Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
|
|
- Edward Smith
- 6 years ago
- Views:
Transcription
1 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Period of validity: to Holder of certificate: ISP Salzbergen GmbH & Co. KG Neuenkirchener Straße 7, Salzbergen Tests in the fields: chemical and physical-chemical testing of mineral oil and related products, fuels, lubricating oils e.g. used and fresh automotive engine oils (automotive oil, automotive gear oil), grease K, engine test methods, exhaust emission measurement Abbreviations used: see last page The testing laboratory is permitted, without being required to inform and obtain prior approval from DAkkS, to use standards or equivalent testing methods listed here with different issue dates. The listed testing methods are exemplary. The testing laboratory maintains a current list of all testing methods within the flexible scope of accreditation. This document is a translation. The definitive version is the original German annex to the accreditation certificate. 1/25
2 1. Lubricating Oils, Fresh and Used Automotive Engine Oils 1.1 Automotive Oils Kinematic Viscosity at 40 C and 100 C DIN ASTM D ASTM D DIN EN ISO ISO Viscometry - Measurement of kinematic viscosity by means of the Ubbelohde viscometer - Part 1: Viscometer specification and measurement procedure Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (the Calculation of Dynamic Viscosity) Standard Specifications and Operating Instructions for Glass Capillary Viscometers Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity Glass capillary kinematic viscometers - Specifications and operating instructions Apparent Viscosity DIN SAE J Testing of lubricants - Determination of the apparent viscosity of motor oils at low temperature from -5 C to -35 C - Using the cold-cranking simulator (withdrawn) Engine oil viscosity classification ASTM D Standard Test Method for Apparent Viscosity of Engine Oils between -5 C and -30 C using the Cold Cranking Simulator Period of validity: to Translation - 2/25
3 HTHS-Viscosity CEC L ASTM D Measurement of Lubricant Dynamic Viscosity under Conditions of High Shear (HTHS / 150 C) Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer Shear Stability (30 Cycles) CEC L ASTM D Evaluation of the Mechanical Shear Stability of Lubricating Oils containing Polymers (Fuel Injection Pump) Standard Test Method for Shear Stability of Polymer Containing Fluids Using a European Diesel Injector Apparatus at 30 and 90 Cycles Viscosity Index DIN ISO Petroleum products - Calculation of viscosity index from kinematic viscosity Evaporation Loss at 1 h / 250 C DIN CEC L ASTM D Testing of petroleum products - Determination of evaporation loss - Part 1: Noack test Evaporation Loss of Lubricating Oils using the Noack Evaporative Tester Standard Test Method for Evaporation Loss of Lubricating Oil by the Noack Method Pour Point DIN ISO Petroleum products - Determination of pour point Period of validity: to Translation - 3/25
4 ISO ASTM D Petroleum products - Determination of pour point Standard Test Method for Pour Point of Petroleum Products Flash Point (COC) DIN EN ISO ASTM D Petroleum products - Determination of flash and fire points - Cleveland open cup method Standard Test Method for Flash and Fire Points by Cleveland Open Cup Total Base Number DIN ISO ISO ASTM D Petroleum products; total base number; perchloric acid potentiometric titration method Petroleum products - Determination of base number - Perchloric acid potentiometric titration method Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration Colour DIN ISO ASTM D Petroleum products - Determination of colour (ASTM scale) Standard Test Method for ASTM Colour of Petroleum Products (ASTM Colour Scale) Density DIN Testing of mineral oils and related materials - Determination of density- Method Period of validity: to Translation - 4/25
5 DIN EN ISO ASTM D Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter Additive Elements DIN DIN DIN DIN DIN ASTM D ASTM D Testing of lubricants; determination of the content of additive elements; analysis by wavelengthdispersive X- ray fluorescence spectrometry (XRF) Testing of lubricants - Determination of the content of additive elements - Part 3: Direct determination of Ca, Mg, Zn and Ba by optical emission spectral analysis with inductively coupled plasma (ICP OES) (withdrawn) Testing of lubricants - Determination of elements content in additives, wear and other contaminations - Part 1: Direct determination by optical emission spectral analysis with inductively coupled plasma (ICP OES) Testing of lubricants - Determination of elements content of additives, wear and other contaminations - Part 2: Wavelength dispersive X-ray fluorescence spectrometry (XRF) Testing of lubricants - Determination of the magnesium content - Part 2: Analysis by wavelength dispersive X-ray fluorescence spectrometry (XRF) (withdrawn) Standard Test Method for Determination of Additive Elements in Lubricating Oil by Inductively Coupled Plasma Atomic Emission Spectrometry Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oil and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) Period of validity: to Translation - 5/25
6 Phosphorus Content DIN DIN ASTM D ASTM D DIN Testing of petroleum products - Determination of phosphorus content of lubricating oils and additives - Part 3: Direct determination by optical emission spectral analysis with inductively coupled plasma (ICP OES) Testing of lubricants - Determination of elements content in additives, wear and other contaminations - Part 1: Direct determination by optical emission spectral analysis with inductively coupled plasma (ICP OES) Standard Test Method for Determination of Additive Elements in Lubricating Oil by Inductively Coupled Plasma Atomic Emission Spectrometry Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oil and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) Testing of petroleum products - Determination of phosphorus content of lubricating oils and additives - Part 2: Analysis by wavelength dispersive X-ray fluorescence spectrometry (XRF) Chlorine and Bromine Content DIN ISO Petroleum and related products - Determination of chlorine and bromine content - Wavelength-dispersive X-ray fluorescence spectrometry IR-Spectrum DIN Testing of petroleum products and related products - Analysis by infrared spectrometry - General working principles Period of validity: to Translation - 6/25
