Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Size: px
Start display at page:

Download "Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005"

Transcription

1 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Period of validity: to Holder of certificate: SAL GmbH At the location: Auf der Lind 10, Waldems s in the fields: Health Care (Hygiene) ing area: Hospital Hygiene / Microbial hygienic tests Within the given testing field marked with *), the testing laboratory is permitted, without being required to inform and obtain prior approval from DAkkS, the free choice of standard or equivalent testing methods. The listed testing methods are exemplary. The testing laboratory maintains a current list of all testing methods within the flexible scope of accreditation.. Abbreviations used: see last page This document is a translation. The definitive version is the original German annex to the accreditation certificate. 1/5

2 Hospital Hygiene / Microbial hygienic tests : Cultural methods* Standard / date of issue In-house method /version Title of the Standard or the in-house method (specify any deviations / modifications of standard method) PA / V02 Determination of vitality of biological indicators DIN EN ISO / and corrigendum USP <55> / 39 PA / V04 PA / V05 PA V01 Sterilization of health care products Biological indicators Part 1: General requirements Determination of viable count Determination of growth inhibition by carriers and primary packaging materials D value determination by the survivor curve method D value determination by the fraction negative method ing of Survival-kill response characteristics Biological Indicators resistance performance tests viable spore count Determination of D-values under ethylene oxide indicators for sterilization processes with ethylene oxide in compliance with DIN EN ISO or Ph. Eur Determination of D-values under saturated steam in compliance with DIN EN ISO or Ph. Eur Determination of z-values in compliance with DIN EN ISO and dry heat in compliance with DIN EN ISO Period of validity: to Translation - 2/5

3 Standard / date of issue In-house method /version PA / V03 PA / V07 PA / V05 PA / V04 PA / V02 Title of the Standard or the in-house method (specify any deviations / modifications of standard method) Determination of D-values for germs in suspensions in compliance with DIN EN ISO or Ph. Eur Determination of D-values under dry heat indicators for sterilization processes with dry heat in compliance with DIN EN ISO Determination of D-values under formaldehyde indicators for sterilization processes with low temperature steam formaldehyde in compliance with DIN EN ISO Determination of the spore population on solid carriers Determination of viable count in compliance with DIN EN ISO of solid carriers (various materials) inoculated with spore suspension Purity testing of biological indicators testing for microbiological contamination in different suspension media : Chemical tests* DIN EN ISO / Sterilization of health care products Chemical indicators Part 1: General requirements Color change performance in moist heat Color change performance in dry heat Color change performance in ethylene oxide Color change performance in low temperature steam formaldehyde Color change performance in hydrogen peroxide vapor ing for indicator color bleeding Chemical indicators Period of validity: to Translation - 3/5

4 DIN / 2011 PA V02 PA V02 PA V02 PA V04 PA V02 PA V02 PA V02 PA V02 Suitability test of a medical device simulator for steam Indicator systems, sterilization Medical device simulator testing process challenge, medical device simulators Determination of the relative reflectance density Chemical indicators Method to determine the color difference between substrate and indicator, in compliance with DIN EN ISO , annex A and DIN EN ISO , annex C Determination of the strength of the indicator Chemical indicators Determination of the strength of the indicator before and after steam sterilization, in compliance with DIN EN ISO , annex A and DIN EN ISO , annex A ing of chemical indicators for color transfer Chemical indicators Determination of transfer of indicator to standard test pack on processing, in compliance with DIN EN ISO , annex F Color change test of chemical indicators for steam Chemical indicators sterilization Method to determine color change performance in compliance with DIN EN ISO , section 6 and DIN EN ISO , section 6 Conformity test of a Bowie-Dick simulation test Chemical indicators, according to DIN EN ISO indicator systems Process for assessing performance requirements, uniform color change, equivalence to the Bowie-Dick test, the reproducibility of fail and the indicator color change on exposure to dry heat according to DIN EN ISO , section 6, annexes B, D, E, F, G, J, K, L Probing the dimensions of process challenge according to EN ing the compatibility of the device s materials according to EN Performance test of according to EN Performance test of process challenge for hollow body loads according to EN Indicator systems, Chemical indicators Period of validity: to Translation - 4/5

