LX SERIES Low-Pressure Gas Compressors
|
|
|
- Dwayne Hardy
- 5 years ago
- Views:
Transcription
1 70 to 140 psig Inlet Pressure Pressure 1500 PSI C /140LX C /140LX C /140LX C /140LX C /140LX C /140LX C /140LX C /140LX C /140LX C /140LX C /140LX C /140LX C /140LX C /140LX C /140LX C /140LX C /140LX C /140LX C /140LX C /140LX C /140LX Page 1
2 140 to 300 psig Inlet Pressure Pressure 1500 PSI C /300LX C /300LX C /300LX C /300LX C /300LX C /300LX C /300LX C /300LX C /300LX C /300LX C /300LX C /300LX C /300LX C /300LX C /300LX C /300LX C /300LX C /300LX C /300LX C /300LX C /300LX Page 2
3 300 to 600 psi Inlet Pressure Pressure C /600LX C /600LX C /600LX C /600LX C /600LX C /600LX C /600LX C /600LX C /600LX C /600LX C /600LX C /600LX C /600LX C /600LX Notes: Please consult with Hydro-Pac, Inc. for applications not covered by machines listed here. Charts showing detailed capacity information for other gases and in other units are available on request. This information is supplied for reference only and is subject to change. All capacities listed are based on gas at maximum inlet temperatures of 80F (27C). The capacity will be less if the inlet gas temperature is higher. All capacities are based on 60 hertz power. Depending on the model, the capacity may be less with 50 hertz power. Please consult with Hydro-Pac for capacity information for a specific model. All pressures listed are gauge pressures. Page 3
4 Compressor Capacity in (scfm) - Single-Stage Units Pressure 1500 PSI C LX C LX C LX C LX C LX C LX C LX Note: The minimum inlet pressure for 1500 psi discharge is 200 psig. The compressors will operate at lower Pressure C LX C LX C LX C LX C LX C LX C LX Note: The minimum inlet pressure for 3000 psi discharge is 400 psig. The compressors will operate at lower Page 4
5 Compressor Capacity in (scfm) - Single-Stage Units Pressure C LX C LX C LX C LX C LX C LX C LX Note: The minimum inlet pressure for 6000 psi discharge is 800 psig. The compressors will operate at lower Pressure PSI C LX C LX C LX C LX C LX C LX C LX Note: The minimum inlet pressure for psi discharge is 1500 psig. The compressors will operate at lower inlet pressures. Do not exceed an 8 to 1 compression ratio. For example, the maximum discharge pressure with 500 psig inlet is 4000 psig. Page 5
LX-SERIES Low-Pressure Gas Compressors
70 to 140 psi Inlet Pressure Pressure 1500 PSI 70 80 90 100 110 120 130 140 C1.5-03-70/140LX 3 3.9 4.4 5.0 5.4 5.8 6.3 6.9 7.3 C1.5-05-70/140LX 5 6.4 7.2 8.1 8.7 9.4 10.3 11.3 11.9 C1.5-10-70/140LX 10
LX SERIES Low-Pressure Gas Compressors
70 to 140 psi Inlet Pressure Pressure 1500 PSI 70 80 90 100 110 120 130 140 C1.5-03-70/140LX 3 3.3 3.9 4.4 4.8 5.1 5.6 6.1 6.6 C1.5-05-70/140LX 5 5.4 6.3 7.2 7.8 8.4 9.1 10.0 10.7 C1.5-10-70/140LX 10 10.2
Filters, regulators, and lubricators
Filters, regulators, and lubricators 28 filters 3/8", 1/2", and 3/4" Ports Technical data Polycarbonate bowl Polycarbonate bowl guard Metal bowl Metal bowl sight glass Filter body Manual drain Auto drain
Continuous Run Vent Unloaders
Continuous Run Vent Unloaders Mark 2 Load Genie The LGM 20 - Mark II is a self-contained unloading valve, which can be used wherever a continuous run compressor is required. The compressor may need to
Advanced Air Driven Gas Boosters and Amplifiers. Sprague. Air Amplifiers. Gas Boosters
Advanced Air Driven Gas Boosters and Amplifiers Sprague Gas Boosters Air Amplifiers Gas Boosters and Systems Works off compressed air supplies Operates quietly Features mechanical separation between air
Air Driven Gas Boosters
Features & Benefits Sprague Products pneumatic boosters offer a cost effective way to compress shop air or bottled gas to meet various requirements for higher pressure, lower volume air or gas. Industrial
3000 Series filters 3/4" and 1" Ports
38 filters 3/4" and 1" Ports Technical data Metal bowl Metal bowl sight glass Filter body Manual drain Auto drain Standard filter Coalescing filter Seals Filter baffle Aluminum Nylon Aluminum Brass + nitrile
Precision Air Drilling Services Equipment Information & Specifications
Equipment Information & Specifications Joy Super Booster Specifications Joy WB-12 5000 Specifications Page 2 of 10 Table of Contents Joy Super Booster Specifications... 2 Joy WB-12 5000 Specifications...
