Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
|
|
- Gabriel Hodge
- 6 years ago
- Views:
Transcription
1 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Period of validity: to Holder of certificate: gammatest Gesellschaft für zerstörungsfreie Werkstoffprüfung mbh Klöcknerstraße 93, Castrop-Rauxel Tests in the fields: manual non-destructive testing (radiographic-, ultrasonic-, penetration-, visual- and magnetic particle testing) at metallic components at plant and plant engineering Abbreviations used: see last page The testing laboratory is permitted, without being required to inform and obtain prior approval from DAkkS, to use standards or equivalent testing methods listed here with different issue dates. The testing laboratory maintains a current list of all testing methods within the flexible scope of accreditation. Radiographic testing DIN EN ISO DIN EN ISO DIN EN Non-destructive testing - Radiographic testing of metallic materials using film and X- or gamma rays - Basic rules Non-destructive testing of welds - Radiographic testing - Part 1: X- and gamma-ray techniques with film Founding - Radiographic examination This document is a translation. The definitive version is the original German annex to the accreditation certificate. 1/5
2 Ultrasonic testing DIN EN ISO DIN EN DIN EN ISO DIN EN DIN EN ISO DIN EN ISO DIN EN ISO SEL 072 and Supplement SEP SEP SEP SEP SEP Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment Non-destructive testing of steel forgings - Part 3: Ultrasonic testing of ferritic or martensitic steel forgings Non-destructive testing - Ultrasonic testing - Technique of testing claddings produced by welding, rolling and explosion Ultrasonic testing of steel flat product of thickness equal to or greater than 6 mm (reflection method) Non-destructive testing - Ultrasonic testing - Transmission technique Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections Ultrasonically tested heavy plate - Technical delivery specifications Ultrasonic testing of steel pipes for longitudinal imperfections Ultrasonic testing of steel pipes for transverse imperfections Ultrasonic testing for laminations of pipes of creep-resistant steels Ultrasonic testing of rolled semi-finished products on internal material discontinuities Ultrasonic testing of forgings and forged steel bars with diameters or edge lengths of 100 mm and above Period of validity: to Translation - 2/5
3 SEP SEP SEP DIN EN DIN EN DIN EN DIN EN DGZfP-US Ultrasonic testing of forgings of ferritic steel Ultrasonic testing of steel forgings to stringent standards, in particular for components in turbine and generator systems Ultrasonic testing of castings made of cast iron with spheroidal graphite Founding - Ultrasonic examination - Part 1: Steel castings for general purposes Founding - Ultrasonic examination - Part 2: Steel castings for highly stressed components Founding - Ultrasonic testing - Part 3: Spheroidal graphite cast iron castings Non-destructive testing - Ultrasonic thickness measurement Thickness Measurement with Ultrasound Magnetic particle testing DIN EN ISO DIN EN ISO DIN EN DIN EN DIN EN ISO Non-destructive testing - Part 1: General principles Non-destructive testing of welds - Magnetic particle testing Non-destructive testing of steel forgings - Part 1: Magnetic particle inspection Founding - Magnetic particle testing Non-destructive testing of steel tubes - Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections Period of validity: to Translation - 3/5
4 Penetrant testing DIN EN ISO DIN EN DIN EN Non-destructive testing - Penetrant testing - Part 1: General principles Founding - Liquid penetrant testing - Part 1: Sand, gravity die and low pressure die castings Founding - Liquid penetrant testing - Part 2: Investment castings Visual testing DIN EN DIN EN Non-destructive testing - Visual testing - General principles Non-destructive testing of welds - Visual testing of fusion-welded joints Cross-process standards for NDT DIN EN ISO AD 2000-Merkblatt HP 5/3 AD 2000-Merkblatt HP 5/3 Anlage 1 DVGW GW SEP SEP SEP Non-destructive testing of welds - General rules for metallic materials Manufacture and testing of joints - Non-destructive testing of welded joints Non-destructive testing of welded joints - Minimum requirements for non-destructive testing methods Welding Joints of Steel Pipelines for Gas and Water Supply - Manufacturing, Testing and Evaluation Non-destructive testing of fusion-welded seams in pipes of stainless steels Non-destructive testing of fusion-welded ferritic steel pipes Non-destructive testing of resistance welded pipes of ferritic steels Period of validity: to Translation - 4/5
