BRASS PIPE FITTINGS 100A-BA. CONSTRUCTION CA360, CA345, CA3604, CA377 Brass. Use with brass, copper or iron pipe. Temperature Range: 65 to +250 F.
|
|
|
- Stuart Hawkins
- 5 years ago
- Views:
Transcription
1 RSS FITTINGS RSS FITTINGS CONSTRUCTION C360, C345, C3604, C377 rass PPLICTIONS RNGES Use with brass, copper or iron pipe Temperature Range: 65 to +250 F. Pressure Range: Up to 1000 PSI Pipe Thread ssembly: Straight Fittings: 1. Hand Tighten 2. 1/8 to 1/2 : Wrench Tight 2 Full 360 Turns 1/2 & bove: 1 1/2 Full Turns Shaped Fittings: 1. Hand Tighten 2. Wrench Tight 1 to Full 360 Turns *For NPTF Pipe Threads with Pre-pplied Sealant ORDERING INFORMTION Parts that include F in the part number, for example, 101F-, are supplied forgings. Parts that include PF are supplied as low lead compliant fittings. Part number without the PF distinction are NOT lead free compliant Type of Fitting: 90 Female Pipe Elbow Pipe Thread: 1/4 Pipe Thread: 1/8 NOTES Non-stock items and special parts are available on a quotation basis. Configurations and dimensions are subject to change without notice. UY FROM... THE ROO MN 6
2 RSS FITTINGS Female Pipe Elbow 45 Female Elbow Female Pipe Tee Female Cross Tee Female Coupling Ground Joint (Cored) 109S (Solid) 109CS 110F 110 Pipe Cap Square Head Plug Square Head Plug Counter Sunk Plug Face ushing ushing R L Lock Nut Close Nipple Yellow rass Nipple Red rass Nipple 90 Street Elbow 90 Long Street Elbow 116M (Cored) 121S (Solid) 90 Male Street Elbow Slotted Plug Reducer dapter Head Plug Head Plug S T9 Nipple Reducing Nipple 45 Street Elbow Street Tee Street Tee (FXMXM) ranch Tee 129 ulkhead UY FROM THE ROO MN 7
3 RSS FITTINGS ELOW FPT TO FPT 101 TEE FPT LL ENDS THRED THRED 100-1/ / F- 1/ F- 1/ / / F- 1/ F- 1/ /4 x 1/ /4 x 1/4 x 1/ C 3/ C 3/ C 3/8 x 1/ F-C 3/ F-C 3/8 x 1/ D 1/ F-D 1/ CC 3/8 x 3/8 x 1/ D 1/ F-D 1/ DC 1/2 x 3/ DDC 1/2 x 1/2 x 3/ F-DC 1/2 x 3/ E 3/ E 3/ F-E 3/ F-E 3/ REF SE arstock Style REF SE arstock Style ELOW 45 FPT TO FPT 102 CROSS FPT LL ENDS THRED THRED / / / F- 1/ C 3/ / D 1/ F- 1/ E 3/ C 3/ F-C 3/ F-D 1/ F-E 3/ arstock Style arstock Style 8
4 RSS FITTINGS 103 COUPLING FPT TO FPT 109 SQURE HED PLUG CORED THRED 103-1/8.75 1/2 103H- 1/8.75 9/ /4.88 5/8 103H- 1/ /4 103-C /16 103H-C 3/ /8 103-D 1/ /16 103H-D 1/ / E 3/ /4 103H-E 3/ /8 REF SE GROUND JOINT UNION FPT TO FPT THRED 104-1/ / / / C 3/ / D 1/ / E 3/ /4 108 CP THRED 109-1/ / C 3/ D 1/ E 3/ F S SQURE HED PLUG SOLID THRED 109S-D 1/ S-E 3/ S-F CS COUNTER-SUNK PLUG THRED 109CS- 1/ CS- 1/ CS-C 3/ CS-D 1/ CS-E 3/4.55 THRED 108-1/8.47 9/ / / C 3/ / D 1/ / E 3/ /4 110F FCE USHING THRED 110F-C 3/8 x 1/ F-D 1/2 x 1/ F-DC 1/2 x 3/ F-ED 3/4 x 1/
5 RSS FITTINGS 110 USHING 112 CLOSE NIPPLE THRED 110-1/4 x 1/8.62 9/16 110H- 1/4 x 1/8.75 9/ C 3/8 x 1/ /16 110H-C 3/8 x 1/ / C 3/8 x 1/ /16 110H-C 3/8 x 1/4.75 3/4 110-D 1/2 x 1/ /16 110H-D 1/2 x 1/ /8 110-D 1/2 x 1/ /16 110H-D 1/2 x 1/ /8 110-DC 1/2 x 3/ /16 110H-DC 1/2 x 3/ /8 110-E 3/4 x 1/ /16 110H-E 3/4 x 1/ /8 110-E 3/4 x 1/ /16 110H-E 3/4 x 1/ /8 110-EC 3/4 x 3/ /16 110H-EC 3/4 x 3/ /8 110-ED 3/4 x 1/ /16 110H-ED 3/4 x 1/ /8 110-F 1 x 1/ /8 110-FC 1 x 3/ /8 110-FD 1 x 1/ /8 110-FE 1 x 3/ /8 THRED 112-1/ / C 3/ D 1/ E 3/ F LONG NIPPLE (YELLOW RSS) THRED /8 1-1/ /4 1-1/2 113-C15 3/8 1-1/2 113-D15 1/2 1-1/2 113-E15 3/4 1-1/ / / C2 3/ D2 1/ E3 3/4 2 REF SE (H Style) 111 LOCK NUT THRED 111-1/ / /4.25 7/8 111-C 3/ D 1/ /8 111-E 3/ /2 10