MERCER VALVE SERIES Flanged THINK...MERCER FIRST MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY
9100 SERIES Flanged THINK...MERCER FIRST MERCER VALVE MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY 9100 Series Product Overview The Mercer Valve 9100 Series Pressure Relief Valve is State of the Art in
Operators Manual ECO-AIR-IVS Internal Valve Actuation System
2534-A Shell Road Georgetown, TX 78628 www.parafour.com 512-626-4099 Operators Manual ECO-AIR-IVS Internal Valve Actuation System Ver 1.0 Warnings:!! This device is electrically operated and should only
CASH VALVES TYPE G-60 HIGH CAPACITY PRESSURE REGULATOR
The Type G-60 is a high capacity all purpose regulator designed to operate within close operating limits. Application Type G-60 regulators are designed for use with steam, water, air, oil, gases, chemicals
CASH VALVES TYPE G-60 PRESSURE REGULATORS
A self-contained, self-actuated high capacity all purpose regulator designed to operate within close limits FEATURES GENERAL APPLICATION The G-60 is designed for use with steam, water, air, oil, gases,
The PL Series Pressure Air Release Valves. Sizes 1 thru 6 Available Compound Lever System Adjustable Buna-N Rubber Plunger. Crispin.
The PL Series Sizes 1 thru 6 Available Compound Lever System Adjustable Buna-N Rubber Plunger Crispin Since 1905 PL SERIES Functio n Allows air and/or gas to be released from a pressurized liquid system
Kunkle Models 189/363/389 safety valves Safety and relief products
Heavy duty ASME Section VIII, air/gas cryogenic, UV, National Board certified safety valves Model 189 Features Heavy duty construction provides long service life. Unique three-piece disc assembly with
2BE3 and P2620 Liquid Ring Vacuum Pumps and Compressors
2BE3 and P2620 Liquid Ring Vacuum Pumps and Compressors NASH 2BE3 and NASH P2620: A Wide Application Range NASH 2BE3 and NASH P2620: Reliable and Efficient The liquid ring vacuum pumps and compressors
CASH VALVE B SERIES PRESSURE REGULATORS
Single seated, spring loaded, direct acting diaphragm-type pressure reducing and regulating valves for a broad range of services FEATURES Reduce high inlet pressures to lower outlet pressures within close
Pumping Ratio 50:1. ( bar) Max. Output 7500 psi. Air Inlet. Material Outlet. Airmotor Bore Dia. 3 in. (76.2 mm) Stroke
3" and 4.25" Grease Pumps Specifications 5:1 3" Grease Pump Specifications / Performance Testing Pumping Ratio 5:1 Air Pressure 4-15 psi (2.7-1.3 bar) Max. Output 75 psi Pressure (517 bar) Air Inlet 3
HELIUM SERIES COMPRESSOR SYSTEMS
HELIUM SERIES COMPRESSOR SYSTEMS Features a 1-year System and Block Warranty Jordair QC Program System Features: Block Features: ISO 9001:2008 Cert. 97-544 Balanced Design Low Oil Consumption CSA Cert.
