Material Testing TEXTILE/LEATHER TESTER. Digital Bursting and Strength Tester Strength Tester. Manual Wrap Reel Motor Wrap Reel Spray Tester
|
|
- Sheena Margaret Allen
- 6 years ago
- Views:
Transcription
1 TEXTILE/LEATHER TESTER Bursting and Strength Tester Digital Bursting and Strength Tester Accesories Bursting and Strength Tester Manual Wrap Reel Motor Wrap Reel Spray Tester Motor Twist Tester Yarn Inspector AATCC Perspiration Tester Dyeing Rubbing Tester 1
2 Water Penetration Tester Water Penetration Tester (Portable Type) Abrasion Tester Stiffness Tester ElmendorfTearing StrengthTester Pneumatic Specimen Press Aging Oven Discoloration Chamber Crock meter (Digital/Manual) 2
3 Color Viewing Booth Textile Sample Cutter Compression & Deformation Tester RUBBER/PLASTIC TESTER Material Testing Machine Manual Forming Machine Electrical Forming Machine Manual Specimen Punch Cutter for Hardness Specimen 3
4 Pneumatic Specimen Punch AKRON Abrasion Tester Abrasion Tester Droping Impact Tester Universal Impact Tester Coating/Printing Tester General Spec: > Equiped with IZOD & CHARPY Digital Impact Tester Mechanical Impact Tester General Spec: > Equiped with IZOD & CHARPY > Included machine energy loss calculation. > Ability to measure how many capacity need to break the brittle material. General Spec: > Equiped with IZOD & CHARPY > Included machine energy loss calculation. 4
5 Impact Specimen Angel Cutting Device Dupont Impact Tester Stiffness Tester General Spec: > To produce sample for IZOD & CHARPY > Ability to cut various V depth according to standard. > Ability to cut at different angle. Heat Deflection Tester Gravity Meter General Spec: > To test fine, thin material such bristle, soft sheet...etc > Can be set various angle and length of specimen > To determine the hardness of specimen by test at max bending force. Holder for Hardness Gauge > Heat Deflection tester is used to test material deflection at certain temperature and under specific load. It is suitable to test material which is still rigid when at temperature 27. > The Gravity Meter is designed according to the Principle of Archimedes. The appearance of the testing sample is not limited, so it s more easy to use. 5
6 TORQUE TESTER Closure Torque Tester Vertical Torque Tester Horizontal Torque Tester > This equipment is specialized for testing the torsion force of bottle top. Motorize Torque Tester > This tester is vertical type, is used for testing torque force under 50N-M, like bottle cap, electrical component, able process breaking torque, torsion fatigue and angle of torsion fatigue test, and increase positive press on specimen. Screw Puncture Tester > Torque Tester measures the torque of electric, manual and pneumatic tool, also including torque of screws and nuts. It is suitable for general torque tests, fatigue and angle fatigue tests. > This tester provides a constant load and speed to test how long the screw would take to go through a steel plate. PAPER TESTER Carton Compression Tester MIT Folding Endurance Tester > MIT Folding Endurance Tester provides a specific load and in a angle of ±135 to fold the specimen. > For testing the folding endurance for materials of circuit soft board, copper foil, paper etc. 6
7 ELECTRONIC MATERIAL TESTER FPC Flexible Testing Machine High Teperature Tensile (Compression) Tester > This High Temperature Tensile (Compression) Tester with a extra extending space to be used with a oven, it can provides a high temperature testing environment. > FPC Flexible Testing Machine specialized in testing the using of life flexible circuit in its motion directions. Surface Hardness Abrasion Tester > This machine allows user to test the abrasion endurance of baking lacquers, coating, electroplating and dyeing with sand bar, white cloth or steel wool. Electric Plug/Cord Bending Tester > This machine mainly aims at the bending endurance test of cables. When the cables break, the machine will record the bending times. 7
