Schedule of Accreditation issued by United Kingdom Accreditation Service High Street, Feltham, Middlesex, TW13 4UN, UK
|
|
|
- Bridget Cook
- 5 years ago
- Views:
Transcription
1 Unit A Shears Way Brooklands Close Sunbury-on-Thames Middlesex TW16 7EE Contact: Mr Craig Stone Tel: +44 (0) Fax: +44 (0) craig.stone@intertek.com Website: SUMMARY OF ACCREDITATION CHEMICALS & CHEMICAL PRODUCTS Organic chemicals & products Chemical & physical ENVIRONMENTAL SAMPLES Leachates Organic extractables Water, process Metals FUELS, OILS & LUBRICANTS Petroleum products & lubricants/oils/ greases Acidity/alkalinity/acid base number/ basicity/conductivity/neutralisation value/ph Ageing/corrosiveness/oxidation/ storage stability/air release value Appearance/colour/haze/miscibility/ odour/refractive index Asphaltene Boiling range/distillation/vapour pressure Carbon content/carbon(ate) residue/ char value/residue/iodine value Cloud/fire/burning/handling/pour point Demulsification number Distillation vapour pressure Elemental analysis Filterablity/filter blocking/plugging/ pumpability Flash/freezing/melting/evaporation/ smoke point Foaming characteristics/saponification Hydrocarbon types Metals/solids/particulates/sediment salt Other tests Sediment Specific gravity/viscosity Sulphur/sulphurated ash/hydrogen sulphide Water content/water reaction/washout characteristics Waxing/dewaxing Assessment Manager: PB (TestPerm_034) Page 1 of 7
2 DETAIL OF ACCREDITATION PRODUCTS Chemical and Physical Tests Acidity of petroleum products *IP-ASTM Joint Methods MT/FLC/06 Air saturated vapour pressure IP 394/01 Aromatic hydrocarbons IP 391/01 Aromatic hydrocarbon types in aviation fuels by HPLC with RI IP 436/01*ASTM D Asphaltenes - heptane insolubles IP 143/04(04)*ASTM D Basic nitrogen content of lubricant base oils IP 276/95 (mod) Boiling range of products IP 406/99*ASTM D IP 480/02 IP 507/04 IP PM-CF/98 Calculation of viscosity index from kinematic viscosity Carbon residue of petroleum products (micro method) Cloud point of petroleum oils: (Auto) (Manual) (Manual) Cold filter plugging point of distillate fuels IP 226/04*ASTM D (98) ASTM D ASTM D ASTM D IP 219/94(04) IP 309/99 Colour (ASTM rating) ASTM D Colour ratings of aviation turbine fuels IP 216/97(04) (Annex B) Colour stability of kerosine and light gas oil products Composition of aliphatic and aromatic hydrocarbons MT/FLC/01 Documented In-House Method using Mass Spectrometry MT/CMS/12 Assessment Manager : PB (TestPerm_034) Page 2 of 7
3 Copper corrosion from petroleum products by the copper strip tarnish test Crude oil - heptane insolubles Density and relative density of liquids by digital density meter De-waxing raffinates Dialysis and separation of lubricants Distillation of crude petroleum using Fischer 800 distillation units IP 154/00*ASTM D130-94(2000)el ISO 2160:1998 IP 143/01 (modified) IP 365/97(04) ASTM D (2002)el MT/FLC/03 MT/FLC/11 ASTM D a Distillation of petroleum products IP 123/01 ASTM D86-04b Doctor test IP 30/92(04) Electrical conductivity of aviation and distillate fuels containing a static dissipater additive IP 274/99*ASTM D Existent gum in fuels by jet evaporation IP 131/99*ASTM D Filter flow of aviation fuels at low temperatures Filtration time ASTM D a (2004) el IP 422/96(04) MIL-T-83133E Flashpoint by Abel closed cup IP 170/99 Flash point by Pensky-Martens closed tester Freezing point of aviation fuels (automated optical method) Freezing point of aviation fuels (Manual Methods) Furfural extraction of waxy distillates Heat of combustion (net) of aviation fuels IP 34/03*ASTM D93-02 ASTM D IP 16/98(04) ASTM D MT/FLC/04 ASTM D Assessment Manager : PB (TestPerm_034) Page 3 of 7
