ASSEMBLY TOOLS AND SYSTEMS. DPTC Cordless Impulse tools
|
|
- Grace Morrison
- 5 years ago
- Views:
Transcription
1 ASSEMBLY TOOLS AND SYSTEMS DPTC Cordless Impulse tools w w w. d o g a. f r
2 The range The Cordless Impulse tools with Li-ion batteries are designed for intensive industrial use. Fast and light the DPTC will increase your productivity rate and provide your operator with high operating comfort. The DPTC is also very versatile to cover various assembly joints thanks to its prograable pulse unit. Last but not least the DPTC unit features a better endurance than competiting tools thanks to its built-in gear box avoiding destructive overheat in the brushless motor! You pass where the others fail! w w w. d o g a. f r
3 DPTC Cordless Impulse tools with Li-ion batteries and Brushless motor Page 4 to 5 Page 6 to 7 DPTC Range Accessories 3
4 DPTC from 7 to 45 NM Cordless Impulse tools with brushless motor and Advanced electronic shut-off system Unequaled endurance : thanks to its built-in gear box, the DPTC tool will pass intensive production rates where the others fail! The gear box protecting the brushless motor from destructive overheats. No production stop! Optimized torque repeatability : thanks to its advanced electronic shut-off system (pulse timer) the DPTC tool will always deliver the target torque even on elastic joints. Lower maintenance cost thanks to its Brushless motor Better comfort for the operator : light and reactionless! Better assembly quality thanks to various auditive and visual assistances for the operator : LED light for dark area, OK/NOK colored LED and bip ton. 1/4 Drive Designation Voltage (V) Drive Torque (Nm) Speed (RPM) Weight (kg) without battery Code DPTC-15 HD1/4 18 1/4 Hex , DPTC-25 HD1/4 18 1/4 Hex , DPTC-35 HD1/4 18 1/4 Hex , /8 Drive Designation Voltage (V) Drive Torque (Nm) Speed (RPM) Weight (kg) without battery Code DPTC-15 SD3/8 18 3/8 Square , DPTC-25 SD3/8 18 3/8 Square , DPTC-35 SD3/8 18 3/8 Square , DPTC-45 SD3/8 18 3/8 Square , Each tool is delivered with one torque setting screwdriver, one suspension bail and one pin retainer set (for model SD3/8 only). Battery and charger are delivered independently. * 1-4 : hard joint 5-9 : semi elastic joint FLASHING YELLOW + FLASHING GREEN = REVERSE OPERATION GREEN = TIGHTENING OK RED = TIGHTENING NG FLASHING YELLOW = LOW BATTERY WARNING YELLOW = CHANGE BATTERY 4
5 DPTC Advanced brushless motor provides longer motor life and more efficiency LED indicators provides with process information Advanced and stable shut-off system Prograable LED light for working in dark area Easy impulse setting function to apply various joint types 1. Non-contact switch provides longer switch life 2. Trigger switch with variable speed control 3. Timed start trigger avoids double hit on already fastened screw Prograable reverse button Mini USB port for prograing (see page 6) Ergonomical handle design Li-ion battery : longer lifetime. No memory effect. Easy attached sliding battery system 5
6 Accessories Designation Capacity Weight (kg) Code BB 180Li-20 Li-ion Battery 2,0 Ah 0, BB 180Li-40 Li-ion Battery 4,0 Ah 0, CR19 - BTP Battery charger Designation Code 220V Power cord Torque setting screwdriver SP-18V** prograer ** Delivered with a mini USB cable. 1) Set up mode : Reverse functions (auto reverse, manual reverse, forward only) Lighting functions (set the LED light according to your needs) Buzzer alarm (set the volume according to your needs) 2) Data mode : Product ID Motor working time (H, m, s) 3) Service mode : Set up of the pulse unit maintenance period (pulse number) Total pulse number 4) Count mode : Job ok tightening Total ok tightening 6
7 Accessories 3/8 Sleeve driver sockets Type A/F Drawing D1 D2 L L2 Code D A D A D A D A D A D A 17, D B D A D A D B D C D C D C D C 27, D C Quick release adapters Type SQ input Hex. output D2 L Code D069111E08 3/8 1/ Quick release adapters Type SQ input SQ output D2 L Code D /8 1/ D /2 3/ D /8 3/ D /2 1/
