Softening point by Ring & Ball. Density and relative density of liquids by Hubbart pycnometer
|
|
|
- Jesse Benson
- 6 years ago
- Views:
Transcription
1 Softening point by Ring & Ball Density and relative density of liquids by Hubbart pycnometer
2 Distillation of petroleum
3 Melting point of petroleum wax Precipitation number of lubricating oils
4 Saponification number of petroleum products
5 Water in petroleum products and bituminous materials by distillation
6 Water and sediment in crude oil by centrifuge method Pour point of petroleum products Detection of copper corrosion from petroleum products by the copper strip tarnish test
7 Saybolt color of petroleum products burning quality of kerosine Conradson carbon residue of petroleum products Gasoline diluent in used gasoline engine oils by distillation Existent gum in fuels by jet evaporation
8 Kinematic viscosity of transparant and opaque liquids Glass cappilary kinematic viscometers
9 Sediment in crude oils and fuel oils by the extraction method Ash from petroleum products unsulfonated residue of petroleum plant spray oils Ramsbottom carbon residue of petroleum products Oxidation stability of gasoline
10 Carbonizable substances in white mineral oils Dropping point of lubricating grease Aniline point and mixed aniline point of petroleum products and hydrocarbon solvents carbonizable waxes in paraffin wax
11 Rust preventing characteristics of inhibited mineral oil in the presence of water Oil content of petroleum wax Color by acid wash Copper corrosion of industrial aromatic hydrocarbons
12 Standard distillation of petroleum Solidification Point of Benzene Volatile oil in rosin
13 Foaming characteristics of lubricating oils Insolubles in used lubricating oils Congealing point of petroleum waxes Density and relative density of liquids by Lipkin bicappilary pycnometer
14 Oxidation stability of lubricating greases by the oxygen bomb method Oxidation characteristics of inhibited mineral oils Hydrogen in petroleum fractions Discontinued 1986, Replaced By No Replacement
15 Standard distillation of petroleum Water reaction of aviation fuels Boiling point of engine coolants Bromine Numbers of Petroleum Distillates and Commercial Aliphatic Olefins by Electrometric Titration1
16 Distillation of petroleum products at reduced pressures Freezing Point of Aqueous Engine Coolants
17 Colour of clear liquids (Platinum-Cobalt scale) Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer Sulfur in petroleum products (lamp method)
18 Density, relative density or API gravity of crude petroleum and liquid petroleum products by hydrometer method Hydrocarbon types in liquid petroleum products by fluorescent indicator adsorption Permanganate time of acetone and methanol
19 Corrosion test for antifreezes water separability of petroleum oils and synthetic fluids Density an relative density of viscous materials by Bingham pycnometer Density and relative density of viscous materials by Lipkin bicappilary pycnometer
20 Solidification Point of Industrial Organic Chemicals ASTM color of petroleum products Total iodine value of drying oils and their derivatives Colour of transparent liquids (gardner colour scale) Acidity or Alkalinity of Water
21 Density/Relative Density of Light Hydrocarbons by Pressure Thermohydrometer Water miscibility of water soluble solvents Phenolic Compounds in Water water and sediment in fuel oils by centrifuge method Volatility of liquefied petroleum gases Copper strip corrosion by liquefied petroleum gases
22 Foaming tendencies of engine coolants in glassware Discontinued 1991, Replaced By No Replacement Foots in raw linseed oil (gravimetric method) Depentanization of gasoline and naphtas Isolation of representative satures fraction from low-olefinic naphtas
23 Characteristic Groups by the Clay-Gel Absorption Chromatographic Method Sampling and Chemical Analysis of Chlorine-Containing Bleaches
24 Cyanides in Water Color of Halogenated Organic Solvents and Their Admixtures (Platinum-Cobalt Scale) Kinematic viscosity of asphalts Viscosity of Asphalts by Vacuum Capillary Viscometer Oxidation stability of oils by rotating bomb
25 Oxidation stability of distillate fuel oil Peroxides in Styrene Monomer Freezing point of aviation fuels Hydrogen sulfide in liquified petroleum gas
26 Oxidation Stability of Mineral Insulating Oil Oxidation Stability of Mineral Insulating Oil Cloud point of petroleum oils Discontinued, Replaced By No Replacement Research Octane Number of Spark-Ignition Engine Fuel Water and sediment in distillate fuels by centrifuge
