Serving the Chemical Industry

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "Serving the Chemical Industry"

Transcription

1 Serving the Chemical Industry

2 Hello, I am delighted to introduce you to S. G. & P., Inc. This company is a family owned corporation founded in 1968 by my father, Rex Epps. Upon retiring as a scientific glassblower, he began supplying fabricated plastic and scientific glass products to the local petrochemical industry in Brazoria County, Texas. His goal, then, and my goal, now, remain the same: Supply quality products and keep the customers satisfied. We are a continually growing company with enthusiastic employees who are dedicated to fulfilling customer needs. Individual attention is given to all jobs, whether large or small. At S. G. & P., we fabricate custom thermoplastic and scientific glassware products. We have a diverse customer base including the chemical, petrochemical, environmental, petroleum, transportation, research, education, medical and recreation industries. Today we supply customers throughout the United States and abroad. If plastics or glassware can fill the need, then we can do the job. Sincerely, Joe Epps Owner

3 General Contents Page Ordering Information... Thermoplastics... Tower Internals... Vacuum Forming... Flange Spacers... Material Properties... Glassware

4 We are distributors for the following manufacturers: Eslon Thermoplastics PVC / CPVC pipe & fittings Ordering Information Call toll free or Ph: Fx: For your convenience, we accept Visa, Mastercard and American Express Spears Manufacturing PVC / CPVC fittings Compression Polymers Group HDPE, Polypropylene, HYLAR PVDF, and CPG Seaboard sheet Vycom PVC and CPVC sheet Westlake Plastics Company Kynar PVDF sheet Trademarks S. G. & P., Inc. P. O. Box 518 Freeport, Texas N. Avenue G Freeport, Texas 7751 Visit Us On-line Corzan CPVC is a trademark of the B.F. Goodrich Company CPG Seaboard is a trademark of the Compression Polymers Group HYLAR is a registered trademark of Ausimont U.S.A. Kynar is a registered trademark of Elf Atochem North America Lexan is a registered trademark of GE Plastics Lucite is a registered trademark of ICI Acrylics Plexiglas is a registered trademark of the Rohm & Haas Co. Pyrex is a registered trademark of the Corning Corporation Teflon is a registered trademark of E. I. DuPont & Co. Ph: Ph: Fx: Material Safety Data Sheets are available upon request on any thermoplastic or glass that we carry.

5 THERMOPLASTIC Acrylic Recognized under the brand names of Plexiglas and Lucite, acrylic is an optically clear, transparent material having outstanding weatherability, high impact resistance, good chemical resistance and is easily thermoformed and fabricated. Acrylic is less than half the weight of glass and is suitable in a wide range of applications. Some of the most requested items that we routinely fabricate out of acrylic include: fume hoods, dry boxes, draft shields, instrument covers and enclosures, safety shields, battery covers, flanged spools, transparent tanks and sight glasses. diameter acrylic tank, with PVC stand Polycarbonate Lexan polycarbonate sheet is virtually unbreakable transparent plastic, excellent in applications where safety and security are important. Polycarbonate can be used in many of the same applications as acrylic when impact strength is a factor. Assorted acrylic flanged spools 1 diameter acrylic flanged column with PVC flanged connections Smoked acrylic instrument enclosure with glove ports Large acrylic tank with metal support frame Call Toll Free 3

6 THERMOPLASTIC PVC (Polyvinyl Chloride) PVC sheet is a normal impact, high corrosion resistant material, ideally suited where chemical resistance is necessary. It s high strength-to-weight ratio, cost efficiency, ease of fabrication and eco-balance make it an excellent choice. PVC is easily machined and weldable. We routinely use PVC sheet to fabricate various types of enclosures and covers, cabinets, fume hoods and tanks, and in conjunction with PVC pipe and fittings. PVC pipe and fittings give excellent, maintenance free performance over long periods of time and have outstanding chemical resistance to nearly all acids, alkalis, alcohols, halogens and many other corrosive materials. It is weather resistant and non-toxic. Acrylic spools with custom fabricated PVC flanges Corzan CPVC (Chlorinated Polyvinyl Chloride) Corzan CPVC sheet is a high heat, corrosion resistant material with properties similar to PVC, but because of its excellent corrosion resistance at elevated temperatures, it is ideally suited for self-supporting constructions where high temperatures are a concern. PVC vat with sliding covers in a metal frame We have extensive experience with CPVC as a construction material, including tower internals and many other process applications. Corzan CPVC pipe and fittings gain advantage over PVC by retaining its mechanical strength at high temperatures. PVC cabinets Motionless mixing pipe insert fabricated from CPVC sheet Acrylic glove box with transfer chamber Call Toll Free

7 THERMOPLASTIC HDPE (High Density Polyethylene) HDPE is an economical, high impact, lightweight thermoplastic which characteristics include excellent chemical resistance, high tensile strength, resilience, stress crack and abrasion resistance. It is easily machined and requires welded or mechanical style of construction. We use HDPE to fabricate many items for the laboratory and plant processes, including tanks, countertops, catch pans, fume hoods and lab ware carriers. It meets FDA and USDA requirements. Radial liquid distribution unit fabricated from polypropylene sheet, CPVC pipe and fittings and enclosed in a custom fitted stand fabricated from polyethylene pipe and sheet HDPE lab countertop with removable sinks UHMWPE (Ultra High Molecular Weight Polyethylene) UHMWPE has extremely high abrasion resistance when compared to other thermoplastics. It also has exceptional impact resistance, even at cryogenic temperatures, is chemical resistant and is selflubricating. It also meets FDA and USDA requirements. Polyethylene rotary trickle distributor, used in a bio-pond application as an alternate to the aluminum one which had failed in service HDPE tank with spigot and polypropylene strainer basket Call Toll Free 5

8 THERMOPLASTIC Some common applications for UHMWPE are chutes, conveyors, wear plates, bushings and rollers. Porous HDPE Porous HDPE is a free-sintered material that produces porous plastic products with excellent filtration efficiency of fine solid particulate combined with excellent flowability of liquids and gases. Controlled particle size distribution and a precise temperature cycle are used to produce a wide range of interconnected cell structures and specific pore size ranges. These pore structures are designed and controlled to function in a variety of applications such as filtering, wicking, diffusing or venting gases, and sound muffling. Porous plastics retain most of the physical properties of their solid counterparts, but also offer a unique set of properties. The unique tortuous filtration path of the material produces high filtration efficiency combining the properties of both surface and depth filters. Porous plastics have excellent resiliency, high physical strength and light weight providing a rugged, easily handled part. Filtration efficiencies of 99.8% can be achieved. Porous HDPE filter element fabricated from porous HDPE tube and HDPE rod for the threaded end and end caps, using butt fusion technique Porous HDPE filter plate, ten feet long with solid HDPE sheet welded on as a frame with o-ring grooves routed on the face of the frame We can fabricate filtration products from porous HDPE sheet and tube to your specifications. CPG Seaboard CPG Seaboard CPG Seaboard is a marine grade high density polyethylene sheet manufactured from the highest density HDPE resin, ensuring that it will be the most rigid and dimensionally stable product available. Pre-production treatment provides every sheet with enhanced ability to resist the harmful effects of salt water, moisture and direct sunlight (UV degradation). It has a slight textured surface which minimizes the appearance of scratches. 6 Call Toll Free

9 THERMOPLASTIC CPG Seaboard is fabricated and welded using the same techniques as used with HDPE. It also meets all regulations of the FDA. Polypropylene Polypropylene is an economical, lightweight thermoplastic that offers high corrosion resistance, abrasion and impact resistance. It exhibits tensile strength and stiffness at elevated temperatures superior to HDPE. Polypropylene carries USDA and FDA approval and is stain resistant. It is machined easily and requires welded or mechanical style of construction. Countertop for cabinet on a bar-b-que pit trailer, fabricated from CPG Seaboard We utilize polypropylene in the fabrication of flange spacers, catch pans, countertops and various other applications. TEFLON PTFE (Polytetrafluoruethylene) Teflon is used to produce products which have service temperature capabilities exceeding all other thermoplastics. It has a combination of chemical, electrical, mechanical and thermal properties unmatched by any other material, and it is the most chemically inert of any material known. Almost nothing sticks to Teflon and it is the most heat resistant of organic materials. It is unaffected by weathering and is an excellent electrical insulator. We use Teflon to fabricate flange spacers, gaskets and numerous machined parts. PVDF (Polyvinylidene Fluoride) PVDF, known under the brand names of Kynar and Hylar, is a high performance thermoplastic that combines great mechanical strength and high abrasion resistance with a broad temperature range. It is highly resistant to most environmental conditions and corrosive chemicals. We routinely use PVDF in the fabrication of flange spacers, tower internals and wherever superior thermoplastic characteristics are necessary. Call Toll Free 7

10 TOWER INTERNALS Corzan CPVC weir trough distributor with elevated parting box, utilizing triangular weirs for flow distribution. Good for fouling services and turndown capabilities. Corzan CPVC chimney tray for liquid collection and draw-off. Contains multiple vapor risers for equal vapor distribution. PVDF liquid redistributor with vapor risers and angled drip tubes. Sectional construction incorporates lateral cross flow tubes for liquid transfer. MTS-109 PVC distributor, fabricated under exclusive license with Nutter Engineering from Dow Chemical. Sectional design minimizes out of level effects. Angle drop tubes provide flexibility in turndown situation. PVDF eight-foot diameter, liquid distributor designed to rest between tower body flanges. Distributor is fabricated with slotted weir down pipes and wipe vapor passages near the flanges. 8 Call Toll Free

11 TOWER INTERNALS PVDF gas injection type packing support, spanning eight feet in diameter. High open area design, while not compromising its rigidity. PVDF pipe-arm (ladder-arm) type distributor. This type distributor can be fabricated for use in liquid or vapor applications. It can also be fabricated with fitted spray nozzles. PVDF eight-foot diameter, single vapor riser liquid collector, with welded PVC wall wiper for total liquid drain-off. Designed for critical service requiring zero liquid leakage. Collector was piece welded inside the tower using S.G. & P. field services. PVDF 8 diameter, gas injection packing support plate with high open area. Support plate utilizes PVDF pipe with encapsulate FRP rod for added rigidity. PDVF three-foot diameter, gas injection type packing support designed to fit between tower body flanges and also designed for a high open area. Call Toll Free 9

12 VACUUM FORMING Vacuum formed domes for bus shelters fabricated from high impact acrylic. CVPC liner vacuum formed in two halves incorporating ribs in the mold for rigidity. The pieces are then welded together and overlaid in fiberglass. 10 Call Toll Free

13 THERMOPLASTIC FLANGE SPACERS GENERAL INFORMATION Material selection in this catalog is consistent with that of plastic lined pipe. Other materials available. All materials listed are in stock in thicknesses ranging from 1/ thru. Other thicknesses available. All PVDF and PP spacers are stamped as such for ease for identification. All dimensional information in this catalog is based on standards. Table of Contents Thermoplastic Flange Spacers Page Dimensional Information Blind Ring Standard Ring Blind Full Face Standard Full Face Tapered Bore Ring Orifice Ring Tapered Bore Full Face Orifice Full Face Any spacer can be customized to your specifications. How to Order ORDER SPACERS BY PART NUMBER OR DESCRIPTION. We offer custom spacers at competitive prices and prompt service. Call Toll Free 11

14 THERMOPLASTIC FLANGE SPACERS Standard Ring Spacer Standard Full Face Spacer Blind Ring Spacer Blind Full Face Spacer 1 Call Toll Free

15 THERMOPLASTIC FLANGE SPACERS Tap Information for Orifice Spacers Orifice Ring Spacer Tap 1/ 3/8 1/ 3/ 1 1 1/ 1 1/ Min. Dimension C 1 1 1/8 1 1/ 1 1/ 1 3/ 1/ 1/ Orifice Full Face Spacer Dimensional Information for Class 15 and 150 Spacers Ring and full face spacers (standard, blind and orifice) Ring B Full Bolt Holes Bolt A PP Face Circle PVDF PTFE D No. E 1 5/8 11/16 5/3 1/ 5/8 3 1/8 1 1/ 3 3/8 1 5/16 1 5/16 5 5/8 3 7/8 1/8 1 3/ 1 3/ 6 3/ 3/ 1/ 7/8 3/3-7 3/ 5 1/ 3 5 3/8 11/16 3/3 7 1/ 3/ 6 6 7/8 3 5/8 3 11/ / 7 1/ 6 8 3/ 5 9/16 5 3/ /8 9 1/ / 7 5/8 13 1/ 8 7/8 11 3/ /8 9 11/ / / Note: C dimension -- thickness to be specified. Call Toll Free 13

16 THERMOPLASTIC FLANGE SPACERS Reducing Ring Spacer Reducing Full Face Spacer Dimensional Information for Class 15 and 150 Reducing Spacers Ring and full face spacers A B Full Bolt Holes Bolt PP Face Circle PVDF PTFE D No. E 1 1/ x 1 3 3/8 11/16 5/3 5 5/8 3 7/8 x 1 1/8 11/16 5/3 6 3/ 3/ x 1 1/ 1/8 1 5/16 1 5/16 6 3/ 3/ 1/ x 1 1/ 7/8 1 5/16 1 5/16 7 3/ 5 1/ 1/ x 7/8 1 3/ 1 3/ 7 3/ 5 1/ 3 x 5 3/8 1 3/ 1 3/ 7 1/ 3/ 6 3 x 1/ 5 3/8 3/3-7 1/ 3/ 6 x 1/ 6 7/8 3/ / 7 1/ x 3 6 7/8 11/16 3/ / 7 1/ 6 x 8 3/ 3 5/8 3 11/ /8 9 1/ 8 x /16 5 3/3 13 1/ 8 7/8 11 3/ Note: C dimension -- thickness to be specified. (1/ is typical) 1 Call Toll Free

17 THERMOPLASTIC FLANGE SPACERS Tapered Bore Ring Spacer Dimensional Information for Tapered Bore Ring Spacers A B C D / Full face tapered bore spacers (not shown) also available. Note: Tapered bore spacers are beveled for use with a butterfly valve. Call Toll Free 15