6 RSS FITTINGS 113R LONG NIPPLE (RED RSS) 113R LONG NIPPLE (RED RSS) CONT. THRED 113R-25 1/8 2-1/2 113R-25 1/4 2-1/2 113R-C25 3/8 2-1/2 113R-D25 1/2 2-1/2 113R-E25 3/4 2-1/2 113R-3 1/ R-3 1/ R-C3 3/ R-D3 1/ R-E3 3/ R-35 1/8 3-1/2 113R-35 1/4 3-1/2 113R-C35 3/8 3-1/2 113R-D35 1/2 3-1/2 113R-E35 3/4 3-1/2 113R-4 1/ R-4 1/ R-C4 3/ R-D4 1/ R-E4 3/ R-45 1/8 4-1/2 113R-45 1/4 4-1/2 113R-C45 3/8 4-1/2 113R-D45 1/2 4-1/2 113R-E45 3/4 4-1/2 113R-5 1/ R-5 1/ R-C5 3/ R-D5 1/ R-E5 3/ R-55 1/8 5-1/2 113R-55 1/4 5-1/2 113R-C55 3/8 5-1/2 113R-D55 1/2 5-1/2 113R-E55 3/4 5-1/2 THRED 113R-6 1/ R-6 1/ R-C6 3/ R-D6 1/ R-E6 3/ R-7 1/ R-7 1/ R-C7 3/ R-D7 1/ R-E7 3/ STREET ELOW THRED 116-1/ F- 1/ K 1/ / F- 1/ K 1/ C 3/ F-C 3/ C-K 3/ D 1/ F-D 1/ D-K 1/ E 3/ F-E 3/ E-K 3/ Mailbox Style lock Style 11
7 RSS FITTINGS 116L STREET ELOW LONG PTTERN 119 REDUCER FPT TO FPT THRED 116L- 1/ L- 1/ L-C 3/ M MLE ELOW NUM- ER THRED 116M- 1/ MF- 1/ M- 1/ MF- 1/ MF- 1/4 x 1/ M-C 3/ M-C 3/8 x 1/ M-D 1/ MF-D 1/ M-DC 1/2 x 3/ SLOTTED PLUG THRED 117-1/ / C 3/8.45 THRED 119-1/4 x 1/8.94 5/8 119H- 1/4 x 1/8.96 3/4 119-C 3/8 x 1/ /4 119-C 3/8 x 1/ /16 119H-C 3/8 x 1/ /8 119-D 1/2 x 1/ / D 1/2 x 1/ /16 119H-D 1/2 x 1/ / DC 1/2 x 3/ /16 119H-DC 1/2 x 3/ / ED 3/4 x 1/ /4 REF SE (H Style) 120 DPTER FPT TO MPT THRED 120-1/8 x 1/8.88 1/2 120H- 1/8 x 1/8.87 9/ /4 x 1/8.94 5/8 120H- 1/4 x 1/ / /4 x 1/ /8 120H- 1/4 x 1/ /4 120-C 3/8 x 1/ /4 120-C 3/8 x 1/ /16 120H-C 3/8 x 1/ /8 120-CC 3/8 x 3/ /16 120H-CC 3/8 x 3/ D 1/2 x 1/ /16 120H-D 1/2 x 1/ / DC 1/2 x 3/ /16 120H-DC 1/2 x 3/ / DD 1/2 x 1/ /16 120H-DD 1/2 x 1/ / ED 3/4 x 1/ /4 REF SE (H Style) 12
8 RSS FITTINGS 121 HED PLUG CORED 123 REDUCING NIPPLE THRED 121-1/8.56 7/ /4.62 9/ C 3/ / D 1/2.81 7/8 121-E 3/ / F /16 121S HED PLUG SOLID THRED 122 NIPPLE 121S- 1/8.56 7/16 121S- 1/4.62 9/16 121S-C 3/ /16 121S-D 1/2.81 7/8 121S-E 3/ /16 THRED 122-1/8.91 7/16 122H- 1/8.97 7/ / /16 122H- 1/ / C 3/ /16 122H-C 3/ / D 1/ /8 122H-D 1/ /8 122-E 3/ /16 122H-E 3/ /8 REF SE (H Style) THRED 123-1/4 x 1/ /16 123H- 1/4 x 1/ / C 3/8 x 1/ /16 123H-C 3/8 x 1/ / C 3/8 x 1/ /16 123H-C 3/8 x 1/ / D 1/2 x 1/ /8 123H-D 1/2 x 1/ /8 123-DC 1/2 x 3/ /8 123H-DC 1/2 x 3/ /8 123-ED 3/4 x 1/ /16 REF SE (H Style) 124 STREET ELOW 45 THRED 124-1/ / C 3/ D 1/ REF SE STREET TEE FPT TO MPT TO FPT THRED 127-1/ / C 3/ D 1/ REF SE
9 RSS FITTINGS 127S STREET TEE FPT TO MPT TO MPT 128 REDUCING ELOW THRED 127S- 1/ S- 1/ THRED 128-1/4 x 1/ C 3/8 x 1/ T9 RNCH TEE FPT TO FPT TO MPT 129 ULKHED DPTER FPT TO FPT THRED T / T / T / T / REF SE C /8 FPT 5/ S-.92 1/4 FPT 3/ /4 FPT 3/ C /8 FPT D /2 FPT 1 1/ E /4 FPT 1-5/16-12 arstock Style 14
Hi-Duty Flareless Tube Fittings
Hi-uty Flareless Tube Fittings dvantages zfc10 No flaring, soldering or other preparation of tubing is necessary. Pre-assembled brass fitting, with sleeve machined onto nut. This two piece flareless compression
Pipe Fittings 1/16 to 1 in. sizes 316 stainless steel, brass, and carbon steel NPT, ISO/BSP, and SAE threads
www.swagelok.com Pipe Fittings 1/16 to 1 sizes 316 stainless steel, brass, and carbon steel, /SP, and S threads 2 Pipe Fittings Contents Nipples Page 4 dapters, Gaskets Page 6 Reducing ushings, Reducers
Dixon Brass. Service Solutions Selection. dixonvalve.com
2014 ixon rass Service Solutions Selection dixonvalve.com 877.963.4966 SERIES NUMER STNR HOSE FITTINGS WELING ONNETORS PGE 102 Male Pipe... 2 102-SS Male Pipe-Stainless... 2 102-SPT Male Pipe-ritish...