4 Hydrocarbon types and oxygenates in petrol-multi dimensional gas chromatographic method Hydrocarbon types in liquid petroleum products by Fluorescent Indicator Absorption EN IP 156/04*ASTM D Icing inhibitor in ATK by HPLC IP (04) Kinematic viscosity of transparent and opaque liquids and the calculation of dynamic viscosity IP 71Section 1/97*ASTM D IP71 Section 2/95(04)*ASTM D Lead in gasoline by X-ray spectrometry IP 228/72(04) Mercaptan sulphur in gasoline, kerosene, aviation turbine and distillate fuels (potentiometric method) Naphthalene hydrocarbons in aviation turbine fuels by UV spectrophotometry Neutralisation number by colour indicator titration Neutralisation number - potentiometric titration method Oxidation stability of aviation fuels, potential residue method Oxidation stability of gasoline, induction period method Particulate contaminant of aviation turbine fuels: by line sampling by laboratory filtration Polycyclic aromatics in base oils by dimethylsulphoxide-refractive index method IP 342/00*ASTM D ASTM D IP 139/98(04)*ASTM D IP 177/96(04)*ASTM D IP 138/02 ASTM D IP 40/97(04)*ASTM D IP 216/97(04) (Annexe A & Annexe B)* ASTM D IP 423/99*ASTM D MT/CMS/07 Assessment Manager : PB (TestPerm_034) Page 4 of 7
5 Pour point: (Manual) (Auto) Quantitative analysis for chlorine, lead, nickel and vanadium Qualitative and quantitative analysis to determine composition: Aliphatic hydrocarbons Oxygenated compounds Refraction index of hydrocarbon liquids Saturated aromatic and polar compounds by TLC with FI detection ASTM D97-04 ASTM D Wavelength Dispersive X-ray Fluorescence MT/ELE/07, 05 and 06 Documented In-House Method using gas chromatography techniques including capillary and multicolumn systems, on-column injection and Flame Ionisation MT/CMS/03 MT/FLC/02 IP 469/01 Smoke point of aviation turbine fuels IP 57/95(03) ASTM D (2002)el Sulphur ASTM D ISO 14596:1988 IP 447/99 Sulphur in petroleum products by energy-dispersive X-ray fluorescence TBN of petroleum products by potentiometric percholoric acid titration Thermal oxidation stability of aviation turbine fuels ASTM D ISO 8754:1992 IP 276/95(04)*ASTM D el IP 323/00*ASTM D Total acidity in aviation turbine fuel IP 354/98(04)*ASTM D Total salts content of crude oil - conductivity method Total solids content IP 265/01(04) MIL-T-83133E Assessment Manager : PB (TestPerm_034) Page 5 of 7
6 Vapour pressure of petroleum products (Reid method) Water content - distillation method Water in crude oil - coulometric Karl Fischer titration IP 69/01 ASTM D95-99 el IP 386/99 (modified) ASTM D el Water reaction of aviation fuels IP 289/02 ASTM D Water separation characteristics of aviation turbine fuels by portable separometer Wax content of petroleum products Xylene equivalent ASTM D a Documented In-House Method MT/FLC/07 MT/FLC/05 ENVIRONMENTAL SAMPLES Chemical Tests - Water Leachates Organic substances by GC/MS BS :2001 PETROLEUM PRODUCTS, CHEMICALS, CATALYSTS, LIQUIDS and SOLIDS - Aqueous and Organic Samples Quantitative analysis for: Aluminium Barium Boron Calcium Chromium Cobalt Copper Iron Lead Magnesium Manganese Molybdenum Nickel Phosphorus Potassium Silicon Silver Inductively Coupled Plasma Optical Emission Spectrometry MT/ELE/01 to 03 Assessment Manager : PB (TestPerm_034) Page 6 of 7
7 PETROLEUM PRODUCTS, CHEMICALS, CATALYSTS, LIQUIDS and SOLIDS (cont d) - Aqueous and Organic Samples (cont d) Chemical Tests (cont d) Quantitative analysis for: (cont d) Sodium Strontium Sulphur Tin Titanium Vanadium Zinc Ethanolamine PETROLEUM PRODUCTS, OILS and GREASES Quantitative analysis for Carbon Chlorine Hydrogen Nitrogen N-Nitrosodiethanolamine by HPLC and IC Qualitative and quantitative analysis to determine composition: Carbon type Hydrocarbons Nitration products High Temperature Combustion, Oxidative Combustion, Microcoulometry, UV Fluorescence, Chemiluminescence MT/ELE/11 to 13 MT/CMS/15 Infra-red and Fourier Transform Infra-red Spectroscopy MT/FLC/12, 08 END Assessment Manager : PB (TestPerm_034) Page 7 of 7
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK SGS West Thurrock Laboratory Contact: David Mercer (Laboratory Manager) 859 London Road Tel: +44 (0)1708 681943 West Thurrock Fax: +44 (0)1708
SCOPE OF ACCREDITATION
Standards Council of Canada 600-55 Metcalfe Street Ottawa, ON K1P 6L5 Canada Conseil canadien des normes 55, rue Metcalfe, bureau 600 Ottawa, ON K1P 6L5 Canada SCOPE OF ACCREDITATION InnoTech Alberta Inc.
