COMFORT PRODUCT INC. Technical Report: (1215) Initial Report Date: August 03, 2015 Date Received: July 31, 2015 Page 1 of 22

Size: px
Start display at page:

Download "COMFORT PRODUCT INC. Technical Report: (1215) Initial Report Date: August 03, 2015 Date Received: July 31, 2015 Page 1 of 22"

Transcription

1 CONSUER PRODUCTS SERVICES DIVISION COFORT PRODUCT INC Date Received: July 31, 2015 Page 1 of 22 S.TAN LOT 222, LORONG 4D, SUBANG NEW VILLAGE, SHAH ALA, SELANGOR, ALAYSIA. Sample Description: 2 DRAWER WRITING DESK anufacturer: PANELBASE SYSTE PO No.: / INDUSTRIES SDN BHD Buyer: COFORT PRODUCT INC Style: Country of Origin: ALAYSIA Country of Destination: USA Color: / SKU No.: / Test Protocol: PACKAGED PRODUCT TRANSIT UPC Code: / TESTING ISTA 3A (150 LBS OR LESS) - ODIFIED Previous Report No.: / Item No: / EXECUTIVE SUARY: The sample(s) EET the following requirement(s): - Packaged Product Transit Testing ISTA 3A (150 lbs. or less) - odified. BUREAU VERITAS CPS SDN BHD Technical Inquiries: Koo Chieh Voon Tel: ext chiehvoon.koo@sg.bureauveritas.com PREPARED BY: APPROVED BY: AZAHAR TESTING TECHNICIAN KOO CHIEH VOON HARDLINE ASSISTANT ANAGER Bureau Veritas CPS Sdn Bhd Setia Business Park No. 7, Jalan Laman Setia 7/3, Taman Laman Setia, Gelang Patah, Johor, alaysia Tel: (6) Fax: (6) Co.Reg.No: U CustomerEnq.bvcpsYHL@sg.bureauveritas.com Website: This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at Bureauveritas.com/cps and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents.

2 Page 2 of 22 DESCRIPTION OF PACKAGE: 1. A full overlap double wall corrugated board master carton is secured by 48mm wide clear plastic tape at all the opening. (See Exhibits 1-4) 2. Part C is placed at top face inside the master carton. (See Exhibits 4 & 5) 3. Each two pieces of Part H, Part I and a piece of Part J and Part E are placed side by side at rear of the master carton further protected by two EPS boards (left: 1 1 / 8 x 10 1 / 8 x 5 / 8 ; rear: 5 5 / 8 x 2 1 / 8 x 5 / 8 ). (See Exhibits 5 & 6) 4. Each two pieces Part G and a piece Part J are placed side by side at front of the master carton further protected by two EPS boards (9 5 / 8 x 2 1 / 2 x 5 / 8 & 9 5 / 8 x 1 1 / 2 x 5 / 8 ). (See Exhibits 5 & 6) 5. Part D and Part K are placed front and rear, Part F is placed left rear side of the master carton further protected by three EPS boards (left front & rear: 1 1 / 2 x 6 1 / 2 x 5 / 8 & 7 / 8 x 6 1 / 2 x 5 / 8 ; rear: 31 1 / 2 x 4 1 / 4 x 5 / 8 ). (See Exhibits 6 & 7) 6. A 0.07mm thick hardware pack is placed at the front left side of the parts mentioned in point 5. (See Exhibits 7 & 8) 7. Two pieces of Part Z are placed side by side, further stacked together with Part A and Part B. (See Exhibits 9 & 10) 8. Eight pieces of the Drawer Slider are wrapped by a 0.22mm thick paper sheet and placed at the left side of the parts mentioned in point 7. (See Exhibits 9 & 10) 9. All item mentioned in point 6, 7 and point 8 are protected by five EPS boards (left: 5 / 8 x 17 x 1, 3 7 / 8 x 17 1 / 4 x 1 3 / 8 & 1 7 / 8 x 4 1 / 2 x 1 1 / 4 ; rear: 7 x 1 7 / 8 x 1 1 / 4 & 28 1 / 2 x 3 1 / 2 x 1 1 / 8 ). (See Exhibits 9 & 10) 10. The Assembly Instruction is placed at the bottom face of the master carton. (See Exhibits 11) 11. The surrounding faces of the master carton are protected by four EPS boards (front & rear: 35 1 / 4 x 1 / 2 x 3 ; left & right: 1 / 2 x 20 x 3 ). (See Exhibit 12) TEST RESULT(S): Package Dimension : 38 1 / 4 x 20 3 / 4 x 3 1 / 2 Gross Weight : 46.1 lbs. First Drop Test : Number Of Drops: 9 : Height Of Drops: 18 / 36 Vibration Test Time : 900 seconds at 240 cpm. 900 seconds at 219 cpm. 900 seconds at 182 cpm. Number Of Impacts : 9,615 Second Drop Test : Number Of Drops: 8 : Height Of Drops: 18 / 36 Rotational Edge Drop : Number Of Drops: 3 Height Of Drops: 8 Full Rotational Flat Drop : Number Of Drops: 2 Concentrated Impact : Number Of Drops: 1 Height Of Drops: 16

3 PACKAGED PRODUCT TRANSIT TESTING ISTA 3A (150 LBS OR LESS) - ODIFIED Page 3 of 22 Evaluation Citation/ethod No. SCOPE: This transit test protocol intends to test individual packaged-products, and simulates shipping through a parcel delivery system by a series of drop and random vibration tests. Four types of packages, namely Standard, Small, Flat and Elongated, are covered by this protocol with reference to H-9012 / ISTA 3A. OVER PACKAGING Labeling Over-packaged CPSD-HL THD / Visual CPSD-HL THD / Visual Inspection CPSD-HL THD / Visual PACKAGED PRODUCT Of Test Package Labeling Inspection Hazards PHYSICAL CHARACTERISTICS Length 1 Label identifying an "Over-packaged product for drop / vibration testing"; Report if present 1 Product and package shall be over-packaged If the sample is not over-packaged, the following result may not be representative of standard conditions 1 No major defects / No breaks in or crushing of the overpackaging CPSD-HL THD / Visual CPSD-HL THD / Visual CPSD-HL THD / Visual CPSD-HL THD / Standard measure 1 Label identifying a "Packaged product for drop / vibration testing" 1 No major defects / no breaks in or crushing of the Packaging The packaged product shall not be opened prior to testing unless there is a sign of damage such as rattling. In this case, the package can be opened and the item inspected for damage. Damaged product will not be tested. Inner packaging must not be disturbed in a manner to compromise test results after resealing the package. 1 Staples are not permitted in the construction of the carton except along the bottom or along the manufacturer s edge only. Steel strapping is not permitted. Plastic strapping is permitted but the securing device / method (i.e. Buckle) must not contain or create a sharp point or edge. 1 Report overall length; shall meet label claims (If applicable) No Label - No Label - C: - R: 38 1 / 4 -

4 PACKAGED PRODUCT TRANSIT TESTING ISTA 3A (150 LBS OR LESS) - ODIFIED Page 4 of 22 Width Evaluation Citation/ethod No. CPSD-HL Report overall width; shall meet label claims THD / Standard (If applicable) C: - measure R: 20 3 / 4 - Height Weight aterial Qualities: CPSD-HL THD / Standard measure CPSD-HL THD / Standard measure 1 Report overall height; shall meet label claims (If applicable) 1 Report overall weight; shall meet label claims (If applicable) C: - R: 3 1 / 2 C: - R: 46.1 lbs. - - aterial Description aterial Face Color Thickness PERFORANCE *Function of electrical/electronic samples after testing TEST PROCEDURES *Atmospheric preconditioning CPSD-HL THD / Visual CPSD-HL THD / Visual CPSD-HL THD / Standard measure CPSD-HL THD / Actual ues 1 Report materials: shall meet label claims (If applicable) 1 Report color: shall meet label claims (If applicable) 1 Report overall thickness; shall meet label claims (If applicable) 1 No damage to electrical / electronic components. ust function as intended (ex. Insert batteries, switch to ON, plug in sample, switch to ON.) Shipments 70kg (150 lb) or Less (standard, small, flat or elongated)] 12 hours preconditioning at ambient laboratory conditions of 20-40ºC and 10-80% RH, Record the ambient laboratory temperature and humidity prior to and after conditioning. C: - R: Double Wall Corrugated Board C: - R: Brown C: - R: NA - Temperature: 24.4 C Humidity: 41.8% RH - - -

