Annex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005
|
|
- Susanna Jacobs
- 5 years ago
- Views:
Transcription
1 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005 Period of validity: to Holder of certificate: Deutsche Ölwerke Lubmin GmbH Freesendorfer Weg 4, Lubmin Tests in the fields: Chemical and physical chemical testing of mineral oil and related products; Selected properties of lubricants such as engine oils, gear oils and hydraulic oils Abbreviations used: see last page 1. Automotive Oils Density at 15 C DIN EN ISO Crude petroleum and petroleum products Determination of density Oscillating U tube method Kinematic Viscosity at 40 C and 100 C E DIN This document is a translation. The definitive version is the original German annex to the accreditation certificate. 1/7
2 HTHS Viscosity ASTM D Standard Test Method for Measuring Apparent Viscosity at High Temperature and High Shear Rate by Multicell Capillary Viscometer CSS Viskosity (Apparent Viscosity) ASTM D 5293 Standard Test Method for Apparent Viscosity of Engine Oils between 5 C and 30 C using the Cold Cranking Simulator Viscosity Index DIN ISO Petroleum products Calculation of viscosity index from kinematic viscosity Evaporation Loss ASTM D Standard Test Method for Evaporation Loss of Lubricating Oil by the Noack Method Flash Point (COC) DIN EN ISO Petroleum products Determination of flash and fire points Cleveland open cup method Pour Point ASTM D 7346 Standard Test Method for No Flow Point and Pour Point of Petroleum Products and Liquid Fuels Colour DIN ISO Petroleum products Determination of colour (ASTM scale) IR Spectrum DIN Testing of petroleum products and related products Analysis by infrared spectrometry General working principles Period of validity: to Translation 2/7
3 Total Base Number ASTM D 2896 Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration ASTM D 4927 Additive Elements Standard Test Method for Elemental Analysis of Lubricant and Additive Components Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength Dispersive X Ray Fluorescene Spectroscopy MRV Viscosity ASTM D 4684 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature Sulfated Ash DIN Testing of mineral oils Determination of sulfated ash Gear Oils Density at 15 C DIN EN ISO Crude petroleum and petroleum products Determination of density Oscillating U tube method Kinematic Viscosity at 40 C and 100 C E DIN Period of validity: to Translation 3/7
4 Viscosity Index DIN ISO Petroleum products Calculation of viscosity index from kinematic viscosity ASTM D Evaporation Loss Standard Test Method for Evaporation Loss of Lubricating Oil by the Noack Method Flash Point (COC) DIN EN ISO Petroleum products Determination of flash and fire points Cleveland open cup method Pour Point ASTM D 7346 Standard Test Method for No Flow Point and Pour Point of Petroleum Products and Liquid Fuels Colour DIN ISO Petroleum products Determination of colour (ASTM scale) DIN IR Spectrum Testing of petroleum products and related products Analysis by infrared spectrometry General working principles ASTM D 4927 Additive Elements Standard Test Method for Elemental Analysis of Lubricant and Additive Components Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength Dispersive X Ray Fluorescene Spectroscopy Sulfated Ash DIN Testing of mineral oils Determination of sulfated ash Period of validity: to Translation 4/7
5 Brookfield Viscometry ASTM D Standard Test Method for Low Temperature Viscosity of Lubricants Measured by Brookfield Viscometer Hydraulic oils (HL, HLP, HVLP) Density at 15 C DIN EN ISO Crude petroleum and petroleum products Determination of density Oscillating U tube method Kinematic Viscosity at 100 C E DIN Kinematic Viscosity at 40 C E DIN DIN ISO Viscosity Index Petroleum products Calculation of viscosity index from kinematic viscosity Period of validity: to Translation 5/7
6 Evaporation Loss ASTM D Standard Test Method for Evaporation Loss of Lubricating Oil by the Noack Method DIN EN ISO Flash Point Petroleum products Determination of flash and fire points Cleveland open cup method ASTM D 7346 Pour Point Standard Test Method for No Flow Point and Pour Point of Petroleum Products and Liquid Fuels DIN ISO Colour Petroleum products Determination of colour (ASTM scale) DIN IR Spectrum Testing of petroleum products and related products Analysis by infrared spectrometry General working principles ASTM D 4927 Additive Elements Standard Test Method for Elemental Analysis of Lubricant and Additive Components Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength Dispersive X Ray Fluorescene Spectroscopy DIN Sulfated Ash Testing of mineral oils Determination of sulfated ash Period of validity: to Translation 6/7
