Pipe Fittings. HP Series
|
|
|
- James Carson
- 6 years ago
- Views:
Transcription
1 Pipe Fittings HP Series
2 Contents Pipe Plug Hollow Hex Plug Close Nipple Special Pipe Nipple Hex Nipple Hex Long Nipple Reducing ushing Pipe Cap Hex Coupling Union all Joints Adaper Male lbow Street lbow Female lbow Male Tee Male Street Tee Male ranch Tee Female Tee Female Cross
3 Features very fitting is marked with type and size, as well as the manufacturer All fittings are cleaned to remove oil, grease, and loose particles Straight fittings are manufactured from quality bar stock for strength, shaped fittings are manufactured from forgings Technical Data Material Standards Material 36SS rass Carbon steel Designator SS CS ar Stock ASM SA479, ASTM A276 ASM 6, ASTM 453 ASTM A08 Forgings ASM SA82, ASTM A82 ASTM 283 ASTM A576 To resist corrosion, all carbon steel fittings are treated with an electrodeposited zinc plating Thread Specifications Thread Type Specification NPT ASM.20., SA AS705 SP(Tapered) IS0 7/, S 2, JIS 0203 SP(Parallel) IS0 228, JIS 0202 Unified(SA) ASM. Metric(M) ISO 26, G/ T96 Pressure Ratings asis Ratings are based on ASM/ANSI 3.3. Material 36SS rass Carbon steel Allowable Stress Value 20000psig(378bar) 0000psig(689bar) 20000psig(378bar) Thread Pressure Ratings Pipe nd(npt and ISO 7) Pressure Ratings NPT/ISO Pipe /6 2 36SS and Carbon Steel Male Female psig bar psig bar rass Male Female psig bar psig bar Note: Calculations based on ASM 3.3 for process piping
4 SA/MS Pressure Ratings SA/MS Thread 5/6-24 7/ / /8-4 /6-2 3/6-2 5/6-2 5/8-2 7/ SS and Carbon Steel Nonpositionable Positionable psig bar psig bar Note: Pressure ratings are from SA J926/3 Temperature Ratings System temperatures may be limited by the thread sealant,gasket or O-ring material Fitting Materials Material 36SS rass Carbon steel Temperature -325 o F(-200 o C) Temperature 200 o F(649 o C) 400 o F(204 o C) 375 o F(90 o C) Remark: (For stainless steel) Prolonged exposure to temperature over 800 o F(426 o C) is not recommended Gasket, O-ring Materials Component Material Temperature Temperature RS gasket una-n Fluorocabon FKM -3 o F(-25 o C) 5 o F(-5 o C) 230 o F(0 o C) 400 o F(204 o C) RG, RP gasket Copper -325 o F(-98 o C) 800 o F(426 o C) O-rings Viton una-n - 40 o F(-40 o C) -3 o F(-25 o C) 450 o F(232 o C) 230 o F(0 o C) Information Add a material designator to the basic ordering number, to get the complete ordering number xample: Reducing bushing with " male NPT thread, " female NPT thread and 36 stainless steel the complete ordering number is SS-PR-NS8-NS4 Note: Dimensions in mm unless otherwise specified. Dimensions for reference only, subject to change 2
5 3 Pipe Plug /6 -PP-NS -PP-NS2 -PP-NS4 -PP-NS6 -PP-NS8 -PP-NS2 -PP-NS /6 -P -P2 -P4 -P6 -P8 -P2 -P PP-RS2 -PP-RS4 -PP-RS6 -PP-RS8 -PP-RS2 -PP-RS P-RS D 7/6-20 9/ /6-2 5/6-2 -PP-ST7 -PP-ST9 -PP-ST2 -PP-ST7 -PP-ST P-SA/MS
6 Hollow Hex Plug D /6 -PI-NS -PI-NS2 -PI-NS4 -PI-NS6 -PI-NS8 -PI-NS D /6 -PI-RT -PI-RT2 -PI-RT4 -PI-RT6 -PI-RT8 -PI-RT
7 Close Nipple 5 /6 -PCN-NS -PCN-NS2 -PCN-NS4 -PCN-NS6 -PCN-NS8 -PCN-NS2 -PCN-NS Number L D /6 -PCN-RT -PCN-RT2 -PCN-RT4 -PCN-RT6 -PCN-RT8 -PCN-RT2 -PCN-RT Number L D PSN-NS PSN-NS2- -PSN-NS PSN-NS2- -PSN-NS PSN-NS4- -PSN-NS PSN-NS4- -PSN-NS PSN-NS PSN-NS6- -PSN-NS PSN-NS6- -PSN-NS PSN-NS8- -PSN-NS8- -PSN-NS PSN-NS PSN-NS2- -PSN-NS2- -PSN-NS PSN-NS6- -PSN-NS Number L D Special Pipe Nipple
8 Hex Nipple /6 -PHN-NS -PHN-NS2-NS -PHN-NS2 -PHN-NS4-NS -PHN-NS4-NS2 -PHN-NS4 -PHN-NS6-NS -PHN-NS6-NS2 -PHN-NS6-NS4 -PHN-NS6 -PHN-NS8-NS2 -PHN-NS8-NS4 -PHN-NS8-NS6 -PHN-NS8 -PHN-NS2-NS2 -PHN-NS2-NS4 -PHN-NS2-NS6 -PHN-NS2-NS8 -PHN-NS2 -PHN-NS6-NS2 -PHN-NS6-NS4 -PHN-NS6-NS6 -PHN-NS6-NS8 -PHN-NS6-NS2 -PHN-NS6 -PHN-NS20-NS6 -PHN-NS20 -PHN-NS /6 /6 /6 / PHN-RT2 -PHN-RT4 -PHN-RT6 -PHN-RT8 -PHN-RT2 -PHN-RT PHN-NS2-RT2 -PHN-NS4-RT4 -PHN-NS6-RT6 -PHN-NS8-RT8 -PHN-NS2-RT2 -PHN-NS6-RT Px-RT 6 Px-NPT Px-RT
