VB-7000 Series. Selection Guide. Applications. Applicable Literature. Selection Guide Contents
|
|
- Rosalyn Walters
- 6 years ago
- Views:
Transcription
1 V-7000 Series Selection Guide T V-7000 Series 1/2 to 2 Globe Vlves with Fort M400, M800, nd M1500 ctutors pplictions T Fort M400, M800, nd M1500 series liner ctutors mount directly 1 onto 1/2 to 2 V-7xxx series two-wy nd three-wy globe vlve bodies. pplictions include chilled or hot wter nd stem. Field selectble input signls include reverse nd direct cting, floting or proportionl 0-10 Vdc, 2-10 Vdc, or 4-20 mdc, nd proportionl sequencing input signl rnges 2. pplicble Literture T Fort M400 nd M800 Instlltion Instructions, DIM119E (F-27506) T Fort M1500 Instlltion Instructions, DIM121E (F-27507) V-811 Instlltion Instructions, F T Vlves ctlog, F ontrol Vlve Sizing, F Selection Guide ontents pplictions... pge 1 Vlve nd ctutor Selection Procedure... pge 2 T V-72xx Series Two-Wy Vlve odies... pge 3 T V-73xx Series Three-Wy Vlve odies... pge 4 T Fort ctutor Model hrt... pge 5 mbient Temperture Restrictions... pge 5 Vlve/ctutor lose-off Pressures... pge 5 Fctory Vlve nd ctutor ssemblies... pge 6 Fort ctutor Dimensions... pge 7 Two-Wy Vlve/ctutor ssembly Dimensions... pge 8 Three-Wy Vlve/ctutor ssembly Dimensions... pge 9 1. V-811 linkge dpter kit required (order seprtely) Vdc, 5-10 Vdc, 2-6 Vdc, nd 6-10 Vdc Printed in U.S.. 8/08 opyright 2008 T. ll rights reserved. F
2 Vlve nd ctutor Selection Procedure 1. Determine the required flow coefficient (v/kvs). Using the required flow nd pressure drop for the ppliction (consult 28, F if necessry), determine the required flow coefficient. 2. Determine vlve body prt number. Select two-wy vlve body from Tble-1 or three-wy mixing or diverting vlve body from Tble-2 hving the required flow coefficient, size, body pttern, end connection, nd temperture/pressure rtings pproprite for the ppliction. 3. Select the Fort ctutor Using the required close-off pressure for the ppliction, consult Tble-5 nd select Fort ctutor hving sufficient close-off pressure on the vlve body selected in Step 2. dditionl Fort ctutor specifictions my be found in Tble-3 or in the Fort Instlltion Instructions sheets shown in pplicble Literture. 4. Determine ssembly Prt Number If complete vlve nd ctutor ssembly is required, consult Tble-3 for the ctutor code of the Fort ctutor selected in Step 3. For the complete ssembly prt number: hnge the vlve body prt number prefix from V to VU. Insert the ctutor code in the third field of the prt number. onfirm the vilbility of the fctory ssembly by consulting Tble-6 (two-wy vlves), Tble-7 (three-wy mixing vlves), or Tble-8 (three-wy diverting vlves). Exmple: Vlve body: V ctutor: M400 (ctutor code 674 from Tble-3) omplete ssembly: VU Fort ctutors re field configured for the desired control signl type nd rnge plus the desired ction. onsult the pproprite Fort Instlltion Instructions for further informtion (see pplicble Literture). 2 opyright 2008 T. ll rights reserved. F
3 Vlve ody nd ctutor Selection Tble-1 T V-72xx Series Two-Wy Vlve odies Two-Wy Vlves Stem Up Open or Stem Up losed 1/2 to 1/1/4 Union ngle nd strightwy 5/8 OD SE Flred 1/2 to 2 Union Swet 1/2 to 2 NPT or Rp Threded Union ngle Union Strightwy ppliction: hilled or Hot Wter SE Flred Union Swet NPT Threded Rp Threded ppliction: Hot Wter or Stem NPT Threded Size 1/2 to 1-1/4 1/2 to 1-1/4 5/8 OD 1/2 to 2 1/2 to 2 15 to 50 mm 1/2 to 2 Vlve ody Prt Number, Stem Up Open V P V P V P V P V P V P V P V P Vlve ody Prt Number, Stem Up losed V P V P V P V P V P V P V P Flow Type Equl % Modified Liner ody ronze ronze Set ronze Stinless Steel Mteril Stem Stinless Steel Stinless Steel Plug rss Stinless Steel Pcking Spring Loded TFE/EPDM Spring Loded TFE Disc EPDM Teflon None Pressure lss NSI 250 Up to 400 F (204 ) below 150 F (65 ) ISO PN16 Mximum Inlet Pressure, Stem 35 PSIG (241 kp) 100 PSIG (690 kp) 150 PSIG (1034 kp) llowble ontrol Medi Temperture 20 F to 281 F (-7 to 138 ) 20 to 340 F (-7 to 171 ) 20 to 400 F (-7 to 205 llowble Differentil Pressure, Wter b 35 PSI (241 kp) for Norml Life 35 PSIG (241 kp) 35 PSIG (241 kp) llowble Differentil Pressure, Stem b 20 PSI (138 kp) 35 PSI (241 kp) 50 PSI (345 kp) To Select Port ode (P) P ode Vlve Size v (kvs) Rting (0.34) 0.4 (0.34) 0.4 (0.34) 0.4 (0.34) 0.4 (0.34) 0.4 (0.34) 0.4 (0.34) 02 1/2 1.3 (1.1) 1.3 (1.1) 1.3 (1.1) 1.3 (1.1) 1.3 (1.1) 1.3 (1.1) 1.3 (1.1) 03 (15 mm) 2.2 (1.9) 2.2 (1.9) 2.2 (1.9) 2.2 (1.9) 2.2 (1.9) 2.2 (1.9) 2.2 (1.9) (4.3) 4.4 (3.8) 4.4 (3.8) 4.4 (3.8) 4.4 (3.8) 4.4 (3.8) 4.4 (3.8) (4.7) 5.5 (4.7) 5.5 (4.7) 5.5 (4.7) 5.5 (4.7) 5.5 (4.7) 3/4 (20 mm) (7.4) 7.5 (6.5) 7.5 (6.5) 7.5 (6.5) 7.5 (6.5) 7.5 (6.5) (12) 10 (8.6) 10 (8.6) 10 (8.6) 10 (8.6) 10 (8.6) 1 (25 mm) (14) 14 (12) 14 (12) 14 (12) 14 (12) 14 (12) /4 (32 mm) 22 (19) 20 (17.3) 20 (17.3) 20 (17.3) 20 (17.3) 20 (17.3) /2 (40 mm) 28 (21.2) 28 (21.2) 28 (21.2) 28 (21.2) 11 2 (50 mm) 40 (34.6) 40 (34.6) 40 (34.6) 40 (34.6) 15 to 50 mm vlves with metric thred Rp 1/2 to Rp 2 b Mximum recommended differentil in full open position. Do not exceed recommended differentil pressure (pressure drop) or integrity of prts my be ffected. F opyright 2008 T. ll rights reserved. 3
4 Tble-2 T V-73xx Series Three-Wy Vlve odies Three-Wy Vlves ppliction: hilled or Hot Wter Mixing or Diverting 5/8 OD SE Flred 1/2 to 2 NPT or Rp Threded 1/2 to 2 Union Swet SE Flred NPT Threded Rp Threded Union Swet NPT Threded Size 5/8 OD 1/2 to 2 15 to 50 mm 1/2 to 2 1/2 to 2 Vlve ody Prt Number, Mixing V P V P V P b V P Vlve ody, Prt Number Diverting c V P Flow Type Equl % Mteril ody Set Stem Plug Pcking Disc ronze ronze Stinless Steel rss Spring Loded TFE/EPDM None Pressure lss NSI 250 Up to 400 F (204 ) below 150 F (65 ) ISO PN16 llowble ontrol Medi Temperture llowble Differentil Pressure, Wter d 20 F to 281 F (-7 to 138 ) 35 PSI (241 kp) for Norml Life To Select Port ode (P) P ode Vlve Size v (kvs) Rting 02 1/2 2.2 (1.9) 2.2 (1.9) 2.2 (1.9) 04 (15 mm) 4.4 (3.8) 4.4 (3.8) 4.4 (3.8) 4.4 (3.8) (6.5) 7.5 (6.5) 7.5 (6.5) 1 (25 mm (12) 14 (12) 15 (13) /4 (32 mm) 20 (17.3) 20 ( (17.3) /2 (40 mm) 28 (21.2) 28 (21.2) 28 (21.2) 11 2 (50 mm) 41 (36) 40 (34.6) 40 (34.6) On V-7313 nd V-7315 mixing vlves, port is the common port (locted on the side) nd ports nd re inlets. Flow is from to when the vlve stem is in up position (port closed). Flow is from to when vlve stem is in down position (port closed). b 15 to 50 mm vlves with metric thred Rp 1/2 to Rp 2 c On V-7323 diverting vlves, inlet port is the common port (locted on the bottom) nd ports nd re outlets. When the vlve stem is in the up position, flow is from to (port closed). When the vlve stem is in the down position, flow is from port to (port closed). d Mximum recommended differentil in full open position. Do not exceed recommended differentil pressure (pressure drop) or integrity of prts my be ffected. 4 opyright 2008 T. ll rights reserved. F