27 Demulsibility Characteristics of Lubricating Oils Hydrogen Sulfide in natural gas Sulfur in liquefied petroleum gases Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test)
28 Distillation of crude petroleum (15-theoretical plate column) Sulfur Dioxide Content of the Atmosphere (West-Gaeke Method)
29 Low temperature viscosity of automotive fluid lubricants measured by brookfiels viscometer Solvent extractables in petroleum waxes Acidity in aviation turbine fuel Separation and Collection of Particulate and Water-Soluble Gaseous Fluorides in the Atmosphere (Filter and Impinger Method) Gas bubble separation time of petroleum oils (Air Release Value)
30 Density and relative density of liquids by Lipkin bicappilary pycnometer Benzene and toluene in finished motor and aviation gasoline by gas chromatography Practice for Calibration Techniques Using Permeation Tubes Analysis of Gases Dissolved in Electrical Insulating Oil by Gas Chromatography Analysis of Oil-Soluble Petroleum Sulfonates by Liquid Chromatography
31 Purity of Styrene by Freezing Point Method Nitrite-Nitrate in Water Solidification point of petroleum wax Water in crude oil by distillation
32 Water and sediment in crude oil by the centrifuge method Detection of copper corrosion from lubricating grease Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures) Determination of the sludging tendencies of inhibited mineral oils
33 Micro carbon residue of petroleum products Distillate Fuel Storage Stability at 43 C (110 F) Sediment in crude by membrane filtration
34 Determination of Organic chloride content in Crude Oil
35 Distillation of heavy hydrocarbon mixtures (vacuum potstill method)
36 Evaluation of corrosivenes of diesel engine oil Salt in Crude Oils (Potentiometric Method)
37 Determination of asphaltenes Evaluation of corrosivenes of diesel engine oil at 135C Bench Oxidation of Engine Oils by ROBO Apparatus
38
39 Moisture determination Petroleum parrafins, method for determination of fraction composition
40 Silver corrosion test by aviation turbine fuels mercaptan sulphur and hydrogen sulphide content of liquefied petroleum gases (LPG) - Electrometric titration method
41 Oxidation stability of inhibited mineral turbine oils Cold filter plugging point Determination of front octane number
42 Stability- Corrosion test for non-aqueous fire resistant fluids Total sediment in residual fuel oils Hydrogen sulphide in fuel oils
43
44
45 Foaming in aqueous amine solutions Hydrogen sulfide in gases by the Tutwiler method Peroxide in gasoline Parrafin wax content of petroleum oils and asphalts Hydrogen sulfide, mercaptan sulfur and carbonyl sulfide in hydrocarbon gases by potentiometric titration
46 Traces of sulphur in petroleum distillates Total cyanide in refinery waters by visible spectophotometry
47 Carbon dioxide in amine solution Total amine in solutions Trace metals in liquefied petroleum gas
Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion
IAS Accreditation Number Company Name Address Contact Name Telephone +966-14-398-2118 Effective Date of Scope May 1, 2018 Accreditation Standard ISO/IEC 17025:2017 TL-743 Yanbu Industrial Area Yanbu, Madina
SCOPE OF ACCREDITATION
Standards Council of Canada 600-55 Metcalfe Street Ottawa, ON K1P 6L5 Canada Conseil canadien des normes 55, rue Metcalfe, bureau 600 Ottawa, ON K1P 6L5 Canada SCOPE OF ACCREDITATION InnoTech Alberta Inc.
Coefficient of Friction of Lubricants D 5707 p. 69 Coking Value D 4715 p. 70 Cold Cranking Simulator Manual Method D 2602 p. 71 Automatic Method--see
Introduction p. 1 Explanation of Terms p. 2 Test Method Equivalence p. 3 Alphanumeric Index of Standards p. 5 Acid Number Colorimetric Titration--see also Base Number, p. 43 D 974 p. 11 Potentiometric
SCOPE OF ACCREDITATION TO ISO/IEC 17043:2010. ASTM INTERNATIONAL 100 Barr Harbor Drive West Conshohocken, PA Amy Meacock
SCOPE OF ACCREDITATION TO ISO/IEC 17043:2010 ASTM INTERNATIONAL 100 Barr Harbor Drive West Conshohocken, PA 19428 Amy Meacock 610 832 9688 PROFICIENCY TESTING PROVIDER Valid To: May 31, 2021 Certificate
10.6 Scope of Accreditation
Testing Laboratory Accreditation is accredited by the GCC Accreditation Center () in accordance with the recognised International Standard, General requirements for the competence of testing and calibration