Check Valves, Filters and Relief Valves
Check Valves, Filters and Relief Valves Catalog 4135-CV December 2010 Series Check Valves Catalog 4135-CV Introduction Parker Series Check Valves are designed for uni-directional flow control of fluids
Cash Valve. Type G-60. High Capacity Pressure Regulator. Flow Control. Issued - February 2001 CAVMC-0511-US-0609 ISO 9001 Certified
Cash Valve Type G-60 High Capacity Pressure Regulator Issued - February 2001 CAVMC-0511-US-0609 ISO 9001 Certified Flow Control Type G-60 High Capacity Pressure Reducing And Regulating Valve Description
TYPE D50 PRESSURE REDUCING VALVE REDUCING VALVE D50 PRESSURE. PRESSURES to 300 PSIG at 420 F
D PRESSURE REDUCING VALVE TYPE D PRESSURES to 3 PSIG at 42 F Direct Acting Steam, Water or Gas Spherical Seating Surface on Floating Stainless Steel Disc for Tight Shutoff Four Spring Ranges Integral Stainless
9100 SERIES Flanged MERCER VALVE THINK...MERCER FIRST
9100 SERIES Flanged MERCER VALVE THINK...MERCER FIRST 9100 Series Product Overview The Mercer Valve 9100 Series Pressure Relief Valve is State of the Art in soft seat, high flow rate, pressure relieving
PRESSURE REGULATORS. GUIDE to REGULATORS and SERVO VALVES
Master Pneumatic regulators are made in a wide range of sizes to suit nearly all industrial requirements for pneumatic pressure regulation. Good pressure regulation is essential to the efficient use of
CAGI Data Sheets. Blower Performance Comparison. Stephen Horne, Blowers Product Manager Kaeser Compressors, Inc.
CAGI Data Sheets Blower Performance Comparison Stephen Horne, Blowers Product Manager Kaeser Compressors, Inc. Comparing blower performances across different manufacturers and technologies has long been
KINGSTON. Model 710. Side Outlet Safety Relief Valve. Manufacturing reliable industrial valves for industry since 1908.
KEst.1908 KINGSTON Manufacturing reliable industrial valves for industry since 1908. Model 710 Side Outlet Safety Relief Valve Storm Manufacturing Group, Inc. 23201 Normandie Ave., Torrance, CA 90501-5050
RCM - Direct Reading Flowmeters
Compact Design Easy to Install Horizontal or Vertical Installation Flow Rates up to 3000 GPM (Liquid) or 20000 SCFM (Gas) Low Pressure Drop Optional Alarms and Output Signals Accuracy: ± 3% of full scale
Series Low Pressure Steam Boiler Safety Valves
14-200 Series Low Pressure Steam Boiler Safety Valves ASME Section IV Set pressures from 5 to 15. Sizes 2", 2-1/2" and 3". Section IV Heating Boilers Applications: The 14 Series is an ASME Section IV high
CASH VALVE SERIES FR BACK PRESSURE VALVES
Diaphragm actuated valves designed for either continuous or intermittent operation which provide accurate, repetitive pressure control FEATURES GENERAL APPLICATION For use on practically all fluids and
Vacuum Accessories. Pneumatic. Section E. Pneumatic. Parker Hannifin Corporation Pneumatic Division Richland, Michigan
Vacuum Accessories Section E E 1 Notes 2 Index Contents Convum Filters... 4-5 Convum Silencers... 6 Silencer (Flow Thru)... 7 ASN Series Air Line Mufflers... 8 E 3 (Revised 10/13/04) Ordering Information
HOW THE SPRAGUE PRODUCTS BOOSTERS WORK
SUPERCHARGE SHOP AIR OR BOTTLED GAS WITH SPRAGUE PRODUCTS GAS BOOSTER Sprague Products pneumatic boosters offer a cost effective way to compress shop air or bottled gas to meet various requirements for
Capacity Charts. Direct Spring Acting Safety Relief Valves for Air, Gas, Liquid, and Steam Service