5 Tble-3 T Fort ctutor Model hrt Model ctutor ode Force, lbf (N) Power Running V Trnsformer Sizing V Floting ontrol Proportionl ontrol Feedbck (2) SPDT uxiliry Switches M400 c 674 M400-S2 c b 90 (400) Vdc, M800 c 680 No Vc ±10% 2-10 Vdc, Yes 2-10 Vdc (800) 50/60 Hz or M800-S2 c b 4-20 mdc 24 Vc 4 M1500 c 686 No (1500) M1500-S2 c b 24 Vc 4 DIP switch selectble. b No ctutor code. No fctory ssemblies offered. c V-811 linkge (order seprtely) required for mounting ctutors to V-7xxx globe vlve bodies. Do not use M1500 on V-7323 three-wy vlves. No 24 Vc 4 Tble-4 Restrictions on mbient Temperture for Fort Vlve ctutors Fluid Temperture in Vlve ody Mximum llowble mbient Temperture hilled Wter 122 F (50 ) 281 F (138 ) 113 F (45 ) 300 F (149 ) 107 F (42 ) 340 F (171 ) 100 F (38 ) Note: When instlling vlve nd ctutor ssemblies, observe the minimum nd mximum fluid nd mbient temperture limits shown in Tble-1, Tble-2, nd Tble F (186 ) 90 F (32 ) Minimum llowble mbient operting temperture 14 F (-10 ) Tble-5 Select Vlve/ctutor ombintion Hving Sufficient lose-off for ppliction Vlve ody lose-off Rtings, psi (kp) Two-Wy Vlves P ode Size M400 M800 M1500 V P V P V P V P V P V P V P V P V P V P V P V P V P V P V P -1, -2, -3, -4 1/2 (15 mm) 250 (1712) 250 (1712) -5, -6 3/4 (20 mm) 198 (1356) 250 (1712) -7, -8 1 (25 mm) 92 (630) ) /4 (32 mm) 56 (384) 130 (890) /2 (40 mm) 37 (253) 88 (603) 177 (1212) (50 mm) 19 (130) 48 (329) 98 (671) Three-Wy Vlves P ode Size M400 M800 M1500 b -2, -4 1/2 (15 mm) 250 (1712) 250 (1712) -6 3/4 (20 mm) 198 (1356) 250 (1712) V P V P V P V P -8 1 (25 mm) 92 (630) ) /4 (32 mm 56 (384) 130 (890) /2 (40 mm) 37 (253) 88 (603) (50 mm) 19 (130) 48 (329) V P -4, -6, -8, -9, -10, -11 1/2 to (1712) Do Not Use b b V-811 linkge (order seprtely) required for mounting V-7xxx vlve bodies. Do not use M1500 on V-7323 three-wy vlves. F opyright 2008 T. ll rights reserved. 5
6 Fctory ssemblies Tble-6 Fctory Vlve nd ctutor ssemblies Two-Wy Vlves ctutor Model (ctutor ode b ) Vlve ssembly Prt Number b P ode b Size M400 (674) M800 (680) M1500 (686) 1, 2, 3, 4 1/2 X 5, 6 3/4 X X VU-7213-xxx-4-P VU-7253-xxx-4-P VU-7273-xxx-4-P 7, 8 1 X X 9 1-1/4 X X /2 X X X 11 2 X X X b See Tble-5 for close-off pressures Insert ctutor ode in third field of ssembly prt number. Insert P ode in lst field of ssembly prt number. Tble-7 Fctory Vlve nd ctutor ssemblies Three-Wy Mixing Vlves ctutor Model (ctutor ode b ) Vlve ssembly Prt Number b P ode b Size M400 (674) M800 (680) 2, 4 1/2 X 6 3/4 X VU-7313-xxx-4-P 8 1 X 9 1-1/4 X /2 X X 11 2 X X b See Tble-5 for close-off pressures Insert ctutor ode in third field of ssembly prt number. Insert P ode in lst field of ssembly prt number. Tble-8 Fctory Vlve nd ctutor ssemblies Diverting Vlves ctutor Model (ctutor ode b ) Vlve ssembly Prt Number b P ode b Size M400 (674) 4 1/2 X 6 3/4 X VU-7323-xxx-4-P 8 1 X 9 1-1/4 X /2 X 11 2 X b See Tble-5 for close-off pressures Insert ctutor ode in third field of ssembly prt number. Insert P ode in lst field of ssembly prt number. 6 opyright 2008 T. ll rights reserved. F
7 Dimensions 3-1/4" (82 mm) 4-19/32" (117 mm) 9-17/32 (242 mm) 6-5/16" (173 mm) 12-13/32" (315 mm) llow 3 (76 mm) min. clernce for cover removl D Figure-1 Fort ctutor Dimensions V P Union ngle V P NPT Threded V P Rp Threded V P NPT Threded V P NPT Threded V P SE Flred V P Union Strightwy V P Union Swet V P NPT Threded V P Rp Threded V P NPT Threded V P NPT Threded V P 5/8 OD SE Flred V P Union Strightwy V P Union Swet Figure-2 Two Wy V-7xxx Vlve ody Dimensions F opyright 2008 T. ll rights reserved. 7
8 Tble-9 Dimensions Two-Wy Vlves (see Figure-1 nd Figure-2) Vlve ody Prt Number Size Dimensions in Inches (mm) D 1/2 3-1/8 (79) 1-5/8 (41) 3/4 (19) 10-9/32 (261) V P 3/4 3-5/8 (92) 1-11/16 (43) 15/16 (24) 10-15/32 (266) 1 4-1/16 (103) 1-15/16 (49) 1-1/4 (32) 10-25/32 (274) 1-1/4 4-5/16 (110) 2-3/16 (56) 1-11/16 (43) 11-7/32 (285) 1/2 ' 4-3/16 (106) 1-1/16 (27) 1-1/8 (29) 10-21/32 (271) V P 3/4 4-15/16 (125) 1-1/16 (27) 1-1/8 (29) 10-21/32 (271) 1 6 (152) 1-1/8 (29) 1-3/16 (30) 10-23/32 (272) 1-1/4 6-1/4 (159) 1-3/8 (35) 1-7/16 (37) 10-31/32 (279) V P 5/8 O.D. 4 (102) 1-1/16 (27) 1-1/8 (29) 10-21/32 (271) 1/2 (15 mm) 3 (76) 1-1/16 (27) 1-1/8 (29) 10-21/32 (271) 3/4 (20 mm) 3-5/8 (92) 1-1/16 (27) 1-1/8 (29) 10-21/32 (271) V P V P V P V P 1 (25 mm) 4-5/8 (117) 1-1/8 (29) 1-3/16 (30) 10-23/32 (272) 1-1/4 (32 mm) 4-5/8 (117) 1-3/8 (35) 1-7/16 (37) 10-31/32 (279) 1-1/2 (40 mm) 5-3/8 (137) 1-1/2 (38) 1-7/8 (48) 11-13/32 (290) 2 (50 mm) 6-1/8 (156) 1-9/16 (40) 2-1/854) 11-21/32 (296) 1/2 4-3/16 (106) 1-1/16 (27) 1-1/8 (29) 10-21/32 (271) 3/4 5-7/16 (138) 1-1/16 (27) 1-1/8 (29) 10-21/32 (271) V P 1 6-5/8 (168) 1-1/8 (29) 1-3/16 (30) 10-23/32 (272) 1-1/4 6-13/16 (173) 1-3/8 (35) 1-7/16 (37) 10-31/32 (279) 1-1/2 8-5/16 (211) 1-1/2 (38) 1-7/8 (48) 11-13/32 (290) 2 9-3/16 (233) 1-9/16 (40) 2-1/854) 11-21/32 (296) 1/2 4-3/16 (106) 1-1/4 (32) 1-1/8 (29) 10-21/32 (271) V P 3/4" 4-15/16 (125) 1-1/4 (32) 1-1/8 (29) 10-21/32 (271) 1" 6 (152) 1-3/4 (45) 1-3/16 (30) 10-23/32 (272) 1-1/4" 6-1/4 (159) 1-3/4 (45) 1-7/16 (37) 10-31/32 (279) V P 5/8 OD 4 (102) 1-1/4 (32) 1-1/8 (29) 10-21/32 (271) 1/2 (15 mm) 3-1/16 (78) 1-3/16 (30) 1-1/8 (29) 10-21/32 (271) 3/4 (20 mm) 3-5/8 (92) 1-3/16 (30) 1-1/8 (29) 10-21/32 (271) V P V P V P V P 1 (25 mm) 4-5/8 (117) 1-3/4 (44) 1-3/16 (30) 10-23/32 (272) 1-1/4 (32 mm) 4-5/8 (117) 1-3/4 (44) 1-7/16 (37) 10-31/32 (279) 1-1/2 (40 mm) 5-3/8 (137) 1-13/16 (46) 1-9/16 (40) 11-3/32(282) 2 (50 mm) 6-1/8 (156) 2-1/4 (57) 1-5/8 (42) 11-5/32 (283) 1/2 4-3/16 (106) 1-1/4 (32) 1-1/8 (29) 10-21/32 (271) 3/4" 5-7/16 (138) 1-1/4 (32) 1-1/8 (29) 10-21/32 (271) V P 1" 6-5/8 (168) 1-3/4 (45) 1-3/16 (30) 10-23/32 (272) 1-1/4" 6-13/16 (173) 1-3/4 (45) 1-7/16 (37) 10-31/32 (279) 1-1/2" 8-5/16 (211) 1-13/16 (45) 1-9/16 (40) 11-3/32(282) 2" 9-3/16 (233) 2-1/16 (53) 1-5/8 (42) 11-5/32 (283) ssembly height, centerline of vlve body to top of ctutor (see Figure-1). Leve n dditionl 3 (76 mm) clernce for cover removl. 8 opyright 2008 T. ll rights reserved. F
9 V P SE Flred V P NPT Threded V P Rp Threded V P NPT Threded V P Union Swet Figure-3 Three-Wy V-73xx Vlve ody Dimensions Tble-10 Dimensions Three-Wy Vlves (see Figure-1 nd Figure-3) Vlve ody Prt Number Size Dimensions in Inches (mm) D V P 5/8 OD 4 ( /4 (57) 1-1/8 (29) 10-21/32 (271) 1/2 (15 mm) 3-1/16 (76) 1-3/4 (44) 1-1/8 (29) 10-21/32 (271) 3/4 " (20 mm) 3-5/8 (92) 1-13/16 (46) 1-1/8 (29) 10-21/32 (271) V P V P 1" (25 mm) 4-5/8 (118) 1-3/4 (44) 1-3/16 (30) 10-23/32 (272) 1-1/4" (32 mm) 4-5/8 (118) 1-3/4 (44) 1-7/16 (37) 10-31/32 (279) 1-1/2" (40 mm) 5-3/8 (137) 1-13/16 (46) 1-9/16 (40) 11-3/32(282) 2" (50 mm) 6-1/8 (156) 2-1/4 (57) 1-5/8 (42) 11-5/32 (283) 1/2" 4-3/16 (106) 2-5/16 (59) 1-1/8 (29) 10-21/32 (271) 3/4" 5-7/16 (138) 2-5/8 (67) 1-1/8 (29) 10-21/32 (271) V P 1" 6-5/8 (168) 3-3/16 (81) 1-3/16 (30) 10-23/32 (272) 1-1/4" 6-13/16 (173) 3-7/16 (87) 1-7/16 (37) 10-31/32 (279) 1-1/2" 8-5/16 (211) 3-3/4 (95) 1-9/16 (40) 11-3/32(282) 2" 9-3/16 (233) 4-3/16 (106) 1-5/8 (42) 11-5/32 (283) 1/2" 3-1/16 (76) 1-3/8 (35) 1-1/8 (29) 10-21/32 (271) 3/4" 3-5/8 (92) 1-11/16 (43) 1-1/8 (29) 10-21/32 (271) V P 1" 4-5/8 (118) 1-9/16 (40) 1-3/16 (30) 10-23/32 (272) 1-1/4" 4-5/8 (118) 1-5/8 (41) 1-7/16 (37) 10-31/32 (279) 1-1/2" 5-3/8 (137) 1-11/16 (43) 1-9/16 (40) 11-3/32(282) 2" 6-1/8 (156) 1-7/8 (48) 1-5/8 (42) 11-5/32 (283) ssembly height, centerline of vlve body to top of ctutor (see Figure-1). Leve n dditionl 3 (76 mm) clernce for cover removl. F opyright 2008 T. ll rights reserved. 9