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 LABORATORY SERVICES, PETROTRIN Southern Main Road Pointe-A-Pierre, Trinidad, Trinidad & Tobago Peter Bhim Phone: 868 658 4200 CHEMICAL Valid To: November 30,
Annex no. 1 of Accreditation Certificate no. LI 333 from
Valid from 04.02.2008 to 04.02.2012 Oil Products Laboratory DJ No. 226, Nvodari, Constana county belonging to SC ROMPETROL QUALITY CONTROL SRL 1 2 3 4 Physical tests 1. Determination of the density with
Schedule of Accreditation issued by United Kingdom Accreditation Service High Street, Feltham, Middlesex, TW13 4UN, UK
Unit A Shears Way Brooklands Close Sunbury-on-Thames Middlesex TW16 7EE Contact: Mr Craig Stone Tel: +44 (0)1932 732103 Fax: +44 (0)1932 732113 E-Mail: craig.stone@intertek.com Website: SUMMARY OF ACCREDITATION
Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17640-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 18.12.2017 to 04.11.2018 Holder of certificate: Haltermann
ASTM Methods that are feasible with Metrohm instruments
ASTM Methods that are feasible with Metrohm instruments Automotive ASTM D5827-09 Standard test method for analysis of engine coolant for chloride and other anions by ion Biofuels a) Biodiesel ASTM D664-09
PRICE LIST 2017/2018
PRECISION PETROLEUM LABS, INC. 5915 STAR LANE HOUSTON, TX 77057 PRICE LIST 2017/2018 PH: 713-680-9425 Fax: 713-680-9564* WEBSITE: PRECISIONLABS.ORG FUEL TESTING Acidity as Acetic Acid D-1613 $65.00 Alcohol
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK SGS West Thurrock Laboratory Contact: David Mercer (Laboratory Manager) 859 London Road Tel: +44 (0)1708 681943 West Thurrock Fax: +44 (0)1708
ALL TESTS. Density Oscillating U-tube method * IP 365. Distillation characteristics of petroleum products - Micro distillation method IP 596
Tests marked * are ISO17025 accredited ALL TESTS TEST NAME Density Oscillating U-tube * IP 365 Distillation characteristics of petroleum products - Micro distillation IP 596 Mercaptans, hydrogen sulphide,
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 LABORATORY & ON-STREAM ANALYSER DIVISION, SAUDI ARAMCO TOTAL REFINING AND PETROCHEMICAL COMPANY LAB & OSA Division Saudi Aramco Total Refining and Petrochemical
Paragon Scientific Ltd Proficiency Testing Scheme Schedule
Paragon Scientific Ltd Proficiency Testing Scheme Schedule Proficiency Testing Scheme Schedule Page 1 of 16 Issue : 29/01/2015 Print : 25/06/2018 Viscosity ASTM D445 - Standard Test Method for Kinematic
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SOUTHWEST RESEARCH INSTITUTE Office of Automotive Engineering Fuels and Lubricants Research Division 6220 Culebra Road, P.O. Drawer 28510 San Antonio, TX 78228-0510
American Society for Testing and Materials
SUANDARDS 8UMMARV A summary of relevant Standards published by the British Standards Institution (including those which relate to International Standards), and by the American Society for Testing and Materials.
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SOUTHWEST RESEARCH INSTITUTE Office of Automotive Engineering Fuels and Lubricants Research Division 6220 Culebra Road, P.O. Drawer 28510 San Antonio, TX 78228-0510
CONTENTS. Introduction 1 Explanation of Terms 2 Table I Test Method Equivalence 3 Table II Alphanumeric Index of Standards 6
vii CONTENTS Introduction 1 Explanation of Terms 2 Table I Test Method Equivalence 3 Table II Alphanumeric Index of Standards 6 Analysis Reference ASTM Standard ACID NUMBER by color indicator titration
International Quality Assurance Exchange Program Schedule. Fuel Month Number Type Dispatch Date Closing Date
Fuel 2018 Month Number Type Dispatch Date Closing Date January February March April May June July August September October November December M902 Motor Gasoline, Premium A372 Aviation Gasoline, 100LL D295
Petro Solutions. Analytical Instruments for the Petrochemical Industry
Petro Solutions Analytical Instruments for the Petrochemical Industry Analytical Excellence Petrochemical Analytical Instruments for Accurate and Compliant Analyses From crude to gasoline, diesel, liquid
General Guide of Lubricants Recycle
General Guide of Lubricants Recycle This paper is a disscution on waste/used lubricating oil recycling. For Equipment & Solution Enquiry: solution@wpenvironmental.com For More Information: www.wpenvironmental.com
Savant Labs Laboratory Testing Services. Tests by Method
ASTM D86 Distillation 400 ml ASTM D92 Fire Point, Cleveland Open Cup 250 ml ASTM D92 Flash Point and Fire Point, Cleveland Open Cup 250 ml ASTM D92 Flash Point, Cleveland Open Cup 250 ml ASTM D93 Flash
