Back Pressure Regulators
|
|
- Alban Cooper
- 5 years ago
- Views:
Transcription
1 Back Pressure Regulators BPR-1, BPR- and BPR-3 Series
2 01 Back Pressure Regulators Back Pressure Regulators BPR-1 Series Back Pressure Diaphragm Regulators Features Metal-to-metal seal with convoluted diaphragm Close pressure differential between crack and reseat Panel mounting available Technical Data Maximum control pressure: 50 psig Pressure control range: 0~ 5, 0~ 50, 0~ 100 or 0~ 50 psig Temperature: -15 F ~+165 F (-6 C~+ 74 C) Material of the main components: Seat: PCTFE Diaphragm: Hastelloy Leak rates: Internal: Bubble-tight -9 External: 1x10 mbar l/s helium Flow coefficient (Cv): 0.3 Weight: 1.98 lbs (0.9 kg) Body ports: 1/4" female for inlet, outlet and gauge Model: BPR-16L Typical Flow Chart Controlled Pressure - psig ( bar ) 300 ( 0.7) 50 ( 17.) 00 ( 13.8) 150 ( 10.3) 100 ( 7.0) Control Pressure - psig (bar) ( 3.5) ( 141) ( 80 ) ( 44) ( 566 ) ( 707) ( 850 ) ( 990) ( 113 ) ( 173) ( 1415) Flow Rate - SCFM (SLPM) Nitrogen
3 Back Pressure Regulators 0 Dimensions Dimensions, in inches (millimeters), are for reference only..16 (54.8) Panel Cut-out 1.38 (35) 4.84~5.8 (13~ 134) Panel (Ref.) 0.5 (6.3) Max. Thickness 0.75 (19.1) (50.3) Bottom View Bottom Panel Cut-out (.) 0. (5.5) (.) M H thread The holes are compatible with 10-3 mounting screws
4 03 Back Pressure Regulators Port Configurations Inlet (Gauge) Outlet 1 Inlet Outlet 3 1 Inlet -Port Type 3-Port Type Typical Application When the system pressure is lower than the set pressure, the diaphragm obstructs the flow by the force of spring. When the system pressure is higher than the set pressure, the diaphragm compresses the inner spring to connect the flow so as to allow the fluid to pass through the back pressure regulator to keep the pressure of the Storage Vessel stable. Back Pressure Regulator Storage Vessel Pump
5 Back Pressure Regulators 04 Part Number Description BPR - 16L M - 11 Body Material Pressure Control Range P Connection Connection 3 6L 316L SS SS 316 SS B Brass (Nickelplated) ~5 psig 0~50 psig 0~100 psig 0~50 psig /4" Male 1/4" Tube 3/8" Tube 6 mm Tube 8 mm Tube Other connections are available upon request B M P With Gauge ( psi/ bar) With Gauge (MPa) Plug 1/4" Male 1/4" Tube Other connections are available upon request Same as Examples of part number: a. -port type (1 in, 1 out): BPR-16L
6 05 Back Pressure Regulators Back Pressure Regulators BPR- Series Back Pressure Piston Regulators Features Durable piston-sensed design Bubble-tight shutoff at all reseating pressure Low operating torque Panel mounting available With special cleaning and packaging, applicable to oxygen-enriched environments Technical Data Maximum control pressure: 1000 psig Pressure control range: 50~300, 100~500 or 00~1000 psig Material of the main components: Piston: 316L O-rings: Viton or Kalrez Temperature: -15 F~+165 F (-6 C~+74 C) Leak rates: Internal: Bubble-tight External: Bubble-tight Flow coefficient (Cv): 0.3 Weight: 1.98 lbs (0.9 kg) Body ports: 1/4" female for inlet, outlet and gauge Model: BPR-6LZ Typical Flow Chart 700 ( 48.3) Control Pressure - psig (bar) Controlled Pressure - psig ( bar ) 600 ( 41.4) 500 ( 34.4) 400 ( 7.6) 300 ( 0.7) 00 ( 13.8) 100 ( 7.0) ( 566) ( 113 ) ( 1700) ( 65 ) ( 830) ( 3398 ) ( 3964) ( 4530 ) ( 5097) ( 5663) Flow Rate - SCFM (SLPM) Nitrogen
7 Back Pressure Regulators 06 Dimensions Dimensions, in inches (millimeters), are for reference only..16 (54.8) Panel Cut-out 1.38 (35) 4.84~5.8 (13~ 134) Panel (Ref.) 0.5 (6.3) Max. Thickness 0.75 (19.1) (50.3) Bottom View Bottom Panel Cut-out (.) 0. (5.5) (.) M H thread The holes are compatible with 10-3 mounting screws
8 07 Back Pressure Regulators Port Configurations Inlet (Gauge) Outlet 1 Inlet Outlet 3 1 Inlet -Port Type 3-Port Type Typical Application BPR- Series Back Pressure Regulators maintain the required pipeline pressure to ensure the Pump to output fluid stably when system pressure fluctuates. Back Pressure Regulator Body Material Process Reservoir Pump
