Instrumentation Pipe & Weld Fittings. No.03-9 August 2017
|
|
- Jonathan Reeves
- 5 years ago
- Views:
Transcription
1 Instrumentation ipe & Weld Fittings No.03-9 August 2017
2 Instrumentation ipe & Weld Fittings Technical Information Thread Fittings Close Nipple GNC 04 ipe lug G 07 Tee GT 10 ex Nipple GN ex Reducing Nipple GNR ex Nipple GN ex Coupling GCG ex Reducing Coupling GCGR Union Ball Joint GJU Run Tee GTR Branch Tee GTB Male Tee GTM ex Nipple GN 05 ISO arallel Copper GASKT DGC 08 Cross GX 11 ex ong Nipple GN 05 ollow ex lug GA 08 Adapter GAAMF 06 ollow ex lug GB 08 Reducing Adapter GABMF 06 Snubber Fitting GS 09 Adapter GACMF 06 lbow G 09 Adapter GADMF 06 Street lbow GS 09 Reducing ex Bushing GB 07 Reducing Street lbow GSR 10 ipe Cap GC 07 Male lbow GM 10 1 All dimensions are in millimeters unless otherwise specified and only for reference subject to change.
3 10K Thread Fittings Thread Fittings for Over1 Weld Fittings lbow G-10K 12 lbow G-6K 15 Union GUSW 16 Tee GT-10K 12 Tee GT-6K 15 Union lbow GSW 16 Cross GX-10K 13 ex Coupling GCG-6K 15 Union Tee GTSW 16 ex Nipple GN-10K 13 ex Coupling GN-6K 15 Male Connector GCMSW 16 ex Coupling GCG-10K 13 Cross GX-6K 15 Female Connector GCFSW 17 Male Adapter GAAMF-10K 13 Male lbow GMSW 17 Reducing Adapter GABMF-10K 14 Female lbow GFSW 17 Reducing Adapter GAMF-10K 14 ipe to Tube Socket Weld GUWSW 17 Tube to Tube Socket Weld GUTWSW 18 All dimensions are in millimeters unless otherwise specified and only for reference subject to change. 2
4 Instrumentation ipe & Weld Fittings Instrumentation ipe & Weld Fittings 6000psig, 10000psig and standard rating DK-ok Thread Fittings Three different ratings are available to fit your specific application. Standard rating : page 3 10,000 psig : page 12 g : page 15 DK-ok Weld Fittings See page 16 Tube Socket Weld ipe Butt-weld Features of DK-ok Thread Fittings flat body design allowing standard ex. wrench assembly. Attractive finishes to suit precision equipment. Much less-weight design compared to Class 3000 pipe fittings. Fine pipe thread construction equals or exceeds the requirement of ASM B to ensure maximum thread engagement. Male pipe threads capped for protection from damages. Fitting materials available in SS316, and Carbon Steel. Thread Fittings - Standard Rating DK-ok Thread Fittings - Standard Rating are designed to the requirements of ASM B31.3 process piping code. The pipe thread sizes are available 1/8 to 1 Table 1. ressure Ratings Stainless Steel 316 Carbon Steel Size /ISO Male Female Male Female Male Female Designator ipe Size bar psig bar psig bar psig bar psig bar psig bar psig 2 1/ , , , , , , / , , , , , , / , , , , , , / , , , , , , / , , , , , , , , , , , ,300 ressure ratings listed are for temperature up to 37 (100 ) ressure rating is calculated at -28 to 37 (-20 to 100 ) using allowable stress value of 20,000psi for SS316, 10,000psi for, and 20,000psi for Carbon Steel as per ASM B31.3 rocess iping Code. To determine the working pressure of ASM B31.1 ower iping Code, multiply the ASM B31.3 rating by pressure ratings remain the same. The pressure ratings of reducing hex bushing (GB), pipe plug (G), and shaped fittings such as lbow, Tee, Crosses are not covered in this table. See the pressure rating in the dimensional table. 3 All dimensions are in millimeters unless otherwise specified and only for reference subject to change.
5 Table 2. Material Standards and Temperature Range Materials Bar Stock Forgings Maximum Temperature Stainless Steel 316 ASTM A276 Type 316 / ASTM A479 Type 316 ASTM A182 F (1000 ) JIS 3250 C3604 / ASTM B453 C35300 JIS 3250 C3771 / ASTM B283 C (400 ) Carbon Steel ASTM A108 / JIS G4051 S20C - S48C ASTM A105 / JIS G4051 S20C - S48C 190 (375 ) Table 3. Temperature De-rating Factors Temp ,000 1, Stainless Steel Factor Carbon Steel shown in table 3. xample: The working pressure of GNC-2N-S at psig x 0.82 = 8200 psig. Table 4. Temperature Ratings of O-ring, Gasket Materials System temperature may be limited by the O-ring, Gasket material or thread sealant. Component Applicable # Material Temperature Ratings Designator : BN NBR -20 to 105 (-4 to 221 ) O-ring Designator : VT FKM -28 to 204 (-18 to 400 ) Designator : KZ FFKM -30 to 275 (-22 to 527 ) Copper Gasket DGC- Copper -198 to 204 (-324 to 400 ) NBR bonded Gasket DGB- NBR bonded Carbon Steel Ring -40 to 110 (-40 to 230 ) FKM bonded Gasket DGV- FKM bonded bonded Stainless Steel Ring -28 to 204 (-20 to 400 ) Table 5. ipe Thread Designator ISO Thread Designator ipe ASM B Tapered ISO 7-1 arallel ISO /8 2N 2R 2G 4 1/4 4N 4R 4G 6 3/8 6N 6R 6G 8 1/2 8N 8R 8G 12 3/4 12N 12R 12G N 16R 16G COS NI GNC Male both ends ow to order a material designator below. xample: G-2N-S Material Material Designator SS 316 / 316 Dual Grade X NI GN Male both ends Carbon Steel S C B GNC- 2N 1/ GNC- 4N 1/ GNC- 6N 3/ GNC- 8N 1/ GNC-12N 3/ GNC-16N ex GN- 2N 1/ GN- 4N 1/ GN- 6N 3/ GN- 8N 1/ GN-12N 3/ GN-16N
