wendt Phone: MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ACT TEST SERVICES 273 Industrial Drive Hillsdale, MI 49242 Kevin Wendt Phone: 517 439 1485 MECHANICAL Valid To: November 30, 2014 Certificate Number: 2745.01
OX2/231 i-oxtra OX2/230 i-oxtra VAC-V2 i-gastra 7100
Classic Series Product Name & Description Classic + Big Data Standards To Follow OX2/231 i-oxtra 7600 Oxygen Permeability Tester This tester utilizes the coulometric sensor method to test the oxygen transmission
BS EN 14465:2003 Test Report
Report Ref: LEHTX00601372 Date Received: BS EN 14465:2003 Test Report Buying Division: 20/10/2011 Date Issued: 24/10/2011 Company Name & ddress Contact Name FLMEPROOFING LIMITED UNITS 1 & 2 LYON INDUSTRIL
Installation Devices 4
Installation Devices 4 4.1 Tapes HelaTape Flex - Vinyl Electrical Tapes HelaTape Wrap - Vinyl Tapes HelaTape Shield - Conductive Tapes HelaTape Flex 15 - All Purpose Vinyl Insulating Tape HelaTape Flex
Faurecia Interior Systems India Pvt. Ltd., Test Laboratory, Plot No. T-187, Pimpri Industrial Area (B. G. Block), Bhosari, Pune, Maharashtra
Last Amended on - Page 1 of 5 I. AUTOMOTIVE COMPONENTS 1. Component Testing (Rubber & Plastic Products) a. (Plastics/Fabric/ Soiling & Cleanability Ford FLTM BN 112-08: 2010 Daimler DBL 5399: 2007 General
SECTION 6 CORROSION PREVENTION AND APPEARANCE CARE. Corrosion prevention and appearance care
CORROSION PREVENTION AND APPEARANCE CARE SECTION 6 Corrosion prevention and appearance care Protecting your Toyota from corrosion......................... 382 Washing and waxing your Toyota.............................
A Case Study: Review of Flammability Product Testing, the Similarities and Differences Ellen Roaldi Bureau Veritas Consumer Products Services
A Case Study: Review of Flammability Product Testing, the Similarities and Differences Ellen Roaldi Bureau Veritas Consumer Products Services September 22, 2016 Agenda Methods Analysis Applicability Requirements
Floating Cover Information
Floating Cover Information Lange Containment Systems, Inc. Phone: 303-446-8644 Fax: 303-446-8798 Email: LinerGeeks@LangeContainment.com Greetings, I would like to take this opportunity to introduce you
Certificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
Title: Performance Requirements of Exterior Painted Parts
Title: Performance Requirements of Eterior Page: 1 of 10 A B C D INDEX A Inde B Scope C Object D Review E Related Documents F Standard Requirements for Production Materials G System Components and General
About. The ARO Collection is an Interior Design HiP Performance Wonder award winner. filzfelt.com 1
ARO Plank 1 About ARO Plank is a wall system composed of modular planks that assemble to create standard patterns, yielding a continuous, acoustically absorptive architectural finish. ARO Plank 1 has two
Hari Shankar Singhania Elastomer & Tyre Research Institute, HASETRI, Plot No. 437, R&D Center, Hebbal Industrial Area, Mysuru, Karnataka
Page 1 of 11 CHEMICAL TESTING I. RUBBER AND RUBBER PRODUCTS 1. Polymer/ Elastomeric materials 2. Fillers Heat Loss of carbon black Ash content ASTM D5667 0.1-45 % ISO 247 Dirt Content ASTM D1278 0.1-10
All Prices listed are in US Dollars 35% Discount on lab list prices, if not listed in this document
APPAREL PRICE LIST ACCESSORIES PRICE LIST COSMETICS PRICE LIST SOCKS AND HOSIERY PRICE LIST JEWELRY PRICE LIST AT HOME - HOME TEXTILES PRICE LIST ADULT FOOTWEAR PRICE LIST CHILDREN FOOTWEAR PRICE LIST
Halogen Free, Flame-retardant Polyether based TPU
STANDARD COLORS CMX Cable Markers Halogen Free, Flame-retardant Polyether based TPU TECHNICAL DATA SHEET Revision Number. 1 Last Edited 11. marts 2019 OTHER COLORS MATERIAL halogen free, flame retarded
TECHNICAL SPECIFICATIONS