REBCO (RUSSIAN EXPORT BLEND CRUDE OIL) SPECIFICATION GOST
REBCO (RUSSIAN EXPORT BLEND CRUDE OIL) SPECIFICATION GOST 51858-2002 Characteristics Units Result Test Method Density (Specific Gravity) @ 20 C g /sm 3 0.870 ASTM D5002 Sulphur Content wt.% 1.8 ASTM D4294
एमआरप एल ग णव नय ण य गश ल उप दन व श:२०१७ MRPL QC LABORATORY
एमआरप एल ग णव नय ण य गश ल उप दन व श:२०१७ MRPL QC LABORATORY PRODUCTS SPECIFICATIONS:2017 INDIAN STANDARD (IS) SPECIFICATIONS FOR DOMESTIC PRODUCTS: 2017 S.No Product Name Specification Number 1 Liquefied
ASTM THERMOMETERS, TEST SPECIMENS AND GLASSWARE
ASTM THERMOMETERS, TEST SPECIMENS AND GLASSWARE Test Methods Page ASTM Thermometers...184 Glass Apparatus for ASTM Test Methods...192 Standardized Metal Test Specimens...197 www.koehlerinstrument.com Koehler
GB Translated English of Chinese Standard: GB NATIONAL STANDARD OF THE
Translated English of Chinese Standard: GB17930-2013 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 75.160.20 E 31 GB 17930-2013 Replacing
Supply of Services for Detailed OEB Crude Assay Analysis
Tender Number [9900009229] Supply of Services for Detailed OEB Crude Assay Analysis SCOPE OF WORK SCOPE OF WORK 1. Introduction Orpic is the brand name for Oman Oil Refineries and Petroleum Industries
Scientific glass blowing
Scientific glass blowing Normalab France S.A.S. is specialized in the scientific glass blowing since the beginning of the company in 1963. Thanks to this experience of more than fifty years and a team
ASTM D2007M/ASTM D2549M In-house method/astm D6560/D3279
ID Test Standard Amount Required Price for Cost Recovery Projects (Can $) 1 2 3 4 5 Sulfur compounds distribution by boiling point (GC-SCD) Sulfur compound speciation by GC-SCD Nitrogen compounds distribution
GB Translated English of Chinese Standard: GB NATIONAL STANDARD
Translated English of Chinese Standard: GB17930-2016 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 75.160.20 E 31 GB 17930-2016 Replacing
Smoke Point Significance and Use
Smoke Point The maximum height, in millimetres, of a smokeless flame of fuel burned in a wick-fed lamp of specified design. The sample is burned in an enclosed wick-fed lamp that is calibrated against
GB Translated English of Chinese Standard: GB NATIONAL STANDARD
Translated English of Chinese Standard: GB18351-2015 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 75.160.20 E 31 GB 18351-2015 Replacing
Alcor Petrolab Company Test List March 14, 2018 Item Description Sample Volume-ML Sample Volume-G
A-A-59173A-00 A-A-59173A 3.8 (Solidification @ -55 C / -67 F) 100 A-A-59173A-01 A-A-59173A 3.1 (Visual Inspection) 100 AAR-M914-00 AAR M-914 2.3.2 (Freezing Point) 100 AAR-M914-01 AAR M-914 2.3.3 (Spreadability)
Fuel Related Definitions
Fuel Related Definitions ASH The solid residue left when combustible material is thoroughly burned or is oxidized by chemical means. The ash content of a fuel is the non combustible residue found in the
Fundamentals of Petroleum Refining Refinery Products. Lecturers: assistant teachers Kirgina Maria Vladimirovna Belinskaya Natalia Sergeevna
Fundamentals of Petroleum Refining Refinery Products Lecturers: assistant teachers Kirgina Maria Vladimirovna Belinskaya Natalia Sergeevna 1 Refinery Products Composition There are specifications for over
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK ITS Testing Services (UK) Limited (Caleb Brett - Downstream) Caleb Brett House Unit A 734 London Road West Thurrock Grays Essex RM20 3NL Contact:
ANNEX 2, REFERENCE FUELS
ANNEX 2, REFERENCE FUELS A.2.1. A.2.1.1. EUROPE, INDIA, SOUTH AFRICA Petrol (E5) Parameter Unit Limits (1) Test method Research octane number, RON 95.0 EN 25164 pren ISO 5164 Motor octane number, MON 85.0
CHAPTER 27 MINERAL FUELS, MINERAL OILS AND PRODUCTS OF THEIR DISTILLATION; BITUMINOUS SUBSTANCES; MINERAL WAXES
CHAPTER 27 MINERAL FUELS, MINERAL OILS AND PRODUCTS OF THEIR DISTILLATION; BITUMINOUS SUBSTANCES; MINERAL WAXES NOTES: 1. This Chapter does not cover: (a) Separate chemically defined organic compounds
Crude Assay Report. Crude Oil sample marked. Barrow Crude Oil. On Behalf Of. Chevron Australia Pty Ltd. Laboratory Supervisor. Crude Assay Chemist
Crude Assay Report on Crude Oil sample marked Barrow Crude Oil On Behalf Of Chevron Australia Pty Ltd. Reported by: Approved by: Michelle Fernandez Laboratory Supervisor Jhonas Fernandez Crude Assay Chemist
Specifications Of Straight Run Naphtha for Exportation