18 BLIND RING SPACERS POLYPROPYLENE 1/ 3/ Thickness 1 1 1/ 1 1/ 1 # 1111 # 111 # 1113 # 111 # 1115 # / # 111 # 11 # 113 # 11 # 115 # 116 # 1131 # 113 # 1133 # 113 # 1135 # # 111 # 11 # 113 # 11 # 115 # 116 # 1151 # 115 # 1153 # 115 # 1155 # # 1161 # 116 # 1163 # 116 # 1165 # # 1171 # 117 # 1173 # 117 # 1175 # # 1181 # 118 # 1183 # 118 # 1185 # # 1191 # 119 # 1193 # 119 # 1195 # Call Toll Free

19 BLIND RING SPACERS PVDF (KYNAR ) 1/ 3/ Thickness 1 1 1/ 1 1/ 1 # 111 # 11 # 113 # 11 # 115 # / # 11 # 1 # 13 # 1 # 15 # 16 # 131 # 13 # 133 # 13 # 135 # # 11 # 1 # 13 # 1 # 15 # 16 # 151 # 15 # 153 # 15 # 155 # # 161 # 16 # 163 # 16 # 165 # # 171 # 17 # 173 # 17 # 175 # # 181 # 18 # 183 # 18 # 185 # # 191 # 19 # 193 # 19 # 195 # 196 TEFLON 1/ 3/ Thickness 1 1 1/ 1 1/ 1 # 1311 # 131 # 1313 # 131 # 1315 # / # 131 # 13 # 133 # 13 # 135 # 136 # 1331 # 133 # 1333 # 133 # 1335 # # 131 # 13 # 133 # 13 # 135 # 136 # 1351 # 135 # 1353 # 135 # 1355 # # 1361 # 136 # 1363 # 136 # 1365 # # 1371 # 137 # 1373 # 137 # 1375 # # 1381 # 138 # 1383 # 138 # 1385 # # 1391 # 139 # 1393 # 139 # 1395 # 1396 Call Toll Free 17

20 STANDARD RING SPACERS POLYPROPYLENE 1/ 3/ Thickness 1 1 1/ 1 1/ 1 # 111 # 11 # 113 # 11 # 115 # / # 11 # 1 # 13 # 1 # 15 # 16 # 131 # 13 # 133 # 13 # 135 # # 11 # 1 # 13 # 1 # 15 # 16 # 151 # 15 # 153 # 15 # 155 # # 161 # 16 # 163 # 16 # 165 # # 171 # 17 # 173 # 17 # 175 # # 181 # 18 # 183 # 18 # 185 # # 191 # 19 # 193 # 19 # 195 # Call Toll Free

21 STANDARD RING SPACERS PVDF (KYNAR ) 1/ 3/ Thickness 1 1 1/ 1 1/ 1 # 11 # 1 # 13 # 1 # 15 # / # 1 # # 3 # # 5 # 6 # 31 # 3 # 33 # 3 # 35 # 36 3 # 1 # # 3 # # 5 # 6 # 51 # 5 # 53 # 5 # 55 # 56 6 # 61 # 6 # 63 # 6 # 65 # 66 8 # 71 # 7 # 73 # 7 # 75 # # 81 # 8 # 83 # 8 # 85 # 86 1 # 91 # 9 # 93 # 9 # 95 # 96 TEFLON 1/ 3/ Thickness 1 1 1/ 1 1/ 1 # 311 # 31 # 313 # 31 # 315 # / # 31 # 3 # 33 # 3 # 35 # 36 # 331 # 33 # 333 # 33 # 335 # # 31 # 3 # 33 # 3 # 35 # 36 # 351 # 35 # 353 # 35 # 355 # # 361 # 36 # 363 # 36 # 365 # # 371 # 37 # 373 # 37 # 375 # # 381 # 38 # 383 # 38 # 385 # # 391 # 39 # 393 # 39 # 395 # 396 Call Toll Free 19

22 BLIND FULL FACE SPACERS POLYPROPYLENE 1/ 3/ Thickness 1 1 1/ 1 1/ 1 # 3111 # 311 # 3113 # 311 # 3115 # / # 311 # 31 # 313 # 31 # 315 # 316 # 3131 # 313 # 3133 # 313 # 3135 # # 311 # 31 # 313 # 31 # 315 # 316 # 3151 # 315 # 3153 # 315 # 3155 # # 3161 # 316 # 3163 # 316 # 3165 # # 3171 # 317 # 3173 # 317 # 3175 # # 3181 # 318 # 3183 # 318 # 3185 # # 3191 # 319 # 3193 # 319 # 3195 # Call Toll Free

23 BLIND FULL FACE SPACERS PVDF (KYNAR ) 1/ 3/ Thickness 1 1 1/ 1 1/ 1 # 311 # 31 # 313 # 31 # 315 # / # 31 # 3 # 33 # 3 # 35 # 36 # 331 # 33 # 333 # 33 # 335 # # 31 # 3 # 33 # 3 # 35 # 36 # 351 # 35 # 353 # 35 # 355 # # 361 # 36 # 363 # 36 # 365 # # 371 # 37 # 373 # 37 # 375 # # 381 # 38 # 383 # 38 # 385 # # 391 # 39 # 393 # 39 # 395 # 396 TEFLON 1/ 3/ Thickness 1 1 1/ 1 1/ 1 # 3311 # 331 # 3313 # 331 # 3315 # / # 331 # 33 # 333 # 33 # 335 # 336 # 3331 # 333 # 3333 # 333 # 3335 # # 331 # 33 # 333 # 33 # 335 # 336 # 3351 # 335 # 3353 # 335 # 3355 # # 3361 # 336 # 3363 # 336 # 3365 # # 3371 # 337 # 3373 # 337 # 3375 # # 3381 # 338 # 3383 # 338 # 3385 # # 3391 # 339 # 3393 # 339 # 3395 # 3396 Call Toll Free 1

24 STANDARD FULL FACE SPACERS POLYPROPYLENE 1/ 3/ Thickness 1 1 1/ 1 1/ 1 # 111 # 11 # 113 # 11 # 115 # / # 11 # 1 # 13 # 1 # 15 # 16 # 131 # 13 # 133 # 13 # 135 # # 11 # 1 # 13 # 1 # 15 # 16 # 151 # 15 # 153 # 15 # 155 # # 161 # 16 # 163 # 16 # 165 # # 171 # 17 # 173 # 17 # 175 # # 181 # 18 # 183 # 18 # 185 # # 191 # 19 # 193 # 19 # 195 # 196 Call Toll Free

25 STANDARD FULL FACE SPACERS PVDF (KYNAR ) 1/ 3/ Thickness 1 1 1/ 1 1/ 1 # 11 # 1 # 13 # 1 # 15 # / # 1 # # 3 # # 5 # 6 # 31 # 3 # 33 # 3 # 35 # 36 3 # 1 # # 3 # # 5 # 6 # 51 # 5 # 53 # 5 # 55 # 56 6 # 61 # 6 # 63 # 6 # 65 # 66 8 # 71 # 7 # 73 # 7 # 75 # # 81 # 8 # 83 # 8 # 85 # 86 1 # 91 # 9 # 93 # 9 # 95 # 96 TEFLON 1/ 3/ Thickness 1 1 1/ 1 1/ 1 # 311 # 31 # 313 # 31 # 315 # / # 31 # 3 # 33 # 3 # 35 # 36 # 331 # 33 # 333 # 33 # 335 # # 31 # 3 # 33 # 3 # 35 # 36 # 351 # 35 # 353 # 35 # 355 # # 361 # 36 # 363 # 36 # 365 # # 371 # 37 # 373 # 37 # 375 # # 381 # 38 # 383 # 38 # 385 # # 391 # 39 # 393 # 39 # 395 # 396 Call Toll Free 3

26 TAPERED BORE RING SPACERS POLYPROPYLENE 1/ 3/ Thickness 1 1 1/ 1 1/ 1 # 5111 # 511 # 5113 # 511 # 5115 # / # 511 # 51 # 513 # 51 # 515 # 516 # 5131 # 513 # 5133 # 513 # 5135 # # 511 # 51 # 513 # 51 # 515 # 516 # 5151 # 515 # 5153 # 515 # 5155 # # 5161 # 516 # 5163 # 516 # 5165 # # 5171 # 517 # 5173 # 517 # 5175 # # 5181 # 518 # 5183 # 518 # 5185 # # 5191 # 519 # 5193 # 519 # 5195 # 5196 Call Toll Free

27 TAPERED BORE RING SPACERS PVDF (KYNAR ) 1/ 3/ Thickness 1 1 1/ 1 1/ 1 # 511 # 51 # 513 # 51 # 515 # / # 51 # 5 # 53 # 5 # 55 # 56 # 531 # 53 # 533 # 53 # 535 # # 51 # 5 # 53 # 5 # 55 # 56 # 551 # 55 # 553 # 55 # 555 # # 561 # 56 # 563 # 56 # 565 # # 571 # 57 # 573 # 57 # 575 # # 581 # 58 # 583 # 58 # 585 # # 591 # 59 # 593 # 59 # 595 # 596 TEFLON 1/ 3/ Thickness 1 1 1/ 1 1/ 1 # 5311 # 531 # 5313 # 531 # 5315 # / # 531 # 53 # 533 # 53 # 535 # 536 # 5331 # 533 # 5333 # 533 # 5335 # # 531 # 53 # 533 # 53 # 535 # 536 # 5351 # 535 # 5353 # 535 # 5355 # # 5361 # 536 # 5363 # 536 # 5365 # # 5371 # 537 # 5373 # 537 # 5375 # # 5381 # 538 # 5383 # 538 # 5385 # # 5391 # 539 # 5393 # 539 # 5395 # 5396 Call Toll Free 5

28 ORIFICE RING SPACERS POLYPROPYLENE 1/ 3/ Thickness 1 1 1/ 1 1/ 1 # 7111 # 711 # 7113 # 711 # 7115 # / # 711 # 71 # 713 # 71 # 715 # 716 # 7131 # 713 # 7133 # 713 # 7135 # # 711 # 71 # 713 # 71 # 715 # 716 # 7151 # 715 # 7153 # 715 # 7155 # # 7161 # 716 # 7163 # 716 # 7165 # # 7171 # 717 # 7173 # 717 # 7175 # # 7181 # 718 # 7183 # 718 # 7185 # # 7191 # 719 # 7193 # 719 # 7195 # Call Toll Free

29 ORIFICE RING SPACERS PVDF (KYNAR ) 1/ 3/ Thickness 1 1 1/ 1 1/ 1 # 711 # 71 # 713 # 71 # 715 # / # 71 # 7 # 73 # 7 # 75 # 76 # 731 # 73 # 733 # 73 # 735 # # 71 # 7 # 73 # 7 # 75 # 76 # 751 # 75 # 753 # 75 # 755 # # 761 # 76 # 763 # 76 # 765 # # 771 # 77 # 773 # 77 # 775 # # 781 # 78 # 783 # 78 # 785 # # 791 # 79 # 793 # 79 # 795 # 796 TEFLON 1/ 3/ Thickness 1 1 1/ 1 1/ 1 # 7311 # 731 # 7313 # 731 # 7315 # / # 731 # 73 # 733 # 73 # 735 # 736 # 7331 # 733 # 7333 # 733 # 7335 # # 731 # 73 # 733 # 73 # 735 # 736 # 7351 # 735 # 7353 # 735 # 7355 # # 7361 # 736 # 7363 # 736 # 7365 # # 7371 # 737 # 7373 # 737 # 7375 # # 7381 # 738 # 7383 # 738 # 7385 # # 7391 # 739 # 7393 # 739 # 7395 # 7396 Call Toll Free 7

30 TAPERED BORE FULL FACE SPACERS POLYPROPYLENE 1/ 3/ Thickness 1 1 1/ 1 1/ 1 # 6111 # 611 # 6113 # 611 # 6115 # / # 611 # 61 # 613 # 61 # 615 # 616 # 6131 # 613 # 6133 # 613 # 6135 # # 611 # 61 # 613 # 61 # 615 # 616 # 6151 # 615 # 6153 # 615 # 6155 # # 6161 # 616 # 6163 # 616 # 6165 # # 6171 # 617 # 6173 # 617 # 6175 # # 6181 # 618 # 6183 # 618 # 6185 # # 6191 # 619 # 6193 # 619 # 6195 # Call Toll Free

31 TAPERED BORE FULL FACE SPACERS PVDF (KYNAR ) 1/ 3/ Thickness 1 1 1/ 1 1/ 1 # 611 # 61 # 613 # 61 # 615 # / # 61 # 6 # 63 # 6 # 65 # 66 # 631 # 63 # 633 # 63 # 635 # # 61 # 6 # 63 # 6 # 65 # 66 # 651 # 65 # 653 # 65 # 655 # # 661 # 66 # 663 # 66 # 665 # # 671 # 67 # 673 # 67 # 675 # # 681 # 68 # 683 # 68 # 685 # # 691 # 69 # 693 # 69 # 695 # 696 TEFLON 1/ 3/ Thickness 1 1 1/ 1 1/ 1 # 6311 # 631 # 6313 # 631 # 6315 # / # 631 # 63 # 633 # 63 # 635 # 636 # 6331 # 633 # 6333 # 633 # 6335 # # 631 # 63 # 633 # 63 # 635 # 636 # 6351 # 635 # 6353 # 635 # 6355 # # 6361 # 636 # 6363 # 636 # 6365 # # 6371 # 637 # 6373 # 637 # 6375 # # 6381 # 638 # 6383 # 638 # 6385 # # 6391 # 639 # 6393 # 639 # 6395 # 6396 Call Toll Free 9