ROMPOX 1107 ESD coating Solvent free, electrically volume conductive, pigmented, 2 component epoxy resin system with formulated amine hardener acc. to DIN 61340 Areas of application: ROMPOX 1107 ESD coating
Page 1 of 16. LEAD TIME START END MES PW PT001J (Interior/Exterior Plastic Parts For Decoration)
MES PW PT001J (Interior/Exterior Plastic Parts For Decoration) Delloyd shall do the test 1. Rigidity To evaluate, from the viewpoint of appearance, both the rigidity of parts (1) Deflection shall meet
Laboratory Bureau Veritas Consumer Products Services Lanka (Pvt.) Ltd., No. 570, Galle Road, Katubedda, Moratuwa, Sri Lanka
Last Amended on - Page 1 of 14 I. TEXTILE & TEXTILE AUXILIARIES 1. Textiles- Fabric/Garment Colorfastness to Crocking AATCC 8: 2013 BS EN ISO 105-X12: 2002 AATCC 116: 2013 Colorfastness to Perspiration
CATALOGUE FOR COMPOSITE INSULATOR
CATALOGUE FOR COMPOSITE INSULATOR Contents 1 2 3 4 5 6 Company Brief & Product Introduction Technology Characteristics Quality Assurance Manufacturing Equipments Testing Equipments Product Introduction
PROVIDING ACCURATE DATA IN A TIMELY MANNER
PROVIDING ACCURATE DATA IN A TIMELY MANNER 248 Hughes Lane St. Charles MO 63301 Ph. (636) 949-5835 Fax (636) 723-5835 www.elteklabs.com MATERIAL PROPERTIES LAB TRACKING TESTS TEST METHOD UL 746-A Section
Geosynthetics Laboratory
Geosynthetics Laboratory n One of the most advanced testing facilities in the industry n World-class geosynthetics R & D Cutting edge STATE OF THE ART GEOSYNTHETICS LABORATORY The Geosynthetics industry
RAUWORKS SCREEN/PARTITION PRODUCT RANGE AND TECHNICAL INFORMATION. Construction Automotive Industry
RAUWORKS SCREEN/PARTITION PRODUCT RANGE AND TECHNICAL INFORMATION From 01.02.2015 Subject to technical modifications www.rehau.com Construction Automotive Industry PRODUCT RANGE The acoustically effective
Certificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
SCOPE OF ACCREDITATION
Standards Council of Canada 600-55 Metcalfe Street Ottawa, ON K1P 6L5 Canada Conseil canadien des normes 55, rue Metcalfe, bureau 600 Ottawa, ON K1P 6L5 Canada SCOPE OF ACCREDITATION GROUPE CTT INC. /
--> Buy True-PDF --> Auto-delivered in 0~10 minutes. GB/T Translated English of Chinese Standard: GB/T
Translated English of Chinese Standard: GB/T25978-2018 www.chinesestandard.net Buy True-PDF Auto-delivery. Sales@ChineseStandard.net ICS 43.020 NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA GB T
Antifreeze Resistant Fatigue Resistant Gasoline Resistance Automotive Under the Hood ASTM D 4066 PA012G30 ASTM D 6779 PA012G30
Vydyne R530H Nylon resins are general purpose polyamide, heat stabilized, hydrolysis resistant, 30% glass fiber reinforced resins. Available in natural and black. It is specifically designed to maximize
Discipline Chemical Testing Issue Date Certificate Number T-2217 Valid Until Last Amended on
Last Amended on 19.05.2014 Page 1 of 10 I. TEXTILES & RELATED PRODUCTS 1. Garment / Fabric C/F To Laundering Home & Commercial : Accelerated, Modified 2A Cold (27 0 C), 2A Warm (49 0 C) AATCC 61: 2013
About. filzfelt.com 1
Akustika 10 Wall About Akustika 10 Wall is a wall-mounted acoustic system available in customizable sizes in 63 colors with exposed edge or 33 colors with wrapped edge, Akustika Wall achieves up to a 0.75
Engineering Excellence STANDARDS. By Standard Body
Engineering Excellence STANDARDS By Standard Body 6th June 2017 2 TESTING INSTRUMENTS Standard Instrument Standard Instrument 16 CFR 1500.51-53 Tension Test AATCC 106 AATCC 107 AATCC 117 AATCC 133 AATCC
MAIN LAB CONDITIONED ROOM FLAMMABLES FTT SNAPRITE MMT SWEATING GUARDED HOT PLATE ROTAWASH AIRPERM ROTAPILL PILLING AND SNAGGING TESTER
1 -HEAD MARTINDALE UNIVERSAL TENSILE TESTER, K ST 1 1 1 1 1 1 0 M 1 -HEAD MARTINDALE UNIVERSAL TENSILE TESTER, K ST The innovative measures skin touch properties of textiles objectively and quantitatively.