Annex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005
|
|
- Jeremy Gallagher
- 6 years ago
- Views:
Transcription
1 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005 Period of validity: to Holder of certificate: Jürgen Egly zerstörungsfreie Werkstoffprüfung Siemensstraße 33, Frankenthal Tests in the fields: manual non destructive testing (radiographic, ultrasonic, penetrant, magnetic particle, visual testing) and mobile hardness tests at metallic materials of metallurgical and metal working plant as well as in system engineering and plant technology, structural steel and bridge construction and in pipeline construction Abbreviations used: see last page The laboratory is permitted, without being required to inform and obtain prior approval from DAkkS, to use standard test methods listed here with different issue dates or revision status updates. The laboratory maintains a current list of all test methods in a flexible scope of accreditation. 1 Radiographic testing DIN EN DIN EN 1435 DIN EN ISO Non destructive testing General principles for the radiographic examination of metallic materials using X rays and gamma rays Radiographic testing of welded joints Radiographic testing Part 1: X and gamma ray techniques with film This document is a translation. The definitive version is the original German annex to the accreditation certificate. 1/7
2 DIN EN ISO DIN EN Non destructive testing of steel tubes Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections Founding Radiographic examination DIN EN DIN EN DIN EN Non destructive examination of welds Radiographic examination of welded joints Acceptance levels Part 1: Evaluation of welded joints in steel, nickel, titanium and their alloys by radiography Acceptance levels Non destructive testing of welds Part 2: Evaluation of welded joints in aluminium and its alloys by radiography Acceptance levels 2 Ultrasonic testing DIN EN DIN EN DIN EN DIN EN DIN EN DIN EN 1714 Non destructive testing Ultrasonic examination Part 1: General principles Non destructuve testing Ultrasonic examination Part 2: Sensitivity and range setting Non destructive testing Ultrasonic testing Part 3: Transmission technique Non destructive testing Ultrasonic examination Part 4: Examination for discontinuities perpendicular to the surface Non destructive testing Ultrasonic examination Part 5: Characterization and sizing of discontinuities testing of welded joints Period of validity: to Translation 2/7
3 DIN EN DIN EN DIN EN DIN EN DIN EN DIN EN DIN EN DIN EN Ultrasonic testing of steel flat product of thickness equal to or greater than 6 mm (reflection method) Non destructive testing of steel forgings Part 3: Ultrasonic testing of ferritic or martensitic steel forgings Non destructive testing of steel forgings Part 4: Ultrasonic testing of austenitic and austenitic ferritic stainless steel forgings Non destructive testing Ultrasonic testing of steel bars Founding Ultrasonic examination Part 1: Steel castings for general purposes Founding Ultrasonic examination Part 2: Steel castings for highly stressed components Founding Ultrasonic testing Part 3: Spheroidal graphite cast iron castings Non destructive testing Ultrasonic thickness measurement DIN EN ISO DIN EN 1712 DIN EN ISO DIN EN 1713 DIN EN ISO testing Techniques, testing levels, and assessment testing of welded joints Acceptance levels testing Acceptance levels testing Characterization of indications in welds testing Characterization of indications in welds Period of validity: to Translation 3/7
4 3 Liquid penetrant testing DIN EN ISO DIN EN DIN EN DIN EN DIN EN DIN EN ISO Non destructive testing Penetrant testing Part 1: General principles Non destructive testing Penetrant testing Part 1: General principles Founding Liquid penetrant testing Part 1: Sand, gravity die and low pressure die castings Founding Liquid penetrant inspection Part 2: Investment castings Non destructive testing of steel forgings Part 2: Penetrant testing Non destructive testing of steel tubes Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections DIN EN ISO DIN EN 1289 Penetrant testing of welds Acceptance levels Penetrant testing of welds Acceptance levels 4 Magnetic particle testing DIN EN ISO DIN EN ISO DIN EN 1290 Non destructive testing Magnetic particle testing Part 1: General principles Magnetic particle testing Magnetic particle testing of welds Period of validity: to Translation 4/7
