FITOK Group FITOK GmbH (Headquarter) Sprendlinger Landstr. 115, Offenbach am Main, Germany Tel.: Fax:

Transcription

1 FITOK Concised Product Catalog FITOK Group FITOK GmbH (Headquarter) Sprendlinger Landstr. 5, 09 Offenbach am Main, Germany Tel.: Fax: Distributed by: FITOK, Inc. North Promenade Blvd., Suite 750, Stafford, Texas 7777, USA Tel.: Fax: FITOK Incorporated -F, Block C, Zone E, Yingtailong lndustrial Park, Dalang Street, Longhua District, Shenzhen, 59, China Tel.: Fax: FITOK Middle East Oil Equipment Trading LLC 0-09, Makateb Tower, Airport Road, P.O.Box 5, Deira, Dubai, UAE Tel.: Fax: info@fitokgroup.com FK-CC-0-EN-5

2 Contents General Instrumentation Valves and s Medium & High Pressure Valves and s s Tube s o 7 Flared Tube s Pipe s Weld s Calibration Hoses and s 5 High Pressure s 5 Tube s 0 Tube s 7 0 Tube s Pipe s 90 Adapters and Couplings 9 VL Vacuum Tube s VA Vacuum Adapter s 9 0 High Pressure Valves Needle Valves Ball Valves Check Valves 9 Valves Ball Valves Bleed Valves 5 Metering Valves 5 Relief Valves Check Valves Excess Flow Valves Purge Valves 9 0 Line Filters Relief Valves Bellows-sealed Valves Metering Valves Needle Valves Plug Valves Two-Piece Forged Metal-Seated Ball Valves Globe Valves Medium & High Pressure Tubings Tools Semiconductor & Specialty Gas Applications Manifolds Air Headers and Distribution Manifolds Block and Bleed Valves Gauge Valves Instrumentation Manifolds s Butt Weld s Metal Gasket Face Seal s O-ring Face Seal s L-ring Face Seal s 5 9 Filters Valves Diaphragm Valves Pressure Reducing Regulator Back Pressure Regulator 7 Hoses and Connectors 7 Quick-connects Changeover System 7 Condensate Pots and Vessels 75 Sample Cylinders and Accessories Closed-loop Sampling System 77 Tubing Tools 79 Other Elements

3 s / Tube s Tube s Configuration Type Example Positionable Male Elbow TI-LP-ML-ST Female Elbow PA-LF-FL-NS s / Tube Union Elbow INC-LU-FL Male Run Tee A0-TMT-FL-NS Male Branch Tee D5-TTM-ML-NS Sizes range from /" to " and mm to 50 mm. Diverse materials and configurations are available. Precision machined components ensure perfect deformation of the ferrules and tubing. Hardened threads and smoothed surface finishes extend fitting life and prevent sticking of the matching threads. Female nut threads are silver-plated to minimize the friction with body threads. Radius junction design within elbows provides smooth flow path. Every fitting is stamped with size, material, and heat code. s are easy to disconnect and retighten. Positionable Male Run Tee Positionable Male Branch Tee AL-TPT-FL-ST A5-TTP-FL-PP Configuration Type Example Male Connector -CM-ML-NS Female Run Tee -TFT-FL-NS Bulkhead Male Connector S-BCM-FL-AN Female Branch Tee -TTF-ML-NS Thermocouple Connector S-TCM-FL-NS Union Tee -TTT-FL Female Connector B-CF-FL-RG Bulkhead Female Connector CS-BCF-ML-NS Union Cross -C-FL Union M-U-FL Cap -TC-FL Bulkhead Union HC-BU-ML Plug -TP-ML Male Elbow T-LM-FL-NS Nut+Ferrules -NFR-FL

4 s / Tube Configuration Type Example over 5mm over 5mm over 5mm Reducer Insert for Soft Plastic Tubing Port Connector Male Adapter Female Adapter Flange Adapter Weld Connector Weld Elbow Lapped Flange Connector Calibration Dielectric Nut-Ferrule Set Ferrule Set o 5 Male Elbow o 5 Adjustable Male Elbow Protector Fusible s -R-FL-MT -IN-- -P-FL -AM-FT-RT -AF-MT-NS -FA-FL-F-00 -CW-FL-TS -LW-FL-PB -LFC-FLA -FC-FL- -DF-FL -GFTA-- - CM - ML - NS Cleaning and Packaging and P Type P Type P Size P Type P Size P FC-0 Specify in the same way as the P Except the same as the P, the other size follows: Except the same as the P, the other type follows: /" Metric Ferrule ML Male Connector CM /" or mm Bulkhead Male Connector BCM F FC-0 M5 x 0. or 5/- 5 NPT Thread NS " or mm / Fractional Ferrule FL Thermocouple Connector TCM 0 S M x or /- O-ring with NPT Thread ONS " or mm / MT Female Connector CF S 7/-0 7 ISO Tapered Thread RT 5/" 5 M x or /-0 FT Bulkhead Female Connector BCF ISO Parallel Thread RS " or mm / 90L 90L Union U 9/- 9 ISO Parallel Thread RP /" or mm Bulkhead Union BU Titanium TI M x 5/" or mm M x.5 or /- ISO Parallel Thread (Gauge) RG Male Elbow LM Duplex 05 D5 /" or mm M x.5 or 7/- ISO Parallel Thread (Japanese Gauge) o 5 Male Elbow VM RJ 7/" or mm M x.5 o 5 Adjustable Male Elbow Duplex 507 VP D7 5 mm 5 /- 7 Positionable, ISO Parallel Thread PP Positionable Male Elbow LP Alloy 0 A0 " or mm M x.5 SAE / MS Straight Thread ST Female Elbow LF " or mm / /- 9 O-ring with SAE/MS Straight Thread Alloy 00 M OST Union Elbow LU /" or 0 mm 0 M0 x.5 0 o 7 Flare AN Bulkhead Union Elbows BBLU Alloy 00 INC 5/- mm Male Metric Thread MS Male Run Tee TMT P M x.5 /" or mm Alloy 5 A5 Socket Weld TS Male Branch Tee TTM M x.5 5 mm 5 Positionable Male Run Tee TPT Alloy C-7 Pipe Butt Weld PB HC P P 5/- mm Positionable Male Branch Tee TTP M7 x 7 0 mm 0 Carbon Steel CS Female Run Tee TFT 7/- 0 " or mm P Female Branch Tee TTF Aluminum AL mm Union Tee TTT 50 mm 50 Brass B P, P, P and P shall be described in the following orders: Union Cross C Ferrule - Tube - NPT Thread - ISO Tapered Thread - ISO Parallel Thread - Cap TC Nylon PA o SAE/MS Straight Thread - 7 Flare - Pipe Butt Weld - Socket Weld - Others Plug TP PTFE T Reducer R Describe in descending order as per size if the end connection types are the same Port Connector P Describe the end of P if all end connections are the same Male Adapter AM Cleaning and Packaging: FC-0: Standard cleaning and packaging for general industrial procedures FC-0: Special cleaning and packaging for wetted system components to ensure compliance with product cleanliness requirement as stated in ASTM G9 Level C Note: "" is used for composition rules of FITOK product model, Not suitable for Female Adapter AF Weld Connector CW specific product part number selection, not random combinations. If in doubt, please contact FITOK group or authorized agent. Weld Elbow LW Dielectric DF s / Tube

5 5 o s / 7 Flared o 7 Flared Tube s Configuration Type Male Elbow Positionable Male Elbow Example -LM-AN-NS -LP-AN-ST o s / 7 Flared o 5 Male Elbow -VM-AN-NS s are designed and manufactured in compliance with SAE J5. Sizes range from /" to " and mm to 50 mm. stainless steel, aluminum, brass, and carbon steel materials are available. Hardened threads and smoothed surface finishes extend fitting life and prevent sticking of the matching threads. Radius junction design within elbows provides smooth flow path. Every fitting is stamped with size, material and heat code. Female nut threads are silver-plated to minimize the friction with body threads. s are easy to disconnect and retighten. Female Elbow Union Elbow -LF-AN-NS -LU-AN Configuration Type Example Sleeve -SL-AN Male Branch Tee -TTM-AN-NS Nut AL-N-AN Male Run Tee -TMT-AN-RT Male Connector B-CM-AN-NS Female Connector CS-CF-AN-RT Female Branch Tee -TTF-AN-RT Union -U-AN Female Run Tee -TFT-AN-NS Reducing Adapter -RA-AN-AN Bulkhead Union -BU-AN Union Tee -TTT-AN Tube Plug -TP-AN Union Cross -C-AN Tube Cap -TC-AN

6 7 Pipe s o s / 7 Flared - - CM - AN - NS - P and P Type P Type P Size P Type P Size Specify in the same way as the P Except the same as the P, the other size follows : Except the same as the P, the other type follows : /" o 7 Flare AN Sleeve SL /" or mm Nut N 5/- 5 NPT Thread NS o 7 Flare Swivel AS Aluminum AL /" or mm Male Connector CM /- ISO Tapered Thread RT /" or mm Female Connector CF Brass B 7/-0 7 SAE/MS Straight Thread ST 5/" 5 /-0 Union U Carbon Steel CS /" or mm 9/- 9 Large Hex Union HU /" or mm /- 5/" or mm RA Reducing Adapter 7/- /" or mm Bulkhead Union BU /- 7 7/" or mm Plug TP /- 9 5 mm 5 Cap TC 5/- " or mm 5/- Male Elbow LM 7/- 0 /" or mm 5 o Male Elbow VM /- 0 /" or 0 mm 0 Positionable Male Elbow LP mm Female Elbow LF /" or mm Union Elbow LU 5 mm 5 Male Run Tee TMT mm Note: "" is used for composition rules of FITOK product model, Not suitable for specific product part number selection, not random combinations. If in doubt, please contact " or mm Male Branch Tee TTM mm Female Run Tee TFT group or authorized agent. FITOK 50 mm 50 Female Branch Tee TTF Positionable Male Branch Tee TTP P Union Tee TTT P,P,P and P shall be described in the following orders: o o 7 Flare - 7 Flare Swivel - NPT Thread - ISO Tapered Thread - SAE/MS Straight Thread - Others Describe in descending order as per size if the end connection types are the same Describe the end of P if all end connections are the same Union Cross C P P P Sizes range from / to. s include stainless steel, alloy 00, alloy 00, brass, and carbon steel. End connections with NPT, ISO/BSP, SAE, and metric threads are available. Hardened threads and smoothed surface finishes extend fitting life and prevent sticking of the matching threads. Radius junction design within elbows provides smooth flow path. Every fitting is stamped with size, materia, and heat code. Configuration Type Example Pipe Plug Hollow Hex Plug Close Nipple -PP-MRS S--NS S-PCN-RT Special Pipe Nipple Hex Nipple Hex Long Nipple Reducing Bushing M-PSN-NS-50. INC-PHN-NS-RP B-PLN-NS-7. CS-PRB-NS-RT Pipe Cap Hex Coupling -PC-NS -PCG-NS-NS Union Ball Joint -UBJ-NS s / Pipe

7 9 s / Pipe Configuration Type Adapter Male Elbow Street Elbow o 5 Street Elbow Female Elbow o 5 Female Elbow Male Tee Female Branch Tee Female Run Tee Male Street Tee Male Branch Tee Female Tee Female Cross Pipe to Pipe Union Hand Tight Adapter Fusible s Example -PA-NS-ST -PME-NS -PSE-RT-RT -PSV-NS-NS -PE-NS -PVE-NS -PMT-NS -PTB-NS -PTR-RT -PST-NS -PBT-NS -PT-RT -PCR-NS -PUP-MS0-NS -HF-MS0-FMS0 -GFPP-- - PSE - NS - NS S - Cleaning and Packaging Special Application and P Type P Type P Size P, P FC-0 NO NPT Thread Pipe Plug ISO Tapered Thread Hollow Hex Plug F FC-0 S NACE MR075 Specify in the same way as the P /" NS PP /" RT ISO Parallel Thread (Gauge) 0 S 5/- 5 RG Close Nipple PCN Classification for Nuclear Facility Application / " or /- ISO Parallel Thread Special Pipe Nipple PSN S BP 7/-0 7 ISO Parallel Thread RS Hex Nipple PHN Alloy 00 M / or M x " N Class Male Metric Thread MRS Hex Long Nipple PLN 9/- 9 Alloy 00 INC Class N Male Metric Thread MS Reducing Bushing M x PRB Alloy C-7 HC / " or M x.5 or /- Male SAE/MS Straight Thread ST Pipe Cap PC Female SAE/MS Straight Thread Hex Coupling PCG Brass B M x.5 or 7/- P US "or M x.5 Union Ball Joints UBJ Carbon Steel CS /- 7 Adapter PA 90L 90L P P M x.5 Male Elbow PME /- 9 Street Elbow PSE P / "or M0 x o Street Elbow PSV 5/- P, P, P and P shall be described in the following orders: Female Elbow PE M x.5 NPT Thread - ISO Tapered Thread - ISO Parallel Thread - SAE/MS Straight Thread - Metric Thread - Others / or M X.5 " 5 o Female Elbow PVE 5/- Male Tee PMT Male after female but the "PRB" and the "HF" types are not included M7 x 7 Female Branch Tee PTB 0 7/- or M0 x Female Run Tee PTR Describe in descending order as per size if the end connection types are the same " Male Street Tee PST Describe the end of P if all end connections are the same Male Branch Tee PBT Female Tee PT Cleaning and Packaging: FC-0: Standard cleaning and packaging for general industrial procedures FC-0: Special cleaning and packaging for wetted system components to ensure compliance with product cleanliness requirement as stated in ASTM G9 Level C Note: "" is used for composition rules of FITOK product model, Not suitable for Female Cross PCR Pipe to Pipe Union PUP specific product part number selection, not random combinations. If in doubt, please contact FITOK group or authorized agent. Hand Tight Adapter HF s / Pipe

8 s / Weld Weld s Configuration Type Tube Socket Weld Union Tube Socket Weld Reducing Union Example -WU-TS -WU-TS-TS s / Weld Tube Socket Weld Union Elbow -WLU-MTS Sizes range from /" to " and mm to mm. stainless steel material is standard; other materials are available on request. Radius junction design within elbows provides smooth flow path. o Maximum working temperature is 00 F (5 o. Every fitting is stamped with size, material, and heat code. o Tube Socket Weld Union 5 Elbow Tube Socket Weld Union Tee -WV-TS -WT-MTS Configuration Type Example Tube Butt Weld Male Connector -WM-TB-NS Tube Socket Weld Union Cross -WC-TS Tube Butt Weld Female Connector -WF-MTB-NS Tube Butt Weld Reducing Union -WU-MTB0-MTB Pipe Butt Weld Male Connector -WM-PB-NS Pipe Butt Weld Female Connector -WF-PB-NS Tube Butt Weld Union Elbow -WLU-TB Pipe Socket Weld Male Connector -WM-PS-NS Tube Butt Weld Union Tee -WT-MTB Pipe Socket Weld Female Connector -WF-PS-NS Tube Butt Weld Union Cross -WC-MTB Pipe Socket Weld Union -WU-PS Tube Socket Weld Male Connector -WM-TS-NS Tube to Tube Weld Adapter -WA-TB-TS Tube Socket Weld Female Connector -WF-MTS-NS Pipe to Tube Weld Adapter -WA-PB-TS Tube Socket Weld Male Elbow -WLM-TS-NS Pipe to Weld End Union -PUW-MS0-MTB Tube Socket Weld Female Elbow -WLF-TS-NS Male Pipe to Weld End Union -MUW-NS-MTB

9 Calibration Hoses and s s / Weld - WLM - TS - NS S - Cleaning and Packaging Special Application and P Type P Type P Size P, P FC-0 NO Specify in the same way as the P /" WM Male Connector /" Female Connector WF F FC-0 S NACE MR075 L L /" or mm Butt Weld Socket Weld TB TS Reducing Union WU Classification for Nuclear Facility Application /" or mm Butt Weld MTB Union Elbow WLU 90L 90L 5/" or mm Socket Weld MTS Union Tee WT /" or mm or M x.5 Pipe Butt Weld PB N Class Union Cross WC 7/" or mm or M x.5 Pipe Socket Weld PS Male Elbow WLM Class N " or mm or M x.5 NPT Thread NS mm or M x.5 Female Elbow WLF ISO Tapered Thread RT /" or 0 mm or M0 x.5 0 ISO Parallel Thread BP o 5 Union Elbow WV mm or M x.5 Metric Thread MS Adapter WA /" or M x.5 Pipe To Weld PUW 5 mm P M7 x MUW Male Pipe To Weld 5 7 mm P P 0 mm or M0 x 0 " or mm P mm P, P, P and P shall be described in the following orders: Pipe thread connection type after weld connection type ("PUW" and "MUW" excluded) Pipe Butt Weld - Tube Butt Weld - Pipe Socket Weld - Tube Socket Weld - Others Describe in descending order as per size if the end connection types are the same Describe the end of P if all end connections are the same Cleaning and Packaging: FC-0: Standard cleaning and packaging for general industrial procedures FC-0: Special cleaning and packaging for wetted system components to ensure compliance with product cleanliness requirement as stated in ASTM G9 Level C Note: "" is used for composition rules of FITOK product model, Not suitable for specific product part number selection, not random combinations. If in doubt, please contact FITOK group or authorized agent. Assembly and disassembly without requirement for a wrench or thread sealant Flexible hoses with small inside diameter and low internal volume Variety of adapters to connect with wide range of calibration devices Mix-interchangeable with other main brands Every assembly is factory tested with pure water at.5 times the maximum working pressure. Quick-test Hoses QH Working pressure up to: 900 psig (75 bar) Working temperature : - F to F (- C to 0 Hose outside diameter: 0." (5 mm) Hose inside diameter: 0.0" ( mm) End connection materials:, 0 Hose Ends FST End SMS End SMS0 End FT End Types listed are standard. Other types are available upon request. End Connection S /-0 UNF 0 M.0 M 0.5 / " Tube Adapter - QH - SMS0 - F ST - F End Connection Type and Size QH FST / '' Female UNF Swivel NS NS FT FT SMS SMS0 / Male NPT / Male NPT NS End NS End FT End / " Tube Adapter / " Tube Adapter M x.0 Female Swivel M0 x.5 Female Swivel /-7 NPT /- NPT /" Tube Adapter End Connection Type and Size Same as End Specify in the same way as the end connection type and size Overall Length FXX XX in. MXX XX mm Note: "" is used for composition rules of FITOK product model, Not suitable for specific product part number selection, not random combinations. If in doubt, please contact FITOK group or authorized agent. s / Calibration s and Hoses

10 5 s / Calibration s and Hoses Quick-test Adapters and s QT Working pressure up to: s:, 0 Without valve: 5000 psig (5 bar) Optional check valves and protective caps available With valve: 000 psig (07 bar) Working temperature: Fluorocarbon FKM seal: - F to 00 F (- C to 0 Buna N seal: - F to 50 F (- C to Configuration Type Example Male NPT Adapters Female NPT Adapters -QT-NS-ST -QT-FNS-ST Configuration Type DP Transmitter Calibration Adapters Quick-test Tees Male High Pressure Adapters DP Transmitter Calibration Adapters Example -QT-CH-ST -QT-ST-ST-ST -QT-0HP-ST -QT-CH-FL s / Calibration s and Hoses Hand Tight Adapters -QT-MS0-MS Male BSPT Adapters, with valve -QT-RT-ST-V Female BSPT Adapters, with cap -QT-FRT-ST-PC High Pressure Quick-test Hose Assemblies HQH Male BSPP Adapters -QT-RS-ST W orking pressure up to: 000 psig ( 90 bar) Working temperature: - 0 F to F (-0 C to 0 Inner diameter of hose: 0.0'' ( mm) Hose end materials:, 0 Outer diameter of hose: 0.'' ( mm) Fluid media: water, petroleum based oils, air, inert gas Female BSPP Adapters -QT-RG-ST Male NPT Quick-test Gauge Adapters -QT-NS-FST Female NPT Quick-test Gauge Adapters -QT-FNS-FST - HQH - FXT - FXT - M00 Female BSPP Quick-test Gauge Adapters -QT-RG-FST Quick-test Hose Unions -QT-ST-ST End connection End Connection Type and Size End Connection Type and Size Overall Length Quick-test Tube Adapters -QT-QL-ST HQH FXT Female Swivel Same as End FXX XX in. S 0 XT Male Swivel MXX XX mm Hand Tight Female NPT Quick-test Gauge Adapters -QT-QNS-ST Note: "" is used for composition rules of FITOK product model, Not suitable for specific product part number selection, not random combinations. If in doubt, please contact FITOK group or authorized agent.

