SOUTH AFRICAN NATIONAL STANDARD
|
|
|
- Ann Phelps
- 5 years ago
- Views:
Transcription
1 ISBN SOUTH AFRICAN NATIONAL STANDARD Automotive fuels Requirements and test methods for diesel WARNING This document references other documents normatively. Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: Fax: SABS
2 Table of changes Change No. Date Scope Amdt Amended to update the foreword, referenced standards and definitions. Foreword This South African standard was approved by National Committee SABS/TC 028/SC 03, Petroleum products, biofuels and lubricants Fuels, in accordance with procedures of the SABS Standards Division, in compliance with annex 3 of the WTO/TBT agreement. This document was approved for publication in December This document supersedes SANS 342:2014 (edition 5). This document is referenced in the Petroleum Products Act, 1977 (Act No. 120 of 1977). Reference is made in 3.3 and in the note to 3.3 to the "relevant national legislation". In South Africa this means the Regulations of the Petroleum Products Act, 1977 (Act No. 120 of 1977), as published by Government Notice No. R. 627 (Government Gazette No ) of 23 June Amdt 1 Reference is made in the note to 3.3 to "relevant national department". In South Africa this means the Department of Energy. Amdt 1 Reference is made in 3.4 and in the note to 3.4 to the "relevant national legislation". In South Africa this means the Regulations of the Petroleum Products Act, 1977 (Act No. 120 of 1977), as published by Government Notice No. R. 431 (Government Gazette No ) of 1 June Amdt 1 Reference is made in the note to 3.4 to "relevant national department". In South Africa this means the Department of Energy. Amdt 1 Reference is made in 4.4 to the "relevant national legislation". In South Africa, this means the Petroleum Products Act, 1977 (Act No. 120 of 1977). Annex A is for information only. Compliance with this document cannot confer immunity from legal obligations.
3 Contents Page Foreword 1 Scope Normative references Definitions Requirements General Automotive diesel fuel Additives Biodiesel blending Sampling and methods of test Sampling Methods of test Logistic requirements Packing and transport Classification and labelling Storage equipment for diesel Annex A (informative) Quality verification of automotive diesel fuel Bibliography
4 This page is intentionally left blank 2
5 Automotive fuels Requirements and test methods for diesel 1 Scope This standard specifies the grades of automotive diesel fuel containing up to a volume fraction of 5 % of automotive biodiesel in accordance with SANS 1935, and suitable for use in compression-ignition engines, including high-speed engines. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. Information on currently valid national and international standards can be obtained from the SABS Standards Division. ASTM D86, Standard test method for distillation of petroleum products and liquid fuels at atmospheric pressure. ASTM D93, Standard test methods for flash point by Pensky-Martens closed cup tester. ASTM D130, Standard test method for corrosiveness to copper from petroleum products by copper strip test. ASTM D445, Standard test method for kinematic viscosity of transparent and opaque liquids (and the calculation of dynamic viscosity). ASTM D482, Standard test method for ash from petroleum products. ASTM D613a, Standard test method for cetane number of diesel fuel oil. ASTM D976, Standard test methods for calculated cetane index of distillate fuels. ASTM D1298b, Standard test method for density, relative density, or API gravity of crude petroleum and liquid petroleum products by hydrometer method. ASTM D2274, Standard test method for oxidation stability of distillate fuel oil (accelerated method). ASTM D2425, Standard test method for hydrocarbon types in middle distillates by mass spectrometry. ASTM D2500, Standard test method for cloud point of petroleum products. 3
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-29808-1 SOUTH AFRICAN NATIONAL STANDARD Kerosene for domestic heating and illuminating WARNING This standard references other documents normatively. Published by SABS Standards Division
