DILLARD S TEST PROTOCOL FOR DILR US PACKAGED PRODUCT TRANSIT TESTING ISTA (FLAT CONFIGURATION; 150 LBS. OR LESS) (V8)

Transcription

1 Test Date: Reviewed By/Date: OVER PACKAGING Labeling DILLARD S TEST PROTOCOL FOR 1 Label identifying an "Over-packaged product for drop / vibration testing"; Report if present. Over - packaged Inspection PACKAGED PRODUCT Labeling Inspection Hazards PHYSICAL CHARACTERISTICS Length Width Height Weight 1 Product and package should be over-packaged. If the sample is not over-packaged, the following result may not be representative of standard condition. 1 No major defects / no breaks in or crushing of the overpackaging 1 Label identifying A "Packaged Product For Drop / Vibration Testing" 1 No major defects / no breaks in or crushing of the Packaging The packaged product should not be opened prior to testing unless there is a sign of damage such as rattling. In this case, the package can be opened and the item inspected for damage. Damaged product will not be tested. Inner packaging must not be disturbed in a manner to compromise test results after resealing the package. 1 Staples are not permitted in the construction of the carton except along the bottom or along the manufacturer s edge only. Steel strapping is not permitted. Plastic strapping is permitted but the securing device / method (i.e. Buckle) must not contain or create a sharp point or edge. 1 Report overall length; shall meet label claims 1 Report overall width; shall meet label claims 1 Report overall height; shall meet label claims 1 Report overall weight; shall meet label claims Page 1 of 6

2 Material Qualities: Material description Material face color Thickness TEST PROCEDURES Shock drop 2016) Sequence 3 / 1 Report materials: shall meet label claims (If applicable) 1 Report colors: shall meet label claims (If applicable) 1 Report overall thickness; shall meet label claims. 9 drops follow sequence below; Drop number < 70 lb (32 kg) > 70 lb (32 kg) and < Orientati on of drop 150 lb (70 kg) 1 18 in (460 mm) 12 in (300 mm) Edge in (460 mm) 12 in (300 mm) Edge in (460 mm) 12 in (300 mm) Edge in (460 mm) 12 in (300 mm) Corner in (460 mm) 12 in (300 mm) Corner in (460 mm) 12 in (300 mm) Edge in (460 mm) 12 in (300 mm) Edge in (910 mm) 24 in (600 mm) Face in (460 mm) 12 in (300 mm) Face 3 bottom for Pass/Fail Criteria Page 2 of 6

3 Vibration - random with top load 2016) Sequence 4 / Vibration - random without top load 2016) Sequence 4 / Sample with top load shall be subjected to random vibration test in the following sequence 1. Face 3 on vibration system platform for 60 minutes. 2. Face 4 on vibration system platform for 30 minutes. 3. Face 6 on vibration system platform for 30 minutes. Test sample for 30 minutes without top load and with face 3 on vibration system platform. bottom for Pass/Fail Criteria Page 3 of 6

4 Shock drop 2016) Sequence 6 / Shock - rotational edge drop 2016) Sequence 7 / 8 drops follow sequence below; Drop numb er Drop Height < 70 lb (32 kg) Drop Height For > 70 lb (32 kg) and < 150 lb Orientation of drop (70 kg) 1 18 in (460 mm) 12 in (300 mm) Edge in (460 mm) 12 in (300 mm) Edge in (460 mm) 12 in (300 mm) Edge in (460 mm) 12 in (300 mm) Corner in (460 mm) 12 in (300 mm) Corner in (460 mm) 12 in (300 mm) Corner in (910 mm) 24 in (600 mm) Most critical or damage prone flat orientation 8 18 in (460 mm) 12 in (300 mm) Face 2 on hazard Record choice and rational of most critical orientation With one edge of face 3 placed on support, drop opposite edge from a height of 8 inches (200 mm). Test in sequence; 1. Longest edge 2. Next longest edge radiating 90º from edge tested in Opposite edge of edge tested in 2. Page 4 of 6

5 Shock - full rotational flat drop 2016) Sequence 8 / Shock concentrated impact WHEN APPLICABLE *Impact alternative for skid bottom packages or those weighing 500 lb or more *Impact - bridge - when L is 3x W or D *Impact - rupture - bags and cylindrical containers * Inspection of electrical samples after testing *Bursting strength - applicable to corrugated board *Sutherland rub test - applicable to printed shipping carton which is also the shelf carton 2016) Sequence 9 / Place sample so that smallest face rests on test surface. When pushed over, face 3 shall impact test surface. Repeat with next largest face but ensure, face 3 impacts the test surface Drop hazard box from 16 inches (400 mm) onto midpoint of longest and shortest dimensions of face 1. bottom for Pass/Fail Criteria ASTM D No major damage after impacting the 4 vertical faces and completing two 8" flat rotational drops to the bottom surface ASTM D (R2016) 1 No major defects after impact ASTM D5276 (R2004) 1 No major defects after drop onto rapture hazard as determined in standard 1 No damage to electrical components. Must function as intended TAPPI T810 om-1117 modified ASTM D (R2011) modified Key: * Additional Charge For This Test ** Mandatory Requirement 10 Identify number of walls. Report the average bursting strength (lb/in.²) of 10 bursts. Modification = Condition 21 ± 1 C (70 ± 2 F) and 65 ± 2% RH 1 Shall not have any defects after 25 cycles using 2 lbs. weight. Modification = Conditioning requirements not met. Results Key: Rating Key: Page 5 of 6

6 M Meets NM Does Not Meet Good Good NA Not Applicable NT Not Tested Fail Fail C Claimed R Recorded No. Of Required For Complete Testing: 2 No. Of (Fully Packed) Cartons For Transit Testing: 1 (Only Upon Dillard s Request) Creation Date: JANUARY 10, 2006 No. Of Working Days For Complete Testing: 7 Editorial Revision Date: FEBRUARY 09, 2018 Pricing Review Date: MARCH 22, 2006 Technical Review Date: Page 6 of 6