RAYMARK LABELS SCOPE. This Quality Assurance Specification establishes the quality standard for Tyco Raymark Labels

Size: px

Start display at page:

Download "RAYMARK LABELS SCOPE. This Quality Assurance Specification establishes the quality standard for Tyco Raymark Labels"

Job Stevenson
6 years ago
Views:

1 RW 2518 Revision 1 Page 1 of 9 Date Printed 15-Apr-08 Tyco Electronics Cheney Manor, Swindon. UK RW 2518 Revision 1 RAYMARK LABELS SCOPE This Quality Assurance Specification establishes the quality standard for Tyco Raymark Labels Approved Signatories* Quality Assurance Technical Product Management Tyco UK : Gordon White John Swift Rachel Swift * This document is electronically reviewed and approved - therefore no signatures will appear.

2 RW 2518 Revision 1 Page 2 of 9 Date Printed 15-Apr REVISION HISTORY Revision Number AFC Number Date Incorporated By 1 Formerly RK 6648 Revn AFC 307 October 2004 Paul Crofts 2. REQUIREMENTS 2.1 Composition, Appearance and Colour The labels shall comprise a curable coating on a pressure sensitive backing strip carried on a release carrier. The surface of the coating shall be smooth, free from coloured impurities and shall be white. The curable coating shall have no fractured edges. 2.2 Dimensions Height and width shall be in accordance with customer orders. The thickness shall be 0.15 ± 0.04mm exclusive of the release paper. 2.3 Test Requirements The test requirements shall be as specified in Table TEST METHODS 3.1 Preparation of Test Specimens Printing Curing The labels shall be printed using recommended printers and inks. Details of approved printers and inks are available from Tyco The labels shall be cured using the recommended cure methods, details of which are available from Tyco Adhesive Substrates Where specified for the test method cured labels 25mm wide x 175mm long shall be fixed to test plates of Aluminium. The Aluminium plates shall be degreased with Iso propyl alcohol and the labels applied as detailed in FINAT test method FTM1 using a standard 2Kg FINAT roller. (Note: This roller is specified in the FINAT Pressure Sensitive Laminates Suppliers and Users Technical Manual Section 2 (June 1980.)

3 RW 2518 Revision 1 Page 3 of 9 Date Printed 15-Apr-08 TEST METHODS (Cont d) Conditioning Unless otherwise specified the labels fixed to the aluminium test plates shall be conditioned for 24 ± 2 hours at ambient temperature prior to testing to allow the pressure sensitive adhesive to develop optimum strength Number of Test Specimens Unless otherwise specified three specimens shall be used for each test. 3.2 Adherence of Cured Coating The test specimens shall be cured as specified in Clause and then allowed to cool to ambient temperature. Each label shall be folded in half and creased with the coating uppermost. The coating shall be examined for evidence of cracking. 3.3 Adhesive Peel Strength Test specimens shall be prepared as specified in Clause 3.1. In addition to aluminium, test plates of the substrate materials listed in Table 1 shall be prepared as specified in Clause The test method shall be as specified in. For tests at non-ambient conditions the test specimens shall be conditioned at the test temperature for a minimum of 20 minutes and a maximum of 60 minutes Minute Adhesion Test specimens shall be prepared as detailed in Clause 3.1 except that the conditioning period shall be 20 minutes ± 5 minutes prior to testing. 3.5 Print Legibility The test label shall be examined, using normal reading vision, and all patterns, colours and text shall remain unbroken and completely discernible. The labels shall also not show signs of any cracking, flaking, bubbling or lifting from the substrate. 3.6 Print Adherence The labels shall be tested as specified in SAE-AS paragraph