5 DIN EN DIN EN DIN EN ISO Founding Magnetic particle testing Non destructive testing of steel forgings Part 1: Magnetic particle inspection Non destructive testing of steel tubes Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections DIN EN ISO DIN EN 1291 Magnetic particle testing of welds Acceptance levels Magnetic particle testing of welds Acceptance levels (withdrawn standard) 5 Visual testing DIN EN ISO DIN EN DIN EN Visual testing of fusion welded joints Non destructive testing Visual testing General principles Non destructive examination of fusion welds Visual examination 6 Cross standards for NDT DIN EN DIN EN DIN EN Delivery requirements for surface condition of hot rolled steel plates, wide flats and sections Part 1: General requirements Delivery requirements for surface conditions of hot rolled steel plates, wide flats and sections Part 2: Plate and wide flats Delivery requirements for surface condition of hot rolled steel plates, wide flats and sections Part 3: Sections Period of validity: to Translation 5/7
6 DIN EN DIN EN DIN EN AD 2000 Merkblatt HP 5/ ASME Code, Section V 2010 DIN EN DIN EN ISO DIN EN DIN Metallic industrial piping Part 5: Inspection and testing Water tube boilers and auxiliary installations Part 5: Workmanship and construction of pressure parts of the boiler Water tube boilers and auxiliary installations Part 6: Inspection during construction documentation and marking of pressure parts of the boiler Manufacture and testing of joints Non destructive testing of welded joints ASME Boiler and Pressure Vessel Code Section V Nondestructice Examination Subsection A: Article 1: General Requirements Article 2: Radiographic Examination Article 4: Ultrasonic Examination Methods for welds Article 5: Ultrasonic Examination Methods for materials Article 6: Liquid Penetrant Examination Article 7: Magnetic Particle Examination Article 9: Visual Examination Subsection B: Article 22: Radiographic Standards Article 23: Ultrasonic Standards Article 24: Liquid Penetrant Standards Article 25: Magnetic Particle Standards General rules for metallic materials General rules for metallic materials Founding Technical conditions of delivery Part 2: Additional requirements for steel castings Technical delivery conditions for castings made from metallic materials steel castings classification into severity levels on the basis of non destructive testing Period of validity: to Translation 6/7
7 DIN DIN EN DIN EN DIN EN ISO Technical delivery conditions for castings of metallic materials supplementary requirements for steel castings used for heavyduty valves Execution of steel structures and aluminium structures Part 2: Technical requirements for steel structures Unfired pressure vessels Part 5: Inspection and testing Welding and allied processes Classification of geometric imperfections in metallic materials Part 1: Fusion welding 7 Hardness testing DIN Metallic materials Hardness testing with the UCI method Part 1: Test method Abbreviations used: AD HP ASME DIN Working group of pressure vessels; Production and testing American Society of Mechanical Engineers German Institute for Standardization Period of validity: to Translation 7/7
Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17579-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 07.07.2017 to 06.07.2022 Holder of certificate: gammatest
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11065-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 08.02.2016 to 07.02.2021 Holder of certificate: Actemium
More informationAnnex to the Accreditation Certificate D IS according to DIN EN ISO/IEC 17020:2012
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D IS 14153 02 01 according to DIN EN ISO/IEC 17020:2012 Period of validity: 16.04.2015 to 14.04.2020 Date of issue: 16.04.2015
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11272-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 18.10.2017 to 17.10.2022 Holder of certificate: VDZ
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18869-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 30.08.2013 to 29.08.2018 Holder of certificate: ilf
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH German Accreditation Body Annex to the Accreditation Certificate D-PL-20591-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 14.08.2017 to 13.08.2022
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17453-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 03.07.2017 to 02.07.2022 Holder of certificate: SPIE
More informationAnnex of the Certificate (Page 1/5) Scope of Accreditation
Annex of the Certificate (Page 1/5) As a "Type A" Inspection Body Address : Esas Maltepe Ofispark Altayçeşme Mah. Çamlı Sokak No:21 Kat:8 Maltepe 34843 İSTANBUL/TÜRKİYE Phone : +90 216 518 40 50 Fax :
More informationManufacturing Instructions Blank parts and semi-finished products
May 2016 Manufacturing Instructions Blank parts and semi-finished products SN 200-2 ICS 25.020 Dimensions in mm Supersedes SN 200-2:2010-09 Table of contents Page 1 Scope... 2 2 Normative references...