5 PA V02 PA V02 Checking the dimensions and materials of process challenge according to EN 1422 In compliance with EN 1422 and DIN EN 867-5, section 4.5 Suitability test of a BMS comparative assessment of indicators systems intended for monitoring validated processes., Indicator systems, monitoring systems Abbreviations used: BMS DIN EN Ph. Eur. ISO PA USP Batch Monitoring System Deutsches Institut für Normung e.v. (German Institute for Standardization, registered Society) europäische Norm (european standard) Pharmacopoeia Europaea International Organization for Standardization Prüfanweisung der SAL-GmbH (testing instruction of SAL-GmbH) United States Pharmacopeia Period of validity: to Translation - 5/5

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025: and the Directive 93/42/EEC 2 and 90/385/EEC 3

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025: and the Directive 93/42/EEC 2 and 90/385/EEC 3 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18398-02-02 according to DIN EN ISO/IEC 17025:2005 1 and the Directive 93/42/EEC 2 and 90/385/EEC 3 Period of validity: 26.02.2018

More information

Annex to the accreditation certificate D-PL according to DIN EN ISO/IEC 17025: and council directives 90/385/EWG 2 and 93/42/EWG 3

Annex to the accreditation certificate D-PL according to DIN EN ISO/IEC 17025: and council directives 90/385/EWG 2 and 93/42/EWG 3 Deutsche Akkreditierungsstelle GmbH Annex to the accreditation certificate D-PL-13422-01-02 according to DIN EN ISO/IEC 17025:2005 1 and council directives 90/385/EWG 2 and 93/42/EWG 3 Period of validity:

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025: and the Directive 93/42/EEC 2 and 90/385/EEC 3

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025: and the Directive 93/42/EEC 2 and 90/385/EEC 3 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-13412-01-02 according to DIN EN ISO/IEC 17025:2005 1 and the Directive 93/42/EEC 2 and 90/385/EEC 3 Indefinite since: 10.12.2018

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH German Accreditation Body Annex to the Accreditation Certificate D-PL-20591-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 14.08.2017 to 13.08.2022

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11057-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 20.06.2014 to 19.06.2019 Holder of certificate: OELCHECK

More information

Annex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 11238 01 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 09.02.2016 to 08.02.2021 Holder of certificate: ContiTech

More information

Accreditation. Deutsche Akkreditierungsstelle GmbH hereby confirms that the testing laboratory

Accreditation. Deutsche Akkreditierungsstelle GmbH hereby confirms that the testing laboratory Entrusted pursuant to 8 (1) of the German Accreditation Body Act (AkkStelleG) in conjunction with 1 (1) of the Regulation on the Entrustment of the Accreditation Body (AkkStelleGBV) Accreditation Deutsche

More information

Annex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 20281 01 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 31.08.2016 to 30.08.2021 Holder of certificate: Deutsche

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11272-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 18.10.2017 to 17.10.2022 Holder of certificate: VDZ

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17579-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 07.07.2017 to 06.07.2022 Holder of certificate: gammatest

More information

Annex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 11140 18 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 06.11.2014 to 05.11.2019 Holder of certificate: Fraunhofer

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11065-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 08.02.2016 to 07.02.2021 Holder of certificate: Actemium

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17435-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 06.12.2017 to 08.12.2018 Holder of certificate: k3works

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17435-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 30.09.2016 to 08.12.2018 Holder of certificate: k3works

More information

Annex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 18438 02 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 11.03.2014 to 10.03.2019 Holder of certificate: Jürgen

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-19722-01-00 according to DIN EN ISO/IEC 17025:2005 Holder of certificate: Institut für Lacke und Farben Magdeburg ggmbh Fichtestraße

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11125-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 31.07.2017 to 30.07.2022 Holder of certificate: DIN

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18869-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 30.08.2013 to 29.08.2018 Holder of certificate: ilf

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11109-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 13.06.2018 to 22.06.2020 Holder of certificate: TÜV

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17453-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 03.07.2017 to 02.07.2022 Holder of certificate: SPIE

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-20258-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 2016-02-02 to 2021-02-01 Holder of certificate: Amphenol-Tuchel

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate DPL110551000 according to DIN EN ISO/IEC 17025:2005 Period of validity: 20140612 to 20160711 Date of issue: 20140612 Holder of

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11035-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 13.02.2018 to 12.02.2023 Holder of certificate: DMT

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18137-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 19.03.2018 to 18.03.2023 Holder of certificate: Continental

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 eutsche Akkreditierungsstelle Gmb Annex to the Accreditation Certificate -PL-19399-01-00 according to IN EN ISO/IEC 17025:2005 ate of issue: 29.11.2018 older of certificate: Inspectorate eutschland Gmb

