Tensile (Reinf. Geomembranes)
|
|
|
- Deborah Clementine Hines
- 6 years ago
- Views:
Transcription
1 POLYMERIC GEOMEMBRANES Asperity Height ASTM D7466, GRI GM12 Thickness (PVC) ASTM D1593 Thickness (Smooth PE) ASTM D751, D5199, ISO Thickness (Textured PE) ASTM D5994 Weight ASTM D751, ISO 9864 Composition / General Properties Brittleness Temperature ASTM D746 Carbon Black Content ASTM D1603, D4218 Carbon Black Dispersion ASTM D5596, D3015, ISO Coefficient of Thermal Expansion ASTM D696 Dimensional Stability ASTM D1204 Extractable Content EPA 600/2-88/052-App.E Extraction ASTM D3421 Hardness ASTM D2240 Melt Index ASTM D1238, ISO 1133 Microscopic Analysis -- OIT ASTM D3895, EN728 HP-OIT ASTM D5885 PVC Plasticizers (Content, Molecular Weight) ASTM D2124 Volatile Loss ASTM D1203 Water Extraction ASTM D1239, D3083 Barrier Properties Water Vapor Transmission Rate ASTM F1249, E96 (B, BW) Water permeability EN Gas permeability ASTM D1434, ISO Oxygen Transmission Rate ASTM D3985 2% Secant Modulus ASTM D5323 Adhesion of Coating ASTM D751, D903 Flexural Strength (2 directions) ASTM D790 Grab Tensile (Reinforced Geomembranes) ASTM D751, D7004 Hydrostatic Resistance ASTM D751A Impact ASTM D746 Puncture ASTM D4833, FTMS101C/2065 Puncture, pyrzamidal EN Geomembrane Seams (PE) ASTM D6392, D4437, D6214, ASTM D3083, D4545 Geomembrane Seams (Tape) ASTM D7272 Geomembrane Seams (PVC) D882 mod., D7408 Geomembrane Seams (Reinforced) ASTM D751, D7747 (Strip) D7749 (Grab) Tear (unreinforced) ASTM D1004 Tear (Reinforced Geomembranes) ASTM D751, D5884 Tensile (Multiaxial) ASTM D5617, ISO Tensile (PE) ASTM D6693, ISO 527 Tensile (PVC) ASTM D882 Tensile (Reinf. Geomembranes) Tensile (Wide Width - 10 % / min) Tensile With Extensometer ASTM D751, D7003 (Strip), D7004 (Grab) ASTM D4885 ASTM D638 Chemical Compatibility ASTM D5747, D5322, EPA 9090 Hydrostatic Puncture / Truncated Cones ASTM D5514 Low Temperature Bend Test ASTM D2136, EN Resistance to leaching EN Oven Aging ASTM D5721 Microbiological Resistance / Soil Burial ASTM G160, D3083, EN Stress Cracking Resistance ASTM D5397, EN UV (Fluorescent) ASTM D7238, G154, GRI GM11, EN Guide for Selection of Rate of Fluid Permeation Through Geomembranes D5886 Guide for Flexible Polypropylene Geomembranes D6434 Guide for Mechanical Attachment to Penetrations or Structures D6497 Guide for EPDM Geomembranes D7106 Specification for PVC Geomembranes D7176 Specification for EPDM Geomembrane D7465 Specification for fpp-r and fpp Geomembranes D7613 Guide for Selecting Test Methods for Geomembrane Seams D7700 Practice for Electrical Leak Location - Water Lance System D7703 canals EN Characteristics / liquid waste disposal sites or transfer sites EN Tel.: +1 (450) Fax: +1 (450)
2 GEOSYNTHETIC CLAY LINERS (GCL) Thickness ASTM D5199, ISO Weight, Water Content, Bentonite Content ASTM D5993, ISO 9864 Weight (Geotextiles) ASTM D5261 Properties of the Mineral Fraction Swell Index ASTM D5890 Fluid Loss ASTM D5891 Water absorption of bentonite ISO GCL Tensile ASTM D6768, D4632 Wide Width Tensile properties ASTM D4595, ISO Peel Strength ASTM D6496, ASTM, D4632 mod. Puncture (50mm Probe) ASTM D6241, ISO Tensile Strength (Grab) ASTM D4632 Hydraulic Conductivity (Water) ASTM D5887, ASTM, D5084 Clay geosynthetic barriers -- Permeability to gases ISO Internal / Interface Shear Strength ASTM D6243, ISO Large Scale Hydrostatic Puncture ASTM D5514 Guidelines for the assessment of durability ASTM D5819, ISO/TS Chemical Compatibility (Mineral Fraction) ASTM D6141 Hydraulic Conductivity (With Contaminants) ASTM D6766 Chemical Compatibility SAGEOS GC001 Manufacturing Quality Control ASTM D5889 Acceptance testing of GCL ASTM D6495 canals EN Characteristics / liquid waste disposal sites or transfer sites EN BITUMINOUS GEOMEMBRANES Mass per Unit Area Thickness ASTM D5261, ASTM D3776, ISO 9864 ASTM D5199, ASTM D5147, ISO Wide Width Tensile ASTM D4595, ISO Tensile ASTM D7275, ISO 527, EN , NF-P Puncture Resistance ASTM D4833, ASTM, D6241, ISO Seams Shear Resistance ASTM D7056 Tear Resistance ASTM D4073, ASTM D1970 General Properties Coefficient of Thermal Expansion Low Temperature Flexibility Thermal Stability Water Absorption ASTM D696 ASTM D1970 ASTM D1970 ASTM D1970, ASTM D95 Dimensional Stability ASTM D1204 Hydrostatic Puncture / Truncated Cones ASTM D5514 Low Temperature Flexibility ASTM D5147. ASTM, D1970 Chemical Compatibility ASTM D5747, D5322, EPA 9090, EN Resistance to leaching EN Oven Aging ASTM D5721 Microbiological Resistance / Soil Burial ASTM G160, D3083, EN UV (Fluorescent) ASTM D7238, G154, EN UV (Xenon) ASTM D4798, G155, ISO 4892 Barrier Properties Water Vapor Transmission Rate ASTM F1249, ASTM E96 (B, BW) 4