10 Selection Guide V-8000 Series V-9313 Series T V-8000 Series nd V-9000 Series 2-1/2 to 6 Globe Vlves with T Fort M800 nd M1500 ctutors pplictions T Fort M800, nd M1500 series liner ctutors mount directly onto 2-1/2 to 6 V-8xxx series nd V-9313 series two-wy nd three-wy globe flnged vlve bodies. pplictions include chilled or hot wter nd stem. Field selectble input signls include reverse nd direct cting, floting or proportionl 0-10 Vdc, 2-10 Vdc or 4-20 m, nd proportionl sequencing input signl rnges. pplicble Literture T Fort M400 nd M800 Instlltion Instructions, DIM119 (F-27506) T Fort M1500 Instlltion Instructions, DIM121 (F-27507) V-812 Instlltion Instructions, F T Vlves ctlog, F ontrol Vlve Sizing, F Selection Guide ontents pplictions pge 1 Vlve nd ctutor Selection Procedure pge 1 T V-8000 Series Vlve odies pge 2 T V-9000 Series Vlve odies pge 3 Vlve/ctutor lose-off Pressures pge 4 T Fort ctutor Model hrt pge 4 mbient Temperture Restrictions pge 4 lose-off Pressure nd V-8xxx Mximum Operting Pressure Differentil pge 4 Fctory Vlve nd ctutor ssemblies pge 5 V-8xxx nd V-9313 Vlve ody ction pge 5 Fort ctutor nd Vlve ody Dimensions pge 6 V-8xxx Dimensions pge 7 V-9313 Dimensions Pge 7 Vlve nd ctutor Selection Procedure 1. Determine the required flow coefficient (v/kvs). Using the required flow nd pressure drop for the ppliction, determine the required flow coefficient (consult 28, F if necessry). 2. Determine vlve body prt number. Select flnged V-8xxx vlve body from Tble-1 or flnged V-9313 vlve body from Tble-2 hving the required flow coefficient, size, body pttern, end connection, nd temperture/pressure rtings pproprite for the ppliction. 3. Select the Fort ctutor Using the required close-off pressure for the ppliction, consult Tble-5 nd select Fort ctutor hving sufficient close-off pressure on the vlve body selected in step 2. For vlve/ctutor combintions using V-8xxx vlve bodies, lso consult Tble-5 for mximum operting pressure differentil limittions. dditionl Fort ctutor specifictions my be found in Tble-3 or in the Fort Instlltion Instructions sheets shown in pplicble Literture. If necessry, use the dimensionl informtion in Figure-1, Figure-2, Tble-8, nd Tble-9 to confirm tht the vlve-ctutor ssembly will fit in the vilble spce. 4. Determine ssembly Prt Number If complete fctory vlve nd ctutor ssembly is required, consult Tble-3 for the ctutor code of the Fort ctutor selected in Step 3. For the complete ssembly prt number: hnge the vlve body prt number prefix from V to VU. Insert the ctutor code in the third field of the prt number. onfirm the fctory ssembly is vilble in Tble-6 Exmple: Vlve body: V ctutor: M1500 (ctutor code 686 from Tble-3) omplete ssembly: VU Fort ctutors re field configured for the desired control signl type nd rnge plus the desired ction. onsult the pproprite Fort Instlltion Instructions for further informtion (see pplicble Literture). Printed in U.S.. 8/08 opyright 2008 T. ll rights reserved. F
11 Vlve ody nd ctutor Selection Tble-1 T V-8213, V-8223, nd V-8303 Vlve odies ppliction hilled or Hot Wter, Stem Two-Wy Flnged hilled or Hot Wter Three-Wy Flnged Two-Wy nd Three-Wy Vlves Two-wy Stem Up Open or Stem Up losed Three-wy Mixing/Diverting S 125 Flnged st Iron ody Size 2-1/2 to 6 2-1/2 to 6 2-1/2 to 6 Vlve ody Prt Number V P V P V P Vlve ody ction 2-Wy Stem Open 2-Wy Stem Up losed 3-Wy Mixing/Diverting Linkge Kit Prt Number V-812 b Flow Type Equl % Equl % Modifier Liner ody st Iron st Iron st Iron Set Forged rss Forged rss Forged rss Mteril Stem Stinless Steel Stinless Steel Stinless Steel Plug Forged rss Forged rss Forged rss Pcking Spring Loded TFE/EPDM Spring Loded TFE/EPDM Spring Loded TFE/EPDM Set Ring EPDM EPDM None NSI Pressure lss, psig 125 Mximum Inlet Pressure Stem psig (kp) 35 psig (241 kp) llowble ontrol Medi 20 F to 281 F Temperture, F ( ) c ( 7 to 138 ) lose-off Pressure, psi (kp) 125 psi (856 kp) d 35 psi (241 kp) d P ode Vlve Size, In. v (k vs ) v (k vs ) v (k vs ) Mixing e Diverting f /2 56 (48) 56 (48) 80 (69) 95 (82) g 115 (99) h (74) 85 (74) 110 (95) 120 (104) i (125) 145 (125) 190 (164) 190 (164) i (208) 240 (208) 290 (251) 290 (251) i (320) 370 (320) 500 (433) 500 (433) i V-8303 vlves my be used s either mixing or diverting vlves. V-8303 vlves will lso operte stisfctorily s two-wy ngle vlves if either end (side) port is closed off. b V-812 linkge kit included with M1500 ctutor. Purchse seprtely for M800 ctutors. c UTION: Freeze protection required for tempertures below 32 F (0 ). void ice formtion on stems. d Vlve in closed position. See Tble-5 for mximum llowble V-8xxx differentil pressure for vlve in ny open position. e Mixing configurtion, ports nd re inlets, port is outlet. Port locted on bottom. f Diverting configurtion, port is inlet, ports nd re outlets. Port locted on bottom. g Diverting configurtion, flow to ports. h Diverting configurtion, flow to ports. i ll diverting flow configurtions, flow to either or ports. 2 opyright 2008 T. ll rights reserved. F
12 Tble-2 T V-9313 Vlve odies ppliction hilled or Hot Wter Three-Wy Vlves Three-wy mixing NSI 125 Flnged st Iron ody S Flnged Size 2-1/2 to 6 Vlve ody Prt Number Linkge Kit Prt Number V P V-812 Flow Type Mixing b ody st Iron Set st Iron Mteril Stem Stinless Steel Plug rss Pcking Spring Loded TFE/EPDM Disc None NSI Pressure lss, psig 125 llowble ontrol Medi Temperture, F ( ) c 40 F to 281 F (4 to 138 ) llowble Differentil Pressure, Wter, psi (kp) d 35 psi (241 kp) P ode Vlve Size, In. v (k vs ) Rting /2 67 (58) (79) (147) (251) (337) b c d V-812 linkge kit included with M1500 ctutor. Purchse seprtely for M800 ctutors. Port is the common port, ports nd re inlets. Flow is from to when vlve stem is in up position (port closed). Flow is from port to when vlve stem is down (port closed). ommon port is on the side. UTION: Freeze protection required for tempertures below 32 F (0 ). void ice formtion on stems. Mximum recommended differentil in full open position. Do not exceed recommended differentil pressure (pressure drop) or integrity of prts my be ffected. F opyright 2008 T. ll rights reserved. 3