8 TAPE TESTER Holding Power Tester Tape Retentively Tester Holding Power Chamber > This tester is aim to test the adhesive strength of tape under static load. Calculate the keeping time of tapes under a specified load, to know the adhesive strength and using life of tapes. > This tester is aim to test the adhesive strength of tape under static load. Calculate the keeping time of tapes under a specified load, to know the adhesive strength and using life of tapes. > This device is used for test tape adhesive strength under high temperature and constanttemperature motionless static load condition. Manual Roller Motorize Roller > It allows user to prepare the peel test specimen to make tape adhere to steel plate evenly. Tape Initial Adhesion PSTC Tape Initial Adhesion 8
9 UNIVERSAL TESTING MACHINE Computer Server H/L Temperature Tensile Tester Horizontal Tensile Tester 9
10 Acessories 10
11 SPRING TESTER Spring Twist test Machine > Spring twist test machine specialized in large test range, fast speed, and test angle operated by program. > To test the fatigue of torsion of spring is to design a unit fixture according to different type of spring, to set the fixture on testing place and to do the torsion test in different angles. PACKING TESTER Pneumatic Type Drop Tester > It only takes a small space to operate and is ideally suited for testing the impact of cartons, luggage cases, suitcases, electric equipment, etc. 11
Asian Test Equipment. Laboratory Solution by AN ISO 9001:2008 CERTIFIED COMPANY. Tensile Strength Tester. Indentation Hardness Tester
AN ISO 9001:2008 CERTIFIED COMPANY Tensile Strength Tester Indentation Hardness Tester Box Compression Tester Bursting Strength Tester Specific Gravity Balance Hot Air Oven Toxicity Tester Flexometer Melt
More informationPresident For the Accreditation Council Certificate Number Valid to August 31, 2008
A2LA has accredited THE AMERICAN ASSOCIATION FOR LABORATORY ACCREDITATION ACCREDITED LABORATORY PEARL LEATHER FINISHERS, INC. TESTING LABORATORY Johnstown, NY for technical competence in the field of Mechanical
More informationMechanical Testing Solutions for Lithium-Ion batteries in Automotive applications
Intelligent Testing Mechanical Testing Solutions for Lithium-Ion batteries in Automotive applications A. Koprivc testxpo 2017 Mechanical testing solutions for Li-Ion batteries Contents Lithium-ion batteries
More informationAccessories for Force Test Stands, Universal Testers and Tensile Testers
Accessories for Force Test Stands, Universal Testers and Tensile Testers Compatible with: Fixtures, General, Page 1 MT-500 MT-1500 MT-2500 PEEL TEST FIXTURE, 180 DEGREE, ASTM D-903 Force Test Stand Universal
More informationGeomembrane Test Methods
Appendix 2 Geomembrane Test Methods AMERICAN SOCIETY FOR TESTING AND MATERIALS (arranged by number) ASTM D-5 ASTM D-36 ASTM D-256 ASTM D-412 ASTM D-413 ASTM D-471 ASTM D-570 ASTM D-638 ASTM D-696 ASTM
More informationAhmedabad Textile Industry s Research Association (ATIRA), P.O. Ambawadi Vistar, Ahmedabad, Gujarat
Last Amended on - Page 1 of 13 I. TEXTILE MATERIALS 1. Fibre Micronaire Length Length uniformity Strength Elongation% Short fibre % Colour Whiteness (Rd) Colour Yellowness (+b) Neps/g Neps size SCN/g SCN
More informationMIRTA-KONTROL d.o.o. LABORATORY DEPARTMENT
Textiles 1) Fibre composition - Qualitative analysis (Internal MK method) 2) Fibre composition - Binary fibre mixtures (EN ISO 1833-series) 3) Fibre composition - Ternary fibre mixtures (EN ISO 1833-2)
More informationReview Paper on Design and Development of Coupling Torque Endurance Test Machine with Variable Torque and Chamber Adjustment
Review Paper on Design and Development of Coupling Torque Endurance Test Machine with Variable Torque and Chamber Adjustment 1. Mr. Borude S.C.(P.G. Student, JSPM s ICOER, Pune), 2.Prof. Biradar N.S.(HOD
More informationAUTOMOTIVE TESTS. BMW AUTOMOTIVE Pile Yarn Thickness $ 25.00
AUTOMOTIVE TESTS BMW AUTOMOTIVE3.2.4.2 Pile Yarn Thickness $ 25.00 BMW 3.2.10 Imprint Behavior Without Foam Impression Depth @ 60 Minutes and 24 hours (DIN 54316/EN20 105 A02) $ 75.00 BMW 3.2.10.2 Tested
More informationDILLARD S TEST PROTOCOL FOR DILR US LUGGAGE (V26)
Test Date: Reviewed By/Date: SUPPLEMENTAL PROTOCOLS DILLARD S TEST PROTOCOL FOR 1 The sample shall be reviewed against the requirements of California Proposition 65 to determine if additional testing or
More informationBolt-On/Rugged Fender Flares Nissan Titan (04-15) Please read instructions entirely before installing this product.