Direct Spring Acting Safety Relief Valves for Air, Gas, Liquid, and Steam Service About Reyco Valve Division The Reyco line of direct spring acting pressure relief valves utilizes sound engineering principles
Right Angle Nozzle Assembly
Swirl- Air atomizing nozzle Features: Large internal passages with no vanes or cores assure unrestricted flow... Little chance for clogging No external struts or supports to interfere with spray pattern
Technical Information
IMPORTANT INFORMATION: Product must be installed and used in strict conformance with NFPA Pamphlet 58 and/or NFPA pamphlet 54 and all other codes, regulations and manufacturer recommendations. Failure
Cash Valve B SERIES PRESSURE REGULATORS. ISSUED - JANUARY 1999 CAVMC-0509-US-0208 ISO 9001 Certified
Cash Valve B SERIES REGULATORS ISSUED - JANUARY 1999 CAVMC-09-US-0208 ISO 9001 Certified GENERAL INFORMATION / REGULATORS B SERIES VALVES DESCRIPTION The Cash Valve Series B pressure reducing and regulating
Mini 1. Compact High Flow 3-Way and 4-Way Pneumatic Directional Control Valves
Catalog LX-530 Mini 1 Compact High Flow and Pneumatic Directional Control Valves FEATURES: 3-port or 5-port bodies Manual, Air Pilot, Solenoid or Mechanical Operators Two-position, Single or Dual Actuation
Series Low Pressure Steam Heating Boiler Safety Valves
12-200 Series Low Pressure Steam Heating Boiler Safety Valves Section IV Heating Boilers Medium capacity safety valves protect ASME Section IV low pressure steam heating boilers. Cast bronze, full nozzle
P200 Pressure Regulator
P200 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges P202 has internal relief valve for overpressure protection The P200 series pressure regulator is a manual, direct acting,
CAGI Data Sheets. Blower Performance Comparison. Stephen Horne, Blowers Product Manager Kaeser Compressors, Inc.
CAGI Data Sheets Blower Performance Comparison Stephen Horne, Blowers Product Manager Kaeser Compressors, Inc. Comparing blower performances across different manufacturers and technologies has long been
SUITABLE FOR EXAMPLES OF USE APPROVALS. Type approval Deutsche Bahn. Requirements. AD 2000 Data sheet A2 DIN EN ISO PED 2014/68/EU
Type test approved atmospheric discharge safety valves for industrial applications Series 8 4.2 8 Safety valves made of brass, atmospheric discharge, with threaded connections SUITABLE FOR Air, gases and
SPORT TM SERIES COMPRESSOR SYSTEMS
SPORT TM SERIES COMPRESSOR SYSTEMS Features a 2-year System and 10-year Block Warranty Jordair QC Program ISO 9001:2008 Cert. 97-544 CSA Cert. No. LR77799 CRN Pressure Components B&PV Licence MA-2007 System
60 SCFM Model # A B C D 3C-060-M04-P, Manual Drain C-060-M04-F, Float Drain C-060-M04-Fi, Float Drain w/indicator
Model # A B C D 3C-020-M02-P, Manual Drain 3.0 6.8 3.0 1.5 3C-020-M02-F, Float Drain 3.0 6.8 3.0 1.5 3C-020-M02-Fi, Float Drain w/indicator 3.0 7.5 3.0 1.5 3C-020-P02-P Poly Bowl, Manual Drain 3.0 6.8
Enterprise. GE Gemini Compressor
GE Gemini Compressor Micro-Design, Inc. (MDi) offers a complete line of standard CNG packages ready for use in any of your applications. We have small packages that will serve small CNG fleets ranging
CASH VALVES TYPE G-4 PRESSURE REGULATORS
A self-actuating pilot operated pressure reducing valve handling air, gas and steam and accurate to within ½% up to 3" and 1% for sizes to 6 FEATURES Extremely compact design enables use of a smaller regulator.