9 7 Hex Nipple -PHN-NS2-RS2 -PHN-NS4-RS4 -PHN-NS6-RS6 -PHN-NS8-RS8 -PHN-NS2-RS2 -PHN-NS6-RS Px-RS D -PHN-NS4-ST7 -PHN-NS6-ST9 -PHN-NS8-ST2 -PHN-NS2-ST7 -PHN-NS6-ST /6-20 9/ /6-2 5/6-2 Px-SA/MS PHN-NS4-MS8 -PHN-NS4-MS4 -PHN-NS6-MS4 -PHN-NS8-MS4 -PHN-NS4-MS4 -PHN-NS2-MS20 -PHN-NS4-MS20 -PHN-NS6-MS20 -PHN-NS8-MS20 -PHN-NS2-MS20 -PHN-NS6-MS24 -PHN-NS8-MS M8X M4X.5 M4X.5 M4X.5 M6X.5 M20X.5 M20X.5 M20X.5 M20X.5 M20X.5 M24X.5 M24X.5 Px-Metric PHN-RT4-MS2 -PHN-RT2-MS20 -PHN-RT4-MS20 -PHN-RT6-MS20 -PHN-RT8-MS M2X.5 M20X.5 M20X.5 M20X.5 M20X.5 Px-Metric
10 Hex Nipple 8 -PHN-RS4-MS8 -PHN-RS2-MS20 -PHN-RS4-MS20 -PHN-RS6-MS20 -PHN-RS8-MS P-RS M8X.5 M20X.5 M20X.5 M20X.5 M20X.5 Px-Metric D M20X.5 M20X.5 M20X.5 M20X.5 M20X.5 M27X2 -PHN-MS20-MS0 -PHN-MS20-MS2 -PHN-MS20-MS4 -PHN-MS20-MS6 -PHN-MS20 -PHN-MS M0X M2X.5 M4X.5 M6X.5 M20X.5 M27X Px-Metric P-Metric
11 9 Hex Long Nipple -PLN-NS PLN-NS2- -PLN-NS PLN-NS2- -PLN-NS PLN-NS4- -PLN-NS PLN-NS4- -PLN-NS PLN-NS PLN-NS6- -PLN-NS PLN-NS6- -PLN-NS PLN-NS8- -PLN-NS8- -PLN-NS PLN-NS PLN-NS2- -PLN-NS2- -PLN-NS PLN-NS6- -PLN-NS
12 Reducing ushing 0 -PR-NS2-NS -PR-NS4-NS -PR-NS4-NS2 -PR-NS6-NS -PR-NS6-NS2 -PR-NS6-NS4 -PR-NS8-NS2 -PR-NS8-NS4 -PR-NS8-NS6 -PR-NS2-NS2 -PR-NS2-NS4 -PR-NS2-NS6 -PR-NS2-NS8 -PR-NS6-NS2 -PR-NS6-NS4 -PR-NS6-NS6 -PR-NS6-NS8 -PR-NS6-NS2 -PR-NS20-NS2 -PR-NS20-NS6 -PR-NS24-NS6 -PR-NS24-NS /6 /6 /6 Px-NPT PR-RT4-RT2 -PR-RT6-RT4 -PR-RT8-RT4 -PR-RT8-RT Px-RT 0.4
13 Pipe Cap /6 -PC-NS -PC-NS2 -PC-NS4 -PC-NS6 -PC-NS8 -PC-NS2 -PC-NS /6 -PC-RT -PC-RT2 -PC-RT4 -PC-RT6 -PC-RT8 -PC-RT2 -PC-RT
14 Hex Coupling 2 /6 -PCG-NS -PCG-NS2 -PCG-NS4-NS2 -PCG-NS4 -PCG-NS6-NS4 -PCG-NS6 -PCG-NS8-NS2 -PCG-NS8-NS4 -PCG-NS8-NS6 -PCG-NS8 -PCG-NS2-NS4 -PCG-NS2-NS8 -PCG-NS2 -PCG-NS6-NS8 -PCG-NS6-NS2 -PCG-NS / PCG-RT2 -PCG-RT4 -PCG-RT6-RT4 -PCG-RT6 -PCG-RT8-RT4 -PCG-RT8-RT6 -PCG-RT Px-NPT Px-RT
15 Union all Joints Fx -UJ-NS2 -UJ-NS4 -UJ-NS6 -UJ-NS8 -UJ-NS2 -UJ-NS
16 Adaper 4 -PA-NS2-NS -PA-NS2 -PA-NS4-NS -PA-NS4-NS2 -PA-NS4 -PA-NS6-NS -PA-NS6-NS2 -PA-NS6-NS4 -PA-NS6 -PA-NS8-NS2 -PA-NS8-NS4 -PA-NS8-NS6 -PA-NS8 -PA-NS2-NS2 -PA-NS2-NS4 -PA-NS2-NS6 -PA-NS2-NS8 -PA-NS2 -PA-NS6-NS2 -PA-NS6-NS4 -PA-NS6-NS6 -PA-NS6-NS8 -PA-NS6-NS2 -PA-NS6 -PA-NS20-NS /6 /6 /6 Px-NPT -PA-NS2-RT2 -PA-NS4-RT4 -PA-NS6-RT6 -PA-NS8-RT8 -PA-NS2-RT2 -PA-NS6-RT Px-RT -PA-NS2-RS2 -PA-NS4-RS4 -PA-NS6-RS6 -PA-NS8-RS8 -PA-NS2-RS2 -PA-NS6-RS Px-RS D
17 5 Adaper -PA-RT2 -PA-RT4-RT2 -PA-RT4 -PA-RT6-RT4 -PA-RT6 -PA-RT8-RT4 -PA-RT8-RT6 -PA-RT8 -PA-RT2 -PA-RT Px-RT -PA-RT2-NS2 -PA-RT4-NS4 -PA-RT6-NS6 -PA-RT8-NS8 -PA-RT2-NS2 -PA-RT6-NS Px-NPT -PA-NS4-ST7 -PA-NS6-ST9 -PA-NS8-ST2 -PA-NS2-ST7 -PA-NS6-ST /6-20 9/ /6-2 5/6-2 Px-SA/MS -PA-RG4-NS4 -PA-RG6-NS6 -PA-RG8-NS P-RG Px-NPT
18 Male lbow 6 /6 -PM-NS -PM-NS2 -PM-NS4 -PM-NS6 -PM-NS8 -PM-NS2 -PM-NS Street lbow /6 /6 /6 /6 -PS-NS -PS-NS-NS2 -PS-NS-NS4 -PS-NS-NS6 -PS-NS2-NS -PS-NS2 -PS-NS2-NS4 -PS-NS2-NS6 -PS-NS2-NS8 -PS-NS2-NS2 -PS-NS2-NS6 -PS-NS4-NS2 -PS-NS4 -PS-NS4-NS6 -PS-NS4-NS8 -PS-NS4-NS2 -PS-NS4-NS6 -PS-NS6-NS4 -PS-NS6 -PS-NS6-NS8 -PS-NS6-NS2 -PS-NS6-NS6 -PS-NS8-NS4 -PS-NS8-NS6 -PS-NS8 -PS-NS8-NS2 -PS-NS8-NS6 -PS-NS2 -PS-NS2-NS6 -PS-NS6 -PS-NS Lx /6 /6 Px-NPT
19 Female lbow 7 /6 -P-NS -P-NS2-NS -P-NS2 -P-NS4-NS2 -P-NS4 -P-NS6 -P-NS8 -P-NS2 -P-NS6 -P-NS20 -P-NS /6 / Lx Lx 9.8 Px-NPT Px-RT
20 8 /6 -PMT-NS -PMT-NS2 -PMT-NS4 -PMT-NS6 -PMT-NS8 -PMT-NS2 -PMT-NS6 -PMT-NS20 -PMT-NS Male Tee Male Street Tee /6 -PST-NS -PST-NS2 -PST-NS4 -PST-NS6 -PST-NS8 -PST-NS2 -PST-NS Lx /6 -PT-NS -PT-NS2 -PT-NS4 -PT-NS6 -PT-NS8 -PT-NS2 -PT-NS Lx Male ranch Tee