32 ORIFICE FULL FACE SPACERS POLYPROPYLENE 1/ 3/ Thickness 1 1 1/ 1 1/ 1 # 8111 # 811 # 8113 # 811 # 8115 # / # 811 # 81 # 813 # 81 # 815 # 816 # 8131 # 813 # 8133 # 813 # 8135 # # 811 # 81 # 813 # 81 # 815 # 816 # 8151 # 815 # 8153 # 815 # 8155 # # 8161 # 816 # 8163 # 816 # 8165 # # 8171 # 817 # 8173 # 817 # 8175 # # 8181 # 818 # 8183 # 818 # 8185 # # 8191 # 819 # 8193 # 819 # 8195 # Call Toll Free

33 ORIFICE FULL FACE SPACERS PVDF (KYNAR ) 1/ =3/ Thickness 1 1 1/ 1 1/ 1 # 811 # 81 # 813 # 81 # 815 # / # 81 # 8 # 83 # 8 # 85 # 86 # 831 # 83 # 833 # 83 # 835 # # 81 # 8 # 83 # 8 # 85 # 86 # 851 # 85 # 853 # 85 # 855 # # 861 # 86 # 863 # 86 # 865 # # 871 # 87 # 873 # 87 # 875 # # 881 # 88 # 883 # 88 # 885 # # 891 # 89 # 893 # 89 # 895 # 896 TEFLON 1/ 3/ Thickness 1 1 1/ 1 1/ 1 # 8311 # 831 # 8313 # 831 # 8315 # / # 831 # 83 # 833 # 83 # 835 # 836 # 8331 # 833 # 8333 # 833 # 8335 # # 831 # 83 # 833 # 83 # 835 # 836 # 8351 # 835 # 8353 # 835 # 8355 # # 8361 # 836 # 8363 # 836 # 8365 # # 8371 # 837 # 8373 # 837 # 8375 # # 8381 # 838 # 8383 # 838 # 8385 # # 8391 # 839 # 8393 # 839 # 8395 # 8396 Call Toll Free 31

34 MATERIAL PROPERTIES Typical Physical Properties of Lucite Cast Acrylic Sheet* 1 Property Method Value Optical Mechanical Thermal Electrical Miscellaneous Combustibility* Thickness, Nominal, Inch Specific Gravity Refractive Index Light Transmittance Parallel Total Haze Spectral transmission 90 to 330 nm, 0.5 sheet, max, percent Tensile Strength Rupture Modulus of Elasticity Elongation at Rupture Flexural Strength Rupture Modulus of Elasticity Compressive Strength Yield Modulus of Elasticity Shear Strength Impact Strength Charpy Unnotched Rockwell Hardness Hot Forming Temperature Heat Distortion Temperature 3.6 F ( C)/Min-6 psi Coefficient of Thermal Expansion (ave. value) Maximum Recommended Continuous Service Temperature Coefficient of Thermal Conductivity Shrinkage, max. percent Specific heat Surface Resistivity, 8 F (8 C), 75% RH Volume Resistivity Dielectric Strength, Short Time Test Dielectric Constant 60 cycles 10 3 cycles 10 6 cycles Power Factor 60 cycles 10 3 cycles 10 6 cycles Arc Resistance Water Absorption (Wt. Gain on Immersion for hrs.) Soluble Matter Lost after Immersion Odor Taste Smoke Density Rating UL Horizontal Burning Rate ASTM D79 ASTM D5 ASTM D1003 ASTM DU-79 Beckman ASTM D638 ASTM D790 ASTM D695 ASTM D73 ASTM D56 ASTM D785 ASTM D68 ASTM D696 ASTM D57 ASTM D57 ASTM D19 ASTM D150 ASTM D150 ASTM D95 ASTM D570 ASTM D570 ASTM D83 UL % 9% 1% 5% 11M psi (760 kg/cm ) 56M psi (3 x 10 kg/cm ).1% 1.8M psi (1,050 kg/cm ) 50M psi (3 x 10 kg/cm ) 1.8M psi (1,60 kg/cm ) 79M psi (3 x 10 kg/cm ) 8.M psi (630 kg/cm ) 5.0 ft. lb./in. (0.8 kg/cm ) M F ( C) 00 F (93 C)* 3.9 x 10-5 in./in./ F (7 x 10-5 cm/cm/ C) 180 F (8 C) 1.5 Btu in./ft hr. F (5 x 10 - Cal/sec.cm C/cm).5% 0.35 Btu/lb. F (0.35 Cal/gr C) >10 1 ohm x ohm/mil (10 15 ohm/cm) 0. kv/mil (0 kv/mm) No Tracking 0.3% 0.0% None None 13.5% 9 HB LUCITE cast acrylic sheet is combustible like many other synthetic and natural building materials. Small scale tests are not intended to reflect hazards under actual fire conditions. * This value changes with thickness. Value given is for 0.36 thickness or where otherwise indicated. 1 These are typical or average values and should not be used for specification purposes. Change in dimensions = coefficient x (dimension of sheet) x (change in temperature). 3 Call Toll Free

35 MATERIAL PROPERTIES Typical Property Values* of LEXAN Polycarbonate Sheet Property Method Units Value Physical Mechanical Thermal Electrical Flammability Specific Gravity Refractive F Light Transmission (Average), 1/8 disk Rockwell Hardness Abrasion Resistance, Taber Abrader, CS-17 wheel Water Absorption, Equilibrium, hrs 73 F 1 F Tensile Yield Ultimate Tensile Modulus Flexural Strength Flexural Modulus Flexural 1,800 cycles/min, 73 F, 50% RH Compressive Strength Compressive Modulus Elongation Poisson s Ratio Izod Impact Strength 1/8 1/8 Tensile Impact Strength, S-Type Specimen Shear Yield Ultimate Shear Modulus Deformation Under psi 73 F 158 F Coefficient of Thermal Expansion Coefficient of Thermal Conductivity Specific 0 F Heat Deflection 6 66 psi Brittle Temperature Dielectric Hz Volume Resistivity Power 1,000,000 Hz Arc Resistance Stainless Steel Strip Electrodes Tungsten Electrodes Horizontal Burn (Flame Spread) AEB ASTM D79 ASTM D5A ASTM D1003 ASTM D785 ASTM D10 ASTM D570 ASTM D638 ASTM D638 ASTM D790 ASTM D790 ASTM D671 ASTM D695 ASTM D695 ASTM D638 - D56A ASTM 18 ASTM D73 ASTM D73 ASTM D61 ASTM D696 ASTM C177 ASTM D68 ASTM D76 ASTM D150 ASTM D57 ASTM D150 ASTM D95 ASTM D % - mg/1,000 cycles % psi psi psi psi psi psi psi % - ft-lbs/in ft-lbs/in psi psi % in/in/ F Btu/hr/ft / F/in cal/gm/ C F F - ohm-cm sec in M ,000 9, 35,000 13, 35,000 1,000 1, 35, (no-failure) ,000 10,000 11, x x <1 * These are typical properties and are not intended for specification purposes. Call Toll Free 33

36 MATERIAL PROPERTIES Average Physical Properties of Plexiglas Sheet 1 Property Method Units Plexiglas G Plexiglas MC Optical Mechanical Thermal Thickness, nominal Specific gravity Refractive Index Light Transmittance and haze as received Parallel Total Haze Ultraviolet transmission, 30 nm Tensile strength (1/ in. specimen - 0. in/min) Maximum Rupture Elongation, maximum Elongation, rupture Modulus of elasticity Poisson s ratio Flexural strength (span depth ratio 16, 0.1 in/min) Maximum Rupture Deflection, maximum Deflection, rupture Modulus of Elasticity Compressive strength (0.05 in/min) Maximum Modulus of Elasticity Compressive deformation under load,000 psi at 1 F hrs,000 psi at 1 F hrs (conditioned 8 hrs at 1 F) Shear Strength Shear Modulus Impact Strength Charpy 73 F Izod milled 73 F Rockwell Hardness Hot forming temperature Deflection temperature under (flexural) load 3.6 F/min-6 psi Maximum recommended continuous service temp. Coefficient of thermal expansion -0 F -0 F ASTM D79 ASTM D5 ASTM D1003 ASTM DU-79 Beckman ASTM D638 ASTM D790 ASTM D695 ASTM D61 Method A ASTM D73 ASTM D56 ASTM D785 ASTM D68 R&H PA Cenco-Fitch in N/A N/A % % % % psi psi % % psi psi psi in in psi psi psi % % psi psi ft-lb/1/ in. x 1 in. sect. ft-lb/in of notch - F F F in/in/ X * 9* 1* 0 10, 10, , ,000 16, ,000 18,000 50, , , M-100* * 9* 1* 0 10,00 10, ,000-15,000 15, ,000 16,000 30, M-90* * * This value will change with thickness. The value given is for the thickness indicated in the column heading. 1 Values reported are averages and should not be used for specification purposes. Samples conditioned per ASTM D618, Procedure B, except where noted. 3 N.A. = Not applicable Call Toll Free

37 MATERIAL PROPERTIES Average Physical Properties of Plexiglas Sheet 1 (continued) Property Method Units Plexiglas G Plexiglas MC Thermal (cont.) Electrical Miscellaneous Coefficient of thermal conductivity Specific heat at 77 F Dielectric strength, short time test Dielectric constant 60 Hz 1,000 Hz 1,000,000 Hz Power factor 60 Hz 1,000 Hz 1,000,000 Hz Arc resistance Volume resistivity Surface resistivity Horizontal burning test average Burning rate Smoke Density Flammability classification Water absorption (weight gain) after immersion for: 1 day ( hours) Soluble matter lost Odor Taste ASTM D19 ASTM D150 ASTM D150 ASTM D95 ASTM D57 ASTM D57 ASTM D635 ASTM D83 BT/ (hr) (sq ft) ( F/in) BTU/ (lb)( F) volts/mill ohm-cm ohm/sq cm cm/min (in/min) % UL 9 % % No Tracking 6 x x (1.1*) -10 9HB 0.* 0.* None None / No Tracking 1 x x (1.0*) -10 9HB - 0.3* None None * This value will change with thickness. The value given is for the thickness indicated in the column heading. 1 Values reported are averages and should not be used for specification purposes. Samples conditioned per ASTM D618, Procedure B, except where noted. N.A. = Not applicable Call Toll Free 35

38 MATERIAL PROPERTIES Typical Properties* of PVC Sheet Property Method Units Value Physical Mechanical Thermal Flammability Chemical Electrical Density Water Absorption Rockwell Hardness Shore Durometer Cell Class Tensile Modulus Yield Strength Flexural Modulus Yield Strength Izod Impact Vicat Softening Point Heat Deflection Temperature Heat Deflection Temperature Linear Coefficient of Expansion Linear Coefficient of Expansion Flammability Flammability Flame Spread Chemical Resistance Electrical Volume Resistivity Dielectric Constant Dissipation Factor Loss Index Dielectric Strength ASTM D79 ASTM D570 ASTM D785 ASTM D0 178 ASTM D638 ASTM D638 ASTM D790 ASTM D790 ASTM D56 ASTM D155 ASTM D68 ASTM D68 ASTM D696 ASTM D696 ASTM D635 UL 9V E8 ASTM 178 ASTM D57 ASTM D150 ASTM D150 ASTM D150 ASTM D19 g/cm 3 % R Scale D -- psi psi psi psi ft-lbs/in C/ F C/ F C/ F in/in/ C in/in/ F Ohm/cm 60 Hz 60 Hz 60 Hz Volts/mil B 11,000 7, 81,000 1, /181 8/179 80/ x x 10-5 Self-Extinguishing 0 15 Class B 5. x *These are Typical properties and are not intended for specification purposes. 36 Call Toll Free

39 MATERIAL PROPERTIES Typical Property Values of CORZAN CPVC Sheet Property Method Units Value 1 Physical Mechanical Thermal Flammability Electrical Specific Gravity Water Absorption Rockwell Hardness Cell Class Izod Impact (Notched) Tensile Strength Flexural Strength Flexural Modulus Compressive Strength Compressive Modulus Coefficient of Thermal Expansion Thermal Conductivity Heat Distortion 6 psi Flammability Flame Spread Smoke Developed Limiting Oxygen Index Dielectric Strength Dielectric Constant Power Factor Volume Resistivity ASTM D79 ASTM D570 ASTM D785 ASTM D178 ASTM D56 ASTM D638 ASTM D790 ASTM D790 ASTM D695 ASTM D695 ASTM D696 ASTM C177 ASTM D68 UL 9 E8 E8 ASTM D863 ASTM D17 ASTM D150 ASTM D150 ASTM D57 g/cm 3 % R Scale -- ft-lb/in o.n. psi psi psi psi psi in/in/ F BTU/in/hr/ft 3 / F C/ F V-0, 5VB, 5VA % Volt/MIL 60 Hz Hz Ohm/cm B 1.5 8,000 15,100 15,000 10, , x / % 3. x *These are Typical properties and are not intended for specification purposes. Call Toll Free 37

40 MATERIAL PROPERTIES Typical Property Values* of High Density Polyethylene Property Method Units Value ASTM Type, Class, Category Melt Index Density Hardness Tensile Break Break Flexural Modulus 1% Scant Modulus Tensile Impact, () Environment Stress Crack Resistance, F50 Low Temperature Brittleness, F50 Heat Deflection 66 PSI Vicat Softening Point ASTM D18 ASTM D138 ASTM D1505 ASTM D0 ASTM D638 ASTM D638 ASTM D790 ASTM D790 ASTM D18 ASTM D1693 ASTM D561 ASTM D76 ASTM D68 ASTM D155 - g/10 min. g/cm 3 Shore D psi % psi psi ft-lb/in hrs. hrs. C C C IV, A, >600 0, < Black Pipe Grade High Density Polyethylene Property Method Units Value ASTM Type, Class, Category, Grade Cell Classification PPI Recommended Designation Density Melting Point Reduced Specific Viscosity (RSV) Melt Flow Indices 190 C/5kg Melt Flow Indices 109 C/1.6kg (HM1) Hydrostatic Design Basis 100,000 hrs. 73 F (3 C) Compressed Ring ESCR (50 C/5% lgepal) Rockwell Hardness Shore Hardness ESCR (100% lgepal) Izod Impact Strength (Notched) Tensile Yield Break Scant Modulus of % Strain Flexural % Strain Vicat Softening Point Brittleness Temperature Heat Distortion Temperature Thermal Expansion ASTM D18 ASTM D ASTM D79 ASTM D317 ASTM D1601 ASTM D138 ASTM D138 ASTM D837 ASTM F18 ASTM D785 ASTM D0 ASTM D1693C ASTM D56A ASTM D638 ASTM D638 ASTM D638 ASTM D3350 ASTM D155 ASTM D76 ASTM D68 ASTM D PE 308 g/cm F dl/g g/10 min g/10 min psi hrs. L Scale Shore D hrs. ft-lb/in psi % psi psi F F F in/in/ F III, A, 5, P3 35, ,600 >1,000 (no failures) 9 63 >5,000 (no failures) 8 >3,300 > ,000 15, x 10-1 * The data listed above was determined on press molded test specimens and may, therefore, vary from the specimens taken from pipes and sheet. Type IV specimen, in/min. 1/8 thick specimen. FDA Registered. N550 Carbon Black, NSF Approved for potable water UV Stabilized.5% Carbon Black ± 0.5%. 38 Call Toll Free