3 Guide for Selection of Rate of Fluid Permeation Through Geomembranes D5886 Guide for Prefabricated Bituminous Geomembranes (PBGM) D6455 Specification for Bituminous Geomembrane (Canal and Ditch Liner) D2643 Characteristics / construction of canals EN Characteristics / liquid waste disposal sites or transfer sites EN GEOTEXTILES Thickness ASTM D5199, D1777, ISO , CAN/CGSB Thickness (Each Layer/Multilayered Products) ISO Thickness Under Load ISO , EN Weight ASTM D5261, D3776, ISO 9864, EN 965, CAN/CGSB Fibers / Microscopic Properties Carboxyl End Group GRI GG7 Crimp ASTM D3937 Fiber Analysis ASTM D276, CAN/CGSB 14.1 to Fiber Analysis (DSC) ASTM E793, E794, D3417, D3418 Fiber Length ASTM D5103 Fibers Breaking Strength ASTM D3822 Microscopic Analysis (SEM, Optic) -- Abrasion ASTM D4886, ISO Burst (Ball) ASTM D3787, CAN/CGSB Burst (Mullen) ASTM D3786, CAN/CGSB Hydrostatic Resistance ASTM D751A, EN Puncture ASTM D4833, FTMS 101C/2065 Puncture (50 mm Probe / CBR Test ) ASTM D6241, ISO Puncture (Dynamic / cone drop) ISO 13433, EN 918 Pyramid Puncture ASTM D5495, NF G Sewn Seam Strength ASTM D4884, ISO Stiffness ASTM D1388, D5732, CAN/CGSB Tear ASTM D4533, D1117, CAN/CGSB Tensile (Grab) ASTM D4632, D5034, CAN/CGSB Tensile (Strip) ASTM D5035 Wide Width Tensile ASTM D4595, ISO Opening Size (AOS) ASTM D4751 Opening Size (Bubble Point) ASTM F316, SAGEOS GX005 Opening Size (FOS) NFG 38017, CAN/CGSB Opening Size (Wet Sieving) ISO Number of Constrictions ASTM D7178 Percent Open Area (POA) COE CW Permeability ASTM D4491, ISO 11058, NFG 38016, CAN/CGSB Permittivity Under Load ASTM D5493, ISO Resistance to Water Penetration ISO 811, CAN/CGSB Transmissivity (Radial) ASTM D6574 Transmissivity ISO Water Retention Capacity SAGEOS GX010 Behavior / Water Supply by Capillarity SAGEOS GX011 Capillarity SAGEOS GX012 Water Front Speed (Capillary Mats) SAGEOS GX013 Asphalt Retention ASTM D6140 Biological Clogging Resistance ASTM D1987 Chemical Compatibility ASTM D6389, D5322, ISO Gradient Ratio ASTM D5101, SAGEOS, GX006 Hydraulic Conductivity Ratio (Filtration) ASTM D5567 Hydrostatic Puncture (Large Scale) ASTM D5514 Installation Damage ASTM D5818, ISO 10722, EN Outdoor Exposure ASTM D5970 Silt Fence Efficiency ASTM D5141 Flow Rate of Water and Suspended Solids from a Geotextile Bag ASTM D7701 UV (Fluorescent) ASTM G154, EN Tel.: +1 Tel.: +1 (450) Fax: +1 (450)
4 Specification for Circular-Knit Geotextile ASTM D6707 Hybrid Geosynthetic Paving Mat Specification ASTM D7239 Characteristics required for use in earthworks, foundations and retaining structures EN13251 Resistance to acid and alkaline liquids ISO 12960, EN14030 Characteristics required for use in liquid waste containment projects EN GEONETS AND DRAINAGE PRODUCTS Carbon Black Content ASTM D1603, ASTM, D4218 Melt Index ASTM D1238 Thickness ASTM D5199, D1777, ISO Thickness / Individual layers of multilayered products ISO Mass per unit area ASTM D5261, D3776, ISO 9864 Compression ASTM D6364, D1621, ISO Peel Strength ASTM D7005, F904, D413, ISO Tensile ASTM D7179, D5035 WW Tensile ASTM D4595, ISO Vertical Compression of Geocomposite Pavement Panel Drains ASTM D6244 Static puncture test (CBR test) ISO Transmissivity ASTM D4716, ISO Vertical Strip Drains in the Crimped Condition ASTM D6918 Accelerated compressive creep properties ISO , ASTM D7361 Chemical Compatibility ASTM D6388, D5322, ISO/TR (direct shear), (inclined plane) UV (Fluorescent) ASTM G154, EN Vertical Strip Drains testing / Large Scale Consolidation Test ASTM D7498 Soil burial ISO Prefabricated Vertical Drains (PVD) Guide ASTM D6917 Edge Drains Specification ASTM D7001 Acceptance Testing of Geonets and Drainage Geocomposites ASTM D7273 Design guidances for PVDs EN GEOGRIDS Dimensions -- Thickness ASTM D5947, D5199, D1777, ISO Mass per unit area ASTM D5261, ISO 9864 Wide Width Tensile Properties ASTM D4595, D6637(B), ISO