9 Back Pressure Regulators 08 Part Number Description BPR - 6L Z M - 11 Body Material Pressure Control Range P Connection Connection 3 6L SS B Z 316L SS 316 SS Brass (Nickelplated) O-ring Material Viton Kalrez ~300 psig 100~500 psig 00~1000 psig /4" Male 1/4" Tube 3/8" Tube 6 mm Tube 8 mm Tube Other connections are available upon request B M P With Gauge ( psi/ bar) With Gauge (MPa) Plug 1/4" Male 1/4" Tube Other connections are available upon request Same as Examples of part number: a. -port type (1 in, 1 out): BPR-SS
10 08 Back Pressure Regulators Back Pressure Regulators BPR-3 Series Back Pressure Piston Regulators Features Control of back-pressure up to psig for gas or liquid application Safe and reliable piston sensing 7 pressure control ranges Panel mounting available Special cleaning and packaging available for application in oxygen-enriched environments Technical Data Maximum control pressure: Stainless steel: psig Brass: 6000 psig Pressure control ranges: 5~500, 5~800, 10~1500, 15~500, 5~4000, 50~6000, 00~10000 psig Material of the main components: Body: 316 SS or brass Seat: PEEK Piston: 316L O-rings: Viton or Kalrez Temperature: -15 F~+165 F (-6 ~+74 ) Leak rates: Internal: Bubble-tight External: Bubble-tight Flow coefficient (Cv): 0.5 Weight: 5.7 lbs (.6 Kg) Body ports: 1/4" female for inlet, outlet, and gauge Model: BPR-3SS Typical Flow Chart Controlled Pressur e - psig (bar) 9000 (61) 8000 (55) 7000 (483) 6000 (414) 5000 (345) 4000 (76) 3000 (07) 000 (138) 1000 (69.0) Control Pressure - psig 5~500 10~ ~ ~ (80) (566) 30 (850) 40 (113) (1415) (1700) Flow Rate - SCFM (SLPM) Nitrogen
11 Back Pressure Regulators 09 Dimensions Dimensions, in inches (millimeters), are for reference only (78.0) 6.74 (171.) Panel(Ref.) 0.5(6.3 ) Max.Thickness Panel Cut-out.80(71.1).(56.4) x 0.8(7.1) 1/4 " Female 1/4 " Female 0.76 (19.3).30(58.5) Bottom View xm6x1 thread (4.08)103.7
12 10 Back Pressure Regulators Port Configurations Inlet(Gauge) Inlet(Gauge) Outlet 3 1 Inlet Outlet 3 1 Inlet Outlet 3 1 Inlet 4 -Port Type 3-Port Type 4-Port Type Inlet Part Number Description BPR - 3B Z B Z - F Body Material SS 6L B Z 316 SS 316L SS Brass( Max. Control Pressure 6000 psig) O-ring Material Viton Kalrez 5 5~500 psig Pressure Control Range P 5~800 psig 10~1500 psig 15~500 psig 5~4000 psig 50~6000 psig ~10000 psig /4" Male 10 1/4" Tube 3/8" Tube 11 6 mm Tube mm Tube Other connections are available upon request B M P Connection With Gauge (psi/bar) With Gauge (MPa) Plug 1/4" Female 1/4" Male 1/4" Tube 3/8" Tube 6 mm Tube 8 mm Tube Connection 3 Same as Connection 4 Same as Panel Mount z Without With Product Technology Grade F General Purpose Special Cleaning and Packaging Other connections are available upon request Examples of part number: a. -Port type (1 in, 1 out): BPR-3B b. 3-Port type ( in, 1 out): BPR-3B M-00 C. 4-Port type (3 in, 1 out): BPR-3B M-00-00
13 FITOK Group FITOK GmbH (Headquarter) Sprendlinger Landstr. 115, Offenbach am Main, Germany Tel.: Fax: FITOK, Inc North Promenade Blvd., Suite 750, Stafford, Texas 77477, USA Tel.: Fax: FITOK Incorporated Block C, Zone E, Yingtai lndustrial Park, Dalang Street, Longhua New District, Shenzhen, , China Tel.: Fax: FITOK Middle East Oil Equipment Trading LLC 08-09, Makateb Building, Airport Road, P.O.Box 18541, Deira, Dubai, UAE Tel.: Fax: info@fitokgroup.com FK-IC-S-01-V-04-EN-16108
Gauge Valves and Instrumentation Manifolds
Gauge Valves and ation Manifolds GV, GVH, GR Series 2-valve, 3-valve and 5-valve Manifold Series FITOK Group FITOK GmbH (Headquarter) Sprendlinger Landstr. 5, 6369 Offenbach am Main, Germany Tel.: +49
More informationAir Headers and Distribution Manifolds
Air Headers and Manifolds A, M, M and FIOK Group FIOK GmbH (Headquarter) prendlinger Landstr, 9 Offenbach am Main, Germany el: +9 9 9 9 Fax: +9 9 9 9 FIOK, Inc orth romenade Blvd, uite 7, tafford, exas
More informationGermany USA. China UAE FITOK Group.