41 MATERIAL PROPERTIES Physical Properties UHMWPE Property Method SI Units SI Value English Unit English Value Density Yield Point Elongation at Yield Tensile Break Elongation at Break Tensile Modulus Flexural Modulus Izod Impact Tensile Impact Sand Wheel Wear Hardness Static Friction Dynamic Friction Coefficient of Thermal Expansion Melt Point Maximum Operating Temperature Compressive Modulus Compressive Deformation Volume Resistivity Surface Resistivity Water Absorption ASTM D79 ASTM D638 ASTM D638 ASTM D638 ASTM D638 ASTM D638 ASTM D790 ASTM D00 DIN 538 ASTM G-65 ASTM D0 ASTM D189 ASTM D189 ASTM D696 ASTM D317 ASTM D695 ASTM D61 ASTM D57 ASTM D57 ASTM D570 kg/m 3 MPa % MPa % MPa MPa kj/m kj/m T-=100 Shore D Unitless Unitless C -1 C C MPa % at 5.5 kg Ohm-cm Ohm % >10 15 >10 15 nil lbs/ft 3 psi % psi % psi psi ft-lbs/in ft-lbs/in T-=100 Shore D Unitless Unitless F -1 F F psi % at psi Ohm-cm Ohm % >10 15 >10 15 nil Values are averages and are not specifications. ASTM test methods are under current procedures. Call Toll Free 39

42 MATERIAL PROPERTIES CPG Seaboard Typical Properties* Property Method Units Value Physical Mechanical Thermal Density Melt Index Hardness, Shore D Environmental Stress Crack Resistance, F50 Tensile Break Break Flexural Modulus Tensile Impact Low Temperature Brittleness, F50 Heat Deflection 66 PSI Vicat Softening Point ASTM D1505 ASTM D138 ASTM D0 ASTM D1693 ASTM D561 ASTM D638 ASTM D638 ASTM D790 ASTM D18 ASTM D76 ASTM D68 ASTM C155 g/cm 3 g/10 min hrs. hrs. psi % psi ft-lb/in C C C >,00 >600 0, < CPG Seaboard meets all the requirements of the Food and Drug Administration regulation 1 CFR for articles intended for use in direct contact with foodstuffs. CPG Seaboard is ultraviolet stabilized. *These are Typical properties and are not intended for specification purposes. 0 Call Toll Free

43 MATERIAL PROPERTIES Typical Properties* Polypropylene Sheet Property Method Units Value (1) Physical Mechanical Density (3) Nominal Melt Flow () Rockwell Hardness Melting Point (6) Tensile Yield () Yield () Flexural Modulus Izod Impact (5) 73 F (3 C) ASTM D79 ASTM D138 ASTM D785 Aristech ASTM D638 ASTM D638 ASTM D790A ASTM D56 g/cm 3 g/10 min R Scale C/ F psi MPa % psi MPa ft-lb/in J/m / , (1) Injection Molded Specimens where applicable. () 30 C/.16 kg (3) at 73 F (3 C) () Type I specimen at in/min (50 mm/min) speed (5) 1/8 inch (3.175 mm) bar (6) by DSC Meets the standards established by FDA regulation 1 CFR for all food contact. *These are Typical properties and are not intended for specification purposes. Call Toll Free 1

44 MATERIAL PROPERTIES Typical Properties of KYNAR PVDF Property Method Units Value Physical Mechanical Thermal Electrical Density Water Absorption, hrs Tensile Strength Tensile Modulus Tensile Break Flexural Strength Flexural Modulus Compressive Strength Compressive Modulus Hardness IZOD Notched Impact Coefficient of Linear Thermal Expansion Heat Deflection 6 psi Melting Temp Max Operating Temp Thermal Conductivity Flammability Rating Dielectric Strength short time, 1/8 thick Dielectric 1 Mhz Dissipation 1 MHz Volume 50% RH ASTM D79 ASTM D570 ASTM D638 ASTM D638 ASTM D638 ASTM D790 ASTM D790 ASTM D695 ASTM D695 ASTM D0 ASTM D56 ASTM D696 ASTM D68 ASTM D318 - ASTM C177 UL 9 ASTM D19 ASTM D150 ASTM D150 ASTM D57 lb/in 3 g/cm 3 % psi psi % psi psi psi psi Shore ft-lb/in x 10-5 in/in/ F F/ C F/ C F/ C BTU-in/ft - hr- F x 10 - cal/cm-sec- C -- V/mil 1 MHz 1 MHz Ohm-cm ,300 90, ,700 90,000 9, D /110 33/166 75/ V-O x Note: The information contained herein are typical values intended for reference and comparison purposes only. They should NOT be used as a basis for design specifications or quality control. All values at 73 F (3 C) unless otherwise noted. Call Toll Free

45 MATERIAL PROPERTIES Typical Properties* of HYLAR PVDF Property Method Units Value Melting Point Melt Viscosity Specific Gravity Moisture Absorption Hardness Tensile 3 C Mpa Tensile 3 C Mpa 3 C 3 C Tensile 3 C Mpa Flexural 3 C Mpa Flexural 3 C Mpa Heat Distortion 66 psi.6 6 psi 1.8 Mpa Compressive 3 C Mpa (min) IZOD 3 C Notched Coefficient of Friction Static Dynamic Limiting Oxygen Index Thermal 3 C -130 C W/m/k (BTU/in) / (HR/Ft/ F) Coefficient Thermal Expansion Specific Heat Brittleness Temperature Volume Resistivity Arc Resistance, minimum Dielectric Constant 60 khz 1 khz 1 MHz Dissipation Factor 60 Hz 1 khz 1 MHz Dielectric Strength, 0.15 thickness V/mil (V/mil) ASTM D318 ASTM D3835 ASTM D79 ASTM D570 ASTM D0 ASTM D638 ASTM D638 ASTM D638 ASTM D638 ASTM D638 ASTM D790 ASTM D ASTM D695 ASTM D56 ASTM D189 ASTM D189 ASTM D863 ASTM C177 ASTM D696 DSC ASTM D36 ASTM D57 ASTM D95 ASTM D150 ASTM D150 ASTM D19 C/ 3 C, 100 s. 1 (kilopoise) g/cc (lbs/in 3 ) (%) Shore D psi psi % % psi psi psi TMA C ( F) C ( F) -- J/m (ft.lb./in) % C -1 ( F -1 ) J/g C (BTU/lb F) C ( F) ohm/cm (ohm/in) (sec) khz khz MHz Hz khz MHz 310 (310) (39-33) ( ) ( ) 35-8 ( ) (x10 5 to.5 x 10 5 ) 8-55 ( ) (x10 5 to 3 x 10 5 ) (57-8) (1-0) 61 minimum (8850) (1.5-.5) ( ) 10-1 x 10-5 ( x 10 5 ) 1.9 (.5) -3 (-6) 1. x 10 (5.5 x ) *These are Typical properties and are not intended for specification purposes. Call Toll Free 3

46 MATERIAL PROPERTIES Typical Properties* of TEFLON PTFE Property Method Units Value Mechanical Thermal Electrical General Specific Gravity Tensile Strength Elongation Flexural Modulus Folding Endurance Impact Strength Hardness Coefficient of Friction, Dynamic Melting Point Upper Service Temperature (0,000h) Flame Rating** Limiting Oxygen Index Heat of Combustion Dielectric Constant Dissipation Factor Arc Resistance Volume Resistivity Surface Resistivity Weather Resistance Chemical/Solvent Resistance Water Absorption h ASTM D79 ASTM D157 ASTM D1708 ASTM D638 ASTM D157 ASTM D1708 ASTM D638 ASTM D790 ASTM D176 ASTM D56 ASTM D0 ASTM D189 ASTM D318 UL76B UL 9 ASTM D863 ASTM D0 ASTM D150 ASTM D150 ASTM D95 ASTM D57 ASTM D57 Florida Exposure ASTM D53 ASTM D MPa (psi) % MPa (psi) (MIT) cycles J/m (ft-lb/in) Shore D <3 m/min (<10 ft/min) C ( F) C ( F) % MJ/kg (Btu/lb) 1 MHz 1 MHz sec ohm-cm ohm-sq Years Unaffected % (3,000-5,000) 300- (7,000) > (3.5) (61) 60 () VO > (,00).1 < >300 >10 18 > Excellent <0.01 * Typical values are unsuitable for specifications. Properties were measured at 3 C (73 F), unless otherwise noted. ** Statements regarding behavior in a flame situation are not intended to reflect hazards presented by this or any other material when under actual fire conditions. Call Toll Free

47 GLASSWARE Glassblowing S. G. & P., Inc. has a full scale glassblowing facility which employs a highly skilled staff of glassblowers. We do custom fabrication of new glassware, as well as repair work. We primarily use two types of glass in our fabrication: borosilicate and quartz. Borosilicate glass is also known under the brand names of Pyrex (a registered trademark of Corning Glassworks) and Kimax (a registered trademark of Kimble Glass Company). Pyrex and Kimax are used in the fabrication of most laboratory apparatus and are compatible when mixed. These glasses have a high resistance against chemical attack and thermal shock. Due to a low coefficient of expansion, mechanical breakage is minimized. Quartz glass is transparent and contains 99.9% silica. Characterized by practically zero thermal expansion, quartz is not affected by thermal shock. Excellent uses for quartz include: furnace tubes, flat sight glasses requiring high temperature, or any high-temperature situation. Call Toll Free 5

48 Table of Contents Glassware Page Adapters Adapters, Threaded Beakers... 6 Bottles Bubblers... 6 Chromatography Columns Condensers Distillation Columns Distillation Heads Distillation Receivers Evaporator Condensers Evaporator Traps Extractors Flasks Funnels Gas Sampling Impingers Mantles Reaction Apparatus Reactors, Pilot Plant... 1 Stirrers Stoppers Vacuum Manifolds Vacuum Traps Repairs Due to the fragile nature of glassware, we cannot be responsible for any loss during repair efforts. Items sent in for repair should be thoroughly cleaned and securely packaged. Specialty and Custom Glassware We will be happy to quote on special items not found in the catalog or on modifications of listed glassware. Please provide drawings if possible. 6 Call Toll Free

49 ADAPTERS 000 ADAPTER, STRAIGHT Standard taper inner joints both ends /0 /0 /0 /0 9/6 9/6 9/ 9/ 9/ 9/ Lengths Between s mm ADAPTER, STRAIGHT Standard taper outer joints both ends /0 /0 /0 /0 9/6 9/6 9/ 9/ 9/ 9/ Lengths Between s mm SG & P offers adapters with different lengths and joint combinations than those listed. Call for more information. Call Toll Free 7

50 ADAPTERS 00 ADAPTER, STRAIGHT, LENGTHENING Standard taper top outer and lower inner joint /0 1/0 /0 /0 /0 /0 9/ 9/ 9/ 9/ Lengths Between s MM ADAPTER, ENLARGING Standard taper joints. Lower inner joint is smaller is size than top outer joint Top Outer /0 /0 /0 9/ 9/ 9/ 3/5 3/5 3/5 3/5 55/50 55/50 Lower Inner 1/0 1/35 19/38 1/35 19/38 /0 1/35 19/38 /0 9/ 3/5 5/50 SG & P offers adapters with different lengths and joint combinations than those listed. Call for more information. 8 Call Toll Free

51 ADAPTERS 00 ADAPTER, REDUCING Standard taper joints. Lower inner joint is larger in size than top outer joint Top Outer 10/30 10/30 10/30 10/30 10/30 10/30 10/30 1/0 1/35 1/35 19/38 19/38 19/38 19/38 /0 /0 /0 9/ 9/ Lower Inner 1/0 1/35 19/ /0 9/ 3/5 5/50 /0 /0 9/ /0 9/ 3/5 5/50 9/ 3/5 5/50 3/5 5/ ADAPTER, COMBINATION Top standard taper outer joint and lower ball joint /0 /0 9/ 9/ Lower Ball 8/15 35/5 8/15 35/ ADAPTER, COMBINATION Top socket joint and lower standard taper inner joint Top Socket 35/5 35/5 Lower Inner s /0 9/ SG & P offers adapters with different lengths and joint combinations than those listed. Call for more information. 006 Call Toll Free 9

52 ADAPTERS 007 ADAPTER, DISTILLATION, 75 Standard taper inner joints at a 75 angle /0 /0 9/ 008 ADAPTER, INLET, INNER JOINT Standard taper inner joint. 10mm hose connection /0 /0 9/ ADAPTER, INLET, OUTER JOINT Standard taper outer joint. 10mm hose connection /0 /0 9/ ADAPTER, INLET, INNER JOINT, 90 Standard taper inner joint. 10mm hose connection at /0 /0 9/ 010 SG & P offers adapters with different lengths and joint combinations than those listed. Call for more information. 50 Call Toll Free