7 Abbreviations used: ASTM DIN E DIN EN ISO Process Matrix Number+) American Society for Testing and Materials Deutsches Institut für Normung e.v. Deutsches Institut für Normung e.v. (draft standard) European Standard International Organization for Standardization Number of the characteristics within the Process Matrix for Mineral Oel (72 FB Version 1.1, October ) Period of validity: to Translation 7/7
Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH German Accreditation Body Annex to the Accreditation Certificate D-PL-20591-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 14.08.2017 to 13.08.2022
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18436-01-01 according to DIN EN ISO/IEC 17025:2005 Period of validity: 22.01.2018 to 28.10.2019 Holder of certificate: ISP
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11057-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 20.06.2014 to 19.06.2019 Holder of certificate: OELCHECK
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17640-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 18.12.2017 to 04.11.2018 Holder of certificate: Haltermann
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL18398-02-01 according to DIN EN ISO/IEC 17025:2005 Period of validity: 26.02.2018 to 25.02.2023 Holder of certificate: SAL
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SOUTHWEST RESEARCH INSTITUTE Office of Automotive Engineering Fuels and Lubricants Research Division 6220 Culebra Road, P.O. Drawer 28510 San Antonio, TX 78228-0510
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SOUTHWEST RESEARCH INSTITUTE Office of Automotive Engineering Fuels and Lubricants Research Division 6220 Culebra Road, P.O. Drawer 28510 San Antonio, TX 78228-0510
More informationParagon Scientific Ltd Proficiency Testing Scheme Schedule
Paragon Scientific Ltd Proficiency Testing Scheme Schedule Proficiency Testing Scheme Schedule Page 1 of 16 Issue : 29/01/2015 Print : 25/06/2018 Viscosity ASTM D445 - Standard Test Method for Kinematic
More informationISBN SANS 342:2006 Edition 4 SOUTH AFRICAN NATIONAL STANDARD Automotive diesel fuel Published by Standards South Africa 1 dr lategan roa
ISBN 0-626-18752-4 SOUTH AFRICAN NATIONAL STANDARD Automotive diesel fuel Published by Standards South Africa 1 dr lategan road groenkloof private bag x191 pretoria 0001 tel: 012 428 7911 fax: 012 344
More informationSCOPE OF ACCREDITATION
Standards Council of Canada 600-55 Metcalfe Street Ottawa, ON K1P 6L5 Canada Conseil canadien des normes 55, rue Metcalfe, bureau 600 Ottawa, ON K1P 6L5 Canada SCOPE OF ACCREDITATION InnoTech Alberta Inc.
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service High Street, Feltham, Middlesex, TW13 4UN, UK
Unit A Shears Way Brooklands Close Sunbury-on-Thames Middlesex TW16 7EE Contact: Mr Craig Stone Tel: +44 (0)1932 732103 Fax: +44 (0)1932 732113 E-Mail: craig.stone@intertek.com Website: SUMMARY OF ACCREDITATION
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11125-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 31.07.2017 to 30.07.2022 Holder of certificate: DIN
More informationAnnex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 18438 02 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 11.03.2014 to 10.03.2019 Holder of certificate: Jürgen
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
eutsche Akkreditierungsstelle Gmb Annex to the Accreditation Certificate -PL-19399-01-00 according to IN EN ISO/IEC 17025:2005 ate of issue: 29.11.2018 older of certificate: Inspectorate eutschland Gmb
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11272-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 18.10.2017 to 17.10.2022 Holder of certificate: VDZ
More informationAnnex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 11140 18 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 06.11.2014 to 05.11.2019 Holder of certificate: Fraunhofer
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17579-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 07.07.2017 to 06.07.2022 Holder of certificate: gammatest
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that EPA National Vehicle and Fuel Emissions Laboratory