7 Sulfated Ash DIN ASTM D ISO Testing of mineral oils - Determination of sulfated ash Standard Test Method for Sulfated Ash from Lubricating Oils and Additives Petroleum products - Determination of sulfated ash in lubricating oils and additives Foaming Characteristics ASTM D ISO Corrigedum Standard Test Method for Foaming Characteristics of Lubricating Oils Petroleum products - Determination of foaming characteristics of lubricating oils Carbon Residue DIN EN ISO ASTM D Petroleum products - Determination of carbon residue - Micro method Standard Test Method for Determination of Carbon Residue (Micro Method) MRV ASTM D ASTM D Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature Period of validity: to Translation - 7/25
8 Water Content DIN ISO DIN EN ISO Petroleum products and bituminous materials - Determination of water - Distillation method Petroleum products - Determination of water - Coulometric Karl Fischer titration method Fuel Content DIN ASTM D DIN Testing of lubricants; test for fuel diluent in used automotive engine oils; gas chromatography method Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography Testing of petroleum products - Determination of boiling range distribution - Gas chromatography method Wear Elements DIN DIN ASTM D DIN Testing of lubricants - Determination of wear elements - Part 1: Direct determination by inductively coupled plasma optical emission spectroscopy (ICP-OES) (withdrawn) Testing of lubricants - Determination of wear elements - Part 2: Wavelength dispersive X-ray fluorescence spectrometry (XRF) Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oil and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) Testing of lubricants - Determination of elements content in additives, wear and other contaminations - Part 1: Direct determination by optical emission spectral analysis with inductively coupled plasma (ICP OES) Period of validity: to Translation - 8/25
9 DIN Testing of lubricants - Determination of elements content of additives, wear and other contaminations - Part 2: Wavelength dispersive X-ray fluorescence spectrometry (XRF) Elastomer Compatibility / CEC L CEC L The Evaluation of Oil-Elastomer Compatibility The Evaluation of Oil - Elastomer Compatibility Foaming characteristics at high Temperature (Seq. IV) ASTM D Standard Test Method for High Temperature Foaming Characteristics of Lubricating Oils Acid Number ASTM D ISO Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration Petroleum products and lubricants; neutralization number; potentiometric titration method Base Number ASTM D Standard Test Method for Base Number Determination by Potentiometric Titration Corrosiveness (HTCBT) ASTM D Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 135 C Period of validity: to Translation - 9/25
10 Soot Content DIN CEC L Testing of lubricants; determination of the soot content in used Diesel engine oils; infrared spectrometry Spectrometric Determination of Soot in used Engine Oil Oxidation Resistance GFC Lu-43-A CEC L CEC L Diesel motor oils ageing by oxidation in the presence of (bio) fuel Low Temperature Pumpability Oxidation Test For Engine Oils Operating In The Presence Of Biodiesel Fuel Oxidation / Nitration (IR) DIN Testing of lubricants - Determination of oxidation and nitration of used motor oils - Infrared spectrometric method FAME and Vegetable Oil content / Simulated Distillation DIN E VDA DIN Testing of lubricants - Determination of low boiling components in used engine oils - Capillary gas chromatography Durability Test Elastomere - components in motor vehicles Durability test method - exposure to test oils Testing of rubber and eleastomeres - determination of tensile strength at break, tensile stress at yield, elongation at break and stress values in a tensile test Period of validity: to Translation - 10/25
11 ASTM D DIN ISO DIN EN ISO ASTM D DIN ISO ASTM D Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers - Tension Rubber, vulcanized or thermoplastic - Determination of the effect of liquids Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) Standard Test Method for Rubber Property -Durometer Hardness Rubber, vulcanized or thermoplastic - Determination of hardness Standard Test Method for Determining Automotive Engine Oil Compatibility with Typical Seal Elastomers Kinematic Viscosity CEC L Measurement of Kinematic Viscosity at 100 C of Soot containing Engine Oils Dynamic Viscosity ASTM D Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique Element contents in oils and greases Sulfur (XRF) DIN EN ISO Petroleum products - Determination of sulfur content - Wavelength-dispersive X-ray fluorescence spectrometry Period of validity: to Translation - 11/25
12 Fuel Content ASTM D reapproved 2012 Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Distillation Deposits DIN ASTM D CEC L Testing of petroleum products - Determination of deposition forming tendency in exhaust turbochargers and intercoolers of supercharged diesel engines Standard Test Method for Determination of Moderately High Temperature Piston Deposits by Thermo-Oxidation Engine Oil Simulation Test-TEOST MHT Hot Surface Oxidation Test ( PDSC ) Period of validity: to Translation - 12/25
13 1.2 Automotive Gear Oils Kinematic Viscosity at 40 C and 100 C DIN ASTM D ASTM D DIN EN ISO ISO Viscometry - Measurement of kinematic viscosity by means of the Ubbelohde viscometer - Part 1: Viscometer specification and measurement procedure Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (the Calculation of Dynamic Viscosity) Standard Specifications and Operating Instructions for Glass Capillary Viscometers Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity Glass capillary kinematic viscometers - Specifications and operating instructions Apparent Viscosity ASTM D DIN Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer Testing of lubricants; procedure for measurement of low temperature apparent viscosity by means of the Brookfield viscometer (liquid bath method) Viscosity Index DIN ISO Berichtigung Petroleum products - Calculation of viscosity index from kinematic viscosity Period of validity: to Translation - 13/25