5 abbreviations used: AD-HP Working group Pressure Vessel; Manufacture and testing of pressure vessels DGZfP German Society for Non-Destructive testing r. a. DVGW German Association for Gas and Water r. a.; Technical rules SEL Steel-iron delivery conditions from the Association of German Ironworks SEP Steel-iron test sheets from the Association of German Ironworks Period of validity: to Translation - 5/5
Annex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 18438 02 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 11.03.2014 to 10.03.2019 Holder of certificate: Jürgen
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11065-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 08.02.2016 to 07.02.2021 Holder of certificate: Actemium
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17453-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 03.07.2017 to 02.07.2022 Holder of certificate: SPIE
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11272-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 18.10.2017 to 17.10.2022 Holder of certificate: VDZ
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH German Accreditation Body Annex to the Accreditation Certificate D-PL-20591-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 14.08.2017 to 13.08.2022
More informationAnnex to the Accreditation Certificate D IS according to DIN EN ISO/IEC 17020:2012
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D IS 14153 02 01 according to DIN EN ISO/IEC 17020:2012 Period of validity: 16.04.2015 to 14.04.2020 Date of issue: 16.04.2015
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11057-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 20.06.2014 to 19.06.2019 Holder of certificate: OELCHECK
More informationAnnex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 11140 18 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 06.11.2014 to 05.11.2019 Holder of certificate: Fraunhofer
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL18398-02-01 according to DIN EN ISO/IEC 17025:2005 Period of validity: 26.02.2018 to 25.02.2023 Holder of certificate: SAL
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11125-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 31.07.2017 to 30.07.2022 Holder of certificate: DIN
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18869-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 30.08.2013 to 29.08.2018 Holder of certificate: ilf
More informationAnnex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 20281 01 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 31.08.2016 to 30.08.2021 Holder of certificate: Deutsche
More informationManufacturing Instructions Blank parts and semi-finished products
May 2016 Manufacturing Instructions Blank parts and semi-finished products SN 200-2 ICS 25.020 Dimensions in mm Supersedes SN 200-2:2010-09 Table of contents Page 1 Scope... 2 2 Normative references...
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-20258-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 2016-02-02 to 2021-02-01 Holder of certificate: Amphenol-Tuchel
More informationAnnex to the accreditation certificate D-PL according to DIN EN ISO/IEC 17025: and council directives 90/385/EWG 2 and 93/42/EWG 3
Deutsche Akkreditierungsstelle GmbH Annex to the accreditation certificate D-PL-13422-01-02 according to DIN EN ISO/IEC 17025:2005 1 and council directives 90/385/EWG 2 and 93/42/EWG 3 Period of validity:
More informationAnnex of the Certificate (Page 1/4) Scope of Accreditation
Annex of the Certificate (Page 1/4) As a "Type A" Inspection Body Address : Keresteciler Sitesi E Blok No:5 Kat:2 Ostim / Yenimahalle 06170 ANKARA/TÜRKİYE Phone : +90 312 385 95 30 Fax : +90 312 386 00
More informationAnnex of the Certificate (Page 1/5) Scope of Accreditation
Annex of the Certificate (Page 1/5) As a "Type A" Inspection Body Address : Esas Maltepe Ofispark Altayçeşme Mah. Çamlı Sokak No:21 Kat:8 Maltepe 34843 İSTANBUL/TÜRKİYE Phone : +90 216 518 40 50 Fax :
More informationAccreditation. a'1" ul. ( oar.hl,.n" Deutsche Akkreditieru ngsstelle G m bh. Y,/.,n" r,nn" Head of Division
( oar.hl,.n" Akkreditieru ngsstel le Deutsche Akkreditieru ngsstelle G m bh Entrusted according to Section 8 subsection 1 AkkStelleG in connection with Section 1 subsection 1 AkkStellecBV Signatory the
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-20575-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 2018-03-05 to 2021-07-28 Holder of certificate: innogy
More informationAnnex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 11238 01 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 09.02.2016 to 08.02.2021 Holder of certificate: ContiTech