More informationAnnex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 11140 18 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 06.11.2014 to 05.11.2019 Holder of certificate: Fraunhofer
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11057-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 20.06.2014 to 19.06.2019 Holder of certificate: OELCHECK
More informationAnnex of the Certificate (Page 1/4) Scope of Accreditation
Annex of the Certificate (Page 1/4) As a "Type A" Inspection Body Address : Keresteciler Sitesi E Blok No:5 Kat:2 Ostim / Yenimahalle 06170 ANKARA/TÜRKİYE Phone : +90 312 385 95 30 Fax : +90 312 386 00
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-20575-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 2018-03-05 to 2021-07-28 Holder of certificate: innogy
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL18398-02-01 according to DIN EN ISO/IEC 17025:2005 Period of validity: 26.02.2018 to 25.02.2023 Holder of certificate: SAL
More informationAnnex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 20281 01 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 31.08.2016 to 30.08.2021 Holder of certificate: Deutsche
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17435-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 30.09.2016 to 08.12.2018 Holder of certificate: k3works
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11321-02-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 20.12.2016 to 19.12.2021 Holder of certificate: TÜV
More informationSTANDARDS and SPECIFICATIONS
ANSI (American National Standards Institute) ANSI B31.4 - Liquid petroleum transportation piping system. ANSI B31.4 - Gas transmission and distribution piping system. API (American Petroleum Institute)
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11109-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 13.06.2018 to 22.06.2020 Holder of certificate: TÜV
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11125-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 31.07.2017 to 30.07.2022 Holder of certificate: DIN
More informationAnnex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 11238 01 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 09.02.2016 to 08.02.2021 Holder of certificate: ContiTech
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 DURHAM HOLDINGS CORPORATION INC. DBA MME TESTING 1039 Industrial Court Suwanee, GA 30024 Danny Collazo Phone: 678 730 2000 MECHANICAL Valid To: October 31,
More informationULTRASONIC EXAMINATION
Page 1 of 9 ULTRASONIC EXAMINATION PROCEDURE Doc. No. KNS/UT/01.REV 0 Page: 9 of 9 Date: 15.09.2012 ULTRASONIC EXAMINATION PROCEDURE PREPARED & APPROVED BY NDE- Level III CERTIFIED BY REVIEWED BY Page
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17435-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 06.12.2017 to 08.12.2018 Holder of certificate: k3works
More informationGALLI&CASSINA. Plug Valves. Conical
Conical Plug Pressure Balanced Type UPPER HOLE LOWER HOLE The Pressure Balanced Plug Contains 2 Holes: The Upper Holes Connects the Plug Port with the Area Above Plug. The Lower hole Maintains Pressure
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
eutsche Akkreditierungsstelle Gmb Annex to the Accreditation Certificate -PL-19399-01-00 according to IN EN ISO/IEC 17025:2005 ate of issue: 29.11.2018 older of certificate: Inspectorate eutschland Gmb
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-19722-01-00 according to DIN EN ISO/IEC 17025:2005 Holder of certificate: Institut für Lacke und Farben Magdeburg ggmbh Fichtestraße
More information5.0 REACTOR COOLANT SYSTEM AND CONNECTED SYSTEMS
Summary Description 5.0 REACTOR COOLANT SYSTEM AND CONNECTED SYSTEMS This chapter of the U.S. EPR Final Safety Analysis Report (FSAR) is incorporated by reference with supplements as identified in the
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-20258-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 2016-02-02 to 2021-02-01 Holder of certificate: Amphenol-Tuchel
More information2004 ASME BOILER & PRESSURE VESSEL CODE
2004 ASME BOILER & V PRESSURE VESSEL CODE AN INTERNATIONAL CODE NONDESTRUCTIVE EXAMINATION ASME BOILER AND PRESSURE VESSEL CODE AN INTERNATIONAL CODE V NONDESTRUCTIVE EXAMINATION 2004 Edition July 1, 2004
More informationDÜRR NDT GmbH & CO. KG Höpfigheimer Straße Bietigheim-Bissingen
Evaluation of the image quality of a radiographic film emulsion AGFA D7 exposed by X-rays and developed by machine processing (8 min cycle time at 29 C) using Dürr NDT XR D-6 NDT developer and XR F-6 NDT
More informationAccreditation. a'1" ul. ( oar.hl,.n" Deutsche Akkreditieru ngsstelle G m bh. Y,/.,n" r,nn" Head of Division
( oar.hl,.n" Akkreditieru ngsstel le Deutsche Akkreditieru ngsstelle G m bh Entrusted according to Section 8 subsection 1 AkkStelleG in connection with Section 1 subsection 1 AkkStellecBV Signatory the
More informationTOFD on Weld Seams. New Prestandard CEN/TS : professional customer focused cost aware. ECNDT 2006 Berlin, September 2006 We.2.7.