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32599-2 SOUTH AFRICAN NATIONAL STANDARD Electrical security installations Part 3: Electric fences (non-lethal) and manufacture requirements WARNING This document references other documents
ISBN SANS 342:2006 Edition 4 SOUTH AFRICAN NATIONAL STANDARD Automotive diesel fuel Published by Standards South Africa 1 dr lategan roa
ISBN 0-626-18752-4 SOUTH AFRICAN NATIONAL STANDARD Automotive diesel fuel Published by Standards South Africa 1 dr lategan road groenkloof private bag x191 pretoria 0001 tel: 012 428 7911 fax: 012 344
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-33678-3 SANS 1239:2004 Any reference to SABS 1239 is deemed to be a reference to this standard (Government Notice No. 1373 of 8 November 2002) SOUTH AFRICAN NATIONAL STANDARD Plugs, socket-outlets
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32159-8 Any reference to SABS 1551-1 is deemed to be a reference to this standard (Government Notice No. 1373 of 8 November 2002) SOUTH AFRICAN NATIONAL STANDARD Check valves (flanged and
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32948-8 SOUTH AFRICAN NATIONAL STANDARD Petroleum jelly (petrolatum) WARNING This document references other documents normatively. Published by SABS Standards Division 1 Dr Lategan Road
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28761-0 SOUTH AFRICAN NATIONAL STANDARD Earthing of low-voltage (LV) distribution systems Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-31203-9 SOUTH AFRICAN NATIONAL STANDARD Traffic lights WARNING This document references other documents normatively. Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private
SOUTH AFRICAN NATIONAL STANDARD
ISBN 0-626-18752-4 SANS 342:2006 SOUTH AFRICAN NATIONAL STANDARD Automotive diesel fuel Published by Standards South Africa 1 dr lategan road groenkloof private bag x191 pretoria 0001 tel: 012 428 7911
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-31488-0 SOUTH AFRICAN NATIONAL STANDARD Switchgear Metal-enclosed ring main units for rated a.c. voltages above 1 kv and up to and including 36 kv WARNING This document references other
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-29010-8 SOUTH AFRICAN NATIONAL STANDARD Homologation of motor vehicle models Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: +27 12
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-23806-3 SOUTH AFRICAN NATIONAL STANDARD The handling, storage, distribution and maintenance of liquefied petroleum gas in domestic, commercial and industrial installations Part 4: The transportation
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-34898-4 SOUTH AFRICAN NATIONAL STANDARD Motor vehicle tyres and rims Dimensions and loads Part 1: General WARNING This document references other documents normatively. Published by the South
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-21023-6 Any reference to SABS 0241 is deemed to be a reference to this standard (Government Notice No. 1373 of 8 November 2002) SOUTH AFRICAN NATIONAL STANDARD Tachograph centres Installation
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-24538-2 SOUTH AFRICAN NATIONAL STANDARD Transport of dangerous goods Design, construction, testing, approval and maintenance of road vehicles and portable tanks WARNING: Can only be read
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-19459-8 SOUTH AFRICAN NATIONAL STANDARD Verification standards for the verification of volume-measuring instruments, including commercial standards of volume Published by Standards South
SOUTH AFRICAN NATIONAL STANDARD
ICS 43020 ISBN 0-626-17429-5 Edition 11 Any reference to SABS 0319 is deemed to be a reference to this standard (Government Notice No 1373 of 8 November 2002) SOUTH AFRICAN NATIONAL STANDARD The registration
SOUTH AFRICAN NATIONAL STANDARD. Plug and socket-outlet systems for household and similar purposes for use in South Africa