21 9 Female Tee /6 -PT-NS -PT-NS2 -PT-NS4 -PT-NS6 -PT-NS8 -PT-NS2 -PT-NS6 -PT-NS20 -PT-NS PT-T4 -PT-T6 -PT-T Female Cross /6 -PCR-NS -PCR-NS2 -PCR-NS4 -PCR-NS6 -PCR-NS8 -PCR-NS2 -PCR-NS
Pipe Fittings 1/16 to 1 in. sizes 316 stainless steel, brass, and carbon steel NPT, ISO/BSP, and SAE threads
www.swagelok.com Pipe Fittings 1/16 to 1 sizes 316 stainless steel, brass, and carbon steel, /SP, and S threads 2 Pipe Fittings Contents Nipples Page 4 dapters, Gaskets Page 6 Reducing ushings, Reducers
Pipe Fittings. 1/16 to 1 in. sizes. 316 stainless steel, brass, and carbon steel. NPT, ISO/BSP, and SAE threads.
Pipe Fittings 1 www.swagelok.com Pipe Fittings PIP 1/16 to 1 sizes 316 stainless steel, brass, and carbon steel, /SP, and S threads 2 Weld, VCR, VCO, Pipe, and Vacuum Fittings Contents Nipples Page 4 Crosses
Table Of Contents. Assembly Instructions. Identification of Sync-Lok Tube Fittings. Reducing Port Connector 36. Male Elbow 11
able Of Contents eneral Information 1 Union Cross 27 Ordering Information 3 Reducer 28 ube Selection Data 5 Bulkhead Reducer 29 Male Connector 7 Male Adapter 31 Male Bore hrough Connector 9 emale Adapter
Gaugeable Tube Fittings and Adapter Fittings
www.swagelok.com Gaugeable ittings and dapter ittings vailable in tube sizes from / to 2 in. and 2 to 50 mm Consistent gaugeability upon initial make-up asy to disconnect and retighten Wide variety of
Product warranty. Quality Policy. The Goal
About the Company SEALEXCEL (INDIA) PVT. LTD. is a fast growing manufacturing company in the field of design, development, production and marketing of high quality valves and fittings for international
Gaugeable Tube Fittings and Adapter Fittings
www.swagelok.com Gaugeable Fittings and dapter Fittings vailable in tube sizes from / to 2 and 2 to 50 mm Consistent gaugeability upon initial installation asy to disconnect and retighten Wide variety
Gaugeable Tube Fittings and Adapter Fittings
www.swagelok.com Gaugeable Fittings and dapter Fittings vailable in tube sizes from / to 2 and 2 to 50 mm Consistent gaugeability upon initial installation asy to disconnect and retighten Wide variety
INSTRUMENTATION. Tube Fittings. Catalog Number 01-5 November,
INSTRUMNTATION Tube Fittings Catalog Number 0-5 November, 009 www.dklok.com Index Union U Tube to Tube Union Thermocouple Connector MCT Tube to Female Pipe Female Connector CF-N 9,40 Union lbow Union Tee
Instrument Thread Fittings High Technology Valve & Fitting Series
igh Technology Valve & Fitting Series ow To Order IN - 8 NR - SS IRN - 8-6N - B INSTRUMNT TRD FITTINGS FITTING TYP PIP TRD SIZ PIP TRD TYP MTRI Pressure Ratings Size Designator 2 4 6 8 2 6 20 24 32 Size
Instrumentation Pipe & Weld Fittings. No.03-9 August 2017
Instrumentation ipe & Weld Fittings No.03-9 August 2017 Instrumentation ipe & Weld Fittings Technical Information Thread Fittings Close Nipple GNC 04 ipe lug G 07 Tee GT 10 ex Nipple GN ex Reducing Nipple
VCR. Metal Gasket Face Seal Fittings. 1/16 to 1 in. and 6 to 18 mm sizes. High-purity stainless steels
www.swagelok.com Metal asket ace Seal ittings /6 to and 6 to 8 mm sizes igh-purity stainless steels The original design, the authentic brand 2 Metal asket ace Seal ittings ontents lands Page 4 odies Page
Instrument Thread Fittings. High Technology Valve & Fitting Series
igh Technology Valve & Fitting Series ow To Order IN - 8 NR - SS IRN - 8-6N - B INSTRUMNT TRD FITTINGS FITTING TYP PIP TRD SIZ PIP TRD TYP MTRI Pressure Ratings Size Designator 2 4 6 8 2 6 20 24 32 Size
Gaugeable Tube Fittings and Adapter Fittings
Gaugeable Fittings and dapter Fittings www.swagelok.com Gaugeable Fittings and dapter Fittings TUB vailable in tube sizes from / to 2 and 2 to 50 mm Consistent gaugeability upon initial installation asy
Gaugeable Alloy 400 Mechanically Attached Pipe and Tube Fittings