professional customer focused cost aware New Prestandard CEN/TS 14751 : TOFD on Weld Seams ECNDT 2006 Berlin, 25.-29. September 2006 We.2.7.2 Dr.-Ing. Andreas Hecht Plant Inspection / Materials Engineering
More informationInformation for the Certification of Weld Shops in Rail Vehicle Construction According to DIN EN
Information for the Certification of Weld Shops in Rail Vehicle Construction According to DIN EN 15085-2 Certificate According DIN EN 15085-2 Railway applications - Welding of railway vehicles and components
More informationAnnex to the accreditation certificate D-PL according to DIN EN ISO/IEC 17025: and council directives 90/385/EWG 2 and 93/42/EWG 3
Deutsche Akkreditierungsstelle GmbH Annex to the accreditation certificate D-PL-13422-01-02 according to DIN EN ISO/IEC 17025:2005 1 and council directives 90/385/EWG 2 and 93/42/EWG 3 Period of validity:
More informationAccreditation. Deutsche Akkreditierungsstelle GmbH hereby confirms that the testing laboratory
Entrusted pursuant to 8 (1) of the German Accreditation Body Act (AkkStelleG) in conjunction with 1 (1) of the Regulation on the Entrustment of the Accreditation Body (AkkStelleGBV) Accreditation Deutsche
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18137-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 19.03.2018 to 18.03.2023 Holder of certificate: Continental
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18192-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 15.11.2017 to 14.11.2022 Holder of certificate: ITAP
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025: and the Directive 93/42/EEC 2 and 90/385/EEC 3
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-13412-01-02 according to DIN EN ISO/IEC 17025:2005 1 and the Directive 93/42/EEC 2 and 90/385/EEC 3 Indefinite since: 10.12.2018
More informationBroetje-Automation Company Standard Structural component specification for welded parts
Broetje-Automation Company Standard Table of Contents Application Area and Purpose 3 1 Structural components pursuant to DIN 1090 4 1.1 Structural component classification 4 1.1.1 Steel components < Strength
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-12095-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 2015-07-16 to 2019-03-06 Holder of certificate: Weidmüller
More informationEU RO Mutual Recognition Technical Requirements
1. PRODUCT DESCRIPTION... 1 2. DESIGN EVALUATION... 2 3. PRODUCTION REQUIREMENTS... 5 4. MARKING REQUIREMENTS... 6 5. TYPE APPROVAL CERTIFICATE CONTENT... 6 6. APPROVAL DATE AND REVISION NUMBER... 6 7.
More informationM-18 Controllable-Pitch Propeller
Guideline No.M-18(201510) M-18 Controllable-Pitch Propeller Issued date: 20 th October, 2015 China Classification Society Foreword This Guideline is a part of CCS Rules, which contains technical requirements,
More informationPIPE LOG BOOK. Project no:... Project:... Construction section:... On behalf of:... Commissioned by:... Order no:... Date:... Construction period:...
FW-FERNWÄRME-TECHNIK GmbH Grafftring 2-6 D-29227 Celle Tel.: + 49 5141 888 88-0 Fax: + 49 5141 888 88-22 E-Mail: info@fw-gmbh.de Internet: www.fw-gmbh.de PIPE LOG BOOK... Project:... Construction section:...