11 7 s / Calibration s and Hoses High Pressure Quick-test s HQT W orking pressure up to: 90 bar ( 000 psig) Working temperature: FKM Seal: - F to 00 F (- C to 0 NBR Seal: - F to 50 F (- C to s:, 0 Convenient connection: No wrench or thread sealant required for assembly or disassembly. This kind of fittings is not applicable to use with FITOK QH series Quick-test Hose, please use with FITOK HQH series Quick-test Hose. Configuration Type Male NPT Adapter Example -HQT-NS-XT VL Vacuum Tube s Stainless steel construction, fluorocarbon FKM O-ring Available in tube sizes from /" to /" Working temperature: -5 F to 00 F (- C to 0 Knurled nut for easy, finger-tight assembly Reliable, repeatable sealing performance Configuration Type Example Union -U-VL Reducing Union -U-VL-VL s / VL Vacuum Tube s Male NPT Quick-test Gauge Adapters -HQT-NS-FXT Tube Union -U-VL-FL Female NPT Adapters -HQT-FNS-XT Union Elbow -LU-VL Male BSPP Adapters -HQT-RS-XT Union Tee -TTT-VL High Pressure Male Adapters -HQT-0HP-XT Male Connector -CM-VL-NS Quick-test Unions -HQT-XT-XT Adapter -CW-VL-A Quick-test Bulkhead Unions -HQT-XT-TXT Nut -N-VL Quick-test Tees -HQT-XT-XT-XT O-ring VI7-0

12 9 0 s / VA Vacuum Adapter s VA Vacuum Adapter s Vacuum Range: Copper Seal: - Torr Elastomeric Seal: - Torr Working temperature: Copper Seal: -5 F to F (-00 C to 50 Elastomeric Seal: - F to 0 F (-0 C to 50 Standard materials are in stainless steel 0, 0L,, L and Aluminum. KF Adapter s Configuration A Type ( Default) Type KF to Female NPT Example S-VA-KF-FNS Configuration CF Adapter s Configuration Type KF to CF Flange Straight Reducing KF to CF Flange Conical Reducing Type CF to Female FR Metal Gasket Face Seal Example S-VA-KF-CF-SR S-VA-KF-CF-NCR Example S-VA-CF-FFR s / VA Vacuum Adapter s KF to Female NPT S-VA-KF-FNS-N B Type CF to Rotatable Male FR Metal Gasket Face Seal S-VA-CF-RFR KF to Male NPT S-VA-KF-NS CF to Tube S-VA-CF-FL KF to Female FR Metal Gasket Face Seal S-VA-KF-FFR KF to Rotatable Male FR Metal Gasket Face Seal S-VA-KF-RFR CF to Vacuum Tube S-VA-CF-VL KF to Tube S-VA-KF-FL Other Adapter s Configuration Type Example KF to Vacuum Tube S-VA-KF5-VL Male ISO Tapered Thread S-VA-KF-RT

13 Valves / Ball Valves Ball Valves BG -piece precision cast body construction Body materials: CFM (), CFM (L), CF (0), CF (0L) and 90L Seat material: PTFE Packing material: PTFE End connections: / to thread BO -piece forged body, top entry Body materials:, L, 0,, 0L, 90L, alloy 00, and brass Seat materials: PTFE and UHMWPE Flow patterns: -way, -way, -way, 5-way, -way and 7-way End Connections: / to / female thread Valves / Ball /" to " pipe butt or socket weld / " to /" and mm to mm tube fitting /" to " and mm to 5 mm tube butt or socket weld Orifice sizes: 0.05" (. mm) to 0." (. mm) /" to " and mm to 5 mm tube fitting Working pressure up to: 000 psig (07 bar) Orifice sizes: 0.9" (. mm) to " (7 mm) Working temperature: -5 F to 00 F (-5 C to Working pressure up to: 00 psig (9.0 bar) Working temperature: -0 F to 50 F (- C to BR Strong flowing capability and low operating torque -way Ball valves available for flow in two direction Symmetrical damping of operate, low operating torque and easy to operate Pneumatic or electric actuator available BF and BFH Forged body with end connectors Body materials:, L, 90L, and alloy 00 Seat materials: PTFE, PCTFE and PEEK Packing materials: fluorocarbon FKM and PTFE End connections: Options for handle color Every valve is factory tested with nitrogen at rated pressure; If rated pressure is greater than 000 psig, tested at 000 psig accordingly. Orifice size: 0.9" (. mm) Working pressure up to: BF : 000 psig ( bar) BFH : 000 psig (90 bar) Working temperature: 0 F to 50 F (- C to BH -piece precision cast body construction Body materials: CFM (), CFM (L), CF (0), CF (0L) and 90L Seat materials: PTFE, RPTFE and PEEK Packing materials: PTFE, RPTFE, Graphite and O-ring End connections: / to thread / " to " pipe butt or socket weld /" to " and mm to 50 mm tube butt or socket weld /" to " and mm to mm tube fitting Orifice sizes: 0.9" (. mm) to.5" (. mm) Working pressure up to: 000 psig (07 bar) Working temperature: -0 F to 50 F (- C to Cold drawn hex bar and casting body with single connector Body materials:, 0, L, 90L and brass Seat material: PTFE Packing material: PTFE End connections: / to thread /" to " and mm to 5 mm tube fitting Orifice sizes: 0.9" (. mm) to 0." ( mm) Working pressure up to: 00 psig (9.0 bar) Working temperature: -0 F to 50 F (- C to / to / female NPT /" to /" and mm to mm tube fitting BF BF BFH

14 J Y Blue Handle or Vinyl Covered Valves / Ball BP Cold drawn bar or forged body with end connectors Body materials:, 0,, and 90L Seat materials: PVDF, PCTFE and PEEK Packing material: PTFE Flow patterns: -way and -way End connections: / to thread /" to " and mm to 5 mm tube fitting Orifice sizes: 0.9" ( mm), 0.5" (.7 mm) and 0.7" ( mm) Working pressure up to: 000 psig (90 bar) Working temperature: -0 F to 50 F (-0 C to Inlet BV Precision cast body with end connectors Body materials: CFM (), CFM (L), CF (0), Seat materials: PTFE, PCTFE and PEEK Packing material: PTFE Flow patterns: -way straight, -way angle, and -way End connections: 90L, CF (0L) and brass / to / thread /" to /" and mm to mm tube fitting Orifice sizes: 0.09" (. mm) to 0." (. mm) Working pressure up to: 000 psig ( bar) Working temperature: -5 F to 50 F (-5 C to Inlet Inlet Fluorocarbon FKM (BF, BFH) Same as Port /" Female NPT FNS BF PTFE(BG, BH, BO, BP, BR, BV) mm Male NPT NS BFH /" Female BSPT FRT BG Buna N B Specify every Port designator if any of its Ports is different from the others 5/" Ethylene propylene 5 Male BSPT RT BH E /" or mm or M x /" or mm Female Metric Thread (for RG) Male Metric FMS BO Graphite G " (. mm) 0 0." (. mm) 0 0.7" (. mm) " (.7 mm) 07 0." (7. mm) mm or M x /" or mm mm or M x.5 Thread (for RG) Female BSPP (for BP) Male BSPP (for RG) Fractional Tube MS BP UHMWPE H 0.5" (.9 mm) For BR..... BV - FL - FL - FNS - P - R - RXHQ - SF Cleaning and Packaging Special Application Flow Pattern For Actuator Handle/ Actuator Packing Orifice Size Seat Port / Size Port / Type Port Type Port Size Body NO Straight Black, Nylon (BF, BFH, BO, BV) CFM/ NACE MR075 S Angle (Bottom Port Inlet) A Stainless steel withyellow vinyl covered (BG, BH, BP, BR) CFM/ L L CF/ 0 S -way Red Handle or Vinyl Covered C CF/ 0L L -way FC-0 Green Handle or Vinyl Covered S FC-0 F F For BO 5-way 5 Brass B -way Fluorocarbon FKM FRP BR K Alloy 00 M 7-way 7 Yellow Nylon BP BV Neoprene N 0.0" (. mm) For BV BH F U Black Aluminium FL F Normally Closed Spring Return Pneumatic Actuator PEEK P CS 0." (. mm) PTFE " or mm mm ML D5 NO 90 Normally Open Spring Return Pneumatic Actuator R RPTFE UHMWPE H OS Mechanical Limit Switch 0 mm or M0 x.5 mm or M x.5 /" or M x.5 5 mm Socket Socket Butt Weld Butt Weld MTS PTFE T 0.50" (.7 mm) 0." (. mm).... D7 H K PCTFE 0 Duplex 05 Duplex Double Acting Pneumatic Actuator DA Inductive Limit Switch TS INC N P PEEK Inconel 00 MTB Carbon Steel CS Q Electromagnetic Valve left end normally open spring return pneumatic actuator LX R Reinforced R PTFE 5 TB 90L 90L Mechanical Limit Switch and Electromagnetic Valve right end normally open spring return pneumatic actuator RX HQ M7 x 7 Pipe Socket Weld PS Double Acting Pneumatic Actuator DX mm Pipe Butt Weld PB Inductive Limit Switch and Electromagnetic Valve 90 Electric Actuator EA " or mm NQ Nut + Gasket + Bulge Fractional Tube Nipple UFB / " or M x Electric Actuator EX Note: "" is used for composition rules of FITOK product model, Not suitable for specific product part number selection, not random combinations. If in doubt, please contact FITOK group or authorized agent. /" or M0 x 0 Nut + Gasket + Bulge Nipple UMB " or M x Nut + Gasket + Bulge Pipe Nipple UPB " Valves / Ball

15 5 Bleed Valves Check Valves Valves / Bleed RB Compact design for convenient installation Chrome-plated stem and tip extend cycle life Working pressure up to 000 psig (90 bar) Working temperature: -5 F to 50 F (-5 C to 5 Stainless steel, carbon steel, and alloy R-05 body materials End connections: / to / male NPT / to / male BSPT M x, M x and M x male Metric Thread Valves / Check CV, CH and CO Fixed cracking pressure Can be installed in any direction CV Type RB - NS - L - SH - SF Type The resilient O-ring seat design provides cushioned and noise-free Working pressure up to: 000 psig (07 bar) closing, and resists seat flow-out. Working temperature: - F to 75 F (- C to 90 Cracking pressure: / to 5 psig (0.0 to.7 bar) Body materials: stainless steel, brass, and alloy End connections: /" to " and mm to mm tube fitting / to female NPT / to male NPT / to male FR fitting CH RB L S L S B M CS Body L 0 0L Brass Alloy R-05 Carbon Steel NS RT Inlet Type Male NPT Male BSPT Inlet Size /" /" /" Handle Special Application Cleaning and Packaging /" Type NO NO FC-0 L Type Stainless Steel SH Handle (Only For Type ) Note: "" is used for composition rules of FITOK product model, Not suitable for specific product part number selection, not random combinations. If in doubt, please contact FITOK group or authorized agent. S NACE MR 075 F FC-0 The seat ring is continuously cleaned by media, avoiding Working pressure up to: 000 psig ( bar) Cracking pressure: / to 5 psig (0.0 to.7 bar) Body materials: stainless steel and alloy End connections: Compact, one piece body Working pressure up to: 000 psig (07 bar) secondary pollution. Working temperature: - F to 00 F (- C to 0 /" to " and mm to 5 mm tube fitting / to female NPT, / to male NPT / to female BSPT, / to male BSPT / to / male FO fitting, / to male FR fitting CO Working temperature: - F to 75 F (- C to 90 Cracking pressure: / to 5 psig (0.0 to.7 bar) Body materials: stainless steel, brass, and alloy End connections: / to / NPT / to / BSPT

16 7 Valves / Check CA and COA Adjustable cracking pressure Variety of springs available Installation in any direction CA Working pressure up to: 000 psig (07 bar) Working temperature: - F to 75 F (- C to 90 Cracking pressure: to 00 psig (0. to. bar) Body materials: stainless steel, brass, and alloy End connections: /" to /" and mm tube fitting / male FR fitting COA Compact, one piece body Working pressure up to: 000 psig (07 bar) Working temperature: - F to 75 F (- C to 90 Cracking pressure: to 00 psig (0. to. bar) Body materials: stainless steel, brass, and alloy End connections: / female NPT / to / male NPT / to / male BSPT CL Union bonnet design All stainless steel construction Horizontal installation Working pressure up to: 000 psig ( bar) Working temperature: -5 F to 900 F (-5 C to Body materials: stainless steel End connections: /" to /" and mm tube fitting / to / female NPT /" to /" tube socket weld /" to /" pipe butt weld CV CH CO CA COA CL CW Body L L M Alloy 00 B Brass FNS Female NPT NS Male NPT FRT Female BSPT RT Male BSPT FMS Female Metric Thread (for RP-M) MS FRP BP TS Socket Weld MTS Socket Weld TB Butt Weld MTB Butt Weld PS Pipe Socket Weld PB Pipe Butt Weld FL ML Nut+Gasket+ UFB Fractional Bulge Nipple UMB FO FFR FR RFR Inlet Type Male Metric Thread (for RG-M) Female BSPP (for RP) Male BSPP (for RG) Nut + Gasket + Metric Bulge Nipple Male FO Female FR Male FR Rotatable Male FR of Spring Kits CV - FL - ML - B - SF Inlet Size 0 5 /" /" /" or mm / " or mm mm /" or mm mm or M x.5 " or mm mm /" or 0 mm or M0 x.5 mm or M x.5 5 mm Type Size B N E Z Fluorocarbon FKM Buna N Neoprene Ethylene propylene Kalrez Seal Same as Inlet Specified in the same way as the inlet type and size Special Cracking Pressure Application psig / psig psig psig 5 psig to 50 psig 5 50 to 50 psig 50 to 50 psig 7 50 to 00 psig For CV CH CO For CA COA S NO NACE MR075 Cleaning and Packaging FC-0 F FC-0. Note: "" is used for composition rules of FITOK product model, Not suitable for specific product part number selection, not random combinations. If in doubt, please contact FITOK group or authorized agent.. The material in "" is general material, end connection type & size is general standard. If other end connection is needed, please contact FITOK group or authorized agent. CV - SP - Valves / Check CW All-welded design for enhanced safety Installation in any directions Spring Part Name Body Size Cracking Pressure Working pressure up to: 000 psig (07 bar) Working temperature: - F to 00 F (- C to 0 Cracking pressure: less than psig (0. bar) Body materials: stainless steel End connections: /" and mm tube fitting /" to /" male and female FR fitting /" to /" and mm tube butt weld S S 0 0 A75 X-750 CV CH CO CA COA SP Spring. Note: "" is used for composition rules of FITOK product model, Not suitable for specific product part number selection, not random combinations. If in doubt, please contact FITOK group or authorized agent.. The material in "" is general material. If other material is needed, please contact FITOK group or authorized agent. 5 7 psig / psig psig psig 5 psig ~50 psig 50~50 psig 50~50 psig 50~00 psig For CV CH CO For CA COA

17 9 0 Excess Flow Valves Purge Valves Valves / Excess Flow EV Compact design for convenient installation Working pressure up to: 000 psig ( bar) Working temperature: -F to 00 F (- C to 0 Stainless steel construction Leak-tight performance testing for every valve with nitrogen at the maximum working pressure End connections: /" to /" male mm to mm tube fitting / to / male FR / to / NPT RP Compact design for convenient installation Bonnet crimped to valve body to prevent accidental disassembly Straight, tee and cross body constructions Working pressure up to: 000 psig (7 bar) Working temperature: -5 F to 00 F (-5 C to 5 Stainless steel, brass, and carbon steel body materials End connections: /" to " and mm to mm tube fitting / to female NPT / to male NPT Valves / Purge EV - FL - ML - Z - SF (L) (TL) (TA) ( Body Inlet Type Inlet Size Type Size Seal Special Application Cleaning and Packaging EV S 0 S L L L 0L 90L 90L FNS NS FRT RT Male BSPT Female Metric FMS Thread (for RP-M) MS FRP BP FL ML Female NPT Male NPT Female BSPT Male Metric Thread (for RG-M) Female BSPP (for RP) Male BSPP (for RG) /" /" / " or mm / " or mm mm /" or mm Same as Inlet Specified in the same way as the inlet typeand size B N E Z Fluorocarbon FKM Buna N Neoprene Ethylene propylene Kalrez NO NACE S MR075 Note: "" is used for composition rules of FITOK product model, Not suitable for specific product part number selection, not random combinations. If in doubt, please contact FITOK group or authorized agent. F FC-0 FC-0 RP L S L S B CS Body L 0 0L Brass Carbon Steel 90L 90L L TL TA C Type Straight In-line Tee Angle Tee Cross End Connection Type FNS NS FRT RT End Connection Size Female Metric FMS Thread (for RP-M) MS FRP BP FL ML FT FR RP - C - FL - ML - FL - SF Female NPT Male NPT Female BSPT Male BSPT Male Metric Thread (for RG-M) Female BSPP (for RP) Male BSPP (for RG) Male FR /" /" / " or mm End Connection Type mm / " or mm mm or M x.5 " or mm End Connection Size Same as connection Specified in the same way as the end connection type and size / " or mm End Connection Type End Connection Size Same as connection Specified in the same way as the end connection type and size Special Cleaning and Application Packaging Note: "" is used for composition rules of FITOK product model, Not suitable for specific product part number selection, not random combinations. If in doubt, please contact FITOK group or authorized agent. S NO NACE MR075 FC-0 F FC-0