ALL TESTS. Density Oscillating U-tube method * IP 365. Distillation characteristics of petroleum products - Micro distillation method IP 596
Tests marked * are ISO17025 accredited ALL TESTS TEST NAME Density Oscillating U-tube * IP 365 Distillation characteristics of petroleum products - Micro distillation IP 596 Mercaptans, hydrogen sulphide,
Annex no. 1 of Accreditation Certificate no. LI 333 from
Valid from 04.02.2008 to 04.02.2012 Oil Products Laboratory DJ No. 226, Nvodari, Constana county belonging to SC ROMPETROL QUALITY CONTROL SRL 1 2 3 4 Physical tests 1. Determination of the density with
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 LABORATORY SERVICES, PETROTRIN Southern Main Road Pointe-A-Pierre, Trinidad, Trinidad & Tobago Peter Bhim Phone: 868 658 4200 CHEMICAL Valid To: November 30,
Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion
IAS Accreditation Number Company Name Address Contact Name Telephone +966-14-398-2118 Effective Date of Scope May 1, 2018 Accreditation Standard ISO/IEC 17025:2017 TL-743 Yanbu Industrial Area Yanbu, Madina
International Quality Assurance Exchange Program Schedule. Fuel Month Number Type Dispatch Date Closing Date
Fuel 2018 Month Number Type Dispatch Date Closing Date January February March April May June July August September October November December M902 Motor Gasoline, Premium A372 Aviation Gasoline, 100LL D295
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 6 Prenton Way Contact: Dr J Roberts North Cheshire Trading Estate Tel: +44 (0)151 649 9955 Prenton Fax: +44 (0)151 649 9977 Wirral E-Mail:
Softening point by Ring & Ball. Density and relative density of liquids by Hubbart pycnometer
Softening point by Ring & Ball Density and relative density of liquids by Hubbart pycnometer Distillation of petroleum Melting point of petroleum wax Precipitation number of lubricating oils Saponification
10.6 Schedule of Accreditation
GEO-CHEM Middle East Laboratory No. ATL0015 is accredited by the GCC Accreditation Center () in accordance with the recognised International Standard, General requirements for the competence of testing
Paragon Scientific Ltd Proficiency Testing Scheme Schedule
Paragon Scientific Ltd Proficiency Testing Scheme Schedule Proficiency Testing Scheme Schedule Page 1 of 16 Issue : 29/01/2015 Print : 25/06/2018 Viscosity ASTM D445 - Standard Test Method for Kinematic
10.6 Scope of Accreditation
GEO-CHEM Middle East Laboratory No. ATL0015 is accredited by the GCC Accreditation Center () in accordance with the recognised International Standard, General requirements for the competence of testing
Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17640-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 18.12.2017 to 04.11.2018 Holder of certificate: Haltermann
10.6 Scope of Accreditation
Testing Laboratory Accreditation is accredited by the GCC Accreditation Center () in accordance with the recognised International Standard, General requirements for the competence of testing and calibration
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SOUTHWEST RESEARCH INSTITUTE Office of Automotive Engineering Fuels and Lubricants Research Division 6220 Culebra Road, P.O. Drawer 28510 San Antonio, TX 78228-0510
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SOUTHWEST RESEARCH INSTITUTE Office of Automotive Engineering Fuels and Lubricants Research Division 6220 Culebra Road, P.O. Drawer 28510 San Antonio, TX 78228-0510
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Issue No: 031 Issue date: 21 ugust 2018 ccredited to Unit 7 Prince William Drive
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK ITS Testing Services (UK) Limited (Caleb Brett - Downstream) Caleb Brett House Unit A 734 London Road West Thurrock Grays Essex RM20 3NL Contact:
SCOPE OF ACCREDITATION TO ISO/IEC 17043:2010. ASTM INTERNATIONAL 100 Barr Harbor Drive West Conshohocken, PA Amy Meacock