Specifications Of Straight Run Naphtha for Exportation ASTM Specific Gravity @ 60/60 F 1298 160 0.690-0.730 Colour VISUAL Colourless R.V.P @ 100 F kg/cm2 max 323 69 0.07 Sulphur, Total %mass max 1266 107
Fig:1.1[15] Fig.1.2 Distribution of world energy resources. (From World Energy Outlook 2005, International Energy Agency.)[16,17]
![Fig:1.1[15] Fig.1.2 Distribution of world energy resources. (From World Energy Outlook 2005, International Energy Agency.)[16,17]](/thumbs/89/100738047.jpg "Fig:1.1[15] Fig.1.2 Distribution of world energy resources. (From World Energy Outlook 2005, International Energy Agency.)[16,17]")
Introduction :Composition of petroleum,laboratory tests,refinery feedstocks and products Fig:1.1[15] Fig.1.2 Distribution of world energy resources. (From World Energy Outlook 2005, International Energy
Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18436-01-01 according to DIN EN ISO/IEC 17025:2005 Period of validity: 22.01.2018 to 28.10.2019 Holder of certificate: ISP
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Issue No: 031 Issue date: 21 ugust 2018 ccredited to Unit 7 Prince William Drive
DRAFT EAST AFRICAN STANDARD
ICS 75.160.20 DRAFT EAST AFRICAN STANDARD Automotive gasoline (premium motor spirit) Specification EAST AFRICAN COMMUNITY EAC 2018 Third Edition 2018 Copyright notice This EAC document is copyright-protected
Test Methods & Procedures Spec Numbers Description
METHODS & PROCEDURES Test Methods & Procedures Test Methods & Procedures Spec Numbers Description Air Release Value Minutes to 0.2% air @ 50 Aniline Point Anti-Wear Vane Pump Test 250 hours, 140 bar @
OIL REFINERY PROCESSES
OIL REFINERY PROCESSES 1 Types of hydrocarbons Types of hydrocarbons (parafffins, naphthenes, and aromatics). This rating is important to the refinery since the value of the crude oil decreases from classification
Index. This page has been reformatted by Knovel to provide easier navigation.
Index A Absolute accuracy 22 Accelerated gum test 126 Accelerated oxidation 126 Accelerated stability test diesel fuel 193 Accuracy 20 22 23 365 absolute 22 approximate 22 bias 22 graphical method 23 Acidity
5.7.1 Carbon Black in Styrene-Butadiene Rubber Recipe and Evaluation Procedure (D 3191) and Carbon Black Evaluation in Natural Rubber (D 3192)
Table of Contents 1 Introduction 1.1 History 1.2 ASTM D11 Standards 1.3 Purpose 1.4 Economic Savings for Users and Producers Through Test Method Rationalization 1.5 Importance of Quality 1.6 Standard Target
Petroleum Refining Fourth Year Dr.Aysar T. Jarullah
Oil Products 1- Gaseous Fuels. Natural gas, which is predominantly methane, occurs in underground reservoirs separately or in association with crude oil. The principal types of gaseous fuels are oil (distillation)
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 6 Prenton Way Contact: Dr J Roberts North Cheshire Trading Estate Tel: +44 (0)151 649 9955 Prenton Fax: +44 (0)151 649 9977 Wirral E-Mail:
Regional Laboratory, Indian Oil Corporation Limited, Korukkupet Terminal, Kathivakkam High Road, Chennai, Tamil Nadu
Regional, Indian Oil Corporation Limited, Korukkupet Last Amended on 07.01.2014 Page 1 of 5 Specific Method Specification against Range of ing / I. PETROLEUM PRODUCTS 1. JetA1, JP5 Acidity, Total P-113
National Oil Corporation Libyan Petroleum Institute. Crude oil assay Sarir crude oil
National Oil Corporation Libyan Petroleum Institute Crude oil assay Sarir crude oil Work Order No. LPI- 00344/10/IL02/2008 Client: National Oil Corporation Date of Issue: Dec., 2008 Prepared by: Industrial
National Oil Corporation Libyan Petroleum Institute. Crude Oil Assay Messla Crude Oil
National Oil Corporation Libyan Petroleum Institute Crude Oil Assay Messla Crude Oil Work Order No. LPI- 00344/08/IL02/2008 Client: National Oil Corporation Date of Issue: Nov., 2008 Prepared by: Industrial
ANNEX 3 REFERENCE FUELS. Parameter Unit Limits (1) Test method Minimum Maximum Research octane number, RON
WLTP-2012-018 Annex 3 Draft Reference fuels 03.06.2012 ANNEX 3 REFERENCE FUELS The reference fuel specifications listed in this annex are those that are to be used for the WLTP Validation 2 exercise and
Exceeding Expectations
Technical Notes # 028 Linear vs. Non-Linear that is the question Exceeding Expectations When blending, it is important to understand whether the specification you are blending for is linear or non-linear
CUSTOMS TARIFF - SCHEDULE V - 1