B14 AAA FINE FINISH SERIES PUMP OUTFIT
PRODUCT INFORMATION B14 AAA FINE FINISH SERIES PUMP OUTFIT The B14 AAA pump system is an air assisted airless unit which combines airless and conventional or HVLP air atomization technologies to produce
Safety relief valves and double stop valves, type SFVL and DSVL REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Safety relief valves and double stop valves, type and REFRIGERATION AND AIR CONDITIONING Technical leaflet Technical leaflet Introduction The safety valves are backpressure dependent pressure relief valves.
MOTOR SPEED PRODUCT LINE: CAST IRON PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE. Section 1442 Page 1442.
Page 1442.1 TABLE OF CONTENTS Features & Benefits...2 Standard Materials of Construction...2 Specifications...2 Model Number Key...3 Cutaway View & Pump Features...3 Dimensions C, F, FH Sizes...4 Dimensions
INSTALLATION INSTRUCTIONS CMH-7A LOW AMBIENT CONTROL
Bard Manufacturing Company, Inc. Bryan, Ohio 43506 INSTALLATION INSTRUCTIONS CMH-7A LOW AMBIENT CONTROL DESCRIPTION The CMH-7A is a field installable low ambient fan cycling control kit. The CMH-7A consists
P200 Pressure Regulator
P200 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges P202 has internal relief valve for overpressure protection The P200 series pressure regulator is a manual, direct acting,
Ful-Vane Gas Compressor
Ful-Vane Gas Compressor More compression, less energy Developed from Fuller design and technology, FLSmidth s Ful-Vane Gas Compressors provide more compression with less energy: Large inlet area provides
SAFETY RELIEF VALVES SAFETY VALVES CRYOGENIC
CRYOGENIC SAFETY RELIEF VALVES CRYOGENIC SAFETY VALVES - 241 - FIGURE 710/715 SERIES Special Teflon seat, making bubble-tight seals possible to over 90% of set pressures APPLICATION DATA per spec API 527;
H2O-C14 AAA FINE FINISH SERIES PUMP OUTFIT
PRODUCT INFORMATION H2O-C14 AAA FINE FINISH SERIES PUMP OUTFIT The H2O-C14 AAA pump system is an air assisted airless unit which combines airless and conventional or HVLP air atomization technologies to
ARO-FLO SERIES FILTERS, REGULATORS AND LUBRICATORS
ARO-FLO SERIES FILTERS, REGULATORS AND LUBRICATORS For more than years, Ingersoll Rand ARO has been an industry leader in the design and ARO-Flo Series manufacture of compressors, pneumatic tools, and
AIR-KAT TM SERIES COMPRESSOR SYSTEMS
AIR-KAT TM SERIES COMPRESSOR SYSTEMS Features a 2-year System and 10-year Block Warranty Jordair QC Program ISO 9001:2008 Cert. 97-544 CSA Cert. No. LR77799 CRN Pressure Components B&PV Licence MA-2007
E8 Mini-Matic 3/8" Bolted Plastic Pumps Operating Instructions
E8 Mini-Matic 3/8" Bolted Plastic Pumps Operating Instructions Polypropylene SAFETY WARNINGS Read these instructions completely before installation and start-up. It is the responsibility of the purchaser
SV418 Series Bronze Safety Valves ASME Section VIII - NB Certified for Air, Gas, Steam, and Liquid
Safety SV418 Series Bronze Safety Description Spirax Sarco's SV418 safety and relief valve is designed for accuracy and reliability. Engineered for heavy-duty industrial usage. Multiple purpose safety
D5 & 10-5 SERIES AIR OPERATED LIQUID PUMPS
D & 1- SERIES AIR OPERATED LIQUID PUMPS PRESSURE RATIO OLD & NEW PART NUMBERS In the mid 199 s with the advent of a new inventory and computer system, SC Hydraulic Engineering was forced to change the