6 X RDUCING NI GNR Male to reduced male X NI GN Male to ISO tapered 1 Reduced ex GNR 4-2N 1/4 1/ GNR 6-2N 3/8 1/ GNR 6-4N 3/8 1/ GNR 8-2N 1/2 1/ GNR 8-4N 1/2 1/ GNR 8-6N 1/2 3/ GNR 12-4N 3/4 1/ GNR 12-8N 3/4 1/ GNR 16-4N 1 1/ GNR 16-8N 1 1/ ISO Thread Size ex GN- 2NR 1/8 1/8-28 (7-1) GN- 4NR 1/4 1/4-19 (7-1) GN- 6NR 3/8 3/8-19 (7-1) GN- 8NR 1/2 1/2-14 (7-1) GN-12NR 3/4 3/4-14 (7-1) GN-16NR (7-1) X NI GN Male to male ISO parallel X ONG NI GN Male both ends 1 B C GN- 2NG 1/8 GN- 4NG 1/4 GN- 6NG 3/8 GN- 8NG 1/2 GN-12NG 3/4 GN-16NG 1 ISO Thread Size 1/8-28 1/4-19 3/8-19 1/2-14 3/ ex ex GN- 2N 1/ GN- 4N 1/ GN- 6N 3/ GN- 8N 1/ GN-12N 3/ GN-16N
7 Thread Fittings - Standard Rating ADATR GAAMF Male to equal female RDUCING ADATR GABMF Male to larger female ex GAAMF- 2N 1/ GAAMF- 4N 1/ GAAMF- 6N 3/ GAAMF- 8N 1/ GAAMF-12N 3/ GAAMF-16N Male Female ex GABMF 2-4N 1/8 1/ GABMF 2-6N 1/8 3/ GABMF 4-6N 1/4 3/ GABMF 2-8N 1/8 1/ GABMF 4-8N 1/4 1/ GABMF 6-8N 3/8 1/ GABMF 4-12N 1/4 3/ GABMF 6-12N 3/8 3/ GABMF 8-12N 1/2 3/ GABMF 4-16N 1/ GABMF 8-16N 1/ GABMF 12-16N 3/ ADATR GACMF Male ISO tapered to Female ADATR GADMF Male ISO parallel to female GACMF- 2RN 1/8 GACMF- 4RN 1/4 GACMF- 6RN 3/8 GACMF- 8RN 1/2 GACMF-12RN 3/4 GACMF-16RN 1 1 ISO Thread Size 1/8-28 (7-1) 1/4-19 (7-1) 3/8-19 (7-1) 1/2-14 (7-1) 3/4-14 (7-1) 1-11 (7-1) D ex GADMF- 2GN 1/8 GADMF- 4GN 1/4 GADMF- 6GN 3/8 GADMF- 8GN 1/2 GADMF-12GN 3/4 GADMF-16GN 1 1 ISO Thread Size 1/8-28 1/4-19 3/8-19 1/2-14 3/ B C ex
8 RDUCING X BUSING GB Male to reduced female Male 1 Female ex Working ressure bar (psig) SS316,C.Steel GB 4-2N 1/4 1/ (6400) 227 (3200) GB 6-2N 3/8 1/ (9100) 323 (4600) GB 6-4N 3/8 1/ (6500) 227 (3200) GB 8-2N 1/2 1/ (12100) 427 (6100) GB 8-4N 1/2 1/ (8200) 303 (4300) GB 8-6N 1/2 3/ (5200) 179 (2500) GB12-4N 3/4 1/ (11900) 413 (5900) GB12-6N 3/4 3/ (8100) 296 (4200) GB12-8N 3/4 1/ (4800) 165 (2300) GB16-4N 1 1/ (14400) 509 (7300) GB16-8N 1 1/ (8500) 296 (4200) GB16-12N 1 3/ (5200) 179 (2500) I CA GC Female I UG G Male ex ex GC- 2N 1/ GC- 4N 1/ GC- 6N 3/ GC- 8N 1/ GC-12N 3/ GC-16N G- 2N 1/ G- 4N 1/ G- 6N 3/ G- 8N 1/ G-12N 3/ G-16N
9 Thread Fittings - Standard Rating X COUING GCG Female both ends X RDUCING COUING GCGR Female to reduced female ex GCG- 2N 1/ GCG- 4N 1/ GCG- 6N 3/ GCG- 8N 1/ GCG-12N 3/ GCG-16N Reduced ex GCGR 4-2N 1/4 1/ GCGR 6-4N 3/8 1/ GCGR 8-2N 1/2 1/ GCGR 8-4N 1/2 1/ GCGR 8-6N 1/2 3/ GCGR 12-4N 3/4 1/ GCGR 16-12N 1 3/ UNION BA JOINT GJU Female both ends ISO ARA COR GASKT DGC For ISO arallel male thread ex 1 GJU- 2N 1/ GJU- 4N 1/ GJU- 6N 3/ GJU- 8N 1/ GJU-12N 3/ GJU-16N ISO D DGC- 2 1/ DGC- 4 1/ DGC- 6 3/ DGC- 8 1/ DGC-12 3/ DGC OOW X UG GA Male SA/MS Straight Thread OOW X UG GB Male SA/MS Thread B C Uniform O-ring Size GA- 4U 7/ GA- 6U 9/ GA- 8U 3/ GA-12U 1 1/ GA-16U 1 5/ B C GB - 2N 1/ GB - 4N 1/ GB - 6N 3/ GB - 8N 1/
10 SNUBBR FITTING GS Snubber fitting consists of fitting and sintered SS316 element. This protects pressure gauge or instruments from system pressure surge and shock. The sintered element damps (snubs) the line pressure shock but It eventually allows the gauge to readout the line pressure, reducing the gauge s response time. Working ressure at 20 C (70 F) bar(psig) SS316 GS-MF-4N-05* 1/ /4 303 (4400) 151 (2200) GS-MF-8N-05* 1/ / (4900) 165 (2400) lement Designator* ore Size Range, lement orosity % % % % % % 0.50 Cv BOW G Female both ends STRT BOW GS Female to male ressure Rating psi (bar) SS316, C.Steel S ressure Rating psi (bar) SS316, C.Steel G- 2N 1/ (427) 3100 (213) GS- 2N 1/ (427) 3100 (213) G- 4N 1/ (496) 3600 (248) GS- 4N 1/ (496) 3600 (248) G- 6N 3/ GS- 6N 3/ G- 8N 1/ GS- 8N 1/ G-12N 3/ (351) 2500 (172) GS-12N 3/ (351) 2500 (172) G-16N (440) 3200 (220) GS-16N (365) 2600 (179) 9 All dimensions are in millimeters unless otherwise specified and only for reference subject to change.