Please read instructions entirely before installing this product. Hardware Included QTY FUEL DOOR CLIP 1 Bolt Kit Included QTY ALCOHOL TOWELETTE 4 M4 SCREW 1 ALLEN KEY BOLT 42 CLIP.9MM 2 ABRASIVE RESISTANT
More informationFor securing wire terminals, cables, connectors, and other samples for pull testing [36.8] 1.0 [25.4]
For securing wire terminals, cables, connectors, and other samples for pull testing. G1001 0-0.125 [0-3.1] G1001-1 [1000] 0.29 [0.13] 3.40 [86.4] 0.125 - [3.1-6.3] 1.45 [36.8] G1001-2 - 0.375 [6.3-9.5]
More informationFor securing wire terminals, cables, connectors, and other samples for pull testing [36.8] 1.0 [25.4]
For securing wire terminals, cables, connectors, and other samples for pull testing. G1001 0-0.125 [0-3.1] G1001-1 0.29 [0.13] 3.40 [86.4] 0.125 - [3.1-6.3] 1.45 [36.8] G1001-2 - 0.375 [6.3-9.5] Includes
More informationGENUINE REAR SPOILER
GENUINE REAR SPOILER IMPORTANT POINTS IN PAINTING PART NAME: REAR SPOILER PART NUMBER: 0000-8Y-H50/GHK1 V4 920/G44B V4 920 VEHICLE: MAZDA6 1 PAINT AREAS SURFACE TREATMENT a : Paint same as body color b
More informationFor securing wire terminals, cables, connectors, and other samples for pull testing [36.8] 1.0 [25.4]
Page 1 of 15 Wire terminal grips u All dimensions shown as IN [MM] For securing wire terminals, cables, connectors, and other samples for pull testing. ØA B C D G1001 0-0.125 [0-3.1] G1001-1 [1000] 0.29
More informationFECR. World Class Testing Equipments An ISO 9001 Certified co. Paper & Packaging Equipments
FECR World Class Testing Equipments An ISO 9001 Certified co. Paper & Packaging Equipments Bursting Strength Testing Humidity Chamber / Conditioning Chamber Bursting Strength is reliable index of the strength
More informationServices Directory updated: January 2016
Kulmbacher Straße 76 95213 Münchberg Tel. 09281/409-8720 Fax 09281/409-8799 E-mail: pruefamt@hof-university.de Director: Prof. Oliver Lottes Services Directory updated: January 2016 A) Mechanical and Technological
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
(part of Smithers Rapra and Ltd) Packaging Technical Services Cleeve Road Leatherhead Surrey KT22 7RU Contact: Mr G Collis Tel: +44 (0)1372 802000 Fax: +44 (0)1372 802245 E-Mail: gcollis@smithers.com Website:
More informationStandard G50 90 degree Table with cable to upper machine crosshead and G227 upper grips
G50 90 Degree Peel Test Fixtures G50 test fixtures are ideal to test inflexible adherends for which a 180 peel test is not suitable because of the cracking, breaking or delamination of the adherend. The
More informationMIL-STD-883G METHOD LEAD INTEGRITY
LEAD INTEGRITY 1. PURPOSE. This method provides various tests for determining the integrity of microelectronic device leads (terminals), welds, and seals. Test condition A provides for straight tensile
More informationThis tester is designed for conducting tensile, compression, bending, shearing, bonding strength,
FOOTWEAR TESTING GT-K01 Universal Testing Machine (Dual Column) This tester is designed for conducting tensile, compression, bending, shearing, bonding strength, peeling, tearing and other tests for shoes,rubber,
More informationGB/T Translated English of Chinese Standard: GB/T NATIONAL STANDARD
Translated English of Chinese Standard: GB/T25978-2010 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 43.020 T 04 GB/T 25978-2010 Road vehicles
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. ACCULAB INC Railroad Drive El Paso, TX Vladimir Juarez Phone: MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ACCULAB INC. 9900 Railroad Drive El Paso, TX 79924 Vladimir Juarez Phone: 915 751 1000 MECHANICAL Valid To: June 30, 2016 Certificate Number: 2692.01 In recognition
More informationPage 1 of 16. LEAD TIME START END MES PW PT001J (Interior/Exterior Plastic Parts For Decoration)
MES PW PT001J (Interior/Exterior Plastic Parts For Decoration) Delloyd shall do the test 1. Rigidity To evaluate, from the viewpoint of appearance, both the rigidity of parts (1) Deflection shall meet
More informationThe GK units differ from the LK units in that the springs of the GK units have a spring eye at the front.