SCOPE OF ACCREDITATION TO ISO/IEC 17043:2010 ASTM INTERNATIONAL 100 Barr Harbor Drive West Conshohocken, PA 19428 Amy Meacock 610 832 9688 PROFICIENCY TESTING PROVIDER Valid To: May 31, 2021 Certificate
GB Translated English of Chinese Standard: GB NATIONAL STANDARD
Translated English of Chinese Standard: GB18351-2015 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 75.160.20 E 31 GB 18351-2015 Replacing
GB Translated English of Chinese Standard: GB NATIONAL STANDARD OF THE
Translated English of Chinese Standard: GB17930-2013 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 75.160.20 E 31 GB 17930-2013 Replacing
REBCO (RUSSIAN EXPORT BLEND CRUDE OIL) SPECIFICATION GOST
REBCO (RUSSIAN EXPORT BLEND CRUDE OIL) SPECIFICATION GOST 51858-2002 Characteristics Units Result Test Method Density (Specific Gravity) @ 20 C g /sm 3 0.870 ASTM D5002 Sulphur Content wt.% 1.8 ASTM D4294
Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18436-01-01 according to DIN EN ISO/IEC 17025:2005 Period of validity: 22.01.2018 to 28.10.2019 Holder of certificate: ISP
Coefficient of Friction of Lubricants D 5707 p. 69 Coking Value D 4715 p. 70 Cold Cranking Simulator Manual Method D 2602 p. 71 Automatic Method--see
Introduction p. 1 Explanation of Terms p. 2 Test Method Equivalence p. 3 Alphanumeric Index of Standards p. 5 Acid Number Colorimetric Titration--see also Base Number, p. 43 D 974 p. 11 Potentiometric
Crude Assay Report. Crude Oil sample marked. Barrow Crude Oil. On Behalf Of. Chevron Australia Pty Ltd. Laboratory Supervisor. Crude Assay Chemist
Crude Assay Report on Crude Oil sample marked Barrow Crude Oil On Behalf Of Chevron Australia Pty Ltd. Reported by: Approved by: Michelle Fernandez Laboratory Supervisor Jhonas Fernandez Crude Assay Chemist
ISO Petroleum products Fuels (class F) Specifications of marine fuels
INTERNATIONAL STANDARD ISO 8217 Fifth edition 2012-08-15 Petroleum products Fuels (class F) Specifications of marine fuels Produits pétroliers Combustibles (classe F) Spécifications des combustibles pour
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 LABORATORY & ON-STREAM ANALYSER DIVISION, SAUDI ARAMCO TOTAL REFINING AND PETROCHEMICAL COMPANY LAB & OSA Division Saudi Aramco Total Refining and Petrochemical
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that EPA National Vehicle and Fuel Emissions Laboratory
ISBN SANS 342:2006 Edition 4 SOUTH AFRICAN NATIONAL STANDARD Automotive diesel fuel Published by Standards South Africa 1 dr lategan roa
ISBN 0-626-18752-4 SOUTH AFRICAN NATIONAL STANDARD Automotive diesel fuel Published by Standards South Africa 1 dr lategan road groenkloof private bag x191 pretoria 0001 tel: 012 428 7911 fax: 012 344
SOUTH AFRICAN NATIONAL STANDARD
ISBN 0-626-18752-4 SANS 342:2006 SOUTH AFRICAN NATIONAL STANDARD Automotive diesel fuel Published by Standards South Africa 1 dr lategan road groenkloof private bag x191 pretoria 0001 tel: 012 428 7911
Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH German Accreditation Body Annex to the Accreditation Certificate D-PL-20591-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 14.08.2017 to 13.08.2022
OIL PT. Scheme Description. Oils and Fuels Analysis Proficiency Testing Scheme
OIL PT Oils and Fuels Analysis Proficiency Testing Scheme Scheme Description LGC Standards Proficiency Testing 1 Chamberhall Business Park Chamberhall Green Bury, BL9 0AP UK. Telephone: +44 (0) 161 762
VHG Labs, Inc. Standards and Supplies for Spectrochemical Oil Analysis
VHG Labs, Inc. Standards and Supplies for Spectrochemical Oil Analysis Metallo-Organic Standards from VHG Labs VHG Labs has been a provider of quality analytical products and services for over 25 years.
ANNEX 2, REFERENCE FUELS
ANNEX 2, REFERENCE FUELS A.2.1. A.2.1.1. EUROPE, INDIA, SOUTH AFRICA Petrol (E5) Parameter Unit Limits (1) Test method Research octane number, RON 95.0 EN 25164 pren ISO 5164 Motor octane number, MON 85.0