V - 1 Section V MINERAL PRODUCTS 27 - i Chapter 27 MINERAL FUELS, MINERAL OILS AND PRODUCTS OF THEIR DISTILLATION; BITUMINOUS SUBSTANCES; MINERAL WAXES Notes. 1. This Chapter does not cover: (a) Separate
360 INDEX. boiling point of gas oil components, 84 boiling range, 353 bunker fuels, 8 fuel No. 6 characteristics, 339 classification, 338
Index acidity/acid no., 351 additives aviation gasoline, 317 classification, 178 composition, 256 consumption, 182 diesel distribution, 180 diesel fuels, 179 diesel vehicle system, 181 fuels, 121, 351
Tests conducted under the following industry standards for PermaFrost API ASHRAE ARI ASTM EPA ANSI UL. SINCE 1985 Quality Controlled Through Analysis
Tests conducted under the following industry standards for PermaFrost API ASHRAE ARI ASTM EPA ANSI UL SINCE 1985 Client: Powertron LLC Requested By: Mr. Tony Sgarbi Sample: 10% PermaFrost + 90% Report
Significance of Each Test. 1. Color (Visual)
Significance of Each Test 1. Color (Visual) Determine the color of lubricant product by assessing the appearance of transmitted light appearance and intensity, as compare with a standard. Color alone is
Characterization of crude:
Crude Oil Properties Characterization of crude: Crude of petroleum is very complex except for the lowboiling components, no attempt is made by the refiner to analyze for the pure components that contained
Distillation process of Crude oil
Distillation process of Crude oil Abdullah Al Ashraf; Abdullah Al Aftab 2012 Crude oil is a fossil fuel, it was made naturally from decaying plants and animals living in ancient seas millions of years
MILITARY SPECIFICATION LUBRICATING OIL, VACUUM PUMP, MECHANICAL
INCH-POUND MIL-DTL-83767C 24 September 2007 SUPERSEDING MIL-L-83767B 8 February 1980 MILITARY SPECIFICATION LUBRICATING OIL, VACUUM PUMP, MECHANICAL Reactivated after 24 September 2007 and may be used
CUSTOMS TARIFF - SCHEDULE. Chapter 27 MINERAL FUELS, MINERAL OILS AND PRODUCTS OF THEIR DISTILLATION; BITUMINOUS SUBSTANCES; MINERAL WAXES
CUSTOMS TARIFF - SCHEDULE 27 - i Chapter 27 MINERAL FUELS, MINERAL OILS AND PRODUCTS OF THEIR DISTILLATION; BITUMINOUS SUBSTANCES; MINERAL WAXES Notes. 1. This Chapter does not cover: (a) Separate chemically
Gasoline Specifications
Gasoline Specifications Difference between Straight run gasoline & cracked gasoline Volatility 1-ASTM 2- Reid vapor pressure Gum Content 1-Existing gum 2-Poteintal gum 3-Oxidation Stability 4-Amount of
PERFORMANCE SPECIFICATION CALIBRATING FLUIDS, AIRCRAFT FUEL SYSTEM COMPONENTS
METRIC 20 January 2012 SUPERSEDING MIL-PRF-7024E 1 October 1997 PERFORMANCE SPECIFICATION CALIBRATING FLUIDS, AIRCRAFT FUEL SYSTEM COMPONENTS Comments, suggestions, or questions on this document should
Certificate of Accreditation
Certificate of Accreditation ISO/IEC 17025:2005 Certificate Number L2264.03 Analysts, Inc. 2450 Hassell Road Hoffman Estates IL 60195 has met the requirements set forth in L-A-B s policies and procedures,
Crude & Petroleum Products Specification & Analysis
Training Title Crude & Petroleum Products Specification & Analysis Training Duration 5 days Training Venue and Dates Crude & Petroleum Products Specification & Analysis 5 04-08 November $3,750 Abu Dhabi
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that EPA National Vehicle and Fuel Emissions Laboratory
PETROLEUM AND PETROLEUM PRODUCTS
CHAPTER 2 PETROLEUM AND PETROLEUM PRODUCTS 2.1. PETROLEUM Petroleum is a naturally occurring mixture of hydrocarbons, generally in a liquid state, that may also include compounds of sulfur, nitrogen, oxygen,
Types of Oil and their Properties
CHAPTER 3 Types of Oil and their Properties Oil is a general term that describes a wide variety of natural substances of plant, animal, or mineral origin, as well as a range of synthetic compounds. The
SCOPE OF ACCREDITATION TO ISO GUIDE 34:2009
SCOPE OF ACCREDITATION TO ISO GUIDE 34:2009 DCG PARTNERSHIP 1, LTD. 4170 A South Main Pearland, TX 77581 Louis D Agostaro Phone: 281-648-1894 Ext. 201 REFERENCE MATERIAL PRODUCER Valid To: November 30,
Article: The Formation & Testing of Sludge in Bunker Fuels By Dr Sunil Kumar Laboratory Manager VPS Fujairah 15th January 2018
Article: The Formation & Testing of Sludge in Bunker Fuels By Dr Sunil Kumar Laboratory Manager VPS Fujairah 15th January 2018 Introduction Sludge formation in bunker fuel is the source of major operational
FEDERAL SPECIFICATION ETHER, PETROLEUM; TECHNICAL GRADE. 1.1 Scope. This specification covers technical grade petroleum ether to be used as a solvent.