Pneumatic Fittings & Tubing
Pneumatic Fittings & Tubing General Information Fitting escriptions Working Pressure Style Maximum Nominal onstruction pplication ompatible Tubing Poly-Flo 500 PSI 125 PSI Three-piece: body, nut Pneumatic
High-Flow Stainless Tubes. Standard Tubes BRASS 18 LONG STAINLESS STEEL 18 LONG H11. All stainless construction for high strength and durability
High-Flow Stainless Tubes H11 ll stainless construction for high strength and durability Use with all PCS cascades J in part number indicates next largest thread TUE TUE L = 12 18 24 36 HF093T-.090.076
DYNA-POWER LUBRICATION
DYN-POWER LURICTION D-0-09- Lubrication ccessories July 2007 division of Dyna-Power Engineers,Inc. 5330 Greenwood ve South olland, IL 60473 LURICTION CCESSORIES Table of Contents Grease / Oil Guns 2 Grease
Pipe Fittings & Steel Nipples
November 200 For the most current product/pricing information on nvil products, please visit our website at www.anvilintl.com. Pipe Fittings & Steel Nipples U I L D I N G C O N N E C T I O N S T H T L
HVAC Products 2016 EDITION NCI CANADA INC.
HVAC Products 2016 EDITION NCI CANADA INC. YOUR SINGLE SOURCE SOLUTION NCI Canada Inc. is a Canadian National master distributor of high quality valves, fittings, pipes and related products serving residential,
BRONZE FITTINGS. Class 125 (150) For steam, water, gas, oil and air service Standard specifications PRICING FILE AVAILABLE ONLINE
NIPPLES & FITTINGS RONZE FITTINGS U L UL842, UL258, UL125, Class 125 (150) For steam, water, gas, oil and air service Standard specifications Materials - STM 62-93 (85,5,5,5) C83600 PRICING FILE VILLE
Pipe Fittings & Steel Nipples
Pipe Fittings & Steel Nipples www.anvilintl.com NOVEMER 20 For the most current product/pricing information on nvil products, please visit our website at www.anvilintl.com UILDING CONNECTIONS THT LST For
Pipe Fittings. 1/16 to 1 in. sizes. 316 stainless steel, brass, and carbon steel. NPT, ISO/BSP, and SAE threads.
Pipe Fittings 1 www.swagelok.com Pipe Fittings PIP 1/16 to 1 sizes 316 stainless steel, brass, and carbon steel, /SP, and S threads 2 Weld, VCR, VCO, Pipe, and Vacuum Fittings Contents Nipples Page 4 Crosses
USA, INC. At the date of 30/04/2009: Lead free law passed. Law suggested
US, IC. US, IC. t the date of 30/04/2009: ead free law passed aw suggested CCORDIG CIFORI HET SFETY CODE 116875 VIE FROM SEPTEMER 2009 SERIES 171 F COMMERCI STYE rass ball valve, female/female, full port
SPEAKMAN. SE-675 Installation, Operation, and Maintenance Instructions SAFE-T-ZONE EMERGENCY SHOWER AND EYE/FACE WASH
SE-675 Installation, Operation, and Maintenance Instructions SAFE-T-ZONE EMERGENCY SHOWER AND EYE/FACE WASH DESCRIPTION Floor mounted emergency deluge shower and non-aerated eye/face wash combination unit.