18 Valves / Relief Relief Valves RM Set Pressure: color-coded springs available for a wide range of set pressure, 50 to F (. to 0 Maximum outlet pressure: 500 psig ( bar) Orifice size: 0.5" (. mm) Balance stem design to eliminate the effect of system back pressure Working temperature: -F to 00 F (- C to Liquid or gas service Adjustable bonnet cap and adjustable set pressure Lock wired secure cap to maintain the set pressure Variety of seal materials Label identifies the set pressure range Manual override handle available to open the valve without changing the set pressure which is lower than 500 psig End connections: /" to /" and mm to mm tube fitting / to / NPT Valves / Relief RV Set Pressure: 7 color-coded springs available for a wide range of set pressure, 50 to F (. to 0 Maximum outlet pressure: 500 psig ( bar) Orifice size: RV : 0." (. mm) Balance stem design to eliminate the effect of system back pressure Working temperature: - F to 00 F (-C to Liquid or gas service Adjustable bonnet cap and adjustable set pressure Lock wired secure cap to maintain the set pressure Variety of seal materials Label identifies the set pressure range. Manual override handle available to open the valve without changing the set pressure which is lower than 500 psig End connections: /" and mm to mm tube fitting / NPT RL Set Pressure: to 5 70 F (0. to Maximum outlet pressure: 5 psig (5.5 bar) Orifice size: 0.9" (. mm) and 0.5" (. mm) Pre-set pressure = Desired pressure - 0. Back pressure Working temperature: -F to 00 F (- C to Liquid or gas service Adjustable bonnet cap and adjustable set pressure Lock wired secure cap to maintain the set pressure Variety of seal materials Label identifies the set pressure range Manual override handle available to open the valve without changing the set pressure which is lower than 500 psig End connections: /" to /" and mm to mm tube fitting / to / NPT Spring for Valves 7P S7700 Valve RV RM RL Part Name SP Spring 7 Valve Orifice Size 0."(. mm) RV Valves Only 0.9"(. mm) RL Valves Only 0.5"(. mm) RL and RM Valves 7PRV - SP - Y - B - L Spring Kit Color F Green 50~00 psig (For RV and RM Valves) O Orange 00~700 psig (For RV and RM Valves) Y Yellow ~5 psig (For RL Valves Only) Yellow 700~500 psig (For RV and RM Valves) P Purple 500~500 psig (For RV Valves Only) W White 500~500 psig (For RV Valves Only) J Blue 500~500 psig (For RV Valves Only) C Red 500~000 psig (For RV Valves Only) Note: Most configurations are available but not everyone. Every spring kit includes a corresponding color label. Label Lock Wire With Seal L Corresponding color label, required to be selected NO YES

19 Bellows-sealed Valves Valves / Bellows-sealed Valves / Relief RV - FL - ML - Z - WM - LSF Manual Override Handle Seal Orifice Size Size Type Inlet Size Secondary containment system above the bellows. Hydraulic-formed multilayer bellows enhance cycle life. Nonrotating stem tip eliminates galling within the seat area. Strictly controlled bellows stroke to improve safety and cycle life. Replaceable bellows and stem assembly. Regulating, conical and spherical stem tips available. Panel, bottom and side mounting available. SW Working pressure up to: 00 psig (9.0 bar) Working temperature: -0 F to 900 F (- C to Stainless steel, brass and alloy 00 body materials End connections: /" to " and mm to 5 mm tube fitting /" to /" and mm to mm tube socket weld /" to /" and mm to mm tube butt weld / to / FR fitting SU Working pressure up to: 500 psig (7 bar) Working temperature: -0 F to 00 F (- C to 9 Stainless steel body materials End connections: /" to /" and mm to 5 mm tube fitting /" to " and mm to 5 mm tube socket weld /" to " and mm to 5 mm tube butt weld / to / FR fitting Valves Body Inlet Type RV RM RL S Yellow ~5 psig (RL Only) Fluorocarbon FKM 0." (. mm) RV Only Same as inlet /" /" Green 50~00 psig (RV and RM) Orange 00~700 psig (RV and RM) F Buna N B Neoprene Ethylene propylene N 0.9" (. mm) RL Only 7 E Specified in the same way as the inlet type and size /" or mm O /" or mm mm Yellow 700~500 psig (RV and RM) S Y L Kalrez RV Only L Z 0.5" (. mm) RL and RM 0 /" or mm Purple 500~500 psig (RV Only) L 0L 90L 90L FNS Female NPT NS FRT RT FMS MS FRP BP FL ML Male NPT Female BSPT Male BSPT Female Metric Thread (for RG) Male Metric Thread (for RG) Female BSPP (for RP) Male BSPP (for RG) Spring Kit Color Lock wire with seal Special Application Cleaning and Packaging P White 500~500 psig (RV Only) Blue 500~500 psig (RV Only) W J Red 500~000 psig (RV Only) C No spring N No L Yes S No NACE MR075 FC-0 F FC-0 M None Manual Override Handle Note: Most configurations are available but not everyone.

20 5 Valves / Bellows-sealed SW - FL - ML WR - BSF Cleaning and Packaging Special Application Body Inlet Type Inlet Size Tip Type Type Orifice Size Tip Handle Size FC-0 Green Aluminum Bar Spherical Standard 0. " (. mm) Same as Inlet " / Socket Weld TS SW FC-0 F Black Aluminum Bar Regulating R PCTFE K Stellite W Specified in the same way as lnlet type and size Socket Weld L L B 0. " (. mm) /" SU MTS Conical N " or mm / S 0 Red Aluminum Bar C 0. " (7. mm) Butt Weld TB NO / " or mm L 0L Blue Aluminum Bar J 0. " (7. mm) 5 Butt Weld MTB NACE MR075 S mm S Classification for Nuclear Facility Application Stainless Steel Bar M 0.9 " ( mm) / " or mm PS Pipe Socket Weld Alloy 00 M O Black Knob " (7 mm) PB Pipe Butt Weld Brass B Class N mm 或 M T Toggle handle " or mm FL 90L 90L Class N mm ML 0 mm 0 Nut + Gasket + Fractional Bulge Nipple UFB Nut + Gasket + Metric Bulge Nipple UMB FFR Female FR Note: "" is used for composition rules of FITOK product model, Not suitable for specific product part number selection, not random combinations. If in doubt, please contact FR Male FR group or authorized agent. FITOK Metering Valves MS Working pressure up to: 000 psig ( bar) Working temperature: - F to 00 F (- C to 0 Orifice size: 0.0" (0. mm) Flow coefficient (Cv): 0.00 Stem taper: Turns to open: 9 to Shutoff service: not available Panel mountable Flow patterns: straight, angle, cross and double Handle types: round, vernier, slotted and adjustable-torque Variety of materials available for valve body End connections: /" to /" and mm to mm tube fitting / male FR / to / NPT MV and ML Working pressure up to: 00 psig (9.0 bar) Working temperature: - F to 00 F (- C to 0 Flow coefficients (Cv): MV series: 0.0 ML series: 0.5 Orifice sizes: MV series: 0.05" (. mm) ML series: 0." (.5 mm) Stem taper: MV series: ML series:.5 Turns to open: MV series: to ML series: to Shutoff service: MV series: not available ML series: available Panel mountable Flow patterns: straight, angle, cross (MV ) and double (MV ) Handle types: round, vernier, slotted and adjustable-torque Variety of materials available for valve body End connections: /" to /" and mm to mm tube fitting / male FR / to / NPT MH Working pressure up to: 5000 psig (5 bar) Working temperature: -5 F to 50 F (-5 C to 5 Orifice size: 0.0" (. mm) Flow coefficient (Cv): 0.0 Stem taper: Shutoff service: available Variety of end connections Turns to open: 9 to Panel mountable Flow patterns: straight and angle Handle type: round phenolic, vernier Variety of materials available for valve body End connections: /" to /" and mm to mm tube fitting / male FR / to / NPT Valves / Metering

21 7 Valves / Metering - FL - ML - EVJ - ASF MV Cleaning and Packaging Special Application Flow Pattern Inlet Type Inlet Size O-ring Handle Color Handle Type and Default color Size Type Body FC-0 NO Same as inlet Default Straight Round (Black) For MH and ML Fluorocarbon FKM /" Female NPT FNS MS FC-0 F NACE MR075 S Angle A Red C Knurled (Metallic luster) For MS and MV Buna N B /" Male NPT NS L L Double D Green F Female BSPT FRT Slotted (Metallic luster) L Ethylene Propylene E Specified in the same way as the inlet type and size MV mm 0 S ML Cross R Blue J Male BSPT RT Adjustable torque (Metallic luster) Neoprene /" 0L L N MH T Orange O Kalrez /" or mm Female Metric Thread (for RP) S Z FMS Yellow Y Vernier (MH : Metallic luster) (Other : Black) V Brass B G Graphite (MH Only) / " or mm mm Male Metric Thread (for RG) 90L 90L MS /"or mm Female BSPP (for RP) FRP Male BSPP (for RG) BP Note: "" is used for composition rules of FITOK product model, Not suitable for specific product part number selection, not random combinations. If in doubt, please contact Fractional Tube FL ML group or authorized agent. FITOK FO FO Male FR FR Needle Valves Needle Valves Features The nonrotating stem eliminates galling between the seat and tip, and reducing the friction of sealed packing. Effectively improve the service life of the valve and valve packing. Intermittent packing system designed to effectively reduce the cold flow of valve packing and the valve operating torque, while use System media for the useful of valve packing. Packing mounted on the bottom of the stem transmission thread designed to achieve the isolation of transmission thread lubricating material and system medium to prevent transmission thread lubricating substance contamination of the media on the system. Forged Needle Valves NF, NFH One-piece forged body. Body materials : Carbon steel/a5,, L, 0, 0L,, Duplex 05, Alloy 00, Alloy C- 7, and brass, other material please contact with manufacture. Orifice ( mm):,.,, 5 and. (5 and suitable for NF series only). Working pressure up to: NF 000 psig (. MPa); NFH 000 psig ( 9.0 MPa). Working temperature: -5 F to 00 F (-5 C to 9. Sealing face materials: Same as body material, optional stellite available. Stem tips type: blunt, ball, regulating, and soft tips (suitable for NF series only). End connections type and size: /" to ", M to M thread; /" to ", mm to mm tube fitting; /" to ", mm to 5 mm weld. Threaded operating torque transmitted using online extrusion and roll forming process, Effectively improve the strength and precision of the threads. To provide strong protection for operating torque for the screw to pass long-term, stable and reliable torque transmission. Different body materials and structure selection, a variety of colors and forms of the handle, and optional panel mounting structure to achieve different requirements, different application occasions. Valve reference standard: According to ASME B., each valve is tested for strength and leak-tight performance with pure water or nitrogen at max working pressure before delivered out. Valves / Needle

22 9 0 Valves / Needle Bar Stock Needle Valves NB, NBH Cold drawn bar. Body materials:, L, 0, 0L, Duplex 05, Alloy 00, Alloy C- 7, and brass, other material please contact with manufacture. Orifice ( mm) :,.,, 5 and. ( 5 and suitable for NB series only). Working pressure up to: NB 000 psig (. MPa) ; NBH 000 psig (9.0 MPa). Working temperature: -5 F to 00 F (-5 C to 9. Sealing face materials: Same as body material, optional stellite available. Stem tips type: blunt, ball, regulating, and soft tips (suitable for NB series only). End connections type and size: /" to ", M to M7 thread; /" to ", mm to 5 mm tube fitting; /" to ", mm to mm weld. Union Bonnet Needle Valves NU, NUH One-piece forged body. Body materials:, L, 0, 0L, Duplex 05, Alloy 00, Alloy C- 7, and brass, other material please contact with manufacture. Orifice ( mm) :,., Working pressure up to: NU 000 psig (. MPa) ; NUH 000 psig (9.0 MPa). Working temperature: -5 F to 00 F (-5 C to 9. Sealing face materials: Same as body material, optional stellite available. Stem tips type: blunt, ball, regulating, and soft tips (suitable for NU series only). End connections type and size: /" to ", M to M7 thread; /" to ", mm to 5 mm tube fitting; /" to ", mm to mm weld. Toggle Valves NT One-piece forged body. Body materials:, L, 0,0L, and brass, other material please contact with manufacture. Orifice (mm):,,. Working pressure up to: 00 psig (.07 Mpa). Working temperature: -0 F to 50 F (- C to. Sealing face materials: Same as body material. End connections type and size: /" to /", M to M0 thread; /" to /", mm to mm tube fitting. Outside Screw and Yoke (OS&Y) Needle Valves NY, NYH Cold drawn bar. Body materials: Carbon steel/a5,, L, 0, 0L, Duplex, Alloy 00, Alloy C-7, and brass, other material please contact with manufacture. Orifice (mm): Working pressure up to: NY 000 psig (. Mpa) ; NYH 000 psig (9.0 MPa). Working temperature: -5 F to 00 F (-5 C to 9. Sealing face materials: Same as body material, optional stellite available. Externally adjustable gland independent of spindle thread. End connections type and size: /" to /", M to M0 thread; /" to /", mm to mm tube fitting; /" to /", mm to 0 mm weld. Valves / Needle Rising Plug Valves General Purpose Needle Valves Nonrotating-stem Needle Valves NR, NRG NG, NGH One-piece forged body. Body materials: Carbon steel/a5,, L, 0, 0L, Duplex 05, Alloy 00, Alloy C- 7, and brass, other material please contact with manufacture. Orifice ( mm) :,,., Working pressure up to: NG 000 psig (0.7 Mpa) ; NGH 5000 psig (.5 Mpa). Working temperature: -5 F to 500 F (-5 C to 0 ; Sealing face materials: Same as body material. Stem tips type: blunt, ball, regulating, and soft tips. End connections type and size: /" to /", M to M7 thread; /" to /", mm to 5 mm tube fitting. ND, NDH One-piece forged body. Body materials:, L, 0, 0L, Alloy 00 and brass, other material please contact with manufacture. Orifice ( mm) :,, 5. Working pressure up to: ND 000 psig (0.7 MPa); NDH 5000 psig (.5 MPa). Working temperature: -0 F to 50 F (- C to. Designed handle to prevent contaminants from entering into the valve. Non-rotating stem, soft stem tip. End connections type and size: /" to /", M to M thread; /" to /", mm to mm tube fitting. Cold drawn square bar. Body materials:, L, 0, 0L, Duplex, Alloy 00, Alloy C-7, and brass, other material please contact with manufacture. Orifice (mm):,. Working pressure up to: 000 psig (. Mpa). Working temperature: -0 F to 00 F (- C to 0. Sealing face materials: soft seat design, seat material: Acetal, PEEK, PFA. End connections type and size: /" to /", M to M0 thread; /" to /", mm to mm tube fitting.

23 Valves / Needle - PB - ML - WR - GYM - A - SF NB Cleaning and Packaging Special Application Flow Pattern Panel Mounting Handle Packing Tip Type Tip Orifice Size Seat Inlet Type Inlet Size Type Size Body FC-0 Straight No PTFE Blunt Same as FNS Female NPT /" 5 0.0" Inlet (.0 mm) FC-0 F Angle A NF/NFH NB/NBH NG/NGH NU/NUH NF/NFH NB/NBH NG/NGH NF/NFH PEEK P Soft Tip- PTFE Soft Tip- PCTFE Regulating R 0." (.0 mm) 7 /" Male NPT NS L L Yes Y Graphite G NF/NFH NB/NBH NG/NGH NU/NUH B Ball 0.5" (. mm) If different specify in the same way as Inlet type and Inlet size NB/NBH NU/NUH NY/NYH Female BSPT FRT 0 S T 0.9" ( mm) 9 /" or mm /" or mm NG/NGH Black Aluminum Bar Red Aluminum Bar Green Aluminum Bar Blue Aluminum Bar FKM Male BSPT RT 0L L NU/NUH NO Buna N B K 0.59" (5 mm) mm Female Metric Thread (for RP) FMS S C ND NR/NRG NT ND NACE MR075 S Classification for Nuclear Facility Application NF/NFH NB/NBH NG/NGH Soft Tip- PEEK P 0 0.7" ( mm) Male Metric Thread (for RG) MS F9 9 Soft Tip- PCTFE FRP F9 9 ND Soft Tip- PEEK P /" or mm mm or M x.5 " or mm F Ethylene Propylene E NT J Class N NU/NUH NY/NYH Stainless Steel Bar Female BSPP (for RP) Male BSPP (for RG) NR/NRG BP Duplex 05 D5 M Same as Body Class mm TS Titanium TI O Black Knob NF/NFH NB/NBH NU/NUH NY/NYH NY/NYH N Same as Body Stellite NG Socket Weld Socket Weld MTS Alloy 0 0 C0 Black Knob W Stellite Acetal /" or 0 mm or M0 x.5 Tube NT Stainless Steel Handle Fractional Butt Weld TB M Duplex 05 D5 NR PEEK P mm or M x.5 Butt Weld MTB INC NF/NFH NB/NBH NU/NUH NY/NYH PFA A Titanium TI M x.5 Pipe Socket Weld PS Alloy 00 Alloy 00 Alloy C -7 HC Alloy 0 C0 5 5 mm Pipe Butt Weld PB Brass B Alloy 00 M 7 M7 x Tube Fractional FL Carbon Steel CS Alloy 00 INC mm ML Note: "" is used for composition rules of FITOK product model, Not suitable for specific product part number selection, not random combinations. If in doubt, please contact Alloy C-7 HC + Nut + Gasket Metric Bulge Nipple UMB group or authorized agent. FITOK PV Plug Valves PV Working pressure up to: 000 psig (07 bar) Working temperature: - F to 00 F (- C to 0 Size from /" to / " and to mm Orifice sizes:. mm,. mm, 7. mm Body materials:, 0, and brass Easy to maintain and clean Low operating torque Replaceable plug assembly Handle as indicator of flow direction Handle of different colors available for option Positive handle shutoff Seal materials: Fluorocarbon FKM, Buna N, Ethylene propylene, Neoprene, and Kalrez Leak-tight performance testing for every valve with nitrogen at the maximum working pressure L S B 90L Body L 0 Brass 90L FNS NS FRT RT Female NPT Male NPT Female BSPT Male BSPT Female Metallic FMS Thread (for RG) Male Metallic MS Thread (for RG) Female FRP BSPP (for RP) BP FL ML Inlet Type Male BSPP (for RG) Fractional Tube Inlet Size / Type / Size /" mm /" / " or mm / " or mm mm / " or mm B E N Z Fluorocarbon FKM Buna N Ethylene Propylene Neoprene Kalrez Inlet Same as Inlet O-ring Specified in the same way as the inlet type and size Orifice " (. mm) 0.7" 0 (. mm) 0." 07 (7. mm) Handle Note: "" is used for composition rules of FITOK product model, Not suitable for specific product part number selection, not random combinations. If in doubt, please contact FITOK group or authorized agent. R G Green Nylon Y B PV - FL - ML - FL - B0GV - SF Downstream Black Nylon Red Nylon Yellow Nylon Blue Nylon A Black Aluminium V Flow Pattern -Way NO YES -Way Inlet Special Application S No NACE MR075 Cleaning and Packaging F FC-0 FC-0 Valves / Plug