Tensile Strength (Single Rib) ASTM D6637(A), GRI GG1 Junction Strength ASTM D7737, GRI GG2 Flexural Stiffness ASTM D1388, D5732 Flexural Rigidity ASTM D7748 Torsional Stiffness / Aperture Stability ASTM WK24635 (draft) Carboxyl End Group GRI GG7, ASTM D7409 Chemical Compatibility ASTM D5322, D6213, ISO/TR Soil burial ISO Resistance to hydrolysis EN Concrete Blocks Shear Strength ASTM D6916 Connection Strength ASTM D6638 Creep Properties ASTM D5262, ISO Accelerated Creep ASTM D6992 Installation Damage ASTM D5818, ISO Installation Damage (index) ISO Intrinsic Viscosity / Molecular Weight (PET) ASTM D4603 Pull-Out Resistance ASTM D6706, GRI GG5 Small-Strain Tensile Properties / In-Air Cyclic Tension Tests ASTM D7556 Design Guidances Guidelines for the assessment of durability ASTM D5819, ISO/TS Long-term strength of geosynthetics for soil reinforcement ISO/TR
5 EROSION CONTROL PRODUCTS Absorbency Light Penetration Mass Resiliency Stiffness Thickness Compression Tensile ASTM D1117 ASTM D6567 ASTM D6475, D6566 ASTM D6524 ASTM D6575 ASTM D6525 ASTM D6454 ASTM D6818 SYNTHETIC TURFS, SPORT SURFACES Abrasiveness Apparent Component Masses Linear Number of Binding Sites Pile Thickness Pile Yarn Mass Total Mass Tuft Height ASTM F1015 ASTM D1895 (B) ASTM D1577 ASTM D418, D5793 ASTM D418 ASTM D418, D5823 Compression Set ASTM D1667 (suffix B) Seam Resistance ASTM D4884, EN Tear Resistance ASTM D624 Tensile (Elastomeric Material) NF EN Tensile (Grab) ASTM D1682, D5034 Tensile (Tuft / Yarn) ASTM D2256, ISO 4919 Tuft Bind Resistance ASTM D1335 Water Permeability ASTM D4491, F1551, DIN RESEARCH AND FORENSIC ANALYSIS Fingerprinting Equipments (selected) - DSC Differential Scanning Calorimetry, with Cooling Unit - TGA Thermogravimetric Analysis - HPLC/GC-MS (High Performance Liquid Chromatography / Gas Chromatography, Coupled with a Mass Spectrometer) - FTIR-ATR Infrared Spectrophotometer with Attenuated Total Reflectance - Spectrophotometer UV Near Infrared - Ionic Chromatograph - ICP (Inductive Coupled Plasma) - Thermal Conductivity Analyser - Electronic Microscopy (partnership) Performance testing - Dynamometer with Environmental Chamber (-70 C to +250 C) - Several Impact Resistance Tests (Izod, Gardner, Dart ) - Thermal Infrared Camera Fire resistance laboratory Fire Resistance Evaluations: Accredited by Transport Canada - Radiant Panel (ASTM E162) - Vertical Flame Test (Federal Aviation Regulation) - Smoke (ASTM E662) - Flooring Radiant Panel Test (ASTM E648) - Several other index test (Flame Spread etc.) Manufacturing and small scale production units - Non-Woven (Needle-Punched) with several finishing options - 3D Weaving - Plasma Treatment - Narrow Weaving Machine equipped with Jacquard Head - Flat Knitting Machine - E-embroidery Machine - Warp Knitting Machine Thermal Properties DSC Analysis Melting point Fire Resistance Properties Flammability Tests ASTM E794 ASTM D789 ASTM D2859, E648, D4804 SAGEOS is a division of the CTT Group, a non-for-profit technology transfer center specialized in technical textiles, geosynthetics and flexible advanced materials. The CTT Group employs 60 professionals. Ph.D. and M Sc. A. scientists and researchers specializing in Chemistry, Civil Engineering / Geotechnical, Materials / Physics, Mechanical / Composites, Plastics / Polymers, Textiles. Engineers with backgrounds in: Textiles, Mechanical, Electrical, Civil, Geotechnical, Electronic, Plastics (polymers), Microbiology. Technicians holding technical degrees in civil, textile, plastic, pharmaceutical and other related fields. Tel.: +1 Tel.: +1 (450) Fax: +1 (450)
Geosynthetics Laboratory
Geosynthetics Laboratory n One of the most advanced testing facilities in the industry n World-class geosynthetics R & D Cutting edge STATE OF THE ART GEOSYNTHETICS LABORATORY The Geosynthetics industry
Geomembrane Test Methods
Appendix 2 Geomembrane Test Methods AMERICAN SOCIETY FOR TESTING AND MATERIALS (arranged by number) ASTM D-5 ASTM D-36 ASTM D-256 ASTM D-412 ASTM D-413 ASTM D-471 ASTM D-570 ASTM D-638 ASTM D-696 ASTM
Thrace-LINQ, Inc. GTF GTF GTF GTF GTF GTF GTF GTF 170SF 180SF/190SF S AASHTO AASHTO AASHTO AASHTO AASHTO AASHTO
Woven Polypropylene GTF GTF GTF GTF GTF GTF GTF GTF 170SF 180SF/190SF 200S 200 250 270 300 AASHTO AASHTO AASHTO AASHTO AASHTO AASHTO 90 125 / 101 150 / 180 200 250 270 315 (400) (556 / 449) (667 / 445)
