TABLE OF CONTENTS. Auto Shut-Off 12V Electric Screwdrivers Nm ( in-lbs)

Size: px

Start display at page:

Download "TABLE OF CONTENTS. Auto Shut-Off 12V Electric Screwdrivers Nm ( in-lbs)"

Stewart Robbins
5 years ago
Views:

2 TABLE OF CONTENTS Auto Shut-Off 12V Electric Screwdrivers.1.34 Nm ( in-lbs) Auto Shut-Off 32V Electric Screwdrivers Nm ( in-lbs) 7 Slow Start & I/O Control Modules 8 Counting Controllers Torque Meters KTM-15, KTM-15, KTM Nm ( in-lbs) 32V/4VDC Brushless Drivers with Internal Counters Nm ( in-lbs) Auto Shut-Off 115V Electric Screwdrivers Nm ( in-lbs) Screw Feeders For Manual Pickup & Automation Tool Support Torque Arms, Tool Stand, Spring Balancers 2

BRUSHLESS AUTO SHUT-OFF 12V ELECTRIC SCREWDRIVERS Torque Range:.1.34 Nm (.7 3.

Selections Available Start, Push Button Reverse ESD Housing Includes 2 Meter Tool Cable, Driver Bits (PH), and Torque Fixing Ring Bit Holder Accepts 4mm Round Winged Bits (2

SKP-12HL Dimensions (mm) Bits Included SKD-B1L/LS4 PH#, # SKD-B13L/LS4 PH#, #1 Torque Fixing Ring Accessories 2m, 3-Pin Cable Spring Balancer N.m.4.3 Torque Range Chart.34.2.1 SKD-B13L/LS4 SKD-B1L/LS4.

3 BRUSHLESS AUTO SHUT-OFF 12V ELECTRIC SCREWDRIVERS Torque Range:.1.34 Nm ( in-lbs) Features: Consistent Torque Output Torque Accuracy ±5%* Clean, Brushless Motor Technology Dependable, Long Lifespan Requires 12VDC Power Supply ( SKP-12HL) Two Speed Selections Available Start, Push Button Reverse ESD Housing Includes 2 Meter Tool Cable, Driver Bits (PH), and Torque Fixing Ring Bit Holder Accepts 4mm Round Winged Bits (2 Included) *Factory test values actual torque results may vary depending on the specific application, operator input, and test equipment used. SKP-12HL Dimensions (mm) Bits Included SKD-B1L/LS4 PH#, # SKD-B13L/LS4 PH#, #1 Torque Fixing Ring Accessories 2m, 3-Pin Cable Spring Balancer N.m.4.3 Torque Range Chart SKD-B13L/LS4 SKD-B1L/LS4.15 SKD-B1 Series KC-9S AA51-27N KL-6 (ESD Housing) Torque (Nm) Torque (in-lbs) Specifications Speed (rpm) SKD-B1L-ESD /7 SKD-B1LS4-ESD /2 SKD-B13L-ESD /7 SKD-B13LS4-ESD /2 Start Type Power Consum. 15W Weight 17g.4lbs Use with Power Supply SKP-12HL 3

BRUSHLESS AUTO SHUT-OFF 32V ELECTRIC SCREWDRIVERS Torque Range:.2 2.94 Nm (.2 26.

Standard or ESD Housing Material Includes 2 Meter Tool Cable, Driver Bits (PH), and Torque Fixing Ring *Factory test values actual torque results may vary depending on the specific application,