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17640-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 18.12.2017 to 04.11.2018 Holder of certificate: Haltermann

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18192-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 15.11.2017 to 14.11.2022 Holder of certificate: ITAP

More information

Period of validity: to Date of issue:

Period of validity: to Date of issue: Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11190-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 09.03.2017 to 02.02.2020 Holder of certificate: TÜV

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-12095-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 2015-07-16 to 2019-03-06 Holder of certificate: Weidmüller

More information

Accreditation. a'1" ul. ( oar.hl,.n" Deutsche Akkreditieru ngsstelle G m bh. Y,/.,n" r,nn" Head of Division

Accreditation. a'1 ul. ( oar.hl,.n Deutsche Akkreditieru ngsstelle G m bh. Y,/.,n r,nn Head of Division ( oar.hl,.n" Akkreditieru ngsstel le Deutsche Akkreditieru ngsstelle G m bh Entrusted according to Section 8 subsection 1 AkkStelleG in connection with Section 1 subsection 1 AkkStellecBV Signatory the

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-20575-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 2018-03-05 to 2021-07-28 Holder of certificate: innogy

More information

Test Report. CHTC JIAHUA NONWOVEN CO.,LTD No.99,WaGou New Village, Pengchang,Xiantao,Hubei, CHINA

Test Report. CHTC JIAHUA NONWOVEN CO.,LTD No.99,WaGou New Village, Pengchang,Xiantao,Hubei, CHINA Test Report Order No.: 832/2 Page of 6 Client : CHTC JIAHUA NONWOVEN CO.,LTD No.99,WaGou New Village, Pengchang,Xiantao,Hubei, CHINA Date of order: 5 May 28 Receipt of sample material: May 28 Origin of

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 11140-4 First edition 2001-05-01 Sterilization of health care products Chemical indicators Part 4: Class 2 indicators for steam penetration test packs Stérilisation des produits

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11321-02-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 20.12.2016 to 19.12.2021 Holder of certificate: TÜV

More information

Chemical Indicators (CI) for sterilization control Guide with Terms, Standards and Type identification Information updated: March 2017.

Chemical Indicators (CI) for sterilization control Guide with Terms, Standards and Type identification Information updated: March 2017. Chemical Indicators (CI) for sterilization control Guide with Terms, Standards and Type identification Information updated: March 2017. References to the standards mentioned DIN EN ISO 11140-1: General

More information

Chemical indicators and test devices Benchmarking sterilisation processes.

Chemical indicators and test devices Benchmarking sterilisation processes. Chemical indicators and test devices Benchmarking sterilisation processes www.stericlin.com Regulatory landscape National Law Directive / Regulation Guidelines Standards 2 Directive Regulation Law Guideline

More information

Sound-absorbing spacer Sorp10

Sound-absorbing spacer Sorp10 Sponsor: Reference number: 7.3 / 27080 This document is only a translated version; not legally attested Max Frank GmbH & Co. KG Mitterweg 1 94339 Leiblfing Federal Institute for Materials Research and

More information

DEUTSCHE NORM DIN Passverzahnungen mit Evolventenflanken und Bezugsdurchmesser Teil 2: Nennmaße und Prüfmaße

DEUTSCHE NORM DIN Passverzahnungen mit Evolventenflanken und Bezugsdurchmesser Teil 2: Nennmaße und Prüfmaße DEUTSCHE NORM DIN 5480-2 D May 2006 ICS 21.120.10 Supersedes: see below Involute splines based on reference s Part 2: and inspection s Passverzahnungen mit Evolventenflanken und Bezugsdurchmesser Teil

More information

Deutsche Akkreditierungsstelle GmbH

Deutsche Akkreditierungsstelle GmbH (( DAk~~"h' Akkreditierungsstelle Deutsche Akkreditierungsstelle GmbH Entrusted according to Section 8 subsection 1 AkkStelleG in connection with Section 1 subsection 1 AkkStelleGBV Signatory to the Multilateral

More information

Standards & News: Chemical Indicators. Jan Oort, Sales Director

Standards & News: Chemical Indicators. Jan Oort, Sales Director Standards & News: Chemical Indicators Jan Oort, Sales Director TOP 1: Chemical Indicators EN ISO 11140 Series: Part 1 (2015) News Former Class Now Type Type 1 to Type 6 have different applications and

More information

Sterilisering - Ångautoklaver - Stora autoklaver Sterilization - Steam sterilizers - Large sterilizers