ACCREDITED LABORATORY
A2LA has accredited THE AMERICAN ASSOCIATION FOR LABORATORY ACCREDITATION ACCREDITED LABORATORY AKRON RUBBER DEVELOPMENT LABORATORY, INC. Akron, OH for technical competence in the field of Mechanical Testing
MITRAS MATERIALS GMBH
MITRAS MATERIALS GMBH Friedrich-Ochs-Str. 2 92637 Weiden/Opf. Tel.: 0961 / 89-810 / 89-812 Fax: 0961 / 89-672 Directory of services L a b o r a t o r y MITRAS MATERIALS GMBH Edition 02/18 Rev. 08 page
The Groz-Beckert central laboratory. Overview and service specifications
The Groz-Beckert central laboratory Overview and service specifications Material testing Determination of the chemical composition of inorganic materials Emission spectroscopy (Fe, Ni, Al, Cu basis) C,
Ahmedabad Textile Industry s Research Association (ATIRA), P.O. Ambawadi Vistar, Ahmedabad, Gujarat
Last Amended on - Page 1 of 13 I. TEXTILE MATERIALS 1. Fibre Micronaire Length Length uniformity Strength Elongation% Short fibre % Colour Whiteness (Rd) Colour Yellowness (+b) Neps/g Neps size SCN/g SCN
11 BS 4468 ; Withdrawn and replaced by BS En : 1994, ISO 1974 : 1990( 2012). Determination of tearing resistance ( Elmendorf method )
S No Standrads Name 1 ASTM SEC 7 - Textiles 2 ASTM SEC 8 - Plastics 3 ASTM SEC 9 - Rubber 4 ASTM SEC 10 - Electrical Insulation and Electronics 5 ASTM SEC 4 VOL 04.04:2013 (construction: volume 04.04:Roofing
MIRTA-KONTROL d.o.o. LABORATORY DEPARTMENT
Textiles 1) Fibre composition - Qualitative analysis (Internal MK method) 2) Fibre composition - Binary fibre mixtures (EN ISO 1833-series) 3) Fibre composition - Ternary fibre mixtures (EN ISO 1833-2)
MARV
Nonwoven Geotextile Property Table English Values PROPERTY TEST METHOD UNIT VALUE 311 351 401 451 501 601 701 801 1001 1201 1601 Grab Tensile Strength ASTM D-4632 lb MARV 80 95 115 120 150 160 180 205
Labthink Instruments Co. Limited http://www.labthinktestinstruments.com/ We are engaged in manufacturing, supplying, and exporting a comprehensive gamut of Testing Equipment like Permeability Test, Tensile
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SOUTHWEST RESEARCH INSTITUTE Office of Automotive Engineering Fuels and Lubricants Research Division 6220 Culebra Road, P.O. Drawer 28510 San Antonio, TX 78228-0510
Crastin PBT Thermoplastic polyester resins
Crastin PBT Thermoplastic polyester resins Product guide and properties Start with DuPont Engineering Polymers DuPont s registered trademark Crastin PBT Thermoplastic polyester resins Introduction CRASTIN
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
(part of Smithers Rapra and Ltd) Packaging Technical Services Cleeve Road Leatherhead Surrey KT22 7RU Contact: Mr G Collis Tel: +44 (0)1372 802000 Fax: +44 (0)1372 802245 E-Mail: gcollis@smithers.com Website:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SOUTHWEST RESEARCH INSTITUTE Office of Automotive Engineering Fuels and Lubricants Research Division 6220 Culebra Road, P.O. Drawer 28510 San Antonio, TX 78228-0510
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CONSUMER TESTING LABORATORIES, INC. 2601 SE Otis Corley Drive Bentonville, AR 72712 Stephanie Anderson Phone: 479 286 2376 MECHANICAL Valid To: September 30,
Services Directory updated: January 2016
Kulmbacher Straße 76 95213 Münchberg Tel. 09281/409-8720 Fax 09281/409-8799 E-mail: pruefamt@hof-university.de Director: Prof. Oliver Lottes Services Directory updated: January 2016 A) Mechanical and Technological
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CONSUMER TESTING LABORATORIES, INC. 2601 SE Otis Corley Drive Bentonville, AR 72712 Chessie Koko Phone: 479 286 2300 MECHANICAL Valid To: September 30, 2018
AUTOMOTIVE TESTS. BMW AUTOMOTIVE Pile Yarn Thickness $ 25.00
AUTOMOTIVE TESTS BMW AUTOMOTIVE3.2.4.2 Pile Yarn Thickness $ 25.00 BMW 3.2.10 Imprint Behavior Without Foam Impression Depth @ 60 Minutes and 24 hours (DIN 54316/EN20 105 A02) $ 75.00 BMW 3.2.10.2 Tested
Liquid Filtration Experience and Capabilities
Liquid Filtration Experience and Capabilities Donaldson understands the need for new and unique liquid filtration technologies and solutions. We have a global infrastructure and technical expertise to
Covering the world. Protecting the Earth.