8 Auto shut-off impulse tools DPTS Series, ask for catalog n w w w. d o g a. f r A SSembly T ools A n D S y STemS Auto shut-off impulse tools DPTS Series 8, avenue Gutenberg - CS Maurepas Cedex - France Tél. : Fax : export@doga.fr Nous travaillons constaent à l amélioration de nos produits. De ce fait, les dimensions et indications portées dans cette brochure peuvent parfois ne pas correspondre aux dernières exécutions. De convention expresse, nos ventes sont faites sous bénéfice de réserve de propriété (les dispositions de la loi du 12/5/80 trouvent donc toute leur application). Conception graphique : 1001Lunes Doga : S.A. au capital de e RCS Versailles B Siret NACE 4669B Doc /15 w w w. d o g a. f r
ASSEMBLY TOOLS AND SYSTEMS. DPTC Cordless Impulse tools
ASSEMBLY TOOLS AND SYSTEMS DPTC Cordless Impulse tools w w w. d o g a. f r The range The Cordless Impulse tools with Li-ion batteries are designed for intensive industrial use. Fast and light the DPTC
More informationa s s e m b l y t o o l s a n d s y s t e m s Pneumatic Screwdrivers DS Series w w w. d o g a. f r
a s s e m b l y t o o l s a n d s y s t e m s Pneumatic Screwdrivers DS Series w w w. d o g a. f r Range *DSL Series 150 W forward and reverse screwdrivers Shut-off clutch Straight, pistol, angle head
More informationASSEMBLY TOOLS AND SYSTEMS. Industrial bits
ASSEMBLY TOOLS AND SYSTEMS Industrial bits w w w. d o g a. f r Know how More than 70 years of powerbits manufacturing experience at your service. A wide range of standard and special powerbits. Quality
More informationA S S E M B L Y T O O L S A N D S Y S T E M S. Electric Screwdrivers. w w w. d o g a. f r
A S S E M B L Y T O O L S A N D S Y S T E M S Electric Screwdrivers w w w. d o g a. f r DC Controlled screwdrivers Torque Control System A new way to optimize your tightening process Error display LED
More informationA S S E M B L Y T O O L S A N D S Y S T E M S. Electric Screwdrivers. w w w. d o g a. f r
A S S E M B L Y T O O L S A N D S Y S T E M S Electric Screwdrivers w w w. d o g a. f r DC Controlled screwdrivers Torque Control System A new way to optimize your tightening process Error display LED
More informationASSEMBLY TOOLS AND SYSTEMS. Electric Screwdrivers
ASSEMBLY TOOLS AND SYSTEMS Electric Screwdrivers w w w. d o g a. f r DC Controlled screwdrivers Torque Control System A new way to optimize your tightening process Error display LED + +... = Replace up
More informationERGONOMICS AND WORKSTATIONS. Torque Reaction systems and Posi-Control systems
ERGONOMICS AND WORKSTATIONS Torque Reaction systems and Posi-Control systems w w w. d o g a. f r The range TORQUE REACTION ARMS (p.4 to 33) A comprehensive range of torque reaction systems to decrease
More informationASSEMBLY TOOLS AND SYSTEMS. Electric Screwdrivers
ASSEMBLY TOOLS AND SYSTEMS Electric Screwdrivers w w w. d o g a. f r DC Controlled screwdrivers Torque Control System A new way to optimize your tightening process Error display LED + +... = Replace up
More informationElectric. Screwdrivers
Electric Screwdrivers LOW VOLTAGE Electric screwdrivers D Series Page 3 220 Volts Direct plug-in D-180 D-180 P GA Series Page 4 Mini torque screwdrivers with controller GA-180 GA-180 P DO Series Page 5
More informationERGONOMICS AND WORKSTATIONS. Torque Reaction systems and Posi-Control systems
ERGONOMICS AND WORKSTATIONS Torque Reaction systems and Posi-Control systems w w w. d o g a. f r The range TORQUE REACTION ARMS (p.4 to 33) A comprehensive range of torque reaction systems to decrease
More information18VDC ESB6 Series Cordless Screwdrivers Operation Manual
18VDC ESB6 Series Cordless Screwdrivers Screwdriver Models : ESB6-8, ESB6-12, ESB6-15, ESB6-22 CAUTION - Please read, understand, and follow all operating and safety instructions in this manual before
More information18VDC ESB6-X Series Cordless Screwdrivers Operation Manual
18VDC ESB6-X Series Cordless Screwdrivers Screwdriver Models : ESB6-X3.5, ESB6-X3.5F, ESB6-X5F ESB6-X6, ESB6-X9, ESB6-X12 CAUTION - Please read, understand, and follow all operating and safety instructions
More informationBATTERY ASSEMBLY TOOLS
BATTERY ASSEMBLY TOOLS Introduction Battery Assembly Tools True cordless freedom Atlas Copco s range of industrial battery assembly tools includes both shut-off and transducerized nutrunners and screwdrivers.