4 BRUSHLESS AUTO SHUT-OFF 32V ELECTRIC SCREWDRIVERS Torque Range: Nm ( in-lbs) Features: Consistent Torque Output Torque Accuracy ±3%* Clean, Brushless Motor Technology Dependable, Long Lifespan Requires 32VDC Power Supply Two Speed Selections Available or Push Start s Standard or ESD Housing Material Includes 2 Meter Tool Cable, Driver Bits (PH), and Torque Fixing Ring *Factory test values actual torque results may vary depending on the specific application, operator input, and test equipment used. Bits Included SKD-B2 PH#, #, #1 SKD-B5 PH#1, #2 SKD-B7 PH#2 (x2) 1/4 HEX BIT HOLDER Torque Range Speed Start (Standard Housing) (w/esd Housing) Nm in-lbs (rpm) Type SKD-BN23L SKD-BN23L-ESD 1/ SKD-BN23LS5 SKD-BN23LS5-ESD 5/35 SKD-BN27L SKD-BN27L-ESD /7 SKD-BN21L SKD-BN21L-ESD /7 SKD-BN512L SKD-BN512L-ESD 1/ SKD-BN512LF SKD-BN512LF-ESD 2 SKD-BN512P SKD-BN512P-ESD 1/ Push SKD-BN512PF SKD-BN512PF-ESD 2 SKD-BN517LF SKD-BN517LF-ESD SKD-BN517PF SKD-BN517PF-ESD Push SKD-BN519L SKD-BN519L-ESD /7 SKD-BN519P SKD-BN519P-ESD Push SKD-BN722LF SKD-BN722LF-ESD SKD-BN722PF SKD-BN722PF-ESD Push SKD-BN73L SKD-BN73L-ESD /9 SKD-BN73P SKD-BN73P-ESD Push Power Consum. 25W 55W 55W Weight 385 g.8 lbs 52 g 1.1 lbs 8 g 1.8 lbs Power Supply SKP-32BC-6W SKP-BE32HL Use with driver models Input Output SKD-BN2_L SKD-BN5_L/P SKD-BN5_LF/PF SKD-BN7_L(F)/P(F) 1 24VAC 5/6Hz 24/32VDC Dimensions 145 x 6 x 35 mm 195 x 76 x 56 mm Weight 25g /.6lbs 45g / 1lbs 4 POWER SUPPLY CONVERTS AC INPUT TO 32VDC REQ D TO PROPERLY POWER TOOL (cetlus LISTED)

Torque (N m) 1..75.5.25 SKD-BN21L SKD-BN27L SKD-BN23L/LS5.98.69.34 Torque (N m) 2. 1.5 1..5 SKD-BN519L/P SKD-BN512P/PF SKD-BN517LF/PF SKD-BN512L/LF 1.86 1.67 1.18 4. Torque (N m) 3. 2. 1. SKD-BN73L/P SKD-BN722LF/PF 2.

5 Torque (N m) SKD-BN21L SKD-BN27L SKD-BN23L/LS Torque (N m) SKD-BN519L/P SKD-BN512P/PF SKD-BN517LF/PF SKD-BN512L/LF Torque (N m) SKD-BN73L/P SKD-BN722LF/PF BN2 BN5 BN7 Dimensions (mm) Accessories Torque Fixing Ring Torque Adjust Tool Suspension Rack Spring Balancer SKD-BN2 L SKD-BN2 L-ESD SKD-BN5 L(F) SKD-BN5 L(F)-ESD SKD-BN5 P(F) SKD-BN5 P(F)-ESD SKD-BN7 L(F) SKD-BN7 L(F)-ESD SKD-BN7 P(F) SKD-BN7 P(F)-ESD KC-13C KC-13S KC-6C KC-6S KC-6C KC-6S KC-2 KC-2S KC-2 KC-2S KW-4 KH-5 KL-6 KW-3 KW-1 KH-4 (KH-2 when using torque fixing ring) KH-2 KL-12 5

REPLACEMENT TOOL CABLES (2M CABLE INCLUDED W/ DRIVER) 2m 3m 3m coiled 6m

Housing) -RA RIGHT ANGLE LEVER START DRIVERS Torque Range Nm in-lbs Speed

3 SKD-BN512LF-RA SKD-BN512LF-ESD-RA 2 SKD-BN517LF-RA SKD-BN517LF-ESD-RA.2 1.

6 1/7 SKD-BN722LF-RA SKD-BN722LF-ESD-RA.34 1.51 3. 13.