Covering the world. Protecting the Earth. SOLMAX.COM CANADA - MALAYSIA - CHILE - USA - CHINA - SOUTH AFRICA - FRANCE - INDIA At Solmax, we understand that a flexible and weathering resistant geomembrane
Hari Shankar Singhania Elastomer & Tyre Research Institute, HASETRI, Plot No. 437, R&D Center, Hebbal Industrial Area, Mysuru, Karnataka
Page 1 of 11 CHEMICAL TESTING I. RUBBER AND RUBBER PRODUCTS 1. Polymer/ Elastomeric materials 2. Fillers Heat Loss of carbon black Ash content ASTM D5667 0.1-45 % ISO 247 Dirt Content ASTM D1278 0.1-10
SCOPE OF ACCREDITATION
Standards Council of Canada 600-55 Metcalfe Street Ottawa, ON K1P 6L5 Canada Conseil canadien des normes 55, rue Metcalfe, bureau 600 Ottawa, ON K1P 6L5 Canada SCOPE OF ACCREDITATION GROUPE CTT INC. /
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 RELIABLE ANALYSIS SHANGHAI, INC. No. 10, 12A, 24 Lane 1365 Kang Qiao Road East Shanghai, People s Republic of China, 201319 Mr. Victor Wen Phone: 86 21 6818
Floating Cover Information
Floating Cover Information Lange Containment Systems, Inc. Phone: 303-446-8644 Fax: 303-446-8798 Email: LinerGeeks@LangeContainment.com Greetings, I would like to take this opportunity to introduce you
Geoscience Testing laboratory (Al Ain)
Soil 1 In-situ Density by Sand Replacement Method Using Large Pouring Cylinder & Small Pouring Cylinder In-place Density Test by Sand Cone Method BS 1 Part ASTM D 1556 Dry Density Moisture Content Relationship
Labthink Instruments Co. Limited www.labthinktestinstruments.com We are engaged in manufacturing, supplying, and exporting a comprehensive gamut of Testing Equipment like Permeability Test, Tensile Test,
PE-HDXc pipes (physically cross-linked polyethylene pipes)
pipes (physically cross-linked polyethylene pipes) Applications: Domestic drinking water installations, radiator connections and surface regulation Special properties high chemical resistance (according
Certificate of Accreditation
ISO/IEC 17025:2005 Certificate of Accreditation Certificate Number L2195 Exova, Inc. Anaheim 3883 East Eagle Drive Anaheim CA 92807 has met the requirements set forth in L-A-B s policies and procedures,
SCOPE OF ACCREDITATION
Standards Council of Canada 600-55 Metcalfe Street Ottawa, ON K1P 6L5 Canada Conseil canadien des normes 55, rue Metcalfe, bureau 600 Ottawa, ON K1P 6L5 Canada SCOPE OF ACCREDITATION GROUPE CTT INC. /
SCOPE OF ACCREDITATION TO ISO/IEC 17043:2010. ASTM INTERNATIONAL 100 Barr Harbor Drive West Conshohocken, PA Amy Meacock
SCOPE OF ACCREDITATION TO ISO/IEC 17043:2010 ASTM INTERNATIONAL 100 Barr Harbor Drive West Conshohocken, PA 19428 Amy Meacock 610 832 9688 PROFICIENCY TESTING PROVIDER Valid To: May 31, 2021 Certificate
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Charter Coating Service (2000) Ltd. Suite
President For the Accreditation Council Certificate Number Valid to August 31, 2008
A2LA has accredited THE AMERICAN ASSOCIATION FOR LABORATORY ACCREDITATION ACCREDITED LABORATORY PEARL LEATHER FINISHERS, INC. TESTING LABORATORY Johnstown, NY for technical competence in the field of Mechanical
Wolf Kunststoff ZEDEX ZX-530 A5D Polymer Alloy
Wolf Kunststoff ZEDEX ZX-530 A5D Polymer Alloy Category : Polymer, Thermoplastic Material Notes: Main Characteristics: Low Creep; Low moisture absorption; Flame retardant; Low impurity ions; Good machinability;
RELIABLE ANALYSIS INC. Troy, MI for technical competence in the field of
A2LA has accredited RELIABLE ANALYSIS INC. Troy, MI for technical competence in the field of Mechanical Testing This laboratory is accredited in accordance with the recognized International ISO/IEC 17025:2005
MANUFACTURING QUALITY CONTROL GEOMEMBRANES AND DRAINAGE PRODUCTS
MANUFACTURING QUALITY CONTROL GEOMEMBRANES AND DRAINAGE PRODUCTS AGRU AMERICA, INC. 500 Garrison Road Georgetown, SC 29440 Toll Free: (800) 373-2478 Telephone: (843) 546-0600 Fax: (843) 527-2738 salesmkg@agruamerica.com
LIST OF PUBLISHED STANDARDS
Report : 08-0-6 Page o : Of 5 LST OF PUBLSHED STDRDS Total Count: 78 umber SS umber pproved mendment SBS/TC 066 SS 97:07 7.0 Electric cables - mpregnated paper-insulated 07-0-7 metal-sheathed cables for
TECHNICAL DATA SHEET. Solmax HDPE Premium Smooth - Metric Values SPECIFICATIONS PROPERTY TEST FREQUENCY (1) UNIT. Solmax.
HDPE Premium Smooth - Metric Values International Inc., 2801 Boul. Marie-Victorin, Varennes, Qc, Canada, J3X 1P7 440-3100 460-3100 480-3100 500-3100 SPECIFICATIONS Thickness (min. avg.) ASTM D-5199 Thickness
OX2/231 i-oxtra OX2/230 i-oxtra VAC-V2 i-gastra 7100
Classic Series Product Name & Description Classic + Big Data Standards To Follow OX2/231 i-oxtra 7600 Oxygen Permeability Tester This tester utilizes the coulometric sensor method to test the oxygen transmission
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. ACCULAB INC Railroad Drive El Paso, TX Vladimir Juarez Phone: MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ACCULAB INC. 9900 Railroad Drive El Paso, TX 79924 Vladimir Juarez Phone: 915 751 1000 MECHANICAL Valid To: June 30, 2016 Certificate Number: 2692.01 In recognition
Accreditation Scope of Consumer & Retail Services Laboratory, Karachi, Pakistan
All Textile MaterialsProduct F-0602 Issue : 100815 Testing Laboratory. Accreditation Scope of Consumer & Retail Services Laboratory, Karachi, Pakistan Permanent laboratory premises H- 33, Korangi Industrial
Name of Laboratory : SGS CAMBODIA LABORATORY Accreditation Number : Testing : 1076 A-C, Street 371, Sangkat Stung Meanchey, Khan Meanchey,
Name of Laboratory Contact Person : Mr. Sopheak Chea Phone : + 855 23 967 888 Fax : - Email : Sopheak.Chea@sgs.com 1 Textiles - Colour fastness to light : ISO 105-B02 : 2014 Xenon-Arc BS EN ISO 105-B02
Subject Index. Aspergillus niger, 251. STP1386-EB/Jul. 2000
STP1386-EB/Jul. 2000 Subject Index A AATCC Committee RA-106, 14 Abrasion effects, nonwoven liquid barrier properties, 282 Acetone, 377 Adhesion, 464 surface, 251 Adhesive coverage, microporous films, 87
Sarnafil TS E. Polymeric membrane for roof waterproofing. Product Description
Roofing Product Data Sheet Edition 06.2013 Version no. 01 Sarnafil TS 77-18 E Polymeric membrane for roof waterproofing Product Description Sarnafil TS 77-18 E8 E (thickness 1.8 mm) is a Polyester reinforced,
Accreditation No: LAB 007. SGS Consumer & Retail Services - Laboratory H-3/3, Sector 5, Korangi Industrial Area, Karachi 74900, Pakistan.