More informationAtlas Copco Pulsor C
Atlas Copco Pulsor C More intelligence, more control THE INTELLIGENCE TO CONTROL TORQUE Pulsor C is as powerful, fast and light as a conventional pulse tool, but smart like an electric tool. The C stands
More informationDH18DSL(HX) Ì4ÇÄ_l0[:"Î. 18V Slide Rotary Hammer Specifications. Also Available Naked DH18DSL(H4)
DH18DSL(HX) 18V Slide Rotary Hammer 03387921 DH18DSL(H4) 01857564 Ì4ÇÄ_l0[:"Î 4 9 6 6 3 7 6 1 6 5 9 2 6 Impact rate SDS plus 999100 Masonry 16mm 18mm 0 750 / 0 1,500 (min-1) 0 3,100 / 0 6,200 (min-1) SDS
More informationAtlas Copco Tensor DS. Intelligence in a box
Atlas Copco Tensor DS Intelligence in a box Choose your own level of functionality The tool does the work, but the box provides the intelligence Ethernet Multiple Setting BoX BASIC Bar Code Reader Display
More informationTorqBee. EC² version with redundant measurement technology Innovation is our passion
High - System - Technik Screwdriver with torque & angle of rotation sensor Programmable screwdriver with shut-off clutch TorqBee Pistol-, straight-, and angle screwdrivers From battery screwdriver with
More informationBattery Low Reaction Tool. More Than Productivity BOOST YOUR PRODUCTIVITY BOOST YOUR FLEXIBILITY BOOST YOUR UP TIME
Battery Low Reaction Tool PRODUCTIVITY FLEXIBILITY UP TIME More Than Productivity BATTERY Focus Patented Motor Control Algorithm To reduce the reaction force OLED Display For tightening results like torque,
More informationInstruction Manual. 18V Cordless Shut-Off Impact Tool (Brushless Motor)
Instruction Manual 18V Cordless Shut-Off Impact Tool (Brushless Motor) Model Numbers SIW-P2525Q SIW-P3225Q SIW-P3238 SIW-P5538 SIW-P5550 SIW-P10050 SIW-P12050 PO Box 16460, Portland OR 97292-0460 1-800-852-1368
More informationAssembly Tools Product
CONTENTS Assembly Tools Product Line-up ASSEMBLY TOOLS Product Line-Up 2-3 Assembly Tools Benefits 4 Precision Clutch Tools 5-9 Low Torque Clutch Tool 10 Mechanical Pulse Tools 11-25 Assembly Qualifiers
More informationPanasonic Cordless Assembly Tools
1 Panasonic Cordless Assembly Tools Bringing Innovation to the Assembly Line Benefits Safer Work Environment Virtually No Torque Reaction Panasonic Mechanical Pulse Tools provide virtually no reaction
More information18V Cordless Precision Clutch Shut Off Pistol Screwdriver SPC-P2625Q SPC-P2925Q SPC-P21225Q
18V Cordless Precision Clutch Shut Off Pistol Screwdriver MODEL NO.: SPC-P2325Q SPC-P2625Q SPC-P2925Q SPC-P21225Q 2 (A) (B) (C) (D) (E) (H) (F) (G) (I) (A) 1/4" Hex with quick change chuck. (B) Covered
More informationAssembly Tools Product Line-up
CONTENTS ASSEMBLY TOOLS Product Line-Up 2-3 Assembly Tools Benefits 4 Precision Clutch Tools 5-9 Low Torque Clutch Tool 10 Mechanical Pulse Tools 11-23 Assembly Qualifiers 24-25 Assembly Tools Accessories
More informationEASY TO RUN. Road Mode Operation. Standby Mode Operation. Temperature Set-point. Defrost. Alarm display. Malfunction codes table. Unit Data.