More informationDÜRR NDT GmbH & CO. KG Höpfigheimer Straße Bietigheim-Bissingen
Evaluation of the image quality of a radiographic film emulsion AGFA D7 exposed by X-rays and developed by machine processing (8 min cycle time at 29 C) using Dürr NDT XR D-6 NDT developer and XR F-6 NDT
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-19722-01-00 according to DIN EN ISO/IEC 17025:2005 Holder of certificate: Institut für Lacke und Farben Magdeburg ggmbh Fichtestraße
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-12095-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 2015-07-16 to 2019-03-06 Holder of certificate: Weidmüller
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17435-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 06.12.2017 to 08.12.2018 Holder of certificate: k3works
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18137-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 19.03.2018 to 18.03.2023 Holder of certificate: Continental
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17435-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 30.09.2016 to 08.12.2018 Holder of certificate: k3works
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11109-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 13.06.2018 to 22.06.2020 Holder of certificate: TÜV
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11321-02-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 20.12.2016 to 19.12.2021 Holder of certificate: TÜV
More informationBroetje-Automation Company Standard Structural component specification for welded parts
Broetje-Automation Company Standard Table of Contents Application Area and Purpose 3 1 Structural components pursuant to DIN 1090 4 1.1 Structural component classification 4 1.1.1 Steel components < Strength
More informationAccreditation. Deutsche Akkreditierungsstelle GmbH hereby confirms that the testing laboratory
Entrusted pursuant to 8 (1) of the German Accreditation Body Act (AkkStelleG) in conjunction with 1 (1) of the Regulation on the Entrustment of the Accreditation Body (AkkStelleGBV) Accreditation Deutsche
More informationSound-absorbing spacer Sorp10
Sponsor: Reference number: 7.3 / 27080 This document is only a translated version; not legally attested Max Frank GmbH & Co. KG Mitterweg 1 94339 Leiblfing Federal Institute for Materials Research and
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18192-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 15.11.2017 to 14.11.2022 Holder of certificate: ITAP
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025: and the Directive 93/42/EEC 2 and 90/385/EEC 3
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-13412-01-02 according to DIN EN ISO/IEC 17025:2005 1 and the Directive 93/42/EEC 2 and 90/385/EEC 3 Indefinite since: 10.12.2018
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
eutsche Akkreditierungsstelle Gmb Annex to the Accreditation Certificate -PL-19399-01-00 according to IN EN ISO/IEC 17025:2005 ate of issue: 29.11.2018 older of certificate: Inspectorate eutschland Gmb
More informationPIPE LOG BOOK. Project no:... Project:... Construction section:... On behalf of:... Commissioned by:... Order no:... Date:... Construction period:...
FW-FERNWÄRME-TECHNIK GmbH Grafftring 2-6 D-29227 Celle Tel.: + 49 5141 888 88-0 Fax: + 49 5141 888 88-22 E-Mail: info@fw-gmbh.de Internet: www.fw-gmbh.de PIPE LOG BOOK... Project:... Construction section:...
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025: and the Directive 93/42/EEC 2 and 90/385/EEC 3
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18398-02-02 according to DIN EN ISO/IEC 17025:2005 1 and the Directive 93/42/EEC 2 and 90/385/EEC 3 Period of validity: 26.02.2018
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate DPL110551000 according to DIN EN ISO/IEC 17025:2005 Period of validity: 20140612 to 20160711 Date of issue: 20140612 Holder of
More informationGeneral Technical Approval
General Technical Approval German approval body for construction products and types of construction Construction Testing Authority Authority of the German Länder Governments for a uniform fulfilment of
More informationInformation for the Certification of Weld Shops in Rail Vehicle Construction According to DIN EN
Information for the Certification of Weld Shops in Rail Vehicle Construction According to DIN EN 15085-2 Certificate According DIN EN 15085-2 Railway applications - Welding of railway vehicles and components
More informationDEUTROFLUX / DEUTROMAT Magnetic Particle Testing Systems. Definitely Tested!