Supply of Services for Detailed OEB Crude Assay Analysis
Tender Number [9900009229] Supply of Services for Detailed OEB Crude Assay Analysis SCOPE OF WORK SCOPE OF WORK 1. Introduction Orpic is the brand name for Oman Oil Refineries and Petroleum Industries
Specifications Of Straight Run Naphtha for Exportation
Specifications Of Straight Run Naphtha for Exportation ASTM Specific Gravity @ 60/60 F 1298 160 0.690-0.730 Colour VISUAL Colourless R.V.P @ 100 F kg/cm2 max 323 69 0.07 Sulphur, Total %mass max 1266 107
ANNEX 3 REFERENCE FUELS. Parameter Unit Limits (1) Test method Minimum Maximum Research octane number, RON
WLTP-2012-018 Annex 3 Draft Reference fuels 03.06.2012 ANNEX 3 REFERENCE FUELS The reference fuel specifications listed in this annex are those that are to be used for the WLTP Validation 2 exercise and
GB Translated English of Chinese Standard: GB NATIONAL STANDARD
Translated English of Chinese Standard: GB17930-2016 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 75.160.20 E 31 GB 17930-2016 Replacing
ASTM D2007M/ASTM D2549M In-house method/astm D6560/D3279
ID Test Standard Amount Required Price for Cost Recovery Projects (Can $) 1 2 3 4 5 Sulfur compounds distribution by boiling point (GC-SCD) Sulfur compound speciation by GC-SCD Nitrogen compounds distribution
Annex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 20281 01 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 31.08.2016 to 30.08.2021 Holder of certificate: Deutsche
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Nordic Camp Supply Kabul (HKIA) Fuel Testing
Savant Labs Laboratory Testing Services. Tests by Method
ASTM D86 Distillation 400 ml ASTM D92 Fire Point, Cleveland Open Cup 250 ml ASTM D92 Flash Point and Fire Point, Cleveland Open Cup 250 ml ASTM D92 Flash Point, Cleveland Open Cup 250 ml ASTM D93 Flash
एमआरप एल ग णव नय ण य गश ल उप दन व श:२०१७ MRPL QC LABORATORY
एमआरप एल ग णव नय ण य गश ल उप दन व श:२०१७ MRPL QC LABORATORY PRODUCTS SPECIFICATIONS:2017 INDIAN STANDARD (IS) SPECIFICATIONS FOR DOMESTIC PRODUCTS: 2017 S.No Product Name Specification Number 1 Liquefied
DRAFT EAST AFRICAN STANDARD
ICS 75.160.20 DRAFT EAST AFRICAN STANDARD Automotive gasoline (premium motor spirit) Specification EAST AFRICAN COMMUNITY EAC 2018 Third Edition 2018 Copyright notice This EAC document is copyright-protected
ISO 8217 INTERNATIONAL STANDARD. Petroleum products Fuels (class F) Specifications of marine fuels
INTERNATIONAL STANDARD ISO 8217 Fourth edition 2010-06-15 Petroleum products Fuels (class F) Specifications of marine fuels Produits pétroliers Combustibles (classe F) Spécifications des combustibles pour
National Oil Corporation Libyan Petroleum Institute. Crude oil assay Sarir crude oil
National Oil Corporation Libyan Petroleum Institute Crude oil assay Sarir crude oil Work Order No. LPI- 00344/10/IL02/2008 Client: National Oil Corporation Date of Issue: Dec., 2008 Prepared by: Industrial
Scope of testing. State: March Contents: siemens.com/energy
Scope of testing State: March 2017 Siemens AG - Material testing laboratory Nuremberg Contents: 1. Our services 2. Quality assurance 3. Sampling and bottles 4. Scope of testing of material testing laboratory
ENGINEERED LUBRICANTS CO.
ENGINEERED LUBRICANTS CO. LABORATORY FEE SCHEDULE Effective August 1, 2017 Page 1 of 5 Please send in SDS with samples. If you do not have an SDS please give a generic make-up of the product. (If we do
National Oil Corporation Libyan Petroleum Institute. Crude Oil Assay Messla Crude Oil
National Oil Corporation Libyan Petroleum Institute Crude Oil Assay Messla Crude Oil Work Order No. LPI- 00344/08/IL02/2008 Client: National Oil Corporation Date of Issue: Nov., 2008 Prepared by: Industrial
Index 1. ISO 8217 :
Index 1. ISO 8217 : 2010... 2 a. MARINE DISTILLATE FUELS... 2 b. MARINE RESIDUAL FUELS...3 2. ISO 8217 : 2005... 4 a. MARINE DISTILLATE FUELS... 4 b. MARINE RESIDUAL FUELS Grades 30, 80, 180 mm 2 /s (cst)...