2 1/7 Angle Head Part # KL-2 KL-1 Power Consum. 55W Weight 77 g 1.

6 REPLACEMENT TOOL CABLES (2M CABLE INCLUDED W/ DRIVER) 2m 3m 3m coiled 6m AA51-56 AA51-44 AA51-15 AA51-45 AA51-56 AA51-15 (Standard Housing) (w/esd Housing) -RA RIGHT ANGLE LEVER START DRIVERS Torque Range Nm in-lbs Speed (rpm) SKD-BN512L-RA SKD-BN512L-ESD-RA 1/ SKD-BN512LF-RA SKD-BN512LF-ESD-RA 2 SKD-BN517LF-RA SKD-BN517LF-ESD-RA SKD-BN519L-RA SKD-BN519L-ESD-RA /7 SKD-BN722LF-RA SKD-BN722LF-ESD-RA SKD-BN73L-RA SKD-BN73L-ESD-RA /7 Angle Head Part # KL-2 KL-1 Power Consum. 55W Weight 77 g 1.7 lbs 15 g 2.3 lbs Angle Head Dimensions (mm) Torque (N m) SKD-BN519L-RA SKD-BN517LF-RA SKD-BN512L/LF-RA Torque (N m) SKD-BN73L-RA SKD-BN722LF-RA

SLOW START & I/O CONTROL MODULES Features: Adjustable slow start speed, which can be set to one of ten values (L L9) from 3% to 1% of full speed Slow start time can be set up to 9.

BN series power controller Automatic bypass of slow start function when tool is in reverse Manual bypass switch will disable slow start function if required KL-SCBSN includes a 3M long

mm 2.3 x 3.7 x 1.4 in 4.1 x 3.9 x 1.3 in Weight 13 g /.3 lbs 18 g /.

7 SLOW START & I/O CONTROL MODULES Features: Adjustable slow start speed, which can be set to one of ten values (L L9) from 3% to 1% of full speed Slow start time can be set up to 9.9 seconds Provides three available outputs: tool running, clutch activated and tool in reverse (MOS relay switches) Installs in-line between a Kilews SKD-BN series 32VDC screwdriver and a BN series power controller Automatic bypass of slow start function when tool is in reverse Manual bypass switch will disable slow start function if required KL-SCBSN includes a 3M long shielded tool cable to use in place of the unshielded cable included with the screwdriver KL-SSBN KL-SCBSN Specifications KL-SSBN KL-SCBSN Dimensions (L x W x H) 58 x 95 x 35 mm 13 x 1 x 32 mm 2.3 x 3.7 x 1.4 in 4.1 x 3.9 x 1.3 in Weight 13 g /.3 lbs 18 g /.4 lbs Compatible Tools SKD-BN Series Screwdrivers Available Inputs Remote Start, Remote Reverse, Remote Enable / Disable Available Relay Outputs Tool Running, Clutch Activated, Tool in Reverse Slow Start Time s. 9.9 s Slow Start Speed 3% 1% + + SKD-BN Series 32V Screwdriver Slow Start Module 7 BN Series Power Controller

SKP-BC32HL-1 COUNTING CONTROLLER Features: Compatible with SKD-BN2, -BN5, and -BN7 series tools Selectable slow start speed and time Large LED display shows screw count values Externally accessible

Optional timed auto-reverse for applications requiring back-out after fastening Locks to limit access to program modifications CE / RoHS / ETL compliant Includes a 3M long shielded tool cable to use

A simple program loop provides access to settings for slow start speed and time, batch count quantity, and min/max allowable rundown times.

parameters that have been programmed into the controller. Specifications SKP-BC32HL-1 Compatible s SKD-BN2, SKD-BN5, SKD-BN7 Dimensions (L x W x H) 2 x 13 x 1 mm 7.9 x 5.1 x 3.9 in Weight 1.6 kg / 3.