24 Valves / Two-Piece Forged Metal-Seated Ball Valves BM Size: NPS / ~ NPS (DN 5 ~ DN 50) Classes: 50 ~ 500 Globe Valves SY Size: NPS / ~ NPS (DN ~ DN 5) Classes: 500 and 500 Valves / Two-Piece Forged Metal-Seated Ball Valves Specifications Design: ASME B. Testing: ASME B. and A 59 Marking: M-SP-5 Socket weld ends: ASME B. Butt weld ends: ASME B.5 Features Two-piece forged body designs. Free floating ball design provides seat wear compensation. Ball and seats mate-lapped for 0% contact ensures absolute shutoff. The ball is forced to load into the seat by a high-strength Belleville spring. Advanced HVOF custom trim coating technology with hardness in excess of 900Hv. An advanced packing chamber design and live-loading provide long lasting, maintenancefree, stem packing tightness. Flow arrow forged into mounting flange visible above insulation. Low operating torque. Blowout-proof stem. Positive handle stop. BM CS 9 A5 F F9 F PS PB BM - PSG Body Type of Connection Pipe Socket Weld Pipe Butt Weld Note: "" is used for composition rules of FITOK product model, Not suitable for specific product part number selection, not random combinations. If in doubt, please contact FITOK group or authorized agent. Size of Connection 0 NPS / (DN 5) NPS / (DN 0) NPS (DN 5) NPS / (DN ) NPS / (DN 0) NPS (DN 50) A B C E F G Class 50 CL 00 CL 00 CL 900 CL 500 CL 500 CL Specifications Design: ASME B. Testing: ASME B. and A 59 Marking: M-SP-5 Socket weld ends: ASME B. Butt weld ends: ASME B.5 Features 5 inclined body reduces pressure drop compared with T-type. The non-rotating stem hardened and polished to reduce operating torque. Two-piece gland ensures gland and packing self-aligning. Stellite disc, seat and backseat provide excellent long service life even in severe services. Backseat bevel on the stem, not on the disc, meet specifications A-0. Large clearance between stem and disc allows disc to move freely. Dust cover and sleeve protect stem threads from dirt, dust and sand. Upper stem position indicates if valve is open or closed. One-piece, forged, bonnetless globe valves eliminate the potential for body-to-bonnet joint leakage, and not require cut or disassemble the bonnet for servicing. Splined bushing guides the stem allows quick and easy maintenance by removing all working parts at one time. Linearly instead of helical movement of the non-rotating stem reduces the total friction area between the packing and stem. Packing chamber burnished and combination graphite rings individually pre-stressed for tight seal. Fully guided disc assures seat and disc precise alignment in spite of side thrust caused by high velocity flow, and prevents stem from scoring and galling, and provides longer disc seal and body life. Double orifice design Protects seating faces because part of the erosive flow energy dissipates through disc. Two flat slots design at the internal bottom of the disc prevent the disc from rotating, so avoid high-speed rotating disc and seat contact, damage to disc and seat. Fully enclosed stem driving lubrication system with two needle roller bearings ensures low operating torque. Optional live-loading packing, disc springs keep packing tight for long periods of time without maintenance. Stop, regulating, and stop check discs are available. Handwheel is rugged and knobbed to make sure the grip even when wearing gloves. Optional handwheel colors are available. Globe

25 5 Yellow R Y Red Green G Black B Blue and needle valves. Red, green, yellow, and blue handles are available. Main lines: NPS Note: "" is used for composition rules of FITOK product model, Not suitable for specific product part number selection, not random combinations. If in doubt, please contact FITOK group or authorized agent. Stop Check NPS (DN 5) NPS / (DN 0) 500 CL H Pipe Butt Weld PB NPS / (DN 5) 500 CL Pipe Socket Weld NPS / (DN ) G Stop Needle T PTFE Graphite LL No Yes Connections: PS ANSI Class Size Of Connection Type Of Connection Distribution lines and drain ports with ball valves, plug valves, Inlet ports: " ASME, EN and GB flange pipe thread ports: / or / pipe thread /" or mm tube fitting Drain ports: / or / pipe thread Quantity of branches: to s:, 0 Each manifold is hydraulic tested with pure water at.5 times the design pressure, and leak - tight tested with nitrogen at the design pressure. Air Headers AP Distribution ports are BR series ball valves. The main line is pipe (Sch ). Working pressure up to: 00 psig (9.0 bar) Working temperature: -5 F to 50 F (- C to MP Distribution ports are PV series plug valves. The main line is pipe (Sch ). Working pressure up to: 000 psig (07 bar) Working temperature: -5 F to 50 F (- C to MN Distribution ports are NB or NF series needle valves. A5 F F5 F9 F FH CS D5 9 H SY Body The main line is pipe (Sch ). SY - PSG - TLLR Disc Type Packing Live-Loading Handwheel Color Air Headers and Distribution Manifolds Working pressure up to: 000 psig ( bar) Working temperature: -5 F to 50 F (- C to CM Distribution ports are needle valves. The main line is made of pentagon bar. Working pressure up to: 000 psig ( bar) Working temperature: -5 F to 00 F (- C to 9 Manifolds / Air Headers and Distribution Valves / Globe Manifolds

26 7 Manifolds / Air Headers and Distribution Manifolds / Air Headers and Distribution AP AP - FNSY - NST - TNS - C - SF Body Inlet Type Inlet Size Inlet Valve Quantity Type Size Va lv e/plug Drain Valve/Plug Drain Type Drain Size Handle Special Application Cleaning and Packaging AP S 0 L 0L L L FNS Female NPT / No FNS Female NPT / " or mm Valve NS Male NPT Valve FRT Female BSPT Y Yes M FRT Female BSPT or mm VP with Plug FRP Female BSPP (For RP) 0 / RT Male BSPT / " or mm T Female Metric Thread PS Pipe Socket Weld / FMS Thread (for RP) M.5 or mm Thread Male Metric TP with PB Pipe Butt Weld MS Thread (for RG) Plug Class 50 RF Serrated. Female BSPP AM FRP Flange (ANSI B.5). (For RP). Male BSPP PN 5 RF Smooth BP DM. (For RG) Flange ( EN 9 ) DE GM GE AET DMT GMT PN RF Serrated Flange ( EN 9 ) PN RF Smooth Flange (GB/T 95) PN 0 RF Serrated Flange (GB/T 95) Class 00 RF Serrated Flange (ANSI B.5) PN 0 RF Serrated Flange ( EN 9 ) PN 0 RF Serrated Flange (GB/T 95).. FL ML UFB UMB Nut+Gasket +Fractional BulgeNipple Nut+Gasket+ Metric Bulge Nipple Note: "" is used for composition rules of FITOK product model, Not suitable for specific product part number selection, not random combinations. If in doubt, please contact FITOK group or authorized agent. Cleaning and Packaging: FC-0: Standard cleaning and packaging for general industrial procedures. FC-0: Special cleaning and packaging for wetted system components to ensure compliance with product cleanliness requirements as stated in ASTM G9 Lever C. FNS NS FRT RT FMS MS FRP BP FL ML V P T N Valve with Plug Valve Plug Thread No drain None Female NPT Male NPT Female BSPT Male BSPT Female Metric Thread (for RP) Male Metric Thread (for RG) Female BSPP (For BP) Male BSPP (For RG) Fractional Tube None / " or mm M or mm /" or mm M.5 or mm Stainless steel with Yellow Vinyl Cover Stainless Steel C with Red Vinyl Cover Stainless Steel W with Blue Vinyl Cover U Black Aluminium NY Black Nyon L Handle Lock S NO NACE MR075 FC-0 F FC-0 MP, MN MN - FNSY - NST - BFNS - C - SF Body Inlet Type Inlet Size Inlet Valve Quantity Type Size Vavle/Plug Drain Type Drain Type Drain Handle Size Special Application Cleaning and Packaging MP MN S L L 0 0L L FNS FRT FRP PS PB AM DM GM Female NPT Female BSPT Female BSPP (For RP) Pipe Socket Weld Pipe Butt Weld Class 500 RF Serrated Flange (ANSI B.5) PN 0 RF Serrated Flange ( EN 9 ) PN 0 RF Serrated Flange (GB/ T 95) 0 / / / Y Yes Note: "" is used for composition rules of FITOK product model, Not suitable for specific product part number selection, not random combinations. If in doubt, please contact FITOK group or authorized agent. No..... FNS NS FRT RT FMS MS FRP BP FL ML UFB UMB Female NPT Male NPT Female BSPT Male BSPT Female Metric Thread (for RP) Male Metric Thread (for RG) Female BSPP (For RP) Male BSPP (For RG) Fractional Tube Nut+Gasket+ Fractional Bulge Nipple Nut+Gasket+ Metric Bulge Nipple / " or mm M or mm /" or mm M.5 or mm L B E P T N VP T TP Valve Valve with Plug Thread Thread with Plug Valve with Plug PV Plug Valve NB Needle Valve NF Needle Valve Plug Thread No drain FNS NS FRT RT FMS MS FRP BP FL ML UFB UMB Female NPT Male NPT Female BSPT Male BSPT Female Metric Thread (for RP) Male Metric Thread (for RG) Female BSPP (For RP) Male BSPP (For RG) Fractional Tube Nut+Gasket+ Fractional Bulge Nipple Nut+Gasket+ Metric Bulge Nipple None / " or mm M or mm /" or mm M.5 or mm S NO NACE MR075 C F J M F Black Aluminum Bar Red Aluminum Bar Green Aluminum Bar Blue Aluminum Bar Stainless Steel Bar FC-0 FC-0 Cleaning and Packaging: FC-0: Standard cleaning and packaging for general industrial procedures. FC-0: Special cleaning and packaging for wetted system components to ensure compliance with product cleaning requirement as stated in ASTM G9 Level C.

27 9 50 Manifolds / Air Headers and Distribution CM CM - FNS - FNSP - T - C - SF Cleaning and Packaging Special Application Type Size Handle Drain Plug Drain Type/Size Va lv e/plug Quantity Inlet Size Inlet Type Body FC-0 NO Black Aluminum Bar / Female NPT NO " / / FNS Female NPT Female NPT FNS FC-0 F NACE MR075 S Red Aluminum Bar C /"Female NPT * Valve with Plug P / " or M Female BSPT FRT / Female BSPT FRT 0 Green Aluminum Bar "Female NPT " / FMS F Female Metric Thread (for RP) * Female BSPP (For RP) FRP M Blue Aluminum Bar FRP J Female BSPP (For RP) /" or M.5 Stainless Steel Bar PS M M.5 Pipe Socket Weld Plug Thread T..... Note: * only applies to maximum working pressure up to 000 PSI. "" is used for composition rules of FITOK product model, Not suitable for specific product part number selection, not random combinations. If in doubt, please contact FITOK group or authorized agent. Cleaning and Packaging: FC-0: Standard cleaning and packaging for general industrial procedures. FC-0: Special cleaning and packaging for wetted system components to ensure compliance with product cleaning requirement as stated in ASTM G9 Level C. Block and Bleed Valves Element Features Ball Valves Working pressure up to: 000 psig ( bar) Working temperature: PTFE: -5 F to 50 F (-5 C to PEEK: -5 F to 50 F (-5 C to C ) Bottom-loaded stem prevents stem blowout and enhances system safety. High-strength stem bearings provide smooth actuation and eliminate galling between the valve stem and body. FITOK ball valves are designed to be operated in a fully open or fully closed position. Needle Valves Working pressure up to: 000 psig ( bar) Working temperature: PTFE: -5 F to 50 F (-5 C to Graphite: -5 F to 00 F (-5 C to 9 Two stems design. The upper stem has hardened threads, the lower stem has hardened smooth surface. Upper stem thread lubricant is isolated from system media. The lower stem performs vertical linear movement instead of screwing movement, significantly reducing the friction area. The nonrotating lower stem eliminates galling between the seat and tip. Stem back seating seals in the fully open position Double lock-pins enable steady and durable fastening of the handle. Manifolds / Block and Bleed 0L Pipe Socket Weld PS L Valve with Plug Pipe Butt Weld PB PV Plug Valve L NB Needle Valve B NF Needle Valve E Plug P Thread T No drain N CM S L L

28 5 5 OS & Y Needle Valves Flange Single Block and Bleed Valves Manifolds / Block and Bleed Working pressure up to: 000 psig ( bar) Working temperature: PTFE: -5 F to 50 F (-5 C to Graphite: -5 F to 00 F (-5 C to 9 Two-stem design: thread hardened upper stem and smooth surface hardened lower stem. Upper stem thread lubricant is isolated from system fluid. The nonrotating lower stem, linearly instead of helical movement, avoids galling damage to the seat and tip, as well as reduces the total friction area between the packing and the lower stem. Bolted bonnet enhance strength and reliability. Adjustable gland flange allows easy access to the packing gland and packing adjustment for an effective stem seal. Investment case yoke is formed by precision casting which BB -BN-FM00-FNS-V BB -BB-FM00-FNS-V BB -BN-FM00-V BB -BB-FM00-V Manifolds / Block and Bleed enhances strength and perfect stem alignment. Two handle pins make the handle fixed firmly and lastingly. Root Single Block and Bleed Valves Handle colors indicate functions: Needle and OS & Y valves: Black = Isolate/Block Ball valves: Yellow=Isolate/Block Red =/Bleed Red =/Bleed BB -BN-RV-FNS-V BB -BO-RV-FNS-V BB -ON-RV-FNS-V BB -NN-RV-FNS-V Single Block and Bleed Valves - BB Instrument Single Block and Bleed Valves BB -BB-FNS-C BB -BN-FNS-V BB -NN-NS-FNS-H Monoflange Single Block and Bleed Valves BB -ON-MM0-FNS-V BB -NN-MM0-FNS-V BB -ON-MM0-FNS-V BB -NN-MM0-FNS-V

29 5 5 Manifolds / Block and Bleed Double Block Valves - DB Monoflange Double Block Valves DB -ON-MM00-FNS DB -NN-MM00-FNS Single Block Valves - SB Monoflange Single Block Valves SB -O-MM00-FNS SB -N-MM00-FNS Flange Double Block and Bleed Valves DBB -BBN-FM00-V DBB -BBN-FM00-FNS-V DBB -OON-FM00-V DBB -OON-FM00-FNS-V Manifolds / Block and Bleed Double Block and Bleed Valves - DBB Large-Bore Bolted Double Block and Bleed Valves Instrument Double Block and Bleed Valves DBB -BBN-FM0-V-F DBB -BBN-FM0-V-R DBB -BBB-FNS-V-L DBB -NNN-NS-FNS-V-V DBB -NBN-FNS-V-H Root Double Block and Bleed Valves DBB -BBN-FNS-V-V DBB -BBB-FNS-V-C DBB -BBN-RV-FNS-V DBB -BBO-RV-FNS-V DBB -OON-RV-FNS-V DBB -NNN-RV-FNS-V

30 55 5 Monoflange Double Block and Bleed Valves Manifolds-Block / and and Bleed Bleed DBB DBB -ONN-MM00-FNS-V DBB -ONN-MM00-BWE-V DBB Injection Double Block and Bleed Valves DBB -BBN-FMS-FE50-IN -NNN-MM00-FNS-V DBB -NNN-MM00-BWE-V DBB -ONN-MM00-FNS-V-X DBB -ONN-MM00-BWE-V-X I Sampling Double Block and Bleed Valves DBB DBB -BBN-FMS-FE50-SA -NNN-MM00-FNS-V-X -NNN-MM00-BWE-V-X DBB - BBO - FM0 - FNS - V - RPSF - IE Special Function Cleaning and Packaging Special Application Packing/ Sealing Body Style/ Function Type and Size Number Pressure Ratings Type Size Pressure Ratings Options of Configuration Ball Valve Inlet Type Inlet Size Orifice Options of Needle Valve Orifice Body FC-0 No Flange and Root pattern / Female NPT with plug Same as inlet /" V Primary Secondary Bleed FC-0 F NACE MR 075 S / or mm " No Needle Vavles Configuration Single Block and Bleed BB Compact pattern C No Ball FNS Female NPT Vavles Configuration NS Male NPT FRT Female BSPT Needle Needle Needle NNN Valves in-line mounted L / Female NPT with plug V / " or mm Male BSPT RT Needle Ball Needle NBN Double Block DB No Class ML /" ( mm) Needle Ball Ball BBN 0." ( mm) PTFE Fire safe Valves vertically mounted V mm Ball Ball Ball BBB One Fire safe (it does not apply to the manifold whose vavles are all needle vavles Class 50 Single Block SB / or mm " FL 50 /" ( mm) Needle OS&Y OS&Y OON 0.5" (. mm) PEEK P Valves horizontally mounted H Two s Class mm Female Metric Thread (for RP) FMS /" (0 mm) OS&Y Ball Ball BBO 0.9" ( mm) Class 00 Double Block and Bleed DBB Graphite G Needle Needle OS&Y ONN Male Metric Thread (for RG) MS Ball Ball BB Class 900 Needle Needle Class 500 Nut+Gasket+Metric Bulge Nipple UMB NN Needle Needle Anti-static E Full-bore three piece bolted mounted Reduced-bore three piece bolted mounted F 00 or mm " " (5. mm) 900 /" or M0 x.5 0 R 500 /". mm) ( Fire safe and Anti-static Class RF Smooth Flange FM Needle Ball BN IE Block/Block/Bleed X RTJ Flange FJ L L PN /" " " " 5 (50. mm) OS&Y Ball BO SA application Sampling Needle OS&Y CS Carbon Steel PN RF Smooth Monoflange MM ON IN Injection application Needle OS&Y D5 Duplex 05 PN RTJ Monoflange MJ OS&Y O Root Valve Plain End RV 90L 90L PN Needle N PN 5 5 PN 0 0 PN PN 0 0 PN Note: "" is used for composition rules of FITOK product model, Not suitable for specific product part number selection, not random combinations. If in doubt, please contact group or authorized agent. FITOK Manifolds / Block and Bleed

31 57 5 Manifolds / Gauge Valves Gauge Valves GV series and GVH series working temperature: PTFE packing: -5 F to 50 F (-5 C to Graphite packing: -5 F to 00 F (-5 C to 9 GR series working temperature: Acetal seat: -0 F to 50 F (- C to PEEK seat: -0 F to 00 F (- C to 0 PFA seat: -0 F to 00 F (- C to 0 Non-rotating lower stem, ball tip and plug tip designs Variety of materials for seat and packing Safety back seating seals in fully open position Rolled spindle operating threads Lubricant for stem thread isolated from the media Externally adjustable gland Bonnet locking pin fitted as standard Low torque operating T bar handle Option for different colored handles Steady and durable fastening of the handle by double lock-pins Working pressure up to: Stainless steel: GV, GR up to 000 psig ( bar) GVH up to 000 psig (90 bar) Leak-tight performance testing for every valve with nitrogen at the maximum working pressure Ball Tip Design Valves (GV, GVH) Plug Tip Design Valves (GR) GR - NS - FNS - CPW - GR - SF Cleaning and Packaging Special Application Packing Handle Seal Tip Body Style Size Type Inlet Size FC-0 NO Black Aluminum Bar GV PTFE Same as Body Same as Body Graphite G Stellite W GV Standard Type Same as Inlet /" Stellite GR PTFE Duplex 05 D5 Miniature Type /" FC-0 F NACE MR075 S Red Aluminum Bar C R Acetal TI Titanium Gr. GR Specify in the same way as inlet type and size M0 x.5 0 Extended Type E Stainless Steel Bar M A0 Alloy 0 PEEK PFA P F Black Knob O INC Alloy 00 HC Alloy C-7 Note: "" is used for composition rules of FITOK product model, Not suitable for specific product part number selection, not random combinations. If in doubt, please contact group or authorized agent. FITOK Manifolds / Gauge Valves GV GVH GR -NS-FNS -NS-FNS -NS-FNS GV GVH GR -NS-FNS-E -NS-FNS-E -NS-FNS-E GV GVH GR -NS-FNS-C -NS-FNS-C -NS-FNS-C Body Inlet Type FNS Female NPT GV NS Male NPT L L Ball Tip Design GVH Female BSPT FRT 0 S Male BSPT RT 0L L Plug Tip Design GR Female ISO (for RP) FMS S Male ISO (for RG) MS Duplex 05 D5 Female BSPP (for RP) FRP Titanium Gr. TI Alloy 0 A0 Alloy 00 M Alloy 00 INC Alloy C-7 HC Brass B Carbon Steel CS 90L 90L

32 59 0 Manifolds / Instrumentation Manifolds Instrumentation Manifolds Working temperature: PTFE packing: -5 F to 50 F (-5 C to Graphite packing: -5 F to 00 F (-5 C to 9 Orifice: 0.57 " (.0 mm), CV: 0.5 Working pressure up to: Stainless steel: D, R, D, R, 5D, 5R up to 000 psig ( bar) DH, RH, DH, RH, 5DH, 5RH up to 000 psig (90 bar) Alloy C-7: D, R, D, R, 5D, 5R up to 000 psig ( bar) Two-stem design: thread hardened upper stem and smooth surface hardened lower stem Upper stem thread lubricant isolated from system media Linear instead of helical movement of the nonrotating lower stem avoids galling damage to the seat and tip, as well as reduces the total friction area between the packing and the lower stem Safety back seating seals in fully open position Steady and durable fastening of the handle by double lock-pins Leak-tight performance testing for every valve with nitrogen at the maximum working pressure R -FNS-NS-H R -FNS-V Flow Diagram Instrument Isolate Test/ The standard configuration of direct mount manifolds contain PTFE flange seal ring and 7/-0 UNF.75" high tensile bolts. -Valve Manifolds D -FNS-A D -FNS-L-T R -FNS-V Flow Diagram Manifolds / Instrumentation Manifolds Instrument Plug Equalize Plug Isolate Isolate Handle colors indicate functions: Black=lsolate/Block Red =Test/ Green=Equalize The standard configuration of direct mount manifolds contain PTFE flange seal ring and 7/-0 UNF.75" high tensile bolts. -Valve Manifolds 5-Valve Manifolds D -FNS-A D -FNS-L D -FNS-H 5D -FNS-A 5R -FNS-L Flow Diagram Instrument Equalize Test/ Isolate Test/ R -FNS-A R -FNS-C R -FNS-L 5D -FNS-B 5R -FNS-B Flow Diagram Instrument Plug Plug Equalize Equalize Isolate Isolate The standard configuration of direct mount manifolds contain PTFE flange seal ring and 7/-0 UNF.75" high tensile bolts.