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-20575-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 2018-03-05 to 2021-07-28 Holder of certificate: innogy
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 LABORATORY SERVICES, PETROTRIN Southern Main Road Pointe-A-Pierre, Trinidad, Trinidad & Tobago Peter Bhim Phone: 868 658 4200 CHEMICAL Valid To: November 30,
More informationAnnex no. 1 of Accreditation Certificate no. LI 333 from
Valid from 04.02.2008 to 04.02.2012 Oil Products Laboratory DJ No. 226, Nvodari, Constana county belonging to SC ROMPETROL QUALITY CONTROL SRL 1 2 3 4 Physical tests 1. Determination of the density with
More informationViscosity & Flash Point Standards For Reference, Validation, and Calibration
For Reference, Validation, and Calibration Since 1938 CANNON Instrument Company has been a leader in viscosity measurement. We provide a broad range of viscosity standards and flash point reference materials
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17435-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 06.12.2017 to 08.12.2018 Holder of certificate: k3works
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17435-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 30.09.2016 to 08.12.2018 Holder of certificate: k3works
More informationAnnex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 11238 01 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 09.02.2016 to 08.02.2021 Holder of certificate: ContiTech
More informationISO Petroleum products Fuels (class F) Specifications of marine fuels
INTERNATIONAL STANDARD ISO 8217 Fifth edition 2012-08-15 Petroleum products Fuels (class F) Specifications of marine fuels Produits pétroliers Combustibles (classe F) Spécifications des combustibles pour
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationScope of testing. State: March Contents: siemens.com/energy
Scope of testing State: March 2017 Siemens AG - Material testing laboratory Nuremberg Contents: 1. Our services 2. Quality assurance 3. Sampling and bottles 4. Scope of testing of material testing laboratory
More informationCoefficient of Friction of Lubricants D 5707 p. 69 Coking Value D 4715 p. 70 Cold Cranking Simulator Manual Method D 2602 p. 71 Automatic Method--see
Introduction p. 1 Explanation of Terms p. 2 Test Method Equivalence p. 3 Alphanumeric Index of Standards p. 5 Acid Number Colorimetric Titration--see also Base Number, p. 43 D 974 p. 11 Potentiometric
More informationGB Translated English of Chinese Standard: GB NATIONAL STANDARD
Translated English of Chinese Standard: GB18351-2015 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 75.160.20 E 31 GB 18351-2015 Replacing
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 0-626-18752-4 SANS 342:2006 SOUTH AFRICAN NATIONAL STANDARD Automotive diesel fuel Published by Standards South Africa 1 dr lategan road groenkloof private bag x191 pretoria 0001 tel: 012 428 7911
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18869-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 30.08.2013 to 29.08.2018 Holder of certificate: ilf
More informationGB Translated English of Chinese Standard: GB NATIONAL STANDARD OF THE
Translated English of Chinese Standard: GB17930-2013 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 75.160.20 E 31 GB 17930-2013 Replacing
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17043:2010. ASTM INTERNATIONAL 100 Barr Harbor Drive West Conshohocken, PA Amy Meacock
SCOPE OF ACCREDITATION TO ISO/IEC 17043:2010 ASTM INTERNATIONAL 100 Barr Harbor Drive West Conshohocken, PA 19428 Amy Meacock 610 832 9688 PROFICIENCY TESTING PROVIDER Valid To: May 31, 2021 Certificate
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK SGS West Thurrock Laboratory Contact: David Mercer (Laboratory Manager) 859 London Road Tel: +44 (0)1708 681943 West Thurrock Fax: +44 (0)1708
More informationStandard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion
IAS Accreditation Number Company Name Address Contact Name Telephone +966-14-398-2118 Effective Date of Scope May 1, 2018 Accreditation Standard ISO/IEC 17025:2017 TL-743 Yanbu Industrial Area Yanbu, Madina
More informationOIL PT. Scheme Description. Oils and Fuels Analysis Proficiency Testing Scheme
OIL PT Oils and Fuels Analysis Proficiency Testing Scheme Scheme Description LGC Standards Proficiency Testing 1 Chamberhall Business Park Chamberhall Green Bury, BL9 0AP UK. Telephone: +44 (0) 161 762
More informationISO INTERNATIONAL STANDARD
