10.6 Scope of Accreditation

Size: px

Start display at page:

Download "10.6 Scope of Accreditation"

Felix Hill
5 years ago
Views:

Testing Laboratory Accreditation is accredited by the GCC Accreditation Center () in accordance with the recognised International Standard, General requirements for the competence of testing and

1 Testing Laboratory Accreditation is accredited by the GCC Accreditation Center () in accordance with the recognised International Standard, General requirements for the competence of testing and calibration laboratories Address. SGS Inspections Services Saudi Arabia Ltd Issue No: 3 Issue Date: 8 October 2018 SGS Building, Road 112 Cross 293, Support Industries, Jubail First Industrial Area, P.O. Box 725, Al Jubail , Saudi Arabia. Kingdom of Saudi Arabia Contact: Dr Abdul Kader Tel No: Fax No: Mobile : abdul.kader@sgs.com Web Address: Locations where testing activities covered by the above Accreditation Standard are undertaken 1- address: SGS Building, Road 112 Cross 293, Support Industries, Jubail First Industrial Area, P.O. Box 725, Al Jubail Version: 3.3 Page 1 of 14

2 For the following scope: Scope: 7. Chemical Testing: 7.81 Constituents of the environment 7.21 Miscellaneous petroleum products Version: 3.3 Page 2 of 14

3 Scope details are as follows: TEST CATEGORY ITEMS, MATERIALS SPECIFIC TESTS / PARAMETERS SPECIFICATION, STANDARD TEST METHOD OR PRODUCTS TESTED OR PROPERTIES, COMPONENTS, CHARACTERISTICS TESTED OR TECHNIQUE USED Jubail Branch Environment ph APHA H+B Total Suspended solids APHA 2540 D Total Dissolved Solids APHA 2540 C Oil & Grease APHA 5520B Chemical testing (Environmental) Water/Wastewater Dissolved Oxygen Electrical Conductivity Salinity APHA 4500-O G APHA 2510 B APHA 2520 B Residual Chlorine APHA 4500 Cl G Turbidity (NTU) APHA 2130 B Total Alkalinity (as mg/l CaCO3) APHA 2320 B Sulphide APHA 4500-S2- D Cations by IC ASTM Version: 3.3 Page 3 of 14

4 TEST CATEGORY ITEMS, MATERIALS SPECIFIC TESTS / PARAMETERS SPECIFICATION, STANDARD TEST METHOD OR PRODUCTS TESTED OR PROPERTIES, COMPONENTS, CHARACTERISTICS TESTED OR TECHNIQUE USED Oxyhalides by IC APHA 4110 D Anions by IC APHA 4110 B Cyanide APHA 4500-CN E Total Kjeldahl Nitrogen APHA 4500 N org B Total Phenols APHA 5530 D Silica APHA 4500-SiO2 D Total Nitrogen ASTM D Contaminated Soil and Waste water Total Organic Carbon Metals by ICP-MS Metals by ICP-OES Semivolatile TPH (C6-C9) TPH (C10-C35) Metals by ICP-MS Metals by ICP-OES Volatile Organic Compounds APHA 5310 C USEPA 200.8/APHA 3125 B USEPA 200.7/APHA 3120 B USEPA 3510C / 8270 C USEPA 5021A / 8015 B USEPA 3510 C / 8015 B USEPA 3051 A/3052/6020 A USEPA 3051 A/3052/6010 C USEPA 5021A / 8260 B Contaminated Soil Semivolatile USEPA 3540C / 8270 C Version: 3.3 Page 4 of 14