14 Pour Point DIN ISO Petroleum products - Determination of pour point ASTM D DIN EN ISO ASTM D Standard Test Method for Pour Point of Petroleum Products Flash Point Petroleum products - Determination of flash and fire points - Cleveland open cup method Standard Test Method for Flash and Fire Points by Cleveland Open Cup Colour DIN ISO Petroleum products - Determination of colour (ASTM scale) ASTM D Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale) Density DIN DIN EN ISO ASTM D ASTM D Testing of mineral oils and related materials - Determination of density- Method 3 Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter Foaming Characteristics Standard Test Method for Foaming Characteristics of Lubricating Oils Period of validity: to Translation - 14/25
15 ISO Petroleum products - Determination of foaming characteristics of lubricating oils DIN Neutralization Number Testing of Mineral Oils; Determination of the Neutralization Number, Colour-indicator titration Sulfur (XRF) DIN EN ISO DIN ISO Petroleum products - Determination of sulfur content - Wavelength-dispersive X-ray fluorescence spectrometry Element contents in oils and greases Petroleum and related products - Determination of chlorine and bromine content - Wavelength-dispersive X- ray fluorescence spectrometry Sulfated Ash DIN ASTM D Testing of mineral oils - Determination of sulfated ash Standard Test Method for Sulfated Ash from Lubricating Oils and Additives ISO DIN Petroleum products - Determination of sulfated ash in lubricating oils and additives Additive Elements Testing of lubricants; determination of the content of additive elements - part 2 ; analysis by wavelengthdispersive X-ray spectrometry (XRF) Period of validity: to Translation - 15/25
16 Testing of lubricants - Determination of the content of DIN additive elements - Part 3: Direct determination of Ca, Mg, Zn and Ba by optical emission spectral analysis with inductively coupled plasma (ICP OES) (withdrawn) DIN DIN DIN ASTM D ASTM D Testing of lubricants - Determination of elements content in additives, wear and other contaminations - Part 1: Direct determination by optical emission spectral analysis with inductively coupled plasma (ICP OES) Testing of lubricants - Determination of elements content of additives, wear and other contaminations - Part 2: Wavelength dispersive X-ray fluorescence spectrometry (XRF) Testing of lubricants - Determination of the magnesium content - Part 2: Analysis by wavelength dispersive X-ray spectrometry (XRF) (withdrawn) Standard Test Method for Determination of Additive Elements in Lubricating Oil by Inductively Coupled Plasma Atomic Emission Spectrometry Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oil and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) Water Content DIN ISO DIN EN ISO Petroleum products and bituminous materials - Determination of water - Distillation method Petroleum products - Determination of water - Coulometric Karl Fischer titration method Period of validity: to Translation - 16/25
17 Steel Corrosion DIN ISO Corrigenda ASTM D Petroleum products and lubricants - Petroleum oils and other fluids - Determination of rust-preventing characteristics in the presence of water Standard Test Method for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water Corrosion Test DIN EN ISO ASTM D Petroleum products - Corrosiveness to copper - Copper strip test Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test Shear Stability CEC L Viscosity Shear Stability of Transmission Lubricants (Taper Roller Bearing Rig) Total Base Number DIN ISO ISO ASTM D Petroleum products; total base number - perchloric acid potentiometric titration method Petroleum products - Determination of base number - Perchloric acid potentiometric titration method Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration Period of validity: to Translation - 17/25
18 Phosphorus Content DIN DIN ASTM D ASTM D DIN DIN Testing of petroleum products - Determination of phosphorus content of lubricating oils and additives - Part 3: Direct determination by optical emission spectral analysis with inductively coupled plasma (ICP OES) Testing of lubricants - Determination of elements content in additives, wear and other contaminations - Part 1: Direct determination by optical emission spectral analysis with inductively coupled plasma (ICP OES) Standard Test Method for Determination of Additive Elements in Lubricating Oil by Inductively Coupled Plasma Atomic Emission Spectrometry Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oil and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) Testing of petroleum products - Determination of phosphorus content of lubricating oils and additives - Part 2: Analysis by wavelength dispersive X-ray fluorescence spectrometry (XRF) Boron Content Testing of lubricants - Determination of the boron content - Part 2: Direct determination by optical emission spectral analysis with inductively coupled plasma (ICP OES) Oxidation Stability CEC L-48-A Oxidation Stability of Lubricating Oils used in Automotive Transmissions by Artificial Ageing Period of validity: to Translation - 18/25
19 FZG-Tests DIN ISO Berichtigung CEC L CEC L Gears - FZG test procedures - Part 1: FZG test method A/8,3/90 for relative scuffing load-carrying capacity of oils Load Carrying Capacity Test for Transmission Lubricants (FZG Gear Machine) FZG Scuffing Load Carrying Capacity Test for High EP Oils Wear Elements DIN DIN DIN ASTM D Testing of lubricants - Determination of wear elements - Part 2: Wavelength dispersive X-ray fluorescence spectrometry (XRF) Testing of lubricants - Determination of elements content in additives, wear and other contaminations - Part 1: Direct determination by optical emission spectral analysis with inductively coupled plasma (ICP OES) Testing of lubricants - Determination of elements content of additives, wear and other contaminations - Part 2: Wavelength dispersive X-ray fluorescence spectrometry (XRF) Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oil and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) Acid Number ASTM D ISO Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration Petroleum products and lubricants - neutralization number - potentiometric titration method Period of validity: to Translation - 19/25