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 11158 Second edition 2009-09-15 Corrected version 2009-12-01 Lubricants, industrial oils and related products (class L) Family H (hydraulic systems)
More informationISO 8217 INTERNATIONAL STANDARD. Petroleum products Fuels (class F) Specifications of marine fuels
INTERNATIONAL STANDARD ISO 8217 Fourth edition 2010-06-15 Petroleum products Fuels (class F) Specifications of marine fuels Produits pétroliers Combustibles (classe F) Spécifications des combustibles pour
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-19722-01-00 according to DIN EN ISO/IEC 17025:2005 Holder of certificate: Institut für Lacke und Farben Magdeburg ggmbh Fichtestraße
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11065-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 08.02.2016 to 07.02.2021 Holder of certificate: Actemium
More informationViscosity & Flash Point Standards For Reference, Validation, and Calibration
& Flash Point s For Reference, Validation, and Calibration Since 1938 CANNON Instrument Company has been a leader in viscosity measurement. We provide a broad range of viscosity standards and flash point
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60296 Third edition 2003-11 Fluids for electrotechnical applications Unused mineral insulating oils for transformers and switchgear IEC 2003 Copyright - all rights reserved No
More informationISO 8217 INTERNATIONAL STANDARD. Petroleum products Fuels (class F) Specifications of marine fuels
INTERNATIONAL STANDARD ISO 8217 Third edition 2005-11-01 Petroleum products Fuels (class F) Specifications of marine fuels Produits pétroliers Combustibles (classe F) Spécifications des combustibles pour
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025: and the Directive 93/42/EEC 2 and 90/385/EEC 3
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18398-02-02 according to DIN EN ISO/IEC 17025:2005 1 and the Directive 93/42/EEC 2 and 90/385/EEC 3 Period of validity: 26.02.2018
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17453-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 03.07.2017 to 02.07.2022 Holder of certificate: SPIE
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 6 Prenton Way Contact: Dr J Roberts North Cheshire Trading Estate Tel: +44 (0)151 649 9955 Prenton Fax: +44 (0)151 649 9977 Wirral E-Mail:
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12092:2002 Adhesives - Determination of viscosity Adhesives - Determination of viscosity EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard EVS-EN
More information1.1 Unless otherwise stated, the specification references and test methods are from the latest version in effect at the time of this contract.
(Page 1 of 6) LUBRICATING PRODUCTS MGS-92-12K 1.0 DESCRIPTION. This specification covers motor vehicle lubricating products for delivery in prepackaged containers such as drums, pails, etc., or for delivery
More informationAccreditation. Deutsche Akkreditierungsstelle GmbH hereby confirms that the testing laboratory
Entrusted pursuant to 8 (1) of the German Accreditation Body Act (AkkStelleG) in conjunction with 1 (1) of the Regulation on the Entrustment of the Accreditation Body (AkkStelleGBV) Accreditation Deutsche
More informationPRODUCT INFORMATION RENOLIN DTA. Lubricating and hydraulic oils. Description. Advantages. Application. Specifications
Description Hydraulic and lubricating oils made from selected base oils with additives to improve ageing stability and corrosion protection. The products in the RENOLIN DTA series are hydraulic and lubricating
More information10.6 Schedule of Accreditation
GEO-CHEM Middle East Laboratory No. ATL0015 is accredited by the GCC Accreditation Center () in accordance with the recognised International Standard, General requirements for the competence of testing
More information10.6 Scope of Accreditation
GEO-CHEM Middle East Laboratory No. ATL0015 is accredited by the GCC Accreditation Center () in accordance with the recognised International Standard, General requirements for the competence of testing
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025: and the Directive 93/42/EEC 2 and 90/385/EEC 3
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-13412-01-02 according to DIN EN ISO/IEC 17025:2005 1 and the Directive 93/42/EEC 2 and 90/385/EEC 3 Indefinite since: 10.12.2018
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18192-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 15.11.2017 to 14.11.2022 Holder of certificate: ITAP