DEUTROFLUX / DEUTROMAT Magnetic Particle Testing Systems Definitely Tested! KARL DEUTSCH Pruef- und Messgeraetebau, Wuppertal Company Portrait The company KARL DEUTSCH was founded by Ing. Karl Deutsch
More informationPeriod of validity: to Date of issue:
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11190-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 09.03.2017 to 02.02.2020 Holder of certificate: TÜV
More informationEU Declaration of conformity
EU Declaration of conformity Confirm with the Directive 2006/42/EC: of the European Parliament and of the Council of 17 May 2006 on the approximation of the laws of the Member States relating to machinery
More informationGALLI&CASSINA. Plug Valves. Conical
Conical Plug Pressure Balanced Type UPPER HOLE LOWER HOLE The Pressure Balanced Plug Contains 2 Holes: The Upper Holes Connects the Plug Port with the Area Above Plug. The Lower hole Maintains Pressure
More informationPrevention vs. Reaction The Importance of Asset Integrity
Prevention vs. Reaction The Importance of Asset Integrity How Your Assets Typically Age Inspections Potential Failure Condition Functional Failure Time P-F Interval Why is Asset Integrity so Important?
More informationFUNDAMENTAL SAFETY OVERVIEW VOLUME 2: DESIGN AND SAFETY CHAPTER E: THE REACTOR COOLANT SYSTEM AND RELATED SYSTEMS
PAGE : 1 / 13 4. PRESSURISER 4.1. DESCRIPTION The pressuriser (PZR) is a pressurised vessel forming part of the reactor coolant pressure boundary (CPP) [RCPB]. It comprises a vertical cylindrical shell,
More informationGuideline No.: E-03(201806) E-03 MOTORS. Issued date: June 7, China Classification Society
Guideline No.: E-03(201806) E-03 MOTORS Issued date: June 7, 2018 China Classification Society Foreword: This Guideline is a part of CCS Rules, which contains technical requirements, inspection and testing
More informationCOmpOnEntS. Components WOrldWidE
the EnGinE people EnGinE Engine COmpOnEntS Components WOrldWidE Worldwide quality Made in GerMany With more than 50 years of experience, SECO has an exceptional long tradition in the manufacturing of large
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11035-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 13.02.2018 to 12.02.2023 Holder of certificate: DMT
More informationRULES PUBLICATION NO. 4/P IC ENGINES AND ENGINE COMPONENTS SURVEY AND CERTIFICATION July
RULES PUBLICATION NO. 4/P IC ENGINES AND ENGINE COMPONENTS SURVEY AND CERTIFICATION 2017 July Publications P (Additional Rule Requirements) issued by Polski Rejestr Statków complete or extend the Rules
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 DURHAM HOLDINGS CORPORATION INC. DBA MME TESTING 1039 Industrial Court Suwanee, GA 30024 Danny Collazo Phone: 678 730 2000 MECHANICAL Valid To: October 31,
More informationDetection and evaluation of rail defects with nondestructive
19 th World Conference on Non-Destructive Testing 2016 Detection and evaluation of rail defects with nondestructive testing methods Anika DEY 1, Jochen KURZ 2, Lukasz TENCZYNSKI 3 1 DB Systemtechnik GmbH
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-19065-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 2017-11-22 to 2022-11-21 Date of issue: 2017-11-22
More informationIndustry 4.0 Is Unthinkable Without Calibration!