Sterilisering - Ångautoklaver - Stora autoklaver Sterilization - Steam sterilizers - Large sterilizers Sterilisering - Ångautoklaver - Stora autoklaver Sterilization - Steam sterilizers - Large sterilizers Sterilization - Steam sterilizers Large sterilizers Sterilisering - Ångautoldaver - Stora autoldaver

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18436-01-01 according to DIN EN ISO/IEC 17025:2005 Period of validity: 22.01.2018 to 28.10.2019 Holder of certificate: ISP

More information

Josephus Paulus Clemens Maria van Doornmalen Gomez Hoyos. Dutch Norm Committee and Dutch delegate in EN TC 102 WG 2 Testing EN TC WG 3 Requirements

Josephus Paulus Clemens Maria van Doornmalen Gomez Hoyos. Dutch Norm Committee and Dutch delegate in EN TC 102 WG 2 Testing EN TC WG 3 Requirements Steam penetration Josephus Paulus Clemens Maria van Doornmalen Gomez Hoyos March 2012 Dutch Norm Committee and Dutch delegate in EN TC 102 WG 2 Testing EN TC WG 3 Requirements EN TC WG 5 Small steam sterilizers

More information

Annex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 19102 01 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 03.09.2013 to 02.09.2018 Holder of certificate: AUCOTEAM

More information

DÜRR NDT GmbH & CO. KG Höpfigheimer Straße Bietigheim-Bissingen

DÜRR NDT GmbH & CO. KG Höpfigheimer Straße Bietigheim-Bissingen Evaluation of the image quality of a radiographic film emulsion AGFA D7 exposed by X-rays and developed by machine processing (8 min cycle time at 29 C) using Dürr NDT XR D-6 NDT developer and XR F-6 NDT

More information

SVENSK STANDARD SS-EN 867-3

SVENSK STANDARD SS-EN 867-3 SVENSK STANDARD SS-EN 867-3 Handläggande organ Fastställd Utgåva Sida Hälso- och sjukvårdsstandardiseringen, HSS 1997-04-30 1 1 (1+18) SIS FASTSTÄLLER OCH UTGER SVENSK STANDARD SAMT SÄLJER NATIONELLA,

More information

DEUTSCHE NORM DIN 8077

DEUTSCHE NORM DIN 8077 DEUTSCHE NORM DIN 877 September 28 D ICS 23.4.2 Supersedes DIN 877:27-5 Polypropylene (PP) pipes PP-H, PP-B, PP-R, PP-RCT Dimensions Rohrus Polypropylen (PP) PP-H, PP-B, PP-R, PP-RCT Maße Normen-Download-Beuth-Türk

More information

The Deutsche Akkreditierungsstelle GmbH attests that the testing laboratory

The Deutsche Akkreditierungsstelle GmbH attests that the testing laboratory Deutsche GmbH Entrusted according to Section 8 subsection 1 AkkStelleG in connection with Section 1 subsection 1 AkkStelleGBV Signatory to the Multilateral Agreements of EA, ILAC and IAF for Mutual Recognition

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-19065-04-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 2017-05-11 to 2022-05-10 Date of issue: 2017-05-11

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18869-01-00 according to DIN EN ISO/IEC 17025:2005 Holder of certificate: ilf Forschungs- und Entwicklungsgesellschaft Lacke

More information

SVENSK STANDARD SS-EN 867-5

SVENSK STANDARD SS-EN 867-5 SVENSK STANDARD SS-EN 867-5 Fastställd 2001-09-14 Utgåva 1 Icke-biologiska system avsedda att användas i sterilisatorer Del 5: Specificering av indikatorsystem och provkroppar avsedda att användas i prestandaprovning

More information

DEUTSCHE NORM July 2004 DIN EN ISO 9038 { Test for sustained combustibility of liquids (ISO 9038 : 2002) English version of DIN EN ISO 9038

DEUTSCHE NORM July 2004 DIN EN ISO 9038 { Test for sustained combustibility of liquids (ISO 9038 : 2002) English version of DIN EN ISO 9038 DEUTSCHE NORM July 2004 DIN EN ISO 9038 { ICS 13.220.40; 87.040 Test for sustained combustibility of liquids (ISO 9038 : 2002) English version of DIN EN ISO 9038 Prüfung der Weiterbrennbarkeit von Flüssigkeiten