ISBN 978-0-626-27016-2 SANS 164-1:2012 SOUTH AFRICAN NATIONAL STANDARD Plug and socket-outlet systems for household and similar purposes for use in South Africa Part 1: Conventional system, 16 A 250 V
SOUTH AFRICAN NATIONAL STANDARD
ISBN 0-626-17643-3 SOUTH AFRICAN NATIONAL STANDARD Safety rules for the construction and installation of lifts Part 3: Lifts for persons with Amdt 3 disabilities (stairlifting platforms) Published by Standards
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-22612-1 SANS 20013-H:2009 Edition 2 and ECE amdt 1 ECE R13-H:2008 Revision 1 and amdt 1 SOUTH AFRICAN NATIONAL STANDARD Uniform provisions concerning the approval of passenger cars with
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-23643-4 SOUTH AFRICAN NATIONAL STANDARD The testing of motor vehicles for roadworthiness WARNING This standard can only be used in conjunction with the relevant national legislation (see
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-33757-5 Edition 4.1 IEC 60269-2:2016 Edition 5.1 SOUTH AFRICAN NATIONAL STANDARD Low-voltage fuses Part 2: Supplementary requirements for fuses for use by authorised persons (fuses mainly
SOUTH AFRICAN NATIONAL STANDARD
ICS 4304040 ISBN 0-626-17644-1 Any reference to SABS SV 1051-1 is deemed to be a reference to this standard (Government Notice No 1373 of 8 November 2002) SOUTH AFRICAN NATIONAL STANDARD Motor vehicle
SOUTH AFRICAN NATIONAL STANDARD
ICS 23.020.10; 75.200 ISBN 0-626-15187-2 SOUTH AFRICAN NATIONAL STANDARD Above-ground storage tanks for petroleum products Published by Standards South Africa 1 dr lategan road groenkloof! private bag
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-2-3382-8 Edition 3.2 and IEC corr. 1 IEC 0309-1:2012 Edition.2 and corr. 1 SOUTH AFRICAN NATIONAL STANDARD Plugs, socket-outlets and couplers for industrial purposes This national standard is
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-31092-9 IEC 62485-3:2014 SOUTH AFRICAN NATIONAL STANDARD Safety requirements for secondary batteries and battery installations Part 3: Traction batteries This national standard is the identical
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-29978-1 IEC 60079-17:2013 SOUTH AFRICAN NATIONAL STANDARD Explosive atmospheres Part 17: Electrical installations inspection and maintenance This national standard is the identical implementation
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32581-7 SOUTH AFRICAN NATIONAL STANDARD Gravity drainage systems inside buildings Part 3: Roof drainage, layout and calculation This national standard is the identical implementation of,
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28543-2 Edition 2.1 and IEC corr. 1 IEC 62271-100:2012 Edition 2.1 and corr. 1 SOUTH AFRICAN NATIONAL STANDARD High-voltage switchgear and controlgear This national standard is the identical
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28152-6 EN 197-1:2011 SOUTH AFRICAN NATIONAL STANDARD Cement Part 1: Composition, specifications and conformity criteria for common cements This national standard is the identical implementation
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-29507-3 EN 413-1:2011 SOUTH AFRICAN NATIONAL STANDARD Masonry cement Part 1: Composition, specifications and conformity criteria This national standard is the identical implementation of
ISO Petroleum products Fuels (class F) Specifications of marine fuels
INTERNATIONAL STANDARD ISO 8217 Fifth edition 2012-08-15 Petroleum products Fuels (class F) Specifications of marine fuels Produits pétroliers Combustibles (classe F) Spécifications des combustibles pour
DRAFT SOUTH AFRICAN STANDARD (DSS): PUBLIC ENQUIRY STAGE
Document number 022/SANS 1496 Reference SANS 1496 DRAFT SOUTH AFRICAN STANDARD (DSS): PUBLIC ENQUIRY STAGE Date of circulation 2017-09-14 Closing date 2017-11-15 Number and title: SANS 1496:XXXX Wheel
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-31521-4 EN 300:2006 SOUTH AFRICAN NATIONAL STANDARD Oriented Strand Boards (OSB) Definitions, classification and specifications This national standard is the identical implementation of