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate DPL110551000 according to DIN EN ISO/IEC 17025:2005 Period of validity: 20140612 to 20160711 Date of issue: 20140612 Holder of
More informationTAM International, Inc. QI Visible Magnetic Particle Inspection
TAM International, Inc. QI-8.2.4-12 Visible Magnetic Particle Inspection Approved by Quality Assurance Manager Signature/Date: Greg Fletcher Reviewed by Sr. Quality Analyst Signature/Date: Thomas Young
More informationISO INTERNATIONAL STANDARD. Petroleum and natural gas industries Packaged reciprocating gas compressors
INTERNATIONAL STANDARD ISO 13631 First edition 2002-08-01 Petroleum and natural gas industries Packaged reciprocating gas compressors Industries du pétrole et du gaz naturel Unités de compresseurs alternatifs
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-19065-04-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 2017-05-11 to 2022-05-10 Date of issue: 2017-05-11
More informationPTV TECHNICAL PRESCRIPTIONS. ELASTOMERIC SEALS: Part 1: Vulcanized Rubber FOR. Impartial institute for the monitoring of construction products
PTV 8681-1 TECHNICAL PRESCRIPTIONS TECHNICAL PRESCRIPTIONS FOR ELASTOMERIC SEALS: Part 1: Vulcanized Rubber COPRO vzw Version 1.0 dated 2017-10-17 Impartial institute for the monitoring of construction
More informationSound-absorbing spacer Sorp10
Sponsor: Reference number: 7.3 / 27080 This document is only a translated version; not legally attested Max Frank GmbH & Co. KG Mitterweg 1 94339 Leiblfing Federal Institute for Materials Research and
More informationPrevention vs. Reaction The Importance of Asset Integrity
Prevention vs. Reaction The Importance of Asset Integrity How Your Assets Typically Age Inspections Potential Failure Condition Functional Failure Time P-F Interval Why is Asset Integrity so Important?
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025: and the Directive 93/42/EEC 2 and 90/385/EEC 3
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18398-02-02 according to DIN EN ISO/IEC 17025:2005 1 and the Directive 93/42/EEC 2 and 90/385/EEC 3 Period of validity: 26.02.2018
More informationGuideline of the Railway Vehicles Coordination Committee (Draft Guideline DVS 1619)
Guideline of the Railway Vehicles Coordination Committee (Draft Guideline DVS 1619) Procedure for the certification of welding manufacturers for welding railway vehicles and components according to DIN
More informationDeutsche Akkreditierungsstelle GmbH
(( DAk~~"h' Akkreditierungsstelle Deutsche Akkreditierungsstelle GmbH Entrusted according to Section 8 subsection 1 AkkStelleG in connection with Section 1 subsection 1 AkkStelleGBV Signatory to the Multilateral
More informationEU Declaration of conformity
EU Declaration of conformity Confirm with the Directive 2006/42/EC: of the European Parliament and of the Council of 17 May 2006 on the approximation of the laws of the Member States relating to machinery
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-19065-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 2017-11-22 to 2022-11-21 Date of issue: 2017-11-22
More informationGuideline No.: E-03(201806) E-03 MOTORS. Issued date: June 7, China Classification Society
Guideline No.: E-03(201806) E-03 MOTORS Issued date: June 7, 2018 China Classification Society Foreword: This Guideline is a part of CCS Rules, which contains technical requirements, inspection and testing
More informationANSI Valve Standards. API Valve Standards
ANSI Valve s ANSI - the American National s Institute standardization and conformity assessment system. Code Name ANSI A126 ANSI A181 ANSI 816.10 ANSI 816.34 ANSI 8127.1 Grey iron castings for valves flanges
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11035-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 13.02.2018 to 12.02.2023 Holder of certificate: DMT
More informationPeriod of validity: to Date of issue:
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11190-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 09.03.2017 to 02.02.2020 Holder of certificate: TÜV
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18869-01-00 according to DIN EN ISO/IEC 17025:2005 Holder of certificate: ilf Forschungs- und Entwicklungsgesellschaft Lacke
More informationStandards Pertaining to Valves Used in the Oil & Gas Industry
PDHonline Course M159 (2 PDH) Standards Pertaining to Valves Used in the Oil & Gas Industry Instructor: Peter Smith, HNC (Mech) 2012 PDH Online PDH Center 5272 Meadow Estates Drive Fairfax, VA 22030-6658
More informationEN-painelaitestandardien tilannekatsaus
1 (9) EN-painelaitestandardien tilannekatsaus Teknisten komiteoiden CEN/TC 54, 74, 267, 268, 269 ja 342 julkaisut ja työkohteet. Keltaisella on merkitty viime tilannekatsaukseen nähden muuttuneet tiedot.