8 SKP-BC32HL-1 COUNTING CONTROLLER Features: Compatible with SKD-BN2, -BN5, and -BN7 series tools Selectable slow start speed and time Large LED display shows screw count values Externally accessible I/O connections Programmable batch counting with audible buzzer indicating batch complete Programmable time window for comparison with actual fastening cycle time LEDs indicate OK/NG rundown cycle Optional timed auto-reverse for applications requiring back-out after fastening Locks to limit access to program modifications CE / RoHS / ETL compliant Includes a 3M long shielded tool cable to use in place of the unshielded cable included with the screwdriver Parameters are set up on the SKP-BC32HL-1 using the four button keypad and LED display panel. A simple program loop provides access to settings for slow start speed and time, batch count quantity, and min/max allowable rundown times. During normal operation, the large two-digit display shows the current screw count value and also provides LED indication of whether the rundown was good (OK) or no good (NG) based on the time window parameters that have been programmed into the controller. Specifications SKP-BC32HL-1 Compatible s SKD-BN2, SKD-BN5, SKD-BN7 Dimensions (L x W x H) 2 x 13 x 1 mm 7.9 x 5.1 x 3.9 in Weight 1.6 kg / 3.5 lbs Input Voltage 1 24VAC, 5/6Hz, 1.2A Output Voltage 32/24VDC, 6W Outlets 1 Count (per batch) 1 99 fasteners Speeds Hi / Lo External Inputs Remote Start / Reverse / Disable / Confirm / Enable / Clear External Outputs OK / NG / OK ALL Slow Start Time. 9.9 s Slow Start Speed 3% 1% Approvals CE / RoHS / ETL 8

TORQUE METERS: KTM-15, KTM-15, KTM-25 Features: Ideal for electric screwdrivers Easy to set-up and use Comes with a certificate of calibration Data export via USB 1.

9 TORQUE METERS: KTM-15, KTM-15, KTM-25 Features: Ideal for electric screwdrivers Easy to set-up and use Comes with a certificate of calibration Data export via USB 1. (cable not included) Stores up to 8 readings Selectable measuring units: Lbf.In, Kgf.cm, Nm Portable Rechargeable battery Long life KTM-15 Auto zero feature Program high and low torque limits Display readings/statistics Minimum, Maximum and Average Torque for a group of rundowns Select between peak, real time, and peak down (initial peak) measuring modes Measures both clockwise and counterclockwise torque Includes an AC charger and rundown joints, all in a protective carrying case Specifications KTM-15 KTM-15 KTM-25 kgf.cm Measuring Ranges lbf.in N.m Accuracy ±.5% (or ±1 digit) Power Supply 4 x 1.2V Battery Charging Time Within 3 hours Continuous Operation At Full Charge Approx. 12 hours Battery Rechargeable ~3 times, depending on conditions Dimensions (L x W x H) 23 x 125 x 65 mm 23 x 125 x 65 mm 21 x 16 x 45 mm Weight 1.8 kg / 4 lbs 1.8 kg / 4 lbs 2. kg / 4.4 lbs Special Charger Input AC1 24V, 5/6Hz Output DC12V 4mA Included Test Joints AJ-3 AJ-15 AJ-15K AJ-5K AJ-15 AJ-25 9

BRUSHLESS DRIVERS WITH INTERNAL COUNTERS The Kilews SKD-BE Series tools integrate the performance of a DC Shut-Off Clutch Brushless Screwdriver with a programmable, handle-mounted Batch Counter.