RUN CHECK OUT THESE FUNCTIS Road Mode Operation Standby Mode Operation Temperature Setpoint CARRIER TRANSICOLD EUROPE S.C.S 0, bd de l Oise F950 CERGY PTOISE CEDEX Téléphone : + (0) 00 Fax : + (0) Defrost
More informationDC Controlled screwdrivers
4 0,3 to 9,8 NM Brushless DC motor (service free) ESD free by body grounding Torque repeatability ~ 7% Inside memory chip for tool data and recognition Built - in air clutch Angle monitoring Sequencing
More informationDC Controlled screwdrivers
DC Controlled screwdrivers HD Series 0,3 to 9,8 NM Brushless DC motor (service free) ESD free by body grounding Torque repeatability ~ 7% Inside memory chip for tool data and recognition Built - in air
More information1/4 Cordless Precise Torque Screwdrivers BFT123FZ BFT081FZ BFT040FZ. 3/8 Cordless Precise Torque Angle Wrenches DFL300FZ DFL300FZ
1/4 Precise Torque Screwdrivers DFT022FZ DFT044FZ BFT084FZ DFT126FZ Built in LED to illuminate tight spaces Extremely compact and lightweight for outstanding ergonomics Capacities On board LED and audible
More informationPRODUCTION & ASSEMBLY PRODUCT CATALOG
PRODUCTION & ASSEMBLY PRODUCT CATALOG WHY MAKITA INNOVATIVE CORDLESS TECHNOLOGY CORDLESS? Makita designs and manufactures innovative cordless tools utilizing the latest advanced technology that allows
More informationCESL8 SERIES PREMIUM BRUSHLESS, SHUT-OFF CLUTCH 32VDC Electric Screwdrivers
DELTA REGIS Tools Inc. CESL8 SERIES 32VDC BRUSHLESS SCREWDRIVERS CESL8 SERIES PREMIUM BRUSHLESS, SHUT-OFF CLUTCH 32VDC Electric Screwdrivers The Delta Regis CESL8 Series Premium Brushless Screwdrivers
More information35 Series Screwdrivers
Parts Manal 823121EN 35 Series Screwdrivers For additional product information visit our website at http://www.apextoolgroup.com 823121EN Cleco Description Language Version: This Parts Manual is the Original
More informationIQ V12 Series Cordless Tools
IQ V12 Series Cordless Tools Less is more. www.ingersollrandproducts.com/iqv12 1 Big Versatility in Smaller Packages. The new IQ V12 Series of 12-volt tools from Ingersoll Rand offers versatile performance,
More informationDistributed by. Toll Free Series PNEUMATIC PRECISION TIGHTENING SOLUTIONS
Distributed by Toll Free 1 800 563 1293 19 Series PNEUMATIC PRECISION TIGHTENING SOLUTIONS ACCURACY. DURABILITY. PRODUCTIVITY. 19 SERIES AIR FASTENING TOOLS P OR T PISTOL S C R E W D R I V E R S P-Handle
More informationWorld s first! The first battery with Wireless Charging System EXACT. Cordless and electric screwdrivers for industry.
World s first! The first with Wireless Charging System EXACT Cordless and electric screwdrivers for industry www.boschrexroth-us.com 2 Cordless and electric screwdrivers for industry Cordless and electric
More informationIndustrial & Production Tools
Industrial & Production Tools 2014-2015 Technical Symbols Tools Performance Classification HHH Super-duty tools These tools are designed to tackle the most extreme jobs. Advanced technology gives these
More informationA c h i e v i n g A s s e m b l y E x c e l l e n c e
A c h i e v i n g A s s e m b l y E x c e l l e n c e AIMCO For over 40 years AIMCO has been working with manufacturers around the world, we are the complete global source for all assembly, fastening,
More informationINSTALLATION INSTRUCTIONS LED RETROFIT ASSEMBLY (LRA) Rev F
SAFETY S IMPORTANT SAFETY INFORMATION SUITABLE FOR DRY OR DAMP LOCATIONS. NOT FOR USE WITH PHASE CUT DIMMERS. Risk of shock. Disconnect power before installation. DANGER CONVIENT AUX EMPLACEMENTS HUMIDES.
More informationCordless Tools Lithium-ion Technology
22 Professional Blue Power Tools for Trade & Industry Cordless Tools Lithium-ion Technology 00% drill/driver at half the size Only half the size of a 2-volt standard cordless drill/driver Professional
More informationLED DayLite Micro. User Guide Ver
LED DayLite Micro User Guide Ver. 10.17 CONTENTS Indications for Use... 4 Device Description... 4 Device Diagrams... 5 Directions for Use... 7 Charging the Battery... 6 Using the Headlight... 9 Understanding
More informationAtlas Copco Tensor DS. Intelligence in a box
Atlas Copco Tensor DS Intelligence in a box Smart tools for your simple transition Tensor DS helps your operators to be certain Intelligence in a box takes your production to a higher level Today, leading
More informationBATTERY - CHARGING TECHNOLOGY
cordless tools BATTERY - CHARGING TECHNOLOGY FASTER CHARGING, LONGER LASTING When it comes to our new cordless units we have implemented the perfect partnership between the battery pack and the charger.