53 ADAPTERS 011 ADAPTER, INLET, INNER JOINT, 90 Standard taper inner joint with extension to allow introduction of reactants below the interior surface. 10mm hose connection at /0 /0 9/ Length Below MM ADAPTER, INLET, FRITTED, INNER JOINT Standard taper inner joint. Extra course disc between joint and 10mm hose connection /0 /0 9/ 013 ADAPTER, BUSHING Standard taper inner joint with outer joint ground in the bore of the adapter Lower Inner 1/0 1/35 /0 9/ 9/ Top Outer 10/30 10/30 10/30 10/30 / ADAPTER, CLAISEN Parallel side arm for dual entry. Standard taper outer joints on top arms and lower inner joint /0 /0 9/ SG & P offers adapters with different lengths and joint combinations than those listed. Call for more information. 01 Call Toll Free 51

54 ADAPTERS 015 ADAPTER, CLAISEN Standard taper outer joint at top of main tube for use with a thermometer. Standard taper outer joint on side arm and inner joint at bottom /0 /0 9/ Thermometer 10/18 10/30 10/ ADAPTER, DISTILLATION, CLAISEN Distilling adapter with a standard taper 10/30 joint on the vertical side tube for a 75mm immersion thermometer /0 9/ ADAPTER, DISTILLATION, CLAISEN Stopcock on lower side tube and a standard taper 10/30 joint at the top of main tube for a 75mm immersion thermometer /0 /0 9/ 9/ Stopcock Type Glass Teflon Glass Teflon 018 ADAPTER, DISTILLATION, 75 Standard taper outer joint at top, inner joint at bottom and side /0 /0 9/ 018 SG & P offers adapters with different lengths and joint combinations than those listed. Call for more information. 5 Call Toll Free

55 ADAPTERS 019 ADAPTER, DISTILLATION, 75 Standard taper outer joint at top for use with a thermometer, inner joint at bottom and side /0 /0 9/ Thermometer 10/18 10/30 10/ ADAPTER, 105 Standard taper outer joints top and side, inner joint at bottom /0 9/ ADAPTER, FLOW CONTROL, GLASS STOPCOCK, 90 Standard taper inner joint. mm bore stopcock, 8mm hose connection /0 /0 9/ 01 0 ADAPTER, FLOW CONTROL, TEFLON STOPCOCK, 90 Standard taper inner joint. mm bore stopcock, 8mm hose connection /0 /0 9/ 0 SG & P offers adapters with different lengths and joint combinations than those listed. Call for more information. Call Toll Free 53

56 ADAPTERS 03 ADAPTER, FLOW CONTROL, GLASS STOPCOCK, 90 Standard taper outer joint. mm bore stopcock, 8mm hose connection /0 9/ 03 0 ADAPTER, FLOW CONTROL, TEFLON STOPCOCK, 90 Standard taper outer joint. mm bore stopcock, 8mm hose connection /0 9/ 0 05 ADAPTER, FLOW CONTROL, GLASS STOPCOCK Standard taper inner joint. mm bore stopcock, 8mm hose connection /0 9/ ADAPTER, FLOW CONTROL, TEFLON STOPCOCK Standard taper inner joint. mm bore stopcock, 8mm hose connection /0 9/ 06 SG & P offers adapters with different lengths and joint combinations than those listed. Call for more information. 5 Call Toll Free

57 ADAPTERS 07 ADAPTER, FLOW CONTROL, TEFLON METERING STOPCOCK Standard taper top outer and lower inner joints. mm metering stopcock /0 /0 9/ ADAPTER, SYRINGE ADDITION Standard taper top outer and lower inner joints. Supplied with one rubber septa /0 /0 9/ ADAPTER, DISTILLING TRAP, KJELDAHL Standard taper top outer and lower inner joints. Used above flask to prevent foaming type reactions from entering the distilling column or condenser /0 /0 9/ ADAPTER, VACUUM TAKE-OFF, VERTICAL Standard taper top outer and lower inner joints with sealed in drip tip. 10mm hose connection /0 /0 9/ 030 SG & P offers adapters with different lengths and joint combinations than those listed. Call for more information. Call Toll Free 55

58 ADAPTERS 031 ADAPTER, VACUUM TAKE-OFF, LONG STEM Standard taper top outer and lower inner joints with sealed in lower tube extending below inner joint. 10mm hose connection /0 /0 9/ ADAPTER, VACUUM TAKE-OFF, 105 Standard taper top outer and lower inner joints with sealed in drip tip. 10mm hose connection /0 /0 9/ 033 ADAPTER, VACUUM TAKE-OFF, 105 Standard taper top outer and lower inner joints with sealed in lower tube extending below inner joint. 10mm hose connection /0 /0 9/ ADAPTER, GAS INLET Standard taper top outer and lower inner joints with tube extending below inner joint. 10mm hose connection /0 9/ 03 SG & P offers adapters with different lengths and joint combinations than those listed. Call for more information. 56 Call Toll Free

59 ADAPTERS 035 ADAPTER, GAS INLET, STRAIGHT Standard taper top outer and lower inner joints. 10mm hose connection /0 /0 9/ ADAPTER, INERT GAS Standard taper joint with twin hose connections opposite each other to allow inert gas flow over the top of apparatus. 10mm hose connections /0 /0 9/ ADAPTER, THERMOMETER, 10 OFFSET Standard taper inner joint with 10/30 outer joint at top for use with a thermometer /0 9/ ADAPTER, OFFSET Standard taper top outer and lower inner joints /0 /0 9/ SG & P offers adapters with different lengths and joint combinations than those listed. Call for more information. 038 Call Toll Free 57

60 ADAPTERS 039 ADAPTER, DISTILLATION, 105 Standard taper top outer and lower inner joints /0 /0 9/ 00 ADAPTER, DISTILLATION, 105 Standard taper top outer and lower inner joints with sealed lower drip tip / ADAPTER, DISTILLATION, PARALLEL, 75 Standard taper top inner joints /0 /0 9/ 0 ADAPTER, DISTILLATION, PARALLEL, 75 Standard taper inner joints with sealed in drip tip and hose connection /0 /0 9/ SG & P offers adapters with different lengths and joint combinations than those listed. Call for more information. 58 Call Toll Free

61 ADAPTERS 03 ADAPTER, DISTILLATION, 105, JACKETED Water jacket completely surrounds adapter, for use with highly volatile condensates. 10mm hose connection /0 9/ 03 0 ADAPTER, DISTILLATION, 75, JACKETED For use as a distilling head to connect top of column with condenser. Standard taper inner joints at bottom and side. Top 10/30 outer joint for use with 75mm immersion thermometer /0 9/ 0 05 ADAPTER, DISTILLING TRAP, 75, KJELDAHL Standard taper inner joint with drip tip. 8mm outlet tube /0 9/ ADAPTER, DISTILLING, 75 Standard taper inner lower inner joints. 10/18 or 10/30 joint at top for thermometer /0 /0 9/ SG & P offers adapters with different lengths and joint combinations than those listed. Call for more information. 06 Call Toll Free 59

62 ADAPTERS, THREADED ACE-THREDS Ace-Threds offer a great grease free, clamp free connection on many types of scientific glassware. ACE-THRED SIZES #7 #11 #15 #18 #5 #36 #50 #80 Accepts Tube 6-7 mm mm mm mm -5 mm 3-35 mm 7-8 mm 75 mm O.D. 1/ 3/8 1/ 5/ / 3 07 ADAPTER, ACE-THRED Standard taper joint at bottom and Ace-Thred at top. Includes threaded bushing and o-ring /0 /0 9/ /0 9/ Thread #7 #7 #7 #11 #11 08 ADAPTER, OFFSET, ACE-THRED Thermometer adapter with standard taper joint at bottom and top thread offset and angled approximately 10. Includes threaded bushing and o-ring ADAPTER, WITH HOSE CONNECTION, ACE-THRED Standard taper joint at bottom, Ace-Thred at top and hose connection. Includes threaded bushing and o-ring /0 1/0 /0 9/ /0 9/ Thread #7 #7 #7 #11 #11 We can add Ace-Threds to any piece of custom glassware. 60 Call Toll Free

63 ADAPTERS, THREADED 050 ADAPTER, WITH STOPCOCK, ACE-THRED Standard taper joint at bottom, Ace-Thred at top, with Teflon mm bore stopcock and hose connection. Includes threaded bushing and o-ring /0 /0 9/ /0 9/ Thread #7 #7 #7 #11 # ADAPTER, CLAISEN, ACE-THRED Top side arm has Ace-Thred for use with adjustable length thermometer. Includes threaded bushing and o-ring /0 Thread #7 05 ADAPTER, 75 ANGLE, ACE-THRED Standard taper inner joints at bottom and side. Ace-Thred at top for use with adjustable length thermometer. Includes threaded bushing and o-ring /0 Thread #7 053 ADAPTER, OFFSET, ACE-THRED Standard taper inner joint at bottom and offset outer joint. Ace-Thred at top for use with adjustable length thermometer. Includes threaded bushing and o- ring /0 Thread #7 05 ADAPTER, DISTILLING, ACE-THRED For connecting distilling column with vertical condenser. Standard taper inner joints at bottom and Ace-Thred at top. Includes threaded bushing and o-ring /0 Thread #7 We can add Ace-Threds to any piece of custom glassware. 05 Call Toll Free 61

64 BEAKERS, BOTTLES BEAKER, JACKETED REACTION Designed for use in a variety of temperature controlled reactions. Jacket has 10mm hose connections. Specify capacity ML BEAKER, GRIFFIN, LOW FORM Graduated with pour spout. Specify capacity. 101 BOTTLES 00 BOTTLE, GAS WASHING, TALL FORM, FRITTED Standard taper 9/ joint. Available with coarse or extra coarse fritted cylinder. Complete Bottles: ML Approximate Height MM Porosity X-Coarse Coarse X-Coarse Coarse X-Coarse Coarse 6 00 Replacement Components: Description Stopper Stopper Stopper Stopper Stopper Stopper Bottle Bottle Bottle Approximate Height MM 15ml 15ml 50ml 50ml ml ml 15ml 50ml ml Porosity X-Coarse Coarse X-Coarse Coarse X-Coarse Coarse mm S.S. Springs, Pkg. of 1 Call Toll Free

65 BOTTLES 01 BOTTLE, GAS WASHING, FRITTED Standard taper 5/50 joint. Available with coarse or extra coarse fritted disc angled 15 for more uniform gas distribution. Complete Bottles: ML Approximate Height MM Porosity Coarse X-Coarse Coarse X-Coarse Coarse X-Coarse Replacement Components: Approximate Description Height MM Porosity Stopper 15ml Coarse Stopper 15ml X-Coarse Stopper 50ml Coarse Stopper 50ml X-Coarse Stopper ml Coarse 01-1 Stopper ml X-Coarse Bottle 15ml 01-1 Bottle 50ml Bottle ml mm S.S. Springs, Pkg. of 1 01 Call Toll Free 63

66 BOTTLES, BUBBLERS 0 BOTTLE, GAS WASHING FRITTED DISC Standard taper /0 joint. Sealed in 60mm fritted disc. Available with coarse or extra coarse. Complete Bottles: ML Approximate Height MM Porosity X-Coarse Coarse Replacement Components: Description Bottle Bottle /0 Gas Inlet Adapter Porosity X-Coarse Coarse BUBBLERS 300 BUBBLER Provides a vent to the atmosphere. Reservoir head prevents oil from being sucked back into the system. Volume approximately 0ml below side arm We can quote on any type bubbler you may require Call Toll Free

67 CHROMATOGRAPHY COLUMNS 00 CHROMATOGRAPHY COLUMN General purpose column. mm bore Teflon stopcock Column I.D. in. (mm).50 (13).50 (13).50 (13).50 (13) Effective Length in. (cm) 8 (0.3) 10 (5.) 1 (30.5) 18 (5.7) (19).75 (19).75 (19).75 (19) 8 (0.3) 10 (5.) 1 (30.5) 18 (5.7) (5) 1.0 (5) 1.0 (5) 1.0 (5) 8 (0.3) 10 (5.) 1 (30.5) 18 (5.7) (38) 1.5 (38) 1.5 (38) 1.5 (38) 8 (0.3) 10 (5.) 1 (30.5) 18 (5.7) (50).0 (50).0 (50).0 (50).0 (50) 8 (0.3) 10 (5.) 1 (30.5) 18 (5.7) (60.1) Call Toll Free 65

68 CHROMATOGRAPHY COLUMNS 01 CHROMATOGRAPHY COLUMN, WITH FRITTED DISC General purpose column with sealed in coarse fritted disc. mm bore Teflon stopcock Column I.D. in. (mm).50 (13).50 (13).50 (13).50 (13) Effective Length in. (cm) 8 (0.3) 10 (5.) 1 (30.5) 18 (5.7) (19).75 (19).75 (19).75 (19) 8 (0.3) 10 (5.) 1 (30.5) 18 (5.7) (5) 1.0 (5) 1.0 (5) 1.0 (5) 8 (0.3) 10 (5.) 1 (30.5) 18 (5.7) (38) 1.5 (38) 1.5 (38) 1.5 (38) 8 (0.3) 10 (5.) 1 (30.5) 18 (5.7) (50).0 (50).0 (50).0 (50).0 (50) 8 (0.3) 10 (5.) 1 (30.5) 18 (5.7) (60.1) 66 Call Toll Free

69 CHROMATOGRAPHY COLUMNS 0 CHROMATOGRAPHY COLUMN, STANDARD TAPER JOINT General purpose column with standard taper outer joint. mm bore Teflon stopcock Column I.D. in. (mm).50 (13).50 (13).50 (13).50 (13) Effective Length in. (cm) 8 (0.3) 10 (5.) 1 (30.5) 18 (5.7) /0 /0 /0 / (19).75 (19).75 (19).75 (19) 8 (0.3) 10 (5.) 1 (30.5) 18 (5.7) /0 /0 /0 / (5) 1.0 (5) 1.0 (5) 1.0 (5) 8 (0.3) 10 (5.) 1 (30.5) 18 (5.7) /0 /0 /0 / (38) 1.5 (38) 1.5 (38) 1.5 (38) 8 (0.3) 10 (5.) 1 (30.5) 18 (5.7) /0 /0 /0 / (50).0 (50).0 (50).0 (50).0 (50) 8 (0.3) 10 (5.) 1 (30.5) 18 (5.7) (60.1) /0 /0 /0 /0 /0 Call Toll Free 67