www.swagelok.com Gaugeable Alloy 400 Mechanically Attached and Fittings For use with MIL-T-16420K 70/30 and 90/10 copper-nickel tubing and pipe Excellent corrosion resistance in chloride-containing environments
An Installer s Pocket Guide for Swagelok Tube Fittings
www.swagelok.com An Installer s Pocket Guide for Swagelok Fittings 2 CONTENTS Intermixing/Interchanging... 8 Metric Swagelok Fittings... 8 Installation Instructions Safety Precautions... 9 Up to /25 mm
Metal Gasket Face Seal Fittings
Metal Gasket ace Seal ittings Series IOK Group IOK GmbH (Headquarter) Sprendlinger andstr. 5, 63069 Offenbach am Main, Germany el.: +49 69 8900 4498 ax: +49 69 8900 4495 IOK, Inc. 3843 North romenade lvd.,
THE PREMIUM QUALITY. Hydraulic Swaging Unit for Pre-Swaging Over 1. Catalog Number 01-5 March, 2009 HYDRAULICSWAGINGUNIT.
TH PRMIUM QUAITY Catalog Number 0-5 March, 009 HYRAUICSWAGINGUNIT.HS-A Hydraulic Swaging Unit for Pre-Swaging Over www.dklok.com Index Union U Tube to Tube Union Thermocouple Connector MCT Tube to Female
THE PREMIUM QUALITY. Catalog Number 01-5 November,
TH PRMIUM QUAITY Catalog Number 0-5 November, 009 www.dklok.com Index Union U Tube to Tube Union Thermocouple Connector MCT Tube to Female Pipe Female Connector CF-N 9,40 Union lbow Union Tee T Union Cross
Pipe Fittings. We deliver confidence through quality products
We deliver confidence through quality products INTRODUCTION I ITTINGS SD's recision pipe fittings are designed and manufactured to very stringent tolerances under rigid quality control procedures, to provide
HIGH PRESSURE FORGED MULTI PURPOSE BALL VALVES. VB6F Series.
HIGH PRESSURE FORGED MULTI PURPOSE BALL VALVES VB6F Series www.unilok.com Features Pressure rating up to 6000psig (413bar) @21 (70 ) with standard PCTFE seats Temperature rating from -54 (-65 ) to 177
Forged High Pressure Pipe Fittings
Forged High Pressure Pipe Fittings Forged High Pressure Pipe Fittings Pressure Class Socket Weld Forged Fittings Products Dimension Specifications Pressure Class Threaded Forged Fittings Products Dimension
INSTRUMENTATION METERING VALVES. VMT Series.
INSTRUMENTATION METERING VALVES VMT Series www.unilok.com Features Pressure rating up to VMTS series - 2000psig (137bar) VMTL & VMTM series - 1000psig (69bar) Temperature rating from -23 C(-10 F) to 204
TUBE FITTINGS INSTRUMENTATION.
TUBE FITTINGS INSTRUMENTATION www.unilok.com We, Uni-Lok corporation, have distinguished ourselves in the design and manufacturing of a high performance Twin Ferrule Compression Fittings and Instrumentation
Instrumentation Thread Fittings
www.superlok.com INDEX ICN 4P IRHB 6P IRSE 8P Close Nipple Reducing Hex Bushing Reducing Street Elbow IHC 6P IME 8P Hex Coupling Male Elbow IHN 4P Hex Nipple IHRC 6P IFT 8P Hex Reducing Coupling Female
TUBE FITTINGS INSTRUMENTATION.
TUBE FITTINGS INSTRUMENTATION www.unilok.com We, Uni-Lok corporation, have distinguished ourselves in the design and manufacturing of a high performance Twin Ferrule Compression and Instrumentation Valves
Pneufit Inch Series Push-In Tube Fittings 1/8" to 1/2" Tube Sizes UNF to 1/2" NPT Thread Options
Section 1 Pneufit Inch Series Push-In Tube Fittings to 1/2" Tube Sizes 10-32 UNF to 1/2" NPT Thread Options Inch Series Product Numbering System..................FIT-1-2 Inch Series Shapes and odes.........................fit-1-3
FITOK Group FITOK GmbH (Headquarter) Sprendlinger Landstr. 115, Offenbach am Main, Germany Tel.: Fax:
FITOK Concised Product Catalog FITOK Group FITOK GmbH (Headquarter) Sprendlinger Landstr. 5, 09 Offenbach am Main, Germany Tel.: +9 9 900 9 Fax: +9 9 900 95 Distributed by: FITOK, Inc. North Promenade
Check valve series. SHCV, SOCV, SOACV, SACV Series. Phone: Fax: Wimbledon Rd.