More informationGeneral Technical Approval
General Technical Approval German approval body for construction products and types of construction Construction Testing Authority Authority of the German Länder Governments for a uniform fulfilment of
More informationGuideline No.: E-03(201610) E-03 MOTORS. Issued date: October 28,2016. China Classification Society
Guideline No.: E-03(201610) E-03 MOTORS Issued date: October 28,2016 China Classification Society Foreword: This Guideline is a part of CCS Rules, which contains technical requirements, inspection and
More informationMSC Guidelines for Fired Thermal Fluid Heaters Procedure Number: E1-28 Revision Date: 06/11/2014
References P. W. Gooding, Chief of Engineering Division a. 46 CFR Part 52 Power Boilers b. 46 CFR Part 54 Pressure Vessels c. 46 CFR Part 63 Automatic Auxiliary Boilers Contact Information If you have
More informationForged 3 Piece Trunnion Mounted Ball Valves Series PL
Forged 3 Piece Trunnion Mounted Ball Valves Series PL Construction: 3 piece bolted side entry Trunnion housings 4 Trunnion retainer plates 6 Standard single piece seating SPE & DPE Special scraping 3 piece
More informationPrice List 2013 In-House Repairs and Calibration
In-House Repairs and Calibration Contents Page 2: Services Page 3: Repair and Certification Packages for Accumulators Page 4: Repair packages for Compact Hydraulics Power Units Page 5: Repair and Inspection
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ELEMENT CLEVELAND 5405 East Schaaf Road Cleveland, OH 44131 Jeffry J Smith Phone: 216 524 1450 Jeffry.Smith@element.com MECHANICAL Valid To: October 31, 2018
More informationGuideline No.: E-04(201610) E-04 GENERATORS. Issued date: October 28,2016. China Classification Society
Guideline No.: E-04(201610) E-04 GENERATORS Issued date: October 28,2016 China Classification Society Foreword: This Guideline is a part of CCS Rules, which contains technical requirements, inspection
More informationFigures T Basic Calibration Block T Straight Beam Calibration Blocks for Bolting
A02 ARTICLE 5 T-510 Scope... 102 T-520 General... 102 T-521 Basic Requirements... 102 T-522 Written Procedure Requirements... 102 T-530 Equipment... 102 T-531 Instrument... 102 T-532 Search Units... 102
More informationKKAI Report No Rev 1 Prepared for BioHeatUSA April 28, 2009
1. Summary... 3 2. Background... 3 3. Scope... 3 4. European Suppliers... 4 5. Materials... 4 6. Design... 4 7. Fabrication... 5 8. Examination... 6 9. Inspection... 6 10. Testing... 8 11. Quality Control
More informationIndustry 4.0 Is Unthinkable Without Calibration!