33 Manifolds / Instrumentation Manifolds Instrumentation Integral Manifolds C Integral Manifold is specifically designed for the pressure transmitters of Rosemount coplanar, including Model 05C, 05P, 0 and 095. D -FNS-C D -FNS-C 5D -FNS-C Isolate Instrument P T Test/ Plug Isolate Instrument D P Equalize Plug Isolate Test/ Instrument D P Equalize Isolate Test/ The standard configuration of direct mount manifolds contain PTFE flange seal ring and 7/-0 UNF.75" high tensile bolts. The auxiliary installation for FITOK manifolds and transmitters of different brands Model of FITOK Manifolds Model of Transmitters (5)DXX-XX-X (5)RXX-FXXX-X DXX-XXX-X RXX-FXXX-X Rosemount Transmitters 05 CD X X ( 5 7 ) X X X X A 05 CD X X 0 X X X X H (H H H7 HJ) A 05 CD X X 0 X X X X HK A 05 CD X X 0 X X X X HL A 05 CD X X X X X X X DF A5 A 05 CG (CA) X X ( 5 7 ) X X X X A 05 CG (CA) X X 0 X X X X H (H H H7 HJ) A 05 CG (CA) X X 0 X X X X HK A 05 CG (CA) X X 0 X X X X HL A 05 CG (CA) X X X X X X X DF A5 A Manifolds / Instrumentation Manifolds Manifold Mounting Brackets 5 D (H) P ( 5) X XX XX 5 A (G) P ( 5) X XX XX A A -MP-BK.".5" (0.0) (7.0).5" (90.0).7" (9.5) " (5.) -MP-BK.7" (9.5).5" (90.0).7" (9.5) 0.9" (.0).5" (9.0) 5.7" (5.0) 5 D (H) P X X XX XX DF EJA Transmitters EJAX0A-XXX0 (5) X-XXXX EJAX0A-XXX ( ) X-XXXX EJA ( 5) X0A-XXX0 (5) X-XXXX EJA ( 5) X0A-XXX ( ) X-XXXX Honeywelly Transmitters STDXXX-XXA-XXX STDXXX-XXH-XXX A5 A A5 A A5 A A A A A5 A.7" (.0).75" (70.0).5" (.0)." (0) 0.79" (0.0)." (0) STXXXX-XXG-XXX STGXXX-XXA-XXX SMXXXX-XXA-XXX A A5 A A.7" (9.5)." (5.0).5" (5.0) 0.79" (0.0) SMXXXX-XXH-XXX SIEMENS Transmitters A5 A -MP-BK -MP-BK 7MFX-XXX0 () X-XXXX 7MFX-XXX () X-XXXX A A A A 7MF (5) X-XXX0 () X-XXXX A Kidney and Eccentric Flanges 7MF (5) X-XXX ( 7) X-XXXX 7MF (5) X-XXX (5) X-XXXX A A Kidney Flange Eccentric Flange." (.).5" (.)." () 0.0" (.)." (.).5" (.)." () Remark: A: Connecting with fittings A: Connecting with flange and sealing rings, using 7/ - 0 x.75" bolts A: Connecting with flange and sealing rings, using M x 0 mm bolts A: Connecting with flange and sealing rings, using M x 0 mm bolts A: Connecting with flange and sealing rings, using 7/ - 0 x " bolts A5: Remove the kidney flanges and then connect with flange and sealing rings

34 Manifolds / Instrument Manifolds D - FNS - LG - TYM - SF Cleaning and Packaging Special Application For direct mount only Flange Centerline Bolt NO type: Flanged D Y Yes R type: Same as Inlet Specified in the same way as the inlet type and size 5 -valve -valve 5-valve No /" / Female NPT with Relief Valve T / " or mm / Female NPT with Plug / " or mm P mm / " or mm mm mm M0 x.5 0 Manifold Mounting Bracket Test Ports & Plugs Packing Sealing Body Style Type Size Inlet Size Inlet Type Mount Type Body Flange Fasteners FC-0 NO PTFE Angle Pattern A Female NPT FNS FRT G Graphite Double equalize Function B Female BSPT Metric Tube ML Compact Pattern C Fractional Tube FL Valves In-Line Mounted L Female Metric Thread (for RP) FMS Valves Horizontally Mounted H UMB Valves Vertically Mounted V Nut+Gasket +Metric Bulge Nipple Flanged F L. " (5 mm) S L S D5 TI FC-0 A0 F M INC NACE MR075 HC S B 5.9 " (55. mm) CS 7/ - 0 UNF x.75" 7/ - 0 UNF x " 90L L 0 0L Duplex 05 Titanium Gr. Alloy 0 Alloy 00 Alloy 00 Alloy C-7 Brass Carbon Steel 90L 57.5 " (57. mm) M x 0 mm M x 0 mm Zinc Plated Carbon Steel M Note: "" is used for composition rules of FITOK product model, Not suitable for specific product part number selection, not random combinations. If in doubt, please contact group or authorized agent. FITOK Filters Tee-type Filters FT Filter element replaceable without removing body from system Union bonnet design Nominal pore sizes for sintered element: 0.5,, 7, 5, 0, 0 and 0 μm Nominal pore sizes for strainer element: 0, 50, 50 and 50 μm Working pressure up to: 000 psig ( bar) Working temperature: -0 F to 900 F (- C to Body materials:, L, 0, 0L, 90L and Brass Variety of end connections available Inlet Filters D DH R RH Direct Mount Remote Mount

35 5 Filters Bypass Filters FB Bypass port at filter bottom for the ease of sampling or purging Union bonnet design Nominal pore sizes for sintered element: 0.5,, 7, 5, 0, 0 and 0 μm Nominal pore sizes for strainer element: 0, 50, 50 and 50 μm Working pressure up to: 000 psig ( bar) Working temperature: -0 F to 900 F (- C to Body materials:, L, 0, 0L, 90L and Brass Variety of end connections available In-line Filters FI Compact and space-saving design Nominal pore sizes for sintered element: 0.5,, 7, 5, 0, 0 and 0 μm Nominal pore sizes for strainer element: 0, 50, 50 and 50 μm Working pressure up to: 000 psig (07 bar) Working temperature: -0 F to 900 F (- C to Body materials:, L, 0, 0L,, 90L and Brass Variety of end connections available All-welded In-line Filters FW Large filtration area and high flow coefficient All-welded construction for elimination of leakage Easy cleaning of filters by backflushing Full-penetration weld between body and element Nominal pore sizes for sintered element: 0.5,, 7, 5, 0, 0 and 0 μm Working pressure up to: 000 psig ( bar) Working temperature: -0 F to 900 F (- C to Body materials:, L, 0, 0L and 90L Variety of end connections available Inlet Inlet Inlet Bypass Port Filters FB - FL - ML - S -P 50 - FLSF Cleaning and Packaging Special Application Bypass Port (for FB Only) Element Nominal Pore Size Gasket Element Type Size Type Inlet Size Inlet Type Body FC-0 NO / Female NPT 0.5 μm 05 Silver-plated for FT, FB, FI Sintered Same as Inlet /" Female NPT FNS FT FC-0 F NACE MR075 S /" Fractional Tube μm Strainer S /" 7 μm PTFE-plated for FT, FB, FI P Specified in the same way as the inlet type and size Male NPT NS L L FL FB Female BSPT FRT 7 / " or mm 0 S /" Fractional Tube FI FL Male BSPT RT 5 μ m 5 Aluminum for FT, FB, FI A / or mm " 0L L FW / Tube Socket Weld " TS Female Metric Thread (for RP) FMS 0 μ m 0 mm S /" Fractional Tube FL 0 μ m 0 No-plated for FT, FB, FI W / " or mm Male Metric Thread (for RG) MS B Brass /" Fractional Tube FL 0 μ m 0 mm or M x.5 Female BSPP (for RP) FRP 90L 90L 0 μ m 0 " or mm Male BSPP (for RG) BP 50 μ m 50 mm FL 50 μ m 50 / " or 0 mm or M0 x.5 0 ML 50 μ m 50 mm or M x.5 Socket Weld TS 5 mm 5 Butt Weld TB Male FR FR Note: "" is used for composition rules of FITOK product model, Not suitable for specific product part number selection, not random combinations. If in doubt, please contact group or authorized agent. FITOK Filters

36 7 Hoses and Connectors Hoses and Connectors Metal Flexible Hose Assemblies MH, MM Core tube and fitting material: stainless steel Overbraid material: 0 stainless steel Working pressure up to: 0 psig ( bar) Hose sizes: /" to " Working temperature: -5 F to 00 F (-00 C to C ) End connections: / to thread /" to " and mm to mm tube fitting Welded fitting-to-hose construction to ensure reliable seal Standard and custom-length available Multipurpose Push-on Hose Assemblies MP Cover: weather-, abrasion-, and oil-resistant synthetic rubber Reinforcement: single-braid high-strength synthetic fiber woven for maximum strength and end connection retention Core tube: highly oil-resistant rubber Hose colors: blue, black, green, gray, red and yellow Working pressure up to: 00 psig (0.7 bar) Hose sizes: / " to /" Working temperature: -0 F to 90 F (-0 C to End connections: / to / thread / " to / " and mm to mm tube fitting End connection materials: stainless steel and brass End connections reusable Standard and custom-length assemblies Hoses and Connectors PTFE-lined, Stainless Steel Braided Hose Assemblies PS Hose Lightweight construction for easy handling and installation Core tube material: smooth virgin PTFE Overbraid material: 0 stainless steel Working pressure up to: 000 psig (07 bar) Hose sizes: / " to " Working temperature: -5 F to 00 F (-5 C to 0 End connections: / to thread / " to " and mm to mm tube fitting Standard and custom-length available Hose MP - - F - BK Nominal Hose Size Overall Length Hose Color MP /" (.mm) FXX XX in. Blue Thermoplastic Hose Assemblies TH /" (9.5 mm) /" (.7 mm) /" (9.0 mm) MXX XX mm BK RD GR GY Black Red Green Gray Cover: polyurethane for resistance to oil, weather and abrasion Reinforcement: double-braid high-strength synthetic fiber Core tube: nylon Working pressure up to: 5000 psig (5 bar) Hose sizes: / " to " Working temperature: -0 F to 00 F (-0 C to 9 End connections: / to thread / " to " and mm to mm tube fitting End connection materials: stainless steel, brass, and carbon steel Standard and custom-length available Example: MP--F0-BK MP: Hose series : Hose size is / " F0: Overall length is 0" BK: Hose color is black YW Yellow Note: "" is used for composition rules of FITOK product model, Not suitable for specific product part number selection, not random combinations. If in doubt, please contact FITOK group or authorized agent.

37 9 70 Hoses and Connectors - MH - ML - NS - F - BK - PF Cleaning and Packaging Only PS Option Only PS Hose Color Only MP Overall Length End Connection Type and Size End Connection Size End Connection Type FNS Female NPT /" Same as End FXX XX in. Blue P Clear PVC Cover FC-0 FC-0 F 0 Stainless Steel Spring Guard Hoses and Connectors End Connection Hose SP Black BK Hose ID /" (. mm) / " ( 9.5 mm ) (.7 mm ) /" XX mm ( 9. mm ) " (5. mm) MXX S S A0 INC 0 Alloy 0 / " or mm Alloy 00 HC Alloy C-7 TI Titanium Male NPT NS Red RD Specify in the same way as End Connection Type and Size Female BSPT FRT 5/ " or mm Male BSPT RT / " or mm FMS M x.5 " or mm MS M x.5 FL M0 x.5 0 Metric Tube ML Fractional Tube Adapter FT Adapter MT MH MM PS MP TH / or mm " Green GR Gray GY Female Metric Thread (for RG gasket) YW Yellow Male Metric Thread (for RG gasket) Note: "" is used for composition rules of FITOK product model, Not suitable for specific product part number selection, not random combinations. If in doubt, please contact. Options and accessories do not change hose technical data. Hose operating parameters must be considered when selecting a cover.. Clear PVC cover resists abrasion.. 0 stainless steel spring guard covers entire hose to protect against kinking and abrasion..to order a hose assembly with special cleaning and packaging (FC-0), following ASTM G9 level C, add -F as a suffix to the ordering number. o Male JIC 7 Flare AN o Female JIC 7 Flare Swivel SAN Female Metric Thread Swivel (for MRG) SMS Male NPT Swivel SNS Male BSPT Swivel SRT Female BSPP Swivel ( for RG ) SRG Example: -PS-FT-F-F. End and end follow the orders and regulations below:. Metric Double Ferrules - Fractional Double Ferrules - Adapters - Fractional Tube Adapters - NPT Threads - BSPT Threads - BSPP Threads - SAE/MS Parallel Threads - 7 Flare - Others. Put the sizes from the biggest down to the smallest if they are of the same type.. Put the female bofore male if they are of the same type and size. Hose Connectors, Adapters, and Sleeves HC S End Connection 0 A0 Alloy 0 INC HC TI AL 90L For connecting with soft plastic or rubber tubing Working pressure and temperature range is higher than the corresponding connecting hose. Stainless steel or brass material Shank design for secure holding of tubing inside diameter Hose connectors reusable Alloy 00 Alloy C-7 Titanium Aluminum 90L HC End Connection Type F M Fractional Metric - HC - F - NS End Connection Size End Connection Type End Connection Size /" or mm ML /" / " or mm / " or mm 5/ " or mm / " or mm " or mm FL MT FT FNS NS FRT RT FMS MS Adapter Adapter Female NPT Male NPT Female BSPT Male BSPT Female Metric Thread (for RG gasket) /" Male Metric Thread (for RG gasket) 0 / " or mm / " or mm 5/ " or mm / " or mm " or mm M x.5 M0 x.5 group or authorized agent. FITOK Note: "" is used for composition rules of FITOK product model, Not suitable for specific product part number selection, not random combinations. If in doubt, please contact FITOK group or authorized agent.

38 7 7 Quick-connects Quick-connects QC Working pressure up to: 000 psig (07 bar) Working temperature: - F to 00 F (- C to 0 with Fluorocarbon FKM seal - F to 50 F (- C to with Buna N seal s: stainless steel or brass End connections: / to / NPT, /" to /" and mm to mm tube fitting and /" to /" hose connectors Reliable, leak-tight O-ring seals for vacuum or pressure systems Mix-interchangeable with other main brands Single-end shutoff, double-end shutoff and full-flow quick-connects available Simple push-to-connect coupling for quick and easy operation Sturdy locking mechanism with large contact area to ensure reliable stem retainment QF B Brass QC /" (. mm) QC /" (9.5 mm) QC /" (.7 mm) FNS NS FRT RT FMS MS FL ML End Connection Type Female NPT Male NPT Female BSPT Male BSPT Female Metric Thread (for RG gasket) Male Metric Thread (for RG gasket) - QC - FL - S - K - CE End Connection Size 0 /" /" or mm / " or mm 5/" or mm /" or mm M x.5 " or mm M x.5 M0 x.5 S D B F Stem or Body Stem without valve remains open when uncoupled Stem with valve shuts off when uncoupled Body with valve shuts off when uncoupled Full-flow body Key Number and Color K K K K K5 K K7 K Without key Black Orange Green Yellow Blue White Purple Brown Special Application CE NO NACE MR 075 Quick-connects Working pressure up to: 000 psig ( bar) Working temperature: - F to 00 F (- C to 0 with Fluorocarbon FKM seal - F to 50 F (- C to with Buna N seal s: stainless steel, carbon steel and brass End connections: / to NPT, /" to " and mm to mm tube fitting Full flow Quick, easy operation Smooth, open bores without valving on either end to minimize pressure drop and allow easy cleaning FT MT AN Adapter Adapter Male JIC 7 Flare Note: "" is used for composition rules of FITOK product model, Not suitable for specific product part number selection, not random combinations. If in doubt, please contact FITOK group or authorized agent. QV Working pressure up to: 000 psig (7 bar) Working temperature: - F to 00 F (- C to 0 with Fluorocarbon FKM seal - F to 50 F (- C to with Buna N seal s: stainless steel, carbon steel and brass End connections: / to NPT and BSPT Double-end shutoff available Durable ball-locking mechanism assures reliable connection Simple push-to-connect coupling for quick and easy operation QM Working pressure up to: 000 psig (7 bar) Working temperature: - F to 00 F (- C to 0 with Fluorocarbon FKM seal - F to 50 F (- C to with Buna N seal s: stainless steel or brass Single-end shutoff, double-end shutoff and full-flow available Quick, easy operation