Pneufit Inch Series Push-In Tube Fittings 1/8" to 1/2" Tube Sizes UNF to 1/2" NPT Thread Options
Section 1 Pneufit Inch Series Push-In Tube Fittings to 1/2" Tube Sizes 10-32 UNF to 1/2" NPT Thread Options Inch Series Product Numbering System..................FIT-1-2 Inch Series Shapes and odes.........................fit-1-3
Tubing Cutter for 1/16" Stainless Steel Tubing
Delivery Tubing and ccessories 311 P000257 Tubing Cutter for 1/16" Stainless Steel Tubing 58692-U Low-cost tool cuts 1/16" stainless steel tubing without obstructing the bore. Easily cut 1/16" OD stainless
Jones Stephens Corp. PlumBest LTConnections SECTION D - FITTINGS & VALVES. Brass Compression Fittings
SECTION - FITTINGS & VALVES Brass Compression Fittings... 131-132 Chrome Plated Compression Fittings... 133 45 Flare Tube Fittings... 134-135 Space Heater & Gas Range Fittings... 136 Yellow Brass Pipe
Lincoln installation components, accessories and lubrication fittings
Lincoln installation components, accessories and lubrication fittings People, capabilities and systems to save money and increase productivity Industry leader Continually satisfying our customers with
Lab Specialty Products Technical Information TECHNICAL INFORMATION WEIGHTS & DIMENSIONS
Lab Specialty Products Technical Information TECHNICL INFORMTION WEIGHTS & DIMENSIONS Contact Spears for any Information not found. Page 569 Lab Ball s Sample Engineering Specification ll thermoplastic
Pressure Gauge Kit and Test Couplings
Pressure Gauge Kit and Test Couplings Overview The Eaton pressure gauge kit and screw together test couplings provide accurate and efficient pressure control and monitoring of your hydraulic system, while
Pipe Fittings. HP Series
Pipe Fittings HP Series Contents Pipe Plug Hollow Hex Plug Close Nipple Special Pipe Nipple Hex Nipple Hex Long Nipple Reducing ushing Pipe Cap Hex Coupling Union all Joints Adaper Male lbow Street lbow
Performance Products
Performance Products INTRODUCTION INTRODUCTION Eaton s eroquip Performance Product brand of hose and fittings continues to prove there is a difference in performance plumbing products. Our long tradition
Parts List Recessed Laboratory Units
Recessed Laboratory Units Item Part Number Description C P470-021LDC FS-Plus Spray Head P450-048 10 Dia. Stainless Steel Shower Head P450-062 P450-016 10 Dia. Recessed Flanged Stainless Steel Shower Head
Bronze Fittings 125# and Flanges 150#
ronze Fittings Specifications branded bronze fittings are UL Listed Canadian egistration umbers available at www.smithcooper.com ronze fittings conform to WW C800 ronze castings conform to STM 62, US lloy
Miniature Fittings Series M
Miniature Fittings Series M pplicable Tubing: Ø 3.2, Ø 4, Ø 6 onnection Thread:, M, arb onfiguration for easy insertion into the tube Holds the tube tightly ody With electroless nickel plated Low tightening
DM Valve LINE 1 LINE 1 LINE 2. Positive indication at every bearing. No small ports No system redesign when
DD & DM Valves dualine, Grease & Oil General dd and dm Valves are completely hydraulic in operation and will deliver either oil or grease. These dualine valves are also fully and individually adjustable
High-Pressure Fluid Swivel Connectors. Description. Select the Proper Swivel Combination. Specifications. Tube OD (in.) Dash Numbers (JIC-)
High-Pressure Fluid Swivel onnectors escription The figures in this document are for general reference only. High-pressure fluid swivel connectors can be used in a variety of different combinations, and
SECTIO N 15 Phone: (866) Fax: (888)
PVC FITTINGS SCHEDULE 40, 80, INSERT NYLON FITTINGS PVC & CPVC NIPPLES SECTIO N 15 www.cbsupplies.ca Phone: (866) 503-5523 Fax: (888) 562-2095 AGI@cbsupplies.ca PRODUCTS LIST SCHEDULE 40 PVC PRESSURE FITTINGS
Ultra High Pressure Valves, Fittings and Tubing Pressures to 152,000 psi
Ultra High Valves, Fittings and Tubing s to 152,000 psi MXIMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability,
GRUVLOK FITTINGS FOR GROOVED-END PIPE
GRUVLOK FITTINGS FOR GROOVED-END PIPE Gruvlok fittings are available through 24" nominal pipe size in a variety of styles. Use the Fitting Table to convert nominal pipe size to corresponding pipe These
BRASS OVERVIEW REUSABLE HOSE FITTINGS FRAME FITTINGS - STEEL TERMINAL BOLTS DOT AIR BRAKE FITTINGS - NYLON TUBING
BRASS OVERVIEW REUSABLE HOSE FITTINGS FRAME FITTINGS - STEEL TERMINAL BOLTS DOT AIR BRAKE FITTINGS - NYLON TUBING DOT AIR BRAKE FITTINGS - COPPER TUBING DOT PUSH LOCK FITTINGS - NYLON TUBING DOT COMPOSITE
O-RING SEAL TUBE FITTINGS
Hose Fittings O-RING SEL TUBE FITTINGS TLOG NO. LORS-16 i Phone: 937/277-9364 FX: 937/277-6516 www.lenzinc.com Hose O-RING Fittings SEL The goal of Lenz is to help our Distributors, OEM s and customers
DM Valve LINE 1 LINE 1 LINE 2. Positive indication at every bearing. adding or subtracting points at every bearing. Has only two moving parts.