20 Infrared Spectrometric Analysis DIN ASTM D Testing of petroleum products and related products - Analysis by infrared spectrometry - General working principles TBN Standard Test Method for Base Number Determination by Potentiometric Titration Filterability DIN ISO DIN ISO Petroleum products - Determination of the filterability of lubricating oils - Part 1: Procedure for oils in the presence of water Petroleum products - Determination of the filterability of lubricating oils - Part 2: Procedure for dry oils Flender foam Test Procedure ISO ASTM D reapproved 2012 Lubricants, industrial oils and related products - Determination of the foaming and air release properties of industrial gear oils using a spur gear test rig - Flender foam test procedure PAI Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation TOST DIN EN ISO Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids; TOST test - Part 1: Procedure for mineral oils Period of validity: to Translation - 20/25
21 2. Lubricating Grease K Cone Penetration DIN ISO Petroleum products - Lubricating grease and petrolatum Determination of cone penetration (Point 7: measurement of worked-penetration) Water Behaviour DIN Testing of lubricants; Test of the behaviour of lubricating greases in the presence of water - Static test FAG FE DIN DIN Testing of lubricants; test using the FAG roller bearing grease testing apparatus FE9 - part 1: general working principles Testing of lubricants; test using the FAG roller bearing grease testing apparatus FE9 - part 2: test method A/1500/6000 Oxidation Stability DIN Testing of lubricants; determination of oxidation stability of greases, oxygen method (withdrawn) DIN ISO Corrosion Test Testing lubricating greases for their corrosion-inhibiting properties by the SKF Emcor method Petroleum products and lubricants - Determination of rust-prevention characteristics of lubricating greases Period of validity: to Translation - 21/25
22 Copper Corrosion DIN Testing of lubricants; testing of corrosiveness to copper of greases - copper strip tarnish test Water Content DIN ISO DIN Petroleum products and bituminous materials - Determination of water - Distillation method Oil Separation Testing of lubricants - Determination of oil separation from greases under static conditions Dropping Point DIN ISO DIN ISO DIN EN ISO DIN DIN Petroleum products - Lubricating grease - Determination of dropping point Elastomer Testing Rubber, vulcanized or thermoplastic - Determination of the effect of liquids Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) VKA Wear Chracterisitic of Grease Testing of lubricants - Testing in the four-ball tester - Part 1: General working principles Testing of lubricants - Testing in the four-ball tester - Part 5: Determination of wearing characteristics for consistent lubricants Period of validity: to Translation - 22/25
23 Determination of solid matter content (<25 µm) of lubricating greases DIN Testing of lubricants - Determination of solid matter content of lubricating greases (particle sizes above 25 µm) NLGI-Grades DIN Lubricants - consistency classification of lubricating greases - NLGI grades VKA Welding Load Consistent of Lubricants DIN Testing of lubricants - Testing in the four-ball tester - Part 4: Determination of welding load of consistent lubricants 3. Engine test methods CEC L CEC-L CEC L-104 (DRAFT) 2016 Fuel Economy Effects of Engine Lubricants The evaluation of engine crankcase lubricants with respect to low temperature lubricant thickening and wear under severe operating conditions (OM 646 LA) Engine Oil Performance Test to Measure the Effects of Biodiesel, using the DC OM646 DE 22 LA Period of validity: to Translation - 23/25
24 4. Any other analysis FE 8 DIN DIN Testing of lubricants - Mechanical-dynamic testing in the roller bearing test apparatus FE8 - Part 1: General working principles Testing of lubricants - Mechanical-dynamic testing in the roller bearing test apparatus FE8 - Part 3: Test method for lubricating oils, axial cylinder roller bearing VKA Lubricants DIN DIN DIN Testing of lubricants - Testing in the four-ball tester - Part 1: General working principles Testing of lubricants - Testing in the four-ball tester - Part 2: Determination of welding load of liquid lubricants Testing of lubricants - Testing in the four-ball tester - Part 3: Determination of wearing characteristics of liquid lubricants Air-release properties DIN ISO Petroleum and related products - Determination of air-release properties of steam turbine and other oils - Impinger method Elements Middle Distillates ASTM D Determination of Trace Elements in Middle Distillate Fuels by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) Oxidation Stability (Rancimat) FAME DIN EN Fat and oil derivatives - Fatty acid methylesters (FAME) - Determination of oxidation stability (accelerated oxidation test) Period of validity: to Translation - 24/25
25 5. Exhaust emission measurement ECE-R-83 Type approval 1 Type I: verifying the average exhaust emissions after a cold start Abbreviations used: ASTM CEC DIN EN FAME ISO Process-Matrix- American Society for Testing and Materials Coordinating European Council Deutsches Institut für Normung e.v. European Standard (Europäische Norm) fatty acid methyl ester (Fettsäuremethylester) International Organization for Standardization Number of the characteristics within the Process-Matrix for Mineral Oel (72 FB Version 1.2, August 2017) Period of validity: to Translation - 25/25
Annex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 20281 01 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 31.08.2016 to 30.08.2021 Holder of certificate: Deutsche
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH German Accreditation Body Annex to the Accreditation Certificate D-PL-20591-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 14.08.2017 to 13.08.2022
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17640-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 18.12.2017 to 04.11.2018 Holder of certificate: Haltermann
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11057-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 20.06.2014 to 19.06.2019 Holder of certificate: OELCHECK
More informationSCOPE OF ACCREDITATION
Standards Council of Canada 600-55 Metcalfe Street Ottawa, ON K1P 6L5 Canada Conseil canadien des normes 55, rue Metcalfe, bureau 600 Ottawa, ON K1P 6L5 Canada SCOPE OF ACCREDITATION InnoTech Alberta Inc.