39 7 7 Condensate Pots and Vessels Condensate Pots and Vessels Condensate Pots CP Working pressure up to: Class 500 Socket weld connection as per ANSI B. Butt welding ends as per ANSI B.9 NPT as per ANSI B.0. taper pipe thread All chambers are factory tested fully prior to shipment Standard material of construction:, 0, carbon steel Pipe schedule: 0, 0,, XXS seamless steel Variety of end connections available Configurations Vessels SV Pressure ratings range class 00 to 500 Outside diameters: NPS and NPS Full-penetration gas tungsten arc-weld construction ensures great strength and leak-tight performance All vessels are cleaned in compliance with FITOK standard clean procedure. The connections are protected with caps or plugs A Each vessels is hydraulic tested with pure water at.5 times the design pressure, and leak-tight tested with nitrogen at its design pressure Configurations CV IV 5 B CV IV A SV B SV 5 C IV A IV - SV - - A - FNS - MTS - MTB - SF Cleaning and Packaging Special Application Connection to Size Connection to Type Body O.D. ANSI Class Configuration Connection Type Connection Size Body FC-0 NO Same as connection /" Female NPT FNS CP Class 00 NPS CP FC-0 SV NPS Class 00 A FRT Female BSPT /" S F NACE MR075 Specified in the same way as the connection type and size L L / " or mm Socket Weld TS B Class S mm Socket Weld 0L MTS A Class L /" or mm B Class S Butt Weld TB mm C CS Carbon Steel Butt Weld MTB " or mm A Pipe Weld Socket PS SV Pipe Butt Weld PB CV FL CV Note: "" is used for composition rules of FITOK product model, Not suitable for specific product part number selection, not random combinations. If in doubt, please contact SV ML SV FT group or authorized agent. FITOK IV MT IV Purge Valve (normative) RB IV IV Condensate Pots and Vessels 5

40 75 7 Sample Cylinders and Accessories Sample Cylinders and Accessories SC Working pressure up to: 5000 psig (5 bar). Volume varies from 0 to 75 cm. 0L and L and alloy 00 stainless steel materials resist intergranular corrosion. Seamless tubing body provides consistent wall thickness, size and capacity. Cylinder inlet ends are /, / and / female NPT connections. Heavy wall end connections provide strength and are flaring-resistent. Full-penetration gas tungsten arc-weld construction provides leak-tight sample containment. MC Working pressure up to: 00 psig (9.0 bar) Capacity:, 5 and 50 cm Single-ended and double-ended designs End connection: connected to /" FITOK tube fittings or welded to /" or /" tubing Corrosion-resistant stainless steel construction Full-penetration butt weld construction L L Type L 0L MC S D Single-ended L - MC - DTS - - F TS End Connection Double-ended TB / " (9.5 mm) 5 Butt Weld FT / " (. mm) Socket Weld / " (9.5 mm) Tube Internal Volume 50 cm 5 cm 50 cm Internal Volume Outage Tube Code Carrying Handle Cap & Plug Internal Cylinder Surface End Connection Working End Type Pressure No NO NO No Special Treatment / Female NPT L SC Psig Single S N -ended L 00 Outage Tube PTFE Coating T 0 Psig 0L L OD / Length 0.7 " H OT07 Cylinder OD.9" to.5" Tube Plug TP / Female NPT N cm 00 cm 500 cm 500 " Cylinder OD.9" and " H Pipe Plug PP Electropolishing E 5000 Psig 50 / Female NPT N Note: "" is used for composition rules of FITOK product model, Not suitable for specific product part number selection, not random combinations. If in doubt, please contact FITOK group or authorized agent. Cleaning and Packaging FC-0 F FC-0 L - SC - DN - T - PC - H - OT F Cleaning and Packaging FC-0 FC-0 F Double -ended D M Alloy 00 cm 0 0 PC Pipe Cap cm EC End Cap cm For Double -ended Only cm cm cm cm cm 75 Note: "" is used for composition rules of FITOK product model, Not suitable for specific product part number selection, not random combinations. If in doubt, please contact group or authorized agent. FITOK Sample Cylinders and Accessories

41 77 7 Tubing Tools Tubing Tools Hand Tube Benders HTB Can bend stainless steel or copper tubing, the outside diameter ranges from /" to /" and mm to mm Roll dies reduce bending force and tube ovality, as compared to conventional slide block design to bending range Manual Presetter Tools MPT For tube fitting installations in close quarters, the presetter tool can make installation easier when paired with the table vice. For /" to " and mm to 5 mm tube fittings Gap Inspection Gauges GIG During initial installation of tube fittings, installer or inspector can use gap inspection gauge to check whether a fitting has been sufficiently tightened and eliminate the latent danger of leakage for the system. For all metal fittings, sizes from / to " and " mm to 5 mm Tubing Tools Ordering Number Tube O.D. Bend Radius HTB-S /" 0.5" HTB- /" 0.75" HTB-5 HTB- 5/" /" 0.9" Simple Individual Sizes Multiple Sizes HTB- / ".5" HTB-M mm 5 mm HTB-M HTB-M HTB-M mm mm mm mm mm Universal Adapters Cases HTB-M-L mm HTB-M-L mm The hand tube bender can not be used for SAF 507 tubing over /" or for medium-pressure tubing. 5 mm Carefully selected adapters, hoses, and gaskets in one case for convenience Customer specified adapters available Tube Cutters Ordering Number: FTC-0, FTC-0,FTC-05 For cutting stainless steel, copper, and aluminum tubing For cutting /" to 5/" and mm to 5 mm outside diameter tubing Tube Deburring Tools Ordering Number: TDT-0,TDT-0,TDT-05 For deburring tubing made from stainless steel, carbon steel, aluminium, and copper materials For deburring / " to /"and mm to 5 mm outside diameter tubing Ordering Numbers: ZR5K-5P: 5 standard pieces inside ZR5K-5PC: 5 customer specified pieces inside ZR5K-0P: 0 standard pieces inside ZR5K-0PC: 0 customer specified pieces inside Hydraulic Presetting Tools Ordering Numbers: HPT-0 (for /" to "and mm to 5 mm tubing) HPT-05 (for /" to " and mm to 50 mm tubing) For installation of /" to " and mm to 50 mm tube fittings Used to install carbon steel, stainless steel, and alloy steel tube fittings Manually operated hydraulic pump, without requirement for power or compressed air Flexible hose connection between the pump and jig to assure easy and comfortable operation Sturdy plastic package for easy carrying Total weight of 7.5 lbs Overall dimensions (without handle) of. in. x 9. in. x 5.9 in.

42 79 0 Other Elements Other Elements Stainless Steel Seamless Tubing Syphons Other Elements Standards Grade /L 0/0L UNS Designation ASTM ASME S0/S S0/S A SA Example: Fractional: L-ST-09--MP-A9 Metric: L-STM-.0-M-MP-A9 Working pressures up to: 000 psig ( bar) Working temperatures up to: 50 F (5, 0 materials are available S0 Configuration Type Example Gaskets and O-rings WS -WS-FNS-MTB Configuration Gasket Type Example RS Gasket CSB-RS- RP Gasket CU-RP- LWS S-LWS-FNS-MTB RG Gasket CU-RG- Configuration O-ring Type Example UWS S-UWS-FNS-MTB 70 durometer NBR BN7-90 durometer FKM VI9-9

43 Other Elements Thermowells and Bosses Cleaning and Packaging Special Application Insertion Length FC-0 NO " ".5.5 Other Elements Bore Diameter 0." 0.5" 0.5" 0.7" 0.55" 0.5" ".5.5 " FC-0 F NACE MR075 S " ".5.5 ".5.5 ".5.5 " 5 5 " 5 5 " " " " ".5.5 ".5.5 " 7 7 " 7 7 " " " " ".5.5 ".5.5 " 9 9 " 9 9 " " " 0 0 " " ".5.5 " " ".5.5 ".5.5 " " ".5.5 ".5".5 Thermowells FITOK thermowells provide reliable heat-transmission performance under high temperature, high pressure, and corrosive conditions Rugged mechanical construction ensures resistance to distortion under sharp temperature fluctuation conditions TW Example: -TW-FNS-NS-ST-- connections: /" to " NPT; other connections available on request Working pressure up to: 000 psig ( bar) Working temperature: -5 F to 00 F (-5 C to 9 TS Example: -TS-FNS-TP--.5 connection: socket weld Working pressure up to: 000 psig ( bar) Working temperature: -5 F to 00 F (-5 C to 9 Straight, stepped, and tapered shank designs are available Standard instrument connection is /" NPT; other connections are available on request s:, 0,, F9, F9, H, carbon steel, brass, titanium, alloy C-7 and alloy 00 TF Example: -TF-FNS-RF50-SP--.5 connection: flange complying with ANSI B.5 Flange sizes: " to " Flange ratings: class 50 to 500 Flange types: raised face and flat face Welded flange-to-body construction TJ Example: -TJ-FNS-TP--. connection: flange Flange complying with ANSI B.5 Working pressure up to: 000 psig ( bar) Working temperature: -5 F to 00 F (-5 C to 9 C ) - TW - FNS - RF50 - ST SF Shank Diameter (ST&SP) and TS Tapered Root Diameter Shank Style ANSI Class Connection Size Connection Type Instrument Connection Size Instrument Connection Type 0.5" ST Straight 50 Class 50 / Male NPT NS / Female NPT FNS Class / 5 0.5" Stepped SP Class Male BSP Tapered RT Female BSPT FRT S 0.75" Tapered TP Class / 0 Raised Face Flange 0 S RF Class / " F Class 500 Flat Face Flange FF TW Thread Thermowells.0" F9 9 Ring Type Joint Flange Flange Thermowells TF.5" 0 RJ H H Socket Weld Thermowells TS.5" Wafer Type Joint Flange LJ Brass B TJ Wafer Flanged Thermowells Carbon Steel CS Titanium TI Alloy C-7 HC Alloy 00/ R-05 M Note: "" is used for composition rules of FITOK product model, not suitable for specific product part number selection, not random combinations. If in doubt, please contact FITOK Group or authorized agent. 90L 90L

44 Other Elements Bosses BS Variety of process connection types and sizes available on request Working pressure up to: 500 psig ( bar) Instrument connections: M x.5 to M x.0, and / to thread s:, 0,, carbon steel, brass, titanium, alloy C-7, and alloy 00/R-05 Example: -BS-FMS Medium & High Pressure s 5 Tube s 5 Tube s BS FNS SF Instrument Connection Type Instrument Connection Size Bore Diameter Wrench Allowance Overall Length Special Cleaning and Application Packaging S S 0 D5 05 BS FNS FMS FRP Female NPT Female Metric thread Female BSPT 7 /" mm or /" mm or " 7 mm mm mm 9 mm mm 7 mm mm 7 mm 5 mm 0 mm mm 0 mm 0 mm mm S NO NACE MR075 F FC-0 FC-0 Pressures up to 5000 psig ( bar) s are easy to disconnect and retighten Every fitting is stamped with size, material and heat code Radius junction design with elbows provides smooth flow path 0 0 mm 5 5 mm Male nut threads are molybdenum disulfide-based lubricant to mm minimize the friction Hardened threads and smoothed surface finishes extend fitting life and prevent sticking of the matching threads Note: "" is used for composition rules of FITOK product model, not suitable for specific product part number selection, not random combinations. If in doubt, please contact FITOK Group or authorized agent. Configuration Type Example Male Connector -CM-FH-NS Female Connector -CF-FH-NS Union -U-FH Reducing Union -U-FH-FH

45 5 5 Tube s Configuration Type Example Bulkhead Union -BU-FH Union Elbow -LU-FH Union Reducing Elbow -LU-FH-FH Male Elbow -LM-FH-NS Union Tee -TTT-FH Male Branch Tee -TTM-FH-NS Union Cross -C-FH Cap -TC-FH Plug -TP-FH Nut Ferrule -N-FH -FE-FH Reducer -R-FH-FM Port Connector -P-FH Adapter -AM-FM-NS - - U - FH - FH - P and P Type P Connection Type P Size P Connection Type P Size Specify in the same way as the P Except the same as the P, the other size follows : Except the same as the P, the other type follows : /" FH Ferrule CM Male Connector /" FM CF Female Connector 7/-0 7 NPT Thread NS /" Union U 9/- SH SAE/MS Straight Thread 9 /" " U Reducing Union 9/" 9 BU Bulkhead Union /" LU Union Elbow LU Union Reducing Elbow Male Elbow LM Union Tee TTT Note: "" is used for composition rules of FITOK product model, not suitable for specific product part number selection, not random combinations. If in doubt, please contact FITOK Group or authorized agent. Male Branch Tee TTM Union Cross C Cap TC TP Plug Nut N FE Ferrule P P, P, P and P shall be described in the following orders: Ferrule - Tube - Others Describe in descending order as per size if the end connection types are the same Describe the end of P if all end connections are the same R Reducer P Port Connector P P AM Adapter P 5 Tube s

46 7 0 Tube s 0 Tube s Pressures up to 0000 psig (79 bar) Coned-and-Threaded Connection Metal-to-metal seal provides perfect leak-tight service from critical vacuum to medium pressure Anti-vibration connection components available s are easy to disconnect and retighten Every fitting is stamped with size, material and heat code Available to NACE MR-0-75 Configuration Type Example 0 Tube s Anti-Vibration Gland Assembly Coned and Threaded Nipple -AVGA-FH9 -CTN-FH- 0 Tube s Configuration Type Example Gland Collar -G-FH -CO-FH Pressures up to 0000 psig (7 bar) Coned-and-Threaded Connection Metal-to-metal seal provides perfect leak-tight service from critical vacuum to high pressure Anti-vibration connection components available s are easy to disconnect and retighten Every fitting is stamped with size, material and heat code Available to NACE MR-0-75 Plug -TP-FH9 Union Coupling -U-FH Configuration Type Example Gland -G-FH Reducing Union Coupling -U-FH-FH Collar -CO-FH Union Coupling (Slip Type) -SU-FH Plug -TP-FH9 Bulkhead Coupling -BU-FH Union Coupling -U-FH Cap -TC-FH Reducing Union Coupling -U-FH-FH Elbow -LU-FH9 Union Coupling (Slip Type) -SU-FH Tee -TTT-FH ØD Bulkhead Coupling -BU-FH Cross -C-FH Cap -TC-FH

47 and 0 Tube s Configuration Type Example Elbow Tee Cross Anti-Vibration Gland Assembly -LU-FH9 -TTT-FH -C-FH -AVGA-FH9 Pipe s Pipe s Coned and Threaded Nipple -CTN-FH- 0 and 0 Tube s - SU - FH The hardened threads with smooth surface avoid galling and help to extend the fitting service life Radius junction design with elbows provides smooth flow path. Every fitting is stamped with size, material, and heat code stainless steel standard material. Other materials are available upon request Available to NACE MR-0-75 Configuration Type Example Type P Connection Type P Size P, P and P Pipe Plug -HPP-NS G CO TP U U Gland Collar Plug Union Coupling Reducing Union Coupling FH FH 0 0 /" /" 9 9/" /" " Specify in the same way as the P Hex Nipple -HPHN-NS SU BU TC LU TTT C AVGA Union Coupling (Slip Type) Bulkhead Coupling Cap Elbow Tee Cross Anti-Vibration Gland Assembly P P P Note: "" is used for composition rules of FITOK product model, not suitable for specific product part P number selection, not random combinations. If in doubt, please contact FITOK group or authorized agent. Hex Long Nipple Pipe Cap -HPLN-NS-50. -HPC-NS CTN Coned and Threaded Nippe P, P, P and P shall be described in the following orders: Describe in descending order as per size if the end connection types are the same Hex Coupling -HPCG-NS Describe the end of P if all end connections are the same

48 9 9 Pipe s Configuration Type Example Zero-Clearance Union Adapter Male Elbow Street Elbow Female Elbow Male Tee Male Street Tee Male Branch Tee Female Tee Female Cross -HPZC-NS -HPA-NS -HPME-NS -HPSE-NS -HPE-NS -HPMT-NS -HPST-NS -HPBT-NS -HPT-NS -HPCR-NS - HPHN - NS - RT - P and P Type P Connection Type P Sizes P Connection Type P Size Specify in the same way as the P Specify in the same way as the P Size Specify in the same way as the P NS and RT Sizes NPT NS Pipe Plugs HPP /" ISO Tapered RT Hex Nipples HPHN / " Hex Long Nipples HPLN / " Heavy-Duty SAE/MS (Accordance with SAE J9-) SH Pipe Caps HPC /" Hex Couplings HPCG Note: "" is used for composition rules of FITOK product model, not suitable for specific product part number selection, not random combinations. If in doubt, please contact FITOK Group or authorized agent. / " Zero-Clearance Unions HPZC " US o-ring Seal SAE/MS(Accordance with SAE J9-) US Adapters HPA SH US and HM Sizes JIC (7 Flare) AN Male Elbows HPME 7/-0 7 AS JIC(7 Flare) Female Swivel AS Street Elbows HPSE 9 / - 9 Female Elbows HPE P Type "M" Male HM / - Male Tees HPMT HPST Male Street Tees 7/- HPBT Male Branch Tees - P P HPT Female Tees 5/- HPCR Female Crosses AN and AS Sizes P 7 / - 0 P,P,P and P shall be described in the following orders: Female thread end is the first if contains For male connections:npt-iso Tapered-Heavy Duty SAE/MS -JIC (7 Flare)-Type"M"Male For female connections:npt-iso Tapered-O-ring Seal SAE/MS-JIC (7 flare) Female Swivel Describe the descending order as per size if the end connection types are the same Describe the end of P if all end connections are the same 9 / - / - 7 / - / - 5 / - Pipe s

49 9 9 Adapters and Couplings Adapters and Couplings Configuration Type 0 Male to Male JIC 0 Male to Type "M" Male 0 Male to 5 Male Example -MMA-MP9-AN -MMA-MP-HM9 -MMA-MP-MP Adapters and Couplings 0 Male to Male 0 -MMA-MP-MP About "CP" 0 Male to Male 0 -MMA-MP9-MP Every fitting is stamped with size, material, and heat code The hardened threads with smooth surface finishing avoid galling and help to extend the fitting service life stainless steel is standard material. Other materials are available upon request Available to NACE MR-0-75 Ordering number with designator " CP" is for "two-piece" male to male and female to male adapters. They are identical to the "onepiece" designs in length can be ordered by substituting "CP" for "MP" to the "one-piece" adapter part numbers listed. Example: Ordering number of "one-piece": -MMA-MP-MP The corresponding ordering number of "two-piece" is -MMA-CP-CP. 0 Male to Male NPT Thread 0 Male to Male JIC -MMA-MP-NS -MMA-MP-AN Configuration Type Example 0 Male to Type "M" Male -MMA-MP-HM 5 Male to Male 5 5 Male to Male NPT Thread -MMA-MP-MP -MMA-MP-NS Type "M" Male to 0 Coned and Threaded Nipples Type "M" Male to 0 Coned and Threaded Nipples -MMA-HM9-CT -MMA-HM9-CT9 5 Male to Male JIC -MMA-MP-AN 5 Male to Type "M" Male -MMA-MP-HM9 0 Female to 5 Female -FFC-FH-FH 0 Male to 5 Male -MMA-MP-MP 0 Female to NPT Thread Female -FFC-FH-NS 0 Male to Male 0 -MMA-MP9-MP 0 Female to 5 Female -FFC-FH-FH 0 Male to Male NPT Thread -MMA-MP9-NS 0 Female to 0 Female -FFC-FH-FH