USA Germany UAE China FITOK Group FITOK GmbH (Headquarter) Sprendlinger Landstr. 115, 63069 Offenbach am Main, Germany Tel.: +49 69 8900 4498 Fax: +49 69 8900 4495 FITOK, Inc. 13843 North Promenade Blvd.,
More informationUSA FITOK Group.
USA Germany UAE China FITOK Group FITOK GmbH (Headquarter) Sprendlinger Landstr. 115, 63069 Offenbach am Main, Germany Tel.: +49 69 8900 4498 Fax: +49 69 8900 4495 FITOK, Inc. 13843 North Promenade Blvd.,
More information60 Series Tube Fittings and Tubing
60 Series Fittings and ubing 60,000 psi (4137 bar) FIOK Group FIOK GmbH (Headquarter) Sprendlinger andstr. 115, 63069 Offenbach am Main, Germany el.: +49 69 8900 4498 Fax: +49 69 8900 4495 FIOK, Inc. 13843
More informationQuick-connects. QC, QF, QV and QM Series.
Quick-connects QC, Q, QV and QM ITOK Group ITOK Gmb (eadquarter) Sprendlinger andstr. 5, 309 Offenbach am Main, Germany Tel.: +9 9 900 9 ax: +9 9 900 95 ITOK, Inc. 33 North Promenade lvd., Suite 750, Stafford,
More information10 Series Tube Fittings and Tubing
0 Series ube ittings and ubing 0,000 psi (690 bar) IOK roup IOK mbh (Headquarter) Sprendlinger andstr. 5, 63069 Offenbach am Main, ermany el.: +49 69 900 449 ax: +49 69 900 4495 IOK, Inc. 343 North romenade
More informationO-Rings. Back pressure may be required to reseal the valves with nominal cracking pressure of 5psi or lower.
Check Valves SPCV Series Features Fixed cracking pressure. Pressure rating up to 3000 psig @70 (21 ) Temperature rating up to 375 (191 ) with Viton O-Ring. Variety of end connections available. Every valve
More informationCheck Valves, Filters and Relief Valves
Check Valves, Filters and Relief Valves Catalog 4135-CV December 2010 Series Check Valves Catalog 4135-CV Introduction Parker Series Check Valves are designed for uni-directional flow control of fluids
More informationMetal Gasket Face Seal Fittings
Metal Gasket ace Seal ittings Series IOK Group IOK GmbH (Headquarter) Sprendlinger andstr. 5, 63069 Offenbach am Main, Germany el.: +49 69 8900 4498 ax: +49 69 8900 4495 IOK, Inc. 3843 North romenade lvd.,
More informationFlow Limit Safety Shutoff Valves Model 1
Flow Limit Safety Shutoff Valves Model 1 Model 1 Series flow limit safety shutoff valves automatically shutoff all flow from the cylinder when flow exceeds a factory preset level. The Model 1 is normally
More informationEvans SS-G & GXL -Series Integrated Stainless Gas Sticks
SS-G & GXL -Series Integrated Stainless Gas Sticks Features G & GXL Series 316SS CF8M Body Construction Cleaned and packaged in cleanroom 2-PC Design G-series allows for isolation and removal of regulator
More informationPressure Regulators K Series
www.swagelok.com Pressure Regulators K Series Pressure-reducing models Back-pressure models Gas cylinder changeover model Vaporizing models Pressure Regulators, K Series 2 Swagelok K Series Pressure Regulator
More informationSERIES. CRYOGENIC/PRESSURE BUILD REGULATOR 3/8 and 1/2" NPT, BSPT Inlet 400 Psig (28 Bar) Description
CRYOGENIC/PRESSURE BUILD REGULATOR 3/8 and 1/2" NPT, BSPT Inlet 400 Psig (28 Bar) CR Description The Generant Series CR Cryogenic Regulator provides high flow during Cryogenic Vessel Pressure Build function
More informationEvans G-Series Integrated Gas Sticks
Evans G-Series Integrated Gas Sticks G-SERIES CFOS Stick Features Series CV GS 0.14 GM 1. GL 1.80 Working Pressure 0 psig (34.5 Bar) 0 psig (34.5 Bar) 0 psig (34.5 Bar) Operating Temperature - F to 1 F
More information120 SERIES ONE PIECE TYPE
120 SERIES ONE PIECE TYPE SBV 120H Series Features Simple design with one piece body Tight and smooth, low torque and easy operation One-piece ball stem Panel mountable Variety of End Connections Straight,
More informationPackless Valves. Instrument / Analyzer Products. Catalog 4515/USA April 2006
Packless Valves Instrument / Analyzer Products Catalog 4515/UA April 2006 NV55 eries Catalog 4515/UA NV55 eries High Flow Diaphragm Valves Parker Hannifin Corporation s presents the NV55. The NV55 is an
More informationT205VB Series Tank Blanketing Vacuum Breakers