ASTM Methods that are feasible with Metrohm instruments
ASTM Methods that are feasible with Metrohm instruments Automotive ASTM D5827-09 Standard test method for analysis of engine coolant for chloride and other anions by ion Biofuels a) Biodiesel ASTM D664-09
ISO 8217 INTERNATIONAL STANDARD. Petroleum products Fuels (class F) Specifications of marine fuels
INTERNATIONAL STANDARD ISO 8217 Third edition 2005-11-01 Petroleum products Fuels (class F) Specifications of marine fuels Produits pétroliers Combustibles (classe F) Spécifications des combustibles pour
Certificate of Accreditation
Certificate of Accreditation ISO/IEC 17025:2005 Certificate Number L2264.03 Analysts, Inc. 2450 Hassell Road Hoffman Estates IL 60195 has met the requirements set forth in L-A-B s policies and procedures,
EAST AFRICAN STANDARD. Automotive gasoline (premium motor spirit) Specification EAST AFRICAN COMMUNITY. HS (regular); HS
EAST AFRICAN STANDARD Automotive gasoline (premium motor spirit) Specification EAST AFRICAN COMMUNITY HS 2710.11.10(regular); HS 2710.11.10(premium) ICS 75.160.20 EAS 2011 Second Edition 2011 ii Table
Regional Laboratory, Indian Oil Corporation Limited, Korukkupet Terminal, Kathivakkam High Road, Chennai, Tamil Nadu
Regional, Indian Oil Corporation Limited, Korukkupet Last Amended on 07.01.2014 Page 1 of 5 Specific Method Specification against Range of ing / I. PETROLEUM PRODUCTS 1. JetA1, JP5 Acidity, Total P-113
Fuel Related Definitions
Fuel Related Definitions ASH The solid residue left when combustible material is thoroughly burned or is oxidized by chemical means. The ash content of a fuel is the non combustible residue found in the
Fuel oils Specification
TANZANIA STANDARD CDC15 (4029)P3 (Rev. of TZS 673:2014) Fuel oils Specification 0 Foreword This Tanzania Standard was prepared under the direction of Petroleum and Petroleum Products Technical committee,
Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels 1
Designation: D 6751 03a An American National Standard Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels 1 This standard is issued under the fixed designation D 6751;
PRICE LIST 2017/2018
PRECISION PETROLEUM LABS, INC. 5915 STAR LANE HOUSTON, TX 77057 PRICE LIST 2017/2018 PH: 713-680-9425 Fax: 713-680-9564* WEBSITE: PRECISIONLABS.ORG FUEL TESTING Acidity as Acetic Acid D-1613 $65.00 Alcohol
Ceiba Crude (31.44 API, Sul WT%)
Ceiba Crude (31.44 API, 0.398 Sul WT%) Crude Name: Ceiba Crude API Gravity API 31.44 Component Wt % Vol % Crude ID: CEIBA2015 Density @15 deg C KG/L 0.8679 C2 Minus 0.004 0.01 Country: Equatorial Guinea
Tung Xiao Dan Assistant Chemist Mark Tan Section Head Feedstock Evaluation Department
Sample ID : Lab ID : Date : Client : Chim Sao Crude 2014-FED-051699 01 October 2014 Premier Oil Sample Number : Sample Date : Sample Time : Location : 4/4 10/9/2014 1500hrs Run Down Reported by : Approved
Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels 1
Designation: D 6751 07a An American National Standard Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels 1 This standard is issued under the fixed designation D 6751;
एमआरप एल ग णव नय ण य गश ल वष 2019 क लए प उ!प द# क लए भ रत य म नक QC LABORATORY INDIAN STANDARD FOR PETROLEUM PRODUCTS SPECIFICATION FOR YEAR 2019
एमआरप एल ग णव नय ण य गश ल वष 2019 क लए प उ!प द# क लए भ रत य म नक MRPL QC LABORATORY INDIAN STANDARD FOR PETROLEUM PRODUCTS SPECIFICATION FOR YEAR 2019 Page 1 of 15 BUREAU OF INDIAN STANDARDS (BIS) SPECIFICATION
MUTINEER EXETER CRUDE OIL. Santos Limited
Crude Assay Job Number 08-January-2015 43.1 API 0.10 mgkoh/g TAN 0.038 %m Sulphur 11.8 K Factor on behalf of Santos Limited :Report By Approved By: Joshua Camens Lab. Supervisor Jhonas Fernandez Lab. Manager
The Eurasian Economic Community Customs Union Commission Decision of October 18, 2011 N 826
The Eurasian Economic Community Customs Union Commission Decision of October 18, 2011 N 826 THE ADOPTION OF TECHNICAL REGULATIONS OF THE CUSTOMS UNION "On requirements for automobile and aviation gasoline,
DETAIL SPECIFICATION FUEL, NAVAL DISTILLATE. This specification is approved for use by all Departments and Agencies of the Department of Defense.