5 TEST CATEGORY ITEMS, MATERIALS SPECIFIC TESTS / PARAMETERS SPECIFICATION, STANDARD TEST METHOD OR PRODUCTS TESTED OR PROPERTIES, COMPONENTS, CHARACTERISTICS TESTED OR TECHNIQUE USED TPH (C10-C35) USEPA 3540C / 8015 B TPH USEPA 9071B Soil Total Kjeldahl Nitrogen ASTM E258-67(2002) Sodium Absorption Ratio (SAR) TPH (C6-C9) Calculation USEPA 5021A / 8015 B Velocity and Volumetric Flow Rate USEPA 1 and 2 Moisture Contents USEPA 4 Particulate Matter USEPA 1 Through 5 Oxygen (O2) USEPA Method 3A Environmental Testing (Air) Air/Emission Flue Gases Carbon Dioxide (CO2) Sulphur Dioxide (SO2) Oxides of Nitrogen (NOx) USEPA Method 3A USEPA Method 6C USEPA Method 7E Carbon Monoxide (CO) USEPA Method 10 Total Fluoride USEPA Method 13A Ammonia (NH3) USEPA Method CTM Version: 3.3 Page 5 of 14

6 Jubail Branch OGC Chemical Testing (OGC Scope) Petroleum Products Bromine Number ASTM D1159 Colour of Clear Liquids (Platinum Cobalt Scale) Density, Relative Density, API of Liquid Petroleum Prods by Hydrometer Corrosiveness to Copper from Pet Products by Copper Strip Test Hydrocarbon Types by FIA Smoke Point of Kerosine and Aviation Turbine Fuel ASTM Colour Saybolt Color of Petroleum Products Water and Sediment in Fuel Oils by the Centrifuge Method Naphthalene in Aviation Fuels Conradson Carbon Residue Oxidation Stability of Distillate Fuel Oil (Accelerated Method) Freezing Point of Aviation Fuels Cloud Point Cold Filter Plugging Point Conductivity of Aviation and Distillate Fuels ASTM D1209 ASTM D1298 ASTM D130 ASTM D1319 ASTM D1322 ASTM D1500 ASTM D156 ASTM D1796 ASTM D1840 ASTM D189 ASTM D2274 ASTM D2386 / ASTM D7153 ASTM D5771 ASTM D6371 ASTM D2624 Version: 3.3 Page 6 of 14

7 Water and Sediment in Distillate Fuels by Centrifuge Bromine Index of Petroleum Hydrocarbons by Electrometric Titration Boiling Range Distribution by GC (Sim Dist) Base Number by Potentiometric Perchloric Acid Titration (Thiol Mercaptan) Sulfur in Gasoline, Kerosene, Distillate Fuels Vapour Pressure of Petroleum Products (Reid Method) Thermal Oxidation Stability of Aviation Turbine Fuel (JFTOT Procedure) Acidity in Aviation Turbine Fuels Air Release Properties of Petroleum Oils Diesel Fuel Diluent in Used Diesel Engine Oils by GC Calculated Heat Val, Comp Factor and Rel Density of Gaseous Fuels Gum Content in Aviation Fuels by Jet Evaporation Method Dissolved Gases in Electrical Insulating Oil by GC-Headspace Water Separation Characteristics of Aviation Turbine Fuels (MSEP) Density, Relative Density, and API Gravity of Liquids by Densitometer Sulfur in Petroleum and Pet. Products by Energy Dispersive X-Ray Kinematic Viscosity of Transparent and Opaque Liquids ASTM D2709 ASTM D2710 ASTM D2887 ASTM D2896 ASTM D3227 ASTM D323 ASTM D3241 ASTM D3242 ASTM D3427 ASTM D3524 ASTM D3588 ASTM D381 ASTM D3612C ASTM D3948 ASTM D4052 ASTM D4294 ASTM D445 Version: 3.3 Page 7 of 14

8 Carbon Residue (micro method) Sediments in Crude Oils and Fuel Oils by Extraction Method Ash from Petroleum Products Oxidation Stability of Gasoline - Induction Period Method Hydrocarbon Type Analysis in Petroleum Distillates through 200 C Particulate Contamination in Aviation Fuels Total Sulfur in Light Hydrocarbons and Fuels by UVF Flash Point by TAG Closed Cup Tester Hydrogen Sulfide in the Vapour Phase above Residual Fuel Oils Lubricity of Diesel Fuels by HFRR Particulate Content of Middle Distillate Fuels Sulfur Compounds in Natural Gas and Gaseous Fuels by GC/FPD Water in Petroleum Products by Coulometric KF Aromatic Hydrocarbon Types in Aviation Fuels by HPLC ASTM D4530 ASTM D473 ASTM D482 ASTM D525 ASTM D5443 ASTM D5452 ASTM D5453 ASTM D56 ASTM D5705 ASTM D6079 ASTM D6217 ASTM D6228 ASTM D6304 ASTM D6379 Aromatic Hydrocarbon Types in Middle Distillates by HPLC ASTM D6591 Acid Number of Petroleum Products by Potentiometric Titration ASTM D664 (Method A) Dynamic Viscosity and Density of Liquids by Stabinger Vscosimeter ASTM D7042 Version: 3.3 Page 8 of 14