13 Tble-3 T Fort ctutor Model hrt Model ctutor ode Force, lbf (N) Power Running V Trnsformer Sizing V Floting ontrol Proportionl ontrol Feedbck (2) SPDT uxiliry Switches Linkge M No (800) 0-10 Vdc, M800-S2 b 24 Vc ±10% 24 Vc Vdc, Yes 2-10 Vdc 50/60 Hz or M mdc No (1500) M1500-S2 b 24 Vc 4 V-812 (purchse seprtely) b DIP switch selectble No ctutor code. No fctory ssemblies offered. Tble-4 mbient Temperture Restrictions for Fort Vlve ctutors Fluid Temperture in Vlve ody hilled Wter Mximum llowble mbient Temperture 122 F (50 ) 281 F (138 ) 113 F (45 ) 300 F (149 ) 107 F (42 ) 340 F (171 ) 100 F (38 ) 366 F (186 ) 90 F (32 ) Minimum llowble mbient operting temperture 14 F (-10 ) Note: When instlling vlve nd ctutor ssemblies, observe the minimum nd mximum fluid nd mbient temperture limits shown in Tble-1, Tble-2, nd Tble-4. 4 opyright 2008 T. ll rights reserved. F
14 Tble-5 Select Vlve/ctutor ombintion Hving Sufficient lose-off for ppliction lose-off Rtings, psi (kp) Mximum Operting Pressure Differentil, psi (kp) Vlve ody P ode Size M800 M800-S2 M1500 M1500-S2 M1500 M1500-S2 V P 125 (856) V P -12, -13, -14, 2-1/2 to 6 Do Not Use -15, -16 b V P 35 (241) 35 (241) c V P /2 29 (199) 61 (418) (130) 42 (288) (68) 22 (151) (96) (62) Note: Do not use M400 or M400-S2 ctutors on 2-1/2 to 6 V-8xxx or V-9313 vlve bodies. V-812 linkge dpter kit required for mounting (order seprtely). b M800 nd M800-S2 ctutors re not comptible with V-8xxx vlve bodies. c Mximum differentil in ny open position. For proper V-8xxx vlve opertion, do not exceed Mximum Operting Pressure Differentil. Fctory ssemblies Tble-6 Fctory Vlve nd ctutor ssemblies V-8000 Series Vlve ssembly Prt Number P ode Size ctutor Model (ctutor ode b ) M1500 (686) V-9313 Series Vlve ssembly Prt Number P ode Size ctutor Model (ctutor ode b ) M800 (680) M1500 (686) /2 X /2 X X VU-8213-xxx-5-P VU-8303-xxx-5-P 13 3 X 13 3 X X 14 4 X VU-9313-xxx-5-P 14 4 X X 15 5 X 15 5 X 16 6 X 16 6 X b Insert P code in lst field of ssembly prt number. Insert ctutor code in third field of ssembly prt number. Tble-7 V-8xxx nd V-9313 Vlve ody ction Vlve ody/ Vlve ssembly Vlve ody Description Stem Up Position ction (s ctutor strokes nd vlve stem goes down) V P VU-8213-xxx-5-P Two-Wy Stem up open Vlve open to flow decreses V P Two-wy stem up closed Vlve closed to flow increses V P VU-8303-xxx-5-P Three-wy mixing Three-wy diverting Flow to Flow to to flow decreses to flow increses (common port bottom) to flow decreses to flow increses (common port bottom) V P VU-9313-xxx-5-P Three-wy mixing Flow to to flow decreses to flow increses (common port side) F opyright 2008 T. ll rights reserved. 5
15 Dimensions 4-19/32" (117 mm) 6-5/16" (173 mm) llow 3 (76 mm) min. clernce for cover removl 3-1/4" (82 mm) 9-17/32 (242 mm) 12-13/32" (315 mm) D Figure-1 Fort ctutor Dimensions 1/2" - 20 Threds 1/2" - 20 Threds 1/2" - 20 Threds 1-1/4" - 16 Threds 1-1/4" - 16 Threds 1-1/4" - 16 Threds V P V P See Tble-X for Flnge Detil V P V P V P V P Flnge Dimensions H J Nominl Pipe Size Flnge Dimeter E Flnges Drilling olting Flnge Thickness F Dimeter of olt ircle G Dimeter of olt Holes H Number of olts Dimeter of olts Length of Mchine olts J G E E F 2-1/ / /16 3/4 15/16 15/ / /2 8-1/2 9-1/2 3/4 7/ /8 3/4 2-1/ /4 Figure-2 V-8xxx nd V-9xxx Vlve ody nd Flnge Dimensions 6 opyright 2008 T. ll rights reserved. F
16 Tble-8 V-8xxx Dimensions (see Figure-1 nd Figure-2) Vlve ody Prt Number Size, Inches Dimensions in Inches (mm) D b 2-1/2 8-9/16 (217) 4 (102) 3-3/8 (86) 9-17/32 (242) 3 9-1/2 (241) 4-5/8 (117) 3-3/4 (95) 9-17/32 (242) V P /2 (292) 5-1/2 (140) 4-1/2 (114) 9-17/32 (242) 5 13 (330) 6-15/16 (176) 5-13/16 (148) 9-17/32 (242) 6 14 (356) 7-1/2 (191) 9-3/16 (233) 9-17/32 (242) 2-1/2 8-9/16 (217) 4 (102) 3-11/16 (94) 9-17/32 (242) 3 9-1/2 (241) 4-1/4 (108) 4-1/16 (103) 9-17/32 (242) V P /2 (292) 4-15/16 (125) 5-5/16 (135) 9-17/32 (242) 5 13 (330) 5-7/16 (138) 6-11/16 (170) 9-17/32 (242) 6 14 (356) 6-1/4 (159) 10-3/8 (264) 9-17/32 (242) 2-1/2 8-9/16 (217) 5-7/16 (138) 3-1/16 (78) 9-17/32 (242) 3 9-1/2 (241) 6-3/8 (162) 3-11/16 (94) 9-17/32 (242) V P /2 (292) 8-7/16 (214) 4-5/16 (110) 9-17/32 (242) 5 13 (330) 8-13/16 (224) 5-5/8 (143) 9-17/32 (242) 6 14 (356) 9-3/4 (248) 9 (229) 9-17/32 (242) See Figure-2 for flnge dimensions b ssembly height, centerline of vlve body to top of ctutor (see Figure-1). Leve n dditionl 3 (76 mm) clernce for cover removl. Tble-9 V-9313 Dimensions (see Figure-1 nd Figure-2) Vlve ody Prt Number Size, Inches Dimensions in Inches (mm) D b 2-1/2 8-9/16 (217) 5-3/8 (137) 3-1/2 (89) 9-17/32 (242) 3 9-1/2 (241) 6-3/8 (162) 3-3/4 (95) 9-17/32 (242) V P /2 (292) 8-1/2 (216) 4-1/2 (114) 9-17/32 (242) 5 13 (330) 8-3/4 (222) 5 (127) 9-17/32 (242) 6 14 (356) 9-3/4 (248) 5-7/8 (149) 9-17/32 (242) See Figure-2 fo flnge dimensions. b ssembly height, centerline of vlve body to top of ctutor (see Figure-1). Leve n dditionl 3 (76 mm) clernce for cover removl. F opyright 2008 T. ll rights reserved. 7
17 opyright 2008, T ll brnd nmes, trdemrks nd registered trdemrks re the property of their respective owners. Informtion contined within this document is subject to chnge without notice. F T 1354 lifford venue P.O. ox 2940 Loves Prk, IL
3-Way Ball Valve Assemblies Using TAC DuraDrive Actuators
3-Wy Bll Vlve Assemblies Using TAC DurDrive Actutors Note: All vlve sizes ANSI Clss IV (0.01% of C v ) shut off, piped coil-side outlet to A. Tble-5 Selection Chrt3-Wy Mixing Bll Vlve Assemblies with TAC
More informationVB-7000 Series 1/2 to 2 Globe Valves
V-7000 Series 1/2 to 2 Globe Valves with MG350V Series SmartX ctuators schneider-electric.com 1 Product Description Schneider Electric MG350V non-spring actuators and V-7000 series two and three-way globe
More informationVB-8000 Series VB-9313 Series. Selection Guide. Applications. Applicable Literature. Selection Guide Contents. Valve and Actuator Selection Procedure
Selection Guide VB-8000 Series VB-9313 Series Schneider ElectricVB-8000 Series and VB-9000 Series 2-1/2 to 6 Globe Valves with Schneider Electric NSR Forta M800A and M1500A Actuators Applications Schneider
More informationKit Description. Adapter Kit for Johnson Controls 1 / 2 to 2 VG7xxxxx, VB-3754, VB-3974, VB-4322, and VB-4324 Two- and Three-Way Globe Valves
Selection Guide TAC 1354 Clifford Avenue P. O. Box 2940 Loves Prk, IL 61132-2940 www.tc.com AV-8xx Series Competitive Gloe Adpters AV-8xx Series Adpter Kits TAC AV-8xx Series Adpter Kits mount on the onnet
More informationSeries 250 Type and Type Pneumatic Control Valves Type 3251 Globe Valve
Series 250 Type 3251-1 nd Type 3251-7 Pneumtic Control Vlves Type 3251 Globe Vlve DIN version Appliction Control vlve for process engineering pplictions with high industril requirements Nominl size DN
More information3-Way Linked Globe Valve Assemblies with Linear Series Actuators
Linked Globe Valve ssemblies with Linear Series ctuators Note: hoose a valve assembly having a close-off pressure capability sufficient for the application. Not all valve body and actuator combinations
More informationKit Description. to 3 / 4. VG7xxxxT Two- and Three-Way Globe Valves. VG7xxxxS, VG7xxxxT, and VTM Twoand Three-way Globe Valves / 4