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-30207-8 SOUTH AFRICAN NATIONAL STANDARD Chemicals used for treatment of water intended for human consumption Chlorine This national standard is the identical implementation of and is adopted
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28107-6 EN 1008:2002 SOUTH AFRICAN NATIONAL STANDARD Mixing water for concrete Specification for sampling, testing and assessing the suitability of water, including water recovered from
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-27311-8 SANS 1332:2013 Edition 1 SOUTH AFRICAN NATIONAL STANDARD Accessories for medium-voltage XLPE and impregnated paper-insulated power cables (3,8/6,6 kv to 19/33 kv) This national standard
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-26065-1 Edition 1 EN 12281:2002 Edition 2 SOUTH AFRICAN NATIONAL STANDARD Printing and business paper Requirements for copy paper for dry toner imaging processes This national standard is
ISO 8217 INTERNATIONAL STANDARD. Petroleum products Fuels (class F) Specifications of marine fuels
INTERNATIONAL STANDARD ISO 8217 Third edition 2005-11-01 Petroleum products Fuels (class F) Specifications of marine fuels Produits pétroliers Combustibles (classe F) Spécifications des combustibles pour
GB Translated English of Chinese Standard: GB NATIONAL STANDARD
Translated English of Chinese Standard: GB17930-2016 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 75.160.20 E 31 GB 17930-2016 Replacing
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60296 Third edition 2003-11 Fluids for electrotechnical applications Unused mineral insulating oils for transformers and switchgear IEC 2003 Copyright - all rights reserved No
Part 7-2: Test methods Single cell and stack performance tests for solid oxide fuel cells (SOFC)
ISBN 978-0-626-30629-8 IEC TS 62282-7-2:2014 SABS STANDARDS DIVISION Technical specification Fuel cell technologies Part 7-2: Test methods Single cell and stack performance tests for solid oxide fuel cells
SOUTH AFRICAN NATIONAL STANDARD
ISBN 0-626-18502-5 SANS 60335-2-76:2006 IEC 60335-2-76:2006 SOUTH AFRICAN NATIONAL STANDARD Household and similar electrical appliances Safety Part 2-76: Particular requirements for electric fence energizers
GB Translated English of Chinese Standard: GB NATIONAL STANDARD
Translated English of Chinese Standard: GB18351-2015 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 75.160.20 E 31 GB 18351-2015 Replacing
ISO 8665 INTERNATIONAL STANDARD. Small craft Marine propulsion reciprocating internal combustion engines Power measurements and declarations
INTERNATIONAL STANDARD ISO 8665 Third edition 2006-06-01 Small craft Marine propulsion reciprocating internal combustion engines Power measurements and declarations Petits navires Moteurs marins de propulsion
EAST AFRICAN STANDARD. Automotive gasoline (premium motor spirit) Specification EAST AFRICAN COMMUNITY. HS (regular); HS
EAST AFRICAN STANDARD Automotive gasoline (premium motor spirit) Specification EAST AFRICAN COMMUNITY HS 2710.11.10(regular); HS 2710.11.10(premium) ICS 75.160.20 EAS 2011 Second Edition 2011 ii Table
SOUTH AFRICAN NATIONAL STANDARD
ICS 83.080.20; 83.140.30 ISBN 0-626-14156-7 SANS 12107:2003 SOUTH AFRICAN NATIONAL STANDARD Plastics piping systems Injection-moulded thermoplastics fittings, valves and ancillary equipment Determination
Annex no. 1 of Accreditation Certificate no. LI 333 from
Valid from 04.02.2008 to 04.02.2012 Oil Products Laboratory DJ No. 226, Nvodari, Constana county belonging to SC ROMPETROL QUALITY CONTROL SRL 1 2 3 4 Physical tests 1. Determination of the density with
Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion
IAS Accreditation Number Company Name Address Contact Name Telephone +966-14-398-2118 Effective Date of Scope May 1, 2018 Accreditation Standard ISO/IEC 17025:2017 TL-743 Yanbu Industrial Area Yanbu, Madina
SCOPE OF ACCREDITATION
Standards Council of Canada 600-55 Metcalfe Street Ottawa, ON K1P 6L5 Canada Conseil canadien des normes 55, rue Metcalfe, bureau 600 Ottawa, ON K1P 6L5 Canada SCOPE OF ACCREDITATION InnoTech Alberta Inc.