10 BRUSHLESS DRIVERS WITH INTERNAL COUNTERS The Kilews SKD-BE Series tools integrate the performance of a DC Shut-Off Clutch Brushless Screwdriver with a programmable, handle-mounted Batch Counter. Each tool includes driver bits (PH), a torque fixing ring, and a 2m cable to connect to a 32V or 4VDC Power Supply (sold separately). Features: Batch count value can be set from 99 screws/batch. Screwdriver will count down by one each time a good fastener rundown is completed. LED display shows the current screw count value Programming mode may be used to set up parameters for assembly or locked to prevent tampering User-configurable time window for fastener installation: Only fastener rundowns which occur within the specified window will be accepted as good (OK) and cause the count to increment. Rundowns completed outside the time window will be considered no good (NG), as might occur if the screw was cross-threaded (time too short) or stripped (time too long). Visual and audible indicators are available to let the operator know if the rundown was OK or NG, and when the batch has been completed Can be hard-wired with additional output signal cable (included) to output rundown status to a PLC (consult Kilews West or a distributor for further details on connecting output signals) SKD-BE85-ESD Bits Included SKD-BE5 PH#1, #2 SKD-BE8 PH#2 (x2) Specifications Torque Range Speed Start Power Use with Power Weight (w/esd Housing) Nm in-lbs (rpm) Type Consum. Supply COMING SOON SKD-BE23LS5-ESD SKD-BE27L-ESD g 25W SKP-32BC-6W SKD-BE21L-ESD lbs SKD-BE21P-ESD Push SKD-BE512L-ESD SKD-BE512LF-ESD SKD-BE517LF-ESD SKP-32BC-6W SKD-BE519L-ESD or 58 g 55W SKP-BE32HL SKD-BE512P-ESD lbs SKD-BE512PF-ESD ( F fast tools) Push SKD-BE517PF-ESD SKD-BE519P-ESD SKD-BE83L-ESD W SKD-BE83LF-ESD SKD-BE85L-ESD W 82 g SKP-4BHL SKD-BE83P-ESD lbs 9W SKD-BE83PF-ESD Push SKD-BE85P-ESD W 1

N.m 2. 1.5 1..5 Torque Range Chart SKD-BE519L/P SKD-BE512P/PF SKD-BE517LF/PF SKD-BE512L/LF 1.

11 N.m Torque Range Chart SKD-BE519L/P SKD-BE512P/PF SKD-BE517LF/PF SKD-BE512L/LF Dimensions (mm) for SKD-BE5 Series N.m Torque Range Chart SKD-BE857/P SKD-BE83LF/PF Dimensions (mm) for SKD-BE8 Series Accessories Torque Fixing Ring Torque Adjust Tool Suspension Rack Spring Balancer SKD-BE5 KC-6S KW-3 KH-4 SKD-BE8 KC-7S KW-1 KH-2 KL-12 11

SK-B5 SERIES AUTO SHUT-OFF 115VAC SCREWDRIVERS Torque Range:.15 2.16 Nm (1.33 19.

12 SK-B5 SERIES AUTO SHUT-OFF 115VAC SCREWDRIVERS Torque Range: Nm ( in-lbs) Features: Consistent Torque Output Torque Accuracy ±3%* Clean, Brushless Motor Technology Dependable, Long Lifespan Outperforms Brush-type Drivers Plugs Directly into 115VAC Receptacle Input 11 12VAC, 5/6Hz, 48W Integral 3m Power Cord w/ US Plug Approval ETL Listed (cetlus) or Push Start s Right Angle Version Available AUTO-SHUT OFF DIRECT PLUG-IN SCREWDRIVER STABLE TORQUE OUTPUT *Factory test values actual torque results may vary depending on the specific application, operator input, and test equipment used. Each Screwdriver Includes: 2x Driver Bits (PH #2) Torque Fixing Ring Suspension Bail 1/4 HEX BIT HOLDER Torque Range Speed Start Screw Diameter (mm) Nm kgf-cm in-lbs (rpm) Type Machine Tapping SK-B5112L SK-B5112LF 2 SK-B5112P SK-B5112PF 2 Push SK-B5117LF SK-B5117PF Push SK-B5122L SK-B5122P Push Length (mm) 245 Weight 47 g 1. lbs 12

Torque (N m) 2. 1.5 1..5 Inline Drivers SK-B5122L/P SK-B5117LF/PF SK-B5112L/LF/P/PF 2.16 1.67 1.18 Torque (N m) 2. 1.5 1..5 Right Angle Drivers SK-B5122L-RA SK-B5117LF-RA SK-B5112L/LF-RA 1.73 1.34.