L_Series. L_500 Liquid Ring Compressors
L_Series L_500 Liquid Ring Compressors L_500 Compression of process gases In 2002 The Nash Engineering Company in the USA and elmo vacuum technology GmbH, a Siemens subsidiary in Germany, united to form
Phone (toll-free): (888) Phone (local): (973) Fax: (973) Web:
Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model BPS05-600 FLG Back Pressure/Bypass Valve Flanged Stainless
OPERATOR S MANUAL AND SALES AND ENGINEERING DATA
OPERATOR S MANUAL AND SALES AND ENGINEERING DATA INCLUDING: SPECIFICATIONS, SERVICE KITS, GENERAL INFORMATION, PARTS, TROUBLESHOOTING. INCLUDE MANUALS: AF044X-XX Air Motor (pn 97999-1466) & S-632 General
B14 AAA FINE FINISH SERIES PUMP OUTFIT
PRODUCT INFORMATION B14 AAA FINE FINISH SERIES PUMP OUTFIT The B14 AAA pump system is an air assisted airless unit which combines airless and conventional or HVLP air atomization technologies to produce
EVP SERIES PROPORTIONAL CONTROL VALVES
EVP SERIES PROPORTIONAL CONTROL VALVES 207 Clippard is pleased to add the EVP series proportional control valve to our electronic product line. This product combines the features of the existing EV series
Husky 716 Metal Pumps Air-Operated Double-Diaphragm
Husky 716 Metal Pumps Air-Operated Double-Diaphragm Features capability for even lower noise levels externally serviceable Husky 716 Aluminum D53XXX or D43XXX Typical Applications Typical Fluids Handled
5100 Series Inline Relief Valve 10 to 2,400 PSIG
Fred C. Gilbert Co. 106 Norris Road Bakersfield, Ca. 93308 661-399-9569 fax 661-393-9654 5100 Series Inline Relief Valve 10 to 2,400 PSIG Features Zero Leakage to 95% of Cracking Pressure Positive Reseal
Series 812. TÜV/CE atmospheric discharge safety valves for industrial applications. Air, gases and vapours
TÜV/CE atmospheric discharge safety valves for industrial applications Series 812 4.4 812 Safety valves made of brass, atmospheric discharge, with threaded connections SUITABLE FOR Air, gases and vapours
Husky 3275 Aluminum Pumps Air-Operated Double-Diaphragm
Husky 3275 Aluminum Pumps Air-Operated Double-Diaphragm Features or bspt is externally serviceable Typical Applications Husky 3275 Aluminum DK3XXX Typical Fluids Handled 50 PROCESS EQUIPMENT CATALOG Husky
TOOL SCHEMATIC AND PARTS. MODEL DF250-MC Metal Connector Framing Nailer
MODEL DF250-MC Metal Connector Framing Nailer P IMPORTANT! DO NOT DESTROY Always refer to safety and maintenance manual #1013746 for detailed information on this tool. It is the customers responsibility
Multiple vacuum pumps and associated equipment ASME air receiver NEMA 12 multiplex control panel
GENERAL The Powerex laboratory vacuum system is designed to create a suction system to remove unwanted fluids or gases from laboratory working areas. The laboratory vacuum system package is compliant with
Air Preparation Products. For Low Temperature Service. Parker Hannifin Corporation Pneumatic Division Richland, Michigan
Air Preparation Products For Low Temperature Service Catalog -E Miniature R Series R Regulators Miniature Miniature Regulators /8", /" Basic /8" Body R-C Non- R-MC Features Diaphragm operated for fast
The Pivotrol Pump Patented Selection and Sizing
How to Select and Size From the inlet pressure, back pressure and filling head conditions given below, select the pump size and check valve package which meets the capacity requirement of the application.