01 09 Installation guidelines Mechanical suspension units GK LK GN0032-0 Mechanical suspension units GK LK The GK units differ from the LK units in that the springs of the GK units have a spring eye at
More information- New Superpave Performance Graded Specification. Asphalt Cements
- New Superpave Performance Graded Specification Asphalt Cements 1 PG Specifications Fundamental properties related to pavement performance Environmental factors In-service & construction temperatures
More informationREV READ BEFORE INSTALLATION OF KIT:
REV. 05-08 QTY 3D PN. FCS PART NUMBER DESCRIPTION 1 691509 A7EDG-7820049-AAPLN EDGE BODY KIT- V6 B PCS & EXH TIPS 1 691256 A 7 E D G - 7 8 20049-BAPLN EDGE BODY KIT- V6 8PCS & EXH TIPS W/HITCH 1 691501
More informationQTY 3D PN. FCS PART NUMBER DESCRIPTION
QTY 3D PN. FCS PART NUMBER DESCRIPTION 1 691544 A8FOC-17B635-APL FOCUS FRONT AIR DAM 1 691549 A8FOC-17E957-APL FOCUS REAR LOWER 1 691548 A8FOC-10154-APL FOCUS RIGHT SIDE SKIRT 1 691547 A8FOC-10155-APL
More informationBolt-On/Rugged Fender Flares Dodge Ram 1500/2500/3500 (09-12) Please read instructions entirely before installing this product.
Please read instructions entirely before installing this product. Hardware Included QTY Hardware Included QTY Bolt Kit Included QTY EXTRUSION 29.0ft ALCOHOL TOWELETTE 4 ALLEN KEY BOLT 42 NUT 42 Ensure
More informationRELIABLE ANALYSIS INC. Troy, MI for technical competence in the field of
A2LA has accredited RELIABLE ANALYSIS INC. Troy, MI for technical competence in the field of Mechanical Testing This laboratory is accredited in accordance with the recognized International ISO/IEC 17025:2005
More informationASTM STANDARDS ON PSA TAPE
ASTM STANDARDS ON PSA TAPE Richard L Sheehan, 3M, St Paul, MN ASTM International is a not-for-profit, independent, standards writing organization. It develops and publishes voluntary consensus standards
More informationMetal package testing
Metal package testing Gauges for dimensional measurement, and testers for package integrity and failure analysis. Manual and semiautomatic solutions for ensuring quality in food, beverage, and aerosol
More informationLabthink Instruments Co. Limited http://www.labthinktestinstruments.com/ We are engaged in manufacturing, supplying, and exporting a comprehensive gamut of Testing Equipment like Permeability Test, Tensile
More informationStandard G50 90 degree Table with cable to upper machine crosshead and G227 upper grips. G Width 130 mm (5.1 )
G50 Peel Test Fixture 90 Degrees with optional angle adjustment laminated surface coatings films packaging and rigid backings The G50 test fixture is ideal to test inflexible adherends for which a 180
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. ACCULAB INC Railroad Drive El Paso, TX Jose Gonzalez Phone: MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ACCULAB INC. 9900 Railroad Drive El Paso, TX 79924 Jose Gonzalez Phone: 915 751 1000 MECHANICAL Valid To: June 30, 2020 Certificate Number: 2692.01 In recognition
More informationTYPICAL EXPERIMENTS Centers of gravity. Force triangle. Force polygon and Bow s Notation. Non- concurrent forces.
MM 500-001 BASIC PANEL The panel is made from a perforated stainless steel sheet mounted on two supports with adjustable footings. The panel can be tilted, put in portrait or landscape position. Accessories
More informationQTY 3D PART NO. DESCRIPTION
QTY 3D PART NO. DESCRIPTION 1 691032 V6 FRONT AIR DAM 1 691023 SIDE SKIRT RIGHT 1 691024 SIDE SKIRT LEFT 1 691566 V6 DUAL EXHAUST REAR LOWER SKIRT- 8 3M 94 3M ADHESION PROMOTER 24 #8 X ¾ SELF DRILLING
More informationKre 8. Solar Powered Racer V4d
Solar Powered Racer V4d (OR Battery Powered Car) 1 Solar (sun powered) Racer OR battery powered racer This electric powered racer can be powered using direct sunlight (using the solar panel) * OR a battery
More informationLabthink Instruments Co. Limited www.labthinktestinstruments.com We are engaged in manufacturing, supplying, and exporting a comprehensive gamut of Testing Equipment like Permeability Test, Tensile Test,
More informationExpedition Front Bumper Instructions
Expedition Front Bumper Instructions QTY 3D PN. FCS PART NUMBER DESCRIPTION 1 691256 A 8 E X D - 1 7 B 635-AAPLN FRONT BUMPER REPLACEMENT HARDWARE SUPPLIED 10 SELF TAPING SCREWS -10 for Front Bumper PLASTIC
More informationamicus task, general use & guest
amicus task, general use & guest reinforced nylon scuff-resistant plastic " base 0mm ( 1/") hard (carpet casters) reinforced nylon twin-wheeled and hooded 1/" hard plastic glides soft glides have soft
More informationVibration damping precision couplings
Vibration damping precision couplings In light of the advantages of elasticity, strength, resilience, and damping effects, elastomer materials are now being used in most areas of mechanical engineering.