Check valve series SHCV, SOCV, SOACV, SACV HIGH PRESSURE CHECK VALVES SHCV SERIES Features Pressure rating up to 6,000psig(413bar) at 70 (20 ) Temperature rating up to 375 (190 ) with viton seal standard
Hi-Duty Flareless Tube Fittings
Hi-uty Flareless Tube Fittings dvantages zfc10 No flaring, soldering or other preparation of tubing is necessary. Pre-assembled brass fitting, with sleeve machined onto nut. This two piece flareless compression
SUPPLY JOINTS CONTENTS
ACCESSORIES GENERAL CATALOG AIR TREATMENT, AUXILIARY, VACUUM, AND FLUORORESIN PRODUCTS CONTENTS Specifications, Order Codes, Size Table 371 Dimensions 373 NCU Specification Order Codes, Model Table 379
SCREWED BONNET NEEDLE VALVES
SCREWED BONNET NEEDLE VALVES H-99 SERIES FEATURES n Blowout-Proof Stem n MAWP* up to 1, psi (69 bar) n MAWT* up to 648 C (12 F) n End connection size range: to 1" or to 25mm n Flow Coefficient (Cv) to1.5
Rapid push-in fittings for plastic tubes Series 1000
CATALOGUE > Release 8.5 > Rapid fittings Series 1000 Rapid push-in fittings for plastic tubes Series 1000 Tube external diameters: 5/3, 6/, 8/6, 10/8, 12/10, 15/12,5 mm Fittings threads: metric (M5, M6,
DK-LOK Hydraulic Pipe Fittings
Class 2000, 3000, 6000, 9000 fittings Catalog No. C-2 June 2012 DK-LOK Hydraulic Pipe Fittings are designed and manufactured to the following standards. ASME B 16.11-2005: Forged fittings, Socket-welding
BRASS PIPE FITTINGS 100A-BA. CONSTRUCTION CA360, CA345, CA3604, CA377 Brass. Use with brass, copper or iron pipe. Temperature Range: 65 to +250 F.
RSS FITTINGS RSS FITTINGS CONSTRUCTION C360, C345, C3604, C377 rass PPLICTIONS RNGES Use with brass, copper or iron pipe Temperature Range: 65 to +250 F. Pressure Range: Up to 1000 PSI Pipe Thread ssembly:
Yl)HAl STrrl (INDIA) Forged High Pressure Pipe Fittings. All ISO 9001:2003/ ISO 14001:2004 / 8S Ol!SAS 18001:2007 / PED Al'PROl'ED 97/23/EC
Forged High Pressure Pipe Fittings Forged High Pressure Pipe Fittings Summary : Summary : Type 1. Elbow, Tee, Cross, Couplin g, Half Coupling, Cap, Plug, Bushing, Union, HEX. Nipple, Swage 2. nipple, Bull
120 SERIES ONE PIECE TYPE
120 SERIES ONE PIECE TYPE SBV 120H Series Features Simple design with one piece body Tight and smooth, low torque and easy operation One-piece ball stem Panel mountable Variety of End Connections Straight,
HIGH PRESSURE BAR STOCK BALL VALVES. VB6B Series.
HIGH PRESSURE BAR STOCK BA VAVES VB6B Series www.unilok.com s - VB6B Series Features Pressure rating up to 6000psig (413bar) @21 (70 ) with standard PTFE seats 10000psig (689bar) @21 (70 ) with optional
A Complete Range of Adaptors
A Complete Range of Adaptors Adaptors 0143 Page 9-7 0144 BSPT/ Page 9-7 0152 BSPT Page 9-7 0145 Page 9-7 0158 BSPT/ Page 9-7 0117 Page 9-8 0155 Page 9-8 0164 NPT/ Page 9-8 0167 BSPT/NPT Page 9-8 0168 Page
Inverted Dual High-Pressure Fluid Filter Assemblies
Instruction Sheet P/N 1093-04 Inverted Dual High Pressure Fluid Filter Assemblies Introduction WARNG: High pressure fluids are hazardous. To prevent serious injury when installing and servicing filters,
Integral-Bonnet Needle Valves
Integral-Bonnet Needle Valves 18, 20, and 26 Series Live-loaded packing system Compact design Working pressures up to 6000 psig (413 bar) Temperatures up to 600 F (315 C) Integral-Bonnet Needle Valves
Type 459. Type 459. Available designs. Cap H2. with bushing 19. Lock nut. Bonnet. Outlet flange 2.4 Outlet adaptor 2.1. spacer.