More informationParagon Scientific Ltd Proficiency Testing Scheme Schedule
Paragon Scientific Ltd Proficiency Testing Scheme Schedule Proficiency Testing Scheme Schedule Page 1 of 16 Issue : 29/01/2015 Print : 25/06/2018 Viscosity ASTM D445 - Standard Test Method for Kinematic
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SOUTHWEST RESEARCH INSTITUTE Office of Automotive Engineering Fuels and Lubricants Research Division 6220 Culebra Road, P.O. Drawer 28510 San Antonio, TX 78228-0510
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SOUTHWEST RESEARCH INSTITUTE Office of Automotive Engineering Fuels and Lubricants Research Division 6220 Culebra Road, P.O. Drawer 28510 San Antonio, TX 78228-0510
More informationStandard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion
IAS Accreditation Number Company Name Address Contact Name Telephone +966-14-398-2118 Effective Date of Scope May 1, 2018 Accreditation Standard ISO/IEC 17025:2017 TL-743 Yanbu Industrial Area Yanbu, Madina
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17043:2010. ASTM INTERNATIONAL 100 Barr Harbor Drive West Conshohocken, PA Amy Meacock
SCOPE OF ACCREDITATION TO ISO/IEC 17043:2010 ASTM INTERNATIONAL 100 Barr Harbor Drive West Conshohocken, PA 19428 Amy Meacock 610 832 9688 PROFICIENCY TESTING PROVIDER Valid To: May 31, 2021 Certificate
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service High Street, Feltham, Middlesex, TW13 4UN, UK
Unit A Shears Way Brooklands Close Sunbury-on-Thames Middlesex TW16 7EE Contact: Mr Craig Stone Tel: +44 (0)1932 732103 Fax: +44 (0)1932 732113 E-Mail: craig.stone@intertek.com Website: SUMMARY OF ACCREDITATION
More informationSavant Labs Laboratory Testing Services. Tests by Method
ASTM D86 Distillation 400 ml ASTM D92 Fire Point, Cleveland Open Cup 250 ml ASTM D92 Flash Point and Fire Point, Cleveland Open Cup 250 ml ASTM D92 Flash Point, Cleveland Open Cup 250 ml ASTM D93 Flash
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK SGS West Thurrock Laboratory Contact: David Mercer (Laboratory Manager) 859 London Road Tel: +44 (0)1708 681943 West Thurrock Fax: +44 (0)1708
More informationISBN SANS 342:2006 Edition 4 SOUTH AFRICAN NATIONAL STANDARD Automotive diesel fuel Published by Standards South Africa 1 dr lategan roa
ISBN 0-626-18752-4 SOUTH AFRICAN NATIONAL STANDARD Automotive diesel fuel Published by Standards South Africa 1 dr lategan road groenkloof private bag x191 pretoria 0001 tel: 012 428 7911 fax: 012 344
More informationAnnex no. 1 of Accreditation Certificate no. LI 333 from
Valid from 04.02.2008 to 04.02.2012 Oil Products Laboratory DJ No. 226, Nvodari, Constana county belonging to SC ROMPETROL QUALITY CONTROL SRL 1 2 3 4 Physical tests 1. Determination of the density with
More informationISO INTERNATIONAL STANDARD
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 11158 Second edition 2009-09-15 Corrected version 2009-12-01 Lubricants, industrial oils and related products (class L) Family H (hydraulic systems)
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 0-626-18752-4 SANS 342:2006 SOUTH AFRICAN NATIONAL STANDARD Automotive diesel fuel Published by Standards South Africa 1 dr lategan road groenkloof private bag x191 pretoria 0001 tel: 012 428 7911
More informationSoftening point by Ring & Ball. Density and relative density of liquids by Hubbart pycnometer
Softening point by Ring & Ball Density and relative density of liquids by Hubbart pycnometer Distillation of petroleum Melting point of petroleum wax Precipitation number of lubricating oils Saponification
More informationScope of testing. State: March Contents: siemens.com/energy
Scope of testing State: March 2017 Siemens AG - Material testing laboratory Nuremberg Contents: 1. Our services 2. Quality assurance 3. Sampling and bottles 4. Scope of testing of material testing laboratory
More informationCoefficient of Friction of Lubricants D 5707 p. 69 Coking Value D 4715 p. 70 Cold Cranking Simulator Manual Method D 2602 p. 71 Automatic Method--see
Introduction p. 1 Explanation of Terms p. 2 Test Method Equivalence p. 3 Alphanumeric Index of Standards p. 5 Acid Number Colorimetric Titration--see also Base Number, p. 43 D 974 p. 11 Potentiometric
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 LABORATORY SERVICES, PETROTRIN Southern Main Road Pointe-A-Pierre, Trinidad, Trinidad & Tobago Peter Bhim Phone: 868 658 4200 CHEMICAL Valid To: November 30,
More informationISO Petroleum products Fuels (class F) Specifications of marine fuels
INTERNATIONAL STANDARD ISO 8217 Fifth edition 2012-08-15 Petroleum products Fuels (class F) Specifications of marine fuels Produits pétroliers Combustibles (classe F) Spécifications des combustibles pour
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL18398-02-01 according to DIN EN ISO/IEC 17025:2005 Period of validity: 26.02.2018 to 25.02.2023 Holder of certificate: SAL
More information10.6 Scope of Accreditation
Testing Laboratory Accreditation is accredited by the GCC Accreditation Center () in accordance with the recognised International Standard, General requirements for the competence of testing and calibration
More informationALL TESTS. Density Oscillating U-tube method * IP 365. Distillation characteristics of petroleum products - Micro distillation method IP 596
Tests marked * are ISO17025 accredited ALL TESTS TEST NAME Density Oscillating U-tube * IP 365 Distillation characteristics of petroleum products - Micro distillation IP 596 Mercaptans, hydrogen sulphide,
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 15380 Third edition 2016-12-01 Lubricants, industrial oils and related products (class L) Family H (Hydraulic systems) Specifications for hydraulic fluids in categories HETG,
More informationGB Translated English of Chinese Standard: GB NATIONAL STANDARD
Translated English of Chinese Standard: GB18351-2015 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 75.160.20 E 31 GB 18351-2015 Replacing
More informationGB Translated English of Chinese Standard: GB NATIONAL STANDARD OF THE
Translated English of Chinese Standard: GB17930-2013 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 75.160.20 E 31 GB 17930-2013 Replacing
More information1.1 Unless otherwise stated, the specification references and test methods are from the latest version in effect at the time of this contract.
