DILLARD'S INC TEST PROTOCOL FOR DILL USA- (V22) HANDBAG (CHILDREN)

Transcription

1 By/Date: Page 1 of 6 SCOPE: This protocol is applicable for testing of handbag for children. SUPPLEENTAY POTOCOL Note: Additional cost, sample size and TAT may be required if testing to 1 or more supplemental protocol is necessary. Please refer to the below referenced supplemental protocol(s) for additional information. A California Proposition 65 DILL-AN-PTCL USA - The sample should be reviewed against the requirements of California Proposition 65. LABELING US Packaging labeling Labeling review: country of origin Use labeling Labeling review: leather Claim verification - level 1 Producer's markings Small parts warning F.P. and L. Act (16 CF 500) O NIST Uniform Laws and egulations Handbook CF 300/303, 19 CF CPSD-GB Packaging shall be labelled with the following, Product Identification Net quantity of contents shall be expressed in terms of weight or mass, measure, numerical count, or combination so as to give accurate information to facilitate consumer comparison (U.S. and metric units) anufacturer, packer, or distributor s name & address (City, State & Zip Code) 1 Shall indicate country of origin legibly, permanently, and in comparable size and close proximity to any mention of country other than country in which the article was manufactured or produced. ust be visible at point of purchase. 1 Use/care instructions shall be clear, concise and understandable, provide stepby-step method of use and be provided in language appropriate to destination countries. Provide a copy of the instructions in the report. 16 CF 24 [Leather labeling] AST F Sec (od) ust comply with FTC leather labeling guidelines. ust comply to claims. [Only if applicable] eport actual. Shall comply with requirement. 1 [Only if applicable] ANALYTICAL A Total lead in surface coating CPSD-GB AST F Sec. 7 (od) CPSC-CH-E / CPSD-AN- CHOKING HAZAD - Small parts. Not for children under 3 yrs. - accessible surface coatings in the as received state on items outside of the scope of 16 CF 1303 shall not contain lead or lead components in which the

2 By/Date: Page 2 of lead content is in excess of 0.009% (90 ppm) of the weight of the total content. eport actual results or include data table within report. Component testing is allowed. Compositing up to 3 colors is allowed. Client requirement PHYSICAL ECHANICAL AND ELECTICAL HAZAD Sharp point and 16 CF Shall have no sharp points/edges, other than those required for function. sharp edge & 49 Use and abuse 16 CF No hazards. (small parts, sharp edges, points) & 49 / AST F Sec. 4.7 & 4.9 (od) Projections AST F Shall be free from projections. Sec. 4.8 (od) Plastic film AST F Sec (od) Torque test for removal of components Tension test for removal of AST F Sec. 8.8 (od) AST F Sec. 8.9 (od) components Drop test AST F Sec (od) Compression test AST F Sec (od) FLAABILITY Solids - 16 CF Flammability (c)(6)(vi) / 16 CF PHYSICAL CHAACTEISTICS Dimensions CPSD-GB Dimensions - depth CPSD-GB [Packaging - film] Shall not be less than mm. 1 [As per table 5] Shall meet all requirement, no hazards. 1 [As per table 5] Shall meet all requirement, no hazards. 1 [As Per Table 5] Shall meet all requirements, No hazards 1 [As Per Table 5] Shall meet all requirements, No hazards 1 Shall meet requirements < 0.1 inch per second horizontal burning. 1 eport overall dimensions; shall meet label claims (If applicable) (-0% / +5%). 1 eport overall depth; shall meet label claims.