70 CHROMATOGRAPHY COLUMNS 03 CHROMATOGRAPHY COLUMN, STANDARD TAPER JOINT, WITH FRITTED DISC General purpose column with sealed in coarse fritted disc and standard taper outer joint. mm bore Teflon stopcock Column I.D. in. (mm).50 (13).50 (13).50 (13).50 (13) Effective Length in. (cm) 8 (0.3) 10 (5.) 1 (30.5) 18 (5.7) /0 /0 /0 / (19).75 (19).75 (19).75 (19) 8 (0.3) 10 (5.) 1 (30.5) 18 (5.7) /0 /0 /0 / (5) 1.0 (5) 1.0 (5) 1.0 (5) 8 (0.3) 10 (5.) 1 (30.5) 18 (5.7) /0 /0 /0 / (38) 1.5 (38) 1.5 (38) 1.5 (38) 8 (0.3) 10 (5.) 1 (30.5) 18 (5.7) /0 /0 /0 / (50).0 (50).0 (50).0 (50).0 (50) 8 (0.3) 10 (5.) 1 (30.5) 18 (5.7) (60.1) /0 /0 /0 /0 /0 0 CHROMATOGRAPHY RESERVOIR For use with chromatography columns. /0 standard taper top outer and lower inner joints ML Call Toll Free

71 CHROMATOGRAPHY COLUMNS 05 FLOW CONTROL ADAPTER /0 standard taper inner joint. 0-mm metering plug CHROMATOGRAPHY COLUMN, STANDARD TAPER JOINT, WITH RESERVOIR General purpose column with reservoir in capacities shown. Standard taper outer joint. mm bore Teflon stopcock I.D. in Effective Length in Reservoir ml /0 /0 /0 /0 /0 /0 /0 /0 /0 /0 /0 /0 07 CHROMATOGRAPHY COLUMN, STANDARD TAPER JOINT WITH RESERVOIR AND FRITTED DISC General purpose column with reservoir in capacities shown and sealed in coarse fritted disc. Standard taper outer joint. mm bore Teflon stopcock I.D. in Effective Length in Reservoir ml /0 /0 /0 /0 /0 /0 /0 /0 /0 /0 /0 /0 07 Call Toll Free 69

72 CONDENSERS CONDENSER, ALLIHN Bulb type condenser. Standard taper top outer joint and lower inner joint with drip tip. 10mm hose connections Jacket Length mm /0 /0 /0 /0 /0 /0 9/ 9/ 9/ 9/ 9/ 9/ 501 CONDENSER, ALLIHN Bulb type condenser with plain tubulation at top and standard taper lower inner joint with drip tip. 10mm hose connections Jacket Length mm /0 /0 /0 /0 9/ 9/ 9/ Call Toll Free

73 CONDENSERS 50 CONDENSER, GRAHAM Standard taper top outer joint and lower inner joint with drip tip. 10mm hose connections Jacket Length mm /0 /0 /0 /0 /0 /0 9/ 9/ 9/ 9/ 9/ 9/ CONDENSER, GRAHAM Standard taper top outer joint and lower 8mm delivery stem. 10mm hose connections Jacket Length mm 300 /0 50 CONDENSER, COILED Double jacketed with standard taper top outer joint and lower inner joint with drip tip. 10mm hose connections at top opposite each other Jacket Length mm /0 /0 / Call Toll Free 71

74 CONDENSERS 505 CONDENSER, REFLUX Standard taper top outer joint and lower inner joint with drip tip. 10mm hose connections Jacket Length mm /0 /0 /0 /0 /0 9/ 9/ 9/ 9/ 9/ 506 CONDENSER, REFLUX, SPIRAL Standard taper top outer joint and lower inner joint with drip tip. Both 10mm hose connections same side at top Jacket Length mm /0 /0 /0 /0 /0 /0 9/ 9/ 9/ 9/ 507 CONDENSER, CONCENTRATOR Vapors rise to the top of inner tube then travel down and condense. Condensate drains through the side tube. Standard taper inner joints. 10mm hose connection Inner Tube Height mm /0 9/ 7 Call Toll Free

75 CONDENSERS 508 CONDENSER, FRIEDRICHS Designed to provide a long vapor path, good heat transfer and anti-flooding characteristics. Standard taper outer joint 15 to the condenser and lower inner joint with drip tip. 10mm hose connections /0 9/ 509 CONDENSER, FRIEDRICHS Similar to 508, but with a hose connection in place of side joint. 10mm hose connections. Primarily used in reflux mode and Soxhlet extractions /0 3/5 510 CONDENSER, DEWAR Large opening for dry ice/acetone or liquid nitrogen. Standard taper inner joint with drip tip. 10mm hose connection Inside Dimensions Depth x I.D. mm 00 x 0 50 x x x 0 50 x x 75 /0 /0 /0 9/ 9/ 9/ 511 CONDENSER, DEWAR Large opening dry ice/acetone or liquid nitrogen. Standard taper outer joint at top and lower inner joint with drip tip Inside Dimensions Depth x I.D. mm 90 x x x x 0 50 x x x 0 50 x x 75 1/0 1/0 1/0 /0 /0 /0 9/ 9/ 9/ 511 Call Toll Free 73

76 CONDENSERS CONDENSER, LIEBIG Standard taper top outer joint and lower inner joint with drip tip. 10mm hose connections Jacket Length mm /0 /0 /0 /0 /0 /0 /0 9/ 9/ 9/ 9/ 9/ 9/ 513 CONDENSER, LIEBIG, JACKETED Standard taper top outer joint and lower inner joint with drip tip. Both outer and inner joints water jacketed. 10mm hose connections Jacket Length mm /0 /0 /0 9/ 9/ 9/ 51 CONDENSER, COLD FINGER Standard taper inner joint and sealed lower drip tip. 10mm hose connection Length Below mm Call Toll Free 1/0 /0 /0 /0 9/ 9/ 9/

77 DISTILLATION COLUMNS 600 DISTILLING COLUMN, HEMPLE Standard taper top outer and lower inner joints. Indentations to support packing. Column length listed refers to the length between the indentations to the bottom of the top outer joint /0 1/0 /0 /0 /0 /0 /0 /0 /0 /0 /0 9/ 9/ 9/ 9/ 9/ 9/ 9/ 9/ 9/ Column I.D. mm Column Length mm DISTILLING COLUMN, HEMPLE, VACUUM JACKETED Same as 600, except with vacuum jacket. All sizes have 10mm ID /0 /0 Column Length mm Overall Length mm DISTILLING COLUMN, WATER JACKETED Standard taper top outer and lower inner joints. Indentations to support packing. Column length listed refers to the length between the indentations to the bottom of the top outer joint. Jacket allows the column to be used as a condenser. 10mm hose connections. All sizes have 10mm ID /0 1/0 /0 Column Length mm Overall Length mm Call Toll Free 75

78 DISTILLATION COLUMNS 603 DISTILLING COLUMN, VIGREUX Standard taper top outer and lower inner joints. Indentations run entire length of the column. Column length listed refers to the length from the lowest to the highest indentations /0 1/0 1/0 /0 /0 /0 /0 /0 9/ 9/ 9/ 9/ 9/ Column Length mm DISTILLING COLUMN, SNYDER Standard taper top outer and lower inner joints. Floating ball valves for improved vapor-liquid contact. Each section is approximately 50mm long /0 /0 /0 /0 Column Length mm Call Toll Free

79 DISTILLATION COLUMNS 605 DISTILLING COLUMN, PERFORATED PLATE, OLDERSHAW Standard taper top outer and lower inner joints. Sealed in perforated plates with weirs Plate Diameter mm of Plates / 9/ 9/ 9/ 9/ 9/ 9/ 9/ 9/ 9/ 55/50 55/50 55/50 55/50 55/ DISTILLING COLUMN, PERFORATED PLATE, OLDERSHAW, JACKETED, SILVERED Same as 605 but with the addition of a vacuum jacket, internal bellows and silvered with two 1/ wide viewing strips Plate Diameter mm of Plates / 9/ 9/ 9/ 9/ 9/ 9/ 9/ 9/ 9/ 55/50 55/50 55/50 55/50 55/ Call Toll Free 77

80 DISTILLATION HEADS 700 DISTILLING HEAD Claisen adapter sealed to a Liebig style condenser and a vacuum adapter. All joint same size with the exception of the Claisen sidearm which is 10/30 for an immersion thermometer /0 / DISTILLING HEAD Condenser jacket sealed to adapter sidearm at 75 angle /0 1/0 /0 9/ Condenser Length mm DISTILLING HEAD, SHORT PATH For use with small quantities where hold up between flask and receiver must be minimized. Top thermometer joint 10/30. Available with or without Vigreux indentations. Without Vigreux Indentations: 70 Without Vigreux Indentations: Lower Inner 1/0 /0 9/ With Vigreux Indentations: Lower Inner 1/0 /0 9/ With Vigreux Indentations 78 Call Toll Free

81 DISTILLATION HEADS 703 DISTILLING HEAD, VIGREUX Claisen sealed to Vigreux column. 10/30 top joint for immersion thermometer /0 1/0 /0 /0 /0 9/ 9/ 9/ Column Height mm DISTILLING HEAD, VIGREUX, JACKETED Same as 703, but with vacuum jacket /0 1/0 Column Height mm DISTILLATION HEAD, VIGREUX, JACKETED, MICRO Distillation head with a condenser sealed to a jacketed Vigreux distilling column. 10/30 joint at top of column for thermometer. 1/0 lower inner joint /0 Column Height mm DISTILLATION HEAD, VIGREUX, JACKETED, MICRO Jacketed Vigreux distillation head with two 10/30 joints for immersion thermometers. Condenser is braced for strength /0 Column Height mm Call Toll Free 79

82 DISTILLATION HEADS, RECEIVERS DISTILLATION HEAD, VIGREUX, JACKETED Vacuum jacketed Vigreux distillation head with sealed on condenser and vacuum adapter braced for strength. Top outer joint 10/30 for immersion thermometer /0 1/0 /0 /0 9/ 9/ Column Height mm DISTILLING APPARATUS A compact unit for distilling small quantities in a vacuum. /0 lower inner joints and 10/30 outer joint at top of column for thermometer Column Height mm DISTILLING RECEIVER, MOISTURE TEST, BARRETT Used for the determination of water in petroleum or bituminous products. mm Teflon stopcock /0 1/0 1/0 /0 /0 9/ 9/ DISTILLING RECEIVER, MOISTURE TEST, BARRETT Same as 800, but with the addition of an overflow tube. mm Teflon stopcock /0 / Call Toll Free

83 DISTILLATION RECEIVERS 80 DISTILLING RECEIVER, MOISTURE TEST, DEAN STARK Used for determining the water content of various materials /0 1/0 /0 /0 9/ 9/ DISTILLING RECEIVER, MOISTURE TEST, DEAN STARK Same as 80, but with the addition of an overflow tube /0 1/0 /0 / DISTILLING RECEIVER, MOISTURE TEST, MODIFIED DEAN STARK Same as 80, but with the addition of a 10/30 outer joint at top of vapor tube for thermometer /0 / DISTILLING RECEIVER, MOISTURE TEST Dean Stark design for solvents that are either lighter or heavier than water. Three-way Teflon stopcock. 10/30 outer joint on top of vapor tube for thermometer /0 /0 9/ Call Toll Free 81

84 DISTILLATION RECEIVERS DISTILLING RECEIVER, VACUUM, GRADUATED Distillation receiver with plain delivery tube. mm bore Teflon stopcock /0 /0 /0 9/ 9/ 9/ Subdivisions DISTILLING RECEIVER, SOLVENT RECOVERY, GRADUATED Distillation receiver with a mm three way Teflon stopcock. Upper sampling port has mm Teflon stopcock /0 /0 9/ 9/ Subdivisions DISTILLING RECEIVER, VACUUM, GRADUATED Distilling receiver with stopcocks positioned to allow removal of distillate without interrupting the distillation process. mm bore Teflon stopcock on the 50 and 100ml sizes and mm on the 50ml size /0 /0 /0 9/ 9/ 9/ Subdivisions Call Toll Free

85 DISTILLATION RECEIVERS 809 DISTILLING RECEIVER, VACUUM, GRADUATED Same as 808, but with top outer joint at a 105 angle DISTILLING RECEIVER Rotating distillation receiver allow four flasks to be progressively filled. Complete setup includes vacuum adapter, distribution adapter, four receiving flasks and ten stainless steel springs /0 /0 /0 9/ 9/ 9/ 1/0 / Receiver Flask Subdivisions Replacement s Components for 1/0 size: Vacuum Adapter Only, 1/ Distribution Adapter Only, 1/ Receiving Flasks, 15 ml, 1/ S.S. Springs, 6.35 mm, Pkg. of Replacement s Components for /0 size: Vacuum Adapter Only, / Distribution Adapter Only, / Receiving Flasks, 50 ml, / S.S. Springs, 5 mm, Pkg. of DISTILLING RECEIVER Same as 810, but with top outer joint at a 105 angle. See 810 for replacement parts /0 /0 Receiver Flask DISTILLING RECEIVER Same as 810, but with the addition of a mm bore Teflon stopcock for vacuum control. See 810 for replacement parts /0 Receiver Flask Call Toll Free 83

86 DISTILLATION RECEIVERS 813 DISTILLING RECEIVER, JACKETED Jacketed receiver with vacuum manifold for removal of sample during operation without disturbing the system. Stopcocks on manifold are mm bore, receiver stopcock is 3mm /0 /0 50 Subdivisions EVAPORATOR CONDENSERS 900 KUDERNA-DANISH CONCENTRATOR Used in the concentration of trace amounts of sample dissolved in organic solvents. Setup includes a 300mm Snyder column, Kuderna-Danish style flask and graduated concentrator tube. If ordered with hooks, setup is supplied with two springs and one # Keck clip. If ordered without hooks, set is supplied with one #19 and one # Keck clip Flask 50 Lower Tube SNYDER DISTILLATION COLUMN Standard taper /0 top outer and lower inner joints. Floating ball valves for improved vapor-liquid contact /0 Column Length mm Call Toll Free