5 Evaluation Citation/ethod No. *Atmospheric conditioning 2012 Sequence 1 / CPSD-HL THD PACKAGED PRODUCT TRANSIT TESTING ISTA 3A (150 LBS OR LESS) - ODIFIED Shipments 70kg (150 lb) or Less (standard, small, flat or elongated)] Page 5 of 22 Refer to client s requirement and atmospheric condition table in ISTA 3A. If not specified, condition 100 F (38 C) and 85% RH for 72 hours

6 Evaluation Citation/ethod No. STANDARD PACKAGED-PRODUCT TEST Shock drop PACKAGED PRODUCT TRANSIT TESTING ISTA 3A (150 LBS OR LESS) - ODIFIED Shipments 70kg (150 lb) or Less (STANDARD)] Page 6 of 22 9 drops follow sequence below; Drop number < 70 lb (32 kg) > 70 lb (32 kg) and < 150 lb (70 kg) 1 18 in ( in (300 mm) mm) 2 18 in ( in (300 mm) mm) 3 18 in ( in (300 mm) mm) 4 18 in ( in (300 mm) mm) 5 18 in ( in (300 mm) mm) 6 18 in ( in (300 mm) mm) 7 18 in ( in (300 mm) mm) 8 36 in ( in (600 mm) mm) 9 18 in ( in (300 Orientation of drop Edge 3-4 Edge 3-6 Edge 4-6 Corner Corner Edge 2-3 Edge 1-2 Face 3 Face 3 mm) mm) NA -

7 PACKAGED PRODUCT TRANSIT TESTING ISTA 3A (150 LBS OR LESS) - ODIFIED Page 7 of 22 Evaluation Citation/ethod No. [STANDARD PACKAGED-PRODUCT TEST] [Vibration] Fixed displacement without dynamic top-load 3 axis (Base/Panel 3, Side/Panel 2 or 4 & Back Down/ Panel 5 or 6) - 15 minutes each axis. odification: 15 minutes each axis, no Dynamic Top-Load, no Over-the-Road random vibration spectrum, no Pick-Up and Delivery Vehicle spectrum, no Air spectrum and no Vacuum NA -

8 PACKAGED PRODUCT TRANSIT TESTING ISTA 3A (150 LBS OR LESS) - ODIFIED Page 8 of 22 Evaluation Citation/ethod No. Shock drop Shipments 70kg (150 lb) or Less (STANDARD)] 8 drops follow sequence below; Drop numb er Drop Height < 70 lb (32 kg) Drop Height For > 70 lb (32 kg) and < 150 lb Orientatio n of drop (70 kg) 1 18 in (460 mm) 12 in (300 mm) Edge in (460 mm) 12 in (300 mm) Edge in (460 mm) 12 in (300 mm) Edge in (460 mm) 12 in (300 mm) Corner in (460 mm) 12 in (300 mm) Corner in (460 mm) 12 in (300 mm) Corner in (910 mm) 24 in (600 mm) ost critical or damage prone flat orientation 8 18 in (460 mm) 12 in (300 mm) Face 3 on hazard Record choice and rational of most critical orientation NA -

9 Evaluation Citation/ethod No. FLAT PACKAGED-PRODUCT TEST Shock drop PACKAGED PRODUCT TRANSIT TESTING ISTA 3A (150 LBS OR LESS) - ODIFIED Shipments 70kg (150 lb) or Less (FLAT)] Page 9 of 22 9 drops follow sequence below; Drop number < 70 lb (32 kg) > 70 lb (32 kg) and < Orientati on of drop 150 lb (70 kg) 1 18 in (460 mm) 12 in (300 mm) Edge in (460 mm) 12 in (300 mm) Edge in (460 mm) 12 in (300 mm) Edge in (460 mm) 12 in (300 mm) Corner in (460 mm) 12 in (300 mm) Corner in (460 mm) 12 in (300 mm) Edge in (460 mm) 12 in (300 mm) Edge in (910 mm) 24 in (600 mm) Face in (460 mm) 12 in (300 mm) Face 3 [FLAT PACKAGED-PRODUCT TEST] [Vibration] Drop Height: 18 Double Height Drop: 36 Fixed displacement without top load - 3 axis (Base/Panel 3, Side/Panel 2 or 4 & Back Down/ Panel 5 or 6) - 15 minutes each axis. odification: 15 minutes each axis, no Dynamic Top-Load, no Over-the-Road random vibration spectrum, no Pick-Up and Delivery Vehicle spectrum, no Air spectrum and no Vacuum

10 PACKAGED PRODUCT TRANSIT TESTING ISTA 3A (150 LBS OR LESS) - ODIFIED Page 10 of 22 Evaluation Citation/ethod No. Shock drop Shipments 70kg (150 lb) or Less (FLAT)] 8 drops follow sequence below; Drop numb er Drop Height < 70 lb (32 kg) Drop Height For > 70 lb (32 kg) and < 150 lb Orientation of drop (70 kg) 1 18 in (460 mm) 12 in (300 mm) Edge in (460 mm) 12 in (300 mm) Edge in (460 mm) 12 in (300 mm) Edge in (460 mm) 12 in (300 mm) Corner in (460 mm) 12 in (300 mm) Corner in (460 mm) 12 in (300 mm) Corner in (910 mm) 24 in (600 mm) ost critical or damage prone flat orientation 8 18 in (460 mm) 12 in (300 mm) Face 2 on hazard Record choice and rational of most critical orientation Drop Height: 18 Double Height Drop: 36

11 PACKAGED PRODUCT TRANSIT TESTING ISTA 3A (150 LBS OR LESS) - ODIFIED Page 11 of 22 Evaluation Citation/ethod No. Shock - rotational edge drop Shipments 70kg (150 lb) or Less (FLAT)] Shock - full rotational flat drop With one edge of face 3 placed on support, drop opposite edge from a height of 8 inches (200 mm). Test in sequence; 1. Longest edge 2. Next longest edge radiating 90º from edge tested in Opposite edge of edge tested in 2. Shipments 70kg (150 lb) or Less (FLAT)] Shock concentrated impact Place sample so that smallest face rests on test surface. When pushed over, face 3 shall impact test surface. Repeat with next largest face but ensure, face 3 impacts the test surface Shipments 70kg (150 lb) or Less (FLAT)] Drop hazard box from 16 inches (400 mm) onto midpoint of longest and shortest dimensions of face 1.