METRIC 14 August 2012 SUPERSEDING MIL-DTL-16884L 23 October 2006 DETAIL SPECIFICATION FUEL, NAVAL DISTILLATE This specification is approved for use by all Departments and Agencies of the Department of
Certificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
FREQUENTLY ASKED QUESTIONS (FAQs)
FREQUENTLY ASKED QUESTIONS (FAQs) What are the Petrochemicals? Any chemical derived from crude oil,crude products or natural gas. Where the petrochemicals are used? In the manufacture of Synthetic rubber,
Antek Gas Chromatography Products: A Guided Tour Through Industry
ANTEK GC Application Solutions Feature the Following Detectors: Antek Sulfur and Nitrogen Chemiluminescence, Flame Ionization, Thermal Conductivity, Nitrogen-Phosphorus, Atomic Emission, Halogen Specific,
एमआरप एल ग णव नय ण य गश ल आई.एस एस.उप दन व श:२०१ MRPL QC LABORATORY IS PRODUCTS SPECIFICATION:2018. Page 1 of 17
एमआरप एल ग णव नय ण य गश ल आई.एस एस.उप दन व श:२०१ २०१८ MRPL QC LABORATORY IS PRODUCTS SPECIFICATION:2018 Page 1 of 17 INDIAN STANDARD (IS) SPECIFICATION FOR DOMESTIC PRODUCTS: 2018 S. No Product Name Specification
COOPER BASIN CRUDE OIL. Santos Limited
Crude Assay Job Number 13-September-2016 43.1 API
EDICT ± OF GOVERNMENT
EDICT ± OF GOVERNMENT Inordertopromotepubliceducationandpublicsafety,equal justiceforal,abeterinformedcitizenry,theruleoflaw,world tradeandworldpeace,thislegaldocumentisherebymade availableonanoncommercialbasis,asitistherightofal
MiniLab EL Series for High Performance Engine Development and Maintenance
MiniLab EL Series for High Performance Engine Development and Maintenance Optimize performance output Detect problems early Ensure safety in operation Engine Oil Analysis: A Reliable Technique for Engine
Sampling kits and test suites
Shell LubeAnalyst Sampling kits and test suites Oil sampling kits and test suites Basic K1 - Transport Monitors wear & contamination Basic Plus K1+ - Transport Determines optimum drain intervals Differentials,
MiniLab EL Series for High Performance Engine Development and Maintenance
MiniLab EL Series for High Performance Engine Development and Maintenance Optimize performance output Detect problems early Ensure safety in operation Engine Oil Analysis: A Reliable Technique for Engine
Module8:Engine Fuels and Their Effects on Emissions Lecture 36:Hydrocarbon Fuels and Quality Requirements FUELS AND EFFECTS ON ENGINE EMISSIONS
FUELS AND EFFECTS ON ENGINE EMISSIONS The Lecture Contains: Transport Fuels and Quality Requirements Fuel Hydrocarbons and Other Components Paraffins Cycloparaffins Olefins Aromatics Alcohols and Ethers
Alcor Petrolab Company Test List March 14, 2018 Item Description Sample Volume-ML Sample Volume-G
A-A-59173A-00 A-A-59173A 3.8 (Solidification @ -55 C / -67 F) 100 A-A-59173A-01 A-A-59173A 3.1 (Visual Inspection) 100 AAR-M914-00 AAR M-914 2.3.2 (Freezing Point) 100 AAR-M914-01 AAR M-914 2.3.3 (Spreadability)
CONTENTS. Introduction 1 Explanation of Terms 2 Table I Test Method Equivalence 3 Table II Alphanumeric Index of Standards 6
vii CONTENTS Introduction 1 Explanation of Terms 2 Table I Test Method Equivalence 3 Table II Alphanumeric Index of Standards 6 Analysis Reference ASTM Standard ACID NUMBER by color indicator titration
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60296 Third edition 2003-11 Fluids for electrotechnical applications Unused mineral insulating oils for transformers and switchgear IEC 2003 Copyright - all rights reserved No
Appendix A.1 Calculations of Engine Exhaust Gas Composition...9
Foreword...xi Acknowledgments...xiii Introduction... xv Chapter 1 Engine Emissions...1 1.1 Characteristics of Engine Exhaust Gas...1 1.1.1 Major Components of Engine Exhaust Gas...1 1.1.2 Units Used for
10.6 Schedule of Accreditation
Testing Laboratory is accredited by the GCC Accreditation Center () in accordance with the recognised International Standard, General requirements for the competence of testing and calibration laboratories
PERFORMANCE SPECIFICATION CALIBRATING FLUIDS, AIRCRAFT FUEL SYSTEM COMPONENTS
METRIC 20 January 2012 SUPERSEDING MIL-PRF-7024E 1 October 1997 PERFORMANCE SPECIFICATION CALIBRATING FLUIDS, AIRCRAFT FUEL SYSTEM COMPONENTS Comments, suggestions, or questions on this document should
DRAFT UGANDA STANDARD
DRAFT UGANDA STANDARD DUS DEAS 158 Third Edition 2019-mm-dd Automotive gasoline (premium motor spirit) Specification PUBLIC REVIEW DRAFT Reference number DUS DEAS 158: 2019 UNBS 2019 DUS DEAS 158: 2019
Tests conducted under the following industry standards for PermaFrost API ASHRAE ARI ASTM EPA ANSI UL. SINCE 1985 Quality Controlled Through Analysis
Tests conducted under the following industry standards for PermaFrost API ASHRAE ARI ASTM EPA ANSI UL SINCE 1985 Client: Powertron LLC Requested By: Mr. Tony Sgarbi Sample: 10% PermaFrost + 90% Report
FINAL DRAFT BELIZE STANDARD SPECIFICATION FOR UNLEADED GASOLINE FOR MOTOR VEHICLES. ooooooooooooooooooooo
ISSUED FOR COMMENTS ONLY oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo FINAL DRAFT BELIZE STANDARD SPECIFICATION FOR UNLEADED GASOLINE FOR MOTOR VEHICLES ooooooooooooooooooooo
ITS Caleb Brett India:
ITS Caleb Brett India: World-Class Inspection & Quality Control Testing. Serving India, the region and the world. See Our Services Pages 2-17. ITS Caleb Brett India has six analytical testing laboratories
Fundamentals of Petroleum Refining Refinery Products. Lecturers: assistant teachers Kirgina Maria Vladimirovna Belinskaya Natalia Sergeevna
Fundamentals of Petroleum Refining Refinery Products Lecturers: assistant teachers Kirgina Maria Vladimirovna Belinskaya Natalia Sergeevna 1 Refinery Products Composition There are specifications for over
FORLINE LTD. Global Energy Solutions Kenneth Pike, Suite 200B Greenville, Delaware, 19807, USA. 19 Kathleen Road, SW11 2JR, London, England
Greenville, Delaware, 9807, USA Gasoline Diesel Jet Fuel Motor Oil Crude Oil 9 Kathleen Road, SW 2JR, Company Overview Forline LTD is London, UK based integrated distributor and marketer of commodities.