DD & DM Valves Dualine, Grease & Oil General DD and DM Valves are completely hydraulic in operation and will deliver either oil or grease. These Dualine valves are also fully and individually adjustable
Emergency Shear Valves
Emergency Shear Valves 0060 Underpump Emergency Valve The Emco Wheaton 0060 Emergency Shear Valve incorporates a replaceable shear section and a heat sensitive fusible link assembly. The valve can be manually
Set-Up Instructions. for EC-VM400. Motorized Valves
Set-Up Instructions for EC-VM400 Motorized Valves Published by: Spraying Devices, Inc. P. O. Box 3107 Visalia, CA. 93278-3197 USA Tel: (559)SDI-5555 Fax: (559)SDI-5591 email: sales@sprayingdevices.com
TL960 PARTS MANUAL. Fuel Section. Page 9-1. Fuel 09/97
Fuel Section Fuel Page 9-1 Fuel Tank Between The Rails Page 9-2 Fuel Fuel Tank Between The Rail Item Part Num. Number Qty. Description Notes 1 61360662 1 Elbow, 90 o, 1/2" NPT x 5/8" T 2 61270100 1 Sender
CAST IRON THREADED FITTINGS
q IGUR 59 Size lack NPS N NPS N NPS N in mm in mm in mm in mm in mm in mm lbs kg /4 8 /6 7 /6 7 /6 22 /8 29 /8 29 /8 29 0.57 0.26 /2 5 /2 5 /8 0 /6 7 /6 7 /4 9 /8 29 /8 29 /8 29 0.57 0.26 /4 20 /6 22 /6
Safety Stations with Eye/Face Wash
Safety Stations with ye/face Wash F G1950 Safety Station with ye/face Wash, Stainless Steel owl pplication: ombination eye/face wash and shower safety station. Two large FS-Plus spray-type outlet heads
Rigid/Swivel Optional Spouts
Rigid/Swivel Optional Spouts SPECIFYING PROCEDURE FOR OPTION RIGID/SWIVE SPOUTS: 1. Select BSE PRODUCT with Standard Gooseneck Spout, and with spout outlet and handles required. 2. Select Optional Rigid/Swivel
INSTALLATION INSTRUCTIONS FOR BATTERY POWERED SENSOR ACTIVATED LAVATORY FAUCETS
Code No. 081631 Rev. 3 (08/10) INSTLLTION INSTRUCTIONS FOR TTERY POWERED SENSOR CTIVTED LVTORY FUCETS EF-615 Pedestal, attery Powered, Sensor ctivated Lavatory Faucet EF-650 4 Centerset, attery Powered,
GENE RICH SPECIALTIES
All s Final - No Returns Allowed Attn: Plumbing Specialties Buyers Limited Time for Super Savings on Select Items: Faucets and Supplies Compression Tees and Couplings Dielectric Unions Red, Yellow and
SKY Refrigeration Brass Fittings. Forged Short Barrel Flare Nuts (Co 2. Forged Long Barrel Flare Nuts (Frost Free & Co 2
Forged Short Barrel Flare Nuts (Co 2 ) 13 SKY Item No. Item Description CO2 Pack qty 201-0404 1/4 SAE Yes 10 201-0504 5/16 SAE X 1/4 Tube Yes 10 201-0505 5/16 SAE Yes 10 201-0606 3/8 SAE Yes 10 201-0808
CONN in mm in mm in mm SIZE lbs kg PX " /4"
ccessories 1 PV MNUL IR VENT PRESSURE / TEMPERTURE ombination Manual ir Vent and Pressure/Temperature Test Port with brass body, dual durometer EPDM core, blowout-proof stem, side discharge vent with 1/8
Safety Stations with Eyewash
Safety Stations with yewash F G1942 Safety Station with yewash, Freeze and Scald Protection Valves pplication: ombination eyewash and shower safety station. Unit is furnished with temperature-actuated
Compression Fittings 36 Series Metric
6 Series 4 mm 28 mm O/ l l l l Wide range of types and sizes Rugged and durable Suitable for use under extreme conditions of pressure and temperature Ideal for most general industrial applications Technical
LITTLE SOIL SQUIRT. RF809-4 LITTLE SOIL SQUIRT (Completely assembled unit) $ (Weight 110 Pounds) Effective February 17,
LITTLE SOIL SQUIRT RF809-4 LITTLE SOIL SQUIRT (Completely assembled unit) $1800.00 (Weight 110 Pounds) INCLUDES: 12-volt ½ HP explosion-proof motor #0-4814 $600.00 See page 2 #4001N-A Hypro Pump $253.00
Malleable Iron Pipe Fittings BS EN Patterns Sizes List Prices Prices effective from 1st September 2008 Exclusive of VAT.
Malleable Iron Pipe Fittings BS EN 10242 Patterns Sizes List Prices Prices effective from 1st September 2008 Exclusive of VAT. FM 20478 George Fischer Ltd. Profile of a Company In 1802 Johann Conrad Fischer
BC. Materials. Working temperature (Seals) Sectors: Industrial, Agricultural
1 SERI ISO-A Manufactured according ISO 7241-A norm, size meets also ISO 5675 requirements. Poppet Valve or Ball closing system. BSP, NPTF, SAE/ORB threads. Others available upon request. Materials Body:
Fluid Flow Components Composantes pour un monde fluide
6011 Fluid Flow Components Composantes pour un monde fluide Vancouver Edmonton Winnipeg Toronto Montreal Moncton Product Index BRASS FITTINGS Page Carded...45-46 Closet Bolt...42 Compression...9-12 Compression
Shaft Adapter (5/8 to 3/4 ) NOTE CI = Cast Iron, N = Ni-Resist, SL = Silver Last. Series Series 7560
Your One Stop Shop for Parts Hypro Roller Pumps Ideal for Farm Sprayers, Pest Control and Chemical Application Usage. Housings available in Cast Iron, Ni-Resist or Silver Series Self priming operation;
FIT-2. Inch. Ø Â" to Ë" O/D tube
For simple and quick assembly of pneumatic circuits. Positive tube connection. Wide range of types available. Reliable and corrosion resistant. Specifications Fluid: Compressed air, nitrogen, inert and
PARTS LIST, COUNTER CONVECTION STEAMERS MODELS SN-3E, SN-4E, SN-5E PARTS LIST COUNTER CONVECTION STEAMERS BLODGETT MODELS: SN-3E SN-4E
PARTS LIST COUNTER CONVECTION STEAMERS BLODGETT MODELS: SN-3E SN-4E November 27, 2013 BLODGETT OVEN CO 44 lakeside Ave Burlington, VT 05446 Tel. 802-658-6600 Fax 802-860-3732 www.blodgett.com 1 2013-11-27
VB-7000 Series. Selection Guide. Applications. Applicable Literature. Selection Guide Contents
V-7000 Series Selection Guide T V-7000 Series 1/2 to 2 Globe Vlves with Fort M400, M800, nd M1500 ctutors pplictions T Fort M400, M800, nd M1500 series liner ctutors mount directly 1 onto 1/2 to 2 V-7xxx