12 Evaluation Citation/ethod No. ELONGATED PACKAGED-PRODUCT TEST Shock drop PACKAGED PRODUCT TRANSIT TESTING ISTA 3A (150 LBS OR LESS) - ODIFIED Shipments 70kg (150 lb) or Less (ELONGATED)] Page 12 of 22 9 drops follow sequence below; Drop number < 70 lb (32 kg) > 70 lb (32 kg) and < 150 lb (70 Orientation of drop kg) 1 18 in (460 mm) 12 in (300 mm) Edge in (460 mm) 12 in (300 mm) Edge in (460 mm) 12 in (300 mm) Edge in (460 mm) 12 in (300 mm) Corner in (460 mm) 12 in (300 mm) Corner in (460 mm) 12 in (300 mm) Edge in (460 mm) 12 in (300 mm) Edge in (910 mm) 24 in (600 mm) Face in (460 mm) 12 in (300 mm) Face 3 [ELONGATED PACKAGED-PRODUCT TEST] [Vibration] NA - Fixed displacement without top load - 3 axis (Base/Panel 3, Side/Panel 2 or 4 & Back Down/ Panel 5 or 6) - 15 minutes each axis. odification: 15 minutes each axis, no Dynamic Top-Load, no Over-the-Road random vibration spectrum, no Pick-Up and Delivery Vehicle spectrum, no Air spectrum and no Vacuum NA -

13 PACKAGED PRODUCT TRANSIT TESTING ISTA 3A (150 LBS OR LESS) - ODIFIED Page 13 of 22 Evaluation Citation/ethod No. Shock drop Shipments 70kg (150 lb) or Less (ELONGATED)] 8 drops follow sequence below; Drop numb er Drop Height < 70 lb (32 kg) Drop Height For > 70 lb (32 kg) and < 150 lb Orientation of drop (70 kg) 1 18 in (460 mm) 12 in (300 mm) Edge in (460 mm) 12 in (300 mm) Edge in (460 mm) 12 in (300 mm) Edge in (460 mm) 12 in (300 mm) Corner in (460 mm) 12 in (300 mm) Corner in (460 mm) 12 in (300 mm) Corner in (910 mm) 24 in (600 mm) ost critical or damage prone flat orientation 8 18 in (460 mm) 12 in (300 mm) Face 2 on hazard Record choice and rational of most critical orientation NA -

14 PACKAGED PRODUCT TRANSIT TESTING ISTA 3A (150 LBS OR LESS) - ODIFIED Page 14 of 22 Evaluation Citation/ethod No. Shock - rotational edge drop Shipments 70kg (150 lb) or Less (ELONGATED)] Shock - full rotational flat drop With opposite edge of face 3 placed on support, drop test edge from a height of 8 inches (200 mm). Test in sequence; 1. Longest edge 2. Next longest edge radiating 90º from Opposite edge of 2. Shipments 70kg (150 lb) or Less (ELONGATED)] NA - Shock - bridge impact Place sample so that smallest face rests on test surface. When pushed over, face 3 shall impact test surface. Repeat with next largest face but ensure, face 3 impacts the test surface [Applicable for Packaged-Products for Parcel Delivery System Shipments 70kg (150 lb) or Less (ELONGATED)] NA - Drop hazard box from 16 inches (400 mm) above face 1 of sample. Hazard box shall impact the midpoint across the longest dimension of face 1. Drop hazard box s angle iron bottom edge shall be parallel to shortest dimension of face 1. Sample shall be placed on two support blocks. NA - Note: The blocks used for the Bridge Impact Test for Elongated Package Configurations shall be positioned so that they are flush with the carton ends.

15 PACKAGED PRODUCT TRANSIT TESTING ISTA 3A (150 LBS OR LESS) - ODIFIED Page 15 of 22 Evaluation Citation/ethod No. Optional Evaluation # Bursting strength # Edgewise compressive strength TAPPI T 810 om-06 modified TAPPI T839 om-08 modified 1 1 Report actual odification = Condition 21 ± 1 C (70 ± 2 F) and 65 ± 2% RH Report actual odification = Condition 21 ±1 C (70 ±2 F) and 65 ±2% R.H. NT (Not Requested) NT (Not Requested) - - Note: Pass/fail criteria = after sequential completion of all required tests, there shall be no damage to the package box and the product(s) contained within the package box. Each of the following cases constitutes damage : Puncture of package box greater than 9 square inches or 10% of the damaged box surface, Failure of the tape or seal, Any part(s) escape the package box, Any damage (even the slightest scratch, chip, dent, or marking) to the actual product.

16 Photos Required For Transit Test Reporting (as applicable) 1 Isometric view showing printing and warning signs (NOTE: When taking this photo all writing and warning labels must be visible and readable. This is the only digital where it needs to be readable.) 2 Front view 3 Back view 4 Blister pack with parts, and where located 5 Packing foam 6 Rear face with bottom packing 7 Close up of bottom packing 8 Isometric view of packing materials 9 Close up of foam corner 10 Front face of product with shimming. 11 Photos of broken packing (foam) regardless of pass or fail. State where located 12 Close up of damaged carton. State where located 13 Close up of damaged product. State where damage located. Page 16 of 22 Key: * Additional Charge For This Test ** andatory Requirement # By request only Results Key: eets N Does Not eet NA Not Applicable NT Not Tested C Claimed R Recorded

17 Page 17 of 22 EXHIBIT # EXHIBIT # 2 FRONT VIEW

18 Page 18 of 22 EXHIBIT # 3 REAR VIEW EXHIBIT # 4

19 Page 19 of 22 EXHIBIT # 5 EXHIBIT # 6

20 Page 20 of 22 EXHIBIT # 7 EXHIBIT # 8

21 Page 21 of 22 EXHIBIT # 9 EXHIBIT # 10

22 Page 22 of 22 EXHIBIT # 11 EXHIBIT # 12

DILLARD S TEST PROTOCOL FOR DILR US PACKAGED PRODUCT TRANSIT TESTING ISTA (ELONGATED CONFIGURATION: 150 LBS OR LESS) (V8)

DILLARD S TEST PROTOCOL FOR DILR US PACKAGED PRODUCT TRANSIT TESTING ISTA (ELONGATED CONFIGURATION: 150 LBS OR LESS) (V8) Test Date: Reviewed By/Date: DILLARD S TEST PROTOCOL FOR OVER PACKAGING Labeling 1 Label identifying an "Over-packaged product for drop / vibration testing" : Report if present Over-packaged Inspection

More information

DILLARD S TEST PROTOCOL FOR DILR US PACKAGED PRODUCT TRANSIT TESTING ISTA (FLAT CONFIGURATION; 150 LBS. OR LESS) (V8)

DILLARD S TEST PROTOCOL FOR DILR US PACKAGED PRODUCT TRANSIT TESTING ISTA (FLAT CONFIGURATION; 150 LBS. OR LESS) (V8) Test Date: Reviewed By/Date: OVER PACKAGING Labeling DILLARD S TEST PROTOCOL FOR 1 Label identifying an "Over-packaged product for drop / vibration testing"; Report if present. Over - packaged Inspection

More information

DILLARD'S INC TEST PROTOCOL FOR DILL USA- (V22) HANDBAG (CHILDREN)

DILLARD'S INC TEST PROTOCOL FOR DILL USA- (V22) HANDBAG (CHILDREN) By/Date: Page 1 of 6 SCOPE: This protocol is applicable for testing of handbag for children. SUPPLEENTAY POTOCOL Note: Additional cost, sample size and TAT may be required if testing to 1 or more supplemental

More information

TESTING REPORT Procedure used: 3A - STANDARD 3A - SMALL

TESTING REPORT Procedure used: 3A - STANDARD 3A - SMALL TESTING REPORT Procedure used: 3A - STANDARD 3A - SMALL > ISTA CERTIFIED LABORATORY 3A - FLAT 3A - LONG VERSION DATE: 2008 ( 2014 ) Laboratory : Address : Building B, Taineng Park, Xiyuan 6th Road ISTA

More information

REPORT. Lab Number: (5105) Page 1 of 1. Index

REPORT. Lab Number: (5105) Page 1 of 1. Index REPORT Lab Number: (5105) 213-0075 Page 1 of 1 Cover Report Protocol Exhibits Other Index 1 Page 1 Page 4 Pages N/A 1 Page Technical Report: (5105)213-0075 August 04, 2005 Date Received: August 01, 2005

More information

DILLARD S TEST PROTOCOL FOR DILR US LUGGAGE (V26)

DILLARD S TEST PROTOCOL FOR DILR US LUGGAGE (V26) Test Date: Reviewed By/Date: SUPPLEMENTAL PROTOCOLS DILLARD S TEST PROTOCOL FOR 1 The sample shall be reviewed against the requirements of California Proposition 65 to determine if additional testing or

More information

REPORT. Lab Number: (5105) Page 1 of 1. Index

REPORT. Lab Number: (5105) Page 1 of 1. Index REPORT Lab Number: (5105)069-0100 Page 1 of 1 Cover Report Protocol Exhibits Other Index 1 Page 2 Pages 6 Pages N/A 1 Page TEST REPORT BATTERY HOUSE LAB LOCATION: BUFFALO, NY 365 24 TH STREET LAB NUMBE

More information

Result: The marking on front tires and rear tires were not conformed to the client s Spec. Please refer to below photos for details.