More informationOX2/231 i-oxtra OX2/230 i-oxtra VAC-V2 i-gastra 7100
Classic Series Product Name & Description Classic + Big Data Standards To Follow OX2/231 i-oxtra 7600 Oxygen Permeability Tester This tester utilizes the coulometric sensor method to test the oxygen transmission
More informationMITRAS MATERIALS GMBH
MITRAS MATERIALS GMBH Friedrich-Ochs-Str. 2 92637 Weiden/Opf. Tel.: 0961 / 89-810 / 89-812 Fax: 0961 / 89-672 Directory of services L a b o r a t o r y MITRAS MATERIALS GMBH Edition 02/18 Rev. 08 page
More informationTEST FACILITIES AT SQAE(GS), KOLKATA LAB STORES DTE Name of Estt with address, Name of Srl.No Nodal officer and contact No
TEST FACILITIES AT, KOLKATA LAB STORES DTE Name of Estt with address, Name of Srl.No Testing Facilities Available Range of Test Eqpt. TEXTILE (MECHANICAL) 1 Yarn Strength Tester 5 Kg / 20 Kg 2 Vertical
More informationForceBoard - Desktop friction, wear, tensile and fatigue testing system
ForceBoard.com ForceBoard - Desktop friction, wear, tensile and fatigue testing system Made in Sweden by Industrial Dynamics AB Hardware Note: If you have special requests on the hardware we can solve
More informationName of Laboratory : SGS CAMBODIA LABORATORY Accreditation Number : Testing : 1076 A-C, Street 371, Sangkat Stung Meanchey, Khan Meanchey,
Name of Laboratory Contact Person : Mr. Sopheak Chea Phone : + 855 23 967 888 Fax : - Email : Sopheak.Chea@sgs.com 1 Textiles - Colour fastness to light : ISO 105-B02 : 2014 Xenon-Arc BS EN ISO 105-B02
More informationTLS ADVANCED SOLUTIONS FOR QUALITY CONTROL AND TESTING MATERIALS
A brand of TLS ADVANCED SOLUTIONS FOR QUALITY CONTROL AND TESTING MATERIALS TECHLAB SYSTEMS, S.L. is a company which specialises in designing, developing, manufacturing and marketing advanced technologies
More informationFOOD & BEVERAGE HOSE
FOOD & BEVERAGE 7 Hoses all require a tube that will not contaminate the food product being conveyed. In the same way that rubbers and thermoplastics are formulated to handle different chemicals, gases
More informationUL Quality Assurance Private Limited, A-12,Sector-34, Infocity Phase-1,Gurgaon; Haryana. Discipline Mechanical Testing Issue Date
Last Amended on - Page 1 of 22 I. TEXTILE MATERIALS 1. Textile- Fabric/Garment Tensile Strength Strip test BS EN ISO 13934-1: 2013 EN ISO 13934-1: 2013 ISO 13934-1: 2013 ASTM D5035 2011 AS 2001.2.3.1:
More informationBMK-18 U.S. Patent #5,298,158
BMK- U.S. Patent #5,29,5 Marine Dual Remote Filtration System Mounting Kit Installation and Servicing Instructions IMPORTANT NOTICE Read all instructions completely before attempting to install this unit.
More informationRev TOOLS & MATERIALS REQUIRED QTY 3D PART NO. DESCRIPTION
Rev. 04-10 QTY 3D PART NO. DESCRIPTION 1 691609 FRONT BUMPER REPLACEMENT 1 691610 RIGHT SIDE SKIRT 1 691611 LEFT SIDE SKIRT 1 691612 REAR LOWER SKIRT 4 3M 94 3M ADHESION PROMOTER 16 #8 X ¾ SELF DRILLING
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 RELIABLE ANALYSIS SHANGHAI, INC. No. 10, 12A, 24 Lane 1365 Kang Qiao Road East Shanghai, People s Republic of China, 201319 Mr. Victor Wen Phone: 86 21 6818
More informationREVISION HISTORY REVISION NUMBER. DATE PAGE CONTENTS New 28-May-2015
Title 1 11 REVISION HISTORY REVISION NUMBER DATE PAGE CONTENTS New 28-May-2015 2 11 3 11 1.Scope This standard specifies EVFC whose rated voltage is 500V DC and breaking capacity is 10000A (hereinafter
More informationQTY 3D PN. FCS PART NUMBER DESCRIPTION
Rev.05-08 QTY 3D PN. FCS PART NUMBER DESCRIPTION 1 691224 A6ZEP-17B635-AAPLN MKZ FRONT AIR DAM 1 691202 A6ZEP-5410154-AAPLN MKZ SIDE SKIRT RH 1 691203 A6ZEP-5410155-AAPLN MKZ SIDE SKIRT LH 1 691225 A6ZEP-17E957-AAPLN
More informationBall Rail Systems RE / The Drive & Control Company