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-20258-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 2016-02-02 to 2021-02-01 Holder of certificate: Amphenol-Tuchel
More informationHAVOLINE PRODS FULL SYNTHETIC MOTOR OIL
HAVOLINE PRODS FULL SYNTHETIC MOTOR OIL SAE 5W-40, Euro 5W-40 PRODUCT DESCRIPTION Fully synthetic motor oils formulated to provide exceptional wear protection in hot or cold operating temperatures. They
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18137-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 19.03.2018 to 18.03.2023 Holder of certificate: Continental
More informationRENOSAFE FireProtect 46, 68 Fire resistant hydraulic fluid, based on new ester and additive technology, Type HFDU
Description RENOSAFE FireProtect products are fire resistant hydraulic fluids based on special synthetic esters. The selected organic ester base oils have highest purity and show high oxidation and thermal
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11321-02-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 20.12.2016 to 19.12.2021 Holder of certificate: TÜV
More informationNeutral Oils : 60R, 110RVL, 100R, 150R, 220R, 600R
Neutral Oils : 60R, 1RVL, 0R, 150R, 220R, 600R (80) Neutral Oils are all-hydroprocessed, / II+ paraffinic base oils that can be used in blending in a variety of lubricant and process oils. Application
More informationFREQUENTLY ASKED QUESTIONS (FAQs)
FREQUENTLY ASKED QUESTIONS (FAQs) What are the Petrochemicals? Any chemical derived from crude oil,crude products or natural gas. Where the petrochemicals are used? In the manufacture of Synthetic rubber,
More informationCertificate of Accreditation
Certificate of Accreditation ISO/IEC 17025:2005 Certificate Number L2264.03 Analysts, Inc. 2450 Hassell Road Hoffman Estates IL 60195 has met the requirements set forth in L-A-B s policies and procedures,
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11109-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 13.06.2018 to 22.06.2020 Holder of certificate: TÜV
More informationPASSENGER CAR MOTOR OILS
PASSENGER CAR MOTOR OILS FULL SYNTHETIC OEMs continue to evolve engine designs that demand more from motor oil. One brand has evolved right alongside MAG 1. MAG 1 with FMX Technology provides unsurpassed
More information2-CYCLE, SMALL ENGINE, MOTORCYCLE & MARINE VEHICLES
2-CYCLE, SMALL ENGINE, MOTORCYCLE & MARINE VEHICLES 2-CYCLE CLAIMS PACK SIZES Universal * 12/2.6 Ounces 60179 12/8 Ounces 60138 Synthetic Universal * 12/2.6 Ounces 63119 Synthetic Blend with Fuel Stabilizer*
More informationHEAVY DUTY DIESEL ENGINE OILS
HEAVY DUTY DIESEL ENGINE OILS FULL SYNTHETIC MAG 1 Full Heavy Duty Diesel Engine Oil is designed to provide the highest levels of protection and performance from our most advanced technology and formulations.
More informationAnnex to the accreditation certificate D-PL according to DIN EN ISO/IEC 17025: and council directives 90/385/EWG 2 and 93/42/EWG 3
Deutsche Akkreditierungsstelle GmbH Annex to the accreditation certificate D-PL-13422-01-02 according to DIN EN ISO/IEC 17025:2005 1 and council directives 90/385/EWG 2 and 93/42/EWG 3 Period of validity:
More information2-CYCLE, SMALL ENGINE, MOTORCYCLE & MARINE VEHICLES
2-CYCLE, SMALL ENGINE, MOTORCYCLE & MARINE VEHICLES 2-CYCLE CLAIMS PACK SIZES Universal * 12/2.6 Ounces 60179 12/8 Ounces 60138 Synthetic Universal * 12/2.6 Ounces 63119 Synthetic Blend with Fuel Stabilizer
More informationSavant Labs Laboratory Testing Services. Tests by Method
ASTM D86 Distillation 400 ml ASTM D92 Fire Point, Cleveland Open Cup 250 ml ASTM D92 Flash Point and Fire Point, Cleveland Open Cup 250 ml ASTM D92 Flash Point, Cleveland Open Cup 250 ml ASTM D93 Flash
More informationGB Translated English of Chinese Standard: GB NATIONAL STANDARD
Translated English of Chinese Standard: GB17930-2016 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 75.160.20 E 31 GB 17930-2016 Replacing
More informationAPI Engine Oil Licensing and Certification System (EOLCS) Licensees API Lubricants Group Other Interested Parties
Kevin Ferrick Sr. Manager, Engine Oil Licensing and Certification System Global Industry Services 1220 L Street, NW Washington, DC 20005-4070 USA Telephone 1-202-682-8233 Fax 1-202-962-4739 Email ferrick@api.org
More informationIndex 1. ISO 8217 :
Index 1. ISO 8217 : 2010... 2 a. MARINE DISTILLATE FUELS... 2 b. MARINE RESIDUAL FUELS...3 2. ISO 8217 : 2005... 4 a. MARINE DISTILLATE FUELS... 4 b. MARINE RESIDUAL FUELS Grades 30, 80, 180 mm 2 /s (cst)...