DRAFT UGANDA STANDARD
DRAFT UGANDA STANDARD DUS 249-5 Second Edition 2018-mm-dd Engine Oils Performance Classification Part 5: Specification for Internal Combustion engine oils used in twostroke cycle motorcycle gasoline engines
Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17640-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 18.12.2017 to 04.11.2018 Holder of certificate: Haltermann
Paragon Scientific Ltd Proficiency Testing Scheme Schedule
Paragon Scientific Ltd Proficiency Testing Scheme Schedule Proficiency Testing Scheme Schedule Page 1 of 16 Issue : 29/01/2015 Print : 25/06/2018 Viscosity ASTM D445 - Standard Test Method for Kinematic
ISO 8217 INTERNATIONAL STANDARD. Petroleum products Fuels (class F) Specifications of marine fuels
INTERNATIONAL STANDARD ISO 8217 Fourth edition 2010-06-15 Petroleum products Fuels (class F) Specifications of marine fuels Produits pétroliers Combustibles (classe F) Spécifications des combustibles pour
Fuel oils Specification
TANZANIA STANDARD CDC15 (4029)P3 (Rev. of TZS 673:2014) Fuel oils Specification 0 Foreword This Tanzania Standard was prepared under the direction of Petroleum and Petroleum Products Technical committee,
GB Translated English of Chinese Standard: GB NATIONAL STANDARD OF THE
Translated English of Chinese Standard: GB17930-2013 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 75.160.20 E 31 GB 17930-2013 Replacing
This document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 13738 Second edition 2011-07-01 Lubricants, industrial oils and related products (class L) Family E (Internal combustion engine oils) Specifications for two-stroke-cycle gasoline
ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 14396 First edition 2002-06-01 Reciprocating internal combustion engines Determination and method for the measurement of engine power Additional requirements for exhaust emission
ISO INTERNATIONAL STANDARD. Gas turbines Procurement Part 3: Design requirements
INTERNATIONAL STANDARD ISO 3977-3 Second edition 2004-08-15 Gas turbines Procurement Part 3: Design requirements Turbines à gaz Spécifications pour l'acquisition Partie 3: Exigences de conception Reference
SOUTH AFRICAN NATIONAL STANDARD
ICS 75.160.20 ISBN 0-626-17621-2 SANS 465:2005 Edition 1 SOUTH AFRICAN NATIONAL STANDARD Standard specification for denatured fuel ethanol for blending with gasolines for use as automotive spark-ignition
EDICT ± OF GOVERNMENT
EDICT ± OF GOVERNMENT Inordertopromotepubliceducationandpublicsafety,equal justiceforal,abeterinformedcitizenry,theruleoflaw,world tradeandworldpeace,thislegaldocumentisherebymade availableonanoncommercialbasis,asitistherightofal
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 6 Prenton Way Contact: Dr J Roberts North Cheshire Trading Estate Tel: +44 (0)151 649 9955 Prenton Fax: +44 (0)151 649 9977 Wirral E-Mail:
This document is a preview generated by EVS
CEN WORKSHOP CWA 15375 August 2005 AGREEMENT ICS 47.020.30 English version Separators for marine residual fuel - Performance testing using specific test oil This CEN Workshop Agreement has been drafted
Draft Indian Standard SYN GAS/ AMMONIA TURBO COMPRESSOR LUBRICATING OILS SPECIFICATION
Comments Only BUREAU OF INDIAN STANDARDS Draft Indian Standard Doc:PCD 3(2537)C September 2012 SYN GAS/ AMMONIA TURBO COMPRESSOR LUBRICATING OILS SPECIFICATION Not to be reproduced without the permission
MILITARY SPECIFICATION LUBRICATING OIL, VACUUM PUMP, MECHANICAL
INCH-POUND MIL-DTL-83767C 24 September 2007 SUPERSEDING MIL-L-83767B 8 February 1980 MILITARY SPECIFICATION LUBRICATING OIL, VACUUM PUMP, MECHANICAL Reactivated after 24 September 2007 and may be used
1.1 Unless otherwise stated, the specification references and test methods are from the latest version in effect at the time of this contract.