AV-800 Series Competitive Gloe Vlve Adpters AV-8xx Series Adpter Kits Schneider Electric AV-8xx Series Adpter Kits mount on the onnet of competitors vlves to llow replcement of the ctutor with n pproprite
More informationData Sheet T /4/5/6 EN
Dt heet T 8310-1/4/5/6 EN Pneumtic Actutors up to 750v2 cm² Type 3271 Type 3277 for integrl positioner ttchment Appliction Liner ctutors prticulrly suitble for ttchment to eries 240, 250, 280 nd 290 Vlves
More informationSHEET 1 OF 6
REVISIONS REV DESCRIPTION CHG.NO. PP'D DTE SENSOR WELD NECK MOUNTING FLNGE & WELD FTG. (FCTORY WELDED) VILBLE IN SME B16.5 RF & RTJ, ND EN 1092-1 RF. REFER TO TBLE 1 ON SHEET 2 OR FOR S ND DIMENSIONS NEW
More informationTFM 1600 Seat Body Material: Stainless. PTFE Seat Body Material: Stainless and Brass. Catalog No. V81-5 Sept. 2008
Ctlog No. V81-5 Sept. 2008 Vlve with lever hndle Working pressure sets: 68.9 br (1000 psig) TFM sets: 137 br (2000 psig) Vlve with butterfly hndle Working pressure sets: 68.9 br (1000 psig) TFM sets not
More informationSpring Return DuraDrive Two-Position Actuator
MA40-704x Series, MA4-707x Series, nd MA4-75x Series Spring Return DurDrive Two-Position Actutor For spring return pplictions tht require twoposition control of dmpers nd vlves in HVAC system. Fetures:
More information2/2, 3/2 and 4/2 directional poppet valve with solenoid actuation
0/0 /, / nd / directionl poppet vlve with solenoid ctution.7 Type M-.SEW...LX Size Up to 0 r Up to 0 L/min Contents Function nd configurtion Symols 0 Specifiction 0 Technicl dt 0 Electricl dt 0 Chrcteristic
More informationPneumatic Actuators 1000, 1400, 2800, and 2 x 2800 cm² Type 3271 and Type 3277 for integral positioner attachment Hand-operated Actuator Type 3273
Pneumtic Actutors 000, 400, 2800, nd 2 x 2800 cm² Type 27 nd Type 277 for integrl positioner ttchment nd-operted Actutor Type 27 Appliction Liner ctutor in prticulr for ttchment to Series 240, 250, nd
More informationCV3000 Series Smart-Port Single Seated Control Valves with Steam Jacket Model HLS
No. SS2-8113-0220 CV3000 Series Smrt-Port Single Seted Control Vlves with Stem Jcket Model HLS OVERVIEW Model HLS Smll-Port Single Seted Control Vlves with Stem Jcket re designed for hevy duty service
More informationBERMAD Waterworks. 400 Series. Basic Valve. ??????? WW-400 Basic Valve
Bsic Vlve??????? WW-400 Bsic Vlve The bsic Model WW-400 diphrgm ctuted hydruliclly operted vlve is t the leding edge of control vlve design. It combines simple nd relible construction with superior performnce,
More information2 Way Slip-In Cartridge Valves Series CE, CP, C
tlogue H-3500/UK hrcteristics Wy Slip-In rtridge lves Series E,, wy slip-in crtridge vlves re hydruliclly controlled set vlves tht re designed for compct block instlltion. Slip-in crtridge, cover, nd pilot
More informationV5013B,C,F Three-Way Mixing and Diverting Valves
V50,C,F Three-Way Mixing and Diverting Valves FETURES PRODUCT DT Mixing or diverting models. ronze body with threaded connections or cast iron body with flanged-end connections. Stainless steel stem and
More informationSMP-BC Mixproof Valve
. kythe Proven Mixproof Rnge SMP-BC Mixproof Vlve Concept SMP-BC is snitry pneumtic set vlve, designed for sfety nd lek detection when two different products flow through only one vlve. The vlve is often
More informationTwo-Position Electric Duplex Room Thermostats
TC-xx Series, TC-xx Series, TF- Series Two-Position Electric Duplex Room Thermostts These thermostts provide on-off control of heting/cooling systems. Fetures: Seprte units for C nd F. All units except
More informationLincoln Under-cabinet Light Installation Instructions
Lincoln Under-cbinet Light Instlltion Instructions #1500178 Rev A Congrtultions on your new Lincoln Under-cbinet Light! Whether purchsed for its significnt energy svings nd efficiency, lower lifetime costs,
More informationSelection Guide. Vx-7000 & Vx-9000 Series Mx4x-6xxx & Mx4x-7xxx Series. Globe Valve Assemblies. Actuator/Linkage Assemblies
Vx-7000 & Vx-9000 Series Mxx-6xxx & Mxx-7xxx Series Selection Guide Linked Globe Valve ssemblies ctuator/linkage ssemblies with DuraDrive ctuators Globe Valve ssemblies The V, VF, and VS-7000 and -9000
More informationBrazed heat exchanger XB
Description The XB is rnge of copper rzed plte het exchngers for use in District Heting (DH) nd District Cooling (DC) pplictions, e.g. domestic hot wter production, district heting susttion to seprte the
More informationSolenoid Operated Proportional Directional Control Valve (with Pressure Compensation, Multiple Valve Series)
Solenoid Operted Proportionl Directionl Control Vlve (with Pressure Compenstion, Multiple Vlve Series) Hydrulic circuit (Exmple) v Fetures hese stcking type control vlves show pressure compensted type
More informationVALVULAS. Modelo 215V, 337 Sección VIII, Vacío De Asme Aire/Gas, Válvulas De Seguridad Certificadas Tarjeta Nacional ' UV'
VLVULS Modelo 215V, 337 Sección VIII, Vacío De sme ire/gas, Válvulas De Seguridad Certificadas Tarjeta Nacional ' UV' Descripciones Modelo Model 337: Tiene dispositivo para la elevación 'tirar-anillo'
More informationErie VT/VS PopTop Series Two Position Spring Return Valves
Erie VT/VS PopTop Series Two Position Spring Return Valves General & High Close-Off PopTop Zone Valves General Instructions pplication Erie PopTop Series valve bodies and actuators provide easy installation
More informationSolenoid Pilot Operated Directional Control Valve
Contct Detils efore using the product, plese check the guide pges t the front of this ctlog. http://www.dikinpmc.com/en/ For ltest informtion, PDF ctlogs nd opertion mnuls Solenoid Pilot Operted Directionl
More informationUBAN Series. Direct operated pressure reducing valve. Suitable for: Air & process gases. Liquids. Steam. Markets: Oil & gas. Blanketing systems
UBAN Series Direct operted pressure reducing vlve Suitble for: Air & process gses Liquids Stem Mrkets: Oil & gs Blnketing systems Generl industry Power CC0032E - Rev. 1 14/01/2010 UB REGULATORS UBAN Series:
More informationModel B. Thermostatic Valves FEATURES APPLICATIONS FLOW RATES OF USGPM TAMPER-PROOF TEMPERATURE SETTINGS OF 55 F F
Model Thermostatic Valves FETURES FLOW RTES OF 68-1200 USGPM TMPER-PROOF TEMPERTURE SETTINGS OF 55 F - 240 F OMPLETELY SELF-ONTINED POSITIVE 3-WY VLVE TION VILLE IN ST IRON, DUTILE IRON, RONZE, STEEL,
More informationProportional directional valves
/4 Proportionl directionl vlves 6.9 Type 4WRE nd 4WREE NG 6 nd p to r p to 8 L/min Contents Function nd configurtion Symols Ordering code Technicl dt 4 Electricl connections, plug-in connectors Integrted
More information3-Way Zone Valves, Brass Threaded (1/2 to 1 in.), Sweat (1/2 to 1-1/4 in.) with Electric Actuators
1 Part Numbering System Two Position, ctuator Zone Valve 3-way zone valves V X 3 X X X X 1 X X XX X 2 Body Type & Temperature T = On/Off (General) S = On/Off (Steam) High temperature actuator must be used.