3 By/Date: Page 3 of 6 Dimensions CPSD-GB [Handle drop] eport overall dimensions; shall meet label claims. Dimensions CPSD-GB [Shoulder strap drop circumference] eport maximum and minimum dimensions; shall meet label claims. Other features CPSD-GB Shall be as claimed. Fabric weight AST D a 1 ± 3% as claimed 2013 Dimensions - thickness CPSD-GB [aterial qualities] eport overall thickness; shall meet label claims. (If applicable) (-0% / +5%). Number of main CPSD-GB Shall be as claimed. compartments Number of CPSD-GB Shall be as claimed. internal pouches or pockets or openings Number of CPSD-GB Shall be as claimed. external pouches or pockets or openings Yarn construction AST D Shall be as claimed (± 3.0%). (2011) Fabric count of woven fabric AST D Shall be as claimed (± 3.0%). WOKANSHIP Fabric defects AST D (2016) Defects and workmanship PEFOANCE Actual use - functionality CPSD-GB CPSD-GB No critical / major defects. Shall have no discernible surface degradation, including crazing, shivering, denting, bubbles, cracks, stains, deformations, chips, fractures, heavy lines, waves, shear marks, scratches, scuff marks, indentations, or blisters. Shall have no components missing, malformed, and/or fractured. Shall function as intended. eport details of evaluation (materials used / features tested / consumables / method / etc.)

4 By/Date: Page 4 of 6 Breaking strength AST D of textile fabrics: 2013 grab test Tearing strength: Elmendorf apparatus Tearing strength: Elmendorf apparatus AST D e1 AST D e1 Seam strength AST D e1 (od) Handle 45 degree Operability of zippers Strength tests for zippers Abrasion resistance of fabric: rotary platform, doublehead method AST D e1 (od) AST D AST D AST D A oisture content CPSD-HL A Drop test CPSD-HL (od) 2 Shell: minimum 25 lbf Lining: minimum 20 lbf Note: Pass / fail base on result of overall fabric break. 2 Shell: 2.0 lb minimum. 2 Lining: 1.5 lb minimum. 2 Side seam: 25 lb minimum. Zipper seam: 25 lb minimum. Bottom seam: 25 lb minimum. Lining woven: 20 lb minimum. Vinyl woven: 10 lb minimum. odification: Expanded the scope to other than apparel. 2 Clutch: 10 lb minimum. Large: 20 lb minimum. edium: 15 lb minimum. ini: 5.0 lb minimum. odification = Expanded scope to other products. 1 Open and close: 2.0 lb maximum. 1 Cross widthwise strength: 15 lb minimum. Scoop pull: 10 lb minmum. Top stop: 10 lb minimum. Bottom stop: 10 lb minimum. Slider pull: 5 lb minimum. Slider torque: 2 lb minimum. 1 Abradent: CS17, Head weight, 1000g, 500 cycles eq.: Loss in breaking: 10% of original break load. 1 [Wood components] Less than 12%. 1 [Wood components] odification = One 12 in. drop - remain intact.

5 By/Date: Page 5 of 6 Effects of extreme CPSD-HL temperature change Water repellency: spray test esistance to corrosion COLOFASTNESS Colorfastness to crocking Colorfastness to rotary crocking 1 Shall withstand for 24 hours at 32 F and then 24 hours at 120 F with no structural failure or visual change. odification: Exposure time changed from 4 hours to 24 hours. AATCC [If claimed] inimum 90 ISO rating. AST B (mod) / CPSD-HL [Applicable to samples or sample components constructed of metal or samples with metallic coatings that can be exposed to the environment] Shall withstand 24 hours in 1% salt spray (fog) with no noticeable oxidation / corrosion / visual changes. odification: 1% salt spray (fog). AATCC [Face / Back / Edge] General: Dry: Grade 4.0 minimum Wet: Grade 3.0 minimum Dark Color: Dry: Grade 3.0 minimum Wet: Grade 2.0 minimum AATCC [Face / Back / Edge] General: Dry: Grade 4.0 minimum Wet: Grade 3.0 minimum Dark Color: Dry: Grade 3.0 minimum Wet: Grade 2.0 minimum No. Of equired for Complete Testing No. Of (Fully Packed) Cartons For Transit Testing: No. Of Working Days For Complete Testing: 2 1 Only Upon Dillard s equest 5 Client Approval: Creation Date: Last evision Date: Pricing eview Date Lucy Feng 04/Apr/ /Apr/ /ar/2018

6 By/Date: Page 6 of 6 Technical eview Date: Key A Additional Charge For This Test andatory egulatory esult Key C N NA NT Claimed ecorded eets Does Not eet Not Applicable Not Tested ating Key PASS FAIL N Pass Fail Not equested