February 2014 T205VB Series Tank Blanketing Vacuum Breakers Figure 1. Typical T205VB Series Vacuum Breaker Introduction The T205VB Series vacuum breakers (Figure 1) are used for precise control of small
More informationSECTION Pressure & Temperature Control
16 Pressure & Temperature Control ARMSTRONG PRODUCT CATALOGUE 70 Pressure Reducing s Pressure Reducing s Armstrong pressure reducing valves (PRVs) and temperature regulators help you manage steam, air
More informationSeries Regulators - Pressure Reducing
Regulators - Pressure Reducing D26100538X012 Specifications For other materials or modifications, please consult TESCOM. Operating Parameters Pressure rating per criteria of ANSI/ASME B31.3 Maximum Inlet
More informationMedium and High Pressure Product Presentation
Medium and High Pressure Product Presentation www.fitokgroup.com 2016 1 Contents 1. Applications 2. Medium and High Pressure Fittings 3. Tubing 4. Medium and High Pressure Valves 5. Filters 6. Quick Couplings
More informationFLOW CONTROLLERS Instrument/Analyzer Products. Catalog 4513/USA April 2003
FLOW CONTROLLERS Instrument/Analyzer Products Catalog 4513/USA April 2003 FLOW CONTROLLERS Instrument/Analyzer Products Catalog 4513/USA April 2003 table of contents SC420 Series............. 1-2 SC423XL
More informationINSTRUMENTATION - valves
Top grade, precision valves of different types (ball, needle, check valves and many other) used in control and measuring equipment for chemical, petrochemical, pharmaceutical and power industry, nuclear
More informationneedle valves Needle Valves
Needle Valves Index At a Glance 1 1700 Series 5 Forged Body, Integral Bonnet Needle Valves 2100 Series 8 Bar Stock, Screwed Bonnet Needle Valves 2200 Series 12 Bar Stock, Screwed Bonnet Needle Valves 2219
More informationneedle valves Needle Valves
Needle Valves Index At a Glance 1 1700 Series 5 Forged Body, Integral Bonnet Needle Valves 2100 Series 8 Bar Stock, Screwed Bonnet Needle Valves 2200 Series 12 Bar Stock, Screwed Bonnet Needle Valves 2219
More informationGeneral Specifications
General Specifications GS 22B01C52-01EN-A M-650, M-750 and M-651 3-Valve Manifolds for Differential Pressure INTRODUCTION The PGI 3-Valve manifolds are designed for mounting on differential pressure transmitters
More informationLX SERIES Low-Pressure Gas Compressors
70 to 140 psig Inlet Pressure Pressure 1500 PSI 70 80 90 100 110 120 130 140 C1.5-03-70/140LX 3 3.7 4.2 4.6 5.0 5.5 5.9 6.4 6.8 C1.5-05-70/140LX 5 6.1 6.8 7.6 8.3 9.0 9.7 10.4 11.1 C1.5-10-70/140LX 10
More informationLX-SERIES Low-Pressure Gas Compressors
70 to 140 psi Inlet Pressure Pressure 1500 PSI 70 80 90 100 110 120 130 140 C1.5-03-70/140LX 3 3.9 4.4 5.0 5.4 5.8 6.3 6.9 7.3 C1.5-05-70/140LX 5 6.4 7.2 8.1 8.7 9.4 10.3 11.3 11.9 C1.5-10-70/140LX 10
More informationIntegral Bonnet Bar Stock Needle Valves
Integral Bonnet Bar Stock Needle Valves SBNV Series Features Integral bonnet design Bar stock body Compact design Low operating torques Variety of End Connections Straight and Angle flow patterns Each
More informationCASH VALVES TYPE G-4 PILOT OPERATED PRESSURE REDUCING REGULATOR FOR STEAM, AIR AND GASES
Self-actuating pilot operated pressure reducing valve handling air, gas, and steam and accurate to within 1 /2% up to 3" and 1% for larger sizes. Description The G-4 regulator is a self-actuating pilot
More informationpackless valves Packless Valves Index Bellows & Diaphragm
Packless Valves Bellows & Diaphragm Index 0300 Series (Bellows) 1 4100 Series (Bellows) 4 4200 Series (Bellows) 8 4500 Series (Bellows) 11 4600 Series (Diaphragm) 13 DV1 Series (Diaphragm) 17 HOKE Inc.
More informationpressure regulators Back Pressure Regulators
Back Pressure Regulators Index BP-3 Series 1 BP-6 Series 4 BP-8 Series 7 BP-8LF Series 10 CBP-3 Series 13 LB-1 Series 16 SBPR Series 19 BP-60 Series 22 BP-66 Series 25 GO Regulator 405 Centura Court PO
More informationSolution Partner. Leak - Proof Flow & Control. Check & Relief Valves. W e. s u p p o r t. t h e. i n n o v a t i o n s. o f.