METRIC 4 May 2015 SUPERSEDING O-E-751C 10 January 2003 FEDERAL SPECIFICATION ETHER, PETROLEUM; TECHNICAL GRADE The General Services Administration has authorized the use of this federal specification by
HQCEC has contracted KBC to obtain an assessment of future market and market pricing. The market study results have been used as the basis of study.
3 STUDY BASIS 3.1 Production goals of the refinery SERESCO is studying the feasibility of expanding the Refinery, and the associated utilities to support a capacity of 400 m 3 /h (60,000 barrels per day
10.6 Schedule of Accreditation
GEO-CHEM Middle East Laboratory No. ATL0015 is accredited by the GCC Accreditation Center () in accordance with the recognised International Standard, General requirements for the competence of testing
Phillips 66 Pipeline LLC. Blue Pipeline Natural Gas Liquids Specifications
Current Publication Date: 5//208 Previous Publication Date: //208 Revision Notes: Increased Propane RVP maximum from 204 psig to 208 psig. Published 4/0/208 Product Index Product Name Destination(s) NGL
Draft Indian Standard SYN GAS/ AMMONIA TURBO COMPRESSOR LUBRICATING OILS SPECIFICATION
Comments Only BUREAU OF INDIAN STANDARDS Draft Indian Standard Doc:PCD 3(2537)C September 2012 SYN GAS/ AMMONIA TURBO COMPRESSOR LUBRICATING OILS SPECIFICATION Not to be reproduced without the permission
Oil & Gas. From exploration to distribution. Week 3 V19 Refining Processes (Part 1) Jean-Luc Monsavoir. W3V19 - Refining Processes1 p.
Oil & Gas From exploration to distribution Week 3 V19 Refining Processes (Part 1) Jean-Luc Monsavoir W3V19 - Refining Processes1 p. 1 Crude Oil Origins and Composition The objective of refining, petrochemical
FINAL DRAFT BELIZE STANDARD SPECIFICATION FOR UNLEADED GASOLINE FOR MOTOR VEHICLES. ooooooooooooooooooooo
ISSUED FOR COMMENTS ONLY oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo FINAL DRAFT BELIZE STANDARD SPECIFICATION FOR UNLEADED GASOLINE FOR MOTOR VEHICLES ooooooooooooooooooooo
Appendix Refining Process of Mineral Base Oil
Appendix Refining Process of Mineral Base Oil Springer International Publishing Switzerland 2016 I. Madanhire and C. Mbohwa, Mitigating Environmental Impact of Petroleum Lubricants, DOI 10.1007/978-3-319-31358-0
Glossary: Common Terminology in Fuels and Additives
Glossary: Common Terminology in Fuels and Additives Acidity/acid number The necessary amount of potassium-hydroxide, in milligrams, used to neutralize total acid content (water soluble and insoluble) of
10.6 Scope of Accreditation
GEO-CHEM Middle East Laboratory No. ATL0015 is accredited by the GCC Accreditation Center () in accordance with the recognised International Standard, General requirements for the competence of testing
COMPRESSOR OILS HYCOM VDL T 32, 46, 68, 100, 150, 220, 320
COMPRESSOR OILS HYCOM VDL T 32, 46, 68, 100, 150, 220, 320 Special Features: It is specially blended from saturated paraffinic Group II base stocks and selected premium grade of antioxidants, anti-rust,
EAST AFRICAN STANDARD. Automotive gasoline (premium motor spirit) Specification EAST AFRICAN COMMUNITY. HS (regular); HS
EAST AFRICAN STANDARD Automotive gasoline (premium motor spirit) Specification EAST AFRICAN COMMUNITY HS 2710.11.10(regular); HS 2710.11.10(premium) ICS 75.160.20 EAS 2011 Second Edition 2011 ii Table
PSF REFORMULATED FUEL REPORT OF REFORMULATED GASOLINE UTILIZING RAW FUEL FROM FCC REFINERY UNIT
PSF REFORMULATED FUEL REPORT OF REFORMULATED GASOLINE UTILIZING RAW FUEL FROM FCC REFINERY UNIT INTRODUCTION In gasoline research speciation is a powerful tool to understand the combustion process and
PETROLEUM WAX & VASELINE PLANT
PETROLEUM WAX & VASELINE PLANT Seoul, Korea Q_iso s Activities OPTIMUM SOLUTION PROJECT MANAGEMENT FRONT-END ENGINEERING PROCESS & MECHANICAL ENGINEERING INSTALLATION & CONSTRUCTION OPERATION & MAINTENANCE
Lecture 3: Petroleum Refining Overview
Lecture 3: Petroleum Refining Overview In this lecture, we present a brief overview of the petroleum refining, a prominent process technology in process engineering. 3.1 Crude oil Crude oil is a multicomponent
Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels 1
Designation: D 6751 03a An American National Standard Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels 1 This standard is issued under the fixed designation D 6751;
1.1 Unless otherwise stated, the specification references and test methods are from the latest version in effect at the time of this contract.