Industry 4.0 Is Unthinkable Without Calibration! The much-discussed Industry 4.0 cannot be implemented without a clear increase in automation solutions. At the same time, this development necessitates
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18869-01-00 according to DIN EN ISO/IEC 17025:2005 Holder of certificate: ilf Forschungs- und Entwicklungsgesellschaft Lacke
More informationIn-Motion Ultrasonic Testing of the Tread of High-Speed Railway Wheels using the Inspection System AUROPA III
17th World Conference on Nondestructive Testing, 25-28 Oct 2008, Shanghai, China In-Motion Ultrasonic Testing of the Tread of High-Speed Railway Wheels using the Inspection System AUROPA III Hans-Juergen
More informationTAB B. Hydrotest Summary Report. Piping Specifications and Procedures. Pipe Manufacturers. Order XG-N Application for Leave to Open
NOVA Gas Transmission Ltd. Alces River B2 Compressor Station Order XG-N081-026-2015 Application for Leave to Open TAB B Hydrotest Summary Report Piping Specifications and Procedures Pipe Manufacturers
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-19065-04-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 2017-05-11 to 2022-05-10 Date of issue: 2017-05-11
More informationM-18 Controllable-Pitch Propeller
Guideline No.M-18(201510) M-18 Controllable-Pitch Propeller Issued date: 20 th October, 2015 China Classification Society Foreword This Guideline is a part of CCS Rules, which contains technical requirements,
More informationGuideline No.: E-03(201610) E-03 MOTORS. Issued date: October 28,2016. China Classification Society
Guideline No.: E-03(201610) E-03 MOTORS Issued date: October 28,2016 China Classification Society Foreword: This Guideline is a part of CCS Rules, which contains technical requirements, inspection and
More informationSteel forgings for pressure purposes Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels English version of DIN EN
DEUTSCHE NORM February 2000 Steel forgings for pressure purposes Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels English version of DIN EN 10222-5 { EN 10222-5 ICS 23.020,30; 77.140.80;
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ELEMENT CLEVELAND 5405 East Schaaf Road Cleveland, OH 44131 Jeffry J Smith Phone: 216 524 1450 Jeffry.Smith@element.com MECHANICAL Valid To: October 31, 2018
More information2004 ASME BOILER & PRESSURE VESSEL CODE
2004 ASME BOILER & V PRESSURE VESSEL CODE AN INTERNATIONAL CODE NONDESTRUCTIVE EXAMINATION ASME BOILER AND PRESSURE VESSEL CODE AN INTERNATIONAL CODE V NONDESTRUCTIVE EXAMINATION 2004 Edition July 1, 2004
More informationPrüffeld der Schaltwerke
Prüffeld der Schaltwerke Report No.: 16-051-MH Sheet: 2 Notes 1. The testing station of the Siemens switchgear factory (Prüffeld der Schaltwerke),, Berlin, has been approved by the DAkkS (German accreditation
More informationThe Deutsche Akkreditierungsstelle GmbH attests that the testing laboratory
Deutsche GmbH Entrusted according to Section 8 subsection 1 AkkStelleG in connection with Section 1 subsection 1 AkkStelleGBV Signatory to the Multilateral Agreements of EA, ILAC and IAF for Mutual Recognition
More informationHigh-Speed Ultrasonic Testing of ERW Pipes
19 th World Conference on Non-Destructive Testing 2016 High-Speed Ultrasonic Testing of ERW Pipes W.A.K. DEUTSCH 1, M. JOSWIG 1, R. KATTWINKEL 1, H. HARMUTH 1 1 KARL DEUTSCH Prüf- und Messgerätebau GmbH
More informationSTANDARDS and SPECIFICATIONS
ANSI (American National Standards Institute) ANSI B31.4 - Liquid petroleum transportation piping system. ANSI B31.4 - Gas transmission and distribution piping system. API (American Petroleum Institute)
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17640-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 18.12.2017 to 04.11.2018 Holder of certificate: Haltermann
More informationPrice List 2013 In-House Repairs and Calibration
In-House Repairs and Calibration Contents Page 2: Services Page 3: Repair and Certification Packages for Accumulators Page 4: Repair packages for Compact Hydraulics Power Units Page 5: Repair and Inspection
More informationDeutsche Akkreditierungsstelle GmbH
(( DAk~~"h' Akkreditierungsstelle Deutsche Akkreditierungsstelle GmbH Entrusted according to Section 8 subsection 1 AkkStelleG in connection with Section 1 subsection 1 AkkStelleGBV Signatory to the Multilateral
More informationGuideline No.: E-04(201610) E-04 GENERATORS. Issued date: October 28,2016. China Classification Society
Guideline No.: E-04(201610) E-04 GENERATORS Issued date: October 28,2016 China Classification Society Foreword: This Guideline is a part of CCS Rules, which contains technical requirements, inspection
More informationTAM International, Inc. QI Visible Magnetic Particle Inspection
TAM International, Inc. QI-8.2.4-12 Visible Magnetic Particle Inspection Approved by Quality Assurance Manager Signature/Date: Greg Fletcher Reviewed by Sr. Quality Analyst Signature/Date: Thomas Young
More informationImproving the Quality of NDT in the Rail Sector through the Introduction of Advanced Technologies and NDT Means
More Info at Open Access Database www.ndt.net/?id=15123 Improving the Quality of NDT in the Rail Sector through the Introduction of Advanced Technologies and NDT Means O. Iurchenko 8 Naberezhno-Lugova
More informationIndustry 4.0 Is Unthinkable Without Calibration!