W e. s u p p o r t. t h e i n n o v a t i o n s. o f. c u s t o m e r s eak - Proof Flow & Control The Best Partner for Value Creation Solution Partner Check & Relief Valves Index Check & Relief Valves
More informationScrewed Bonnet Needle Valves. Needle Valves
89 Design & Features Hard (Vee) or Delrin Soft Seat/Tip Orifice sizes from.172 to.438 in. Flow Coefficients (Cv) from.37 to 2.7 Straight or angle flow patterns Optional panel mount Handle options available
More informationGeneral Specifications
General Specifications GS 22B01C53-01EN-A M-675, M-775 and M-678 5-Valve Manifolds for Natural Gas Differential Pressure INTRODUCTION The PGI 5-Valve manifolds are designed for natural gas service and
More informationType 289P Pilot-Operated Relief Valve
Instruction Manual Form 5481 Type 289P February 2012 Type 289P Pilot-Operated Relief Valve W6834 W3167-2 Figure 1. 1 NPT Type 289P Pilot-Operated Relief Valve Figure 2. 2 NPT Type 289P Pilot-Operated Relief
More informationSolution Partner. Leak - Proof Flow & Control. Check & Relief Valves. W e. s u p p o r t. t h e. i n n o v a t i o n s. o f.
W e. s u p p o r t. t h e i n n o v a t i o n s. o f. c u s t o m e r s Leak - Proof Flow & Control The Best Partner for Value Creation Solution Partner Check & Relief Valves 2 Check & Relief Valves Index
More informationCASH VALVES TYPE G-4 PRESSURE REGULATORS
A self-actuating pilot operated pressure reducing valve handling air, gas and steam and accurate to within ½% up to 3" and 1% for sizes to 6 FEATURES Extremely compact design enables use of a smaller regulator.
More information289 Series Relief Valves
Instruction Manual Form 174 89 Series May 013 89 Series Relief Valves! WARNING Failure to follow these instructions or to properly install and maintain this equipment could result in an explosion and/or
More informationSeries 810: 2 Way Angle Body Valves: 1/4 to 3 NPT
Series 810: 2 Way Angle Body Valves: 1/4 to 3 NPT FEATURES Compact design, high fl ow rates Visual position indicator standard For temperatures from 22 F to +430 F / -30 C to 221 C Working pressures up
More informationType T205B Balanced Tank Blanketing Regulator
April 2014 Type T205B Balanced Tank Blanketing Regulator Figure 1. Type T205B Balanced Tank Blanketing Regulator Contents Introduction...2 Specifications...2 Features...3 Principle of Operation...3 Installation...4
More informationTY-FLO 3 Piece Ball Valves
TY-FLO 3 Piece Ball Valves 3 PIECE BALL VALVES TY-FLO 3 Piece Ball Valves D 1 ASME B16.34 Compliant FeaTUreS 3-Piece, 8-Bolt construction provides superior high pressure performance and ASME B16.34 compliance
More informationCheck valve series. SHCV, SOCV, SOACV, SACV Series. Phone: Fax: Wimbledon Rd.
Check valve series SHCV, SOCV, SOACV, SACV HIGH PRESSURE CHECK VALVES SHCV SERIES Features Pressure rating up to 6,000psig(413bar) at 70 (20 ) Temperature rating up to 375 (190 ) with viton seal standard
More informationInline Adapters are Electro Polished to 10 Ra Max. 2 Valves supplied with Metal to Metal Face Seal connections have
CRYOGENIC RELIEF VALVE (STAINLESS) 1/4" and 1/2" NPT -4 and -8 Metal To Metal Face Seal 1/4" and 1/2" Bi-Lok Dual Ferrule Tube 10-750 Psig (0.69-51.7 Bar) STAINLESSCRV Description The Generant Series Stainless
More informationY610A, Y611A, and Y612A Series Vacuum Service Equipment and Relief Valves
Y610A, Y611A, and Y612A Series Vacuum Service Equipment and Relief Valves July 2013 W1094_1 Figure 1. Type Y610A or Y610AP Vacuum Breaker Introduction The Y610A, Y611A, and Y612A Series devices (Figures
More informationCheck Valve AP64 P.149. Vacuum Generator Vacuum Generator Module Vacuum Generator Module AP7 & 70 AP71 AP72. Flow Switch Flow Switch (For high flow)
Check Valve eries Check Valve AP64 P.149 Vacuum Generator Vacuum Generator Vacuum Generator Module Vacuum Generator Module Flow witch Flow witch Flow witch (For high flow) eries AP7 & 7 AP71 AP72 eries
More informationDirect-Operated Pressure & Temperature Regulating Valves
Direct-Operated & Temperature Regulating Valves Direct-Operated are used for controlling pressure or temperature in a variety of applications. Regulating Valves Page No. Cast Iron 3/8 2 Page No. O Series
More informationDiaphragm Valves. LD Series. Working pressures up to 300 psig (20.6 bar) Shutoff, bulk-gas distribution, and isolation service
www.swagelok.com Diaphragm Valves LD Series Working pressures up to 300 psig (20.6 bar) Shutoff, bulk-gas distribution, and isolation service Cast, forged, and bar stock stainless steel body material 1/4