4 RW 2518 Revision 1 Page 4 of 9 Date Printed 15-Apr-08 TEST METHODS (Cont d) 3.7 Dry Abrasion Resistance Test labels shall be prepared as specified in Clauses and The test method shall be as specified in BS 4781.A7 using a Taber Abrader. The wheel shall be a type CS10 with an applied loading, and number of cycles as specified in Table Wet Abrasion Resistance The test method shall be as specified in Clause 3.7 except that the abrading wheels shall be felt type CS5. The wheels shall be totally immersed in the test fluid for 1h ± 10 minutes, removed and blotted dry with absorbent paper towelling and then allowed to dry for 1h ± 10 minutes before the test. The applied load and number of cycles shall be specified in Table Print Permanence The specimens shall be prepared as specified in Clause 3.1 excluding the conditioning period. The test method shall be as specified for resistance to solvents in MIL-STD-202F, method Light Fastness (Xenon Arc) The test specimens shall be prepared as specified in Clause 3.1 excluding the conditioning period. The test method shall be as specified in ASTM G26 Method D. Test for the time specified in Table Humidity Steady State The test specimens shall be prepared as specified in Clause 3.1 and then subjected to the time, temperature and humidity specified in Table Thermal Cycling The test specimens shall be prepared as specified in Clause 3.1 and then subjected to 10 cycles as specified in Table 1: The change over time between each temperature shall not exceed 5 minutes. Note : Samples may experience a colour shade change Thermal Ageing The test specimens shall be prepared as specified in Clause 3.1 and then subjected to the time and temperature specified in Table 1. Note : Samples may experience a colour shade change.

5 RW 2518 Revision 1 Page 5 of 9 Date Printed 15-Apr-08 TEST METHODS (Cont d) 3.14 Low Temperature Flexibility The test label with dimensions of 25mm x 38.5mm shall be applied to a 6mm diameter cable and conditioned as stated in Table 1. After conditioning the cable shall be wrapped round a preconditioned mandrel of 60mm diameter in a close helix Fungus Resistance The test specimens shall be prepared as specified in Clause 3.1. The test method shall be as specified in BS 2011 Part 2.1 J Variant Low Fire Hazard Characteristics In accordance with BR1326(A) Class 5 for use in submarine atmospheres. External Approval by UK Navy Chemical Resistance The test specimens shall be prepared as specified in Clause 3.1 and immersed for the time and temperature in one of the chemicals listed in Table 1 The specimens shall be removed from the chemical, lightly wiped and air dried for 2 hours ± 15 minutes. The test shall be repeated on the remaining specified fluids using fresh samples. Note: In the case of Skydrol the sample shall be lightly wiped not more than two times before drying. To meet the Skydrol immersion requirement the sample must be oven cured for 5 minutes at a temperature of 150 c

6 RW 2518 Revision 1 Page 6 of 9 Date Printed 15-Apr RELATED STANDARDS & issue BS 4781 MIL-STD-202F (Method 215) ASTM G26 BS 2011 Part 2.1J: BR 1326 SAE-AS FINAT Pressure Sensitive Laminates: Suppliers and Users Technical Manual: Test Method Peel Adhesion (180 C) at 300mm per minute Pressure-sensitive adhesive plastics labels for permanent use Test Methods for Electronic and Electrical Components Use: Resistance to Solvents Operating Light-Exposure Apparatus (Xenon-Arc Type) With and Without Water for Exposure of Nonmetallic Materials Environmental testing. Tests. Test J and guidance. Mould growth Materials Toxicity Guide (Restricted) Marking of the Electrical Insulating Materials. Subsequent amendments to, or revisions of, any of the above publications apply to this standard only when incorporated in it by updating or revision. 5. Sampling Testing frequency shall be Production Routine or Qualification. Production routine tests shall be carried out on every coated roll of sheet material and shall consist of Print Legibility and Print Permanency using only the Iso propyl alcohol/mineral spirit mixture. A batch of sheet material is defined as that quantity of material coated at any one time produced as a continuous roll. Qualification shall be carried out to the requirements of the Design Authority. 6 Preparation for Delivery 6.1 Packaging 6.2 Marking Raymark shall be supplied in vacuum sealed foil bags with desiccatant and overboxed. Each package shall be labelled showing the description, quantity, size, batch number, Use Before date and "Manufactured Date". 6.3 Shelf Life The shelf life is 18 months from the manufacturing date, when the following conditions have been met. Store unopened material below 35 C (95 F). Once opened, store material below 25 C (77 F) and below 80% RH. Reseal in original packaging and use within 6 months, but do not use after the use by date.