Result: The marking on front tires and rear tires were not conformed to the client s Spec. Please refer to below photos for details. I. GENERAL INFORMATION Service Performed: Client: / Supplier: Factory: Product Name: P.O. No.: / Item No.: Destination Country: / Pre-Shipment Inspection Zhejiang Bode Industrial Co.,Ltd Zhejiang Bode

More information

OFS Brands Test Facility Report No: OFSB Date: April 2, 2015 Page: 1 of 29. Test Report For: ANSI/BIFMA X Storage Units.

OFS Brands Test Facility Report No: OFSB Date: April 2, 2015 Page: 1 of 29. Test Report For: ANSI/BIFMA X Storage Units. Date: April 2, 2015 Page: 1 of 29 Test Report For: ANSI/BIFMA X5.9-2012 Storage Units FastenLink This report shall not be reproduced, except in full, without written permission from OFS Brands Quality

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11272-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 18.10.2017 to 17.10.2022 Holder of certificate: VDZ

More information

2.0 TEST PROCEDURES AND RESULTS Vibration Test TEST EQUIPMENT AND INSTRUMENTATION QUALITY ASSURANCE PROGRAM 7 ATTACHMENTS

2.0 TEST PROCEDURES AND RESULTS Vibration Test TEST EQUIPMENT AND INSTRUMENTATION QUALITY ASSURANCE PROGRAM 7 ATTACHMENTS Page No. 2 TABLE OF CONTENTS Page No. 1.0 INTRODUCTION 3 1.1 Scope 3 1.2 References 3 1.3 Test Specimen Description 3 1.4 Summary 3 2.0 TEST PROCEDURES AND RESULTS 4 2.1 Vibration Test 4 3.0 TEST EQUIPMENT

More information

Test Report No: EEC18/01 dated August 02, 2018

Test Report No: EEC18/01 dated August 02, 2018 Note: This report is issued subject to the Testing and Certification Regulations of the TÜV SÜD Group and the General Terms and Conditions of Business of TÜV SÜD PSB Pte Ltd. In addition, this report is

More information

: JUSTFOG DONGGUAN CO., LTD. BLDG, 3, DASHADUN INDUSTRIAL PAPK, WUSHAJIANGBEI VILLAGE, CHANG AN TOWN, DONGGUAN. SUMMARY OF TEST RESULTS

: JUSTFOG DONGGUAN CO., LTD. BLDG, 3, DASHADUN INDUSTRIAL PAPK, WUSHAJIANGBEI VILLAGE, CHANG AN TOWN, DONGGUAN. SUMMARY OF TEST RESULTS TEST REPORT LAB NO. : (8816)0630026 PAGE : 1 OF 11 APPLICANT : JUSTFOG DONGGUAN CO., LTD. BLDG, 3, DASHADUN INDUSTRIAL PAPK, WUSHAJIANGBEI VILLAGE, CHANG AN TOWN, DONGGUAN. DATE OF SUBMISSION : Mar 3,

More information

COMPANY PROFILE IRE-TEX CORPORATION BERHAD A

COMPANY PROFILE IRE-TEX CORPORATION BERHAD A Ire-Tex Group of Companies Cal-Test Laboratory Sdn Bhd (523396-U) GH Packaging Sdn Bhd (251096-P) Ire-Tex (Malaysia) Sdn Bhd (351185-T) Ire-Tex (KL) Sdn Bhd (867981-M) Ire-Tex Asset Management Sdn Bhd

More information

MPG526-L Kayak Stacker Instructions

MPG526-L Kayak Stacker Instructions MALO LONER REV2 4/16 MPG526-L Kayak Stacker Instructions Installation and Loading Instructions - Please Read Before Beginning Whats included: (2) Kayak Stackers (2) Sets of Mounting Brackets: Upper and

More information

There were no pallet numbers written on the pallets (need confirmation how to write it ) Product data measurement PASSED Tested products passed

There were no pallet numbers written on the pallets (need confirmation how to write it ) Product data measurement PASSED Tested products passed Client: [Client name] QC Type: Pre-shipment Quality control Factory: Aluminium factory (Group) Co., Ltd QC date: 01 July 2018 Final Random Inspection Report Service Number: PSI General Information Product

More information

: PARTICLE INDUSTRIES, INC 126 POST ST, 4TH FLOOR, SAN FRANCISCO, CA USA SUMMARY OF TEST RESULTS

: PARTICLE INDUSTRIES, INC 126 POST ST, 4TH FLOOR, SAN FRANCISCO, CA USA SUMMARY OF TEST RESULTS TEST REPORT APPLICANT DATE OF SUBMISSION : NOV 12, 2018 PAGE : 1 OF 10 : PARTICLE INDUSTRIES, INC 126 POST ST, 4TH FLOOR, SAN FRANCISCO, CA 94108 USA TEST PERIOD : NOV 12, 2018 TO NOV 20, 2018 SAMPLE DESCRIPTION

More information

UniTorq UTQ Quarter-Turn Actuator Installation and Operation Manual

UniTorq UTQ Quarter-Turn Actuator Installation and Operation Manual UniTorq UTQ 1.5 6.4 Quarter-Turn Actuator Installation and Operation Manual Thank you for purchasing our UTQ 1.5-6.0 Electric Actuators Before installation or operation of the actuator carefully review

More information

Manufacturing Facility is ISO9001:2000. Welded Steel Pipe Conform to ASTM A53. Threads Conform to ASME B1.20.1

Manufacturing Facility is ISO9001:2000. Welded Steel Pipe Conform to ASTM A53. Threads Conform to ASME B1.20.1 STEEL NIPPLES S40 & S80 Steel Nipple Product Specifications Manufacturing Facility is ISO9001:2000 Welded Steel Pipe Conform to ASTM A53 Threads Conform to ASME B1.20.1 800-678-2544 800-678-0857 www.msi-products.com

More information

QA INTERNATIONAL, LTD. INSPECTION REPORT

QA INTERNATIONAL, LTD. INSPECTION REPORT Report No.: QAIXXXXXX Job No.: XXXX Date: XXXXX Page 1 of 12 INSPECTION SUMMARY DETAILS QAI CLIENT COMPANY: XXXXX INSPECTION DATE: XXXXX QAI CLIENT CONTACT: FACTORY NAME: XXXXX CC: - SUPPLIER / AGENT:

More information

Page 2 of 23 UNT150420C11

Page 2 of 23 UNT150420C11 Page 2 of 23 UNT150420C11 United Nations, Recommendations on the Transport of Dangerous Goods, Manual of Test and Criteria (Rev. 5 th, Amendment 2), Section 38.3 Report Reference No.... : Compiled by...