F-0602 Issue : 100815 Accreditation No: Awarded to SGS Consumer & Retail Services - Laboratory H-33, Sector 5, Korangi Industrial Area, Karachi 74900, Pakistan. The scope of accreditation is in accordance
Antifreeze Resistant Fatigue Resistant Gasoline Resistance Automotive Under the Hood ASTM D 4066 PA012G30 ASTM D 6779 PA012G30
Vydyne R530H Nylon resins are general purpose polyamide, heat stabilized, hydrolysis resistant, 30% glass fiber reinforced resins. Available in natural and black. It is specifically designed to maximize
FILL-ON-SITE FOR REMOTE LOCATION PROJECTS
ECOBAG Geotextile Pipeline Weight (GPW) ECOBAG GPW is an easy-to-install, high-strength, free-standing pipeline set on weight that provides predictable performance in a variety of installation environments.
Polyamide 6 for Injection Moulding
Polyamide 6 for Injection Moulding Promyde is a trademark of NUREL 1 NUREL Engineering Polymers Excellence in Polymerization Recent technical advancements in NUREL polymerization processes have enabled
Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion
IAS Accreditation Number Company Name Address Contact Name Telephone +966-14-398-2118 Effective Date of Scope May 1, 2018 Accreditation Standard ISO/IEC 17025:2017 TL-743 Yanbu Industrial Area Yanbu, Madina
PROPEX The exceptional choice for sustainable erosion control to replace hard armour
AUSTRALIAN COMPANY // GLOBAL EXPERTISE PROPEX The exceptional choice for sustainable erosion control to replace hard armour BEFORE AFTER PROPEX LANDLOK PROPEX PYRAMAT PROPEX ARMORMAX BEFORE AFTER Global
SGS India Private Limited, Consumer Testing Services-Laboratory, No. 134, 2 nd Floor, Sivashakthi Nagar, College Road, Tirupur, Tamil Nadu
Last Amended on 03.12.2015 Page 1 of 7 I. TEXTILE MATERIALS 1. Yarn) Linear Density SO-IN-CTS-C02-QU-001 (Version 3.2) ASTM D1907/D1907 M-12 ASTM D 1059: 2001 ISO 7211-5: 1984 BS ISO 7211-5: 1984 ISO 2060:
UL Quality Assurance Private Limited, A-12,Sector-34, Infocity Phase-1,Gurgaon; Haryana. Discipline Mechanical Testing Issue Date
Last Amended on - Page 1 of 22 I. TEXTILE MATERIALS 1. Textile- Fabric/Garment Tensile Strength Strip test BS EN ISO 13934-1: 2013 EN ISO 13934-1: 2013 ISO 13934-1: 2013 ASTM D5035 2011 AS 2001.2.3.1:
Admaterials Technologies Pte Ltd Certificate No. : LA B 58 Sungei Kadut Loop Singapore Issue No. : 14
Admaterials Technologies Pte Ltd Certificate No. : LA-2008-0422-B 58 Sungei Kadut Loop Singapore 729501 Issue No. : 14 Date : 20 September 2018 Page : 1 of 34 FIELD OF TESTING : Civil Engineering Testing
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. AUTONEUM NORTH AMERICA, INC Haggerty Rd. Novi, MI Jian Pan Phone: MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 AUTONEUM NORTH AMERICA, INC. 29293 Haggerty Rd. Novi, MI 48331 Jian Pan Phone: 248 324 2264 MECHANICAL Valid To: October 31, 2017 Certificate Number: 1745.02
Laboratory Certification For. Shakib Dastaggir Construction & Design Company (S-CAD) Laboratory
Laboratory Certification For Shakib Dastaggir Construction & Design Company (S-CAD) Laboratory Lab ID: LCP-006 Issue date: Sept 19, 2016 Expiry date: March 18, 2017 This letter confirms the completion
Surface Protective Systems
Surface Protective Systems Technical information Oxydur VEL-SR Mechanical applied electrically conductive laminate system Base Vinyl ester resin Material Group Membranes Tank- / vessel linings - laminates
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. ACCULAB INC Railroad Drive El Paso, TX Jose Gonzalez Phone: MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ACCULAB INC. 9900 Railroad Drive El Paso, TX 79924 Jose Gonzalez Phone: 915 751 1000 MECHANICAL Valid To: June 30, 2020 Certificate Number: 2692.01 In recognition
TECHNYL A 218 BLACK 21N
TECHNYL A 218 BLACK 21N Description TECHNYL A 218 Black 21 N is an unreinforced polyamide 66, standard viscosity, heat stabilized for injection moulding.it is available in black color. Key Properties Chemical
MATERIAL DATA SHEET* ALPANA d.o.o.
MATERIAL DATA SHEET* ALPANA d.o.o. Contents H-Pur Material Data Sheet... 2 LT-Pur Material Data Sheet... 3 S-Pur Material Data Sheet... 4 XH-Pur Material Data Sheet... 5 XSH-Pur Material Data Sheet...