Industry 4.0 Is Unthinkable Without Calibration! The much-discussed Industry 4.0 cannot be implemented without a clear increase in automation solutions. At the same time, this development necessitates
More informationMSC Guidelines for Fired Thermal Fluid Heaters Procedure Number: E1-28 Revision Date: April 20, 2018
References C. J. Robuck, LCDR, Chief, Engineering Division a. 46 CFR Part 52 Power Boilers b. 46 CFR Part 54 Pressure Vessels c. 46 CFR Part 63 Automatic Auxiliary Boilers Contact Information If you have
More informationFUNDAMENTAL SAFETY OVERVIEW VOLUME 2: DESIGN AND SAFETY CHAPTER E: THE REACTOR COOLANT SYSTEM AND RELATED SYSTEMS
PAGE : 1 / 13 4. PRESSURISER 4.1. DESCRIPTION The pressuriser (PZR) is a pressurised vessel forming part of the reactor coolant pressure boundary (CPP) [RCPB]. It comprises a vertical cylindrical shell,
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationEN-painelaitestandardien tilannekatsaus
1 (10) EN-painelaitestandardien tilannekatsaus Teknisten komiteoiden CEN/TC 54, 74, 267, 268, 269 ja 342 julkaisut ja työkohteet. Keltaisella on merkitty viime tilannekatsaukseen (18.4.2018) nähden muuttuneet
More informationSpecial Projects. Pump Modules. Fluid complete solutions from the KRAL brand. s i n c e PUMPS.
Pump Modules. Fluid complete solutions from the KRAL brand. PREMIUM MANUFACTURER s i n c e 1 9 5 0 PUMPS www.kral.at Expertise and Experience. KRAL AG is a leading company in the field of pump and flow
More informationDetection and evaluation of rail defects with nondestructive
19 th World Conference on Non-Destructive Testing 2016 Detection and evaluation of rail defects with nondestructive testing methods Anika DEY 1, Jochen KURZ 2, Lukasz TENCZYNSKI 3 1 DB Systemtechnik GmbH
More informationSVENSK STANDARD SS-EN Järn och stål Ultraljudprovning av H-profil med parallella flänsar samt IPE-profil
SVENSK STANDARD SS-EN 10306 Fastställd 2002-01-18 Utgåva 1 Järn och stål Ultraljudprovning av H-profil med parallella flänsar samt IPE-profil Iron and steel Ultrasonic testing of H beams with parallel
More informationAIR LUBRICATION SYSTEM INSTALLATION
Guide for Air Lubrication System Installation GUIDE FOR AIR LUBRICATION SYSTEM INSTALLATION OCTOBER 2018 American Bureau of Shipping Incorporated by Act of Legislature of the State of New York 1862 2018
More informationHopkinsons CONTENTS SCHEDULE OF SHELL BOILER MOUNTINGS. Hopkinsons. Safety Valves 5. Boiler Stop Valves 17. Feed Check Valves 18. Blowdown Valves 20
Hopkinsons SCHEDULE OF SHELL BOILER MOUNTINGS Quality assurance Weir Power & Industrial operates quality programmes to cover the full scope of their activities. Comprehensive quality systems have been
More informationCOmpOnEntS. Components WOrldWidE
the EnGinE people EnGinE Engine COmpOnEntS Components WOrldWidE Worldwide quality Made in GerMany With more than 50 years of experience, SECO has an exceptional long tradition in the manufacturing of large
More informationtechnical description:
The steel flanged and welded swing check valves are the pipeline valves, preventing automatically a working medium from the back flow. They are used for: - noncorrosive fluids - water - steam - oil - petroleum
More informationSFI SPECIFICATION 1.1 EFFECTIVE: NOVEMBER 9, 2001 *
SFI SPECIFICATION 1.1 EFFECTIVE: NOVEMBER 9, 2001 * PRODUCT: Replacement Flywheels and Clutch Assemblies 1.0 GENERAL INFORMATION 1.1 This SFI Specification establishes uniform test procedures and minimum
More informationUSER INFORMATION, CURRENT RULE CHAPTERS AND INDEX
RULES FOR CLASSIFICATION OF Ships MAIN CHANGES JANUARY 2013 General A complete list of current rule chapters including revision dates is presented in Pt.0 Ch.1 Sec.2. The listing below contains only chapters
More informationOUR ASSETS OUR SCOPE OF SUPPLY. Ball Valves Gate Valves Globe Valves Control Valves Check Valves Butterfly Valves Plug Valves Special Valves