More information

JUVENILE PRODUCTS MANUFACTURERS ASSOCIATION INC / JPMA

JUVENILE PRODUCTS MANUFACTURERS ASSOCIATION INC / JPMA CONSUER PRODUCTS SERVICES DIVISION JUVENILE PRODUCTS ANUFACTURERS ASSOCIATION INC / JPA Date Received: Page 1 of 13 TERRY GOFFE SUER INFANT, INC. 1275 PARK EAST DRIVE WOONSOCKET, RI 02895 UNITED STATES

More information

DILLARD'S INC TEST PROTOCOL FOR DILL USA- (V13) KEYCHAIN / BATTERY OPERATED KEYCHAIN / KEYCHAIN WITH LIGHT

DILLARD'S INC TEST PROTOCOL FOR DILL USA- (V13) KEYCHAIN / BATTERY OPERATED KEYCHAIN / KEYCHAIN WITH LIGHT By/Date: Page 1 of 5 Criteria Notes esults ating SCOPE: This protocol is applicable for testing of keychain / battery operated keychain / keychain with light. SUPPLEMENTY POTOCOL Note: dditional cost,

More information

PRODUCT RELIABILITY TESTING: Environmental, Mechanical and Packaging Case study: 19 Rackmount Switch

PRODUCT RELIABILITY TESTING: Environmental, Mechanical and Packaging Case study: 19 Rackmount Switch PRODUCT RELIABILITY TESTING: Environmental, Mechanical and Packaging Case study: 19 Rackmount Switch Herb Schueneman President & CEO Presenter Mike Brown Laboratory Manager Presenter June 2015 Overview

More information

Thermal Wraps. GT Exhaust Accessories Installation and Operation Manual. Rev. A. Copyright 2012 GT Exhaust, Inc. All Rights Reserved

Thermal Wraps. GT Exhaust Accessories Installation and Operation Manual. Rev. A. Copyright 2012 GT Exhaust, Inc. All Rights Reserved Thermal Wraps GT Exhaust Accessories Installation and Operation Manual Rev. A Copyright 2012 GT Exhaust, Inc. All Rights Reserved Published: December 20, 2012 NOTICE The instructions herein must be expressly

More information

CLASSIFICATION NOTES. Type Testing Procedure for. Crankcase Explosion Relief Valves

CLASSIFICATION NOTES. Type Testing Procedure for. Crankcase Explosion Relief Valves CLASSIFICATION NOTES Type Testing Procedure for Crankcase Explosion Relief Valves Contents 1. Scope, Application 2. Recognized Standards 3. Purpose 4. Test Facilities 5. Explosion Test Process 6. Testing

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK (part of Smithers Rapra and Ltd) Packaging Technical Services Cleeve Road Leatherhead Surrey KT22 7RU Contact: Mr G Collis Tel: +44 (0)1372 802000 Fax: +44 (0)1372 802245 E-Mail: gcollis@smithers.com Website:

More information

Repeat procedure for both sides of U bar.

Repeat procedure for both sides of U bar. Repeat procedure for both sides of U bar. PATIO FURNITURE & ACCESSORIES ASSEMBLY INSTRUCTIONS Bella Luna 3pc Bar Set - Lighted Bar Table KSN: 460-050904-6 D7 M5685 UPC: 050874066756 IMPORTANT!!! STOP!

More information

36" Galvanized Direct Drive Hyflo Fan Installation and Operators Instruction Manual. Fan and Framing Dimensions

36 Galvanized Direct Drive Hyflo Fan Installation and Operators Instruction Manual. Fan and Framing Dimensions 6" Galvanized Direct Drive Hyflo Fan Installation and Operators Instruction Manual Fan and Framing Dimensions Planning the layout of the spacing between Fans is very important. Spacing too close together

More information

Installation Instructions HOSS Hardtop Cart Only

Installation Instructions HOSS Hardtop Cart Only Installation Instructions HOSS Hardtop Cart Only Hardtop Organized Storage System Application: Hard Top Storage System Part Number: 42804 www.bestop.com - We re here to help! Visit our web site and click

More information

: SHENZHEN INNOKIN TECHNOLOGY CO., LTD BUILDING 6,XINXINTIAN INDUSTRIAL PARK, XINSHA ROAD, SHAJING,BAOAN DISTRICT,SHENZHEN, CHINA

: SHENZHEN INNOKIN TECHNOLOGY CO., LTD BUILDING 6,XINXINTIAN INDUSTRIAL PARK, XINSHA ROAD, SHAJING,BAOAN DISTRICT,SHENZHEN, CHINA TEST REPORT PAGE : 1 OF 19 APPLICANT : SHENZHEN INNOKIN TECHNOLOGY CO., LTD BUILDING 6,XINXINTIAN INDUSTRIAL PARK, XINSHA ROAD, SHAJING,BAOAN DISTRICT,SHENZHEN, CHINA DATE OF SUBMISSION : JUL 24, 2017

More information

HATCHGRIP Installation Instructions/Operation and Maintenance Manual

HATCHGRIP Installation Instructions/Operation and Maintenance Manual HATCHGRIP Installation Instructions/Operation and Maintenance Manual Models: HTG-PCG Contact Information Table of Contents: Safety Precautions... 2 Product Information... 2 Operation... 3 Installation

More information

APPLICANT : FLASHBAY ELECTRONICS BLDG B&C XI FENG CHENG IND ZONE, NO. 2 FUYUAN ROAD HE PING, VILLAGE, FUYONG TOWN, SHENZHEN SUMMARY OF TEST RESULTS

APPLICANT : FLASHBAY ELECTRONICS BLDG B&C XI FENG CHENG IND ZONE, NO. 2 FUYUAN ROAD HE PING, VILLAGE, FUYONG TOWN, SHENZHEN SUMMARY OF TEST RESULTS TEST REPORT LAB NO. : (9317)313-0504 PAGE : 1 OF 15 APPLICANT : FLASHBAY ELECTRONICS BLDG B&C XI FENG CHENG IND ZONE, NO. 2 FUYUAN ROAD HE PING, VILLAGE, FUYONG TOWN, SHENZHEN CONTACT PERSON : LEVIN DATE

More information

Installation Instructions Supertop for Truck

Installation Instructions Supertop for Truck Installation Instructions Supertop for Truck Vehicle Application: Ford F-150 5.5 Ft. Styleside 2004 and newer Part Number: 76309 www.bestop.com - We re here to help! Visit our web site and click on Ask

More information

MANUFACTURER : FLASHBAY ELECTRONICS BLGD B&C XI FENG CHENG IND ZONE, NO. 2 FUYUAN ROAD HE PING, VILLAGE, FUYONG TOWN, SHENZHEN

MANUFACTURER : FLASHBAY ELECTRONICS BLGD B&C XI FENG CHENG IND ZONE, NO. 2 FUYUAN ROAD HE PING, VILLAGE, FUYONG TOWN, SHENZHEN TEST REPORT LAB NO. : (9317)097-0679-R1 PAGE : 1 OF 13 The report is amendment of and supersedes the previous report (9317)097-0679 dated Apr 26, 2017 APPLICANT : FLASHBAY ELECTRONICS BLGD B&C XI FENG

More information

Technical Service Bulletin

Technical Service Bulletin Technical Service Bulletin Page 1 of 8 SUBJECT: CONVERTIBLE TOP WEAR AND ADJUSTMENTS No: DATE: June, 2011 MODEL: 2007 11 Eclipse Spyder CIRCULATE TO: [ ] GENERAL MANAGER [ X ] PARTS MANAGER [ X ] TECHNICIAN

More information

SlimRack Slide-out COMPONENTS ASSEMBLY MANUAL. Rev: Page 1 SlimRack Components Assembly Manual

SlimRack Slide-out COMPONENTS ASSEMBLY MANUAL. Rev: Page 1 SlimRack Components Assembly Manual SlimRack Slide-out COMPONENTS ASSEMBLY MANUAL Rev: 11.16.2017 Page 1 SlimRack Components Assembly Manual TABLE OF CONTENTS Product Information 2 Additional Warranty Exclusions 2 Safety Information 2 Resources

More information

Active Controlled Cooling System

Active Controlled Cooling System Active Controlled Cooling System April 2011 3267 Progress Dr Orlando, FL 32826 www.apecor.com Preliminary www.apecor.com Table of Contents General Information... 3 Safety... 3 Introduction... 3 What s

More information

COMMAND SERIES 410-L T L T T T L06R RS PRODUCT MANUAL

COMMAND SERIES 410-L T L T T T L06R RS PRODUCT MANUAL COMMAND SERIES 40-L06 40-T09 420-L06 420-T06 420-T09 420-T5 420-L06R 420-009RS PRODUCT MANUAL TABLE OF CONTENTS COMMAND REFERENCE GUIDE INTRODUCTION Command Reference Guide 3 Physical Characteristics &

More information

BroadBand PowerShield. 20 AHr Battery. User Manual

BroadBand PowerShield. 20 AHr Battery. User Manual BroadBand PowerShield 20 AHr Battery User Manual 990-1316A 10/2004 Chapter 1 General Information The PowerShield provides a power source for broadband telephony applications. Important Safety Instructions

More information

Installation Instructions Trektop NX

Installation Instructions Trektop NX Installation Instructions Trektop NX Vehicle Application: Jeep Wrangler (JK) 2 Door 2007 Current Part Number: 56822 www.bestop.com - We re here to help! Visit our web site and click on Ask a Question.