GROUP E EXPLODED VIEW: EV FUEL SYSTEM 2.4L G2 DRAWING #: 0G1151 ITEM PART# QTY. DESCRIPTION
EXPLODED VIEW: EV FUEL SYSTEM 2.4L G2 DRAWING #: 0G1151 GROUP E ITEM PART# QTY. DESCRIPTION 1 026915 2 NIPPLE CLOSE 3/4 X 1.375 2 075580 1 FLANGE FUEL INLET 3 0F6390C 1 REGULATOR ASSY 2.4L (25KW) 0F6390B
Applicable Tubing. Tubing material Note1) Tubing O.D. Note 1) ø2 is available in polyurethane only. Specifications
One-touch Mini : Metric Size Connecting : M3, M5, R1/8 Outside diameter reduced y 0% (Compared with series KQ), allowing piping in a narrower space. Thread sealant as standard. For application requiring
INSTALLATION INSTRUCTIONS FOR CONCEALED CLOSET AND URINAL FLUSHOMETERS
Code No. 0816170 Rev. 2 (12/11) INSTLLTION INSTRUCTIONS FOR CONCELED CLOSET ND URINL FLUSHOMETERS Model 140 Model 195 Concealed Closet Flushometer 1-1/2 Exposed ack Spud MODEL 140 MODEL 154 Concealed Closet
SUPPLY JOINTS CONTENTS
ACCESSORIES GENERAL CATALOG AIR TREATMENT, AUXILIARY, VACUUM, AND FLUORORESIN PRODUCTS CONTENTS Specifications, Order Codes, Size Table 371 Dimensions 373 NCU Specification Order Codes, Model Table 379
OUR COMPLETE ACCESSORIES LINE INCLUDES:
is for Accessories When it comes to accessories, no one can match Reinflex s extensive stock of OEM grade adapters, ball valves, fittings, pressure gauges, and quick disconnects. Many of our adapters are
Fittings, Materials and Tubing Guide. Instrumentation Products
Fittings, Materials and Tubing Guide Fittings, Materials and Tubing Guide Instrumentation Products ISO onversion Fittings Visual Index ISO Fitting Nomenclature page 122 Typical Fastening s page 123 Forms
Appendix E Head and Valve Assembly Details All D-Style Models 351
Appendix E Hed nd Vlve Assemly Detils All D-Style Models FD Hed Vlve Holddown Assemlies Suction (spec P) 0 0 Suction (spec P) 0 0 Dischrge (ll specs) 0 WFD Hed Appendix E Hed nd Vlve Assemly Detils All
CC-410 KIT SERIES INSTRUCTION SHEET
(COMPLETE CC-410-W KIT ILLUSTRTED. CUT-OUTS IN TRCK & FSCI TO EXPOSE COMPONENTS) CC-410 KIT SERIES INSTRUCTION SHEET CROWDERTRCK S CTCH N CLOSE TM SYSTEM PREVENTS BOUNCING ND SLMG OF SLIDING DOORS. CN
Section 7 Stainless Steel 316 Threaded Fittings
Section 7 Stainless Steel 316 Threaded Fittings Edition 3 121 [7] STINLESS STEEL 316 THREDED FITTINGS Specifications bout Stainless Steel - Stainless steel can be defined as a steel alloy that has a minimum
MALE X FEMALE LARGE-PORT BALL VALVE T-900 M x F and T-900 M x F-T
MLE X FEMLE LRGE-PORT LL VLVE T-900 M x F and T-900 M x F-T urable forged brass construction Space-saving male-by-female end connections are ideal for confined piping installations T-handle equipped models
Series. 777 Oakmont Lane, Westmont, IL Outside U.S
Oakmont Lane, Westmont, IL 609 1.800..9114 Outside U.S. 1-60-90-6990 www.tksimplex.com G SERIES IR TORQUE PUMP PRTS IDENTIFICTION MNUL Reference # - TD09 Rev. - Date - 8/10 This illustration is for reference
Plumbing. Controls, Drains, Piping, Flanges, Couplings, Caps and Plugs
Plumbing Hale offers a wide variety of plumbing components to make the pump installation and operation easier for the OEM and End User. Hale controls allow for a clean and compact pump panel. Controls
High Purity Tubing. Temperature Ratings PTFE -200ºC/240ºC (-328ºF/464ºF) FEP -70ºC/180ºC (-94ºF/356ºF) PFA -180ºC/240ºC (-292ºF/464ºF)
Fittings High Purity Tubing IPS offers three types of High Purity Tubing. ll three are classified as High Purity solutions for ultra-clean applications and are excellent with corrosive media. These three
PARTS LIST PRESSURELESS COOKER MODELS: GSX-5HE, GSX-7HE, GSX-10HE
PARTS LIST PRESSURELESS COOKER MODELS: 5HE, 7HE, 10HE CROWN FOOD SERVICE EQUIPMENT LTD. 70 OAKDALE ROAD, DOWNSVIEW, (TORONTO), ONTARIO, M3N 1V9 TELEPHONE: (416) 746-2358, FAX: (416) 746-8324 PRINTED IN
Ultra High Pressure Valves, Fittings and Tubing Pressures to 152,000 psi
Ultra High Valves, ittings and Tubing s to 152,000 psi MXIMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability,
CATALOG Our reputation is stainless
TLOG 2016 Our reputation is stainless 1 INEX GENERL FITTINGS bout Fittings, Inc. How to use this catalog onversions dapters Straight and Elbows dapters Tees and rosses arbed Manifolds arbed Tees, Y-Tees
Check Valves. E Check Valves E-1. Quick Coupling Division 8145 Lewis Road Minneapolis, MN
Check Valves E-1 Check Valves Introduction Multiple Hydraulic System pplications Parker Check Valves are unidirectional flow control devices used primarily in hydraulic systems to eliminate potential damage
QSS: Quick Set System. Product Catalog Compression Sleeve Valves and Fittings to 15,000 psi (1034 bar)
QSS: Quick Set System Product Catalog Compression Sleeve Valves and Fittings to psi (1034 bar) Section Page Introduction.............................. 2 QS Needle Valves........................... 4 QS
WINNIPEG
CALGARY 1-866-629-7847 EDMONTON 1-800-661-7770 SASKATOON 1-800-667-5886 WINNIPEG 1-844-278-5771 1 ammonia hose N2000 century 2000 anhydrous ammonia hose Hig -grade ow per ea on P tu e reinfor ed wit u
Shaft No. of Part # Old No. Model No. Housing Rotation dia Rollers Seals. NOTE: CI = Cast-Iron, N = Ni-Resist, SL = Silver Last
Hypro Roller Pumps Ideal for farm sprayers, pest control and chemical application usage. Housings available in cast-iron, Ni-resist or silver series Self-priming operation; roller pumps should not be run
Engineered. Tested. Qualified.