(Page 1 of 6) LUBRICATING PRODUCTS MGS-92-12K 1.0 DESCRIPTION. This specification covers motor vehicle lubricating products for delivery in prepackaged containers such as drums, pails, etc., or for delivery
More informationASTM D Standard Specification for Biodiesel Fuel (B 100) Blend Stock for Distillate Fuels
ASTM D 6751 02 Standard Specification for Biodiesel Fuel (B 100) Blend Stock for Distillate Fuels Summary This module describes the key elements in ASTM Specifications and Standard Test Methods ASTM Specification
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that EPA National Vehicle and Fuel Emissions Laboratory
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11272-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 18.10.2017 to 17.10.2022 Holder of certificate: VDZ
More informationSignificance of Each Test. 1. Color (Visual)
Significance of Each Test 1. Color (Visual) Determine the color of lubricant product by assessing the appearance of transmitted light appearance and intensity, as compare with a standard. Color alone is
More informationMITRAS MATERIALS GMBH
MITRAS MATERIALS GMBH Friedrich-Ochs-Str. 2 92637 Weiden/Opf. Tel.: 0961 / 89-810 / 89-812 Fax: 0961 / 89-672 Directory of services L a b o r a t o r y MITRAS MATERIALS GMBH Edition 02/18 Rev. 08 page
More informationISO 8217 INTERNATIONAL STANDARD. Petroleum products Fuels (class F) Specifications of marine fuels
INTERNATIONAL STANDARD ISO 8217 Fourth edition 2010-06-15 Petroleum products Fuels (class F) Specifications of marine fuels Produits pétroliers Combustibles (classe F) Spécifications des combustibles pour
More informationStandard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels 1
Designation: D 6751 03a An American National Standard Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels 1 This standard is issued under the fixed designation D 6751;
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17435-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 06.12.2017 to 08.12.2018 Holder of certificate: k3works
More informationStandard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels 1
Designation: D 6751 07a An American National Standard Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels 1 This standard is issued under the fixed designation D 6751;
More informationLOW TEMPERATURE OPERABILITY STARTABILITY & CHARACTERISTICS
ENGINE OIL TESTS LOW TEMPERATURE OPERABILITY STARTABILITY & CHARACTERISTICS The ability of an engine oil to flow or be pumped at low temperatures especially at start up is critical to the life of an engine.
More informationAnnex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 11140 18 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 06.11.2014 to 05.11.2019 Holder of certificate: Fraunhofer
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17435-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 30.09.2016 to 08.12.2018 Holder of certificate: k3works
More informationRENOLIN CLP PLUS Long-term approved special gear oils with extremely high ageing stability and excellent detergency (DD) selfcleaning
Long-term approved special gear with extremely Description Special lubricants are designed to solve problems and to guarantee trouble-free working at severe ambient conditions. The products of the RENOLIN
More informationSynthetic EP air compressor oils based on PAO, for turbo, screw, vane and piston compressors; High-performance synthetic, PAO-based hydraulic fluids
Description Compressed air has become a major form of energy and the reliable generation of compressed air is vital. Operators require compressors to function perfectly over and beyond entire service intervals.
More informationThe Importance of Engine Oil Quality for the Automotive Industry
The Importance of Engine Oil Quality for the Automotive Industry SSM Presentation Luzern, September 25, 08 Author: ReinhardBütehorn, GMPT-E Base Engine Lubrication Systems 1 The Importance of Engine Oil
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60296 Third edition 2003-11 Fluids for electrotechnical applications Unused mineral insulating oils for transformers and switchgear IEC 2003 Copyright - all rights reserved No
More informationENGINEERED LUBRICANTS CO.
ENGINEERED LUBRICANTS CO. LABORATORY FEE SCHEDULE Effective August 1, 2017 Page 1 of 5 Please send in SDS with samples. If you do not have an SDS please give a generic make-up of the product. (If we do
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-20575-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 2018-03-05 to 2021-07-28 Holder of certificate: innogy
More informationTest Methods & Procedures Spec Numbers Description
METHODS & PROCEDURES Test Methods & Procedures Test Methods & Procedures Spec Numbers Description Air Release Value Minutes to 0.2% air @ 50 Aniline Point Anti-Wear Vane Pump Test 250 hours, 140 bar @
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17453-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 03.07.2017 to 02.07.2022 Holder of certificate: SPIE
More informationPLANTOGEAR S. Environmentally acceptable lubricating oil and EP industrial gear oil based on synthetic saturated esters.
Description PLANTOGEAR 100 S and 150 S products are environmentally acceptable industrial gear oils based on special saturated synthetic esters which guarantee high ageing resistance and excellent wear
More informationDraft Indian Standard SYN GAS/ AMMONIA TURBO COMPRESSOR LUBRICATING OILS SPECIFICATION
Comments Only BUREAU OF INDIAN STANDARDS Draft Indian Standard Doc:PCD 3(2537)C September 2012 SYN GAS/ AMMONIA TURBO COMPRESSOR LUBRICATING OILS SPECIFICATION Not to be reproduced without the permission
More informationILSAC GF-5 STANDARD FOR PASSENGER CAR ENGINE OILS. January 23, Jointly developed and approved by
This ILSAC standard is being developed with input from automobile manufacturers, lubricant producers and lubricant additive companies in a process that is open to public review. INTERNATIONAL LUBRICANT
More informationINTERNATIONAL LUBRICANT STANDARDIZATION
This ILSAC standard is being developed with input from automobile manufacturers, lubricant producers and lubricant additive companies in a process that is open to public review. INTERNATIONAL LUBRICANT
More informationUNIFIED FACILITIES GUIDE SPECIFICATIONS
USACE / NAVFAC / AFCEC / NASA UFGS-48 06 15 (May 2014) ---------------------------------- Preparing Activity: USACE Superseding UFGS-48 13 19.00 10 (January 2008) UNIFIED FACILITIES GUIDE SPECIFICATIONS
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-33225-9 SOUTH AFRICAN NATIONAL STANDARD Automotive fuels Requirements and test methods for diesel WARNING This document references other documents normatively. Published by SABS Standards
More informationPLANTOGEAR S. Environmentally acceptable lubricating oil and EP industrial gear oil based on synthetic saturated esters.