87 EVAPORATOR CONDENSERS 901 SNYDER DISTILLATION COLUMN, ECONOMY Same as 60, but without the top /0 outer joint Column Height KUDERNA-DANISH FLASK Standard taper /0 top outer joint and 19/ lower inner joint. Available with or without hooks Flask CONCENTRATOR TUBE, GRADUATED Four use with Kuderna-Danish evaporative setups. Graduated from 0-1 in 0.1 subdivisions and -10 in 1.0 subdivisions. Available with or without hooks / 10 Subdivisions 0 to 1 in 0.1 to 10 in Call Toll Free 85

88 EVAPORATOR TRAPS ROTARY EVAPORATOR, ANTI-SPLASH TRAP Designed to prevent carry-over from foaming or bumping. Standard taper /0 top joint. Lower joint sizes listed Lower inner 1/0 /0 1/0 /0 9/ 1/0 /0 9/ /0 9/ 3001 ROTARY EVAPORATOR, ANTI-SPLASH TRAP, MODIFIED Same as 3000, but with the addition of two drain holes at the base of the inner tube to allow solvent to drain back into evaporator flask Lower inner 1/0 /0 1/0 /0 9/ /0 9/ /0 9/ 300 ROTARY EVAPORATOR, ANTI-SPLASH TRAP, FRITTED Extra coarse fritted disc between the top /0 joint and lower inner joint Lower inner 1/0 /0 9/ Call Toll Free

89 EXTRACTORS 3100 EXTRACTOR, LIQUID/LIQUID, CONTINUOUS Designed for EPA priority pollutant analysis. Accommodates 1 liter sample plus approximately 00 of extracting solvent. Standard taper /0 inner joint on the uptake tube Top Outer /0 5/ EXTRACTOR, LIQUID/LIQUID, CONTINUOUS Same as 3100, but with the addition of a mm Teflon stopcock in the return tube Top Outer /0 5/ EXTRACTOR, LIQUID/LIQUID, CONTINUOUS Similar to 3100, but with the return tube sealed into the round bottom Top Outer /0 5/ EXTRACTOR, ACCESSORY, ALLIHN CONDENSER For use with 3100, 3101, and 310 extractors /0 5/ Shown with 3100 Call Toll Free 87

90 EXTRACTORS 300 EXTRACTOR, ACCESSORY, ROUND BOTTOM FLASK For use with 3100, 3101, 310 extractors. round bottom flask with /0 joint /0 300 shown with EXTRACTION APPARATUS, SOXHLET Apparatus includes Allihn condenser, extractor and choice of flat or round bottom flask. Specifications Extractor Top Extractor I.D. (mm) Extractor () Extractor Lower Flask () Small 3/ /0 15 Medium 5/ /0 50 Complete Apparatus Small Medium Large Individual Components Description Condenser Condenser Condenser Extractor Extractor Extractor Small Medium Large Small Medium Large Flask, 15 Flask, 50 Flask, 300 Flask, 15 Flask, 50 Flask, 300 Round Bottom Round Bottom Round Bottom Flat Bottom Flat Bottom Flat Bottom 88 Call Toll Free

91 EXTRACTORS 3105 EXTRACTION THIMBLE, GLASS For use with 310 extractor Fits Extractor Small Small Medium Medium Large Large O.D. x Height mm 5 x 85 5 x x x 90 5 x x 130 Porosity Coarse X-Coarse Coarse X-Coarse Coarse X-Coarse 3105 Call Toll Free 89

92 FLASKS 300 FLASK, ROUND BOTTOM Single neck, with standard taper outer joint /0 1/0 1/0 1/0 1/0 /0 9/ 1/0 /0 9/ /0 9/ /0 9/ /0 9/ 1/0 /0 9/ /0 9/ 1/0 /0 9/ /0 9/ 5/50 /0 9/6 9/ 5/ Call Toll Free

93 FLASKS 301 FLASK, ROUND BOTTOM, LONG NECK Single long neck, with standard taper outer joint /0 1/0 1/0 /0 9/ 1/0 /0 9/ /0 9/ /0 9/ /0 9/ /0 9/ /0 9/ /0 9/ /0 9/ /0 9/ /0 9/ /0 9/ Call Toll Free 91

94 FLASKS 30 FLASK, FLAT BOTTOM Single neck, with standard taper outer joint /0 /0 /0 9/ /0 9/ /0 9/ /0 9/ 5/50 /0 9/ 5/50 /0 9/ 5/ Call Toll Free

95 FLASKS 303 FLASK, FLAT BOTTOM, LONG NECK Single long neck, with standard taper outer joint /0 /0 /0 9/ /0 9/ /0 9/ 5/50 /0 9/ 5/50 /0 9/ 5/ FLASK, ROUND BOTTOM, - NECK Standard taper outer joints on center and vertical side neck Center Neck /0 /0 9/ /0 9/ /0 9/ /0 9/ 5/50 Side Neck /0 /0 /0 /0 /0 /0 /0 /0 /0 / Call Toll Free 93

96 FLASKS 305 FLASK, ROUND BOTTOM, -NECK Standard taper outer joints on center and angled side neck Center Neck 1/0 1/0 1/0 1/0 /0 /0 9/ 1/0 /0 9/ /0 9/ /0 9/ Side Neck 1/0 1/0 1/0 1/0 /0 /0 /0 1/0 /0 /0 /0 /0 /0 / FLASK, ROUND BOTTOM, 3-NECK Standard taper outer joints on center and vertical side necks Center Neck /0 /0 /0 /0 9/ 9/ /0 /0 9/ 9/ 3/5 3/5 5/50 /0 9/ 9/ 3/5 3/5 Side Necks /0 /0 /0 /0 /0 9/ /0 /0 /0 9/ /0 9/ /0 /0 /0 9/ /0 9/ Call Toll Free

97 FLASKS 306 CONTINUED Center Neck 5/50 5/50 /0 9/ 9/ 3/5 3/5 5/50 5/50 /0 9/ 9/ 5/50 5/50 /0 9/ 9/ 5/50 5/50 55/50 55/50 9/ 9/ 5/50 5/50 5/50 Side Necks /0 9/ /0 /0 9/ /0 9/ /0 9/ /0 /0 9/ /0 9/ /0 /0 9/ /0 9/ /0 9/ /0 9/ /0 9/ 5/ FLASK, ROUND BOTTOM, 3-NECK Standard taper outer joints on center and 0 angled side necks Center Neck /0 /0 /0 /0 9/ 9/ /0 /0 9/ 9/ Side Necks /0 /0 /0 /0 /0 9/ /0 /0 /0 9/ CONTINUED NEXT PAGE Call Toll Free 95

98 96 FLASKS Call Toll Free CONTINUED Center Neck 3/5 3/5 5/50 5/50 /0 9/ 9/ 3/5 3/5 5/50 5/50 /0 9/ 9/ 3/5 3/5 5/50 5/50 /0 9/ 9/ 3/5 3/5 5/50 5/50 /0 9/ 9/ 3/5 3/5 5/50 5/50 9/ 9/ 3/5 3/5 5/50 5/50 5/50 Side Necks /0 9/ /0 9/ /0 /0 9/ /0 9/ /0 9/ /0 /0 9/ /0 9/ /0 9/ /0 /0 9/ /0 9/ /0 9/ /0 /0 9/ /0 9/ /0 9/ /0 9/ /0 9/ /0 9/ 5/

99 FLASKS 308 FLASK, ROUND BOTTOM, 3-NECK Standard taper outer joints on center and 0 angled side necks Center Neck 1/0 1/0 19/ 1/0 1/0 1/0 1/0 Side Necks 1/0 1/0 1/0 1/0 1/0 1/0 1/ FLASK, ROUND BOTTOM, -NECK Standard taper outer joints on center and vertical side necks Center Neck /0 /0 9/ 9/ 3/5 5/50 /0 9/ 9/ 3/5 3/5 5/50 5/50 55/50 /0 9/ 9/ 3/5 3/5 5/50 5/50 /0 9/ 9/ 3/5 5/50 Side Necks /0 /0 /0 9/ /0 /0 /0 /0 9/ /0 9/ /0 9/ /0 /0 /0 9/ /0 9/ /0 9/ /0 /0 9/ /0 / CONTINUED NEXT PAGE Call Toll Free 97

100 FLASKS 309 CONTINUED Center Neck 5/50 /0 9/ 9/ 3/5 3/5 5/50 5/50 55/50 Side Necks 9/ /0 /0 9/ /0 9/ /0 9/ 9/ FLASK, ROUND BOTTOM, -NECK Standard taper outer joints on center and 0 angled side necks Center Neck 1/0 1/0 1/0 1/0 1/0 Side Necks 1/0 1/0 1/0 1/0 1/ CONTINUED NEXT PAGE FLASK, ROUND BOTTOM, -NECK Standard taper outer joints on center and 0 angled side necks Center Neck /0 /0 9/ 9/ 3/5 5/50 /0 9/ 9/ 3/5 3/5 5/50 5/50 55/50 /0 9/ Side Necks /0 /0 /0 9/ /0 /0 /0 /0 9/ /0 9/ /0 9/ /0 /0 /0 Call Toll Free

101 FLASKS 311 CONTINUED FLASK, ROUND BOTTOM, -NECK Three neck flask with standard taper outer joints on center and vertical side necks. The fourth neck is a 10/30 outer joint for use with a thermometer Center Neck 9/ 3/5 3/5 5/50 5/50 /0 9/ 9/ 3/5 5/50 5/50 /0 9/ 9/ 3/5 3/5 5/50 5/50 55/50 Center Neck / /0 9/ /0 9/ 3/5 /0 9/ 3/5 5/50 /0 9/ 5/50 /0 9/ 5/50 Side Necks 9/ /0 9/ /0 9/ /0 /0 9/ /0 /0 9/ /0 /0 9/ /0 9/ /0 9/ 9/ Side Necks /0 /0 /0 /0 /0 /0 /0 /0 /0 /0 /0 /0 /0 /0 /0 / Call Toll Free 31 99

102 FLASKS 313 FLASK, ROUND BOTTOM, 5-NECK Standard taper outer joints on center and vertical side necks Center Neck /0 /0 9/ /0 9/ /0 9/ 5/50 5/50 Side Necks /0 /0 /0 /0 /0 /0 9/ /0 9/ FLASK, DISTILLING, SIDE ARM flat bottom flask with 19/38 inner joint on sidearm. Standard taper #7 stopper neck FLASK, RECOVERY Single neck flask with standard taper outer joint /0 1/0 1/0 /0 9/ 1/0 /0 9/ 1/0 /0 9/ /0 9/ /0 9/ /0 9/ Call Toll Free

103 FLASKS 316 FLASK, KJELDAHL, LONG NECK Standard taper outer joint /0 1/0 1/0 /0 /0 /0 9/ /0 9/ FLASK, ROUND BOTTOM, WITH THERMOWELL Standard taper outer joint in center and a side well to accept a thermometer /0 /0 /0 9/ /0 9/ /0 9/ Center Neck /0 9/ /0 9/ /0 9/ 5/50 /0 9/ 5/50 /0 9/ 5/50 Side Necks /0 /0 /0 /0 /0 /0 /0 /0 /0 /0 /0 /0 / FLASK, ROUND BOTTOM, 3-NECK WITH BOTTOM OUTLET Standard taper outer joints on center and side necks. mm bore Teflon stopcock Call Toll Free

104 FLASKS FLASK, ROUND BOTTOM, 3-NECK, MORTON TYPE Standard taper outer joints on center and side necks. Indentations aid in agitation when stirring. Not recommended for vacuum distillation use Center Neck /0 9/ 9/ 5/50 5/50 /0 9/ 9/ 5/50 9/ /0 9/ 9/ 5/50 5/50 /0 9/ 9/ 9/ 9/ 5/50 5/50 Side Necks /0 /0 9/ /0 9/ /0 /0 9/ /0 9/ /0 /0 9/ /0 9/ /0 /0 9/ /0 9/ /0 9/ FLASK, ROUND BOTTOM, 3-NECK, MORTON TYPE Standard taper outer joints on the center and 0 angled side necks. Indentations aid in agitation when stirring. Not recommended for vacuum distillation use Center Neck 1/0 1/0 1/0 Side Necks 1/0 1/0 1/ Call Toll Free

105 FLASKS 31 FLASK, ROUND BOTTOM, REACTION Standard taper outer joint. mm glass stopcock /0 1/0 /0 1/0 /0 /0 / FLASK, KJELDAHL, REACTION Standard taper outer joint. mm glass stopcock /0 1/0 1/0 1/0 /0 1/0 /0 / Stopcock Type Glass Glass Glass Glass Glass Glass Glass Glass FLASK, ROUND BOTTOM, 3-NECK JACKETED WITH LOWER OUTLET Standard taper outer joints on the center and vertical side necks. Bottom half of flask is jacketed with two hose connections. Available with either glass or Teflon mm bore stopcock. TEFLON STOPCOCK Center Neck /0 9/ 9/ /0 9/ 9/ /0 9/ 9/ 9/ 9/ 5/50 5/50 Side Necks /0 /0 9/ /0 /0 9/ /0 /0 9/ /0 9/ /0 9/ Call Toll Free CONTINUED NEXT PAGE 103

106 FLASKS 33 CONTINUED FROM PREVIOUS PAGE 33 FLASK, ROUND BOTTOM, 3-NECK JACKETED WITH LOWER OUTLET Standard taper outer joints on the center and vertical side necks. Bottom half of flask is jacketed with two hose connections. Available with either glass or Teflon mm bore stopcock. GLASS STOPCOCK Center Neck /0 9/ 9/ /0 9/ 9/ /0 9/ 9/ 9/ 9/ 5/50 5/50 Side Necks /0 /0 9/ /0 /0 9/ /0 /0 9/ /0 9/ /0 9/ FLASK, ROUND BOTTOM, 3-NECK, JACKETED Standard taper outer joints on center and vertical side necks. Bottom half of flask is jacketed with two hose connections Center Neck /0 9/ 9/ /0 9/ 9/ 9/ 9/ 9/ 9/ Side Necks /0 /0 9/ /0 /0 9/ /0 9/ /0 9/ Call Toll Free