13 Torque (N m) Inline Drivers SK-B5122L/P SK-B5117LF/PF SK-B5112L/LF/P/PF Torque (N m) Right Angle Drivers SK-B5122L-RA SK-B5117LF-RA SK-B5112L/LF-RA RA RIGHT ANGLE LEVER START DRIVERS Torque Range Speed Screw Diameter (mm) Nm kgf-cm in-lbs (rpm) Machine Tapping SK-B5112L-RA SK-B5112LF-RA SK-B5117LF-RA SK-B5122L-RA No-Load Current Angle Head Part.4A KL-2 Weight 72 g 1.6 lbs Torque Fixing Ring Accessories Suspension Rack Spring Balancer Angle Head Dimensions (mm) KC-6C KH-4 (For Inline Tools Only) KL-12 13

SK-B6 SERIES AUTO SHUT-OFF 115VAC SCREWDRIVERS Torque Range:.49 4.9 Nm (4.34 43.

14 SK-B6 SERIES AUTO SHUT-OFF 115VAC SCREWDRIVERS Torque Range: Nm ( in-lbs) Features: Consistent Torque Output Torque Accuracy ±3%* Clean, Brushless Motor Technology Dependable, Long Lifespan Outperforms Brush-type Drivers Plugs Directly into 115VAC Receptacle Input 11 12VAC, 5/6Hz, 48W Integral 3m Power Cord w/ US Plug Approval ETL Listed (cetlus) or Push Start s Right Angle Version Available AUTO-SHUT OFF DIRECT PLUG-IN SCREWDRIVER STABLE TORQUE OUTPUT *Factory test values actual torque results may vary depending on the specific application, operator input, and test equipment used. Each Screwdriver Includes: 2x Driver Bits (PH #2) Torque Fixing Ring Suspension Bail 1/4 HEX BIT HOLDER SK-B6125L Torque Range Speed Start Screw Diameter (mm) Nm kgf-cm in-lbs (rpm) Type Machine Tapping 1 SK-B6125LF SK-B6125P 1 SK-B6125PF 2 SK-B615L SK-B615P Push Push Length (mm) 28 Weight 74 g 1.6 lbs 14

6. Torque (N m) 4.5 3. 1.5 SK-B6125L/LF/P/PF SK-B6125L/LF-RA SK-B615L/P SK-B615L-RA 4.9 3.

71 Tool Dimensions (mm) -RA RIGHT ANGLE LEVER START DRIVERS Torque Range Speed Screw

2 SK-B6125LF-RA 2 No-Load Current 2.6 4. 2.6 3.5 9W SK-B615L-RA 1.37 3.43 14 35 12.2 3.4 1 4.

15 6. Torque (N m) SK-B6125L/LF/P/PF SK-B6125L/LF-RA SK-B615L/P SK-B615L-RA Tool Dimensions (mm) -RA RIGHT ANGLE LEVER START DRIVERS Torque Range Speed Screw Diameter (mm) Nm kgf-cm in-lbs (rpm) Machine Tapping SK-B6125L-RA SK-B6125LF-RA 2 No-Load Current W SK-B615L-RA W Angle Head Part KL-1 Weight 99 g 2.2 lbs Torque Fixing Ring Accessories Suspension Rack Spring Balancer KC-7C KH-2L (For Inline Tools Only) KL-12 Angle Head Dimensions (mm) 15

SCREW FEEDERS FOR MANUAL PICKUP Features: Improve productivity screw dispensed for easy pick-up Magnetic pick-up of ferrous screws Precise vibration control allows feeding of many

very cost effective way to increase productivity Small size does not clutter work space Includes AC adapter, set-up tools and shims KFR-15 KFA-82H Specifications KFR-15 KFA-85H KFA-82H

3lbs COMING Power Source 1 24VAC 1 24VAC 1 24VAC AC Adapter 15VDC 12VDC 12VDC Applicable Screw M1.2 SOON / M1.4 / M1.7 / M2. / M.8 / M1. / M1.2 / M1.4 / M1. M5. M2.3 / M2.6 / M3. / M3.5 M1.

