HOSE - OIL/CHEMICAL & GENERAL PURPOSE

Size: px

Start display at page:

Download "HOSE - OIL/CHEMICAL & GENERAL PURPOSE"

George Neal
5 years ago
Views:

1 HOSE - OIL/CHEMICAL & ENERAL PURPOSE A430 - Oil Suction and Delivery Hose 10 bar Rubber: Lining: Reinforcement: Cover: Temperature range: - DB15 Designed for suction and discharge use on various petroleum products with up to 50% aromatic content. Also suited to hydraulic oil return lines and wet diesel exhaust 10 bar (150 psi), safety factor 3:1. Vacuum 0.93 bar. Black NBR for 50% aromatics High strength textile yarn, high tensile carbon steel helix and copper anti-static wire Black CR oil, ozone and weather resistant Red tape DIXON logo A430 OIL S&D 10BAR vac 0.93 bar SF 3:1 DATE OF MANUFACTURE DIXON ASSEMBLY W.P. -20 C to +70 C A430 BLACK OIL HOSE PART NO. DIMENSIONS PRESSURE (bar) WEIHT BEND RADIUS COIL (mm) POSITIVE NEATIVE (Kg/m) (mm) LENTH ID OD WORKIN BURST (min) (approximate) (approximate) (metre) A A A A A A A

HOSE - OIL/CHEMICAL & ENERAL PURPOSE A104 - Red Multi-Purpose Non-Conductive Hose Rubber: Lining: Reinforcement: Cover: Temperature range: DB18 Multi-purpose hose suitable for use in steel works,

2 HOSE - OIL/CHEMICAL & ENERAL PURPOSE A104 - Red Multi-Purpose Non-Conductive Hose Rubber: Lining: Reinforcement: Cover: Temperature range: DB18 Multi-purpose hose suitable for use in steel works, foundries, auto plants, general engineering and construction for conveying and decanting a broad range of oils, greases and solvents (OS). For compatability of solvents please refer to Dixon 20 bar (300 psi) to 14 bar (200 psi) dependant on bore size, safety factor 4:1 Black NBR High strength textile yarn Red nitrile blend, oil, solvent, abrasion and ozone resistant WHITE INK JET DIXON A104 NON CONDUCTIVE MULTIPURPOSE 300 psi WP SF 4:1 DIXON ASSEMBLY W.P. in bore sizes 6mm to 25mm inclusive. For bore sizes 32mm & 38mm, WP print 250 psi and for 51mm WP print 200 psi -20 C to +100 C A104 RED MULTI-PURPOSE HOSE PART NO. DIMENSIONS (mm) PRESSURE (bar) WEIHT (Kg/m) BEND RADIUS (mm) COIL LENTH ID OD WORKIN BURST (min) (approximate) (approximate) (metre) A A A A A A A A A A

HOSE - OIL/CHEMICAL & ENERAL PURPOSE Dixon Oil Blue Spiral PVC Suction and Delivery Hose PVC: DA12 Suitable for light suction and delivery whether used in applications on plant or tankers of various

3 HOSE - OIL/CHEMICAL & ENERAL PURPOSE Dixon Oil Blue Spiral PVC Suction and Delivery Hose PVC: DA12 Suitable for light suction and delivery whether used in applications on plant or tankers of various grades of petroleum, lubricating oils, petroleum derivatives and various chemicals Working Pressure: 8 bar (116 psi) to 5 bar (72 psi) dependant on bore 20 C. Safety factor 3:1. Vacuum 0.78 bar Construction: Soft nitrided blue pvc with embedded shock resistant semi-rigid white pvc spiral helix. Smooth bore DIXON OIL HOSE (BORE) DIXON ASSEMBLY W.P. Temperature range: -20 C to + 60 C BLUE OIL SPIRAL PVC HOSE PART NO. DIMENSIONS PRESSURE 20 C WEIHT BEND RADIUS COIL (mm) POSITIVE NEATIVE (Kg/m) (mm) LENTH ID OD WORKIN BURST (min) (approximate) (approximate) (metre) AUS025BHD AUS032BHD AUS038BHD AUS050BHD AUS065BHD AUS080BHD

HOSE - OIL/CHEMICAL & ENERAL PURPOSE A900 (/A) - Composite Oil Hose 10 bar Composite: BB06 This anti-static composite hose is designed for suction and discharge use on plant or road/rail tankers with

4 HOSE - OIL/CHEMICAL & ENERAL PURPOSE A900 (/A) - Composite Oil Hose 10 bar Composite: BB06 This anti-static composite hose is designed for suction and discharge use on plant or road/rail tankers with a wide range of hydrocarbons where 100% aromatic resistance is required. The hose construction is exceptionally lightweight and flexible for ease of handling yet remains robust, hard-wearing and cost effective Hose construction: Electrically resistant to less than 10 ohms, as required by BS 5842 : 1980 clause 6.2. Hose and assembling in accordance with EN : bar (150 psi), safety factor 4:1. Vacuum 0.90 bar Polypropylene and Polyethylene films and fabrics with black weather-proof and abrasion resistant outer cover wrapped and tensioned between internal and external wire spirals. Inner and external wire spiral, galvanised steel (). A900A (A=ALUMINIUM INTERNAL WIRE, = ALVANISED STEEL EXTERNAL WIRE) White spiral tape DIXON logo A900 OIL TYPE 2 EN 13765: BAR 80 C PP Temperature range: -40 C to + 80 C A900 COMPOSITE OIL HOSE - BLACK COVER NOMINAL PRESSURE (bar) WEIHT BEND RADIUS COIL BORE POSITIVE NEATIVE (Kg/m) (mm) LENTH LENTH WORKIN BURST (min) (approximate) (approximate) (metre) A900A LIHTWEIHT VAPOUR RECOVERY HOSE - ORANE COVER NOMINAL PRESSURE (bar) WEIHT BEND RADIUS COIL BORE POSITIVE NEATIVE (Kg/m) (mm) LENTH LENTH WORKIN BURST (min) (approximate) (approximate) (metre) ASSEMBLIES MANUFACTURED TO ORDER 124