More informationTransmission and Driveline. Section 2A - Transmission and Driveline
Trnsmission nd Driveline Trnsmission nd Driveline Tle of Contents Section 2A - Trnsmission nd Driveline 2 A Generl Informtion...2A-2 Ger Rtio Selection...2A-2 Engine nd Propeller Shft Instlltion Angle...2A-2
More information2/2 4/4 Solenoid Directional Seat Valve, ISO Size 03
2/2 4/4 Solenoid Directionl Set Vlve, ISO Size 03 Q mx = 20 l/min, p mx = 315 r idirectionl set-vlve shut-off, direct cting, electriclly operted 1 Description he W2N / W2 series of 2/2 4/4 solenoid operted
More information3-Way Mixing and Sequencing Globe Valves, Flared (5/8 in. O.D.) with Electric, Hydraulic, and Pneumatic Actuators
lectric, Hydraulic, and Pneumatic ctuators TL 1. Select Valve ody including P ode (Valve Size, v Rating, Port ode) or select Valve ssemly correct (refer to Tale 3 and Tale 3 also) less ctuator ode (XXX)
More informationSolenoid Pilot Operated Directional Control Valve
efore using the product, plese check the guide pges t the front of this ctlog. http://www.dikinpmc.com/en/ Solenoid Pilot Operted Directionl Control Vlve Fetures hese models relize high-pressure lrge-flow-rte
More informationTFM 1600 Seat Body Material: Stainless. PTFE Seat Body Material: Stainless and Brass. Catalog No. V81-5 May 2008
Ctlog No. V815 My 2008 Vlve with lever hndle Working pressure sets: 68.9 br (1000 psig) TFM sets: 137 br (2000 psig) Vlve with butterfly hndle Working pressure sets: 68.9 br (1000 psig) TFM sets not pplicble
More informationDIEBOLD 3750 CASH RECYCLER TERMINAL. 13mm ( 2") UL SAFE - 15" OR 19" DISPLAY THROUGH THE WALL 330mm (13") PLAN VIEW FRONT ELEVATION SECTION
L8 CLL -800--600 R DIEBOLD 0 CSH RECYCLER TERMINL mm ( ") UL SFE - " OR " DISPLY THROUGH THE WLL 0mm (") 64 SFE ( 6 ") CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE
More informationHOOK UP LAYOUT FOR HEAT GENERATION AND FUEL TANK SYSTEM
HOOK UP LYOUT FOR HET GENERTION ND FUEL TNK SYSTEM DESRIPTION IRNIN PETROLEUM STNDRDS NO REVISION PERMITTED UNLESS PPROVED Y STNDRD ORGNIZTION OVER SHEET DRWING No. IPS-D-R-018 SHT 1 "(DN0) FILL FUEL OIL
More information330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT. 330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT TYPICAL ACCESS TO LEVELING 15
L CLL -800--600 R DIEBOLD 0 CSH DISPENSER THROUGH 0mm (") MXIMUM WLL 0mm ( 6" ) CEN I, CEN III GS, or CEN IV GS SFES CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE
More informationCS 7780 FULL FUNCTION DRIVE-UP TERMINAL
L CLL -800--600 CS 80 FULL FUNCTION DRIVE-UP TERMINL mm ( ") UL - "or " DISPLY THROUGH 0mm (8") MXIMUM WLL CONSULT WITH DIEBOLD NIXDORF INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE
More informationElectrically controlled directional control poppet valve type UREZ6
LICION Electriclly controlled directionl control poppet vlve type UREZ6 is intended for chnging the direction of hydrulic fluid flow in system, which llows for chnge of the direction of the receiver motion
More informationDirectional Control Valves. General Description. Features. Specifications
echnicl Informtion Generl Description directionl control vlves re high performnce, 5-chmer, direct operted, wet rmture, solenoid controlled, 3 or 4-wy vlves. hey re ville in 2 or 3-position nd conform
More informationApplication Examples of Air-piloted Valves
ir-piloted Vlves Fetures Since the unit requires ir piping only, with no need for electricl wiring, it cn e hndled y person without fer of electricl shocks or current lekge. Using no electricity mens tht
More informationPOWER BUTTON: 25mm (1") CONDUIT X 3048mm (10'-0") LONG TO HOUSE POWER AND CONTROL CABLES (SUPPLIED BY DIEBOLD)
R Easy-aire GX PNEUMTIC DELIVERY SYSTEM 24mm(") DI. PNEUMTIC TUBE SYSTEM 86G OPERTOR ND 8G CUSTOMER DETILS L962 CLL -8-999-6 OPERTOR CONTROL PNEL PROJECTION FILE NO. 8-26 REV. SUBJECT TO CHNGE W ITHOUT
More informationBoiler room components 0861EN April 2017 Distribution and regulation units
oiler room components 8EN pril Distriution nd regultion units R8R R8RY R8RY R8RY R8RY Unit with insultion nd ctutor (optionl) R8RY R8RY R8RY R8RY Description R8R distriution units control heting nd cooling
More informationDIESEL EGT GAUGE INSTALLATION INSTRUCTIONS P14D AA
DIESEL EGT GUGE INSTLLTION INSTRUCTIONS P4D4-9235- Revision: - Dated 3/9/4 Replaces: None DIESEL EGT GUGE INSTLLTION HRDWRE CONTENTS P4D4-44- - DIESEL EGT GUGE KIT COMPONENT - DIESEL EGT GUGE SSY (PRT
More informationSpark Plug Fouling 3.0 Liter OptiMax
WARRANTY INFORMATION PARTS INFORMATION SERVICE INFORMATION Bulletin No. 2002-07 Circulte to: Sles Mnger Accounting Service Mnger Technicin Prts Mnger Sprk Plug Fouling 3.0 Liter OptiMx Models Affected
More informationSolenoid Pilot Operated Directional Control Valve
Contct Detils efore using the product, plese check the guide pges t the front of this ctlog. http://www.dikinpmc.com/en/ For ltest informtion, DF ctlogs nd opertion mnuls Solenoid ilot Operted Directionl
More information* * * DIEBOLD 3700 LOBBY CASH RECYCLER- FRONT LOAD 15" DISPLAY OR 19" DISPLAY CONSUMER ACCESS DIMENSIONS PLAN VIEW 19" DISPLAY FRONT ELEVATION
R L CLL -0--600 64 SFE ( 6 ") DIEBOLD 00 LOBBY CSH RECYCLER- FRONT LOD " DISPLY OR " DISPLY WITH mm ( ") UL SFE CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE
More informationDIEBOLD 5550 CASH DISPENSER THROUGH 330mm (13") MAXIMUM WALL PLAN VIEW FRONT ELEVATION SIDE ELEVATION CONSUMER ACCESS DIMENSIONS
L0 CLL -800--600 R DIEBOLD 0 CSH DISPENSER THROUGH 0mm (") MXIMUM WLL mm ( " ) UL CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE PLNNING ND SITE PREPRTION GUIDE
More informationRPEA3-06. Functional Description HA /2011. Directional Control Valves Solenoid Operated with 8W Coil. Replaces HA /2007
Directionl Control Vlves Solenoid Operted with 8W Coil RPEA3-06 0/20 Size 06 (D 03) 350 br (5076 PSI) 80 L/min (2 GPM) Replces 2/2007 /3-, /2- wy directionl control vlves Enclosure type to IP65 Push button
More informationAppendix E Head and Valve Assembly Details All D-Style Models 351
Appendix E Hed nd Vlve Assemly Detils All D-Style Models FD Hed Vlve Holddown Assemlies Suction (spec P) 0 0 Suction (spec P) 0 0 Dischrge (ll specs) 0 WFD Hed Appendix E Hed nd Vlve Assemly Detils All
More informationHand-operated Actuator Type 3273
Hnd-operted Actutor Type 3273 Appliction Hnd-operted ctutor for ttchment to vlves, especilly for Series 240, 250 nd 260 Control Vlves. Rted trvels of 5 nd 30 mm. Nominl thrusts up to 32 kn The Type 3273
More informationSolenoid Pilot Operated Directional Control Valve
Contct Detils efore using the product, plese check the http://www.dikinpmc.com/en/ For ltest informtion, DF ctlogs nd opertion mnuls Solenoid ilot Operted Directionl Control Vlve Fetures hese models relize
More informationDIEBOLD IN LOBBY TELLER (ILT) PORTRAIT OR LANDSCAPE INSTALLED WITH A COIN RECYCLER SIDE CAR PLAN FRONT VIEW SIDE VIEW PAGE 1 OF 7
L2 CLL -800--600 TP-826-00. R CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE PLNNING ND SITE PREPRTION GUIDE DIEBOLD 00 - IN LOBBY TELLER (ILT) PORTRIT OR LNDSCPE
More information2/2 Solenoid Operated Seat Valve, ISO Size 03
2/2 Solenoid Operted Set Vlve, ISO Size 03 Q mx = 40 l/min (11 gpm), p mx = 315 r (4500 psi) Sndwich design, idirectionl lek-proof shutoff, direct cting, electriclly operted 1 Description 2 echnicl dt
More informationBlocked for new applications / Für Neuanwendung gesperrt
locked for new pplictions / Für Neunwendung gesperrt RE 29 075/05.02 Replces: 02.0 roportionl directionl vlve, pilot operted with electricl position feedbck ype 4WRKE Nominl sizes 0 to 35 Series 3 Mximum
More informationVBGx-xx-xx Externally Threaded Control Ball Valves PN25 (DN40 TO DN50)
VGx-xx-xx Externally Threaded Control all Valves PN25 ( TO DN50) PPLICTION The VG2 2-Way and VG3 3-Way Control all Valves control hot and chilled water with glycol solutions up to 50% according to VDI2035