Ball Rail Systems RE 82 202/2002-12 The Drive & Control Company Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Standard Ball Rail Systems Super Ball Rail Systems Ball Rail Systems
More informationGLADIATOR. GLADIATOR Telescopic Steel Covers
GLADIATOR GLADIATOR Telescopic Telescopic steel covers are used to protect slideways in certain machine tool applications. They offer effective protection against swarf and other debris. Liquid or coolant
More informationGENUINE PARTS INSTALLATION INSTRUCTIONS
GENUINE PARTS INSTALLATION INSTRUCTIONS DESCRIPTION: APPLICATION: Moonroof Wind Deflector Nissan Altima PART NUMBER: 999D UZ000 KIT CONTENTS: Item Qty. Description Service Part Number A B C D E F G H 1
More informationCertificate of Accreditation
ISO/IEC 17025:2005 Certificate of Accreditation Certificate Number L2195 Exova, Inc. Anaheim 3883 East Eagle Drive Anaheim CA 92807 has met the requirements set forth in L-A-B s policies and procedures,
More informationBao Tong USA dba Tysonic Battery
Bao Tong USA dba Tysonic Battery 1032 East Main St., Alhambra, CA 91801 877-897-6648 (P) 626-576-2503 (F) WWW.TYSONICBATTERY.COM SPECIFICATION SHEET FOR IFR18650PC-1100 1 Scope This technical data stipulates
More informationFeb 2016 Product Information GRS Deltron Matt Textured Clearcoat System
GLOBAL REFINISH SYSTEM Feb 2016 Product Information GRS Deltron Matt Textured System PRODUCTS Deltron Semi Gloss Deltron UHS Express Deltron s Deltron Texture Additive Deltron Low VOC Thinners Semi Gloss
More informationNov 2016 Product Information GRS Deltron Matt Textured Clearcoat System
GLOBAL REFINISH SYSTEM Nov 2016 Product Information GRS Deltron Matt Textured System PRODUCTS Deltron Semi Gloss Deltron UHS Express Deltron s Deltron Texture Additive Deltron Low VOC Thinners D8135 D843
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS SHOWN WITH TUB-FILLER SET (NOT INCLUDED) MODEL: VINTAGE 690090 (RH-576L) 690040 (RH-576) REV C Restoration Hardware Diverter Trim Kit Product Size Specification Diagram Dimensions
More information--> Buy True-PDF --> Auto-delivered in 0~10 minutes. GB/T Translated English of Chinese Standard: GB/T
Translated English of Chinese Standard: GB/T25978-2018 www.chinesestandard.net Buy True-PDF Auto-delivery. Sales@ChineseStandard.net ICS 43.020 NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA GB T
More informationGLADIATOR. GLADIATOR Telescopic Steel Covers
Telescopic Steel Covers Telescopic steel covers are used to protect slideways in certain machine tool applications. They offer effective protection against swarf and other debris. Liquid or coolant ingress
More informationDARMAN. ENDURA II Cloth Towel Cabinet Product Guide. Manufacturing Company, Inc Lincoln Ave., Utica, NY 13502
ENDURA II Cloth Towel Cabinet Product Guide Page 2, 3 4, 5 6, 7 8, 9 10 11 12 Parts Covered Hood Assembly Mechanism Back Assembly Bin and Towel Guide Service Bulletin - Roller Warranty and Maintenance
More informationPEERLESS ELECTRIC INDUSTRIAL FANS
PEERLESS ELECTRIC INDUSTRIAL FANS HIGH QUALITY HIGH EFFICIENCY VERSATILITY TYPICAL INDUSTRIES PEERLESS ELECTRIC HAS SERVED FOR MORE THAN 95 YEARS HVAC Paint Chemical Clothing Leather Steel Aviation Plastic
More informationDyna -SPA. Highest Dynamic Speed with Longest Stroke for Simulation of: Universal Abrasion Universal Scratch Universal Punch and many more...
Dyna -SPA Highest Dynamic Speed with Longest Stroke for Simulation of: Universal Abrasion Universal Scratch Universal Punch and many more... Basic Function Highlights Fastest system for performing scratch/abrasion/punch
More informationDyna-SPA. Highest Dynamic Speed with Longest Stroke for Simulation of: Universal Abrasion Universal Scratch Universal Punch and many more...