11 Thread Fittings - Standard Rating RDUCING STRT BOW GSR Female to reduced Male MA BOW GM Male both ends 1 Male S ressure Rating psi (bar) SS316, C.Steel S ressure Rating psi (bar) SS316, C.Steel GSR 4-2N 1/4 1/ (496) 3600 (248) GM - 2N 1/ (689) 5000 (344) GSR 6-4N 3/8 1/ GM - 4N 1/ (551) 4000 (275) GSR 8-4N 1/2 1/ GM - 6N 3/ (537) 3900 (268) GSR 8-6N 1/2 3/ GM - 8N 1/ (530) 3800 (261) GSR12-8N 3/4 1/ (351) 2500 (172) GM - 12N 3/ (502) 3600 (248) GSR16-8N 1 1/ (365) 2600 (179) GM - 16N (365) 2600 (179) T GT Female RUN T GTR Female to male to female ressure Rating psi (bar) SS316, C.Steel S ressure Rating psi (bar) SS316, C.Steel GT- 2N 1/ (437) 3100 (213) GTR- 2N 1/ (427) 3100 (213) GT- 4N 1/ (496) 3600 (248) GTR- 4N 1/ (496) 3600 (248) GT- 6N 3/ GTR- 6N 3/ GT- 8N 1/ GTR- 8N 1/ GT-12N 3/ (351) 2500 (172) GTR-12N 3/ (351) 2500 (172) GT-16N (440) 3200 (220) GTR-16N (365) 2600 (179) 10
12 Thread Fittings - Standard Rating BRANC T GTB Female to female to male MA T GTM Male S ressure Ratings, psig(bar) SS316, C.Steel S ressure Ratings, psig(bar) SS316, C.Steel GTB- 2N 1/ (427) 3100 (213) GTM- 2N 1/ (689) 5000 (344) GTB- 4N 1/ (496) 3600 (248) GTM- 4N 1/ (551) 4000 (275) GTB- 6N 3/ GTM- 6N 3/ (537) 3900 (268) GTB- 8N 1/ GTM- 8N 1/ (530) 3800 (261) GTB-12N 3/ (351) 2500 (172) GTM-12N 3/ (502) 3600 (248) GTB-16N (365) 2600 (179) GTM-16N (365) 2600 (179) CROSS GX Female ressure Ratings, psig(bar) SS316, C.Steel GX- 2N 1/ GX- 4N 1/ GX- 6N 3/ GX- 8N 1/ GX-12N 3/ GX-16N (427) 7200 (496) 5100 (351) 5300 (365) 3100 (213) 3600 (248) 2500 (172) 2600 (179) 11
13 10K Thread Fittings ressure Rating : 10,000 psi (690 bar) Instrumentation ipe & Weld Fittings DK-ok 10K Thread Fittings are especially designed to assure safe service in the high pressure application of psig. The 10,000 psig working pressure satisfy the design requirements of ASM B31.3 rocessing ipe Code. 10K Rating Standard Rating Features The fittings are available in 1/8 through 1 pipe threads. The Male ipe Threads are precisely rolled for a high pressure application. Fittings are available only in stainless steel material. Therefore the part numbers of these fittings include the material designator -S. Table 5. Material Standards Material Form Standards Stainless Steel 316 Bar Stock ASTM A276 Type 316 / ASTM A479 Type 316 Forging ASTM A182 F316 BOW G-10K Female both ends T GT-10K Female () G-2N-10K-S 1/8 13/16(20.65) 26.0 G-4N-10K-S 1/4 1(25.4) 37.0 G-6N-10K-S 3/8 (31.75) 46.5 G-8N-10K-S 1/2 1-11/16(42.86) 50.0 G-12N-10K-S 3/ G-16N-10K-S () 1 GT-2N-10K-S 1/8 13/16(20.65) GT-4N-10K-S 1/4 1(25.4) GT-6N-10K-S 3/8 (31.75) GT-8N-10K-S 1/2 1-11/16(42.86) GT-12N-10K-S 3/ GT-16N-10K-S
14 CROSS GX-10K Female both ends X NI GN-10K Male both ends () 1 X () 1 GX-2N-10K-S 1/8 13/16 (20.65) GN-2N-10K-S 1/8 7/16 (11.11) GX-4N-10K-S 1/4 1 (25.4) GN-4N-10K-S 1/4 9/16 (14.28) GX-6N-10K-S 3/8 (31.75) GN-6N-10K-S 3/8 11/16 (17.46) GX-8N-10K-S 1/2 1-11/16 (42.86) GN-8N-10K-S 1/2 7/8 (22.2) GX-12N-10K-S 3/ GN-12N-10K-S 3/4 1-1/16 (26.98) GX-16N-10K-S GN-16N-10K-S 1 1-3/8 (34.92) X COUING GCG-10K Female both ends ADATR GAAMF-10K Female to male X () X () GCG-2N-10K-S 1/8 13/16 (20.65) 20.5 GAAMF-2N-10K-S 1/8 13/16 (20.65) 27.9 GCG-4N-10K-S 1/4 1 (25.4) 30.2 GAAMF-4N-10K-S 1/4 1 (25.4) 36.7 GCG-6N-10K-S 3/8 (31.75) 33.2 GAAMF-6N-10K-S 3/8 (31.75) 38.5 GCG-8N-10K-S 1/2 (38.1) 39.6 GAAMF-8N-10K-S 1/2 (38.1) 51.3 GCG-12N-10K-S 3/4 1-3/4 (44.4) 41.1 GAAMF-12N-10K-S 3/4 1-3/4 (44.4) 52.1 GCG-16N-10K-S 1 2-1/8 (53.9) 50.8 GAAMF-16N-10K-S 1 2-1/8 (53.9)
15 10K Thread Fittings RDUCING ADATR GABMF-10K Male to larger female RDUCING ADATR GAMF-10K Male to reduced female 1 X () 1 X () GABMF2-4N-10K-S 1/8 1/4 GABMF4-6N-10K-S 1/4 3/8 GABMF4-8N-10K-S 1/4 1/2 GABMF4-12N-10K-S 1/4 3/4 GABMF6-8N-10K-S 3/8 1/2 1 (25.4) (31.75) (38.1) 1-3/4 (44.4) (38.1) GAMF4-2N-10K-S 1/4 1/8 GAMF6-2N-10K-S 3/8 1/8 GAMF6-4N-10K-S 3/8 1/4 GAMF8-2N-10K-S 1/2 1/8 GAMF8-4N-10K-S 1/2 1/4 GAMF8-6N-10K-S 1/2 3/8 13/16 (20.65) 13/16 (20.65) 1 (25.4) 7/8 (22.2) 1 (25.4) (31.75) GABMF6-12N-10K-S 3/8 3/4 GABMF6-16N-10K-S 3/8 1 GABMF8-12N-10K-S 1/2 3/4 GABMF8-16N-10K-S 1/2 1 GABMF12-16N-10K-S 3/ /4 (44.4) 2-1/8 (53.9) 1-3/4 (44.4) 2-1/8 (53.9) 2-1/8 (53.9) GAMF12-4N-10K-S 3/4 1/4 GAMF12-6N-10K-S 3/4 3/8 GAMF12-8N-10K-S 3/4 1/2 GAMF16-4N-10K-S 1 1/4 GAMF16-8N-10K-S 1 1/2 GAMF16-12N-10K-S 1 3/4 1-1/16 (26.98) (31.75) (38.1) 1-3/8 (34.92) (38.1) 1-3/4 (44.4)
16 Instrumentation ipe & Weld Fittings Thread Fittings for Over 1 ressure Rating : () DK-ok 6K Thread Fittings are developed especially for over 1 piping system where g pressure rating is required. rocessing ipe Code. Features The fittings are available in 1 1/4, 1 1/2 and 2 pipe threads. Fittings are available only in stainless steel material. Therefore the part numbers of these fittings include the material designator -S. BOW G-6K Female both ends T GT-6K Female G-20N-6K-S G-24N-6K-S G-32N-6K-S Working ressure () 2-3/4 (69.85) 2-3/4 (69.85) (76.2) 70 GT-20N-6K-S GT-24N-6K-S GT-32N-6K-S Working ressure () 2-3/4 (69.85) 2-3/4 (69.85) (76.2) X COUING GCG-6K Female both ends X NI GN-6K Male both ends GCG-20N-6K-S GCG-24N-6K-S GCG-32N-6K-S Working ressure 2 X () 2-1/8 (53.9) 2-3/4 (69.85) 3 (76.2) GN-20N-6K-S GN-24N-6K-S GN-32N-6K-S Working ressure 2 X () 1-3/4 (44.45) 2 (50.8) 2-3/4 (69.85) CROSS GX-6K Female GX-20N-6K-S GX-24N-6K-S GX-32N-6K-S Working ressure 2 X () 2-3/4 (69.85) 2-3/4 (69.85) 3 (76.2)