Engineered Turf Reinforcement. Sustainable erosion control solutions to replace non vegetating hard armour
Engineered Turf Reinforcement Sustainable erosion control solutions to replace non vegetating hard armour Meeting today s environmental challenges Synthetic erosion mats and blankets have become a logical
POLYCAST CELL CAST ACRYLIC Solutions for Aerospace
POLYCAST CELL CAST ACRYLIC Solutions for Aerospace Delivering aircraft transparencies for the demanding aerospace industry. cast cell cast acrylic has been manufactured and trusted by the aerospace industry
RECYCLABILITY EVALUATION PROTOCOL FOR PE FILMS
Phone : +32 2 742 96 82 Fax : +32 2 732 12 18 e-mail : recyclass@plasticsrecyclers.eu website: www.recyclass.eu RECYCLABILITY EVALUATION PROTOCOL FOR PE FILMS Standard Laboratory Practice Version 1.0 Published
Spaceloft Insulation TECHNICAL GUIDE
(Click below to jump to sections.) Contents Introduction 3 Non-Combustibility and Fire Performance 4 EN 13501-1 Reaction to Fire Classification (Bodycote, Warrington Fire) ASTM E 84 Surface Burning Characteristics
Technical Procedure for Pyrolysis-Gas Chromatography/Mass Spectrometry (Py-GC-MS)
Technical Procedure for Pyrolysis-Gas Chromatography/Mass Spectrometry (Py-GC-MS) 1.0 Purpose This technical procedure shall be followed for the operation of the pyrolysis-gas chromatograph-mass spectrometer
List of Malaysian Standard (MS) for Cables. Prepared by MCMA SWO. Cable - Armoured. Cable - Armoured
List of Malaysian Standard (MS) for Cables Prepared by MCMA SWO NO. PUBLICATIONS 1. MS 2100 : 2007 2. MS 2101 : 2007 3. MS 2102 : 2007 4. MS 2103 : 2007 5. MS 2104 : 2007 6. MS 2105 : 2007 7. MS 2106 :
Surface Protective Systems
Surface Protective Systems Technical information Oxydur UP 410 Laminate TI 216 Laminate system for concrete and steel substrates Base Polyester resin, unsaturated Material Group Membranes Tank- / vessel
Our test laboratory - Apparatebau Kirchheim-Teck GmbH
1 / 16 Test laboratory equipment 1 Microsection lab for crimp contacts Tensile, pressure and bending test machine: Static + dynamic Vibration test: Vibration + shock Climate tests: Temperature + humidity
Article: The Formation & Testing of Sludge in Bunker Fuels By Dr Sunil Kumar Laboratory Manager VPS Fujairah 15th January 2018
Article: The Formation & Testing of Sludge in Bunker Fuels By Dr Sunil Kumar Laboratory Manager VPS Fujairah 15th January 2018 Introduction Sludge formation in bunker fuel is the source of major operational
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 GHESQUIERE PLASTIC TESTING, INC. 20450 Harper Avenue Harper Woods, MI 48225 Douglas Leggat Phone: 313 885 3535 Fax: 313 885 1771 E-mail: doug@gptesting.com
POLYETHYLENE High Density
POLYETHYLENE High Density PE-3408/PE-3608 ENGINEERED FOR WATER AND MINING PIPING SYSTEMS PLASTIC MANUFACTURES SINCE 1953 POLYTUBES HIGH MOLECULAR WEIGHT (HMW) High Density Polyethylene Pipe for General
WORLD STAR ENGINEERING
WORLD STAR ENGINEERING 91-Brandreth Road Lahore Pakistan. Tel: (042)37673315-16, Fax:+92-42-37232540 E-mail: worldstarengg@gmail.com, Web: 1 Introduction Established in 1992 Trade in HVAC Equipments, Controls,
CiMEC Technologies Pvt. Ltd., 23/H, Meldi Estate, Gota, Ahmedabad, Gujarat. Discipline Electrical Testing Issue Date
Last Amended on - Page 1 of 6 I. CABLES AND ACCESSORIES 1. PVC Insulated Cables Tests on Conductor: Annealing Test (copper) IS 10810 (Part 1):1984 (RA 2011) 0 to 50 % Tensile Test (Aluminium) IS 10810
Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18436-01-01 according to DIN EN ISO/IEC 17025:2005 Period of validity: 22.01.2018 to 28.10.2019 Holder of certificate: ISP
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 AUTONEUM NORTH AMERICA, INC. 480 West 5 th Street Bloomsburg, PA 17815 Justine Danilowicz Phone: 570 316 6078 MECHANICAL Valid To: April 30, 2019 Certificate
It may not be used for commercial purposes, unless it is reproduced in its entirety
REPORT Assessment of Desso idna X 60-16 with SBR ShockWave in accordance with GAA s Performance and Construction Requirements for Synthetic Turf Pitches Client Desso Sports BV Robert Ramlotstraat 89 Dendermonde
Technical Procedure for Gas Chromatography-Mass Spectrometry (GC-MS)
Technical Procedure for Gas Chromatography-Mass Spectrometry (GC-MS) 1.0 Purpose This technical procedure shall be followed for the operation of the gas chromatograph-mass spectrometer (GC-MS). 2.0 Scope
European Good Practices in. chains Lighter than light Potential of blends from natural fibres and recycled carbon fibres for lightweight applications
European Good Practices in Eco-creativity, creativity, natural fibres & short value chains Lighter than light Potential of blends from natural fibres and recycled carbon fibres for lightweight applications
COMPOSITEs MATERIALS: TEST THEIR QUALITY WITH SGS
COMPOSITEs MATERIALS: TEST THEIR QUALITY WITH SGS Composites are undergoing rapid development, especially in helping to make industrial parts lighter. In this context, SGS is offering its expertise to
Sealon Adhesive PTFE Gasket Tape. Technical Data Sheet
Page 1 of 6 is a versatile, easy to use sealing tape that lets you make your own gaskets in an instant. It s made from expanded PTFE which makes it very easy to shape and allows it to compress with only
The HELIXGUARD management looks back at over 3 decades of experience in Worldwide Application oriented Hydraulic industries.