Available designs 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 9 Bonnet 16 Spring plate 54 Spring 12 Spindle 17 Spring plate 14 Split ring 60 Gasket 8 Guide 57 Pin 61 Ball 7 Disc 2 Outlet body
82 Series Fittings Table of Contents
Table of Contents ase Part Number with Description Table of Contents (page 1 of 1)... Page Number 30182 Male NPTF Pipe - Rigid Straight... -234 31382 Male NPTF Pipe - Swivel - Straight... -235 30282 Female
Bronze Fittings 125# and Flanges 150#
ronze Fittings Specifications branded bronze fittings are UL Listed Canadian egistration umbers available at www.smithcooper.com ronze fittings conform to WW C800 ronze castings conform to STM 62, US lloy
ISO 9001 Certified Fitting and Valve Manufacturer
ASM Accredited Nuclear & ISO900 Quality System ISO 900 Certified Fitting and Valve Manufacturer Catalog Number 0- January, 00 HYRAULIC SWAGING UNIT.HS-A Hydraulic Swaging Unit for Pre-Swaging Over Certificates
OUR COMPLETE ACCESSORIES LINE INCLUDES:
is for Accessories When it comes to accessories, no one can match Reinflex s extensive stock of OEM grade adapters, ball valves, fittings, pressure gauges, and quick disconnects. Many of our adapters are
Series 10-M. Miniature fittings. Construction. Tubing. Tubing. Barb. Barb. Body. Cap nut. Gasket. Body. Gasket Low tightening torque Tight seal
onstruction Miniature fittings Hose nipple arb fitting arb onfiguration for easy insertion into the Holds the tube tightly. ody lectroless plated nickel Low tightening torque Tight seal Tubing ap nut ertainly
Piping Material Specification - Piping class : CS101
Piping Material Specification - Piping class : CS101 SERVICE PROCESS (NG) BASIC MATERIAL CARBON STEEL RATING CLASS 150#, ASME B 16.5 DESIGN CODE ASME B 31.3 DESIGN TEMPERATURE NOMINAL CORROSION ALLOWANCE
Steel Conduits Conduit Fittings Flexible Conduits
Conduits Conduit Fittings Flexible Conduits CONTENT 1. INTRODUCTION VOLTECX products introduction and selecting VOLTECX 2. STEEL CONDUITS VOLTECX BS4568: Part 1: 1970 (Class 4) Conduit IEC 61386-21:2004;
Pneumatic Fittings & Tubing
Pneumatic Fittings & Tubing General Information Fitting escriptions Working Pressure Style Maximum Nominal onstruction pplication ompatible Tubing Poly-Flo 500 PSI 125 PSI Three-piece: body, nut Pneumatic
Fittings, Materials and Tubing Guide. Instrumentation Products
Fittings, Materials and Tubing Guide Fittings, Materials and Tubing Guide Instrumentation Products ISO onversion Fittings Visual Index ISO Fitting Nomenclature page 122 Typical Fastening s page 123 Forms
Discharge diameters 1.5", 2", 3", 4", 5", 6", 8", 10", 12" & 14" HP 1 to 500. Split Coupled Vertical In-Line Pumps BVL
Discharge diameters 1.5", 2", 3", 4", 5", 6", 8", 10", 12" & 14" HP 1 to 500 Split Coupled Vertical In-Line Pumps BVL Split Coupled Vertical In-Line Pumps Capacities up to 12,000 GPM Heads up to 560 ft
Replacement Parts List FI 1509 & FI 1509C. SUPERSEDES: September 21, 2016 EFFECTIVE: March 20, 2017
Replacement Parts List 304-364 FI 1509 & FI 1509C SUPERSEDES: September 21, 2016 EFFECTIVE: March 20, 2017 FI 1509 FI 1509C FI 1509C REQUIRED BEARING FRAME J BEARING FRAME H BEARING FRAME J 1 1 Impeller
INSTRUMENTATION UNION BONNET VALVES. VU6 Series.
INSTRUMENTATION UNION BONNET VALVES VU6 Series www.unilok.com Features Pressure rating up to 6000psig (413bar) @38 (100 ) Temperature rating from -53 (-65 ) to 232 (450 ) with standard PTFE packing, up
Quick-connects. QC, QF, QV and QM Series.
Quick-connects QC, Q, QV and QM ITOK Group ITOK Gmb (eadquarter) Sprendlinger andstr. 5, 309 Offenbach am Main, Germany Tel.: +9 9 900 9 ax: +9 9 900 95 ITOK, Inc. 33 North Promenade lvd., Suite 750, Stafford,
Flare Fittings. The World Standard. SAE 45 Flare. Inverted Flare. Access Valves
Flare Fittings SA 45 Flare eets SA Functional Requirements Resists Vibration Resists echanical Pull-out U isted Inverted Flare U isted conomical Steel ut option Access Valves Teflon Seal on Valve core
VCR Metal Gasket Face Seal Fittings
lloy 2507 Super uplex Weld Fittings 1 www.swagelok.com Metal Gasket Face Seal Fittings WL 1/16 to 1 in. and 6 to 18 mm sizes High-purity stainless steels The original design, the authentic brand 2 Weld,,
:,Rhino SD/XD G/D 24 Vdc ISO
:,Rhino SD/XDG/D Vdc ISO ()Rhino SD/XD() SD/XD Rhino SD/XDG/D Vdc ISO Rhino SD/XD, Rhino SD/Xd, (Rhino SD/XD) 006 Nordson Corporation P/N 75606A-0 Rhino SD/XDG/D Vdc ISO 0 9 5 8 7 6 P/N 75606A-0 006 Nordson
Semiconductor / High Purity Products FITTINGS TK SCT. Weld Fittings / Metal Seal Fittings. SCT Division
Semiconductor / High Purity Products K SC IINGS Weld ittings / etal Seal ittings SC ivision K SC SUPR CN CHNOOGY ICRO W IINGS ORG W IINGS C S IINGS 2 Super Clean itting Series W and etal Seal ittings components
Rhino VE Follower Modules
Instruction Sheet P/N 08 0 Description See Figure. The follower module attaches onto the hydraulic section of the pump (). It is designed to force material out of straight-sided containers. Follower plate
Gauge valves Type SNV-ST and SNV-SS
Data sheet Gauge valves Type and SNV-SS and SNV-SS valves are designed to meet all industrial refrigeration application requirements. Designed as service valves they provide favourable flow characteristics.