Dyna-SPA Highest Dynamic Speed with Longest Stroke for Simulation of: Universal Abrasion Universal Scratch Universal Punch and many more... Basic Function Highlights Fastest system for performing scratch/abrasion/punch
More informationSeptember 16, 2016 VIA . UL Verification Services Inc. Arthur Rumpf 1559 King Street Enfield CT 06082
September 16, 2016 VIA EMAIL UL Verification Services Inc. Arthur Rumpf 1559 King Street Enfield CT 06082 Re: Extension for ISO/IEC 17025: 2005 accreditation Dear Arthur: This letter is to inform you that
More informationWEDGE ACTION GRIPS. Sliding Wedge, Self Tightening Grip, Manual and Pneumatic
WEDGE ACTION GRIPS Sliding Wedge, Self Tightening Grip, Manual and Pneumatic General purpose sliding wedge, self tightening grips supplied with straight cut faces as standard. Two additional face options
More informationProduct Data Sheet February 2016
Product Data Sheet February 2016 INTERNATIONAL MASTER FOR PROFESSIONAL USE ONLY 2K Matt Textured Clearcoat System Product Description Clearcoat Semi Gloss P190-6659 HS Plus Express Clearcoat Fine Texturing
More informationPreventive Maintenance and Calibration Program: IDM provides OEM services:
RUBBER Industry Product Guide Preventive Maintenance and Calibration Program: The IDM Preventive Maintenance and Calibration (PM&C) program has been designed to make the maintenance and calibration of
More informationSTS Directory Accreditation number: STS 0228
International standard: ISO/IEC 17025:2005 Swiss standard: SN EN ISO/IEC 17025:2005 TESTEX AG Schweizer Textilprüfinstitut Gotthardstrasse 61 CH-8027 Zürich Head: Responsible for MS: Dr. Jean-Pierre Haug
More informationKM 130/300 R Bp. Dual scraper. EASY Operation operating concept. Flexible Footprint System. Flat pleated filter
KM 130/300 R Bp Low-noise, battery powered industrial sweeper with three-wheel rear steering. For difficult jobs in the building material and metal-working industries, foundries and other dirt-intensive
More informationDODGE RAM WITHOUT FENDER FLARES FRONT MUD GUARD INSTALLATION INSTRUCTIONS
DODGE RAM WITHOUT FENDER FLARES FRONT MUD GUARD INSTALLATION INSTRUCTIONS PART NO: 5817 Please read instructions thoroughly before installation. Tools Required Short Phillips screwdriver Center punch Drill
More information«CHARPY» Computerized Pendulum IMPACT TESTERS
«CHARPY» Computerized Pendulum IMPACT TESTERS DIGITAL & COMPUTERIZED models of 300, 450 or 750 Joules capacity 300 J PIC-300/C model 450 J PIC-450/C model 750 J PIC-750/C model ASTM E 23 DIN UNE EN ISO
More informationHOSE - OIL/CHEMICAL & GENERAL PURPOSE
HOSE - OIL/CHEMICAL & ENERAL PURPOSE A430 - Oil Suction and Delivery Hose 10 bar Rubber: Lining: Reinforcement: Cover: Temperature range: - DB15 Designed for suction and discharge use on various petroleum
More informationGET WIRED FOR SUCCESS WITH NEW NORTON WIRE BRUSHES
GET D FOR SUCCESS WITH NEW BRUSHES When you need the perfect low-impact solution for refining surfaces without removing any base material, try our new line of Norton wire brushes. This new, economically
More informationTest Stands Motorized Test Stands
Motorized Test Stands Cycling capabilities enable precise and consistent results! Shimpo s advanced motorized test stands are designed as companion pieces to our top quality force gauges, providing complete
More informationTire 16 inch 225/75R inch 255/60R 18
417009 133 1. SPECIFICATIONS Description Specification Tire 16 inch 225/75R 16 Tire inflation pressure 18 inch 255/60R 18 Front: 32 psi Rear: 32 psi (44 psi: when the vehicle is fully laden with luggage)
More informationINDUSTRIAL TAPE PRODUCT GUIDE
INDUSTRIAL TAPE PRODUCT GUIDE POLYESTER FILM TAPES Ideal Tape s complete line of pressure-sensitive polyester film tapes are backed by more than 100 years of coating experience. These products are widely
More informationWhile modern hydraulic hoses may have varying pressure ratings, temperature ranges and stock materials, all have similar construction features.
Introduction While modern hydraulic hoses may have varying pressure ratings, temperature ranges and stock materials, all have similar construction features. A hose consists of three basic components: The
More informationSTANDARD TESTING FOR ELASTOMER (RUBBER) Part 1. General Rubber
STANDARD TESTING FOR ELASTOMER (RUBBER) Part 1. General Rubber By. Muhammad Akhsin Muflikhun The o ept ased fro the Book Basi Ru er Testi g: ele ti g Methods for a Ru er Test Progra, Editor: Joh. Di k,
More informationROBOTRAX System. Cable carrier for 3D movements. Subject to change.