16 SCREW FEEDERS FOR MANUAL PICKUP Features: Improve productivity screw dispensed for easy pick-up Magnetic pick-up of ferrous screws Precise vibration control allows feeding of many different screw types and sizes Individual driver motors for vibration and feeding Auto shut-off of vibration/feed when not in use Quiet operation simple service and set-up Great value very cost effective way to increase productivity Small size does not clutter work space Includes AC adapter, set-up tools and shims KFR-15 KFA-82H Specifications KFR-15 KFA-85H KFA-82H Dimensions (L x W x H) 182 x 126 x 147 mm 182 x 124 x 15 mm 16 x 82 x 112 mm Weight (w/o adapter) 2.49kg / 5.5lbs 3.1kg / 6.8lbs 1.53kg / 3.3lbs COMING Power Source 1 24VAC 1 24VAC 1 24VAC AC Adapter 15VDC 12VDC 12VDC Applicable Screw M1.2 SOON / M1.4 / M1.7 / M2. / M.8 / M1. / M1.2 / M1.4 / M1. M5. M2.3 / M2.6 / M3. / M3.5 M1.7 / M2. (Adjustable) (Specify size when ordering) (Specify size when ordering) Applicable Screw Thread Length 19 mm 12 mm 5 mm To order KFA-82H, add screw size to model number as a suffix (eg.- for M1.4 screws specify KFA-82H-1.4 ) 16

SCREW FEEDERS FOR VACUUM PICKUP & AUTOMATION Features: Ideal for robotic applications magnetic or vacuum pick-up Signal output when screw

with LED displays for assembly process feedback Small size does not clutter work space Includes AC adapter, set-up tools and shims KFA-83

adapter) 3.1kg / 6.8lbs 3.kg / 6.6lbs 1.46kg / 3.2lbs COMING Power Source 1 24VAC 1 24VAC AC Adapter 12VDC 12VDC Applicable Screw M1.

17 SCREW FEEDERS FOR VACUUM PICKUP & AUTOMATION Features: Ideal for robotic applications magnetic or vacuum pick-up Signal output when screw is ready for pick-up Brushless driver motors for vibration and feeding Quiet operation simple service and set-up Integrated screw counter with LED displays for assembly process feedback Small size does not clutter work space Includes AC adapter, set-up tools and shims KFA-83 KFA-82A Specifications KFA-85A KFA-83 KFA-82A Dimensions (L x W x H) 182 x 124 x 15 mm 182 x 124 x 146 mm 16 x 82 x 112 mm Weight (w/o adapter) 3.1kg / 6.8lbs 3.kg / 6.6lbs 1.46kg / 3.2lbs COMING Power Source 1 24VAC 1 24VAC AC Adapter 12VDC 12VDC Applicable Screw M1.2 SOON M.8 / M1. / M1.2 / M1.4 / / M1.4 / M1.7 / M2. / M.8 / M1. / M1.2 / M1.4 / M1.7 / M2. / M2.3 / M2.6 / M2.3 / M2.6 / M3. / M3.5 M1.7 / M2. M3. (Specify size when ordering) (Specify size when ordering) (Specify size when ordering) Applicable Screw Thread Length 12 mm 15 mm 5 mm To order the above models, add screw size to the model number as a suffix (eg.- for a KFA-82A with M1.4 screws specify KFA-82A-1.4 ) 17