50 95 9 Adapters and Couplings Configuration Type Example 0 Female to Female NPT Thread 5 Female to 5 Male 5 Female to 0 Male -FFC-FH-NS -FMA-FH-MP -FMA-FH-MP Configuration Type Example 0 Female to 0 Male 0 Female to Male NPT Thread 0 Female to Type "M" Male -FMA-FH-MP -FMA-FH-NS -FMA-FH-HM9 Adapters and Couplings 5 Female to 0 Coned and Threaded Nipples -FMA-FH-CT Female NPT Thread to 5 Male -FMA-NS-MP 5 Female to 0 Male -FMA-FH-MP Female NPT Thread to 0 Male -FMA-NS-MP 5 Female to 0 Coned and Threaded Nipples -FMA-FH-CT9 Female NPT Thread to 0 Coned and Threaded Nipples -FMA-NS-CT 5 Female to Type "M" Male -FMA-FH-HM9 Female NPT Thread to 0 Male -FMA-NS-MP 0 Female to 5 Male -FMA-FH9-MP Female NPT Thread to 0 Coned and Threaded Nipples -FMA-NS-CT 0 Female to 0 Male -FMA-FH-MP9 0 Female to 0 Male -FMA-FH9-MP 0 Female to Male NPT Thread -FMA-FH9-NS 0 Female to Type "M" Male -FMA-FH9-HM9 0 Female to 5 Male -FMA-FH-MP 0 Female to 0 Male -FMA-FH9-MP

51 97 9 Adapters and Couplings - MMA - MP - NS P Size Type P Connection Type P Size P Connection Type Except the same as the P, the other size follows: Except the same as the P, the other type follows: NS Size NPT NS Male to Male MMA /" Female to Female FFC CT Size 0 Coned and Threaded Nipples 5 Male CT / " MP and CP Female to Male FMA /- CT / " /- 0 Coned and Threaded Nipples 0 Male /" MP and CP 9/- 9 Male JIC AN / " /- 0 Male " MP and CP - MP, CP and FH Sizes 5 Female FH CT Size /- 0 Female FH /- / Female FH /- 5 / - Type "M" Male HM 9/- 9 /- AN Size MP, CP and FH Sizes 7 / -0 7 / -0 9 / - 9 / - /- / - 9 7/- / - Note: "" is used for composition rules of FITOK product model, not suitable for specific product part number selection, not random combinations. If in doubt, please contact FITOK Group or authorized agent. /- / - 5/- MP, CP and FH Sizes P P 9 / - / - / - 9 P and P shall be described in the following orders: HM Size For fitting type MMA: MP -MP -MP -NS -AN -HM -CT -CT 9/- 9 For fitting type FFC: FH -FH -FH -NS /- For fitting type FMA: Female connection type is the first 7/- Describe the descending order as per size if the end connection - types are the same 5/- Describe the end of P if all end connection are the same Non-rotating stem and bar stock body design Easy to assemble and replace packing Medium & High Pressure Valves Needle Valves Metal-to-metal seating achieves ideal shutoff, longer stem/seat service lifetime for abrasive flow, excellent corrosion resistance and greater durability for repeated on/off cycles The standard packing material for 0N is Nylon, the other is PTFE. RPTFE glass, Graphite and extend stuffing box with Graphite are also available N Needle Valves End connections: 9/", /", " tube fittings and / NPT, / BSPT, NPT, BSPT Body material: Orifice sizes: 0.59", 0.5", 0.", 0." and 0.5" Working pressure up to: 000 psig (90 bar) Working temperature: -0 F to 00 F (-7 C to 9 Extended stuffing box with of Graphite can be operated to 00 F (9 The location of packing is under the thread of upper stem. The material of packing gland and lower stem have been selected to achieve reduced handle torque and extended thread cycle life Options for Vee or Regulating stem tips Five flow patterns are available Available to NACE MR N Needle Valves End connections: /", /", /", /" tube fittings and / NPT, / BSPT, / NPT, / BSPT, / NPT, / BSPT, / NPT, / BSPT Body material: Orifice sizes: 0.09", 0.", 0.50", 0.75", 0.07", 0.0", 0.9" and 0." Working pressure up to: 5000 psig ( bar) Working temperature: -0 F to 00 F (-7 C to 7 Needle Valves

52 99 0 0N Needle Valves 0N Needle Valves Needle Valves End connections: /", /", 9/", /" and " tube fittings Body material: Orifice sizes: 0.5", 0.9", 0.", 0." and 0.5" Working pressure up to: 0000 psig (79 bar) Working temperature: -0 F to 00 F (-7 C to 9 End connections: /", /" and 9/" tube fittings Body material: Orifice sizes: 0.09" and 0.5" Working pressure up to: 0000 psig (0 bar) Working temperature: -0 F to 00 F (-7 C to 9 N Body Connection For N 5N - FH - RG Size /" Stem Tips Packing Flow Patterns Vee PTFE Straight Needle Valves 5N 0N 0N 0N FH FNS FH FNS FH 0 NPT(Female) For 5N 5 NPT(Female) For 0N 0 9 /" /" /" 9/" /" " R Regulating TG G HT Nylon (0N Only) RPTFE Glass Graphite extended stuffing box with Graphite 5 Angle Angle(replaceable seat) -way/ on pressure -way/ on pressure -way/ stem manifold For 0N/0N FH 0 Note: "" is used for composition rules of FITOK product model, not suitable for specific product part number selection, not random combinations. If in doubt, please contact FITOK Group or authorized agent. 0N Needle Valves End connections: /", /", 9/" tube fittings Body material: Orifice sizes: 0.0 " and 0.07" Working pressure up to: 0000 psig (7 bar) Working temperature: -0 F to 00 F (-7 C to 9

53 Ball Valves Ball Valves Ball Valves Shut-Off One-piece, trunnion mounted style, ideal for severe duty applications Two-way and three-way valve configurations PEEK seats offer excellent resistance to chemicals, heat, and wear/abrasion Full-port flow path minimizes pressure drop Optional O-rings available for high-temperature applications Pneumatic actuator options Switching Turn Diverting 90 Turn B Ball Valves End connections: /" and " tube fittings / and NPT threads Body material: Working pressure up to: 000 psig (90 bar) Orifice sizes: -way: 0.5" -way: 0.5" Fluorocarbon FKM O-ring working temperature: 0 F to 00 F (-7. C to 0 0B Ball Valves End connections: /", /", 9/" and /" tube fittings Body material: Orifice sizes: -way: 0.09" to 0.75" -way: 0.09" to 0.9" Working pressure up to: 0000 psig (79 bar) Fluorocarbon FKM O-ring working temperature: 0 F to 00 F (-7. C to 0 5B Ball Valves End connections: /", /", /", /", 9/" and /" tube fittings /, /, / and / NPT threads Body material: Working pressure up to: 5000 psig ( bar) Orifice sizes: -way: 0.09" to 0.75" -way: 0.09" to 0." Fluorocarbon FKM O-ring working temperature: 0 F to 00 F (-7. C to 0 B 5B 0B 5B - FH N - AO Body Connection Size Orifice No. Body Style O-ring FH FH FNS FH 5 0 NPT(Female) 0 9 /" /" /" /" 9/" /" " /" /" /" /" For -way For -way /" Note:. Operators 90 rotations standard. options available upon request.."" is used for composition rules of FITOK product model, not suitable for specific product part number selection, not random combinations. If in doubt, please contact FITOK Group or authorized agent. /" D -Way Straight Valves -Way Valves, Turn -Way Valves, 90 Turn Code N F E O-ring Fluorocarbon FKM NBR FFKM EPDM N F E Fluorocarbon FKM NBR FFKM EPDM AO AC Pneumatic Actuators None Air-to-open/ spring-to-close Air-to-close/ spring-to-open AOC Double acting Temperature Range 0 to 00 F (-7. to 0-0 to 50 F (-0 to -0 to 500 F (-9 to 0-50 to 00 F (-5 to

54 Check Valves 0C, 0CO Check Valves High Check Pressure Valves Ball Valves End connections: /", /", 9/", /" and " tube fittings Orifice sizes: 0.5", 0.", 0.59", 0.5" and 0." Working pressure up to: 0000 psig (79 bar) Working temperature: 0C Check Valves (O-ring Check Valves): -50 F to 550 F (-5 C to 0CO Check Valves (Ball Check Valves): - F to 00 F (-79 C to 9 0C, 0CO Check Valves 0C (O-ring Check Valves) 0CO (Ball Check Valves) Check Valves End connections: /", /" and 9/" tube fittings Body material: Resilient O-ring seat design for noise-free closing leakage-free Optional O-rings available for high-temperature applications Provides unidirectional flow and tight shut-off for liquid and gases with high reliability. When differential drops below cracking pressure, valve shuts off (Not for use as relief valve) Cracking pressure: C, 5C, 0C and 0C Check Valves: psig~ psig (0.9 bar~.79 bar) Orifice sizes: 0.09", 0.5" and 0.7" Working pressure up to: 0000 psig (7 bar) Working temperature: 0C Check Valves (O-ring Check Valves): -50 F to 550 F (-5 C to 0CO Check Valves (Ball Check Valves): - F to 00 F (-79 C to 9 0C (O-ring Check Valves) Available to NACE MR CO (Ball Check Valves) C, CO Check Valves End connections: / NPT and NPT Orifice sizes: 0.5" and 0.9" 5C - FH Working pressure up to: 000 psig (90 bar) Working temperature: C (Pipe O-ring Check Valves): -50 F to 00 F (-5 C to 0 CO (Ball Check Valves): - F to 00 F (-79 C to 0 C (Pipe O-ring Check Valves) Body Connection Size C For C/CO /" 5C, 5CO Check Valves Working pressure up to: 5000 psig ( bar) End connections: O-ring Check Valves and Ball Check Valves: /", /" and /" tube fittings Pipe O-ring Check Valves and Pipe Ball Check Valves: / NPT, / NPT and / NPT Orifice sizes: O-ring Check Valves and Ball Check Valves: 0.", 0.5" and 0.75" Pipe O-ring Check Valves and Pipe Ball Check Valves: 0.", 0." and 0." Working temperature: 5C (O-ring Check Valves): -50 F to 550 F (-5 C to 5C (Pipe O-ring Check Valves): -50 F to 00 F (-5 C to 0 5CO (Ball Check Valves): - F to 00 F (-79 C to 7 5CO (Pipe Ball Check Valves): - F to 00 F (-79 C to 0 CO (Pipe Ball Check Valves) 5C (O-ring Check Valves) 5CO (Ball Check Valves) CO 5C 5CO 0C 0CO 0C 0CO FNS FH FNS 5 For 0C/0CO FH For 0C/0CO FH NPT(Female) For 5C/5CO NPT(Female) 0 0 Note: "" is used for composition rules of FITOK product model, not suitable for specific product part number selection, not random combinations. If in doubt, please contact FITOK Group or authorized agent. 9 /" /" 9/" /" " Code N F E O-ring Fluorocarbon FKM NBR FFKM EPDM Temperature Range 0 to 00 F (-7. to 0-0 to 50 F (-0 to -0 to 550 F (-9 to -50 to 00 F (-5 to Options: O-ring Fluorocarbon FKM is standard. For other materials, add a material code to the valve ordering number. Example: 0C-FH-K

55 5 Metering Valves Relief Valves Metering Valves The design of Barrel and Thimble micrometer permits repeatable settings Each division of barrel equal to 0.05" Thimble is divided into 5 divisions, each division of thimble equal to 0.00" stem travel One revolution equal to valve stem 0.05" travel Precise Metering valves are not intended for use as shut-off valves The minimum flow rate is factory set at "0"position. The valve will be damaged when the valve operated below "0" position. When shutoff is required, a correlated shutoff valve from 5B, 0B, 5N, 0N, 0N and 0N series valve should be installed series with the Precise Metering Valves The location of packing is under the thread of valve stem Maximum back pressure: 500 psig (.5 bar) Liquid or gas service Pressure settings of HSR and HMR valves are made at the factory and valves are tagged accordingly. State the required set pressure with the order please Pressure settings of HAR valves are adjusted on use s own Lock wired secure cap to maintain set pressure Easily exchangeable replaceable seat Free assembly positions Relief Valves Reliable locking device of packing gland design Extend stuffing box valve with of Graphite can be operated to 00 F (9 End connections: 5M series: /" and /" tube fitting 0M series: /" tube fitting 0M series: /" and /" tube fittings Body material: Orifice sizes: 0.0" Flow coefficient (Cv): 0.0 Working pressure up to: 5M series: 5000 psig ( bar) 0M series: 0000 psig (0 bar) 0M series: 0000 psig (7 bar) Working temperature: -0 F to 00 F (-7 C to 9 HSR Relief Valves connection: / NPT thread Body material: Orifice sizes: 0.5" to 0." Soft seat relief valves Set pressure: 500 to 0000 psig (. to 7.9 bar) Inlet connection: 9/" of 0 series tube fittings Working temperature: F to 00 F (0 C to 0 HMR Relief Valves connection: / NPT thread Body material: Orifice sizes: 0.07" to 0." Metal seat relief valves Set pressure: 000 to 0000 psig (0. to. bar) Inlet connection: 9/" of 0 series tube fittings /" of 0 series tube fittings Working temperature: - F to 500 F (-79 C to 0 HAR Relief Valves connection: / NPT thread Body material: Orifice sizes: 0.09" to 0.97" Field adjustable and soft seat relief Set pressure: 000 to 0000 psig ( 0. to 7.9 bar) Inlet connection: 9/" of 0 series tube fittings valves Working temperature: F to 00 F (0 C to 0 0M - FH - G Body Tube OD Packing 5M 0M 0M FH FH FH /" /" /" TG PTFE Nylon(0M Only) RPTFE Glass FH /" G Graphite HT Extend stuffing box valve with Graphite Note: "" is used for composition rules of FITOK product model, not suitable for specific product part number selection, not random combinations. If in doubt, please contact FITOK Group or authorized agent.

56 7 Relief Valves HMR - FH9 - FNS - Line Filters Line Filters Body Inlet Tube OD Connection Type Grade HSR HMR HAR FH /"(HMR Only) / " NPT FNS FH9 9/" (Female) Note:. Pressure settings are made at the factory and valves are tagged accordingly. State the required set pressure with the order please.. "" is used for composition rules of FITOK product model, not suitable for specific product part number selection, not random combinations. If in doubt, please contact FITOK Group or authorized agent ~5000 psig (~5 bar) 000~5000 psig (07~5 bar) 000~000 psig (07~90 bar) 5000~000 psig (5~90 bar) 000~0000 psig (90~79 bar) 000~5000 psig (90~ bar) 000~0000 psig (90~79 bar) 5000~0000 psig (~79 bar) 0000~0000 psig (79~0 bar) 5000~5000 psig (7~ bar) 0000~0000 psig (0~7 bar) HSR HMR HAR HSR, HMR HAR HMR HSR HMR Dual-disc Line Filters Easy to replace filter element Dual-disc Line Filters are utilized in chemical processing, aerospace, nuclear and other applications The large contaminations particles are filtrated by upstream element. The rest of contaminations particles are filtrate by downstream element Standard size of downstream/upstream nominal pore is 5/,/5 and 5/5 μm. Other element combinations also available on special order Pressure differential not to exceed,000 psig (9 bar) in a flowing condition Cup-type Line Filters The filter elements can be quickly and easily replaced Nominal pore sizes for filter element: 5, 5 and 5 μm Cup-type Line Filters are recommended in high pressure systems requiring both maximum filter surface area and high flow rates. Cup-type Line Filters are widely used in chemical processing and industrial fields. The cup design of this filter offers about six times the effective filter area as compared to disc-type units Pressure differential not to exceed,000 psig (9 bar) in a flowing condition FD, FC Line Filters End connections: / NPT and NPT Body material: Orifice sizes: FD : 0.59" and 0.5" FC : 0.5" and 0." Working pressure up to: 000 psig (90 bar) Working temperature: -0 F to 00 F (-50 C to 0 FD (Dual-disc) FC (Cup-type) 5FD, 5FC Line Filters End connections: /", /", /", /" tube fittings and / NPT, / NPT, / NPT, / NPT Body material: Orifice sizes: 5FD : 0.09", 0.5", 0." and 0." 5FC : 0.5", 0.", 0." and 0." Working pressure up to: 5000 psig ( bar) Working temperature: Tube fittings: -0 F to 0 F (-50 C to 50 NPT thread ends: -0 F to 00 F (-50 C to 0 5FD (Dual-disc) 5FC (Cup-type)

57 9 Line Filters 0FD, 0FC Line Filters End connections: 0FD : 9/" tube fitting 0FC : /", /", 9/", /" and " tube fittings Body material: Orifice sizes: 0FD : 0." 0FC : 0.5", 0.", 0.59", 0.5" and 0." Working pressure up to: 0000 psig (79 bar) Working temperature: -0 F to 0 F (-50 C to 50 0FD, 0FC Line Filters End connections: /", /" and 9/" tube fittings Body material: Orifice sizes: 0FD : 0.09", 0.5" and 0.7" 0FC : 0.09", 0.5" and 0.7" Working pressure up to: 0000 psig (7 bar) Working temperature: -0 F to 0 F (-50 C to 50 0FD (Dual-disc) 0FC (Cup-type) 0FD (Dual-disc) 5 Tubing Working pressures up to psig ( bar) /L and 0/0L stainless steel are standard materials. Other materials are available upon request Medium & High Pressure Tubings Example: : -5T-0-M 0 : S-5T-5-5 Medium & High Pressure Tubings 0FC (Cup-type) 0 Tubing Working pressures up to 0000 psig (79 bar) /L and 0/0L stainless steel are standard materials. Other materials are available upon request Example: : -MT-FH- 0 : S-MT-FH9-M 5FD - FH Tubing FD FC 5FD 5FC 0FD 0FC 0FD 0FC Body Connection For FD/FC FNS NPT(Female) For 5FD/5FC FH FNS 5 NPT(Female) For 0FD/ 0FC FH 0 For 0FD/ 0FC Size /" /" /" /" 9 9/" /" " Norminal Pore Size For FD/5FD/0FD/0FD 05 5/ μm 5 /5 μm 55 5/5 μm For FC/5FC/0FC/0FC 5 5 μm 5 5 μm 5 5 μm Working pressures up to 0000 psig (7 bar) /L and 0/0L stainless steel are standard materials. Other materials are available upon request Example: : -HT-FH-5 0 : S-HT-FH9-M FH 0 Note: "" is used for composition rules of FITOK product model, not suitable for specific product part number selection, not random combinations. If in doubt, please contact FITOK Group or authorized agent.