Description PLANTOGEAR S products are environmentally acceptable industrial gear oils based on special saturated synthetic esters which guarantee high ageing resistance and excellent wear protection -
More informationAnnex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 11238 01 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 09.02.2016 to 08.02.2021 Holder of certificate: ContiTech
More informationRENOSAFE FireProtect 46, 68 Fire resistant hydraulic fluid, based on new ester and additive technology, Type HFDU
Description RENOSAFE FireProtect products are fire resistant hydraulic fluids based on special synthetic esters. The selected organic ester base oils have highest purity and show high oxidation and thermal
More informationACEA EUROPEAN OIL SEQUENCES
EUROPEAN OIL SEQUENCES 2016 SERVICE FILL ENGINE OILS for GASOLINE & LIGHT DUTY DIESEL ENGINES (A/B Categories), GASOLINE & LIGHT DUTY DIESEL ENGINES with EXHAUST AFTERTREATMENT DEVICES (C Categories),
More informationElemental Analysis of Biofuels with SPECTRO XRF and ICP Spectrometers
Elemental Analysis of Biofuels with SPECTRO XRF and ICP Spectrometers With a complete range of Energy Dispersive X-ray Fluorescence (ED-XRF) and Inductively Coupled Plasma Optical Emission (ICP-OES) Spectrometers,
More informationCertificate of Accreditation
Certificate of Accreditation ISO/IEC 17025:2005 Certificate Number L2264.03 Analysts, Inc. 2450 Hassell Road Hoffman Estates IL 60195 has met the requirements set forth in L-A-B s policies and procedures,
More informationEDICT ± OF GOVERNMENT
EDICT ± OF GOVERNMENT Inordertopromotepubliceducationandpublicsafety,equal justiceforal,abeterinformedcitizenry,theruleoflaw,world tradeandworldpeace,thislegaldocumentisherebymade availableonanoncommercialbasis,asitistherightofal
More informationAnnex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 18438 02 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 11.03.2014 to 10.03.2019 Holder of certificate: Jürgen
More informationFREQUENTLY ASKED QUESTIONS (FAQs)
FREQUENTLY ASKED QUESTIONS (FAQs) What are the Petrochemicals? Any chemical derived from crude oil,crude products or natural gas. Where the petrochemicals are used? In the manufacture of Synthetic rubber,
More informationATC ATIEL ACEA CONCAWE. CEC Board
CEC 2010 - Organisation and its Role in Developing Fuels and Lubricant Tests for the European Automotive Industry. UNITI MineralÖl lt Techhnologie Forum 17 th March 2010 The Co-ordinating ordinating European
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
eutsche Akkreditierungsstelle Gmb Annex to the Accreditation Certificate -PL-19399-01-00 according to IN EN ISO/IEC 17025:2005 ate of issue: 29.11.2018 older of certificate: Inspectorate eutschland Gmb
More informationGB Translated English of Chinese Standard: GB NATIONAL STANDARD
Translated English of Chinese Standard: GB17930-2016 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 75.160.20 E 31 GB 17930-2016 Replacing
More information10.6 Schedule of Accreditation
GEO-CHEM Middle East Laboratory No. ATL0015 is accredited by the GCC Accreditation Center () in accordance with the recognised International Standard, General requirements for the competence of testing
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17579-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 07.07.2017 to 06.07.2022 Holder of certificate: gammatest
More informationWind Turbine Gear Lubricants
October 2015 Wind Turbine Gear Lubricants PCIMA TIR: External 2 JLPrince 2015 Exxon Mobil Corporation. All rights reserved. Overview Wind Turbine Gear boxes Challenges and Lubrication Impact Lubricant
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 LABORATORY & ON-STREAM ANALYSER DIVISION, SAUDI ARAMCO TOTAL REFINING AND PETROCHEMICAL COMPANY LAB & OSA Division Saudi Aramco Total Refining and Petrochemical
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18869-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 30.08.2013 to 29.08.2018 Holder of certificate: ilf
More informationSampling kits and test suites
Shell LubeAnalyst Sampling kits and test suites Oil sampling kits and test suites Basic K1 - Transport Monitors wear & contamination Basic Plus K1+ - Transport Determines optimum drain intervals Differentials,
More information10.6 Scope of Accreditation
GEO-CHEM Middle East Laboratory No. ATL0015 is accredited by the GCC Accreditation Center () in accordance with the recognised International Standard, General requirements for the competence of testing
More informationINDUSTRIAL GEARBOX OILS PARTHAN EP
INDUSTRIAL GEARBOX OILS PARTHAN EP These are premium quality oils manufactured from high quality base stocks fortified with extreme pressure additives, antifoam, antirust and antioxidation agents, thereby
More information#203SW Wind Turbine Oil ISO 220, 320, 460 and 680
#203SW Wind Turbine Oil ISO 220, 320, 460 and 680 Wind Turbine Oil is a para-synthetic extreme pressure gear lubricant that is designed for use in the lubrication of heavily loaded gears and rolling element
More informationACEA EUROPEAN OIL SEQUENCES
EUROPEAN OIL SEQUENCES 2016 SERVICE FILL ENGINE OILS for GASOLINE & LIGHT DUTY DIESEL ENGINES (A/B Categories), GASOLINE & LIGHT DUTY DIESEL ENGINES with EXHAUST AFTERTREATMENT DEVICES (C Categories),
More informationCONTENTS. Introduction 1 Explanation of Terms 2 Table I Test Method Equivalence 3 Table II Alphanumeric Index of Standards 6
vii CONTENTS Introduction 1 Explanation of Terms 2 Table I Test Method Equivalence 3 Table II Alphanumeric Index of Standards 6 Analysis Reference ASTM Standard ACID NUMBER by color indicator titration
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11065-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 08.02.2016 to 07.02.2021 Holder of certificate: Actemium
More informationGas-oil: Gas-oil for diesel engines
Draft SI 107 part 1 March 2014 ICS Code 75.160.20 Gasoil: Gasoil for diesel engines This Standard shall come into force as of This document is only a proposal The Standards Institution of Israel 42 Haim
More informationBEARING OILS FOR STEEL PLANTS HP FILM OIL
BEARING OILS FOR STEEL PLANTS HP FILM OIL Special Features: HP FILM OILS are highly refined mineral oils suitable for oil film bearings used in steel plants. The product is blended from solvent extracted
More informationISO 4925 INTERNATIONAL STANDARD. Road vehicles Specification of non-petroleum-base brake fluids for hydraulic systems
INTERNATIONAL STANDARD ISO 4925 Second edition 2005-02-01 Road vehicles Specification of non-petroleum-base brake fluids for hydraulic systems Véhicules routiers Spécifications pour liquides de frein à
More informationVHG Labs, Inc. Standards and Supplies for Spectrochemical Oil Analysis
VHG Labs, Inc. Standards and Supplies for Spectrochemical Oil Analysis Metallo-Organic Standards from VHG Labs VHG Labs has been a provider of quality analytical products and services for over 25 years.