17 Weld Fittings Instrumentation ipe & Weld Fittings cycling. Tube socket end design meets and exceeds the requirments of ASM B16.11 for ease of tube socket welding. Features DK-ok weld tube socket ports have a tapered sizing angle at the end that holds tubing properly and provides approx. This feature allows consistent welding assembly as well as pre-assembly of many tubing runs before welding. Fittings are available in stainless steel only. Thus the part number of table below contains the material designator-s. Tapered sizing angle provides approx. 1.5 gap Technical information corrosion resistance. the same ressure ratings shown in the dimensional tables are calculated in accordance with the requirements of ASM B31.3 UNION GUSW Tube to Tube UNION BOW GSW Tube to Tube T d D Working ressure Tube O.D psig bar GUSW- 4T-S 1/ , GUSW- 6T-S 3/ , GUSW- 8T-S 1/ , GUSW-10T-S 5/ , GUSW-12T-S 3/ , GUSW-16T-S , UNION T GTSW Tubes T d D Working ressure Tube O.D psig bar GSW- 4T-S 1/ , GSW- 6T-S 3/ , GSW- 8T-S 1/ , GSW-10T-S 5/ , GSW-12T-S 3/ , GSW-16T-S , MA CONNCTOR GCMSW T d D Working ressure Tube O.D psig bar GTSW- 2T-S 1/ , GTSW- 4T-S 1/ , GTSW- 6T-S 3/ , GTSW- 8T-S 1/ , GTSW-10T-S 5/ , GTSW-12T-S 3/ , GTSW-16T-S , T d D Tube O.D Working ressure psig bar GCMSW4T- 4N-S 1/4 1/ , GCMSW6T- 4N-S 3/8 1/ , GCMSW6T- 6N-S 3/8 3/ , GCMSW6T- 8N-S 3/8 1/ , GCMSW8T- 4N-S 1/2 1/ , GCMSW8T- 6N-S 1/2 3/ , GCMSW8T- 8N-S 1/2 1/ , ex 16
18 FMA CONNCTOR GCFSW Tube to female MA BOW GMSW Tube to male T Tube O.D - d D ex Working psig ressure bar GCFSW 2T- 2N-S 1/8 1/ GCFSW 4T- 2N-S 1/4 1/ GCFSW 4T- 4N-S 1/4 1/ GCFSW 6T- 4N-S 3/8 1/ GCFSW 8T- 6N-S 1/2 3/ GCFSW 8T- 8N-S 1/2 1/ GCFSW10T- 8N-S 5/8 1/ GCFSW12T-12N-S 3/4 3/ T Tube O.D - d D S Working psig ressure bar GMSW 4T- 4N-S 1/4 1/ GMSW 6T- 4N-S 3/8 1/ GMSW 6T- 6N-S 3/8 3/ GMSW 6T- 8N-S 3/8 1/ GMSW 8T- 8N-S 1/2 1/ GMSW12T-12N-S 3/4 3/ FMA BOW GFSW Tube to female I TO TUB SOCKT WD GUWSW ipe to Tube ipe to Tube T Tube O.D - d D 1 Working ressure psig bar GFSW4T-4N-S 1/4 1/ GFSW6T-4N-S 3/8 1/ GFSW6T-8N-S 3/8 1/ GFSW8T-8N-S 1/2 1/ ipe Size T Tube Socket O.D d D Working ressure psig bar GUWSW4-4T-S 1/4 1/ GUWSW6-6T-S 3/8 3/ GUWSW6-8T-S 3/8 1/ GUWSW8-4T-S 1/2 1/ GUWSW8-6T-S 1/2 3/ GUWSW8-8T-S 1/2 1/ GUWSW12-6T-S 3/4 3/ GUWSW12-8T-S 3/4 1/
19 Weld Fittings TUB TO TUB SOCKT WD GUTWSW T Tube O.D T1 Tube Socket O.D d D Working ressure psig bar GUTWSW 4T- 2T-S 1/4 1/ GUTWSW 6T- 4T-S 3/8 1/ GUTWSW 8T- 4T-S 1/2 1/ GUTWSW 8T- 6T-S 1/2 3/ GUTWSW 12T- 8T-S 3/4 1/ GUTWSW 16T- 8T-S 1 1/ NOT All dimensions are subject to change. All the dimensions shown in this catalog are not for design purpose, but for reference only and the accuracy of information here is not the liability of our company. 18
20 Safe Component Selection The selection of component for any applications or system design must be considered to ensure safe performance. Component function, material compatibility, component ratings, proper installation, operation and maintenance remain the sole responsibility of the system designer and the user. DK-ok accepts no liability for any improper selection, installation, operation or maintenance. ead Quartersand Factory 7, Golden root-ro 129beon-gil, Juchon-myeon, Gimhae-si, Gyeongsangnam-do, South Korea Tel Fax
Pipe Fittings. We deliver confidence through quality products
We deliver confidence through quality products INTRODUCTION I ITTINGS SD's recision pipe fittings are designed and manufactured to very stringent tolerances under rigid quality control procedures, to provide
More informationClean Fittings. No.06-2 August 2015
Clean Fittings No.06-2 ugust 205 Clean Fitting Contents Clean Weld Fittings Mini lbow WM Mini ee WM Mini Cross WMX Mini educing lbow WM Mini educing ee WM Mini educing Union WMU ong lbow W ong ee W ong
More informationInstrument Thread Fittings. High Technology Valve & Fitting Series
igh Technology Valve & Fitting Series ow To Order IN - 8 NR - SS IRN - 8-6N - B INSTRUMNT TRD FITTINGS FITTING TYP PIP TRD SIZ PIP TRD TYP MTRI Pressure Ratings Size Designator 2 4 6 8 2 6 20 24 32 Size
More informationInstrument Thread Fittings High Technology Valve & Fitting Series
igh Technology Valve & Fitting Series ow To Order IN - 8 NR - SS IRN - 8-6N - B INSTRUMNT TRD FITTINGS FITTING TYP PIP TRD SIZ PIP TRD TYP MTRI Pressure Ratings Size Designator 2 4 6 8 2 6 20 24 32 Size
More informationPipe Fittings 1/16 to 1 in. sizes 316 stainless steel, brass, and carbon steel NPT, ISO/BSP, and SAE threads
www.swagelok.com Pipe Fittings 1/16 to 1 sizes 316 stainless steel, brass, and carbon steel, /SP, and S threads 2 Pipe Fittings Contents Nipples Page 4 dapters, Gaskets Page 6 Reducing ushings, Reducers
More informationPipe Fittings. HP Series
Pipe Fittings HP Series Contents Pipe Plug Hollow Hex Plug Close Nipple Special Pipe Nipple Hex Nipple Hex Long Nipple Reducing ushing Pipe Cap Hex Coupling Union all Joints Adaper Male lbow Street lbow
More informationINSTRUMENTATION. Tube Fittings. Catalog Number 01-5 November,
INSTRUMNTATION Tube Fittings Catalog Number 0-5 November, 009 www.dklok.com Index Union U Tube to Tube Union Thermocouple Connector MCT Tube to Female Pipe Female Connector CF-N 9,40 Union lbow Union Tee
More informationTHE PREMIUM QUALITY. Hydraulic Swaging Unit for Pre-Swaging Over 1. Catalog Number 01-5 March, 2009 HYDRAULICSWAGINGUNIT.