More informationR3130 3/8" 20V Ratchet Wrench
W3130 3/8'' 20V Ratchet Wrench 3/8" 20V Ratchet Wrench Part of the IQV20 Series of cordless tools, Convenience of Cordless. Power of air. the Ingersoll Rand 3/8" 20V ratchet wrench offers superior performance
More informationPARTS LIST FOR NO. 3 SERIES PISTOL AND T HANDLE SCREWDRIVERS
PARTS LIST FOR NO. 3 SERIES PISTOL AND T HANDLE SCREWDRIVERS NON-REVERSING HANDLE ASSEMBLY (SERIAL NO S. STARTING WITH B & D ) Fig. Part Form A278F Date 10-00/B Page 1 of 6 4. 14309 Ring O 5. 14312 Ring
More informationINSTALLATION INSTRUCTIONS LED Canopy Retrofit Kit
INSTALLATION INSTRUCTIONS LED Canopy Retrofit Kit TRMUNV065ECxyyZ TRAUNV065ECxyyZ Installation Instructions subject to change without notice. Page 1 of 8 1.0 INSTALLATION WARNINGS 1. 2. 3. 4. 5. 6. "THIS
More informationIQ V12 Series Cordless Tools
IQ V12 Series Cordless Tools Less is more. Big versatility in smaller packages. The new IQV12 Series of 12-volt tools from Ingersoll Rand offers versatile e performance, cordless convenience, e, and rugged
More information18V LXT Lithium-Ion Brushless Cordless 2-Pc. Combo Kit Model: LXT239
Close 18V LXT Lithium-Ion Brushless Cordless 2-Pc. Combo Kit Model: LXT239 Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
More informationAssembly Technologies. General Industry goes. high tech
Assembly Technologies General Industry goes high tech Intelligent Air Tools Closed-loop control and reporting AP Series Barcode information can be used to select parameter sets and store part ID with rundown
More informationMaking a Safer World Through Accuracy and Precision. Product Bulletin
Making a Safer World Through Accuracy and Precision Product Bulletin Follow us on Twitter @mountztorque PB # 0058 October 2014 www.mountztorque.com HD-Series Torque & Automation Control System The Mountz
More informationFastening Tools Lou Zampini & Associates
Fastening Tools Safety Instructions and Contents Specific Safety Instructions for Power Tool Groups In addition to the General Safety Instructions, the following are safety instructions and warnings that
More informationNL-FTPR150, FUNCTIONAL TRAINER ASSEMBLY INSTRUCTIONS
NL-FTPR50, FUNCTIONAL TRAINER ASSEMBLY INSTRUCTIONS Specifications Weight = 55 lbs Packed in 9 Boxes Box = 44.5" x.5" x 7.5" = 2.22 ft³ = 56 lbs Box 2 = 46.5" x 6" x 6.5" = 2.80 ft³ = 76.5 lbs Box = 78.5"
More informationTECHNICAL SPECIFICATIONS. AD Retarder. OC442068/a 11/2000 1
TECHNICAL SPECIFICATIONS AD 7 00 Retarder OC068/a 11/000 1 AD 7 00 General specifications Identification Code N : B E 0 AD 7 00 Variant Coupling index (see on page 5) Voltage index 1 = 1 V = V Specifications
More informationCompact, flexible, clever: One 10.8 volt battery for all tools!
Compact, flexible, clever: One 10.8 volt battery for all tools! Make it your home with the 10.8 volt cordless system from Bosch. Whether in the house or garden, the tools impress with their compact power
More informationB-0- BUNDANG TECHNO PAR, SEONGNA-SI YONGGI-DO, OREA (-0) TEL : --0- FAX : --0- B-0- BUNDANG TECHNO PAR, SEONGNA-SI, YONGGI-DO, OREA (-0) Tel : --0- Fax : --0- h t t p : / / w w w. s e h a n. c o. k r Catalog
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION Model. Description DDF481 (XFD07*1) 18V Cordless driver drill *1 Model number for USA CONCEPT AND MAIN APPLICATIONS Model DDF481 (XFD07*1) is a supreme class cordless driver drill
More informationW5130 3/8" 20V Mid-Torque Impactool
3/8'' 20V Mid-Torque Impactool 20V Mid-Torque Impactool The Ingersoll Rand 20V The Right-Sized Tool for the Job Mid-Torque Impactool delivers the power you need where you need it from the engine compartment
More informationSlam-Shut Valve OSE LS. Europe, Middle East, and Africa Document Only CONTENTS INTRODUCTION CHARACTERISTICS. Scope of Manual.
Instruction Manual NTAOSELS0401 OSE LS February 2004 - Rev 03 Slam-Shut Valve CONTENTS Introduction... 1 Characteristics... 1 Labelling... 2 Dimensions and Weights... 3 Operation... 4 Installation... 4
More information48EP Series Electronically Controlled Pistol Grip Nutrunner
Parts Manual PL2EN-48EP- 0/09/202 48EP Series Electronically Controlled Pistol Grip Nutrunner For additional product information visit our website at http://www.apextoolgroup.com PL2EN-48EP- 0/09/202 Cleco
More informationOWNER S MANUAL OM F
OWNER S MANUAL OM-2606 96 030F May 2004 Cool Runner 3X. Specifications Recirculating Coolant System For Water-Cooled GTAW Torches And GMAW Guns Use With Guns/Torches Rated Up To 600 Amperes 3 gal (.4 L)
More informationHave a Bright Day! Nicholas Harmon President, Verilux, Inc.