TORQUE ARMS KP-AUX5 Torque reaction arm complete with work platform Painted steel work platform is 45 x 32 mm Ball bushing provides smooth vertical travel Includes

designed to hold SKD-BN5 series screwdrivers KP-AUX-1T KP-AUX5 Parallel arm design, keeps screwdriver perpendicular to work surface Nitrogen gas shock supports the

Arm Suspension Station Working Range (mm) 5-83 5-34 Compatible with SKD-BE8 Series (Consult factory for adapters for use with other models) SKD-BN5 Series SKD-BE5

wall mount bracket Smooth linear motion and wide range of travel Constructed from light weight aluminum alloy Tool holder accommodates a range of tool diameters

18 TORQUE ARMS KP-AUX5 Torque reaction arm complete with work platform Painted steel work platform is 45 x 32 mm Ball bushing provides smooth vertical travel Includes tool balancer to support weight of the screwdriver Smooth, fluid motion of arm is ideal for precise positioning of lower torque tools Special tool holder is designed to hold SKD-BN5 series screwdrivers KP-AUX-1T KP-AUX5 Parallel arm design, keeps screwdriver perpendicular to work surface Nitrogen gas shock supports the weight of the tool Optional KP-VA1 adapter is available to allow tool to be positioned at different angles Specifications KP-AUX-1T KP-AUX5 Description Suspension Arm Suspension Station Working Range (mm) Compatible with SKD-BE8 Series (Consult factory for adapters for use with other models) SKD-BN5 Series SKD-BE5 Series SKD-5 Series Optional Accessory KP-VA1 Adjustable Tool Holder KL-12 Spring Balancer KP-AUX-1T TELESCOPIC TORQUE ARMS Telescoping torque reaction arm with a wall mount bracket Smooth linear motion and wide range of travel Constructed from light weight aluminum alloy Tool holder accommodates a range of tool diameters Specifications KP-AUX-B5-1 KP-AUX-B5-12 Max Torque (Nm) 5 Working Range (mm) Tool Diameter (mm) Type Wall-Mounted Compatible with All Kilews West Drivers 18

OTHER TOOL SUPPORT KW-TOOL STAND Supports up to 2.

reach with slide hanger for horizontal motion Arm pivots 18 degrees KW-TOOL STAND

3kg max load Extra Arm Kit Add another arm to the tool stand, 6cm reach, includes

drilling SPRING BALANCERS Suspends driver over work area for easy access

19 OTHER TOOL SUPPORT KW-TOOL STAND Supports up to 2.3kg (5lbs) Aluminum construction Adjustable height up to 11cm (44 in) 6cm (24 in) reach with slide hanger for horizontal motion Arm pivots 18 degrees KW-TOOL STAND KW-ARMKIT KW-CLAMP Tool Stand 11cm height, 6cm reach, 2.3kg max load Extra Arm Kit Add another arm to the tool stand, 6cm reach, includes slider and hanging clip Bench Clamp Fastens stand to edge of workbench without drilling SPRING BALANCERS Suspends driver over work area for easy access Adjustable spring tension Travel distance of up to 1.8m Specifications KL-6 KL-12 Weight Range.3.6kg /.7 1.3lbs.6 1.5kg / lbs Travel Distance 1.8m 19

20 Cat#KWUS216

TABLE OF CONTENTS. Right Angle - 32V Lever Start Drivers NM IN.LBS. Slow Start Control Module: KL-SSBN

TABLE OF CONTENTS. Right Angle - 32V Lever Start Drivers NM IN.LBS. Slow Start Control Module: KL-SSBN TABLE OF CONTENTS 3-4 Auto Shut-off 32V Electric Screwdrivers & Accessories 0.02-2.94 NM --- 0.2-26 IN.LBS 5 Right Angle - 32V Lever Start Drivers 0.11-2.06 NM --- 0.9-18.2 IN.LBS 6 Slow Start Control