TH PRMIUM QUAITY Catalog Number 0-5 March, 009 HYRAUICSWAGINGUNIT.HS-A Hydraulic Swaging Unit for Pre-Swaging Over www.dklok.com Index Union U Tube to Tube Union Thermocouple Connector MCT Tube to Female
More informationTHE PREMIUM QUALITY. Catalog Number 01-5 November,
TH PRMIUM QUAITY Catalog Number 0-5 November, 009 www.dklok.com Index Union U Tube to Tube Union Thermocouple Connector MCT Tube to Female Pipe Female Connector CF-N 9,40 Union lbow Union Tee T Union Cross
More informationV33, VP33, VA33, VDA33, VH36 and VL36 Series for VCH36 Series for CNG/NGV applications Pressures up to 3,000 psig (206 bar) and 6,000 psig (413 bar)
Valves Check Valves V33, VP33, VA33, VDA33, VH36 and VL36 Series for VCH36 Series for CNG/NGV applications Pressures up to 3,000 psig (206 bar) and 6,000 psig (413 bar) No.V336-9 November 2014 Fixed cracking
More informationVC & VPC Series Check Valves
VC & VPC Series Check Valves Up to 10 000psig (689 bar), Steel, and Brass Catalog No. VC-4 July 2015 Design VC and VPC Series Check Valves are designed to prevent reverse flow and keep the fluid in one
More informationDK-Lok UHP Fittings. No.09-01(E) May 2017
K-ok UP Fittings No.09-01() May 2017 ean UP Fitting ontents ean Wed Fittings Micro bow WM Micro ee WM Micro ross ee WMX Micro ribow WMB Micro af bow WM Micro Reducing bow WMR Micro Reducing ee WMR 05 05
More informationTable Of Contents. Assembly Instructions. Identification of Sync-Lok Tube Fittings. Reducing Port Connector 36. Male Elbow 11
able Of Contents eneral Information 1 Union Cross 27 Ordering Information 3 Reducer 28 ube Selection Data 5 Bulkhead Reducer 29 Male Connector 7 Male Adapter 31 Male Bore hrough Connector 9 emale Adapter
More informationProduct warranty. Quality Policy. The Goal
About the Company SEALEXCEL (INDIA) PVT. LTD. is a fast growing manufacturing company in the field of design, development, production and marketing of high quality valves and fittings for international
More informationPipe Fittings. 1/16 to 1 in. sizes. 316 stainless steel, brass, and carbon steel. NPT, ISO/BSP, and SAE threads.
Pipe Fittings 1 www.swagelok.com Pipe Fittings PIP 1/16 to 1 sizes 316 stainless steel, brass, and carbon steel, /SP, and S threads 2 Weld, VCR, VCO, Pipe, and Vacuum Fittings Contents Nipples Page 4 Crosses
More informationV33, VP33, VA33, VDA33, VH36 and VL36 Series for VCH36 Series for CNG/NGV applications Pressures up to 3,000 psig (206 bar) and 6,000 psig (413 bar)
Valves Check Valves V33, VP33, VA33, VDA33, VH36 and VL36 Series for VCH36 Series for CNG/NGV applications Pressures up to 3,000 psig (206 bar) and 6,000 psig (413 bar) No.V336-9 November 2014 Fixed cracking
More informationVCR Metal Gasket Face Seal Fittings
VR Metal Gasket ace Seal ittings 1/8 to 1 and 6 to 18 mm sizes high-purity stainless steels www.swagelok.com VR Metal Gasket ace Seal ittings Index General Information Glands ages 4, 5, 6 odies ages 6,
More informationSCREWED BONNET NEEDLE VALVES
SCREWED BONNET NEEDLE VALVES H-99 SERIES FEATURES n Blowout-Proof Stem n MAWP* up to 1, psi (69 bar) n MAWT* up to 648 C (12 F) n End connection size range: to 1" or to 25mm n Flow Coefficient (Cv) to1.5
More informationBRASS HOSE BARBS G21B
BRASS HOSE BARBS For clamshell packaged parts add: PAK to the part number. Eg... G20B-025:PAK, etc. Part Pipe Hose PRICE EACH Pkg Number Size I.D. PAK Loose Std Pkg Qty G2B45 45 MALE NPT HOSE BARB Part
More informationMetal Gasket Face Seal Fittings
Metal Gasket ace Seal ittings Series IOK Group IOK GmbH (Headquarter) Sprendlinger andstr. 5, 63069 Offenbach am Main, Germany el.: +49 69 8900 4498 ax: +49 69 8900 4495 IOK, Inc. 3843 North romenade lvd.,
More informationDK-LOK Hydraulic Pipe Fittings
Class 2000, 3000, 6000, 9000 fittings Catalog No. C-2 June 2012 DK-LOK Hydraulic Pipe Fittings are designed and manufactured to the following standards. ASME B 16.11-2005: Forged fittings, Socket-welding
More informationISO 9001 Certified Fitting and Valve Manufacturer
ASM Accredited Nuclear & ISO900 Quality System ISO 900 Certified Fitting and Valve Manufacturer Catalog Number 0- January, 00 HYRAULIC SWAGING UNIT.HS-A Hydraulic Swaging Unit for Pre-Swaging Over Certificates
More informationVCR. Metal Gasket Face Seal Fittings. 1/16 to 1 in. and 6 to 18 mm sizes. High-purity stainless steels
www.swagelok.com Metal asket ace Seal ittings /6 to and 6 to 8 mm sizes igh-purity stainless steels The original design, the authentic brand 2 Metal asket ace Seal ittings ontents lands Page 4 odies Page
More informationInstrumentation Thread Fittings
www.superlok.com INDEX ICN 4P IRHB 6P IRSE 8P Close Nipple Reducing Hex Bushing Reducing Street Elbow IHC 6P IME 8P Hex Coupling Male Elbow IHN 4P Hex Nipple IHRC 6P IFT 8P Hex Reducing Coupling Female
More informationCopper-Nickel Alloy for Seawater Piping Systems (CuNi 90/10)
Offshore OSNA -10 Copper-Nickel Alloy for Seawater Piping Systems (CuNi 90/10) KME Germany GmbH & Co. KG Offshore OSNA -10 [GB] Content KME - The Company 1 The Material 2 Offshore Product Range 3 Pipes
More informationD-Pro Check Valves. SS316: 2000 psig (137 bar) Brass: 1500 psig (103 bar)
DPro V, VP, VA, V6 and V6 Series Fixed and Adjustable cracking pressure Pressures up to (6 ) and 6 (4 ) Catalog No V66. May 8 Features Fixed and adjustable cracking pressure. Reliable DKOK Tube Fitting,
More informationD-Pro Check Valves. SS316: 2000 psig (137 bar) Brass: 1500 psig (103 bar)
Features DPro Check Valves V, VP, VA, VH6 and V6 Series VCH6 Series CNG check valves Fixed and Adjustable cracking pressure Pressures up to (6 ) and 6 ( ) Catalog No V6 March 9 Fixed and adjustable cracking
More informationPipe, Weld, and Adapter Fittings
ipe, Weld, and dapter Fittings & 10K Instrumentation Fittings 1/16 to 2 in. sizes NT, B, and threads Tube and ipe ocket and Butt Weld, lloy 400, lloy C-276, carbon steel, and brass N 37 Flared www.myusa.com
More informationGaugeable Tube Fittings and Adapter Fittings
www.swagelok.com Gaugeable ittings and dapter ittings vailable in tube sizes from / to 2 in. and 2 to 50 mm Consistent gaugeability upon initial make-up asy to disconnect and retighten Wide variety of
More informationTUBE FITTINGS INSTRUMENTATION.
TUBE FITTINGS INSTRUMENTATION www.unilok.com We, Uni-Lok corporation, have distinguished ourselves in the design and manufacturing of a high performance Twin Ferrule Compression Fittings and Instrumentation
More informationTUBE FITTINGS INSTRUMENTATION.
TUBE FITTINGS INSTRUMENTATION www.unilok.com We, Uni-Lok corporation, have distinguished ourselves in the design and manufacturing of a high performance Twin Ferrule Compression and Instrumentation Valves
More informationHIGH PRESSURE BAR STOCK BALL VALVES. VB6B Series.