More informationVB-9313 Series. Application. Features. Applicable Literature
V-9313 Series 2-1/2" and 3" Screwed NPT 2-1/2" to 6" 125 Lb. Flanged Three-Way Mixing s General Instructions pplication V-9313 series three-way mixing valves control hot or chilled water in heating or
More informationCC-410 KIT SERIES INSTRUCTION SHEET
(COMPLETE CC-410-W KIT ILLUSTRTED. CUT-OUTS IN TRCK & FSCI TO EXPOSE COMPONENTS) CC-410 KIT SERIES INSTRUCTION SHEET CROWDERTRCK S CTCH N CLOSE TM SYSTEM PREVENTS BOUNCING ND SLMG OF SLIDING DOORS. CN
More information2-Way Zone Valves, Brass Threaded, Sweat, Flare, Inverted Flare (1/2 to 1-1/4 in.) with Electric Actuators
1 Part Numbering System Two Position, ctuator Zone Valve V X X X X X X X X X XX X 2 y s, s ade t,, Body Type & Temperature T = On/Off (General) S = On/Off (Steam) High temperature actuator must be used.
More informationElectronic Globe Valve Guide Specifications
Electronic Globe Valve Guide Specifications Two and Three-Way Screwed Valves Valves 1/2" through 2" shall be bronze body, NPT screw type, and shall be rated for NSI Class 250 working pressure. The operating
More informationSection 6. Transformers. Table of Contents. General Purpose, Dry Type, 600 Volts and Below. Industrial Control. Instrument, 600 Volt Class
Tble of ontents Section Trnsformers Generl Purpose, Dry Type, 00 Volts nd elow Three-Phse, Energy Efficient Trnsformers -2 Single-Phse, Energy Efficient Trnsformers -2 K-Rted Trnsformers -3 Drive Isoltion
More informationSpecifications/Instructions AB-7353-U. General. Features
Specifictions/Instructions ACTIVAL Motorized Two-Wy Vlve with Flnged-End Connection for High Differentil Pressure Appliction (ANSI Clss125 equivlent /
More informationJUMO MIDAS S05 OEM pressure transmitter - universal
Delivery ddress: Mckenrodtstrße 4 609 Fuld, Germny Postl ddress: 605 Fuld, Germny Phone: +49 66 600-0 Fx: +49 66 600-607 Hrlow, Essex CM0 DY, UK Phone: +44 79 655 Fx: +44 79 656 Cnstot, NY 0, USA Phone:
More informationElectrically operated directional spool valve with a soft-shift function type WE10P NS 10. up to 35 MPa up to 120 DATA SHEET - OPERATION MANUAL
LICTION Electriclly operted directionl spool vlve with soft-shift function type WE10 NS 10 Electriclly operted directionl spool vlve type WE10 is intended for chnging the direction of fluid flow in hydrulic
More informationELECTRIC ACTUATORS 400 N
ELECTRIC CTUTORS 400 N SE4 PPLICTION Electric actuator SE4 is suitable to drive valve body series in HVC systems. Two action types are available: - floating (3-point) - modulating Vdc and m. ctuator is
More informationPOWERHEAD. Section 4A - Cylinder Head. Rocker Shaft and Rocker Arm... 4A-21 Camshaft... 4A-22 Cylinder Head... 4A-24
POWERHEAD Section 4A - Cylinder Hed CYLINDER HEAD Tle of Contents Specifictions........................... 4A-2 Specil Tools........................... 4A-4 Cylinder Hed.......................... 4A-6
More informationCOIN DISPENSER SIDE CAR FOR INSTALLATION NEXT TO DIEBOLD IN LOBBY TELLER (ILT) PLAN FRONT VIEW SIDE VIEW PAGE 1 OF 7 CALL
SIDE CR FOR INSTLLTION NEXT TO DIEBOLD 00 - IN LOBBY TELLER (ILT) L2 CLL -800--600 CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE PLNNING ND SITE PREPRTION GUIDE
More informationAppendix E D791 and T791 Head and Valve Holddown Assembly Details
Appendix E D nd T Hed nd Vlve Holddown Assemly Detils Hed First Stge Holddown Assemly (") Suction with Unloder Suction (Stndrd) First Stge Holddown Assemly (") Dischrge See figure A 0 CAUTION: Alwys relieve
More information3700 LOBBY CASH RECYCLER. REAR LOAD 13mm ( 2") UL SAFE - 15" DISPLAY OR 19" DISPLAY WITH DETAILS FOR OPTIONAL VESTIBULE INSTALLATION
R L CLL -0--600 64 SFE ( 6 ") DIEBOLD 00 LOBBY CSH RECYCLER RER LOD mm ( ") UL SFE - " DISPLY OR " DISPLY WITH DETILS FOR OPTIONL VESTIBULE INSTLLTION CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR
More informationSpecial Valves. Connection size G1/8 to G2. Contents Version Actuation Port size Page Characteristics. Instructions Overview. Electrical G1/8 G1/4
Contents Version Actution Port size Pge Chrcteristics Dimensions 3/2, 5/2 nd 5/3 Wy Vlves with NAMURconnections Series S9 5/2 Wy Vlves for Two Hnd Opertion Series S9 Time Dely Vlve for 2-Hnd Sfety Strt
More informationROTARY MOTORIZED VALVES
ROTRY MOTORIZED VLVES ESE ROTRY VLVES regulate the heating comfort of millions of households. When we decided to develop the next generation of valves and actuators, we started by asking installation engineers,
More informationADCATROL INTERMITTENT BLOWDOWN VALVES VPA 26 (Fabricated steel)
TROL INTERMITTENT BLOWDOWN VLVES VP 26 (Fabricated steel) DESCRIPTION The VP26 blowdown valve was specially designed for application on steam boilers removing the concentrations of solids avoiding boiler
More informationCS 7750 FULL FUNCTION TERMINAL 15" OR 19" DISPLAY - THROUGH THE WALL 330mm (13")
L08 CLL -800--600 " OR " DISPLY - THROUGH THE WLL 0mm (") 40mm ( 6") CEN I CONSULT WITH DIEBOLD NIXDORF INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE PLNNING ND SITE PREPRTION GUIDE
More information4/3, 4/2 and 3/2 explosion-proof solenoid directional valve
01/06 4/3, 4/2 nd 3/2 explosion-proof solenoid directionl vlve Type G...WE6...L6X 2.21 Size (NG) 6 Up to 350 br Up to 80 L/min Contents Function nd configurtion Specifictions 03 Spool symbols 03 Technicl
More information9900 IN LOBBY TELLER - (ILT) PORTRAIT AND LANDSCAPE DISPLAY PLAN FRONT VIEW SIDE VIEW PAGE 1 OF 6 CALL
00 IN LOBBY TELLER - (ILT) PORTRIT ND L CLL -800--600 40mm ( 6") CEN I / CEN III GS / CEN IV GS SFES CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE PLNNING ND
More informationSEE PAGES 3 AND 4 OF 7 FOR 3700 CASH RECYCLER THROUGH THE WALL WITH VESTIBULE TRIM KIT REFERENCE FRONT EDGE OF BEZEL FOR DEPTH DIMENSIONS
R DIEBOLD 00 LOBBY CSH RECYCLER- RER LOD L2 CLL -0--600 64 SFE (2 6 ") 40mm ( 6") CEN I SFE - " DISPLY OR " DISPLY WITH DETILS FOR OPTIONL VESTIBULE INSTLLTION CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH
More information2/2 4/4 Solenoid Directional Seat Valve, ISO Size 03
2/2 4/4 Solenoid Directionl Set Vlve, ISO Size 03 Q mx = 40 l/min (11 gpm), p mx = 315 r (4500 psi) idirectionl lek-proof shutoff, direct cting, electriclly operted Series W2N, W2 1 Description With crtridge
More information4%$ %%X 0RODUCT!PPLICATION 4HE "OTH 4%$ FOR 4%$ 80 DUSTTIGHT 2ATINGS
5-4.1 Termintor TM ZT EEx ed Pipewll Sensing Thermostts Product Specifictions Appliction... Electric Het Trcing ontrol The ZT-WP nd ZT-XP re designed for use s djustble control thermostts for freeze protection
More informationOPTIONAL 178mm (7") SPACER AVAILABLE FOR WALL THICKNESSES UP TO 152mm (6") 330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT
L88 CLL -0--600 R DIEBOLD 0 CSH RECYCLER WITH COIN 40mm ( 6") CEN I, CEN III GS or CEN IV GS SFES THROUGH 0mm (") MXIMUM WLL 64 SFE CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND
More information4/3-4/2 Directional valve elements L8_81 (ED4-P1) with or without LS connections. RE Edition: Replaces:
4/ - 4/ Directionl vlve elements L8_81 with proportionl (ED4-1) control nd with or without LS connections L8_81 (ED4-1) RE 181-1 Edition: 9.18 Replces: 7.1.17 Size Series Mximum operting pressure r (4
More informationGVI Series Industrial Globe Valves for Flow Control
Series Industrial Globe Valves for Flow Control 2-way Flow Control Globe Valves ssured utomations Series Industrial Globe Valves are contructed with rugged carbon steel or stainless steel bodies. They
More information2-Way and 3-Way Globe Valve Assemblies. Two-Way Pneumatic Spring Return Models
2-Way and 3-Way lobe Valve ssemblies Note: hoose a valve assembly with a maximum operating differential pressure apability suffiient for the appliation. onsult Table-1 on page 5 for lose-off pressure ratings.