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-19065-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 2017-11-22 to 2022-11-21 Date of issue: 2017-11-22

More information

Hygiene certificate of the mobile shopping trolley cleaning system TROLLEY Wash all in one

Hygiene certificate of the mobile shopping trolley cleaning system TROLLEY Wash all in one Prof. Dr. R. Mutters Institut für Medizinische Mikrobiologie und Krankenhaushygiene Hans-Meerwein-Str. 2 35043 Marburg Prof. Dr. Mutters Institut Med. Mikrobiologie, Hans-Meerwein-Str. 2, D-35043 Marburg

More information

DEUTSCHE NORM January Fasteners Electroplated coatings (ISO 4042 : 1999) English version of DIN EN ISO 4042

DEUTSCHE NORM January Fasteners Electroplated coatings (ISO 4042 : 1999) English version of DIN EN ISO 4042 DEUTSCHE NORM January 2001 Fasteners Electroplated coatings (ISO 4042 : 1999) English version of DIN EN ISO 4042 { EN ISO 4042 ICS 21.060.01; 25.220.40 Verbindungselemente Galvanische Überzüge (ISO 4042

More information

Annex to the Accreditation Certificate D-K according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-K according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-K-15102-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 05.07.2017 to 04.07.2022 Date of issue: 05.07.2017

More information

DEUTSCHE NORM October Steels Determination of depth of decarburization (ISO 3887 : 2003) English version of DIN EN ISO 3887

DEUTSCHE NORM October Steels Determination of depth of decarburization (ISO 3887 : 2003) English version of DIN EN ISO 3887 DEUTSCHE NORM October 2003 Steels Determination of depth of decarburization (ISO 3887 : 2003) English version of DIN EN ISO 3887 { EN ISO 3887 ICS 77.040.99 Stahl Bestimmung der Entkohlungstiefe (ISO 3887

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 15490:2007 Ethanol as a blending component for petrol - Determination of phe Ethanol as a blending component for petrol - Determination of phe EESTI STANDARDIKESKUS EESTI STANDARDI

More information

Industry 4.0 Is Unthinkable Without Calibration!

Industry 4.0 Is Unthinkable Without Calibration! Industry 4.0 Is Unthinkable Without Calibration! Improved plant availability through regular sensor calibration The much-discussed Industry 4.0 cannot be implemented without a clear increase in automation

More information

DEUTSCHE NORM June Plastics Symbols and abbreviated terms Part 1: Basic polymers and their special characteristics (ISO : 2001)

DEUTSCHE NORM June Plastics Symbols and abbreviated terms Part 1: Basic polymers and their special characteristics (ISO : 2001) DEUTSCHE NORM June 2002 Plastics Symbols and abbreviated terms Part 1: Basic polymers and their special characteristics (ISO 1043-1 : 2001) English version of DIN EN ISO 1043-1 { EN ISO 1043-1 ICS 01.040.83;

More information

Annex to the Accreditation Certificate D-PL according to ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-20658-01-00 according to ISO/IEC 17025:2005 Period of validity: 13.06.2018 to 12.06.2023 Holder of certificate: IMAT Shenyang

More information

P-SRF V STERILE AIR PLEATED DEPTH FILTER ELEMENTS

P-SRF V STERILE AIR PLEATED DEPTH FILTER ELEMENTS P-SRF V STERILE AIR PLEATED DEPTH FILTER ELEMENTS Compressed Air & Process Filtration The P-SRF V filter element is a sterile grade, pleated depth filter element in a stainless-steel body. The improved

More information

ISO INTERNATIONAL STANDARD. Diesel engines NOx reduction agent AUS 32 Part 1: Quality requirements

ISO INTERNATIONAL STANDARD. Diesel engines NOx reduction agent AUS 32 Part 1: Quality requirements INTERNATIONAL STANDARD ISO 22241-1 First edition 2006-10-15 Diesel engines NOx reduction agent AUS 32 Part 1: Quality requirements Moteurs diesel Agent AUS 32 de réduction des NOx Partie 1: Exigences de

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 867-4:2001 Non-biological systems for use in sterilizers - Part 4: Specification for indicators as an alternative to the Bowie and Dick test for the detection of steam penetration

More information

DEUTSCHE NORM DIN EN 10080

DEUTSCHE NORM DIN EN 10080 DEUTSCHE NORM DIN EN 10080 August 2005 { ICS 77.140.15; 77.140.60; 77.140.65 Supersedes DIN V ENV 10080, August 1995 edition, parts of DIN 488-1, September 1984 edition, DIN 488-2, DIN 488-4 and DIN 488-6,