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-33225-9 SOUTH AFRICAN NATIONAL STANDARD Automotive fuels Requirements and test methods for diesel WARNING This document references other documents normatively. Published by SABS Standards
More informationPERFORMANCE SPECIFICATION LUBRICATING OIL, SHIPBOARD INTERNAL COMBUSTION ENGINE, HIGH-OUTPUT DIESEL
METRIC MIL-PRF-9000J(SH) 07 January 2010 SUPERSEDING MIL-PRF-9000H(SH) 16 September 1987 PERFORMANCE SPECIFICATION LUBRICATING OIL, SHIPBOARD INTERNAL COMBUSTION ENGINE, HIGH-OUTPUT DIESEL This specification
More informationRENOLIN Xtreme Temp Plus
Description The RENOLIN Xtreme Temp Plus series was developed for hydraulic systems which are working in a wide temperature range. RENOLIN Xtreme Temp Plus is based on selected semi-synthetic base oils
More informationTest Methods & Procedures Spec Numbers Description
METHODS & PROCEDURES Test Methods & Procedures Test Methods & Procedures Spec Numbers Description Air Release Value Minutes to 0.2% air @ 50 Aniline Point Anti-Wear Vane Pump Test 250 hours, 140 bar @
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate DPL110551000 according to DIN EN ISO/IEC 17025:2005 Period of validity: 20140612 to 20160711 Date of issue: 20140612 Holder of
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 15380 Third edition 2016-12-01 Lubricants, industrial oils and related products (class L) Family H (Hydraulic systems) Specifications for hydraulic fluids in categories HETG,
More informationLOW TEMPERATURE OPERABILITY STARTABILITY & CHARACTERISTICS
ENGINE OIL TESTS LOW TEMPERATURE OPERABILITY STARTABILITY & CHARACTERISTICS The ability of an engine oil to flow or be pumped at low temperatures especially at start up is critical to the life of an engine.
More informationFuel oils Specification
TANZANIA STANDARD CDC15 (4029)P3 (Rev. of TZS 673:2014) Fuel oils Specification 0 Foreword This Tanzania Standard was prepared under the direction of Petroleum and Petroleum Products Technical committee,
More informationPASSENGER CAR MOTOR OILS
PASSENGER CAR MOTOR OILS FULL SYNTHETIC OEMs continue to evolve engine designs that demand more from motor oil. One brand has evolved right alongside MAG 1. MAG 1 with FMX Technology provides unsurpassed
More information10.6 Scope of Accreditation
Testing Laboratory Accreditation is accredited by the GCC Accreditation Center () in accordance with the recognised International Standard, General requirements for the competence of testing and calibration
More informationLABORATORY Viscometers
LABORATORY Viscometers www.irmeco.de Cannon-Fenske Routine Cannon-Fenske Routine Viscometer according to ASTM D445-446, ASTM D2515, ISO 3104-3105 used for quick and easy measurement of the viscosities
More informationCONTENTS. Introduction 1 Explanation of Terms 2 Table I Test Method Equivalence 3 Table II Alphanumeric Index of Standards 6
vii CONTENTS Introduction 1 Explanation of Terms 2 Table I Test Method Equivalence 3 Table II Alphanumeric Index of Standards 6 Analysis Reference ASTM Standard ACID NUMBER by color indicator titration
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-29808-1 SOUTH AFRICAN NATIONAL STANDARD Kerosene for domestic heating and illuminating WARNING This standard references other documents normatively. Published by SABS Standards Division
More informationAccreditation No: LAB 026. Attock Refinery Limited, Rawalpindi, Pakistan
Accreditation No: Awarded to Attock Refinery Limited, Rawalpindi, Pakistan The scope of accreditation is in accordance with the standard specifications outlined in the following page(s) of this document.
