VSI. Series BFII WATERWORKS. BUTTERFLY VALVES CONFORMING TO AWWA C504 Replaceable Seated 24-Inch and Greater Butterfly Valve

Size: px

Start display at page:

Download "VSI. Series BFII WATERWORKS. BUTTERFLY VALVES CONFORMING TO AWWA C504 Replaceable Seated 24-Inch and Greater Butterfly Valve"

Jocelin Ellis
6 years ago
Views:

1 M M Series BFII BUTTERFLY VALVES CONFORMING TO AWWA C504 Replaceable Seated 24-Inch and Greater Butterfly Valve Publication Issue 06/12

Flow-Thru Disc Valves are equipped with a disc that has been specially designed to flow the maximum capacity with minimal head loss.

2 Design Features General All AWWA Butterfly Valves are of the rubber-sealed tight-closing type designed to meet the latest AWWA C504 standards. All valves are cast from the correct material for line type in a thickness that exceeds the strength requirements for the associated valve classes. Flow-Thru Disc Valves are equipped with a disc that has been specially designed to flow the maximum capacity with minimal head loss. Extensive analysis and testing has been undertaken to assure that significant improvements in the valve coefficient could be achieved. The superior design of the Flow-Thru disc leaves a fraction of the surface area exposed to direct line flow compared with the traditional bowl shaped disc. Seat/Seal Detal Countinuously Adjustable Seal AWWA Butterfly Valves 24-inch and larger are equipped with a replaceable resilient seal. The seal material is customizable to the user s specifications and of an uninterrupted design to assure drip tight sealing. The seal is held in place on the body with a segmented ring and hardware made of corrosion resistant material. The seal is continuously adjustable throughout the perimeter of the valve line to assure smooth operation throughout the life of the valve. The seal can be replaced with the valve in line using only standard tooling and requiring no special training. A permanent electro-deposit welded seat is installed on the valve disc to provide maintenancefree operation for the life of the seal. Standard material is Stainless Steel 316, please inquire about additional options including Stellite and Nickel inch After Simulated Service Testing

Design Features Secured Shafts Standardized Bonnet All sizes are equipped with shafts that are mechanically secured to the disc. Positive positioning and indication is guaranteed by zero slip.

Sealing rings have been placed between line-flow and all friction reducing and drive support components.

3 Design Features Secured Shafts Standardized Bonnet All sizes are equipped with shafts that are mechanically secured to the disc. Positive positioning and indication is guaranteed by zero slip. Sealed Bushings While many manufacturers will allow the lineflow to contact bushings and bearings has chosen to isolate these components. Sealing rings have been placed between line-flow and all friction reducing and drive support components. This design feature allows a wider range of material options, increased service life, and reduces leakage possibilities. Unlike the majority of American valve manufacturers, supplies valves with standardized bonnet mounts unless otherwise specified. The use of International Organization of Standardization (ISO) or Manufacturers Standard Society (MSS) mount dimensions allows for the attachment of standardized gearboxes and operators without the need for specialized adapters. Eliminating these adapters often reduces cost, minimizes overall dimensions of the valve package, and reduces weight. Should there be a need to exchange or retrofit a newer operator this standardization expands options while reducing cost. The additional use of standardized stem diameters and key widths allows the direct mounting of many commercially available operators without any drive bush machining or adapter fabrication. Standard Bonnet EXCELLENCE IN MUNICIPAL VALVES AND AUTOMATION 3

4 Design Features Simple Packing Replacement Design Standards AWWA C504 valves use a standard ISO valve stem size. This combined with industry standard stack heights allows for the use of off-the-shelf packing. The packing gland and retention design further allows for the replacement of the packing without removing the valve from the line. In most cases the line pressure can be maintained. All service can be performed without any special training. Construction AWWA C504 ASME B16.34 API 609 Avaliable Sizes 24 and up Coatings AWWA C550 Connections ANSI B16.1 Class 125* ANSI B16.5 Class 150 ANSI/AWWA C111/A21.11 ISO 7005 Laying Length AWWA C504 Short* ISO 5752 Classifications 150A 150B* 250B Bonnet MSS SP-101* ISO 5211 Stem Diameter ISO 5211 Key Size ISO R773 *Standard Option Packing Detail 4