More information

DEUTSCHE NORM March Hexagon head bolts Product grade C (ISO 4016 : 1999) English version of DIN EN ISO 4016

DEUTSCHE NORM March Hexagon head bolts Product grade C (ISO 4016 : 1999) English version of DIN EN ISO 4016 DEUTSCHE NORM March 2001 Hexagon head bolts Product grade C (ISO 4016 : 1999) English version of DIN EN ISO 4016 { EN ISO 4016 ICS 21.060.10 Sechskantschrauben mit Schaft Produktklasse C (ISO 4016 : 1999)

More information

DEUTSCHE NORM May 2004 DIN EN ISO 4029 { Hexagon socket set screws with cup point (ISO 4029 : 2003) English version of DIN EN ISO 4029

DEUTSCHE NORM May 2004 DIN EN ISO 4029 { Hexagon socket set screws with cup point (ISO 4029 : 2003) English version of DIN EN ISO 4029 DEUTSCHE NORM May 2004 DIN EN ISO 4029 { ICS 21.060.10 Supersedes DIN 916, December 1980 edition. Hexagon socket set screws with cup point (ISO 4029 : 2003) English version of DIN EN ISO 4029 Gewindestifte

More information

TÜV RHEINLAND ENERGIE UND UMWELT GMBH. Report on the assessment of the antibacterial properties of AE DeCont rings with AGXX coating

TÜV RHEINLAND ENERGIE UND UMWELT GMBH. Report on the assessment of the antibacterial properties of AE DeCont rings with AGXX coating TÜV RHEINLAND ENERGIE UND UMWELT GMBH Report on the assessment of the antibacterial properties of AE DeCont rings with AGXX coating TÜV report no.: 931/21229709/100 Cologne, 1 October 2015 AE DeCont rings

More information

Part 1: Specifications for pipes, fittings and the system English version of DIN EN

Part 1: Specifications for pipes, fittings and the system English version of DIN EN DEUTSCHE NORM December 1999 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure Unplasticized poly(vinyl chloride) (PVC-U) Part 1: Specifications

More information

EBI 12 The new data logger generation

EBI 12 The new data logger generation EBI 12 The new data logger generation 3 EBI 12 The new data logger generation High quality stainless steel housing Application range from -90 C to 150 C High temperature accuracy up to 0.05 C Extended

More information

INTERNATIONAL PERMEATION MEASUREMENT STANDARDS

INTERNATIONAL PERMEATION MEASUREMENT STANDARDS INTERNATIONAL PERMEATION MEASUREMENT STANDARDS Area Sales Manager - Europe Permeation Testing Systems MOCON GmbH Standardisation organisations ASTM: ASTM International, formerly known as American Society

More information

ISO INTERNATIONAL STANDARD. Diesel engines NOx reduction agent AUS 32 Part 1: Quality requirements

ISO INTERNATIONAL STANDARD. Diesel engines NOx reduction agent AUS 32 Part 1: Quality requirements INTERNATIONAL STANDARD ISO 22241-1 First edition 2006-10-15 Diesel engines NOx reduction agent AUS 32 Part 1: Quality requirements Moteurs diesel Agent AUS 32 de réduction des NOx Partie 1: Exigences de

More information

Process Monitoring of Steam Steriliza3on Regula3ons & Use of Chemical and Biological Indicators

Process Monitoring of Steam Steriliza3on Regula3ons & Use of Chemical and Biological Indicators Process Monitoring of Steam Steriliza3on Regula3ons & Use of Chemical and Biological Indicators Richard Bancro,, B.Sc (Hons) Development and Technical Service Director Albert Browne Ltd A subsidiary of

More information

Price List 2013 In-House Repairs and Calibration

Price List 2013 In-House Repairs and Calibration In-House Repairs and Calibration Contents Page 2: Services Page 3: Repair and Certification Packages for Accumulators Page 4: Repair packages for Compact Hydraulics Power Units Page 5: Repair and Inspection

More information

<800> Hazardous Drugs Handling in Healthcare Settings. Jeanne Sun, PharmD

<800> Hazardous Drugs Handling in Healthcare Settings. Jeanne Sun, PharmD Hazardous Drugs Handling in Healthcare Settings Jeanne Sun, PharmD Purpose of Approximately 8 million healthcare workers in the United States are potentially exposed to hazardous drugs (HDs)

More information

SVENSK STANDARD SS-EN 867-4

SVENSK STANDARD SS-EN 867-4 SVENSK STANDARD SS-EN 867-4 Handläggande organ Fastställd Utgåva Sida Hälso- och sjukvårdsstandardiseringen, HSS 2000-12-01 1 1 (1+37) Copyright SIS. Reproduction in any form without permission is prohibited.