More informationAccreditation No: LAB 026. Attock Refinery Limited, Rawalpindi, Pakistan.
Issue : 10/08/15 Accreditation No: Awarded to Attock Refinery Limited, Rawalpindi, Pakistan. The scope of accreditation is in accordance with the standard specifications outlined in the following page(s)
More informationALL TESTS. Density Oscillating U-tube method * IP 365. Distillation characteristics of petroleum products - Micro distillation method IP 596
Tests marked * are ISO17025 accredited ALL TESTS TEST NAME Density Oscillating U-tube * IP 365 Distillation characteristics of petroleum products - Micro distillation IP 596 Mercaptans, hydrogen sulphide,
More informationDraft Indian Standard SYN GAS/ AMMONIA TURBO COMPRESSOR LUBRICATING OILS SPECIFICATION
Comments Only BUREAU OF INDIAN STANDARDS Draft Indian Standard Doc:PCD 3(2537)C September 2012 SYN GAS/ AMMONIA TURBO COMPRESSOR LUBRICATING OILS SPECIFICATION Not to be reproduced without the permission
More informationSynthetic EP air compressor oils based on PAO, for turbo, screw, vane and piston compressors; High-performance synthetic, PAO-based hydraulic fluids
Description Compressed air has become a major form of energy and the reliable generation of compressed air is vital. Operators require compressors to function perfectly over and beyond entire service intervals.
More informationISO 2909 / ASTM D
Oil Viscosity: Technically, the viscosity of oil is a measure of the oils resistance to shear. Viscosity is more commonly known as resistance to flow. If lubricating oil is considered as a series of fluid
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11035-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 13.02.2018 to 12.02.2023 Holder of certificate: DMT
More informationDifferences in raw material sources for biofuel processing
Differences in raw material sources for biofuel processing Kovács, A.J. Kacz, K. Lakatos, E. Neményi, M. University of West Hungary Institute of Biosystems Engineering Address: 2 Vár. Mosonmagyaróvár H-9200.
More informationNGEO REVIEW Ray Sparling, Technical Support. January 20, 2016
NGEO REVIEW Ray Sparling, Technical Support January 20, 2016 Agenda Natural Gas Stationary Engines Types/Applications Vehicular Engines Types/Applications OEMs and Approvals Summary Open Discussion Stationary
More informationSCOPE OF ACCREDITATION TO ISO GUIDE 34:2009
SCOPE OF ACCREDITATION TO ISO GUIDE 34:2009 DCG PARTNERSHIP 1, LTD. 4170 A South Main Pearland, TX 77581 Louis D Agostaro Phone: 281-648-1894 Ext. 201 REFERENCE MATERIAL PRODUCER Valid To: November 30,
More informationPERFORMANCE SPECIFICATION HYDRAULIC FLUID, PETROLEUM, INHIBITED
METRIC MIL-PRF-17672E 14 October 2010 SUPERSEDING MIL-PRF-17672D 23 January 1984 PERFORMANCE SPECIFICATION HYDRAULIC FLUID, PETROLEUM, INHIBITED This specification is approved for use by all Departments
More informationPremium Protection for Today s Engines EXTRA PROTECTION AND VALUE. PROTECK TM ELITE K SYNTHETIC BLEND ENGINE OIL
Premium Protection for Today s Engines TM EXTRA PROTECTION AND VALUE. TM ELITE K SYNTHETIC BLEND ENGINE OIL TM ELITE K SYNTHETIC BLEND 10W-30 AND 15W-40 CK-4 ENGINE OIL PROVIDES EXTRA PROTECTION AND VALUE,
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 20847 First edition 2004-03-15 Petroleum products Determination of sulfur content of automotive fuels Energy-dispersive X-ray fluorescence spectrometry Produits pétroliers Détermination
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 LABORATORY & ON-STREAM ANALYSER DIVISION, SAUDI ARAMCO TOTAL REFINING AND PETROCHEMICAL COMPANY LAB & OSA Division Saudi Aramco Total Refining and Petrochemical
More information