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Issue No: 031 Issue date: 21 ugust 2018 ccredited to Unit 7 Prince William Drive
More informationISO 8217 INTERNATIONAL STANDARD. Petroleum products Fuels (class F) Specifications of marine fuels
INTERNATIONAL STANDARD ISO 8217 Third edition 2005-11-01 Petroleum products Fuels (class F) Specifications of marine fuels Produits pétroliers Combustibles (classe F) Spécifications des combustibles pour
More informationTHE INFLUENCE OF BIODIESEL FUELS ON LUBRICITY OF PASSENGER CAR DIESEL ENGINE OILS
FASCICLE VIII, (XVI), ISSN -59, Issue 5 THE INFLUENCE OF BIODIESEL FUELS ON LUBRICITY OF PASSENGER CAR DIESEL ENGINE OILS Laura PETRARU, Frantz NOVOTNY-FARKAS OMV Refining & Marketing GmbH, Competence
More informationAPI Engine Oil Licensing and Certification System (EOLCS) Licensees API Lubricants Group Other Interested Parties
Kevin Ferrick Sr. Manager, Engine Oil Licensing and Certification System Global Industry Services 1220 L Street, NW Washington, DC 20005-4070 USA Telephone 1-202-682-8233 Fax 1-202-962-4739 Email ferrick@api.org
More informationCOMPRESSOR OILS HYCOM VDL T 32, 46, 68, 100, 150, 220, 320
COMPRESSOR OILS HYCOM VDL T 32, 46, 68, 100, 150, 220, 320 Special Features: It is specially blended from saturated paraffinic Group II base stocks and selected premium grade of antioxidants, anti-rust,
More informationENGINEERING AND CONSTRUCTION BULLETIN
ENGINEERING AND CONSTRUCTION BULLETIN No. 2007-21 Issuing Office: CECW-CE Issued: 16 Nov 2007 Subject: Revision to EM 1110-2-1424 Lubricants and Hydraulic Fluids - Appendix C Applicability: Guidance 1.
More informationDETAIL SPECIFICATION FUEL, NAVAL DISTILLATE. This specification is approved for use by all Departments and Agencies of the Department of Defense.
METRIC 14 August 2012 SUPERSEDING MIL-DTL-16884L 23 October 2006 DETAIL SPECIFICATION FUEL, NAVAL DISTILLATE This specification is approved for use by all Departments and Agencies of the Department of
More informationOIL PT. Scheme Description. Oils and Fuels Analysis Proficiency Testing Scheme
OIL PT Oils and Fuels Analysis Proficiency Testing Scheme Scheme Description LGC Standards Proficiency Testing 1 Chamberhall Business Park Chamberhall Green Bury, BL9 0AP UK. Telephone: +44 (0) 161 762
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-19722-01-00 according to DIN EN ISO/IEC 17025:2005 Holder of certificate: Institut für Lacke und Farben Magdeburg ggmbh Fichtestraße
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 20847 First edition 2004-03-15 Petroleum products Determination of sulfur content of automotive fuels Energy-dispersive X-ray fluorescence spectrometry Produits pétroliers Détermination
More informationBallot API 1509, Annex G Phosphorus Limits for Universal Oil. Instructions
Instructions Ballot for API 1509, Annex G - Stripped Viscosity Footnote Universal Oils have an API C Category Classification (for Diesel Engine Oils) with an API S Category Classification (for Gasoline
More informationAPI Engine Oil Licensing and Certification System (EOLCS) Licensees API Lubricants Group Other Interested Parties
Kevin Ferrick Sr. Manager, Engine Oil Licensing and Certification System Global Industry Services 1220 L Street, NW Washington, DC 20005-4070 USA Telephone 1-202-682-8233 Fax 1-202-962-4739 Email ferrick@api.org
More informationACCREDITED LABORATORY
A2LA has accredited THE AMERICAN ASSOCIATION FOR LABORATORY ACCREDITATION ACCREDITED LABORATORY AKRON RUBBER DEVELOPMENT LABORATORY, INC. Akron, OH for technical competence in the field of Mechanical Testing
More informationKlübersynth GH 6 oils Synthetic gear and high temperature oils
Klübersynth GH 6 oils Benefits for your application The oils meet the requirements according to DIN 51 517 03, CLP. Corresponding gears can be switched to Klübersynth GH 6 oils without prior consultation
More informationIGS-M-CH-044-1(0) Sept IGS. Iranian Gas Standards !" #$%&' () Insulating Oils for use in Power Transformers Part 1
IGS-M-CH-044-1(0) Sept. 2008 APPROVED IGS Iranian Gas Standards!" #$%&' () Insulating Oils f use in Power Transfmers Part 1. Fax:(9821)-8131-5679 1123 456728 9:1;7?7 @A9?;1 BE8 4FG= HA2IJ 4K LMN
More informationTests conducted under the following industry standards for PermaFrost API ASHRAE ARI ASTM EPA ANSI UL. SINCE 1985 Quality Controlled Through Analysis
Tests conducted under the following industry standards for PermaFrost API ASHRAE ARI ASTM EPA ANSI UL SINCE 1985 Client: Powertron LLC Requested By: Mr. Tony Sgarbi Sample: 10% PermaFrost + 90% Report
More information