5 Materials Material Options Body, Bonnet, ASTM A * Caps, and Glands ASTM A126 Class B Disc ASTM A * ASTM A126 Class B Stem ASTM A * ASTM A PH Seat ASTM A * ASTM A Stellite 90% Nickel Seal EPDM* PTFE NBR FPM Bushings SS304 Reinforced PTFE* Bronze ASTM A Packing EPDM* PTFE NBR Taper Disc Pins, SS304* Retainer Segments, SS316 and Wetted Hardware Exterior Hardware Zinc Plated CS* SS304 SS316 _ O-Rings EPDM* PTFE NBR Key ASTM 1045 Please contact for Detailed Material Specifications or Additional Options *Standard Option Other Materials Avaliable Upon Request Seal Selection Guide Designation Common Name(s) Composition PTFE Teflon Polytetrafluoroethylene EPDM, EPM EPDM Ethylene-propylene- diene; Ethylene-propylene Min/Max Temperature Range -100 F/ 450 F -40 F / 300 F NBR Buna-N Nitrile-butadiene -30 F / 250 F FPM Viton Ozone (except PVC blends), ketones, esters, aldehydes, chlorinated and nitro hydrocarbons. Hexaflouropropylene- vinylidene fluoride - 10 F / 400 F General Properties Resistant to: Attacked by: Excellent abrasion resistance and chemically inert Excellent ozone, chemical, and aging resistance. Poor resistance to petroleum-based fluids. Excellent resistance to petroleum-based fluids. Good physical properties. Excellent oil and air resistance both at low and high temperatures. Very good chemical resistance. Acids, harsh inorganic and organic chemicals, oils, oxidizing agents, and solvents Animal and vegetable oils, ozone, strong and oxidizing chemicals. Many hydrocarbons, fats, oils, greases, hydraulic fluids, chemicals. All aliphatic, aromatic and halogenated hydrocarbons, acids, animal and vegetable oils. Molten alkali metals and fluorine at high temperatures Mineral oils and solvents, aromatic hydrocarbons. Ketones, low molecular weight esters and nitro containing compounds. EXCELLENCE IN MUNICIPAL VALVES AND AUTOMATION 5

6 Dimensions Please contact for Detail Drawings, Additional Sizes, and Mechanical Joint Valves Size DIN A B C D E F G 4 8 H 1 1/4-7UNC 1 1/2-6UNC 1 3/4-5UNC 2-4.5UNC 2 1/4-7UNC 2 1/2-4UNC J K L M N O P Q MOUNT FA16 FA25 FA30 FA35 FA40 FA Standard Warranty Company warrants that its valves will be free from defects in materials and workmanship under normal and customary use and maintenance for a period of (12) months from delivery acceptance, provided the valves are installed according to instructions, and applicable codes. The foregoing warranty does not cover failure of any part or parts from external forces, including but not limited to earthquake, vandalism, vehicular or other impact, and application of excessive torque to the operating mechanism or frost heave. Should any Company part or parts fail to conform to the foregoing warranty, shall, upon prompt written notice thereof, repair or replace F.O.B. point of manufacture, such defective part or parts. Purchaser shall, if requested, return the parts to, transportation prepaid. Purchaser shall bear all responsibility and expense incurred for removal, reinstallation and shipping in connection with any part supplied under the foregoing warranty. The foregoing warranty is in lieu of and excludes all other warranties not expressly set forth herein, whether express or implied by operation of law or otherwise. In no event shall Company be responsible or liable for any incidental or consequential losses, damages or expenses. 6

7 Dimensions ØF ØE Please contact for Detail Drawings, Additional Sizes, and Mechanical Joint Valves L C G x H J x ØK B ØN ØO P x ØQ A D M EXCELLENCE IN MUNICIPAL VALVES AND AUTOMATION 7

8 Valve Solutions, Inc. AWWA tel: +1 (770) fax: +1 (770) As part of a process of on-going product development, reserves the right to amend or change specifications without prior notice. Pubilished data may be subject to change. For the latest version, vist our website at

Series PVI/PVIF. Standard and Full Port Eccentric Plug Valves Conforming to AWWA C517

Series PVI/PVIF. Standard and Full Port Eccentric Plug Valves Conforming to AWWA C517 M M Series PVI/PVIF Standard and Full Port Eccentric Plug Valves Conforming to AWWA C517 Publication 517-105 Issue 11/13 Design Features Implementations The Eccentric Plug valve is the industry standard