VCR Metal Gasket Face Seal Fittings
VR Metal Gasket ace Seal ittings 1/8 to 1 and 6 to 18 mm sizes high-purity stainless steels www.swagelok.com VR Metal Gasket ace Seal ittings Index General Information Glands ages 4, 5, 6 odies ages 6,
Type. Facts. Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 462 Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 461.16-E Available designs 40 18 Cap H2 Adjusting screw with bushing 19 Lock nut 9 Bonnet 16 Spring plate 54 Spring
Tube Fitting Valves Clean Fitting Pipe Fitting
Tube Fitting Valves Clean Fitting Pipe Fitting Greeting We, Union Metal as her registered brand Uni-Lok, founded in 1984, have been specialized in the design and manufacture of high performance Double
Item Component Remarks Type 4393 Type ), SA Vulcanized soft seal disc SA L SA L
Available designs materials Materials Item Component Remarks 3 4 1 Base / Inlet body 2 Outlet body Threaded connection Flange connection 2.1 Outlet adaptor Flange connection 2.4 Outlet flange Flange connection
Parts List Safety Stations
Safety Stations tem Part Number escription Shower eads P450-032OR Orange S Plastic Shower ead P450-032RN reen S Plastic Shower ead P450-032YL Yellow S Plastic Shower ead P450-048 10 ia. Stainless Steel
Replacement Parts List FI 4009 & FI 4009C. SUPERSEDES: April 28, 2016 EFFECTIVE: October 18, 2016
A Taco Family Company Replacement Parts List FI 4009 & FI 4009C 304-403 SUPERSEDES: April 28, 2016 EFFECTIVE: October 18, 2016 WHEN SELECTING AND ORDERING PARTS, ALWAYS REFER TO SERIAL ON NAMEPLATE 00
Female - Swivel. 45 Elbow. 45 Elbow (5000 psi) 16E78 B-96 16B78 B /2 Elbow. 60 Elbow 16N78 B Elbow. Female - Swivel Long 1C978 B-101
atalog 4400 US Visual Index Use with 781, 782T, 782ST hoses. 10178-94 10678-94 13978-94 NPTF Pipe Male - Rigid JI 37 ode 61 11578-94 1478-95 11778-95 14F78-95 11978-95 14N78-96 ode 62 (5000 psi) 1678-96
Description. Rhino SD2/XD2 Follower Modules
Rhino SD/XD Follower Modules Description See Figure. The follower module attaches onto the hydraulic section of the pump (). It is designed to force material out of straight-sided containers. Standard
BALL VALVES - VB3 Series
1 Piece Integral Stem Materials of Construction No. Description Body Material 1 Handle Directional Handle Materials Nylon Panel Mountable Nut Various End Connections & Sizes Compact 1 Piece Body BALL VALVES
Copper-Nickel Alloy for Seawater Piping Systems (CuNi 90/10)
Offshore OSNA -10 Copper-Nickel Alloy for Seawater Piping Systems (CuNi 90/10) KME Germany GmbH & Co. KG Offshore OSNA -10 [GB] Content KME - The Company 1 The Material 2 Offshore Product Range 3 Pipes
LF 3600 Push-In Fittings Range
LF 300 Push-In Fittings Range Stud Fittings Straights 375 BSPT Page 1-97 301 BSPP/Metric Page 1-97 31 Metric Page 1-97 31 BSPP/Metric Page 1-9 321 BSPT Page 1-9 331 BSPP/Metric Page 1-9 300 Page 1-9 Push-In
Male - Swivel B-168. Female - Swivel. Female - Swivel B-170. Standpipe. Female - Swivel 90 Elbow - Long 3D082 B-172.
Visual Index 30182-166 31382-166 30282-167 37G82-167 NPTF Pipe Male - Rigid 30382-167 Male - Swivel 30682-168 Female - Rigid 33782-168 NPSM Pipe 33982-168 Gasket Joint 34182-168 JI 37 S Male - Rigid 30482-169
for plastic tubes CONNECTION > Series 6000 super-rapid fittings GENERAL DATA Fitting with connecting tube Sprint
> Series 6000 super-rapid fittings CATALOGUE > Release 8.8 Series 6000 super-rapid fittings for plastic tubes Sprint Tube external diameters: 3,, 5, 6, 8, 10, 12, 1, 16 mm Fittings threads: metric (M3,
Super-rapid fittings Series X6000 in Stainless Steel 316L
> Super-rapid fittings Series X6000 Super-rapid fittings Series X6000 in Stainless Steel 316L CATALOGUE > s 2012 Tube external diameters:, 6, 8, 10, 12 mm Fittings threads: BSP (G1/8, G1/, G3/8, G1/2),
Series 10-M. RoHS. Miniature Fittings. Construction. Tubing. Tubing. Barb. Barb. Body. Cap Nut. Gasket. Body. Gasket.
Series 10-M Miniature Fittings onstruction RoHS irectional ontrol Valves arb onfiguration for easy insertion into the Holds the tube tightly. ody lectroless plated nickel Low tightening torque Tight seal
Lincoln installation components, accessories and lubrication fittings
Lincoln installation components, accessories and lubrication fittings People, capabilities and systems to save money and increase productivity Industry leader Continually satisfying our customers with
O-Rings. Back pressure may be required to reseal the valves with nominal cracking pressure of 5psi or lower.
Check Valves SPCV Series Features Fixed cracking pressure. Pressure rating up to 3000 psig @70 (21 ) Temperature rating up to 375 (191 ) with Viton O-Ring. Variety of end connections available. Every valve
S, M, L, and 31 Series. Straight-pattern flow coefficients (C v ) from to Low- and high-pressure service
www.swagelok.com Metering Valves S, M, L, and Straight-pattern flow coefficients (C v ) from 0.004 to 0.16 Low- and high-pressure service Repeatable vernier handles available rass and 316 stainless steel
Max. particle size 5 µm. Pressure for determining piston forces. Materials:
1 Working pressure min./max. 2 bar / 8 bar Ambient temperature min./max. -10 C / +60 C Medium Compressed air Max. particle size 5 µm Oil content of compressed air 0 mg/m³ - 1 mg/m³ Pressure for determining
PRESSURE REGULATORS PRESSURE REDUCING. APPLICATION: Regulation of inlet pressure to gas compressors. Control of supply or distribution system pressure
PRESSURE REDUCING APPLICATION: Regulation of inlet pressure to gas compressors. Control of supply or distribution system pressure PRESSURE RANGE: Upstream: 10 psig to 300 psig Downstream: 10 psig to 300
Type 437. Type 437. Available designs. Cap H2 Adjusting screw with bushing. Axial needle 69 beering. Lock nut. Spring plate. Spring plate. Pin.