HIGH PRESSURE BAR STOCK BA VAVES VB6B Series www.unilok.com s - VB6B Series Features Pressure rating up to 6000psig (413bar) @21 (70 ) with standard PTFE seats 10000psig (689bar) @21 (70 ) with optional
More informationO-Rings. Back pressure may be required to reseal the valves with nominal cracking pressure of 5psi or lower.
Check Valves SPCV Series Features Fixed cracking pressure. Pressure rating up to 3000 psig @70 (21 ) Temperature rating up to 375 (191 ) with Viton O-Ring. Variety of end connections available. Every valve
More informationGaugeable Alloy 400 Mechanically Attached Pipe and Tube Fittings
www.swagelok.com Gaugeable Alloy 400 Mechanically Attached and Fittings For use with MIL-T-16420K 70/30 and 90/10 copper-nickel tubing and pipe Excellent corrosion resistance in chloride-containing environments
More informationV33, VP33, VA33, VDA33, VH36 and VL36 Series VCH36 Series for CNG/NGV applications Pressures up to 3000 psig (206 bar) and 6000 psig (413 bar)
V, VP, VA, VDA, VH6 and VL6 Series VCH6 Series for CNG/NGV applications Pressures up to g (26 ) and 6 g (4 ) Catalog No. V6 December 2 Features Fixed cracking pressure valves: V, VP, VH6, VCH6 Series Adjustable
More informationIntroduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas productio
Check Valves (C Series) Catalog 4130-C Revised, July 2004 Introduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas production
More informationPneufit Inch Series Push-In Tube Fittings 1/8" to 1/2" Tube Sizes UNF to 1/2" NPT Thread Options
Section 1 Pneufit Inch Series Push-In Tube Fittings to 1/2" Tube Sizes 10-32 UNF to 1/2" NPT Thread Options Inch Series Product Numbering System..................FIT-1-2 Inch Series Shapes and odes.........................fit-1-3
More informationEstablished in 1982, Modentic Industrial Corporation is involved in the world of stainless steel valves & fittings selling.
Modentic Industrial Corp. ISO 9001 Certified. Established in 1982, Modentic Industrial Corporation is involved in the world of stainless steel valves & fittings selling. Contents A view of valve process
More informationCheck Valves (C Series) Catalog 4130-C Revised, July 2004
Check Valves (C Series) Catalog 4130-C Revised, July 2004 Introduction Parker C Series Check Valves are designed for uni-directional flow control of fluids and gases in industries such as chemical processing,
More informationUltra Proline. ECTFE (Halar ) Single Wall Piping System
ECTFE ( ) Single Wall Piping System 222 - Specification Natural Ethylene Chlorotrifluoroethylene (ECTFE) Chemical Piping System REV:IN0512HA Materials: ASTM D3275 Class 2 resin. Raw resins are certified
More informationSolution Partner. Leak - Proof Flow & Control. Check & Relief Valves. W e. s u p p o r t. t h e. i n n o v a t i o n s. o f.
W e. s u p p o r t. t h e i n n o v a t i o n s. o f. c u s t o m e r s eak - Proof Flow & Control The Best Partner for Value Creation Solution Partner Check & Relief Valves Index Check & Relief Valves
More informationCheck valve series. SHCV, SOCV, SOACV, SACV Series. Phone: Fax: Wimbledon Rd.
Check valve series SHCV, SOCV, SOACV, SACV HIGH PRESSURE CHECK VALVES SHCV SERIES Features Pressure rating up to 6,000psig(413bar) at 70 (20 ) Temperature rating up to 375 (190 ) with viton seal standard
More informationSS316: 2000 psig (137 bar) Brass: 1500 psig (103 bar)
V, VP, VA, VH6 and V6 Series VCH6 Series for CNG/NGV applications Fixed and Adjustable cracking pressure Pressures up to (26 ) and 6 ( ) Catalog No. V67 March 2 Fixed and adjustable cracking pressure.
More informationRL4 Series Relief Valve Introduction Parker RL4 Relief Valves are designed such that when the upstream pressure exceeds the closing force exerted by t
Relief Valves (RL4 Series) Catalog 411-RL Revised, July 2001 RL4 Series Relief Valve Introduction Parker RL4 Relief Valves are designed such that when the upstream pressure exceeds the closing force exerted
More informationRelief Valves. Catalog 4131-RL Revised, April 2005
Relief Valves (RL4 Series) Catalog 4131-RL Revised, April 2005 RL4 Series Relief Valve Catalog 4131-RL RL4 Series Relief Valve Introduction Parker RL4 Relief Valves are designed such that when the upstream
More informationINSTRUMENTATION ULTRA HIGH PURITY FITTINGS & VALVES
INSTRUMENTATION ULTRA HIGH PURITY FITTINGS & VALVES www.unilok.com Since 1984 INSTRUMENTATION Application VB1 series General Ball Valve MWP : 1000psig/69bar with PTFE seats, 2000psig/137bar with TFM seats
More informationLow-pressure valves have blue handle as standard. High-pressure vlaves have white handle as standard.
Suitable for Ultra High-Purity Applications 316L Stainless Steel, 316L Stainless Steel VAR Body Low-Pressure and High-Pressure Models Metal Seal, Tube Butt Weld, Lok End Connections Manual or Pneumatic
More informationVN Series Needle Valves
VN Series Needle Valves VN5, VN6, and VNS6 Series Regulating and Shut-Off Applications Catalog No. VN-2 January 2015 VN5 Series Integral-Bonnet Needle Valves VN6 Series Bar-Stock Needle Valves VNS6 & VNS10
More informationRelief Valves (RL4 Series) Catalog 4131-RL Revised, April 2005
Relief Valves (RL4 Series) Catalog 4131-RL Revised, April 2005 RL4 Series Relief Valve Catalog 4131-RL RL4 Series Relief Valve Introduction Parker RL4 Relief Valves are designed such that when the upstream
More informationInstrument Manifolds. V, VB, and VL Series. 2-, 3-, and 5-valve instrument manifolds
www.swagelok.com Manifolds V, VB, and VL Series 2-, 3-, and 5- instrument manifolds All 316 stainless steel construction with PTFE packing Working pressures up to 6000 psig (413 bar) Temperatures up to
More informationSeries VC Pneumatic cylinder actuators
Series VC Pneumatic cylinder actuators Metso`s Neles series VC actuators are exclusively developed for linear valves. The VC double acting cylinder type actuators are designed for use in both modulating
More informationOne-Piece Ball Valves. VB2GB, VB23GB Series
One-Piece Ball Valves VB2 & VB2G Series 1/8 to 1/2 in. (3 to 12 mm OD) Up to 3000 psig (206 bar) Stainless Steel, Brass Catalog No. VB2-2 Aug. 2015 Features Directional Handle indicates flow direction.