VF02 Dear Customer, Thank you for purchasing the Verilux EasyFlex Deluxe Natural Spectrum Floor Lamp. You have received a quality product, backed by a one year limited warranty. As a Verilux customer,
More informationBTR 170 REBEL CORDLESS RIVETING MACHINE FOR BLIND RIVET NUTS INDUSTRY 4.0. World Smartest Cordless Riveting Tool PATENTED BY OBER
CORDLESS RIVETING MACHINE FOR BLIND RIVET NUTS INDUSTRY 4.0 The smartest wireless riveting machine, ready for the industry of today and of tomorrow. Rivet nuts are used when clamping efficiency is associated
More informationBULLETIN DE DIFFÉRENCIATION DES PRODUITS IPD Mai 2011
BULLETIN DE DIFFÉRENCIATION DES PRODUITS IPD Mai 2011 Différenciation IPD : Produits IPD pour moteurs Caterpillar série «C» IPDDB-0013 Le tableau suivant illustre la large gamme de pièces détachées d IPD
More informationCordless Systems. Cordless Systems. Hilti. Outperform. Outlast.
Cordless Systems Hilti. Outperform. Outlast. 52 Introduction Introduction Page 54-55 Drill drivers Cordless compact drill driver SFC 22-A Page 56 Cordless hammer drill driver SFH 22-A Page 57 Accessories
More informationUB-2 2 Universal Button
UB-2 2 Universal Button UB-2/LTUL Universal Button with Latching Timer ADA Compliant For UB-2/LTUL the enclosed timer is to be used and installed per the enclosed LT-1UL installation sheet. For access
More informationNT-500 Technical Support Guide. For use by qualified company approved Technicians
NT-500 Technical Support Guide For use by qualified company approved Technicians INTRODUCTION The NT-500 is designed to offer the full range of features required to perform radiofrequency denervation The
More informationMobile Crane/Grue mobile LTM
Mobile Crane/Grue mobile LM 1090-4.2 Preliminary Préliminaire ALL-ROUNDER Ready for anything max ft 110 USt 197 ft 203 ft ft 249 ft Mobile Crane/Grue mobile LM 1090-4.2 197 ft NZK K 31 ft 52 ft m 8.4 ft
More informationINSTALLATION INSTRUCTIONS MOONRING 1 LP1/MR1
INSTALLATION INSTRUCTIONS MOONRING 1 LP1/MR1 Suspended, Ceiling LED n A 1035 22nd Avenue, Unit 1 Oakland, CA 94606 P 510.489.2530 E TalkToUs@alwusa.com W alwusa.com Safety & Warnings! 1. Read all instructions.
More informationTABLE OF CONTENTS. Auto Shut-Off 12V Electric Screwdrivers Nm ( in-lbs)
TABLE OF CONTENTS 3 4 6 Auto Shut-Off 12V Electric Screwdrivers.1.34 Nm (.7 3.8 in-lbs) Auto Shut-Off 32V Electric Screwdrivers.2 2.94 Nm (.2 26. in-lbs) 7 Slow Start & I/O Control Modules 8 Counting Controllers
More information48EP Series Electronically Controlled Pistol Grip Nutrunner
Parts Manual PL2EN-8EP /0/20 8EP Series Electronically Controlled Pistol Grip Nutrunner For additional product information visit our website at http://www.apextoolgroup.com PL2EN-8EP /0/20 Cleco General
More informationLED DayLite WireLess Mini
LED DayLite WireLess Mini User Guide Ver. 10.17 Contents Indications for Use... 3 Device Description... 3 Device Diagrams... 4 Directions for Use... 6 Charging the Batteries... 6 Using the Headlight...
More informationLIGHTER FASTER STRONGER
PRECISION BOLTING FOR OVER 20 YEARS LIGHTER FASTER STRONGER METRIC PRODUCT CATALOGUE RAD TORQUE SYSTEMS DB-RAD BATTERY SERIES RAD SINGLE SPEED RAD TV SERIES Precision Bolting for 4 RAD TORQ TABLE OF CONTENT
More informationCordless Systems. Cordless Systems. Hilti. Outperform. Outlast. Cordless. Systems
Hilti. Outperform. Outlast. 49 Introduction Introduction Page 51-52 Drill drivers compact drill driver SFC 22-A Page 53 hammer drill driver SFH 22-A Page 54 Accessories for drill drivers Page 57 Impact
More informationBosch Home Exclusive Line
Bosch Home Exclusive Line Make it your home with the Bosch Home Exclusive Line. With Bosch s DIY power tools you always have the right tool at hand for your projects at home. Make it your home. All DIYers
More informationBest ergonomics for perfect power transfer.