More informationS Series Technical Data...7 How to Order...8 Dimensions...8 Manifold Dimensions and Part Numbers...9
Miniature Valve Series............................................................3-14 RB Series..................................................................................3-6 Technical Data...................................................................................3
More informationMark 695 Series. Pressure Regulators Mark 695 Piloted Tank Blanketing Regulators. Piloted Tank Blanketing Regulator 3/4"- 1" Optional Features
Mark 695 Series Piloted Tank Blanketing Regulator 3/4"- 1" The Mark 695 Series piloted soft seat regulator was designed specifically to provide accurate pressure control on very low pressure tank blanketing
More informationType HSR Pressure Reducing Regulator for Residential, Commercial, or Industrial Applications
March 2013 Type HSR Pressure Reducing Regulator for Residential, Commercial, or Industrial Applications High Capacity Compact Design High Capacity Internal Relief TYPE HSR ANGLE BODY Globe Bodies Angle
More informationIntroduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas productio
Check Valves (C Series) Catalog 4130-C Revised, July 2004 Introduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas production
More informationPilot-Operated Safety Relief Valves
NUFLO Pilot-Operated Safety Relief Valves Series H In the mid 1940s, a new relief valve actuated with a pilot rather than a spring set a new standard for pressure control. The valve, manufactured over
More informationToggle Valve s. OG, 1G, and 92 Series. Manual and pneumatically actuated models. Straight, angle, and cross body patterns
www.swagelok.com Toggle Valve s OG,, and 92 Series Manual and pneumatically actuated models Straight, angle, and cross body patterns 316 SS and brass body materials Features Compact, rugged design Opens
More information5100 Series Inline Relief Valve 10 to 2,400 PSIG
Fred C. Gilbert Co. 106 Norris Road Bakersfield, Ca. 93308 661-399-9569 fax 661-393-9654 5100 Series Inline Relief Valve 10 to 2,400 PSIG Features Zero Leakage to 95% of Cracking Pressure Positive Reseal
More informationTechnical Data... 3 How to Order... 4 Dimensions... 5 Inline Mount Valve... 6 Manifold Dimensions and Part Numbers... 6
Table of Contents Minature Valve Series...3-14 RB Series...3-6 Technical Data.... 3 How to Order.... 4 Dimensions... 5 Inline Mount Valve.... 6 Manifold Dimensions and Part Numbers... 6 S Series...7-9
More informationIntroduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas productio
Check Valves (CO Series) Catalog 4130-CO Revised, June 2001 Introduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas
More informationMETERING VALVES H1300 SERIES.
METERING VLVES H00 SERIES www.hamlet.com METERING VLVES H00 SERIES H, HF & HXF00 SERIES FETURES Forgedbody St.St.or Brass Construction Straight and Patterns Panel Mounting MWP 000 psig ( bar) MWT 00 F
More informationManifold Valve Accessories
Accessories Manifold Valve Accessories DIELECTRIC KITS The dielectric kit is designed to maintain the integrity and reliability of the pipeline and piping system through safety and corrosion protection.
More informationS, M, L, and 31 Series. Straight-pattern flow coefficients (C v ) from to Low- and high-pressure service
www.swagelok.com Metering Valves S, M, L, and Straight-pattern flow coefficients (C v ) from 0.004 to 0.16 Low- and high-pressure service Repeatable vernier handles available rass and 316 stainless steel
More informationPressure Regulators RHPS Series
Pressure Regulators Series 1 www.swagelok.com Pressure Regulators Series Pressure-reducing models Back-pressure models Spring-, dome-, and air-loaded 1/4 to 4 in. end connections Working pressures up to
More informationBellows-Sealed Valves
www.swagelok.com ellows-sealed Valves Working pressures up to 1000 psig (68.9 bar) Temperatures up to 900 F (482 C) 1/4, 3/8, 1/2, and 3/4 in.; 6, 10, and 12 mm end connections rass, stainless steel, and
More informationmetering valves Metering Valves Index 1300 Series Series Series 8
Metering Valves Index 1300 Series 1 0 Series 300 Series HOKE Inc. PO Box Spartanburg, SC 9305- Phone () 57-79 Fax () 57-50 www.hoke.com Sales-hoke@circor.com metering valves Milli-Mite 1300 Series Forged
More informationHIGH PRESSURE FORGED MULTI PURPOSE BALL VALVES. VB6F Series.