360 INDEX. boiling point of gas oil components, 84 boiling range, 353 bunker fuels, 8 fuel No. 6 characteristics, 339 classification, 338
Index acidity/acid no., 351 additives aviation gasoline, 317 classification, 178 composition, 256 consumption, 182 diesel distribution, 180 diesel fuels, 179 diesel vehicle system, 181 fuels, 121, 351
Exceeding Expectations
Technical Notes # 028 Linear vs. Non-Linear that is the question Exceeding Expectations When blending, it is important to understand whether the specification you are blending for is linear or non-linear
T. Jafari Behbahani, H. Talachi & M. Taymori
-,,,, STUDY OF LIQUID SOLVENT DEASPHALTING OF HEAVY RESIDUES T. Jafari Behbahani, H. Talachi & M. Taymori Research Institute of Petroleum Industry (RIPI), Tehran, Iran, jafarit@ripi.ir Abstract: In the
T. Jafari Behbahani, H. Talachi & M. Taymori
-,,,, STUDY OF LIQUID SOLVENT DEASPHALTING OF HEAVY RESIDUES T. Jafari Behbahani, H. Talachi & M. Taymori Research Institute of Petroleum Industry (RIPI), Tehran, Iran, jafarit@ripi.ir Abstract: In the
Test Methods & Procedures Spec Numbers Description
METHODS & PROCEDURES Test Methods & Procedures Test Methods & Procedures Spec Numbers Description Air Release Value Minutes to 0.2% air @ 50 Aniline Point Anti-Wear Vane Pump Test 250 hours, 140 bar @
Types of Oil and their Properties
CHAPTER 3 Types of Oil and their Properties Oil is a general term that describes a wide variety of natural substances of plant, animal, or mineral origin, as well as a range of synthetic compounds. The
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-29808-1 SOUTH AFRICAN NATIONAL STANDARD Kerosene for domestic heating and illuminating WARNING This standard references other documents normatively. Published by SABS Standards Division
ASTM Aviation (Turbine) Jet Fuel Sample ID: JF1211
ACID NUMBER D3242 Report result to the nearest 0.001 mg KOH/g Acidity BOCLE (LUBRICITY) D5001 Report result to nearest 0.01 mm Fully-automatic WEAR SCAR DIAMETER (WSD) Semi-automatic WEAR SCAN DIAMETER
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-33225-9 SOUTH AFRICAN NATIONAL STANDARD Automotive fuels Requirements and test methods for diesel WARNING This document references other documents normatively. Published by SABS Standards
Conversion of Peanut Oil into Jet and Diesel Fuels. Panama City, Florida 22 July 2016 Edward N. Coppola
Conversion of Peanut Oil into Jet and Diesel Fuels Panama City, Florida 22 July 2016 Edward N. Coppola SOLVING PROBLEMS OF GLOBAL IMPORTANCE About ARA, Inc. Founded 1979, Albuquerque, New Mexico 1,086
एमआरप एल ग णव नय ण य गश ल आई.एस एस.उप दन व श:२०१ MRPL QC LABORATORY IS PRODUCTS SPECIFICATION:2018. Page 1 of 16
एमआरप एल ग णव नय ण य गश ल आई.एस एस.उप दन व श:२०१ २०१८ MRPL QC LABORATORY IS PRODUCTS SPECIFICATION:2018 Page 1 of 16 INDIAN STANDARD (IS) SPECIFICATION FOR DOMESTIC PRODUCTS: 2018 S. No Product Name Specification
DETAIL SPECIFICATION TURBINE FUEL, AVIATION, THERMALLY STABLE (JPTS)
METRIC (USAF) 25 July 2016 SUPERSEDING (USAF) 04 September 2015 DETAIL SPECIFICATION TURBINE FUEL, AVIATION, THERMALLY STABLE (JPTS) This specification is approved for use by the Department of the Air