107 FLASKS 35 FLASK, ERLENMEYER Standard taper outer joint /0 9/ /0 9/ /0 9/ /0 9/ FLASK, ERLENMEYER, FILTERING Standard taper outer joint and side hose connection /0 9/ /0 9/ /0 9/ /0 9/ FLASK, ERLENMEYER, WITH BAFFLES Reinforced beaded top Call Toll Free 105

108 FLASKS, FUNNELS FLASK, ERLENMEYER, WITH BAFFLES Standard taper outer joint /0 9/ /0 9/ /0 9/ /0 9/ FLASK, DEWAR Cylindrical flask, silvered and evacuated. Furnished with acrylic base Inside Diameter cm Inside Height cm FUNNELS 3300 FUNNEL, ADDITION Cylindrical funnel with pressure equalizing arm. Standard taper top outer and lower inner joints of the same size. Available with glass or Teflon stopcock. TEFLON STOPCOCK CONTINUED NEXT PAGE /0 1/0 1/0 1/0 /0 /0 /0 /0 9/ /0 9/ /0 9/ Stopcock Bore mm 6 6 Overall Height mm Call Toll Free

109 FUNNELS 3300 CONTINUED GLASS STOPCOCK /0 1/0 1/0 1/0 /0 /0 /0 /0 9/ /0 9/ /0 9/ Stopcock Bore mm 6 6 Overall Height mm FUNNEL, ADDITION, WITH JACKET Same as 3300, but with jacket for cooling with dry ice. Glass stopcock /0 1/0 /0 /0 /0 9/ /0 9/ Stopcock Call Toll Free 107

110 FUNNELS 330 FUNNEL, ADDITION Cylindrical funnel similar to 3300 with second stopcock in the pressure equalizing arm. Standard taper top outer and lower inner joints of the same size. Available with glass or Teflon stopcock. TEFLON STOPCOCK /0 /0 /0 /0 9/ /0 9/ /0 9/ Stopcock Bore MM 6 6 Overall Height MM GLASS STOPCOCK /0 /0 /0 /0 9/ /0 9/ /0 9/ Stopcock Bore MM 6 6 Overall Height MM FUNNEL, ADDITION, THREADED VALVE Cylindrical funnel with pressure equalizing arm. Standard taper top outer and lower inner joints of the same size. Teflon plug allows semi-needle valve action /0 1/0 /0 /0 /0 /0 9/ /0 9/ Valve mm mm mm mm mm mm mm mm mm Call Toll Free Overall Height MM

111 FUNNELS 330 FUNNEL, ADDITION, GRADUATED Cylindrical funnel with pressure equalizing arm. Standard taper top outer and lower inner joints of the same size. Double scale of numbers. Available with glass or Teflon stopcock. TEFLON STOPCOCK /0 /0 1/0 /0 1/0 9/ 1/0 /0 /0 9/ /0 9/ /0 9/6 9/ /0 9/ /0 9/ Stopcock Bore mm Subdivisions GLASS STOPCOCK /0 /0 1/0 /0 1/0 9/ 1/0 /0 /0 9/ Stopcock Bore mm Subdivisions CONTINUED NEXT PAGE Call Toll Free 109

112 FUNNELS 330 CONTINUED FROM PREVIOUS PAGE /0 9/6 /0 9/6 9/ /0 9/ /0 9/ Stopcock Bore mm 6 6 GLASS STOPCOCK Subdivisions FUNNEL, ADDITION, THREADED VALVE, GRADUATED Same as 3303, but with double scale of numbers /0 1/0 /0 9/ /0 9/ /0 9/ /0 9/ /0 9/ Valve mm mm mm mm mm mm mm mm mm mm mm mm Subdivisions FUNNEL, ADDITION, GRADUATED Same as 330, but with double scale of numbers. TEFLON STOPCOCK CONTINUED NEXT PAGE /0 /0 1/0 /0 1/0 9/6 1/0 /0 Stopcock Bore mm Subdivisions Call Toll Free

113 3306 CONTINUED 111 FUNNELS Call Toll Free /0 /0 1/0 /0 1/0 /0 1/0 /0 /0 9/6 /0 9/6 /0 9/6 9/ /0 9/ /0 9/ Stopcock Bore mm Subdivisions GLASS STOPCOCK /0 9/6 /0 9/6 /0 9/6 9/ /0 9/ /0 9/ Stopcock Bore mm Subdivisions TEFLON STOPCOCK

114 FUNNELS 3307 FUNNEL, SEPARATORY, SQUIBB Teflon stopcock. Includes stopper Stopcock 6 Stopper FUNNEL, SEPARATORY, GLOBE SHAPE Globe shape provides secure grip. Available with glass or Teflon stopcock Stopcock TEFLON STOPCOCK Stopper 5/50 5/50 55/ GLASS STOPCOCK Stopcock Stopper 5/50 5/50 55/ FUNNEL, SEPARATORY Cylindrical funnel with standard taper stopper top. Available with glass or Teflon stopcock Stopcock Stopper TEFLON STOPCOCK Overall Height mm Stopcock GLASS STOPCOCK Stopper Overall Height mm Call Toll Free

115 FUNNELS 3310 FUNNEL, SEPARATORY Same as 3309, but with double scale of numbers. TEFLON STOPCOCK Stopcock Stopper Subdivisions GLASS STOPCOCK Stopcock Stopper Subdivisions FUNNEL, SEPARATORY, GRADUATED Cylindrical funnel with standard taper top outer joint and lower inner joint. Graduated with double scale of numbers. Teflon stopcock /0 1/0 1/0 1/0 /0 /0 /0 /0 9/ /0 9/ Stopcock Subdivisions Call Toll Free 113

116 GAS SAMPLING 300 GAS SAMPLING TUBE For the collection and storage of gas samples. Available with glass or Teflon stopcocks. 300 TEFLON STOPCOCK Stopcock Bore mm Approx. Overall Length mm GLASS STOPCOCK Stopcock Bore mm Approx. Overall Length mm GAS SAMPLING TUBE, WITH SAMPLING PORT Same as 300, but with the addition of a syringe sampling port. Available with glass or Teflon stopcocks Stopcock Bore mm TEFLON STOPCOCK Approx. Overall Length mm GLASS STOPCOCK Stopcock Bore mm Approx. Overall Length mm GAS BALLOON Gas balloon with 0-mm high vacuum valve Call Toll Free

117 GAS SAMPLING, IMPINGERS 303 GAS SAMPLING TUBE For the collection and storage of gas samples. 0-mm Teflon valves at both ends Stopcock Bore mm Approx. Overall Length mm IMPINGER, GREENBURG-SMITH 5/50 A high velocity impinger for use in the determination of dust concentration in air or other non-condensable gases. Standard taper 5/50 joint on bottle and stopper. Approx. capacity. 303 IMPINGERS Complete Impinger with Plain Tip: Plain 18/9 5/15 Complete Impinger with Plate: Plain 18/9 5/15 Stopper only with Plain Tip: Plain 18/9 8/15 3 Stopper only with Plate: Plain 18/9 8/15 Bottle only: /50 Call Toll Free 115

118 IMPINGERS IMPINGER CONNECTOR U-shaped adapter with spherical joints at both ends /9 8/15 Center to Center mm ADAPTER, connecting adapters /9 8/15 18/9 8/15 18/9 8/15 Description 90 Probe Connector 90 Probe Connector Double L Connector Double L Connector Cyclone Bypass Cyclone Bypass 3503 BUBBLER, SMOG Standard taper /0 joint. Fritted gas dispersion tube Description Bubbler, Complete Stopper Only, /0, 1/5 Bottle Only, /0 350 GAS DISPERSION TUBE, FRITTED Porosity Fine Medium Coarse X-Coarse Call Toll Free

119 MANTLES HEMISPHERICAL-STYLE MANTLES Glas-Col hemispherical-style mantles let you easily view flask contents. This Series O mantle is a hemispherical style, meaning it covers only the bottom half of the flask. This allows full view of contents. The mantle accommodates single- and multi-neck flasks. It should be used with the Series O supports below and on the following page. Catalog 115 volt 100A A A A A A A A A A A A 016 Catalog 30 volt * * * 100A A A A A A A A A 017 Flask Flask Dia. mm s marked with an asterisk (*) are not available in 30 volt. Watts Hemispherical-Style Mantles Specifications Certification: All 115 volt items are CSA certified. Electrical: Separable -ft, -wire cord and locking connector. SPHERICAL MANTLES Glas-Col spherical mantles can help you improve safety and efficiency. This spherical mantle covers both top and bottom of 1-, -, or 3-neck spherical flasks for improved safety and efficiency. The circumferential zipper holds the halves snugly together to prevent heat loss, and the side split in top allows removal without disturbing the flask. Catalog 115 volt 100A A A A A A A A A A A A Catalog 30 volt * * * 100A A A A A A A A A Flask Distribution of Wattage lower half s marked with an asterisk (*) are not available in 30 volt. upper half None None None None None None None Call Toll Free Spherical Mantles Specifications Certification: All 115 volt items are CSA certified. Electrical: Separable -ft, -wire cord and locking connector. 117

120 MANTLES RESIN REACTION FLASK MANTLE Glas-Col resin reaction flask mantles prevent scorching. This mantle s even heat distribution prevents scorching of clear resinous materials. Its one-circuit heat input simplifies temperature control. For Corning 697 or Kimble Flask Resin Reaction Flask Mantle Catalog 115 volt 100A A A A A 0580 Catalog 30 volt 100A A A A A 0581 Flask Flask Dia. in. 3 3/ 1/ 5 1/ 5 1/ 5 1/ Mantle Depth in. 1/ 5 1/ Watts Specifications Certification: All 115 volt items are CSA certified. Electrical: Separable -ft, -wire cord and locking connector. GRIFFIN BEAKER MANTLE Glas-Col flexible mantles provide efficient heat for Griffin beakers. A resilient and pliable interior cradles fragile beakers. Even small liquid volumes may be heated in this mantle because its heat is concentrated at the bottom. 118 Griffin Beaker Mantle Specifications Certification: All 115 volt items are CSA certified. Electrical: Separable -ft, -wire cord and locking connector. Catalog 115 volt 100A A A A A A A A A A A 060 Catalog 30 volt * 100A A A A A A A A A A 061 Call Toll Free Beaker Beaker Dia. in. 1 5/8 1/ 11/ /16 3 7/8 1/ 5 1/8 5 3/ 6 3/8 s marked with an asterisk (*) are not available in 30 volt. Mantle Depth in. 1 5/8 3/8 1/ 3 1/ 3 3/ 1/ 1/ 6 6 1/ 8 Watts

121 MANTLES MINITROL Glas-Col Minitrol allows manual heat control. The operator manually adjusts the Minitrol, which has a percentage-timer design and no sensing element. It regulates mantles, tapes, and cords, as well as small furnaces, ovens, hot plates, dies, and other applications requiring stepless control. Minitrol may also be used on any non-inductive loads to its rated capacity. It proportions the operating voltage to the load from 5 1/% to 100% of the time according to the preset dial position. When turned off, it effects a positive break. For very small loads, smaller fuses may be used. PL31 Minitwin handles two separate circuits. A pilot light is connected across the output side of the control, indicating power to load. With the desired temperature determined on the initial run, a simple dial setting controls repeat operation. Catalog 10A PL31 10A PL31 10A PL3 Circuits 1 1 Volts Amps Per Circuit Wattage per circuit 00 Case Dimensions (inches) 1/ x 1/ x 5 x 1/ x 1/ x 1/ x Minitrol Specifications Certification: CSA certified. Electrical: Pilot light, fuse protection, 3 wire load receptacle, and 3-wire line cord with molded plug. Case Construction: Anodized aluminum with no-mar rubber feet. Catalog number PL31 Glas-Col Minitwin has two circuits for regulating two heating operations at once. Minitwin Call Toll Free 119

122 REACTION APPARATUS REACTION KETTLE, BODY Reaction kettle has a flat flange with o-ring groove REACTION KETTLE, BODY, JACKETED Same as 3600, but jacketed REACTION KETTLE, COVER, 3-NECK Standard taper center and side necks are 180 apart. O-ring groove. Fits and kettle bodies Center Neck /0 9/ 9/ s Side Necks /0 /0 9/ Fits 000, 3000 and 000 kettle bodies REACTION KETTLE, COVER, -NECK Standard taper center and side necks. O-ring groove. Fits and kettle bodies /0 9/ 9/ Center Neck /0 9/ 9/ Fits 000, 3000 and 000 kettle bodies /0 9/ 9/ /0 /0 9/ s Side Necks /0 /0 9/ /0 /0 9/ 10 Call Toll Free

123 REACTION APPARATUS 360 REACTION KETTLE, COVER, -NECK Standard taper center and side necks. Fourth joint is 10/30 for use with thermometer. O-ring groove. Fits and kettle bodies Center Neck /0 9/ 9/ Fits 000, 3000 and 000 kettle bodies /0 9/ 9/ s Side Necks /0 /0 9/ /0 /0 9/ REACTION KETTLE, BODY, WITH BAFFLES Reaction kettle with indentations for improved stirring. O-ring groove REACTION KETTLE, BODY, WITH BAFFLES, JACKETED Same as 3605, but jacketed CLAMP Clamp for use with reaction kettles and covers mm 1/ 5 1/ 3607 Call Toll Free 11

124 REACTION APPARATUS, PILOT PLANT REACTORS REACTION TUBE For storage or simple reactions. Standard taper outer joint. mm glass stopcock /0 1/0 1/0 /0 /0 REACTORS, PILOT PLANT 3700 PILOT PLANT REACTORS Pilot plant reactors are customized to your specific needs. Please call with your requirements and we will be pleased to help design and provide a quote for your pilot plant system Call Toll Free