EXPERIENCE THE DIFFERENCE I N T R O D U C T I O N Engineered. Tested. Qualified. Over the years our customers have experienced a difference in quality, industry support, depth of product line, and customer
Page. Table of Contents. 2 SAE 100R5 HOSE: 151 & 151H Bulk Hose...3 Reusable Fittings...3-4
Table of Contents Page SAE 100R5 HOSE: 151 & 151H Bulk Hose...3 Reusable Fittings...3-4 G1212 NYLON AIR BRAKE: G1212 Bulk Tubing...4 G212 RUBBER AIR BRAKE HOSE: G212 & G212L Bulk Hose...5 G212 Hose Assemblies...5
Hollow Cone Nozzles. The H series nozzle option diverts flow at a right angle without an internal vane, thereby reducing the risk of blockage.
lower energy ring of spray useful for low flow, low impact applications. The internal geometry swirls fluid into a circular ring spray pattern. tomisation occurs at low pressures. The H series nozzle option
PVC Couplings. Brass Couplings BRASS COMPRESSION COUPLING 3 -LENGTH PVC COMPRESSION COUPLING BRASS COMPRESSION COUPLING 5 -LENGTH
& FITT Brass Couplings BRASS COMPRESSION COUPL 3 -LENGTH 46331 3/8 1/2 12 120 5.80 46332 1/2 3/4 12 120 7.38 46333 3/4 1 6 72 10.52 46334 1 1 1/4 6 60 13.44 46335 1 1/4 1 1/2 4 48 18.00 46336 1 1/2 4 36
CHECK VALVES MUELLER CHECK VALVES TECHNICAL DATA. Flare to Flare. Solder to Solder. Solder to Solder - Extended Ends. Shipped loosely assembled.
MUELLER CHECK VLVES TECHNICL DT CHECK VLVES vailable in 1/4 through 5/8 flare sizes and 1/4 thru 7/8 solder sizes. Recognized under the component program of Underwriters Laboratories for use in the US
GUIDELINES The following guidelines are recommended for the proper functioning and the maximum service life of the 630/710 series of connections. Fail
GUIDELINES The following guidelines are recommended for the proper functioning and the maximum service life of the 630/710 series of connections. Failure to follow these guidelines may adversely affect
Product warranty. Quality Policy. The Goal
About the Company SEALEXCEL (INDIA) PVT. LTD. is a fast growing manufacturing company in the field of design, development, production and marketing of high quality valves and fittings for international
SST Series Sand Media Filtration Systems
SST Series Sand Media Filtration Systems Kits and Spare Parts Listing LS-695 (Rev. 6 / 07) Page 1 SST SAND FILTERS Installation Profile Automatic Systems WLS-594B(REV.11/03) Installation Configurations
ELECTRIC SPRAYER CONTROL SYSTEM OWNERS MANUAL
-- AB00 Rev. 0 ELECTRIC SPRAYER CONTROL SYSTEM OWNERS MANUAL REPLACEMENT PARTS READ complete manual CAREFULLY BEFORE attempting operation. DEMCO Dethmers Mfg. Co. P.O. Box 0 0th Street Boyden, IA PH: ()
Edition 1
RAYPEX 800-628-5044 Edition 1 RELATIVE ORDER OF RESISTANCE TO GAS PENETRATION Impurity levels after six hours of flushing with helium 4.5 (100 1/h) Moisture (H20) Oxygen (O2) 1. Stainless Steel 1-2 ppm
CCD-493 KIT SERIES INSTRUCTION SHEET
(COMPLETE CCD-493-W KIT ILLUSTRTED. CUT-OUTS IN TRCK TO EXPOSE COMPONENTS) CCD-493 KIT SERIES INSTRUCTION SHEET CROWDERTRCK S CTCH N CLOSE TM SYSTEM PREVENTS BOUNCING ND SLMMING OF SLIDING S. CN BE INSTLLED
Medical Gas Outlet Adaptor, Fitting and Hose Catalog
2018 Medical Gas Outlet Adaptor, Fitting and Hose Catalog For Clinical Engineering, Biomedical, and Respiratory, Departments 11300 Sanders Drive, Suite 1 Rancho Cordova, CA 95742 (916) 853-1222 Fax (916)
ELECTRIC HYDRAULIC PUMP
SPX Corporation 5885 11th Street Rockford, IL 61109-3699 USA Internet Address: http://www.powerteam.com Tech. Services: (800) 477-8326 Fax: (800) 765-8326 Order Entry: (800) 541-1418 Fax: (800) 288-7031
2016 New Product Catalog. Brass Fittings. & Accessories