(Page 1 of 6) LUBRICATING PRODUCTS MGS-92-12K 1.0 DESCRIPTION. This specification covers motor vehicle lubricating products for delivery in prepackaged containers such as drums, pails, etc., or for delivery
ASTM D Standard Specification for Biodiesel Fuel (B 100) Blend Stock for Distillate Fuels
ASTM D 6751 02 Standard Specification for Biodiesel Fuel (B 100) Blend Stock for Distillate Fuels Summary This module describes the key elements in ASTM Specifications and Standard Test Methods ASTM Specification
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 LABORATORY SERVICES, PETROTRIN Southern Main Road Pointe-A-Pierre, Trinidad, Trinidad & Tobago Peter Bhim Phone: 868 658 4200 CHEMICAL Valid To: November 30,
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK SGS West Thurrock Laboratory Contact: David Mercer (Laboratory Manager) 859 London Road Tel: +44 (0)1708 681943 West Thurrock Fax: +44 (0)1708
ISO INTERNATIONAL STANDARD
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 11158 Second edition 2009-09-15 Corrected version 2009-12-01 Lubricants, industrial oils and related products (class L) Family H (hydraulic systems)
PETROLEUM PRODUCTS INSPECTION OPERATIONS MANUAL
Kenya Bureau of Standards PETROLEUM PRODUCTS INSPECTION OPERATIONS MANUAL 2016-01-14 Version 2.0 Page 1 1.0 INTRODUCTION 1.1 Purpose and Background This manual provides a frame work for inspection of petroleum
ISO 4925 INTERNATIONAL STANDARD. Road vehicles Specification of non-petroleum-base brake fluids for hydraulic systems
INTERNATIONAL STANDARD ISO 4925 Second edition 2005-02-01 Road vehicles Specification of non-petroleum-base brake fluids for hydraulic systems Véhicules routiers Spécifications pour liquides de frein à
DEPARTMENT OF TRADE AND INDUSTRY NO APRIL 2016
Trade and Industry, Department of/ Handel en Nywerheid, Departement van 438 National Regulator for Compulsory Specifications Act (5/2008): Amendments to the Compulsory Specification for Earth Leakage Protection
ISO INTERNATIONAL STANDARD. Diesel engines NOx reduction agent AUS 32 Part 1: Quality requirements
INTERNATIONAL STANDARD ISO 22241-1 First edition 2006-10-15 Diesel engines NOx reduction agent AUS 32 Part 1: Quality requirements Moteurs diesel Agent AUS 32 de réduction des NOx Partie 1: Exigences de
This document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 15380 Third edition 2016-12-01 Lubricants, industrial oils and related products (class L) Family H (Hydraulic systems) Specifications for hydraulic fluids in categories HETG,
ISO INTERNATIONAL STANDARD. Diesel engines NOx reduction agent AUS 32 Part 1: Quality requirements
INTERNATIONAL STANDARD ISO 22241-1 First edition 2006-10-15 Diesel engines NOx reduction agent AUS 32 Part 1: Quality requirements Moteurs diesel Agent AUS 32 de réduction des NOx Partie 1: Exigences de
DRAFT EAST AFRICAN STANDARD
ICS 75.160.20 DRAFT EAST AFRICAN STANDARD Automotive gasoline (premium motor spirit) Specification EAST AFRICAN COMMUNITY EAC 2018 Third Edition 2018 Copyright notice This EAC document is copyright-protected
ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 20847 First edition 2004-03-15 Petroleum products Determination of sulfur content of automotive fuels Energy-dispersive X-ray fluorescence spectrometry Produits pétroliers Détermination
ISO INTERNATIONAL STANDARD. Earth-mover tyres and rims Part 3: Rims. Pneumatiques et jantes pour engins de terrassement Partie 3: Jantes
INTERNATIONAL STANDARD ISO 4250-3 Fourth edition 2011-05-01 Earth-mover tyres and rims Part 3: Rims Pneumatiques et jantes pour engins de terrassement Partie 3: Jantes Reference number ISO 4250-3:2011(E)
DRAFT UGANDA STANDARD
DUS EAS 854 First Edition 2015-mm-dd Thinner for nitrocellulose resin-based paints and lacquers Specification Reference number DUS EAS 854: 2015 UNBS 2015 DUS EAS 854:2015 Compliance with this standard
This document is a preview generated by EVS
TECHNICAL SPECIFICATION ISO/TS 17306 First edition 2015-02-01 Petroleum products Biodiesel Determination of free and total glycerin and mono-, di- and tracylglycerols by gas chromatography Produits pétroliers
This document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 23671 Second edition 2015-09-01 Passenger car tyres Method for measuring relative wet grip performance Loaded new tyres Pneumatiques pour voitures particulières Méthode de mesure
Standard Diesel & FCC Additive Technical Analysis on Lubricity