More information

Installation Instructions/Operation and Maintenance Manual. PS DOORS Contact Information. Website psdoors.com

Installation Instructions/Operation and Maintenance Manual. PS DOORS Contact Information. Website psdoors.com Rev. 110717 Ladder Safety Gate Installation Instructions/Operation and Maintenance Manual Models All Models: LSG-15 to LSG-48 Table of Contents Product Information...2 Inspection & Maintenance...2 Warranty

More information

Installation Instructions Trektop NX

Installation Instructions Trektop NX Installation Instructions Trektop NX Vehicle Application: Jeep Wrangler (JK) 2 Door 2007 Current Part Number: 56822 www.bestop.com - We re here to help! Visit our web site and click on Ask a Question.

More information

Installation Instructions/Operation and Maintenance Manual. PS DOORS Contact Information. Website psdoors.com

Installation Instructions/Operation and Maintenance Manual. PS DOORS Contact Information. Website psdoors.com Ladder Safety Gate Installation Instructions/Operation and Maintenance Manual Models All Models: LSG-5 to LSG-48 Table of Contents Product Information...2 Inspection & Maintenance...2 Warranty Information...2

More information

IFC-BL02 Interface Free Controller Brushless Motor Card

IFC-BL02 Interface Free Controller Brushless Motor Card IFC-BL02 Interface Free Controller Brushless Motor Card User s Manual V1.1 Apr 2008 Information contained in this publication regarding device applications and the like is intended through suggestion only

More information

Models DP10 & DP20 Series Low Voltage Disconnects User s Manual Rev. 1.1 October 31, 2007

Models DP10 & DP20 Series Low Voltage Disconnects User s Manual Rev. 1.1 October 31, 2007 B R A N D Models DP10 & DP20 Series Low Voltage Disconnects User s Manual Rev. 1.1 October 31, 2007 For Sales, Support and Service phone: 407-331-4793 fax: 407-331-4708 website: www.xenotronix.com email:

More information

SPV Series Slides OPERATING MANUAL. Table of contents 1 Introduction Compliance with the EC Directives Names of parts...

SPV Series Slides OPERATING MANUAL. Table of contents 1 Introduction Compliance with the EC Directives Names of parts... HL-17012 SPV Series Slides OPERATING MANUAL Thank you for purchasing an Oriental Motor product. This Operating Manual describes product handling procedures. Please read this Operating Manual and the separate

More information

SUNTURA SOLAR TRACKER

SUNTURA SOLAR TRACKER WindyNation SUNTURA SOLAR TRACKER SOT-TRKS-NF User s Manual Page 1 of 10 WindyNation 08/09/2012 Table of Contents 1 Introduction... 3 1.1 Limited Warranty... 3 1.2 Restrictions... 3 1.3 Warranty Claims

More information

Specification. Cylindrical Li-ion battery. Type: Product model battery VER A Product Specification 3. 6 V 2600 mah

Specification. Cylindrical Li-ion battery. Type: Product model battery VER A Product Specification 3. 6 V 2600 mah Product Specification 3. 6 V 2600 mah Date 2005/1/3 Cylindrical Li-ion battery Specification Type: 18650 1 Te l: 510-525-4710 Fax: 510-525-4728 Toll Free: 1-800-448-4428 Product model 18650 battery VER

More information

SFI SPECIFICATION 35.2 EFFECTIVE: DECEMBER 29, 2014 *

SFI SPECIFICATION 35.2 EFFECTIVE: DECEMBER 29, 2014 * SFI SPECIFICATION 35.2 EFFECTIVE: DECEMBER 29, 2014 * PRODUCT: Heavy Duty Stock Car Steel Wheels 1.0 GENERAL INFORMATION 1.1 This SFI Specification establishes uniform test procedures and minimum standards

More information

TRANSPORT OF DANGEROUS GOODS

TRANSPORT OF DANGEROUS GOODS Recommendations on the TRANSPORT OF DANGEROUS GOODS Manual of Tests and Criteria Fifth revised edition Amendment 1 UNITED NATIONS SECTION 38 38.3 Amend to read as follows: "38.3 Lithium metal and lithium

More information

INSTALLATION & OPERATING INSTRUCTIONS: REVOLUTION SPINEBOARD ATTACHMENT WARNING

INSTALLATION & OPERATING INSTRUCTIONS: REVOLUTION SPINEBOARD ATTACHMENT WARNING INSTALLATION & OPERATING INSTRUCTIONS: REVOLUTION SPINEBOARD ATTACHMENT LOAD CAPACITY: 500 LBS [227 kg] MANDATORY: LEAVE THIS MANUAL WITH LIFT OWNER WARNING 1. READ AND FOLLOW ALL INSTRUCTIONS. LIFT SAFETY

More information

Supertop Replacement Top with Tinted Side and Rear Windows Installation Instructions

Supertop Replacement Top with Tinted Side and Rear Windows Installation Instructions Supertop Replacement Top with Tinted Side and Rear Windows Installation Instructions TM Inc. For: Wrangler TJ 1997 2002 Part Number: 55629 Does Not Include Hardware This product is only designed for the

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 DEKRA IST RELIABILITY SEVICES INC. No. 22 Puding Rd., East Dist. Hsinchu City 300, Taiwan, R.O.C. Phone: 886 3 579 5766 ext 7100 Mr. General Lee general.lee@dekra-ist.com

More information

TEST REPORT. Report No.: G Rendered to: VELUX America LLC Greenwood, South Carolina

TEST REPORT. Report No.: G Rendered to: VELUX America LLC Greenwood, South Carolina TEST REPORT Report No.: G4212.01-109-44 Rendered to: VELUX America LLC Greenwood, South Carolina PRODUCT TYPE: Skylight with Curb SERIES/MODEL: Specials Dome Skylight 0.118 thickness PC smooth/0.118 thickness

More information

June Return Condition Guidelines June, 2011

June Return Condition Guidelines June, 2011 June, 2011 Mopar policies ensure parts are returned in new, unused, undamaged, and saleable condition Examples of Acceptable and Not Acceptable returns are provided on the following pages Please use this

More information

710 Splicing Rig. Instructions. January E

710 Splicing Rig. Instructions. January E 710 Splicing Rig Instructions January 2007 Table of Contents 1.0 General Statement...4 2.0 3M 710-UTK25A Splicing Rig and Field Maintenance Kit...4 3.0 Straight Splicing using the 3M 710 25-pair modules...6

More information

INSTALLATION INSTRUCTION & OWNER S MANUAL

INSTALLATION INSTRUCTION & OWNER S MANUAL CS-2500 & CS-2500P Water Filtration System INSTALLATION INSTRUCTION & OWNER S MANUAL Ver 1.2 All Rights Reserved APEC Water Systems Please keep this Owner s Manual for future reference. It contains useful

More information

CHAPTER 64 TAIL ROTOR. Section Title Page

CHAPTER 64 TAIL ROTOR. Section Title Page CHAPTER 64 TAIL ROTOR Section Title Page 64-00 Description........................................ 64.1 64-10 Tail Rotor Assembly.................................. 64.1 64-11 Static Balance..............................