More informationSTANDARD AND FULL HEIGHT - REAR LOAD - WITH 40mm (1 16") CEN I, CEN III GAS or CEN IV GAS SAFES
L STNDRD ND FULL HEIGHT - RER LOD - WITH 0mm ( 6") "LL DIMENSIONS ND DESIGN CRITERI PGE OF 8 FRONT - STNDRD HEIGHT SEE PGES and FOR CS 00 STNDRD HEIGHT DETILS FRONT - FULL HEIGHT SEE PGES and FOR CS 00
More informationVA, VF, and VS Series Direct Mounted Globe Valve Assemblies. Application. Features
TAC 1354 Clifford Avenue P.O. Box 2940 Loves Park, Illinois 61132-2940 www.invensysibs.com Two-Way and Three-Way Globe Valve Assemblies with 220 lbf Linear (979 N) Spring Return DuraDrive Actuators Submittal
More informationCONTROL VALVES W910 Series
ONTROL ompact ontrol Valve Watson McDaniel reserves the right to change the designs and/or materials of its products without notice. 2010 Watson McDaniel ompany Models W910, W910, W910, W910T, W910EP,
More informationFUEL SYSTEM. Table of Contents. Specifications. Section 3A Electric Fuel Pump FUEL SYSTEM. Fuel Recommended Gasoline Recommended Oil
FUEL SYSTEM Section 3A Electric Fuel Pump Tble of Contents Specifictions........................... 3A-1 Fuel Pump Assembly.................... 3A-2 Specil Tools........................... 3A-3 Fuel Lift
More information200 DGR SALIENT FEATURES !!!
DIAPHRAGM INSTRUMENTS Hirlekr Precision mnufctures qulity ifferentil pressure instruments esigne to mesure the ifference in pressure etween two points in system n show it on single il instrument. A mgnetic
More informationDecor Radiators Baseboard
Decor Rditors Bsebord Pedestl 11 (with fins) Avilble in outputs from 1,561 to 10,282 Btu/hr; 2, nd 4 tubes high. 28 (igh Output, with fins) Avilble in outputs from 5,05 to 19,552 Btu/hr; 2 nd 4 tubes high.
More informationPERSEUS ULTRA LOW PRESSURE
PERSEUS ULTRA LOW PRESSURE PF60 ATEX & IECEx Exd, Exi & INDUSTRIAL ULTRA LOW PRESSURE SWITCH This rnge of switches fetures robust high qulity housing with 1 or 2 seled SPDT microswitches nd hs been designed
More information4/2- and 4/3-directional spool valve solenoid-operated, direct-acting 4WE 6
4/2- nd 4/3-directionl spool vlve solenoid-operted, direct-cting 4WE 6 DESCRIION HYDC 4/2- nd 4/3- directionl spool vlves of the 4WE 6 series re directionl vlves for oil hydrulic systems which re used
More informationRoller and ball bars for easy and safe die change
Roller nd bll brs for esy nd sfe die chnge T-slot tolernces cc. to DIN 6 b c h n min. mx. mx. 8 H8 + +,6 H8 37 +3 +,6 8 H8 +4 0 + 48 56,6 H8 56 +4 5 +3 6 7,5 Dimensions in mm h min. = smllest dimension
More informationBIMETAL-POINTER-THERMOMETER
BIMETA-POINTER-THERMOMETER Chemicl version cc. EN 30 byonet cse IP 6 With or without filling Suitble for chemicl nd petrochemicl industry, food, pulp nd pper industry nd for mchine nd pprtus contruction.
More information152mm (6") DIA. POINT TO POINT SYSTEM PVC OR STEEL TUBE SYSTEM TYPE I AND TYPE II OVERHEAD UNITS TYPE I OVERHEAD UNIT TYPE II OVERHEAD UNIT NOTES:
2mm ") DI. POINT TO POINT SYSTEM PVC OR STEEL SYSTEM L84 CLL -800--600 TYPE I ND TYPE II OVERHED UNITS 4 6 ") ( 8 ") 6 8 ") ( -0 PLN VIEW 20 (8 28 8 ") ( 8 ") 4 ( -4") 2 (4 ( 8 ") 28 ( 8 ") THE TYPE I
More informationDIEBOLD 3700 LOBBY CASH RECYCLER- FRONT LOAD 15" DISPLAY OR 19" DISPLAY CEN I, CEN III GAS, CEN IV GAS or CEN IV GAS EX SAFES
R L CLL -0--600 64 SFE ( 6 ") DIEBOLD 00 LOBBY CSH RECYCLER- FRONT LOD " DISPLY OR " DISPLY CEN I, CEN III GS, CEN IV GS or CEN IV GS EX SFES CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL
More informationD I S T R I B U T E D V A L V E S. NAVCO Series E Resilient Seat Butterfly Valve NAVCO
NVCO Series E Resilient Seat utterfly Valve NVCO SERIES E RESILIENT SET UTTERFLY VLVE Features vailable in sizes 2 in. - 24 in. (50 mm - 600 mm) 200 psi 2 in. - 12 in. (50 mm - 300 mm) 150 psi 14 in. -
More informationSELECTION. Easily Selectable Easily Serviceable. Interchangeability as easy as 1-2-3
SELETION Terminal Unit Zone Valve 1 Select your valve body Female Thread Solder ouble Union 2 Select your cartridge type hoice of V Hot and hilled Water 50% Glycol Low Pressure Steam Pressure alanced Male
More informationFUEL SYSTEM. Section 3A Pulse Crankcase Driven Fuel Pump. Model 200/225 DFI. 1. Fuel Pressure/Vacuum Gauge (0-15 psi) (Obtain Locally)
FUEL SYSTEM Section 3A Pulse Crnkcse Driven Fuel Pump Tle of Contents Specifictions................................ 3A-1 Specil Tools................................ 3A-1 Fuel Pump..................................
More information330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT. 330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT (2) EACH SIDE OF SAFE CEN I SAFE ONLY
L08 CLL -800--600 R CS 0 FULL FUNCTION TERMINL " OR " DISPLY - THROUGH THE WLL 0mm (") 40mm ( 6") CEN I, CEN III GS OR CEN IV GS SFES SFE CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS
More information203mm (8") MAXIMUM WALL THICKNESS IN AREA OF UNIT NOTE: 203mm (8") MAXIMUM WALL THICKNESS IN AREA OF UNIT (2) EACH SIDE OF SAFE CEN I SAFE ONLY
L0 CLL -800--600 R CS 0 FULL FUNCTION VESTIBULE TERMINL " OR " DISPLY-THROUGH 0mm ( MXIMUM WLL 40mm ( 6") CEN I, CEN III GS or CEN IV GS SFES SFE ( 6 ") CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR
More information