(Page 1 of 6) LUBRICATING PRODUCTS MGS-92-12K 1.0 DESCRIPTION. This specification covers motor vehicle lubricating products for delivery in prepackaged containers such as drums, pails, etc., or for delivery
STUDIES ON FUSHUN SHALE OIL FURFURAL REFINING
Oil Shale, 2011, Vol. 28, No. 3, pp. 372 379 ISSN 0208-189X doi: 10.3176/oil.2011.3.02 2011 Estonian Academy Publishers STUDIES ON FUSHUN SHALE OIL FURFURAL REFINING G. X. LI, D. Y. HAN *, Z. B. CAO, M.
1 The diagram shows the separation of petroleum into fractions. gasoline. petroleum Z. bitumen. What could X, Y and Z represent?
1 The diagram shows the separation of petroleum into fractions. gasoline X Y petroleum Z bitumen What could X, Y and Z represent? 2 What is not the correct use for the fraction named? name of fraction
PRACTICE EXAMINATION QUESTIONS FOR 1.6 ALKANES (includes some questions from 1.5 Introduction to Organic Chemistry)
PRACTICE EXAMINATION QUESTIONS FOR 1.6 ALKANES (includes some questions from 1.5 Introduction to Organic Chemistry) 1. (a) Name the process used to separate petroleum into fractions....... Give the molecular
एमआरप एल ग णव नय ण य गश ल वष 2019 क लए प उ!प द# क लए भ रत य म नक QC LABORATORY INDIAN STANDARD FOR PETROLEUM PRODUCTS SPECIFICATION FOR YEAR 2019
एमआरप एल ग णव नय ण य गश ल वष 2019 क लए प उ!प द# क लए भ रत य म नक MRPL QC LABORATORY INDIAN STANDARD FOR PETROLEUM PRODUCTS SPECIFICATION FOR YEAR 2019 Page 1 of 15 BUREAU OF INDIAN STANDARDS (BIS) SPECIFICATION
1-3 Alkanes structures and Properties :
1-3 Alkanes structures and Properties : The simplest family of organic molecules is the (Alkanes). Alkanes are relatively unreactive and not often involved in chemical reactions, but they nevertheless
ISBN SANS 342:2006 Edition 4 SOUTH AFRICAN NATIONAL STANDARD Automotive diesel fuel Published by Standards South Africa 1 dr lategan roa
ISBN 0-626-18752-4 SOUTH AFRICAN NATIONAL STANDARD Automotive diesel fuel Published by Standards South Africa 1 dr lategan road groenkloof private bag x191 pretoria 0001 tel: 012 428 7911 fax: 012 344
SOUTH AFRICAN NATIONAL STANDARD
ICS 75.160.20 ISBN 0-626-17621-2 SANS 465:2005 Edition 1 SOUTH AFRICAN NATIONAL STANDARD Standard specification for denatured fuel ethanol for blending with gasolines for use as automotive spark-ignition
Production of Biodiesel from Used Groundnut Oil from Bosso Market, Minna, Niger State, Nigeria
Production of Biodiesel from Used Groundnut Oil from Bosso Market, Minna, Niger State, Nigeria Alabadan B.A. Department of Agricultural and Bioresources Engineering, Federal University, Oye Ekiti. Ajayi
Harmonized Tariff Schedule of the United States (2005) Annotated for Statistical Reporting Purposes
CHAPTER 27 MINERAL FUELS, MINERAL OILS AND PRODUCTS OF THEIR DISTILLATION; BITUMINOUS SUBSTANCES; MINERAL WAXES 27-1 Notes 1. This chapter does not cover: (a) (b) Separate chemically defined organic compounds,
DIESEL FUEL 8.1. INTRODUCTION
CHAPTER 8 DIESEL FUEL 8.1. INTRODUCTION Kerosene, diesel fuel, and aviation turbine fuel (jet fuel) are members of the class of petroleum products known as middle distillates (Gruse and Stevens, 1960;