9 Elements by ICP in Middle Distillate Fuels Oxygenates in C2, C3, C4, and C5 Hydrocarbons by GC/FID Distillation of Petroleum Products at Atmospheric Pressure Flash Point by Pensky-Martens Closed Cup Manual Tester Flash Point by Pensky-Martens Closed Cup Automatic Tester Water in Petroleum Products and Bituminous Materials by Distillation Pour Point of Petroleum Products Acid Number by Colour-Indicator Titration Conditional Monitoring of In-Service Lubricants by FTIR ASTM D7111 ASTM D7423 ASTM D86 ASTM D93 ASTM D95 ASTM D97 /ASTM D5950 ASTM D974 Determination of Asphaltenes (n-heptane Insolubles) IP 143 Copper Strip Tarnish Test IP 154 Abel Flash Point - Closed-Cup method IP 170 ASTM E2412 Cold Filter Plugging Point (CFPP) IP 309 Sediment in Residual Fuel Oils and Distillate Blends by Filtration IP 375 Total Sediments in Residual Fuels - Potential & Accelerated IP 390 / ASTM D4870 Elements in Residual Fuel Oil by ICP IP 501 Level of Cleanliness of Aviation Turbine Fuel IP 565 Version: 3.3 Page 9 of 14

10 Hydrogen Sulfide in Fuel Oils Rapid Liquid Phase Extraction Method IP 570 H2S and Mercaptan Sulphur in Liquid Hydrocarbons UOP 163 Trace Metals in Oils by Wet Ashing and ICP-OES UOP 389 Chloride in Petroleum Distillate by Microcoulometry UOP 779 Mercury and Mercury Species in Liquid Hydrocarbons UOP 938 Petrochemicals Water in Volatile Solvents by KF ASTM D1364 Hydrocarbon Types, Oxygenated Compounds and Benzene by GC ASTM D6839 Insulating oils Furanic Compounds in Electrical Insulating Liquids (HPLC) ASTM D5837 Elements in Insulating Oils by ICP-AES ASTM D7151 Power Disspation Factor and Relative Permittivity of Insulating Oils ASTM D924 Interfacial Tension of Oil against Water by the Ring Method ASTM D971 Breakdown Voltage at Power Frequency of Insulating Liquids EN / IEC DDF (Tan d) / Rel. Permittivity / d.c. Resistivity EN / IEC Water Content by Coulometric KF Titration EN / IEC Insulation liquids Specific Resistance of Electrical Insulating Liquids ASTM D1169 Water by Coulometric Karl Fischer Titration Sediments and Soluble Sludge in Service-Aged Insulating Oils ASTM D1533 ASTM D1698 Version: 3.3 Page 10 of 14

11 Dielectric Breakdown Voltage of Oil Dielectric Breakdown Voltage of Insulating Liquids ASTM D1816 ASTM D877 Lube oils Water Separability of Petroleum Oils and Synthetic Fluids ASTM D1401 Trace Sediment in Lubricating Oils by Centrifuge Elements in used Lube Oils and Base Oils by ICP-AES Foaming Characteristics Seq I, 2 & 3 Insolubles in used Lubricating Oils Flash and Fire Points by Cleveland Open Cup Tester ASTM D2273 ASTM D5185 ASTM D892 ASTM D893 ASTM D92 Corrosive Sulphur in Used and Unused Lubricating Oils IEC Crude oil Salts in Crude Oil (Electrometric Method) ASTM D3230 Water in Crude Oil by Distillation Sediment and Water in Crude Oil (Centrifuge) Water Content of Crude Petroleum by Potentiometric KF ASTM D4006 ASTM D4007 ASTM D4377 Water in Crude Oils by Coulometric Karl Fischer Titration ASTM D4928 Organic Chloride in Crude Oil by Combustion and Microcoulometry ASTM D4929 (Method B) Density and Relative Density of Crude Oils by Digital Density Meter ASTM D5002 Pour Point of Crude Oils ASTM D5853 Turbine oil Oxidation Stability of Steam Turbine Oils ASTM D2272 Version: 3.3 Page 11 of 14