HELI I GUARDG WELCOME TO HELIXGUARD The HELIXGUARD management looks back at over 3 decades of experience in Worldwide Application oriented Hydraulic industries. Recognizing and understanding the importance
Certificate of Accreditation
Certificate of Accreditation ISO/IEC 17025:2005 Certificate Number L2264.03 Analysts, Inc. 2450 Hassell Road Hoffman Estates IL 60195 has met the requirements set forth in L-A-B s policies and procedures,
Schedule of Accreditation issued by United Kingdom Accreditation Service High Street, Feltham, Middlesex, TW13 4UN, UK
Unit A Shears Way Brooklands Close Sunbury-on-Thames Middlesex TW16 7EE Contact: Mr Craig Stone Tel: +44 (0)1932 732103 Fax: +44 (0)1932 732113 E-Mail: craig.stone@intertek.com Website: SUMMARY OF ACCREDITATION
STS Directory Accreditation number: STS 0228
International standard: ISO/IEC 17025:2005 Swiss standard: SN EN ISO/IEC 17025:2005 TESTEX AG Schweizer Textilprüfinstitut Gotthardstrasse 61 CH-8027 Zürich Head: Responsible for MS: Dr. Jean-Pierre Haug
NZWTA TEXTILE TESTING Price List Valid from 01 July 2017
NZWTA TEXTILE TESTING Price List Valid from 01 July 2017 Carpet Tests Test Method Minimum Sample Size ACCS Full Test Package (6 tests) 1 x 1.5 m, 6 tiles $734.00 Castor Chair Test ISO TR 4918, BS DIN EN
INDUSTRIAL HOSES 1
INDUSTRIAL HOSES 1 WATER HOSES LONG-SU 6 BAR Gardening and general water discharge services. Temperature range: -25 C / +70 C. Tube: NBR/SBR / Natural and synthetic rubber. Cover: SBR, weather and abrasion
Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH German Accreditation Body Annex to the Accreditation Certificate D-PL-20591-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 14.08.2017 to 13.08.2022
Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18869-01-00 according to DIN EN ISO/IEC 17025:2005 Holder of certificate: ilf Forschungs- und Entwicklungsgesellschaft Lacke
TESTING SERVICES OFFERED BY ATIRA TEXTILE & CHEMICAL TEXTILE TESTING LABORATORIES
TESTING SERVICES OFFERED BY ATIRA TEXTILE & CHEMICAL TEXTILE TESTING LABORATORIES Ahmedabad Textile Industry s Research Association P.O. Ambawadi Vistar, Ahmedabad- 380 015 Phones : 91-79-26307921-7922-7923,
VALSIR SUPPLY SYSTEMS MIXAL
TECHNICAL DATA SHEET VALSIR SUPPLY SYSTEMS MIXAL The product Mixal is an extremely flexible multilayer pipe and is therefore ideal for the creation of floor, wall and ceiling radiant heating and cooling
Scope of Accreditation For Global Instrumentation Services, LLC 523 N. Sam Houston Parkway E, Suite 230 Houston, TX Gavin Lewis
Scope of Accreditation For Global Instrumentation Services, LLC 523 N. Sam Houston Parkway E, Suite 230 Houston, TX 77060 Gavin Lewis 832-428-2737 In recognition of a successful assessment to ISO/IEC 17025:2005
What s going on with European Specifications?
What s going on with European Specifications? Jean-Pascal PLANCHE - Total Sept. 15-16, 2003, Las Vegas eurobitume Outline Process of European standardization Current specifications Need for changes CEN/TC336
Material Testing TEXTILE/LEATHER TESTER. Digital Bursting and Strength Tester Strength Tester. Manual Wrap Reel Motor Wrap Reel Spray Tester
TEXTILE/LEATHER TESTER Bursting and Strength Tester Digital Bursting and Strength Tester Accesories Bursting and Strength Tester Manual Wrap Reel Motor Wrap Reel Spray Tester Motor Twist Tester Yarn Inspector
IEC SYSTEM FOR CONFORMITY TESTING AND COMMITTEE OF TESTING LABORATORIES CERTIFICATION OF ELECTRICAL EQUIPMENT
IEC SYSTEM FO CONFOMITY TESTING AND CETIFICATION OF ELECTICAL EQUIPMENT COMMITTEE OF TESTING LABOATOIES =equired by Lab S=May be subcontracted TESTING AND MEASUING EQUIPMENT/ALLOWED SUBCONTACTING Power
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 LABORATORY SERVICES, PETROTRIN Southern Main Road Pointe-A-Pierre, Trinidad, Trinidad & Tobago Peter Bhim Phone: 868 658 4200 CHEMICAL Valid To: November 30,
Submittal Data. Fiberglass Bondstrand 3000A Pipe
Submittal Data Fiberglass Bondstrand 3000A Pipe Uses and Applications Cooling water General service piping Jet fuel piping Mild chemicals Municipal waste Potable water Power plant, steel mill and industrial
VDZ-Service portfolio Concrete and mortar
Verein Deutscher Zementwerke e.v. Research Institute of the Cement Industry VDZ- portfolio Concrete and mortar Synergies gained from current research and expertise VDZ-service portfolio Concrete and mortar
Installation Devices 4
Installation Devices 4 4.1 Tapes HelaTape Flex - Vinyl Electrical Tapes HelaTape Wrap - Vinyl Tapes HelaTape Shield - Conductive Tapes HelaTape Flex 15 - All Purpose Vinyl Insulating Tape HelaTape Flex
innerduct Innerduct INNERDUCT tidbit
innerduct Innerduct Innerduct is manufactured from High Density Polyethylene in accordance with the specifications of ASTM F-2160 and/or NEMA TC 7. Other dimensional requirements may be acceptable upon
Product information. cuturon. neobond pretex
Product information cuturon neobond pretex pretex impregnated special papers neobond robust synthetic fibre papers cuturon versatile nonwovens PRODUCT SPECIFICATION High-quality, impregnated special paper:
TKD SERIES 3-WAY BALL VALVES - TRUE UNION
TKD SERIES 3-WAY BALL VALVES - TRUE UNION The TKD offers a host of advanced features that set it apart from other multi-port valves. The patented seat stop carrier allows for in-line micro-adjustment of