More informationHigh Pressure Equipment High Pressure Valves, Fittings and Tubing
igh quipment igh Valves, ittings and Tubing 0,000, 40,000 and psi service igh quipment Company has developed a line of igh products to assure safe and easy plumbing for 0,000, 40,000 and psi. These needle
More informationForged Steel Fittings CLASS 3000 THREADED
Forged Steel Fittings CLASS 3000 THREADED NPS 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4 DN 6 8 10 15 20 25 32 40 50 65 80 100 90 0 ELBOWS A in 0.97* 0.97 1.12 1.31 1.50 1.75 2.00 2.38 2.50 3.25 3.75
More informationDirect Mount Packages
800.783.7836 Direct Mount Packages BEV9 Actuated package Size range: 1/ - Pressure rated for 1000 WOG 316 Stainless steel construction Live loaded stem seal design Full Port Threaded Ends (F) EZ99 Actuated
More informationT-TYPE & IN-LINE FILTERS
T-TYPE & IN-LINE H-600R, H-600R CNG & H-600 SERIES H-600R FEATURES Bar Stock 316 St.St. or Brass Construction On-line Maintenance High-Pressure Characteristics 6000 psi (413 bar) in 316St.St. and 2000
More informationApplicable tube O.D. ø3.2, ø4, ø6 Thread M3, M5, R(PT) 1/8 Series KJ. Applicable Tubing. Tube materterial Tube O.D. Specifications
iniature One-touch Fittings One-touch ini pplicable tube O.D. ø, ø, ø,, R(P) 1/ Series KJ Guide 1 Guide Chuck ccepts nylon and polyurethane tubes. as large retaining force. Release button (ight gray) Small
More informationSection 7. Socket Weld and Threaded Fittings. Socket Weld and Threaded Fittings 7-1
Section 7 Socket Weld and Threaded Fittings This Section contains dimension and tolerance information extracted from American and British specifications applicable to socket weld and threaded fittings.
More informationInstrument Pipe & ISO Conversion Fittings. Catalog 4260 Revised, February 1999
Instrument Pipe & ISO Conversion ittings Catalog 4260 Revised, ebruary 1999 Instrument Pipe ittings Instrument Pipe ittings Introduction Parker Instrumentation Pipe ittings are designed as leakfree connections
More informationForged steel socket Welding fittings 6 ~ 13. Forged steel threaded fittings 14 ~ 20. Forged steel outlet fittings 21 ~ 23
Forged steel socket Welding fittings 6 ~ 13 Forged steel threaded fittings 14 ~ 20 Forged steel outlet fittings 21 ~ 23 Standard threads specifications 24 ~ 25 Comparison of astm specifications and similar
More informationForged Fittings. High Technology Valve & Fitting Series
Forged Fittings High Technology Valve & Fitting Series Forged steel socket Welding fittings 6 ~ 13 Forged steel threaded fittings 14 ~ 20 Forged steel outlet fittings 21 ~ 23 Standard threads specifications
More informationMiniature Fittings Stainless Steel 316. Hose nipple. Barb Configuration for easy insertion into the tube Holds the tube tightly.
Miniature Fittings Stainless Steel 316 Series MS Applicable Tubes: ø3.2, ø4, ø6 Connection Thread:, R 1/ For use in corrosive environments Compact piping space Tube has a large retaining force. Hose nipple
More informationYl)HAl STrrl (INDIA) Forged High Pressure Pipe Fittings. All ISO 9001:2003/ ISO 14001:2004 / 8S Ol!SAS 18001:2007 / PED Al'PROl'ED 97/23/EC
Forged High Pressure Pipe Fittings Forged High Pressure Pipe Fittings Summary : Summary : Type 1. Elbow, Tee, Cross, Couplin g, Half Coupling, Cap, Plug, Bushing, Union, HEX. Nipple, Swage 2. nipple, Bull
More informationForged High Pressure Pipe Fittings
Forged High Pressure Pipe Fittings Forged High Pressure Pipe Fittings Pressure Class Socket Weld Forged Fittings Products Dimension Specifications Pressure Class Threaded Forged Fittings Products Dimension
More informationspecification DAtA V R0 pilot operated tank blanket VAlVe, pressure regulating VAlVe SERIES V500
specification DAtA V500-2016-R0 pilot operated tank blanket VAlVe, pressure regulating VAlVe SERIES V500 Series V500 PILOT OPERATED TANK BLANKET VALVE, PRESSURE REGULATING VALVE contents Application, Features,
More informationCheck Valves, Filters and Relief Valves
Check Valves, Filters and Relief Valves Catalog 4135-CV December 2010 Series Relief Valves Catalog 4135-CV Introduction Parker Relief Valves are designed such that when the upstream pressure exceeds the
More informationFully Welded Ball Valves
Ball Valves Ball Valves FULLY WELDED type ball valves are cut off devices suitables for use both on natural gas distribution network and for liquid service when high performance on thightness and low pressure
More informationSEAMLESS & WELDED PIPE
SEAMLESS & WELDED PIPE SPECIFICATIONS: LENGTHS: ASTM A312M-08 6.1 METRE/RANDOMS FINISH: WELDED ANNEALED & PICKLED SEAMLESS COLD FINISH/HOT FINISH NB PIPE SIZE SIZE WELDED SEAMLESS APPROX. WGT Inch mm O.D.
More informationPiping Material Specification - Piping class : CS101
Piping Material Specification - Piping class : CS101 SERVICE PROCESS (NG) BASIC MATERIAL CARBON STEEL RATING CLASS 150#, ASME B 16.5 DESIGN CODE ASME B 31.3 DESIGN TEMPERATURE NOMINAL CORROSION ALLOWANCE
More informationCopper-Nickel Seawater Piping Systems Offshore product range: Pipes, fittings and flanges of OSNA 10
Copper-Nickel Seawater Piping Systems Offshore product range: Pipes, fittings and flanges of OSNA 10 KME Germany AG & Co. KG OSNA 10 [GB] Member of the KME Group Contents Your Partner KME The Material
More informationHIGH PRESSURE FORGED MULTI PURPOSE BALL VALVES. VB6F Series.
HIGH PRESSURE FORGED MULTI PURPOSE BALL VALVES VB6F Series www.unilok.com Features Pressure rating up to 6000psig (413bar) @21 (70 ) with standard PCTFE seats Temperature rating from -54 (-65 ) to 177
More informationAn Installer s Pocket Guide for Swagelok Tube Fittings
www.swagelok.com An Installer s Pocket Guide for Swagelok Fittings 2 CONTENTS Intermixing/Interchanging... 8 Metric Swagelok Fittings... 8 Installation Instructions Safety Precautions... 9 Up to /25 mm
More informationRotary Plug Valves (PR Series) Catalog 4126-PR Revised, July 2003
Rotary Plug Valves (PR Series) Catalog 4126-PR Revised, July 2003 PR Series Rotary Plug Valves Introduction Parker PR Series Plug Valves provide positive leak tight shut-off, high flow capacity, and quick
More informationCompression Style Transportation
Compression Style Transportation Air Brake Fittings eets.o.t. FVSS 571.106 eets SAE J246 & J1131 Reusable Use with Copper Tubing TA Fittings eets.o.t. FVSS 571.106 eets SAE J246 & J1131 Staked in Tube
More informationGaugeable Tube Fittings and Adapter Fittings
www.swagelok.com Gaugeable Fittings and dapter Fittings vailable in tube sizes from / to 2 and 2 to 50 mm Consistent gaugeability upon initial installation asy to disconnect and retighten Wide variety
More informationGaugeable Tube Fittings and Adapter Fittings
www.swagelok.com Gaugeable Fittings and dapter Fittings vailable in tube sizes from / to 2 and 2 to 50 mm Consistent gaugeability upon initial installation asy to disconnect and retighten Wide variety
More informationFittings, Materials and Tubing Guide. Instrumentation Products
Fittings, Materials and Tubing Guide Fittings, Materials and Tubing Guide Instrumentation Products ISO onversion Fittings Visual Index ISO Fitting Nomenclature page 122 Typical Fastening s page 123 Forms
More informationINSTRUMENTATION METERING VALVES. VMT Series.