12 Hind. Phenolic & Arom. Amine Oxidants in non-zinc Turbine Oils ASTM D6971 Natural gas Analysis of Natural Gas by GC ASTM D1945 Real Natural Gas - Calc. of C.V, D, R.D, W.I from Composition Hydraulic fuel Cleanliness Limits of Hydraulic Fluids NAS 1638 ISO 6976 (Real Gas) Yanbu Branch OGC Mineral oils Rust-Preventing Characteristics of Mineral Oil ASTM D665 MTBE MTBE Analysis by Gas Chromatography ASTM D5441 Chemical Testing (OGC Scope) Petroleum product Acid or Base Number ASTM D 974 / IP182 Acidity in Aviation Turbine Fuel ASTM D 3242 Acidity of Black Oils ASTM D664 API Gravity at 60 0F ASTM D1298/4052 Ash from Petroleum Products Colour of Petroleum Products - ASTM Colour of Petroleum Products (Saybolt Chronometer Method) Colour Pt-Co Conradson Carbon Residue Copper Strip Corrosion Copper Strip Corrosion ASTM D482 ASTM D1500 ASTM D156 ASTM D1209 ASTM D189 ASTM D130 ASTM D1275 Version: 3.3 Page 12 of 14

13 Distillation of Petroleum Products Electrical Conductivity of Aviation and Distillate Fuels Existent Gum in Fuels by Evaporation Flash Point Abel Flash Point by Pensky-Martens Closed Cup Tester Freezing Point of Aviation Fuels Hydrocarbon Types in Liquid Petroleum Products by F.I.A. Kinematic Viscosity of Transparent and Opaque Liquids Mercaptan Sulphur Pour Point of Petroleum Products Sediment by Extraction Smoke Point of Aviation Turbine Fuels Sulphur in Petroleum Products by XRF Spectroscopy Vapor Pressure Water by Distillation Water by Karl Fischer Water by Karl Fischer Water Separation Characteristics of Aviation Turbine Fuels Total Base Number ASTM D86 ASTM D2624 ASTM D381 IP170 ASTM D93 ASTM D2386 ASTM D1319 ASTM D445 ASTM D3227 ASTM D97 ASTM D473 ASTM D1322 ASTM D4294 ASTM D323 ASTM D95 ASTM D4928 ASTM D6304 ASTM D3948 ASTM D2896 Version: 3.3 Page 13 of 14

14 Petrochemicals Acidity of Solvents ASTM D1613 Water by Karl Fischer ASTM E1064 Insulation liquids Water Content ASTM D1533 Breakdown Voltage (1 mm or 2 mm Gap-Mushroom Electrodes) Breakdown Voltage ( 2.5 mm Gap-Spherical Electrodes) Power 25 C / 90 C INTERFACIAL TENSION ASTM D1816 IEC156 ASTM D924 ASTM D971 lube oils FOAMING SEQUENCE ASTM D 892 Flash Point COC C ASTM D92 Note: the text in blue indicates the new scope OR update in the Edition of a test method in this issue of the scope of accreditation. END This laboratory is recorded as issuing accredited reports to organizations in the countries listed below. This list is current at the time of issue of this schedule. United Arab Emirates Bahrain Saudi Arabia Oman Qatar Kuwait Yemen Version: 3.3 Page 14 of 14

Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion

Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion IAS Accreditation Number Company Name Address Contact Name Telephone +966-14-398-2118 Effective Date of Scope May 1, 2018 Accreditation Standard ISO/IEC 17025:2017 TL-743 Yanbu Industrial Area Yanbu, Madina