7 RW 2518 Revision 1 Page 7 of 9 Date Printed 15-Apr-08 TABLE 1 Test Requirements Test Test Method Test Requirements Dimensions: Thickness Clause ± 0.04 mm Adherence of Cured Coating Clause 3.2 No Cracking Adhesive Peel Strength to: Aluminium Stainless Steel Alkyd Painted Surface Polyurethane Painted Surface Acrylic Painted Surface GRP F4 ABS Phenolic PVC 20 minute Adhesion Clause 3.4 Adhesive Peel Strength (non-ambient temperature) +85 ± 2 C 7 N/25mm minimum +110 ± 2 C 3 N/25mm minimum Print Legibility Clause 3.5 Dry Abrasion Resistance (500 grms 500 cycles) Wet Abrasion Resistance (250 grms 500 cycles) 20% IPA + 80% Water ASTM No 1 Oil IRM 902 Oil Detergent - 2% Teepol with water Clause 3.7 BS 4781.A7 Clause 3.8 BS 4781.A7

8 RW 2518 Revision 1 Page 8 of 9 Date Printed 15-Apr-08 TABLE 1 Test Requirements (Cont d) Test Test Method Test Requirements Print Permanency Clause 3.9 MIL-STD-202F Method 215 Light Fastness (Xenon Arc) (Test Duration 250 hours) Clause 3.10 Humidity Steady State (168 ± 2 hrs at 40 ± 2 C, 95% RH) Clause 3.11 Thermal Cycling One cycle consists of the following: 4 h ± 15 m at -55 ± 3 C 4 h ± 15 m at 25 ± 5 C 4 h ± 15 m at 150 ± 3 C 4 h ± 15 m at 25 ± 5 C Clause 3.12 No separation of the label from the test plate Thermal Ageing (168 ± 2h at 150 ± 3 C) Clause 3.13 No separation of the label from the test plate - Print Adherence Clause 3.6 No separation of the label from the test plate Low Temperature Flexibility (4h ± 15m at -40 ± 2 C) Clause 3.14 Fungus Resistance Clause 3.15 BS 2011 Part 2.1 J No cracking of the labels shall be seen when examined under normal reading vision. The print shall remain legible. Surface creasing shall be ignored 1 maximum Low Fire Hazard Characteristics BR 1326 (A) As defined by UK Navy (restricted)

9 RW 2518 Revision 1 Page 9 of 9 Date Printed 15-Apr-08 Chemical Resistance Test (24 ± 1h immersion at 23 ± 2 C) White Spirits Iso propyl alcohol Ethylene Glycol Hydraulic Fluid to H-515 Diesel Fuel TABLE 1 Test Requirements (Cont d) Test Test Method Test Requirements Clause Print Adherence Clause 3.6 Chemical Resistance Test (24 ± 1h immersion at 50 ± 2 C) Lubricating Oil to O-149 Salt Water (3.5%) Clause N/25mm minimum - Print Adherence Clause 3.6 Chemical Resistance Test (1hour immersion at 23 ± 2 C) Skydrol 500B4 1 (Samples must be oven cured) - Print Legibility - Print Adherence Chemical Resistance Test (2h ± 15m immersion at 100 ± 2 C) Water Clause 3.17 Clause 3.5 Clause 3.6 Clause N/25mm minimum 10 N/25mm minimum - Print Adherence Clause N/25mm minimum In line with a policy of continual product development, Tyco reserves the right to make changes in construction, materials and dimensions without further notice. You are advised, therefore, to contact Tyco UK Ltd., should it be necessary to ensure that this document is the latest issue. 1 Skydrol is a trade mark of Monsanto.

TMS CABLE MARKERS CM-SCE & CM-SCE-TP. Tie on Identification Product

Page 1 of 12 October 2015 Specification RW-2513 Document Number: 108-121016 TMS CABLE MARKERS CM-SCE & CM-SCE-TP Including HL cable marker range Tie on Identification Product SCOPE This quality assurance