Available designs 40 18 Cap H2 Adjusting screw with bushing 19 Lock nut Axial needle 69 beering 16 Spring plate 12 Spindle 54 Spring 2 Outlet body 17 Spring plate 57 Pin 61 Ball 7 Disc 1 Body Threaded
Series 8150 Replacement Parts for 8150 Series Fire Pumps PARTS LIST CP-608B-PL
Series 8150 Replacement Parts for 8150 Series Fire Pumps PARTS LIST CP-608B-PL SERIES 8150 CROSS SECTION 0-952-3 0-952-4 0-952-5 2-904-2 0-952-2 0-952-1 0-952-6 2-001-0 2-916-1 2-904-1 2-123-5 0-905-0
Standard screw fittings Brass Art. No to
251.02 Reducing nipple, short type Art. No. Ident No. Male thread Female thread 290.940 108010 M14x1.5 M10x1.0 11.0 7.0 17 290.941 108011 M24x1.5 M16x1.5 24.0 16.0 27 251.00 111101 G 1/8 M5 11.0 7.0 14
in stainless steel 316L
> Super-rapid fittings Series X6000 Super-rapid fittings Series X6000 in stainless steel 316L Tube external diameters:, 6, 8, 10, 12 mm Fittings threads: BSP (G1/8, G1/, G3/8, G1/2), BSPT (R1/8, R1/, R3/8,
Instrument Pipe & ISO Conversion Fittings. Catalog 4260 Revised, February 1999
Instrument Pipe & ISO Conversion ittings Catalog 4260 Revised, ebruary 1999 Instrument Pipe ittings Instrument Pipe ittings Introduction Parker Instrumentation Pipe ittings are designed as leakfree connections
Manifold & Gauge Valves I [
Instrument High Technology Valve, Flange & Fitting Series Manifold & Gauge Valves I [ Instrument Manifolds Stainless steel Bar handle Packing bolt permits stem packing adjustment. Stem thread enhance cycle
TUBE & PIPE SECTION D
TUBE & PIPE SECTION pirtekusa.com Page General Technical ata for Tube and Pipe... 2 Flow Rate & Temperature Recommendations... 3 Schedule 40, 80, 160 Pipe ata... 3 Tube ata Standard Sizes... 4 TUBE AN
BRASS FITTINGS (R410a) BRASS FITTINGS
(R410a) R410a Short Barrel Flare Nuts 5010404410A 1/4 $4.21 5010808410A 1/2 $8.52 5010504410A 5/16fl x 1/4 tube $5.73 5011010410A 5/8 $13.50 5010606410A 3/8 $7.08 5011212410A 3/4 $20.54 BRASS FITTINGS
FIT-2. Inch. Ø Â" to Ë" O/D tube
For simple and quick assembly of pneumatic circuits. Positive tube connection. Wide range of types available. Reliable and corrosion resistant. Specifications Fluid: Compressed air, nitrogen, inert and
Odor Removal Filter. Model. Note) 1 8, , , , 3 4. Model/Free Standing Type AMF (2B)JIS 10K FF flange
fficiently can remove odor in compressed air with an activated carbon element. The unit is designed for use in the area such as a clean room where odors must be avoided. an remove odor and gas ingredients
CM Body Assembly Service Parts List CM 93 and CM 04 Body Styles
Document Number Issue Date 12/01/93 Rev. Date 5/11/18 CM Body Assembly Service Parts List CM 93 and CM 04 Body Styles Body Style Identification Pump Material Body Style Pumps Built After 2004 Pumps Built
ACCESSORIES & FITTINGS 800 SERIES CONTROL VALVES
ACCESSORIES & FITTINGS 800 SERIES CONTROL VALVES 8 VALVE FITTING PART NUMBERS 2" & 3" PRESSURE REDUCING VALVES* 10645 8970-002 (9526-006) 1/4" tube (9526-006) Flow 8970-001 (9526-001) 8970-010 (9526-010)
Instrument Pipe Fittings Instrument Pipe Fittings Introduction Parker Instrumentation Pipe Fittings are designed as leakfree connections for process,
Instrument Pipe & ISO Conversion Fittings Catalog 4260 evised, February 1999 Instrument Pipe Fittings Instrument Pipe Fittings Introduction Parker Instrumentation Pipe Fittings are designed as leakfree
Type. Facts. Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric + US Units
Type 459 Safety Relief Valves spring loaded Metric + US Units Facts The-Safety-Valve.com Designs 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 9 Bonnet 16 Spring plate 54 Spring 12 Spindle 17 Spring
Parts List 8 AAT-60 and AAT-90 Auto-Adjust II Turbo-Meters
MP-1073C Rev. 3 Parts List 8 AAT-60 and AAT-90 Auto-Adjust II Turbo-Meters Parts List 8 AAT-60 and AAT-90 Auto-Adjust II Turbo-Meters Working Pressures: 175, 275, 720 & 1440 psig Copyright 2001 Invensys
Instrumentation Manifold Valves
Instrumentation Manifold Valves SM2V / SM3V / SM5V Series Ordering Information Example : SM2 V - F 8N - M40 1 2 3 4 5 1. Valve Series 2. Mounting Type 3. End Connection Type SM2 : 2-Valve Manifolds SM3
PART # DESCRIPTION OIL HOUSINGS PUMP RETROKIT FOR AMADA STYLE OILER (NO STATION) PUMP RETROKIT FOR FINN-POWER STYLE OILER (NO
PART # DESCRIPTION OIL HOUSINGS 11-00069 PUMP RETROKIT FOR AMADA STYLE OILER (NO STATION) 11-00070 PUMP RETROKIT FOR FINN-POWER STYLE OILER (NO STATION) PITCH INSERTS 10-10010 PITCH INSERT #24 10-10012
Lubrication Installation Components, Accessories & Fittings Table of Contents
Lubrication Installation Components, Accessories & Fittings Table of Contents Lubrication Fittings & Accessories: Introduction............................................. 2 Threaded Fittings........................................
Stop Needle Valves SNV-ST and SNV-SS
MAKING MODERN LIVING POSSIBLE Technical brochure Stop Needle Valves and SNV-SS www.danfoss.com/ir Stop Needle Valve, type and SNV-SS Contents Page Introduction........................................................................................
SERIES RTC RODLESS CYLINDERS PNEUMATIC SHUTTLE TYPE
SERIES RTC RODLESS CYLINDERS PNEUMATIC SHUTTLE TYPE Series RTC Rodless Cylinder Pneumatic automation building block Series RTC (Rodless Thrust Cylinder)-High performance shuttle type rodless cylinders