System Cable carrier for 3D movements Trademarks are legally protected for the TSUBAKI KABELSCHLEPP GmbH as a national or international registration in the following countries: tsubaki-kabelschlepp.com/trademarks
More informationForce Measurement Testing Systems
Force Measurement Testing Systems The Better Solution Starrett Innovation. Helping You Make Your Products Better. Our new Starrett force measurement systems exemplify the craftsmanship and quality synonymous
More informationStatic Servohydraulic Universal Testing Machines
Materials Testing Systems 45 Static Servohydraulic Universal Testing Machines A B C D E F G H I J K L M N O P Q R S T 46 Materials Testing Systems Static Servohydraulic Universal Testing Machines for Load
More informationNZWTA TEXTILE TESTING Price List Valid from 01 July 2017
NZWTA TEXTILE TESTING Price List Valid from 01 July 2017 Carpet Tests Test Method Minimum Sample Size ACCS Full Test Package (6 tests) 1 x 1.5 m, 6 tiles $734.00 Castor Chair Test ISO TR 4918, BS DIN EN
More informationOn Site Gearbox inspections
On Site Gearbox inspections Although a comprehensive on-site gearbox inspection will be carried out by a trained Gearbox Technician. Inspection will be worked in to fit in with planned shutdown period
More informationprotect mask conduct reflect enhance 3M Specialty Tape Solutions
3M Specialty Tape Solutions protect enhance mask reflect conduct 1 quiet & more Meeting application challenges for appliances, aerospace, automotive, construction, MRO, electronics, commercial transport,
More informationDISTRIBUTOR PRICE LIST
DISTRIBUTOR PRICE LIST 2009 SAWYER MFG. COMPANY Sawyer products are sold exclusively through distributors in the U.S. and abroad. Please contact us for the name of your nearest distributor. STANDARDS OF
More informationSecond Correlating Revision No. 3 NFPA [ Section No ]
Second Correlating Revision No. 3 NFPA 1991 2015 [ Section No. 2.3.2 ] 2.3.2 ASTM Publications. American Society for Testing and Materials, 100 Barr Harbor Drive, West Conshohocken, PA 19428 2959. ASTM
More informationPLASTI-GRIP* Terminals and Splices
PLASTI-GRIP* s and Splices Application Specification 114-2161 29 MAR 16 Rev G All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters [and inches].
More informationSuperpave Asphalt Binders
Superpave Asphalt Binders Aging and what they mean to the specification John D Angelo D Angelo Consulting, LLC johndangelo@dangeloconsultingllc.com Stiffness (Response to Load) elastic viscous elastic
More informationMain bearing T 18-1/5. No. Name of article Check item 1 Jack bolt Check upper &lower face for damage 2 Column center piece
Main bearing 1132 1. Structure Pin for fall prevention Fit plug after work is over No. Name of article Check item 1 Jack bolt Check upper &lower face for damage 2 Column center piece 3 Bearing cover Check
More informationSTA ST TIC SOLUTIONS ATIC SOLUTIONS
STATIC SOLUTIONS Contents GASOLINE ENGINE TOOLS HAND TOOLS BITS & SOCKETS ELECTRIC TOOLS AIR TOOLS TECHNICAL HAND TOOLS BITS & SOCKETS ELECTRIC TOOLS AIR TOOLS GASOLINE ENGINE TOOLS ELECTRIC TOOLS BITS
More informationTest-A-Pack Seal Strength Tester F The most important thing we build is trust. Testing Range. Key Features. Ordering Information
Test-A-Pack 2600 Seal Strength Tester P/N: F100-2600-3 The most important thing we build is trust The Cobham Test-A-Pack Model F100-2600-3 Seal Strength Tester is the heart of the world s most advanced
More informationThe document describes the product specification of the LiFePO4 polymer lithium-ion rechargeable battery cell supplied by Tenergy Corporation.
Product Name: LiFePO4 polymer lithium-ion rechargeable battery cell Product Number: 30208 Description: Battery Chemistry: 3.2V 15Ah LiFePO4 The document describes the product specification of the LiFePO4
More informationDEFOGGER SYSTEM PARTS LOCATION
BE61 PARTS LOCATION TROUBLESHOOTING The table below will be useful for you in troubleshooting these electrical problems. The most likely causes of the malfunction are shown in the order of their probability.
More informationGeoscience Testing laboratory (Al Ain)
Soil 1 In-situ Density by Sand Replacement Method Using Large Pouring Cylinder & Small Pouring Cylinder In-place Density Test by Sand Cone Method BS 1 Part ASTM D 1556 Dry Density Moisture Content Relationship
More information