Revision A Standard Diesel & FCC Additive Technical Analysis on Lubricity ADDF-REP-TA-0002 Michelle Lam Disclaimer: The content of this technical shall only summarise the information and results provided
ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 20918 First edition 2007-10-15 Road vehicles Braking threshold pressures for heavy commercial vehicle combinations with fully pneumatic braking systems Test with roller brake
This document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 12405-1 First edition 2011-08-15 Electrically propelled road vehicles Test specification for lithium-ion traction battery packs and systems Part 1: High-power applications Véhicules
ISO INTERNATIONAL STANDARD. Small craft Permanently installed fuel systems. Petits navires Systèmes à carburant installés à demeure
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 10088 Third edition 2009-09-01 Small craft Permanently installed fuel systems Petits navires Systèmes à carburant installés à demeure Reference
ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 14635-3 First edition 2005-09-15 Gears FZG test procedures Part 3: FZG test method A/2,8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid
This document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 16861 First edition 2015-05-15 Petroleum products Fuels (class F) Specifications of dimethyl ether (DME) Produits pétroliers Combustibles (classe F) Spécifications du diméthyléther
IGS-M-CH-044-1(0) Sept IGS. Iranian Gas Standards !" #$%&' () Insulating Oils for use in Power Transformers Part 1
IGS-M-CH-044-1(0) Sept. 2008 APPROVED IGS Iranian Gas Standards!" #$%&' () Insulating Oils f use in Power Transfmers Part 1. Fax:(9821)-8131-5679 1123 456728 9:1;7?7 @A9?;1 BE8 4FG= HA2IJ 4K LMN
ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 8178-2 Second edition 2008-04-15 Reciprocating internal combustion engines Exhaust emission measurement Part 2: Measurement of gaseous and particulate exhaust emissions under
ISO INTERNATIONAL STANDARD. Lubricants, industrial oils and related products (Class L) Family X (Greases) Specification
INTERNATIONAL STANDARD ISO 12924 First edition 2010-05-01 Lubricants, industrial oils and related products (Class L) Family X (Greases) Specification Lubrifiants, huiles industrielles et produits connexes
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 62391-2 First edition 2006-04 Fixed electric double-layer capacitors for use in electronic equipment Part 2: Sectional specification Electric double-layer capacitors for power
Certificate of Accreditation
Certificate of Accreditation ISO/IEC 17025:2005 Certificate Number L2264.03 Analysts, Inc. 2450 Hassell Road Hoffman Estates IL 60195 has met the requirements set forth in L-A-B s policies and procedures,
EAST AFRICAN STANDARD
DEAS 186:2013 ICS 71.100.40 Toilet soap Specification EAST AFRICAN STANDARD EAST AFRICAN COMMUNITY HS 3401.11.0000 EAS 2013 Second Edition 2013 Table of contents 1 Scope... 1 2 Normative references...
ISO 3838 INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 3838 Second edition 2004-05-01 Crude petroleum and liquid or solid petroleum products Determination of density or relative density Capillarystoppered pyknometer and graduated
ISO 3679 INTERNATIONAL STANDARD. Determination of flash point Rapid equilibrium closed cup method
INTERNATIONAL STANDARD ISO 3679 Third edition 2004-04-01 Determination of flash point Rapid equilibrium closed cup method Détermination du point d'éclair Méthode rapide à l'équilibre en vase clos Reference
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60269-1 Edition 3.1 2005-04 Edition 3:1998 consolidated with amendment 1:2005 Low-voltage fuses Part 1: General requirements IEC 2005 Copyright - all rights reserved No part
FINAL DRAFT BELIZE STANDARD SPECIFICATION FOR UNLEADED GASOLINE FOR MOTOR VEHICLES. ooooooooooooooooooooo
ISSUED FOR COMMENTS ONLY oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo FINAL DRAFT BELIZE STANDARD SPECIFICATION FOR UNLEADED GASOLINE FOR MOTOR VEHICLES ooooooooooooooooooooo
PETROLEUM LABORATORY TESTING AND OPERATIONS
* FM 10-67-2 Field Manual No. 10-67-2 HEADQUARTERS DEPARTMENT OF THE ARMY Washington, DC, 2 April 1997 PETROLEUM LABORATORY TESTING AND OPERATIONS Table of Contents Page PREFACE CHAPTER 1 I CHAPTER 2 I
ISO INTERNATIONAL STANDARD. Mopeds Methods for setting the running resistance on a chassis dynamometer
INTERNATIONAL STANDARD ISO 28981 First edition 2009-11-01 Mopeds Methods for setting the running resistance on a chassis dynamometer Cyclomoteurs Méthodes pour fixer la résistance à l'avancement sur un