Industry 4.0 Is Unthinkable Without Calibration! Improved plant availability through regular sensor calibration The much-discussed Industry 4.0 cannot be implemented without a clear increase in automation
More informationAnnex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 19102 01 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 03.09.2013 to 02.09.2018 Holder of certificate: AUCOTEAM
More informationInfluence of mounting tube diameter on anemometer output
Influence of mounting tube diameter on anemometer output In cooperation with: Adolf Thies GmbH & Co. KG Hauptstraße 76 37083 Göttingen Germany Deutsche WindGuard Wind Tunnel Services GmbH Oldenburger Str.
More informationSafety is our first priority TM
Safety is our first priority T Catalog No. -2013.YP1 2 3 T YOKE Yellow Point Series NEVER EXCEED PUBLISHED WORKING LOAD LIIT 4 Worldwide Quality Type Approval And Certificate: 5 NEVER EXCEED PUBLISHED
More informationULTRASONIC EXAMINATION
Page 1 of 9 ULTRASONIC EXAMINATION PROCEDURE Doc. No. KNS/UT/01.REV 0 Page: 9 of 9 Date: 15.09.2012 ULTRASONIC EXAMINATION PROCEDURE PREPARED & APPROVED BY NDE- Level III CERTIFIED BY REVIEWED BY Page
More informationTechnical Datasheet. HM AC Series. Turbine Flow Meters. for High Pressure Applications up to 1,400 bar
www.kem-kueppers.com info@kem-kueppers.com Technical Datasheet HM AC Series Turbine Flow Meters for High Pressure Applications up to 1,400 bar Certified according to DIN EN ISO 9001 2 HM AC Series Turbine
More informationYellow Point. Catalog No YP.1
Yellow Point Catalog No. -2014.YP.1 2 3 T YOKE Yellow Point Series NEVER EXCEED PUBLISHED WORKING LOAD LIIT 4 Worldwide Quality Type Approval And Certificate: 5 NEVER EXCEED PUBLISHED WORKING LOAD LIIT
More informationAnnex to the Accreditation Certificate D-PL according to ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-20658-01-00 according to ISO/IEC 17025:2005 Period of validity: 13.06.2018 to 12.06.2023 Holder of certificate: IMAT Shenyang
More informationDEUTSCHE NORM DIN EN 10080
DEUTSCHE NORM DIN EN 10080 August 2005 { ICS 77.140.15; 77.140.60; 77.140.65 Supersedes DIN V ENV 10080, August 1995 edition, parts of DIN 488-1, September 1984 edition, DIN 488-2, DIN 488-4 and DIN 488-6,
More informationYellow Point. Catalog No YP.2
Yellow Point Catalog No. 8-15.YP.2 2 3 T YOKE Yellow Point Series NEVER EXCEED PUBLISHED WORKING LOAD LIIT 4 Worldwide Quality Type Approval And Certificate: 5 NEVER EXCEED PUBLISHED WORKING LOAD LIIT
More informationVolumeter TRZ 03-K PRODUCT INFORMATION. Reliable Measurements of Gas
Volumeter TRZ 0-K PRODUCT INFORMATION Reliable Measurements of Gas Method of operation, Construction Method of operation The TRZ 0-K Volumeter is a flow meter suitable for metering gases, where the rate
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18436-01-01 according to DIN EN ISO/IEC 17025:2005 Period of validity: 22.01.2018 to 28.10.2019 Holder of certificate: ISP
More informationGuideline of the Railway Vehicles Coordination Committee (Draft Guideline DVS 1619)
Guideline of the Railway Vehicles Coordination Committee (Draft Guideline DVS 1619) Procedure for the certification of welding manufacturers for welding railway vehicles and components according to DIN
More informationISO INTERNATIONAL STANDARD. Petroleum and natural gas industries Packaged reciprocating gas compressors
INTERNATIONAL STANDARD ISO 13631 First edition 2002-08-01 Petroleum and natural gas industries Packaged reciprocating gas compressors Industries du pétrole et du gaz naturel Unités de compresseurs alternatifs
More informationTOFD on Weld Seams. New Prestandard CEN/TS : professional customer focused cost aware. ECNDT 2006 Berlin, September 2006 We.2.7.