Driving Energy Since its establishment, Ringo Válvulas has designed and manufactured its own cast and forged valves. Our experience over 30 years on the valve industry is the key of our success and recognition,
More informationAcoustic Emission Inspection and Monitoring of Petroleum Storage Tanks and Piping
Acoustic Emission Inspection and Monitoring of Petroleum Storage Tanks and Piping Increased Safety with Excellent Money Saving Petroleum tanks used to store crude oil, aviation fuel, gasoline, diesel and
More informationM-11 MARINE DIESEL ENGINE FUEL INJECTOR
Guideline No.M-11(201510) M-11 MARINE DIESEL ENGINE FUEL INJECTOR Issued date: 20 October 2015 China Classification Society Foreword This Guideline constitutes the CCS rules, and establishes the applicable
More informationProduct Catalogue2015 NORDIC QUALITY, PRECISION, DEPENDABILITY AND KNOW-HOW
Product Catalogue2015 NORDIC QUALITY, PRECISION, DEPENDABILITY AND KNOW-HOW 2 Your specialist in welded stainless steel tubular products 3 Welded Stainless Steel Tubular products for every need 4 Content
More informationTHE FUTURE NEEDS STEEL
THE FUTURE NEEDS STEEL Schmiedewerke Gröditz GmbH produces open-die forgings and seamless rolled ring products which can be supplied either rough or finish-machined on request. And in this way it pursues
More informationOVERALL INSPECTION AND INTEGRITY ASSESSMENT OF OIL AND OIL PRODUCTS STORAGE TANKS R.S.
OVERALL INSPECTION AND INTEGRITY ASSESSMENT OF OIL AND OIL PRODUCTS STORAGE TANKS R.S. Gaspariants., G.A. Giller (JSC VNIIST, RUSSIA) L.Y. Mogilner., Y.Y. Semin (CJSC VNIIST-Diagnostika, RUSSIA) Steel
More informationSTAINLESS STEEL HOUSINGS WITH CERAMIC MEMBRANES
STAINLESS STEEL HOUSINGS WITH CERAMIC MEMBRANES STAINLESS STEEL HOUSINGS WITH CERAMIC MEMBRANES modules in industrial design 52 mm 41 mm 25.4 mm Membrane diameter Membrane design 7/6 19/3.3 37/2 19/6 37/3.8
More informationDIN EN : (E)
DIN EN 13480-3:2017-12 (E) Metallic industrial piping - Part 3: Design and calculation Contents Page European foreword... 10 1 Scope... 12 2 Normative references... 12 3 Terms, definitions, symbols and
More informationHigh performance valves for high level expectations PROUDLY MADE IN ITALY
High performance valves for high level expectations Location ERREESSE, established in 2004, is a manufacturing company based in the Northern Italy, Grignasco, a nice town in the green Valsesia (Sesia Valley),
More informationGuideline No.M-10(201510) M-10 Marine Diesel Engine Fuel Injection Pump
Guideline No.M-10(201510) M-10 Marine Diesel Engine Fuel Injection Pump Issued date: 20 th October, 2015 China Classification Society Foreword This Guideline is a part of CCS Rules, which contains technical
More informationReamers - Hand - Machine (Morse Taper & Chucking) - Bridge - Taper Pin - Morse Taper Socket - Taper Pipe - Adjustable
REAMERS Reamers - Hand - Machine (Morse Taper & Chucking) - Bridge - Taper Pin - Morse Taper Socket - Taper Pipe - Adjustable the ultimate reference book is here... BLACK BOOK The ultimate reference book:
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32159-8 Any reference to SABS 1551-1 is deemed to be a reference to this standard (Government Notice No. 1373 of 8 November 2002) SOUTH AFRICAN NATIONAL STANDARD Check valves (flanged and
More informationDatasheet. control line. e109 - September Manufacturing Range. Experience. Applications. Production Facilities
Datasheet Experience The Oil & Gas sector represents one of Fine Tubes principal markets for supply of a wide range of tubular product forms and materials. Our products have been successfully used in some
More informationIndustry 4.0 Is Unthinkable Without Calibration!
Industry 4.0 Is Unthinkable Without Calibration! Improved plant availability through regular sensor calibration The much-discussed Industry 4.0 cannot be implemented without a clear increase in automation
More information