HOSE - OIL/CHEMICAL & ENERAL PURPOSE A905 (P/PS) - Composite Chemical Hose 10 bar Composite: BB06 This anti-static composite hose is designed for suction and discharge use on plant or road/rail

5 HOSE - OIL/CHEMICAL & ENERAL PURPOSE A905 (P/PS) - Composite Chemical Hose 10 bar Composite: BB06 This anti-static composite hose is designed for suction and discharge use on plant or road/rail tankers with a wide range of chemicals. The hose construction is exceptionally lightweight and flexible for ease of handling yet remains robust, hard-wearing and cost effective Hose construction: Electrically resistant to less than 10 ohms, as required by BS 5842 : 1980 clause 6.2. Hose and assembling in accordance with EN : bar (150 psi), safety factor 4:1. Vacuum 0.90 bar Polypropylene and Polyethylene films and fabrics with REY weather-proof and abrasion resistant outer cover wrapped and tensioned between internal and external wire spirals. Inner wire spiral, polypropylene coated mild steel (P), external wire spiral, galvanised mild steel (). OTHER WIRE COMBINATIONS AVAILABLE A905PS (P = POLYPROPYLENE-COATED MILD STEEL INNER WIRE, S = STAINLESS STEEL OUTER WIRE) WITH REEN MARKER STRIPE White spiral tape DIXON logo A905 CHEMICAL TYPE 2 EN 13765: BAR 80 C PP Temperature range: -40 C to + 80 C NOMINAL PRESSURE (bar) WEIHT BEND RADIUS COIL BORE POSITIVE NEATIVE (Kg/m) (mm) LENTH LENTH WORKIN BURST (min) (approximate) (approximate) (metre) ASSEMBLIES MANUFACTURED TO ORDER A900P/PS COMPOSITE CHEMICAL HOSE 125

HOSE - OIL/CHEMICAL & ENERAL PURPOSE A910 (S/SS) - Composite PTFE Chemical Hose 10 bar Composite: Hose construction: BB06 This anti-static PTFE lined composite hose is designed for suction and

6 HOSE - OIL/CHEMICAL & ENERAL PURPOSE A910 (S/SS) - Composite PTFE Chemical Hose 10 bar Composite: Hose construction: BB06 This anti-static PTFE lined composite hose is designed for suction and discharge use on plant or road/rail tankers with a wide range of aggressive chemicals. The hose construction is exceptionally lightweight and flexible for ease of handling yet remains robust, hard-wearing and cost effective Electrically resistant to less than 10 ohms, as required by BS 5842 : 1980 clause 6.2. Hose and assembling in accordance with EN : bar (150 psi), safety factor 4:1. Vacuum 0.90 bar PTFE lined with Polypropylene and Polyethylene films and fabrics with RED weather-proof and abrasion resistant outer cover wrapped and tensioned between internal and external wire spirals. Inner wire spiral stainless steel (S), external wire spiral, galvanised mild steel (). OTHER WIRE COMBINATIONS AVAILABLE A910SS (S = STAINLESS STEEL INNER AND OUTER WIRES) WITH REEN MARKER STRIPE White spiral tape DIXON logo A910 PTFE TYPE 2 EN 13765: BAR 100 C PTFE Temperature range: -40 C to C A910 S/SS COMPOSITE PTFE CHEMICAL HOSE NOMINAL PRESSURE (bar) WEIHT BEND RADIUS COIL BORE POSITIVE NEATIVE (Kg/m) (mm) LENTH LENTH WORKIN BURST (min) (approximate) (approximate) (metre) ASSEMBLIES MANUFACTURED TO ORDER 126

HOSE - OIL/CHEMICAL & ENERAL PURPOSE A410 - UHMWPE Chemical Suction and Delivery Hose 10 bar Rubber: Lining: Reinforcement: Cover: Temperature range: DB12 Designed for suction and discharge use on a

7 HOSE - OIL/CHEMICAL & ENERAL PURPOSE A410 - UHMWPE Chemical Suction and Delivery Hose 10 bar Rubber: Lining: Reinforcement: Cover: Temperature range: DB12 Designed for suction and discharge use on a wide range of chemicals and acids on plant or road/rail tanker 10 bar (150 psi), safety factor 4:1. Vacuum 0.93 bar Ultra high molecular weight polyethylene (UHMWPE) High strength textile yarn, high tensile carbon steel helix and copper anti-static wire Blue EPDM chemical ozone and weather resistant White tape DIXON logo A410 CHEMICAL S&D UHMWPE 10BAR vac 0.93 bar SF 4:1 DATE OF MANUFACTURE DIXON ASSEMBLY W.P. -20 C to +70 C A410 BLUE UHMWPE CHEMICAL HOSE PART NO. DIMENSIONS PRESSURE (bar) WEIHT BEND RADIUS COIL (mm) POSITIVE NEATIVE (Kg/m) (mm) LENTH ID OD WORKIN BURST (min) (approximate) (approximate) (metre) A A A A A A A A

Hose - Oil, Chemical & General Purpose

Hose - Oil, Chemical & General Purpose A430 - Oil Suction and Delivery Hose 10 bar Designed for suction and discharge use on various petroleum products with upto 50% aromatic content, whether in plant or on tankers. Is suitable for handling