HIGH PRESSURE FORGED MULTI PURPOSE BALL VALVES VB6F Series www.unilok.com Features Pressure rating up to 6000psig (413bar) @21 (70 ) with standard PCTFE seats Temperature rating from -54 (-65 ) to 177
More informationMERCER VALVE 1400 SERIES THINK...MERCER FIRST MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY
MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY 1400 SERIES MERCER VALVE THINK...MERCER FIRST 1400 Series Product Overview The 1400 Series is a safety relief valve designed for lower capacity systems. The
More informationMERCER VALVE 8100 SERIES THINK...MERCER FIRST MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY
MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY 8100 SERIES MERCER VALVE THINK...MERCER FIRST 8100 Series Product Overview The Mercer Valve 8100 Series Pressure Relief Valve is State of the Art in soft seat,
More informationCNG Products. Receptacles, Ball & Check Valves Filters, Tube Fittings. ECE R110 & AGA / CGA NGV Compliant for NGV application. 100% factory tested
www.hy-lok.com Catalog No. H-CNG100 April 2014 CNG Products Receptacles, all & Check Valves Filters, Tube Fittings ECE R110 & AGA / CGA NGV Compliant for NGV application. 100% factory tested 2007, 2014
More informationcheck valves BIVCO Check Valves
BIVCO valves are considered all-purpose valves because they can be tailored in the right combination of materials for the job at hand for liquids, including acids, alkalais, formaldehyde, solvents, oils,
More informationMiniature Multimedia Valves
2 Inert Isolation PTFE 3-Way Solenoid Valve Series 1 The Series 1 diaphragm type valve has a low internal volume and rapid response time, which enables users to get readings quickly for their analysis.
More informationRSS RAM SAMPLING SYSTEM
N RSS RAM SAMPLING SYSTEM The SENSOR RAM Sample System (RSS) is designed to attach directly to the side of a tank or pipeline without the need to utilize, or create, a pressure differential to take a sample.
More informationMERCER VALVE SERIES Threaded THINK...MERCER FIRST MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY
MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY 9100 SERIES Threaded MERCER VALVE THINK...MERCER FIRST 9100 Series Threaded Product Overview The Mercer Valve 9100 Series Pressure Relief Valve is State of the
More informationINSTRUMENTATION METERING VALVES. VMT Series.
INSTRUMENTATION METERING VALVES VMT Series www.unilok.com Features Pressure rating up to VMTS series - 2000psig (137bar) VMTL & VMTM series - 1000psig (69bar) Temperature rating from -23 C(-10 F) to 204
More informationCheck Valves (C Series) Catalog 4130-C Revised, July 2004
Check Valves (C Series) Catalog 4130-C Revised, July 2004 Introduction Parker C Series Check Valves are designed for uni-directional flow control of fluids and gases in industries such as chemical processing,
More informationFULL LIFT TYPE VALVE AT 10% OVERPRESSURE
FULL LIFT TYPE VALVE AT 10% OVERPRESSURE 1800A Series For applications requiring low emissions and operation near Maximum Allowable Working Pressure (MAWP) WHAT IS A FULL LIFT TYPE VALVE? A Full Lift Type
More informationIntegral-Bonnet Needle Valves
Integral-Bonnet Needle Valves 18, 20, and 26 Series Live-loaded packing system Compact design Working pressures up to 6000 psig (413 bar) Temperatures up to 600 F (315 C) Integral-Bonnet Needle Valves
More informationMERCER VALVE SERIES Flanged THINK...MERCER FIRST MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY
9100 SERIES Flanged THINK...MERCER FIRST MERCER VALVE MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY 9100 Series Product Overview The Mercer Valve 9100 Series Pressure Relief Valve is State of the Art in
More informationProduct overview. Technical data
VALVES & CONTROLS ANDERSON GREENWOOD BLANKETING SYSTEMS The Complete Blanketing and Safety Valve System! Product overview Pad Valves Anderson Greenwood is a world leader in tank protection and blanketing.
More informationCASH VALVES TYPE G-60 HIGH CAPACITY PRESSURE REGULATOR
The Type G-60 is a high capacity all purpose regulator designed to operate within close operating limits. Application Type G-60 regulators are designed for use with steam, water, air, oil, gases, chemicals
More informationPFA Needle Valves. 4RP Series
PFA Needle Valves 4RP Series High-purity PFA material Pressures up to 180 psig (12.4 bar) Temperatures up to 300 F (148 C) 1/4, 3/8, and 1/2 in. Swagelok PFA tube fitting end connections www.swagelok.com
More informationUnion Bonnet Needle Valves
Union Bonnet Needle Valves SUNV Series Features Panel mountable Nonrotating stem tips Variety of stem tips Variety of End Connections Straight and Angle flow patterns Each and every valve is tested at
More informationBe llows-se aled Valve s
www.swagelok.com Be llows-se aled s B Working pressures up to 1000 psig (68.9 bar) Temperatures up to 900 F (482 C) 1/4, 3/8, 1/2, and 3/4 in.; 6, 10, and 12 mm end connections Brass, stainless steel,
More informationseries 5100 GAS/PNEUMATIC DRIVEN INJECTION PUMP DESCRIPTION APPLICATIONS
TEXSTEAM Pumps series 5100 GAS/PNEUMATIC DRIVEN INJECTION PUMP Series 5100 LP Wt. 45 pounds Microswitch Option Available DESCRIPTION The 5100 Series performs accurately because (1) the head is designed
More informationJ Series Filters HIGH PRESSURE FILTERS. J88 Mini In-Line (Replaceable Filter) J85 Tee-Type. J82 Mini In-Line. J83 In-Line
J Series Filters HIGH PRESSURE FILTERS J Series Filters provide filtration of particulates in gas and liquid systems prior to pressure or flow control components. J Series Filters utilize a pleated, 0
More informationASME Section I and VIII - NB Certified for Air/Gas and Steam. Series 560. Series 570. Series Stainless steel whetted trimming.