58 Tools Tools Coning Tools For preparing a "cone" on the 0 and 0 series tubing ends. Manual Presetting Tool Ordering Number PST- PST- Tube O.D. in. / / Tools Tube O.D. x I.D. in. Ordering Number PST- PST- / / / 0.9 HCT-M / 0.0 HCT-M 9/ 0. / 0.0 / 0.5 HCT-M9 HCT-H HCT-H High Pressure Hydraulic Presetting Tools 9/ 0. HCT-H9 Ordering Number Tube O.D. in. Threading Tools For preparing a left hand thread on the 0 and 0 series tubing ends. HPT-HF HPT-H+U /, 9/, / Choose your needs from Die Heads. ex:hpt-h+hpt-h-fh. Tube O.D. in. Ordering Number Thread Size (Left Hand) Die Heads / / 9/ HTT- HTT- HTT-9 /- UNF /- UNF 9/- UNF Ordering Number HPT-H-FH HPT-H-FH9 Tube O.D. in. / 9/ Reseating Tools HPT-H-FH / For repairing the damaged tube connector seats in 0 and 0 series tube fittings and valves. Connection Size in. / / 9/ / Connection Type FH FH FH9 FH Ordering Number HRT-M HRT-M HRT-M9 HRT-M FH HRT-M / / 9/ FH FH FH9 HRT-H HRT-H HRT-H9

59 s / M s Butt Weld s M Sizes range from /" to /" and mm to mm, L, L VAR and L VIM/VAR stainless steel materials are available Butt weld connection allows for a smooth transition Radius junction design with elbows provides smooth flow path. Maximum working temperature is 50 F (5 Standard wetted surface finish is average µin. (0.5 µm) Ra Every fitting is stamped with size, material, and heat code L Sizes range from /" to " and mm to mm L stainless steel materials are standard Butt weld connection allows for a smooth transition Radius junction design with elbows provides smooth flow path Maximum working temperature is 50 F (5 Standard wetted surface finish is average µin. (0.5 µm) Ra Every fitting is stamped with size, material, and heat code Configuration Type Example Reducing Union L-WU-TB-TB s / L Configuration Type Example Union Elbow L-WL-MTB Reducing Union LV-WU-TB-TB Union Tee L-WT-MTB Reducing Tee L-WT-TB-TB-TB 90 Union Elbow LW-WL-MTB Union Cross L-WC-TB Reducing Union Elbow LW-WL-MTB-MTB 5 Union Elbow LW-WV-TB M and L Butt Weld L WU TB TB F Tribow LW-WB-TB Type P Type P Size P, P and P Technology grade Union Tee Reducing Tee LW-WT-MTB LW-WT-TB-TB-TB L LV L L VAR LW L VIM/VAR WU Reducing Union WL Union Elbow WT WV WC WB Union Tee 5 Union Elbow Union Cross Tribow M L P TB MTB P Butt Weld Butt Weld P /" /" /" or mm /" or mm mm /" or mm " or mm mm Specify in the same way as the P F Standard Specification Special Cleaning and packaging F Ultrahigh-purity Specification Standard Specification Special Cleaning and Packaging Ultrahigh-purity Specification Union Cross LW-WC-TB P, P, P and P shall be described in the following orders: Describe in descending order as per size if the end connection types are the same Describe the end of P if all end connections are the same P Note: "" is used for composition rules of FITOK product model, not suitable for specific product part number selection, not random combinations. If in doubt, please contact FITOK Group or authorized agent.

60 5 s / FR Metal Gasket Face Seal s FR Sizes range from /" to " and mm to mm, L, and L VAR stainless steel materials are available Metal-to-metal seal provides perfect leak-tight service from vacuum to high pressure Standard wetted surface finish is average μin. (0.5μm) Ra Glands and bodies are stamped with size, material, and heat code All seal faces and male threads are protected with plastic caps FR female threads are silver plated Configuration Type Example FR Welded Gland Union -WG-FR Female Nut -N-FR s / FR Male Nut -MN-FR Configuration Type Example FR Body to Male NPT -CM-FR-NS FR Gland to Short Tube Butt Weld LV-G-FR-TB-S FR Gland to long Butt Weld LV-G-FR-TB- FR Body to Female NPT -CF-FR-NS FR Gland to Male Weld L-G-FR-TB FR Body to Tube -U-FR-FL FR Gland to Tube Socket Weld -G-FR-TS FR Body to Bulkhead Tube Union -UB-FR-FL FR Gland to Short Tube Socket Weld -G-FR-TS-0.75 FR Body to Bulkhead Male Connector -CMB-FR-NS FR Gland to Tube Port -G-FR-FT Short Fractional Automatic Tube Butt Weld -AG-FR-TB-S Union Body -U-FR Long Fractional Automatic Tube Butt Weld -AG-FR-TB- Bulkhead Union Body -BU-FR Blind Gland -G-FR-B FR Bulkhead Body to Tube Butt Weld -BW-FR-TB FR Welded Gland to Male NPT -WG-FR-NS Coupling -BC-FR FR Welded Gland to Female NPT -WG-FR-FNS Female Reducing Union -RU-FR-FR FR Welded Gland to Tube -WG-FR-FL Reducing Adapter -RA-FR-FR

61 7 s / FR Configuration Type Reducing Bushing FR Body to Male NPT Elbow FR Body Union Elbow FR Body Union Tee FR Body Union Cross "H" Type Union Elbow " H" Plug Cap Gasket Type Tube Butt Weld "H" Type Tube Butt Weld Flow Restrictors Example -RB-FR-FR -LM-FR-NS -LU-FR -TTT-FR -C-FR LUHFR - CWHFRTB - GHFRTB0. - LV-RFR00 - -PG-FR -CP-FR L-GT-FR - LM - FR - NS F Type P Type P Size P Type P Size P and P Technology grade Standard Cleaning and packaging Specify in the same way as the P Except the same as the P, the other size follows : /" Metal Gasket Face FR Seal Metal Gasket Face Seal FR Gland G " / Fractional Double Ferrule Weld Gland WG Special Cleaning and packaging F FL " /" or / L L /" Female Nut N F Ultrahigh-purity FT /" Male Nut L VAR LV /" MN /" Socket Weld TS " Male Connector Body CM /" or mm 7/-0 7 Butt Weld TB Female Connector Body CF mm Butt Weld MTB Union Body U 9/- 9 NPT Thread NS mm Body to Bulkhead Tube Union UB Female NPT Thread FNS /" or /- or mm SAE/MS Straight Thread ST Body to Bulkhead Male Connector CMB /- 7 Blind Body BY mm Bulkhead Union Body BU 5/- Bulkhead Body to Tube Butt Weld BW Coupling BC Body to Tube Socket Weld CW Note: "" is used for composition rules of FITOK product model, not suitable for specific product part number selection, not random combinations. If in doubt, please contact FITOK group or authorized agent. Female Reducing Union RU Reducing Adapter RA Reducing Bushing RB Male Elbow LM Union Elbow LU Union Tee TTT P Union Cross C P,P,P and P shall be described in the following orders: Describe in descending order as per size if the end connection types are the same Describe the end of P if all end connections are the same Plug PG P P Cap CP Gasket GT P s / FR

62 9 0 s / FO O-ring Face Seal s FO Sizes range from /" to " and L stainless steel materials are available O-ring seal provides perfect leak-tight service from vacuum to high pressure Glands and bodies are stamped with size, material, and heat code s are easy to install and maintain FO female threads are silver plated Configuration Type FO Body to Tube FO Body to Automatic Tube Weld Example -U-FO-FL L-CW-FO-TBA s / FO FO Body to Bulkhead Tube Union -UB-FO-FL Configuration Type Example FO Gland to Tube Butt Weld LV-G-FO-TB Blind Body -BY-FO FO Gland to Tube Socket Weld L-G-FO-TS Union Body -U-FO FO Gland to Tube Port -G-FO-FT Bulkhead Union Body -BU-FO FO Gland to Automatic Tube Weld L-G-FO-TBA FO Body to Tube Socket Weld -CW-FO-TS FO Welded Gland to Male NPT -WG-FO-NS FO Welded Gland to Female NPT -WG-FO-FNS FO Body to Male NPT Elbow -LM-FO-NS FO Welded Gland to Tube -WG-FO-FL FO Body to Tube Elbow -LU-FO-FL FO Welded Gland Union -WG-FO FO Body Union Elbow -LU-FO Female Nut -N-FO FO Body Union Tee -TTT-FO Blind Nut -N-FO-B FO Body to Male NPT -CM-FO-NS FO Body to Female NPT -CF-FO-NS

63 s / TFO L-ring Face Seal s TFO Sizes range from /" to " s: Body, gland: L stainless steel Nut: stainless steel Reduced internal entrapment Lubricant-free L-ring seal Tube butt end connections Controlled L-ring extrusion, no overtightening Configuration Type Gland Tube Butt Weld Body Example L-G-TFO-TB L-CW-TFO-TB Valves Diaphragm Valves DQ L VIM-VAR stainless steel body is available Suitable for ultrahigh-purity applications Elgiloy material for strength and corrosion resistance for long cycle life Fully contained PCTFE seat design provides excellent resistance to swelling and contamination Wetted Surface Electropolished, Roughness Ra finished to an average of Ra5 μin.(0. μm) -9 Helium leak tested, maximum leak rate of x std cm /s Low-pressure and high-pressure models Manual or pneumatic actuation Aluminum piston accelerated open/close speed Different handle types and colors are available Can be used in vacuum applications Valves / Diaphragm Valves Manual Actuators Nut L-ring Seal -N-TFO T-GT-TFO Round Quick, quarter-turn actuation Handle with window provides visual indication of open and closed positions OPEN CLOSED Integral Lockout Quick, quarter-turn actuation Lockable in the CLOSED position for safety Handle shape and window indicator provides visual indication of OPEN and CLOSED position Pneumatic Actuator Normally open, " N.O. " marked on the top of the cylinder Normally close, " N.C. " marked on the top of the cylinder

64 Multiport and Elbow Valves Multivalve Manifolds Valves / Diaphragm Valves Designator A B C M N Schematic 5 Flow Path Designator Closed Open a a b 5a b b 5a b b b a a b b a a a a a b a a a a b a D E F G K Schematic Flow Path Closed Open a b a b b b b b b b a a a a a a b b a a a b a b a b a b Designator V W D Schematic OUT OUT IN OUT IN IN IN OUT OUT Flow Path OUT OUT IN OUT IN IN IN OUT Front Side Valves / Diaphragm Valves b b a a End Connections Top Side V and W Multivalve Manifolds D Multivalve Manifold Port Port Port Port Port Port Port 5

65 5 DM Valves / Diaphragm Valves DQLW - TB - TB - MTB - HKZY - F Body Port Type Port Size Port ///5 Type Port ///5 Size Pressure Type Flow Path Actuator / Handle Colour Technology grade Standard Cleaning and packaging Green Round Handle Union H /" Same as port FL DQ Integral Lockout Handle L ports High-Pressure Valves Low-Pressure Valves Black K U A L L Special Cleaning and packaging F White W Specify in the same way as port type and port size /" B ML Yellow Y L VIM-VAR LW F Ultrahigh-purity Pneumatic, Normally closed C C mm Butt Weld TB Blue B D Red R Pneumatic, Normally open O Butt Weld MTB E ports F FR Male FR G Female FR FFR K M Rotatable Male FR RFR ports N V W Multivalve Manifolds D Note: "" is used for composition rules of FITOK product model, not suitable for specific product part number selection, not random combinations. If in doubt, please contact FITOK Group or authorized agent. All-metal containment, packless Repetitive shutoff with fully contained softseat stem tip Position indicator ring for lever handle Manual or penumatic actuation Aluminum piston accelerated open/close speed -9 Helium leak tested, maximum leak rate of x std cm /s Different handle types and colors are available Can be used in vacuum applications Straight Patterns Round Handle Angle Patterns Round Handle Lever Handle CLOSED Lever Handle CLOSED Pneumatic Actuator Valves / Diaphragm Valves

66 7 Pressure Reducing Regulator Valves / Diaphragm Valves DML - FL - NS - T - AL R - SF Technology grade NACE MR075 Handle Colour Actuator/Handle Flow Pattem Stem Tip Size Type Inlet Type Inlet Size Body Standard Cleaning and packaging NO Blue Round Handle Straight PCTFE Same as Inlet /" L L Red R FL DM YES S Angle A PTFE T Special Cleaning and packaging F L Level G Green Handle Polyimide V Yellow Y Specify in the same way as inlet type and inlet size /" ML F Ultrahigh-purity TB White W Pneumatic, Normally Closed Pneumatic, Normally Open mm C Butt Weld / " Butt Weld MTB O Socket Weld TS Socket Weld MTS Male FR FR Note: "" is used for composition rules of FITOK product model, not suitable for specific product part number selection, not random combinations. If in doubt, please contact FITOK Group or authorized agent. Female FR FFR NS Male NPT FNS Female NPT Compact Pressure Reducing Regulator PR Maximum inlet pressure: 500, 000 psig pressure ranges: 0~5, 0~50, 0~0, 0~50, 0~500 psig Working temperature: -0 F~+5 F (-0 C~+7 Flow coefficient (Cv): 500 psig Inlet pressure: psig Inlet pressure: 0.0 Leak rate: Internal: Bubble-tight - External: x atm cc/sec He Convoluted diaphragm provides accurate pressure adjustment Metal-to-metal diaphragm seal Spring loaded pressure reducing regulator A filter installed in inlet Panel mounting available Valves / Pressure Reducing Regulator

67 9 Extremely Sensitive Pressure Reducing Regulator Two Stage Pressure Reducing Regulator Valves / Pressure Reducing Regulator PS Maximum inlet pressure: 500, 000 psig pressure ranges: 0~5, 0~50, 0~0, 0~50, 0~00 psig Flow coefficient (Cv): 500 psig Inlet pressure: psig Inlet pressure: 0.0 Working temperature: -0 F~+5 F (-0 C~+7 Leak rate: Internal: Bubble-tight - External: x atm cc/sec He Large convoluted diaphragm for extreme sensitivity Metal-to-metal diaphragm seal Extreme sensitivity: ±% of outlet pressure range Good repeatability A filter installed in inlet Panel mounting available PD Maximum inlet pressure: 000 psig pressure ranges: 0~5, 0~50, 0~0, 0~50, 0~50 psig Flow coefficient (Cv):0.05 Working temperature: -0 F~+5 F (-0 C~+7 Leak rate: Internal: Bubble-tight - External: x atm cc/sec He Accurate and stable outlet pressure Two-stage pressure reducing construction Diaphragms are convoluted for greater accuracy and sensitivity Filter installed in inlet Panel mounting available High Flow Pressure Reducing Regulator Valves / Pressure Reducing Regulator PL Medium Flow Pressure Reducing Regulator PM Maximum inlet pressure: 500, 000 psig pressure ranges: 0~5, 0~50, 0~0, 0~50, 0~00 psig Flow coefficient (Cv):.0 Working temperature: -0 F~+ F (-0 C~+0 Leak rate: Internal: Bubble-tight - External: x atm cc/sec He Large diameter convoluted diaphragm for increased pressure sensitivity Metal-to-metal diaphragm seal Maximum inlet pressure: 500 psig pressure ranges: 0~5, 0~0, 0~75, 0~50 psig Flow coefficient (Cv):. Working temperature: -0 F~+5 F (-0 C~+7 Leak rate: Internal: Bubble-tight - External: x atm cc/sec He Large diameter convoluted diaphragm for increased pressure sensitivity Metal-to-metal diaphragm seal Large flow, minimal droop Panel mounting available Large flow, minimal droop Panel mounting available Porting configurations General High Pressure Reducing Regulator PH Types: A, B, C, D, E, F, all ports are /" Female NPT. HP: High pressure inlet LP: Low pressure outlet Maximum inlet pressure: 000, 000 psig pressure ranges: 0~50, 0~500, 0~500, 0~500 psig Flow coefficient (Cv): Non-vent: 0.0 : 0. Working temperature: -5 F~+5 F (- C~+7 Leak rate: Internal: Bubble-tight External: Bubble-tight Robust piston sensed design A filter installed in inlet ing model optional Panel mounting available LP LP LP LP HP HP LP HP LP HP A B C LP HP HP LP HP LP HP LP HP LP LP D E F

68 Valves / Pressure Reducing Regulator PRL - E5WP - ML - FNS - VZR - F Cleaning and Packing Relief Valve Panel Seat material Size Body s Ports Inlet Pressure Pressure Inlet Gauge Gauge Inlet Type Inlet Size Type FC-0 NO NO PCTFE Same as inlet type and size /" Female NPT FNS Without Gauge W 0-5 p sig PR In Out A L L PR 0-50 p sig 500 psig FC-0 F YES R Panel nut Z Vespel V /" Male NPT NS With Gauge (Mpa) M 5 In Out B PS PR 0-0 p sig Bolts for assembly Fractional Tube 000 psig N /" or mm FL With Gauge ( psig ) P In Out C B Brass PM 0-50 p sig /" or mm ML With Gauge (bar) PS B p sig 5 In Out D PH 500 psig 5 mm In Out E PD /" or mm Cylinder connection and the other fittings are available 0-5 p sig Without Gauge 000 psig W 0-50 p sig In Out F PL PM PS With Gauge M (Mpa) 0-0 p sig 500 psig 5 With Gauge ( psig ) 0-50 p sig P 0-00 p sig psig With Gauge (bar) B 0-5 p sig PH 0-50 p sig 000 psig 5 PM 0-0 p sig 000 psig 0-5 p sig 0-50 p sig PD 0-50 p sig 0-00 p sig psig Note: "" is used for composition rules of FITOK product model, not suitable for specific product part number selection, not random combinations. If in doubt, please contact FITOK Group or authorized agent. PD 0-0 p sig 0-50 psig PL 0-50 p sig psig PH 500 psig p sig psig 0-5 psig psig 0-0 psig PL 0-75 psig 0-50 psig Back Pressure Regulator General Purpose Back Pressure Regulator BPR Maximum control pressure: 50 psig Controlled pressure ranges: 0~5, 0~50, 0~0, 0~50 psig Flow coefficient (Cv): 0. Working temperature: -5 F~+5 F (- C~+7 Leak rate: Internal: Bubble-tight - External: x atm cc/sec He Convoluted diaphragm provides accurate pressure adjustment Metal to metal diaphragm seal Panel mounting available BPH Maximum control pressure: 00 psig Controlled pressure ranges: 0~50, 0~0, 0~00 psig Flow coefficient (Cv): 0. Working temperature: -5 F~+00 F (- C~+9 Leak rate: Bubble-tight Robust piston sensed design Low hand knob torque Panel mounting available Porting configurations Types: A, C, all ports are /" Female NPT. OUTLET A INLET OUTLET C INLET INLET Valves / Back Pressure Regulator

69 BPRL - AW - ML - FNS - KZ - F Cleaning and Packing Inlet Gauge Inlet Type Inlet Size Type Size Seat Panel FC-0 NO Viton R Same as inlet type and size /" Changeover System CEPR Maximum inlet pressure: 000 psig pressure ranges: 5~5, 5~5, 5~5, 5~5 psig Flow coefficient (Cv): 0.0 Working Temperature: -0 F~+5 F (-0 C~+7 Leak rate: Internal: Bubble-tight External: - x atm cc/sec He Based on FITOK s PR series regulator Mounting bracket standard DPPR Maximum inlet pressure: 000 psig pressure ranges: 0~5, 0~50, 0~0, 0~50 psig Flow coefficient (Cv): 0.0 Working temperature: -0 F~+5 F (-0 C~+7 Leak rate: Internal: Bubble-tight - External: x atm cc/sec He Based on FITOK s PR series regulator Mounting bracket standard Changeover System Body Ports BPR L L A In Out BPH C In Out B Female NPT FNS FC-0 Z YES F K Kalrez /" Brass Male NPT NS /" or mm FL ML Controlled pressure 0-5 psig 0-50 psig 0-0 psig BPR 0-50 psig 0-50 psig With Gauge (Mpa) 0-0 psig M Fractional Tube / " or mm The others are available BPH 0-00 psig R Valves / Back Pressure Regulator W Without Gauge With Gauge ( psig ) P With Gauge (bar) B Note: "" is used for composition rules of FITOK product model, not suitable for specific product part number selection, not random combinations. If in doubt, please contact FITOK Group or authorized agent.