professional customer focused cost aware New Prestandard CEN/TS 14751 : TOFD on Weld Seams ECNDT 2006 Berlin, 25.-29. September 2006 We.2.7.2 Dr.-Ing. Andreas Hecht Plant Inspection / Materials Engineering
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Charter Coating Service (2000) Ltd. Suite
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11068-09-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 10.07.2014 to 09.07.2019 Holder of certificate: Karlsruher
More informationDEUTSCHE NORM July 1998
DEUTSCHE NORM July 1998 Non-destructive testing of steel forgings Part 3: Ultrasonic testing of ferritic or martensitic steel forgings English version of DIN EN 10228-3 { EN 10228-3 ICS 77.040.20; 77.140.85
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationSVENSK STANDARD SS-EN Järn och stål Ultraljudprovning av H-profil med parallella flänsar samt IPE-profil
SVENSK STANDARD SS-EN 10306 Fastställd 2002-01-18 Utgåva 1 Järn och stål Ultraljudprovning av H-profil med parallella flänsar samt IPE-profil Iron and steel Ultrasonic testing of H beams with parallel
More informationSVENSK STANDARD SS-EN
SVENSK STANDARD SS-EN 10246-9 Handläggande organ Fastställd Utgåva Sida SVENSK MATERIAL- & MEKANSTANDARD, SMS 2000-02-25 1 1 (1+11) Copyright SIS. Reproduction in any form without permission is prohibited.
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-14153-02-01 according to DIN EN ISO/IEC 17025:2005 Period of validity: 26.09.2017 to 15.04.2020 Holder of certificate: TÜV
More informationKKAI Report No Rev 1 Prepared for BioHeatUSA April 28, 2009
1. Summary... 3 2. Background... 3 3. Scope... 3 4. European Suppliers... 4 5. Materials... 4 6. Design... 4 7. Fabrication... 5 8. Examination... 6 9. Inspection... 6 10. Testing... 8 11. Quality Control
More informationDatasheet. control line. e109 - September Manufacturing Range. Experience. Applications. Production Facilities
Datasheet Experience The Oil & Gas sector represents one of Fine Tubes principal markets for supply of a wide range of tubular product forms and materials. Our products have been successfully used in some
More informationTechnical Datasheet. HM U Series. Turbine Flow Meters. for lubricating liquids
www.kem-kueppers.com info@kem-kueppers.com Technical Datasheet HM U Series Turbine Flow Meters for lubricating liquids Certified according to DIN EN ISO 9001 2 HM U Series Turbine Flow Meters Description
More informationTHE FUTURE NEEDS STEEL
THE FUTURE NEEDS STEEL Schmiedewerke Gröditz GmbH produces open-die forgings and seamless rolled ring products which can be supplied either rough or finish-machined on request. And in this way it pursues
More informationVolumeter. RMG Meßtechnik GmbH. Publication No E
Volumeter TRZ 03-K RMG Meßtechnik GmbH Publication No. 3.171-E P.O.Box 80 D-3550 Butzbach (Germany) Phone: +49 (0)6033 897-0 Fax: +49 (0)6033 897-130 E-mail: messtechnik@rmg.de Web site: http://www.rmg.de
More informationStandards Pertaining to Valves Used in the Oil & Gas Industry
PDHonline Course M159 (2 PDH) Standards Pertaining to Valves Used in the Oil & Gas Industry Instructor: Peter Smith, HNC (Mech) 2012 PDH Online PDH Center 5272 Meadow Estates Drive Fairfax, VA 22030-6658
More information