SAFETY VALVES Safety Valves SIZES FROM 1/2 TO 2 1/2 RATED TO 300 PSI TEMPERATURES TO 450 F ASME Section I and VIII - NB Certified for Air/Gas and Steam Aquatrol s Series / valve line is a high capacity
More informationCRN. Series 740 Safety Valves. 4 Aquatrol Safety Relief Valves
Series 740 Safety Valves Series 740 safety and relief valve is designed for accuracy and reliability. Engineered for heavy-duty industrial usage. Multiple purpose safety and relief valve for all services:
More informationRSS RAM SAMPLING SYSTEM
N RSS RAM SAMPLING SYSTEM General Instructions These instructions provide information for installation, operation and maintenance of the RAM Sampling System (RSS). The SENSOR RAM Sample System (RSS) is
More informationBellows-sealed Valves
ellows-sealed Valves ellows-sealed Valves V-64 SVH Series High Pressure ellows-sealed Valves Features Packless valves with all-metal seal to atmosphere ompact designed body with minimal dead space 16 SS
More informationPressure control solutions for your industry. Aerospace & Defense
Pressure control solutions for your industry. Aerospace & Defense Years of experience innovative solutions TESCOM is an experienced provider of high quality regulators, valves, manifolds, custom assemblies
More informationAccurate measurement of compressed air consumption and detection of leaks. Measuring the individual consumption per customer / cost centre
Inline Flowmeter for compressed air and gases DN15 - DN50 / 16 bar The flow meter of the series, based on the measurement principle of thermal mass flow, is ideally suited for the measurement of flow of
More informationtype 122a three-way Switching Valve
Instruction Manual Form 2279 Type 122A January 2016 type 122a three-way Switching Valve! WarnIng Failure to follow these instructions or to properly install and maintain this equipment could result in
More informationLocked Bonnet Needle Valves
Locked Bonnet Needle Valves Series Working Pressures up to 6000 psig (413 bar) Temperature Range from -65 to 1200 F (- 53 C to 648 C) Flow Coefficients up to 2.18 Locked bonnet eliminates accidental disassembly
More informationSUBSEA VALVES
SUBSEA VALVES Fitok Subsea Valves are manufactured with some notable differences to standard models to help ensure effective fluid transfer for the Oil and Gas Industry. Valves within the range include
More informationThermo Scientific Gilmont
Direct Reading Laboratory Flowmeters Instruments Wide selection of flow ranges measure air from 0.02 ml/min to 137 LPM or water from 0.0002 ml/min to 4.1 LPM Excellent chemical compatibility with glass
More informationType 310A-32A Pressure Reducing Regulator
Bulletin 71.2 D102066X012 Type 310A February 2017 Type 310A-32A Pressure Reducing Regulator Figure 1. Type 310A Regulator with Type 32A Pilot Introduction The Type 310A pilot-operated high-pressure regulator
More informationPowers Controls Powertop Two-Way Valves Normally Open
Powers Controls Powertop Two-Way s Normally Open VP 658-5 Description The VP 658 normally open valves are pneumatically operated valves designed to control the flow of both water and steam. Features Stainless
More informationtype 630r relief Valve
December 2011 type 630r relief Valve W1934 Figure 1. Type 630R Relief Valve Introduction The Type 630R is a general relief valve that is available in NPS 1 and 2 / DN 25 and 50 body sizes. It is frequently
More information9100 SERIES Flanged MERCER VALVE THINK...MERCER FIRST
9100 SERIES Flanged MERCER VALVE THINK...MERCER FIRST 9100 Series Product Overview The Mercer Valve 9100 Series Pressure Relief Valve is State of the Art in soft seat, high flow rate, pressure relieving
More informationKINGSTON. KNG Series Product Catalog. Ph: Toll:
KEst.1908 KINGSTON KNG Product Catalog Storm Manufacturing Group, Inc. 23201 Normandie Ave., Torrance, CA 90501-5050 Ph: 310.326.8287 Toll: 800.210.2525 Email: sales@kingstonvalves.com Kingston Safety
More informationCRN. Series 740 Safety Valves. Aquatrol Safety Relief Valves
Series 740 Safety Valves Series 740 safety and relief valve is designed for accuracy and reliability. Engineered for heavy-duty industrial usage. Multiple purpose safety and relief valve for all services:
More informationWINTERS INSTRUMENTS MANUFACTURER OF INDUSTRIAL INSTRUMENTATION
Process Industry Products www.winters.com MANUFACTURER OF INDUSTRIAL INSTRUMENTATION PPc Process Gauge The PPC series gauge is a durable instrument with a phenolic solid front and blowout back. Use the
More information