2016 New Product Catalog Brass Fittings & Accessories Blank Page Inside Front Cover Table of Contents 04-07 Pipe Fittings & Nipples 08-11 Compression Fittings 12-15 Flare Fittings 16-17 Garden Hose Fittings
Residential R.O. components
Residential R.O. components WATER TREATMENT COMPONENTS 1,8 RESIDENTIAL CSM MEMBRANES 2015 10-01-01-EN 1,8 RESIDENTIAL CSM MEMBRANES Ref. Model Name RE1810-30 DA050A RE1810-50 RE1812-35 DA050 DA051 DA052
D. S. HULL COMPANY, INC
PVC Slip x Female Pipe Adapters Mfg Slip Female Pipe 235736 435-005 1/2 1/2 $0.81 235747 435-007 3/4 3/4 $1.03 235758 435-010 1 1 $1.18 235769 435-012 1-1/4 1-1/4 $1.84 235770 435-015 1-1/2 1-1/2 $2.11
:,Rhino SD/XD G/D 24 Vdc ISO
:,Rhino SD/XDG/D Vdc ISO ()Rhino SD/XD() SD/XD Rhino SD/XDG/D Vdc ISO Rhino SD/XD, Rhino SD/Xd, (Rhino SD/XD) 006 Nordson Corporation P/N 75606A-0 Rhino SD/XDG/D Vdc ISO 0 9 5 8 7 6 P/N 75606A-0 006 Nordson
ATLAS FM FULL METRIC INSERTS CATALOG
TLS F FULL ETRI INSERTS TLOG 915 TLS F FULL ETRI LIND THREDED INSERTS TLS F metric blind threaded inserts offer ideal solutions for blind attachment applications where only one side of a panel is accessible
BRASS FITTINGS (R410a) BRASS FITTINGS
(R410a) R410a Short Barrel Flare Nuts 5010404410A 1/4 $4.21 5010808410A 1/2 $8.52 5010504410A 5/16fl x 1/4 tube $5.73 5011010410A 5/8 $13.50 5010606410A 3/8 $7.08 5011212410A 3/4 $20.54 BRASS FITTINGS
Filters FILTERS FILTERS
Filters Hose Threaded T-Filters...105 Pipe Threaded T Filters...105 Turbo Disclean Filter...107 SmartClean Automatic Screen Filters...108 Jain Y-Filters...109 Plastic Spin Clean Y-Filters...110 Plastic
SANITIZER PARTS SANITIZER PARTS
SANITIZER PARTS 579 AUTOMATIC FEEDER - MODEL 300, 302, 300-19, 300-29 R171026 R171016 Model No.: 300 302 Description: AUTOMATIC FEEDER SPA HOT TUB FEEDER 1 1 R172008W 3 in. threaded cap, white 2 1 R172009
HANDBOOK PIPING ACCESSORIES. Ed PIPING ACCESSORIES AT-ED 01/ ENG 1
HANDBOOK Ed. 2017 AT-ED 01/2017 - ENG 1 CHAPTER 3 ACCESS FITTINGS AND VALVE CORES FOR REFRIGERATION PLANTS THAT USE HCFC, HFC, HC, HFO, OR R744 REFRIGERANTS APPLICATIONS The access fittings illustrated
QUICK SELECTION GUIDE
QUICK SELECTION GUIE HERMETIC FILTER RIERS TYPE FILTER RIER PGE RECOMMENE USE FUNCTION Liquid EK 209 CFC, HCFC, HFC Premium Universal Replacement Liquid K 22 CFC, HCFC High cid and Water Removal Liquid
ONE TOUCH FITTINGS Series WP2
ONE TOUCH FITTINGS - M5 1/ 1/ 3/ 1/2 Features Attractive design Compact size ed nipples of L, T & Y fittings enable plastic portion to turn by 30º Full area of the inner bore of the tubing is available
BACKFLOW PREVENTERS DUAL-CHECK BACKFLOW PREVENTER WITH ATMOSPHERIC VENT T/S-459 Certified to ASSE Standard 1012
CKFLOW PREVENTERS DUL-CHECK CKFLOW PREVENTER WITH TMOSPHERIC VENT T/S-459 Certified to SSE Standard 1012 Certified to CS Standard 64.3 Forged brass construction Threaded or sweat true union end connections
DELUXE TELESCOPING LANCE ASSEMBLY
DELUXE TELESCOPING LANCE ASSEMBLY Products Part # Lenght Inlet Outlet 27.0080 18 3/8 Plug 1/4" QC F 27.0082 24 3/8 Plug 1/4" QC F The product come supplied with: - Non Molded Extension Wand M22 Male Inlet
PRESS FITTINGS FOR PLUMBING AND MECHANICAL APPLICATIONS
PRESS FITTINGS FOR PUMBING ND MECHNIC PPICTIONS JOB NME JOB OCTION ENGINEER CONTRCTOR WHOESER STREMINE PRS TM REP PRODUCT DESCRIPTION: Streamline PRS TM mechanical press copper fittings for use in plumbing
Ball & Socket Fittings (Bauer Style)
Page 96 Ball & Socket Fittings (Bauer Style) Elbow-Bauer Style 3-1/ * *1 MM 76 89 108 133 159 194 2 300 * Locking Bar (part # 9-7318) for & 1 Lever is Sold Separately 6-9038 6-9039 6-9040 6-9041 6-9042