More information

Li-ion Rechargeable Button Cell. Specification

Li-ion Rechargeable Button Cell. Specification Customer: Specification Model: LIR2032 Prepared By/Date Checked By/Date Approved By/Date Note:1.Kindly please sign on the above and send it back to us if the sample is approved. 2.Kindly please contact

More information

For: Model Year Jeep Wrangler/TJ Part Number: For: Model Year Jeep Wrangler/TJ Part Number: 58709

For: Model Year Jeep Wrangler/TJ Part Number: For: Model Year Jeep Wrangler/TJ Part Number: 58709 TJ Tinted Window Kit Installation Instructions TM For: 1997-2002 Model Year Jeep Wrangler/TJ Part Number: 58609 For: 2003-2004 Model Year Jeep Wrangler/TJ Part Number: 58709 www.bestop.com Inc. DO NOT

More information

IAQ-CALC TM Indoor Air Quality Meter

IAQ-CALC TM Indoor Air Quality Meter ENERGY AND COMFORT Indoor Air Quality IAQ-CALC TM Indoor Air Quality Meter Model 7515 Operation and Service Manual Copyright TSI Incorporated / May 2007 / All rights reserved. LIMITATION OF WARRANTY AND

More information

CYL-EH, CYL-EH-FF, CYL-EH-FP, & CYL-EH-FP-FF Cylinder Dollies Instruction Manual

CYL-EH, CYL-EH-FF, CYL-EH-FP, & CYL-EH-FP-FF Cylinder Dollies Instruction Manual Vestil Manufacturing Co. 2999 North Wayne Street, P.O. Box 507, Angola, IN 46703 Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868 Fax: (260) 665-1339 www.vestilmfg.com e-mail: sales@vestil.com CYL-EH,

More information

SUNTURA HD SOLAR TRACKER

SUNTURA HD SOLAR TRACKER WindyNation SUNTURA HD SOLAR TRACKER SOT-TRKS-NFHD User s Manual Page 1 of 11 WindyNation 08/09/2012 Table of Contents 1! Introduction... 3! 1.1! Limited Warranty... 3! 1.2! Restrictions... 3! 1.3! Warranty

More information

Carbon Steel Nipples

Carbon Steel Nipples CORPORATE OFFICE TEL (800) 766-0076 LOCAL (323) 890-4455 WWW.SMITHCOOPER.COM FAX (323) 890-4456 Carbon Steel Nipples Schedule 40 & 80 Welded, Schedule 80 Seamless, & XXH Seamless Carbon Steel Nipples Specifications

More information

BlinkerBeam Solar Controller

BlinkerBeam Solar Controller Blinker Division Solar LED Solutions The Route To Safety, One Solution At A Time BlinkerBeam Solar Controller BlinkerSign, BlinkerBeacon or RRFB 2.0 with 55 W Solar Panel User Guide TAPCO Traffic & Parking

More information

FIXED POWER FACTOR CORRECTION EQUIPMENT 5KV CLASS MEDIUM VOLTAGE SECTION Z

FIXED POWER FACTOR CORRECTION EQUIPMENT 5KV CLASS MEDIUM VOLTAGE SECTION Z PART 1 GENERAL 1.01 1.02 1.03 1.04 1.05 SCOPE The Contractor shall furnish and install fixed power factor correction equipment as specified herein and as shown on the contract drawings. This specification

More information

Music Stands CONTENTS. Assembly and Owner s Manual. Note: Note:

Music Stands CONTENTS. Assembly and Owner s Manual. Note: Note: Assembly and Owner s Manual Music Stands Bravo Stand Roughneck Stand Classic 50 Stand Preface Stand Preface Conductor s Stand CONTENTS Important User Information...........................2 General......................................2

More information

Installation Instructions

Installation Instructions Installation Instructions Trektop Doors not included Vehicle Application Jeep Wrangler Unlimited 2007 2011 Part Number: 56805 www.bestop.com - We re here to help! Visit our web site and click on Ask a

More information

Mounting Instructions Welded Coupling Mounting Instructions Welded Coupling

Mounting Instructions Welded Coupling Mounting Instructions Welded Coupling Mounting Instructions Welded Coupling Rev.08 (2014.06) OL Page 1 of 11 Table of contents I. STRUCTURE OF THE MANUAL / CLARIFICATION... 3 II. SAFETY AND HEALTH CONCERNS... 4 1 INTRODUCTION... 5 2 GENERAL

More information

Level Alert Model Multi-Switch Liquid Level Sensor. Assembly and Installation Instructions

Level Alert Model Multi-Switch Liquid Level Sensor. Assembly and Installation Instructions Level Alert Model 2000 Multi-Switch Liquid Level Sensor Assembly and Installation Instructions Kit Form Each unit is provided in kit form with step-by-step instructions, making it extremely easy to custom

More information

Quick Connection Cabinet (QCC)

Quick Connection Cabinet (QCC) Quick Connection Cabinet (QCC) Installation / Operation / Maintenance Manual 400A thru 1200A Ratings, 480Vac Max Quick Connection Cabinet Installation/Operation/Maintenance Manual Page 1 of 6 WARNING!

More information

Feed Scale Installation & Operator s Instruction Manual

Feed Scale Installation & Operator s Instruction Manual Installation & Operator s Instruction Manual May 004 CTB Inc. Warranty CTB Inc. Warranty CTB Inc. warrants each new C-Collect product manufactured by it to be free from defects in material or workmanship

More information

Li-ion Button Rechargeable Battery Specification

Li-ion Button Rechargeable Battery Specification 7 Customer: Li-ion Button Rechargeable Battery Specification MODEL: LIR2450 Prepared By/Date Checked By/Date Approved By/Date Customer confirmation Date History of revisions Edition Description Prepared

More information

CALIBRATION TEST FIXTURES

CALIBRATION TEST FIXTURES CALIBRATION TEST FIXTURES Model 809B (Surface) Model 819 (Volume) Instruction Manual 7/08 1.0 INTRODUCTION The Model 809B Surface Resistance Calibration Test Fixture and the Model 819 Volume Resistance

More information

Repeated recycling of corrugated containers and its effect on strength properties

Repeated recycling of corrugated containers and its effect on strength properties FOREST PRODUCTS LABORATORY (Madison, Wis, 53705) FOREST SERVICE, U.S. DEPARTMENT OF AGRICULTURE Approved Technical Article Keywords Recycling Corrugating medium Physical properties Mechanical properties

More information

SUMMARY OF TEST RESULTS

SUMMARY OF TEST RESULTS TEST REPORT LAB NO. : (8818)1340064 PAGE : 1 OF 9 APPLICANT : FLASHBAY ELECTRONICS BLGD B & C XI FENG CHENG IND ZONE, NO.2 FUYUAN ROAD HE PING, VILLAGE, FUYONG TOWN, SHENZHEN, CHINA DATE OF SUBMISSION

More information

Full View Flow Indicator

Full View Flow Indicator Full View Flow Indicator Threaded and Flanged Process Connection Installation / Operation / Maintenance Manual P.O. Box 1116 Twinsburg, OH 44087 Phone: 330/405-3040 Fax: 330/405-3070 E-mail: view@ljstar.com

More information

PART NUMBER: F-706RLSS REVOLUTION LIFT: SLING-SEAT OPTION

PART NUMBER: F-706RLSS REVOLUTION LIFT: SLING-SEAT OPTION PART NUMBER: F-706RLSS REVOLUTION LIFT: SLING-SEAT OPTION 500 LB. [227 kg] MAXIMUM CAPACITY MANDATORY LEAVE THIS MANUAL WITH LIFT OWNER - WARNING- IMPORTANT SAFETY INSTRUCTIONS 1. READ AND FOLLOW ALL INSTRUCTIONS.