Relax and work. Relax and enjoy. Best ergonomics for perfect power transfer. Compact design and powerful EC-motor for effortless screwdriving and drilling. The new tools in the Ergonomic-Series with Syneon
More informationINSTALLATION INSTRUCTION Bollard Light 12V
Bollard Light 12V 6611/6621/6631/6641/6651 SAFETY INSTRUCTION IMPORTANT: NEVER attempt any work without shutting off the electricity. Read all instructions before installing. System is intended for installation
More informationMaximum accuracy, minimum maintenance. Brushless electric screwdrivers
Maximum accuracy, minimum maintenance. Brushless electric screwdrivers CESL, ESL, ICESL Pistol grip models ESP Torque : from 0,02 up to 8 Nm Automatic current shutoff Batch counting Brushless electric
More informationScrewdrivers. Choosing the right Screwdriver. Tool selection
RediPower Choosing the right Screwdriver Tool selection Type of fastener/component Joint integrity Torque required Tool orientation and ergonomics Productivity POSSIBLE USE OF SCREWS TYPE OF CLUTCH START
More informationAutomatic Industrial Cordless Brushless Power Torque Screwdrivers Series
Automatic Industrial Cordless Brushless Power Torque Screwdrivers Series OPERATION AND MAINTENANCE MANUAL SKC-PTA-220B SKC-PTA-220W SKC-PTA-150B SKC-PTA-150W SKC-PTA-120B SKC-PTA-80B SKC-PTA-50B CAUTION!!
More informationVERSIONS OPTION 1 OPTION 2 OPTION 3 OPTION 4 OPTION 5
ESP Range ESP7 controller for SLE screwdrivers Remote interface port (options 2,3,4,5) Switchable supply voltage AC230, 50Hz or AC120, 60Hz 3 Button keypad for simple programming LCD Display for programming
More informationLiveWire and the New LiveWire 2 Dualband 2.4 & 5 GHz WLAN Tools
Durable Production Performance Cordless for Safety Critical Joints LiveWire and the New LiveWire 2 Dualband 2.4 & 5 GHz WLAN Tools The New LiveWire 2 Cordless Tools From Cleco Light, Intelligent. All The
More informationELECTRICS FORKLIFT TRUCK
HANDLING SOLUTION ELECTRICS FORKLIFT TRUCK SERIES ME POP 3 & 4 wheels - 1,5 to 3,0 t Manitou, YOUR INDUSTRIAL PARTNER! A global group A global handling benchmark, the MANITOU group designs, assembles and
More informationSunFounder 250+Radiolink T8FB Remote Controller(Assembled)
SunFounder 250+Radiolink T8FB Remote Controller(Assembled) From Wiki Contents 1 Introduction 2 Features 3 Components Test Before Assembly 3.1 1. Battery, Balance Charger and Power Adapter Test 3.2 2. Battery
More informationPRODUCT INFORMATION. 18V Cordless Hydraulic Crimping Tool B1300-C. Ref.: I.P. 436/E Date: 23 October 2014 Pag.: 1 of 5
PRODUCT INFORMATION Ref.: I.P. 436/E Date: 23 October 2014 Pag.: 1 of 5 18V Cordless Hydraulic Crimping Tool B1300-C Cembre presents B1300-C, the lunch box shaped C head tool in its new generation of cordless
More informationScrewdrivers - Shut off - Push start
Screwdrivers - Shut off - Push start 0.09 to 16 Nm (0.8 to 142 in.lb) - 320 to 3500 rpm B C D E F Model ø mm (in.) ø B mm (in.) L mm (in.) 289.. 27 (1.06) 178 (7) SB.. 32 (1.26) 36 (1.42) 197 (7.76) SC2
More informationCan handle more than 1 million screw connections.
INTERIOR Can handle more than 1 million screw connections. FEIN drywall screw gun available as battery- or mains-powered tool. Brushless FEIN PowerDrive motor New from the drywall construction professionals:
More informationINSTALLATION INSTRUCTIONS LIGHTPLANE 3.5. LP3.5 Suspended LED. A nd Avenue, Unit 1. CA P E W alwusa.
Oakland, INSTALLATION INSTRUCTIONS LIGHTPLANE 3.5 LP3.5 Suspended LED A 1035 22nd Avenue, Unit 1 n CA 94606 P 510.489.2530 E TalkToUs@alwusa.com W alwusa.com Safety & Warnings! 1. Read all instructions.
More informationUK RANGE CATALOGUE NEW 2016 RANGE
UK RANGE CATALOGUE 2016-17 NEW 2016 RANGE POWER TOOLS STATIONARY GARDEN TOOLS ACCESSORIES Purchase as a kit...or buy separately OUR ONE BATTERY FITS ALL FAMILY > > SAVE s > > SAVE s + + POWERS 14 POWER
More informationINSTALLATION INSTRUCTIONS SUPERPLANE 2.5. Suspended. A nd Avenue, Unit 1 Oakland, CA P E W alwusa.