INSTRUMENTATION METERING VALVES VMT Series www.unilok.com Features Pressure rating up to VMTS series - 2000psig (137bar) VMTL & VMTM series - 1000psig (69bar) Temperature rating from -23 C(-10 F) to 204
More informationProduct Catalog. Fittings ½ AIR PIPE FITTINGS Fitting, 1/2 Air Pipe End Cap Coupler, with Tank Valve
To complement our extensive line of cable pressurization products, System Studies also sells a variety of air pipe and pressure tube fittings. This section of the catalog describes these commonly used
More informationWWW.MAKO-RODUCTS.NET 03 07 10 19 Diaphragm Valve 12 DV1 Series 13 DV1 Series 14 BDV1 Series 15 BDV1 Series 16 HDV1 Series Bellows Valve 17 BV1 Series 18 BV1 Series 19 BV2 Series 20 BV2 Series 21 BV3 Series
More informationSwing - Out Ball Valves. High Technology Valve & Fitting Series
Swing - Out Ball Valves High Technology Valve & Fitting SWB 30 SERIES SPECIFICATION Pressure Rating up to 000 psig (69 bar) at 00 (37 ) Temperature Range from -0 (-8 ) to 50 (3 ) TESTING Each valve is
More informationcontents MALLEABLE PIPE FITTINGS BUsHEs NiPPlEs PlUgs caps BENds BackNUTs UNioNs TEEs 171 cross PN25 p socket PN25 p socket PN25 p.
contents BUsHEs 140 Hexagon Bush p.5 NiPPlEs 144 octagon Nipple p.6 145 Hexagon Nipple p.6 PlUgs 146 Beaded Plug - solid p.7 147 Plain Plug - Hollow p.7 148 Plain Plug - solid p.7 149 countersunk Plug
More informationProcess Cooling Water. PCW Ball Valves
Process Cooling Water PCW s PCW Process Cooling Water (PCW) s PCW Applications Process Cooling Water (PCW), City Water, Potable Water Product Description Size Range: NPS 1/2 to NPS 6 Temperature Range:
More informationQuick Connectors DQ, DQM, and DF Series
Q, QM, and F Catalog No. QF-5 January 2012 No tools required to couple and uncouple. Bi-directional flow design. Versatile options of bot-end sutoff (V), single-end sutoff (SV), and bot end open (F ).
More informationSteel Conduits Conduit Fittings Flexible Conduits
Conduits Conduit Fittings Flexible Conduits CONTENT 1. INTRODUCTION VOLTECX products introduction and selecting VOLTECX 2. STEEL CONDUITS VOLTECX BS4568: Part 1: 1970 (Class 4) Conduit IEC 61386-21:2004;
More informationIY-LOK KOREA Always Together, Always Success since 1993 Products Qualified on UAE BNPP Nuclear Power Plant
www.ihsungtech.co.kr IY-LOK KOREA Always Together, Always Success since 1993 Products Qualified on UAE BNPP Nuclear Power Plant Lead the Innovation, Since 1993 Always Together, Always Success Company Profile
More informationHand Expansion Valves Built Stronger to Last Longer Sizes: 6mm (¼ ) to 305mm (4 )
Hand Expansion Valves Built Stronger to Last Longer Sizes: 6mm (¼ ) to 305mm (4 ) Bulletin No. 82-00A Suitable For: Ammonia, Fluorocarbons, Nitrogen and Carbon Dioxide Features ASTM 352 LCB Cast Steel
More informationSolution Partner. Leak - Proof Flow & Control. Check & Relief Valves. W e. s u p p o r t. t h e. i n n o v a t i o n s. o f.
W e. s u p p o r t. t h e i n n o v a t i o n s. o f. c u s t o m e r s Leak - Proof Flow & Control The Best Partner for Value Creation Solution Partner Check & Relief Valves 2 Check & Relief Valves Index
More informationCheck Valves, Filters and Relief Valves
Check Valves, Filters and Relief Valves Catalog 4135-CV December 2010 Series Check Valves Catalog 4135-CV Introduction Parker Series Check Valves are designed for uni-directional flow control of fluids
More informationInstrument Manifolds. High Technology Valve & Fitting Series
Instrument Manifolds High Technology Valve & Fitting Series Instrument Manifolds SmallBonnet Valve (Orifice3.2) LargeBonnet Valve (Orifice6.4) Stainless steel Bar handle Packing bolt permits stem packing
More informationINSTRUMENTATION UNION BONNET VALVES. VU6 Series.
INSTRUMENTATION UNION BONNET VALVES VU6 Series www.unilok.com Features Pressure rating up to 6000psig (413bar) @38 (100 ) Temperature rating from -53 (-65 ) to 232 (450 ) with standard PTFE packing, up
More informationForged steel socket Welding fittings 6 ~ 13. Forged steel threaded fittings 14 ~ 20. Forged steel outlet fittings 21 ~ 23
Forged steel socket Welding fittings 6 ~ 13 Forged steel threaded fittings 14 ~ 20 Forged steel outlet fittings 21 ~ 23 Standard threads specifications 24 ~ 25 Comparison of astm specifications and similar
More informationFull Traceability. Material Specification. Raw Material Code. Heat Treatment
All J.B. Smith swages, bull plugs, tubing and casing nipples, and chambers are traceable to the original mill test report. To ensure traceability, all fittings are steel stamped as follows: Material Specification
More informationSwagelok Alternative Fuel Ser vice (AFS) Ball Valves
www.swagelok.com Swagelok Alternative Fuel Ser vice (AFS) Ball Valves For High-Pressure, High-Flow Applications Swagelok AFS Ball Valves Working pressures up to 6000 psig (413 bar) Flow coefficients (C
More informationSTC Manual & Actuated Process Valves
STC Manual & Actuated Process Valves Fine Quality Precision Engineered Excellent Prices Advanced Design connects fluid power to industrial automation Table of Contents STC Valve Numbering System.......2
More informationSwagelok Medium-Pressure, Gaugeable Tube Fit tings and Adapte r Fit tings
www.swagelok.com Swagelok Medium-Pressure, Gaugeable Fit tings and dapte r Fit tings For Pre s sure s up to 15 0 0 0 psig (1034 ba r) asy installation, no special tools required ssembly by one full turn
More informationTrunnion Ball Valves
Ball Valves Ball Valves TRUNNION type ball valves are cut off devices suitables for use both on natural gas distribution network and for liquid service when high performance on thightness and low pressure
More informationTHREE-PIECE BALL VALVES H-500 SERIES
THREE-PIECE BALL VALVES H-500 SERIES H-500 FEATURES 3-piece heavy-duty ball valves with: Precision Investment cast body in CF8M stainless steel Precision Investment cast end caps in CF3M stainless steel
More informationGROUND JOINT FITTINGS
GROUND JOINT FITTINGS Ground joint fittings are for heavy-duty applications such as steam, air supply for construction, roadbuilding, and drilling applications. The coarse threads make G29 couplings easy
More informationStainless One-touch Fittings. Applicable Tubing Tube material Tube O.D. Thread Nut
Stainless One-touch Fittings Series KG Guide Collet Chuck Accepts nylon, soft nylon and polyurethane tubes. as large retaining force. Chuck certainly bites tube and collet increases retaining force. Release
More information