More information

GM Chevy 1500 Mesh Grille

GM Chevy 1500 Mesh Grille 921701940 GM 2007-13 Chevy 1500 Mesh Grille Thank you for choosing Rough Country for all your lighting needs. Please read instructions before beginning installation. Check the kit hardware against the

More information

q u i e t price list march 2018

q u i e t price list march 2018 q u i e t price list march 201 quiet terms and conditions Sales and Service Policy uidelines detailing the operating policies and procedures of Bernhardt Design are provided in the Sales and Service Policy

More information

Replay Fabric Replacement Top

Replay Fabric Replacement Top Replay Fabric Replacement Top Installation Instructions For: GEO Tracker, Suzuki Sidekick Part Number: 51137 & Vitara 1986-1994 WARNING This product is designed to enhance the appearance of the vehicle

More information

Installation Instructions Studio Makeup Station

Installation Instructions Studio Makeup Station Installation Instructions Studio Makeup Station 30" and 36" Models 5-light 30" Studio Makeup Station 8-light 30" Studio Makeup Station 6-light 36" Studio Makeup Station 9-light 36" Studio Makeup Station

More information

Report No.: STR S. ST/SG/AC.10/11 Rev.5/Amend.2 Section 38.3

Report No.: STR S. ST/SG/AC.10/11 Rev.5/Amend.2 Section 38.3 TEST REORT ST/SG/AC.10/11 Rev.5/Amend.2 Section 38.3 AMENDMENTS TO THE FIFTH REVISED EDITION OF THE RECOMMENDATIONS ON THE TRANSORT OF DANGEROUS GOODS, MANUAL OF TEST AND CRITERIA (Section 38.3: Lithium

More information

TABLE OF CONTENTS. 8.3 Online Sensor Specifications. Series TS (Models TS1, TSP, TSH, TSL,TSF, TSB1, TSB2) According to Electromatic factory procedure

TABLE OF CONTENTS. 8.3 Online Sensor Specifications. Series TS (Models TS1, TSP, TSH, TSL,TSF, TSB1, TSB2) According to Electromatic factory procedure 8.3 Online Sensor Specifications Series TS (Models TS1, TSP, TSH, TSL,TSF, TSB1, TSB2) Calibration: Accuracy: Remainder of range and other calibration material Overload protection Measuring principle Measuring

More information

Modification Record of Product Specification

Modification Record of Product Specification Modification Record of Product Specification No, DSP-14 1303 Product Name SRV Connector Systems Rev. No, Note Reason Place Date Engineer R0 Initial Release DEC 2.19.14 A.M. Page 1/17 PRODUCT SPECIFICATION

More information

Installation Instructions

Installation Instructions by Installation Instructions For: CJ5 (1955-1975) and M38, A1 (1951-1971) Part Number 51405 WARNING This product is designed primarily to enhance the appearance of the vehicle and to shield the occupants

More information

GENUINE PARTS INSTALLATION INSTRUCTIONS

GENUINE PARTS INSTALLATION INSTRUCTIONS GENUINE PARTS INSTALLATION INSTRUCTIONS 1. 2. 3. 4. DESCRIPTION: Accent light Kit APPLICATION: Infiniti JX (2013) PART NUMBER: 999F3 YY000 - Universal Accent Lighting Kit. KIT CONTENTS: Item QTY Description

More information

SPECIFICATION FOR LITHIUM BATTERY. Model: CR2450C

SPECIFICATION FOR LITHIUM BATTERY. Model: CR2450C SPECIFICATION FOR LITHIUM BATTERY Model: CR2450C Approved By Department Name Title Signature/Date (Remarks: The above table shall be filled by customer) POWER GLORY BATTERY TECH (HK) CO., LTD. ROOM E2B,

More information

STAINLESS STEEL FORGED FITTINGS 3000lb 304/304L & 316/316L Forged Stainless Steel Fittings Product Specifications

STAINLESS STEEL FORGED FITTINGS 3000lb 304/304L & 316/316L Forged Stainless Steel Fittings Product Specifications STAINLESS STEEL FORGED FITTINGS 3000lb 304/304L & 316/316L Forged Stainless Steel Fittings Product Specifications Manufactured in ISO9000:2000 Facility Manufactured to ASTM/ASME A182/SA182 Items conform

More information

AGCO. Corn Header Manual d HEADSIGHT.COM

AGCO. Corn Header Manual d HEADSIGHT.COM AGCO Corn Header Manual 09020401d HEADSIGHT.COM 574.546.5022 About Headsight Headsight Contact Info Headsight, Inc. 4845 3B Road Bremen, IN 46506 Phone: 574-546-5022 Fax: 574-546-5760 Email: info@headsight.com

More information

GENUINE PARTS INSTALLATION INSTRUCTIONS

GENUINE PARTS INSTALLATION INSTRUCTIONS GENUINE PARTS INSTALLATION INSTRUCTIONS DESCRIPTION: APPLICATION: PART NUMBER: KIT CONTENTS: Illuminated Kick Plate Maxima (Applicable ONLY to U.S. Market Vehicles with Build Date June 2012 or later) 999G6

More information

1250 LB. CAPACITY MECHANICAL WHEEL DOLLY

1250 LB. CAPACITY MECHANICAL WHEEL DOLLY 1250 LB. CAPACITY MECHANICAL WHEEL DOLLY 67287 SET-UP AND OPERATING INSTRUCTIONS Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result

More information

GC-1. Roof and Gutter De-Icing Control Installation and Operating Instructions FOR EXTERIOR INSTALLATION ONLY

GC-1. Roof and Gutter De-Icing Control Installation and Operating Instructions FOR EXTERIOR INSTALLATION ONLY GC-1 Roof and Gutter De-Icing Control Installation and Operating Instructions FOR EXTERIOR INSTALLATION ONLY GENERAL INFORMATION The GC-1 heating cable controller has been designed and manufactured for

More information

ibusway for Data Center

ibusway for Data Center ibusway for Data Center PBPQOD Plug-In Units with 15 60 A Circuit Breakers for Use On Busway Straight Sections Class 5600 Installation S1B99523 06/2012 Hazard Categories and Special Symbols Read these

More information

Broadband PowerShield. External Battery Pack 20 Ah 12 V Battery. User Manual

Broadband PowerShield. External Battery Pack 20 Ah 12 V Battery. User Manual Broadband PowerShield External Battery Pack 20 Ah 12 V Battery User Manual 990-1660 08/2003 Chapter 1 General Information The APC PowerShield External Battery Pack connects directly to the APC PowerShield

More information

3M Connector System 0.050" x 0.100" Pitch. 3M Tripolarized Wiremount Socket - Series 820 3M 4-Wall, Tripolarized Header - Series 810

3M Connector System 0.050 x 0.100 Pitch. 3M Tripolarized Wiremount Socket - Series 820 3M 4-Wall, Tripolarized Header - Series 810 1 of 9 3M Connector System 0.050" x 0.100" Pitch 3M Tripolarized Wiremount Socket - Series 820 3M 4-Wall, Tripolarized Header - Series 810 Product Specification 78-5110-0074-0 Released: 10-1-10 2 of 9

More information

Universal Bevel Drives Service Manual

Universal Bevel Drives Service Manual Engineering Service Bulletin #SB241202 Universal Bevel Drives Service Manual Cautions Following are some general cautions. All personnel shall use safe and sound practices and take all necessary precautionary

More information

Q21 TRACK SYSTEM FOR NISSAN NP300 NAVARA DUAL CAB 2015+

Q21 TRACK SYSTEM FOR NISSAN NP300 NAVARA DUAL CAB 2015+ FIRST TIME INSTALLATION Please read instructions carefully before installation. Check the contents of the kit. Contact your Prorack dealer if any parts appear missing or damaged. IMPORTANT WARNING! IT

More information

AutoLabeler. User s Guide A (3/02).01

AutoLabeler. User s Guide A (3/02).01 707 AutoLabeler User s Guide 16249000A (3/02).01 Mettler-Toledo, Inc. 2002 No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying

More information