INSTALLATION INSTRUCTIONS SUPERPLANE 2.5 Suspended A 1035 22nd Avenue, Unit 1 Oakland, CA 94606 P 510.489.2530 E TalkToUs@alwusa.com W alwusa.com SP2.5S - Safety & Warnings! 1. Read all instructions. 2.
More informationINSTALLATION INSTRUCTION Aether 2 Shallow Recessed Housing
SAFETY INSTRUCTIONS IMPORTANT: NEVER attempt any work without shutting off the electricity. Read all instructions before installing. System is intended for installation by a qualified electrician in accordance
More informationDJS for PST (Pulse Static Transducer)
Printed matter 6159924460 Issue No. 01 Date 01/2018 Page 1 / 10 DJS for PST (Pulse Static Transducer) Valid from Serial No. 26011800606 DJS for PST (Pulse Static Transducer) Download the latest version
More informationINSTRUCTION MANUAL. MODEL No: FLEXC-3PX FLEXC-8PX FLEXC-11PX FLEXC-12PX 10.8V Cordless Shut-off Screwdriver.
a) Torque adjustment cover b) 1/4" F/Hex with quick change chuck c) LED indicator provides simple process information to the operator d) LED light for working in dark area e) Press button for easy Forward/Reverse
More informationAssembly Tools. FUJI TOOLS - THE BEST OF THE BEST - Need to know more? : 5
6 Pulse Wrenches Shut-off type 11 Geared Pulse Wrenches Shut-off type 13 Pulse Wrenches 14 Impact Wrenches 17 Screwdrivers 22 Open-end Wrenches / Ratchet Wrenches 24 Accessories 25 FUJI TOOLS - THE BEST
More informationKUBOTA MINI EXCAVATOR
KUBOTA MINI EXCAVATOR Powerful & Versatile Combining the power for demanding jobs and the versatility to work in any condition, the Kubota U55-4 is ready to take on any challenge. This advanced 5.4 tonne
More informationFITTING INSTRUCTIONS FOR CP0404BL/WH NO-CUT AERO CRASH PROTECTORS HUSQVARNA 701 ENDURO/SUPERMOTO 2016-
FITTING INSTRUCTIONS FOR BL/WH NO-CUT AERO CRASH PROTECTORS HUSQVARNA 701 ENDURO/SUPERMOTO 2016- Page 1 PICTURE A PICTURE B REAR OF BIKE FRONT OF BIKE PICTURE C THIS KIT CONTAINS THE ITEMS PICTURED AND
More information(1) Ce dispositif ne devrait pas causer des interférences nuisibles.
AVERTISSEMENT: Des changements ou modifications non-expressement approuvés par les parties responsables de cette conformité peuvent annuler l autorisation d opérer ce dispositif. Ce dispositif est conforme
More informationQE2 Series. DC Electric Screwdrivers
DC Electric Screwdrivers Being a premier supplier of Assembly Solutions to leading global manufacturing companies requires a consistent focus on innovation. The latest result of Ingersoll Rand s focus
More informationKUBOTA MINI EXCAVATOR
KUBOTA MINI EXCAVATOR Spacious & Comfortable On the KX057-4, your comfort truly comes first. The luxurious cabin features a wider entrance, generous legroom and a deluxe seat. The Roll-over Protective
More informationKUBOTA MINI EXCAVATOR
KUBOTA MINI EXCAVATOR Powerful & Versatile Combining the power for demanding jobs and the versatility to work in any condition, the Kubota U48-4 is ready to take on any challenge. This advanced 4.7 tonne
More informationTechnical Guide TG-19-C-074-E A CALIBRE Thermo-compensated
Technical Guide TG-19-C-074-E A Produced by : selrom Date : 19.07.2011 CALIBRE 5666 Version A 15 Ø 34.60 mm P4 P1 P3 P2 Version Thermo-compensated Height of movement 13.30 mm Number of jewels 9 Exclusive
More informationCTX 3 Control relays Cat. N (s) : /06/09..14/16/19..24/26/29
87045 LIMOGES Cedex Telephone: +33 5 55 06 87 87 FAX: +33 5 55 06 88 88 CTX 3 Control relays Cat. N (s) : 4 168 00..04/06/09..14/16/19..24/26/29 CONTENTS PAGES 1. Description - Use... 1 2. Range... 1 3.
More informationDRILLING AND SCREWDRIVING. Product range. Tools for the toughest demands
DRILLING AND SCREWDRIVING Product range Tools for the toughest demands Most cordless tools are simple everyday objects. A Festool drill, however, is something unique. A cordless drill has certain basic
More informationSolid Clamps Raccords orientables
Solid Clamps Raccords orientables Versions: Raccords orientables Éléments monoblocs Pour un montage plus rapide et économique Série industrie Fonte d aluminium Grande diversité Éléments monoblocs Éléments
More information