More information

DEUTSCHE NORM June 2006 DIN EN { ICS Supersedes DIN EN : See start of validity

DEUTSCHE NORM June 2006 DIN EN { ICS Supersedes DIN EN : See start of validity DEUTSCHE NORM June 2006 DIN EN 14399-6 { ICS 21.060.30 Supersedes DIN EN 14399-6:2005-06 See start of validity High-strength structural bolting assemblies for preloading Part 6: Plain chamfered washers

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11068-09-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 10.07.2014 to 09.07.2019 Holder of certificate: Karlsruher

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12092:2002 Adhesives - Determination of viscosity Adhesives - Determination of viscosity EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard EVS-EN

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 14522:2005 Gaaside ja aurude isesüttimistemperatuuri määramine Determination of the auto ignition temperature of gases and vapours EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL

More information

Chemical disinfectants and antiseptics - Hygienic handwash - Test method and requirements (phase 2/step 2)

Chemical disinfectants and antiseptics - Hygienic handwash - Test method and requirements (phase 2/step 2) Irish Standard Chemical disinfectants and antiseptics - Hygienic handwash - Test method and requirements (phase 2/step 2) CEN 2013 No copying without NSAI permission except as permitted by copyright law.

More information

POLYMED CATALOGUE 2013 POLYCARBONATE STOPCOCKS MANIFOLDS - CONNECTORS

POLYMED CATALOGUE 2013 POLYCARBONATE STOPCOCKS MANIFOLDS - CONNECTORS CATALOGUE 2013 POLYCARBONATE STOPCOCKS MANIFOLDS - CONNECTORS General Information COMPLIANCE PRODUCT The Luer taper fittings are conform to standard ISO 594-1 for syringes, needles and other medical devices.

More information

Test Report. on Type Testing of Diaphragm Gland Seal Valves Type RWH-03 according to EN ISO 10297:2014

Test Report. on Type Testing of Diaphragm Gland Seal Valves Type RWH-03 according to EN ISO 10297:2014 HBAM Test Report Bundesanstalt für Materialforschung und -prüfung on Type Testing of Diaphragm Gland Seal Valves Type RWH-03 according to EN ISO 10297:2014 Reference 2-1478/2015 DGA reference DGA-14-068

More information

DEUTSCHE NORM October Structural steel equal and unequal leg angles Part 1: Dimensions English version of DIN EN

DEUTSCHE NORM October Structural steel equal and unequal leg angles Part 1: Dimensions English version of DIN EN DEUTSCHE NORM October 1998 Structural steel equal and unequal leg angles Part 1: Dimensions English version of DIN EN 10056-1 { EN 10056-1 ICS 77.140.70 Descriptors: Structural steel, angles, dimensions.

More information

SVENSK STANDARD SS-EN 15490:2007. Etanol som blandningskomponent i bensin Bestämning av phe

SVENSK STANDARD SS-EN 15490:2007. Etanol som blandningskomponent i bensin Bestämning av phe SVENSK STANDARD SS-EN 15490:2007 Fastställd 2007-09-03 Utgåva 1 Etanol som blandningskomponent i bensin Bestämning av phe Ethanol as a blending component for petrol Determination of phe ICS 71.080.60;

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-28107-6 EN 1008:2002 SOUTH AFRICAN NATIONAL STANDARD Mixing water for concrete Specification for sampling, testing and assessing the suitability of water, including water recovered from

More information

Inspection Report. Coating name: IGP HWFclassic IGP Pulvertechnik AG Industrie Stelz, Ringstraße Wil Schweiz. Job number:

Inspection Report. Coating name: IGP HWFclassic IGP Pulvertechnik AG Industrie Stelz, Ringstraße Wil Schweiz. Job number: Inspection Report Referred to: AAMA 2604-13, Voluntary Specification, Performance Requirements and Test Procedures for High Performance Organic Coatings on Aluminium Extrusions and Panels Coating name:

More information

DOWNLOAD OR READ : EN ISO 105 B06 XNCQAY PDF EBOOK EPUB MOBI

DOWNLOAD OR READ : EN ISO 105 B06 XNCQAY PDF EBOOK EPUB MOBI DOWNLOAD OR READ : EN ISO 105 B06 XNCQAY PDF EBOOK EPUB MOBI Page 1 Page 2 en iso 105 b06 xncqay en iso 105 b06 pdf en iso 105 b06 xncqay en. Format Language; std 1 88: PDF std 2 88: Paper CHF 88; Buy

More information

This document is a preview generated by EVS

This document is a preview generated by EVS CEN WORKSHOP CWA 15375 August 2005 AGREEMENT ICS 47.020.30 English version Separators for marine residual fuel - Performance testing using specific test oil This CEN Workshop Agreement has been drafted

More information

DEUTSCHE NORM February 2005 DIN EN ISO 1514 { Paints and varnishes Standard panels for testing (ISO 1514 : 2004) English version of DIN EN ISO 1514

DEUTSCHE NORM February 2005 DIN EN ISO 1514 { Paints and varnishes Standard panels for testing (ISO 1514 : 2004) English version of DIN EN ISO 1514 DEUTSCHE NORM February 2005 DIN EN ISO 1514 { ICS 87.100 Supersedes September 1997 edition. Paints and varnishes Standard panels for testing (ISO 1514 : 2004) English version of DIN EN ISO 1514 Beschichtungsstoffe

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EUROPEAN PRESTANDARD PRÉNORME EUROPÉENNE EUROPÄISCHE VORNORM ENV 807 May 2001 ICS 71.100.50 Supersedes ENV 807:1993 English version Wood preservatives - Determination of the effectiveness against soft

More information

Practice Note on the Sourcing of Threaded Rod Used for Foundation Bolts

Practice Note on the Sourcing of Threaded Rod Used for Foundation Bolts MATERIALS Practice Note on the Sourcing of Threaded Rod Used for Foundation Bolts Authors: Kevin Cowie, Alistair Fussell Affiliation: Steel Construction New Zealand Inc. Date: 20 th February 2018 Ref.:

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 8178-2 Second edition 2008-04-15 Reciprocating internal combustion engines Exhaust emission measurement Part 2: Measurement of gaseous and particulate exhaust emissions under

More information

Contamination Recovery Rate Using Statistical Process Control. Sean Toler

Contamination Recovery Rate Using Statistical Process Control. Sean Toler Contamination Recovery Rate Using Statistical Process Control Sean Toler October 5, 2017 Statisitics and Microbiology Challenges On Data Sets Cleanroom microbiology testing results have a majority of samples

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 14832:2005 Petroleum and related products - Determination of the oxidation stability and corrosivity of fire-resistant phosphate ester fluids Petroleum and related products - Determination

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 13652:2002 Soil improvers and growing media - Extraction of water soluble nutrients and elements Soil improvers and growing media - Extraction of water soluble nutrients and elements

More information

ISO INTERNATIONAL STANDARD. Road vehicles Roof load carriers Part 4: Magnetic fixing devices

ISO INTERNATIONAL STANDARD. Road vehicles Roof load carriers Part 4: Magnetic fixing devices INTERNATIONAL STANDARD ISO 11154-4 First edition 2004-10-15 Road vehicles Roof load carriers Part 4: Magnetic fixing devices Véhicules routiers Dispositifs porte-charges de toit Partie 4: Dispositifs à

More information

ISO INTERNATIONAL STANDARD. Diesel engines NOx reduction agent AUS 32 Part 1: Quality requirements

ISO INTERNATIONAL STANDARD. Diesel engines NOx reduction agent AUS 32 Part 1: Quality requirements INTERNATIONAL STANDARD ISO 22241-1 First edition 2006-10-15 Diesel engines NOx reduction agent AUS 32 Part 1: Quality requirements Moteurs diesel Agent AUS 32 de réduction des NOx Partie 1: Exigences de

More information

DEUTSCHE NORM February 2003

DEUTSCHE NORM February 2003 DEUTSCHE NORM February 2003 Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylenediene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)- styrene (ACS) moulding and extrusion

More information

Prüffeld der Schaltwerke

Prüffeld der Schaltwerke Prüffeld der Schaltwerke Report No.: 16-051-MH Sheet: 2 Notes 1. The testing station of the Siemens switchgear factory (Prüffeld der Schaltwerke),, Berlin, has been approved by the DAkkS (German accreditation

More information