6-1/3 and 7-1/2 Ton Split System Air Conditioner (3 Phase) 75 to 89 MBtuh R -22 Refrigerant. Nominal Capacity BTUH
CAE Product Specifications 6-1/3 and 7-1/2 Ton Split System Air Conditioner (3 Phase) 75 to 89 MBtuh R -22 Refrigerant REFRIGERATION CIRCUIT Copeland scroll compressors on all models with single refrigeration
Crosby Style JQ pressure relief device
A combination pressure relief device designed with internal parts completely isolated from corrosive fluids and environments Features Designed in collaboration with the Chlorine Institute, Inc. Provides
Phone (toll-free): (888) Phone (local): (973) Fax: (973) Web:
Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model RVC-05-FLG PRESSURE RELIEF VALVE FLANGED 150#, 300#,
Versa-Matic. Operating Manual. 3/8" Bolted Plastic Pumps. Polypropylene Kynar
Versa-Matic Operating Manual 3/8" Bolted Plastic Pumps Polypropylene Kynar E8 SAFETY WARNINGS Read these instructions completely before installation and start-up. It is the responsibility of the purchaser
Qty 3 New (2011) I.R/Doosan XP375 Diesel Portable Air Compressor Ingersoll Rand
Qty 3 New (2011) I.R/Doosan XP375 Diesel Portable Air Compressor Ingersoll Rand XP375 375 cfm @ 125 psi Pressure Range: 80-150 psi Engine John Deere Engine 4045H Dimensions: 158.3 (L) x 78.1 (W) x 68 (H)
Crispin. The UL Series Universal Air Release Valves. Compound Lever System NPT Screwed or ANSI Class Flanges Available.
The UL Series Universal Air Release s Compound Lever System NPT Screwed or ANSI Class Flanges Available Crispin Since 105 sales@crispinvalve.com Universal Air Release s Universal Air Release UL SERIES
Cash Valve. A Series. Pressure Regulators. Flow Control. Issued - January 2001 CAVMC-0508-US-0609 ISO 9001 Certified
Cash Valve A Series Pressure Regulators Issued - January 2001 CAVMC-0508-US-0609 ISO 9001 Certified Flow Control A Series - General Information Type A series pressure reducing and regulating valves automatically
Back Pressure Regulators
Back Pressure Regulators BPR-1, BPR- and BPR-3 Series www.fitokgroup.com 01 Back Pressure Regulators Back Pressure Regulators BPR-1 Series Back Pressure Diaphragm Regulators Features Metal-to-metal seal
SAFETY VALVES. Series 560 & Aquatrol Safety/Relief Valves SERIES. ASME Section I & VIII - NB Certified for Air, Gas and Steam
SAFETY VALVES ASME Section I & VIII - NB Certified for Air, Gas and Steam SIZES FROM 1/2 TO 2 1/2 NB RATED TO 250# TEMPERATURES TO 406 O Aquatrol s Series / valve line is a high capacity safety valve used
120 SCFM Eliminex Port Sizes 1/2", 3/4", 1" Maximum Temp. & Pressure* PSI Polycarbonate 175 F, 200 PSIG Polycarb. 125 F, 150 PSIG Model
60 SCFM Eliminex Port Sizes 1/4", 3/8", 1/2" Maximum Temp. & Pressure* 60 SCFM @ 100 PSI Polycarbonate 175 F, 200 PSIG Polycarb. 125 F, 150 PSIG < 1.5 PSID at Rated Flow Model # A B C D 1P-060-M04-P, Manual
Ball Valves Pressures to 21,000 psi
Ball s s to 21,000 psi MAXIMATOR ball valves provide superior quality and performance with a variety of valve styles and process connections. All medium and high pressure connections are supplied with
J Series Filters HIGH PRESSURE FILTERS. J88 Mini In-Line (Replaceable Filter) J85 Tee-Type. J82 Mini In-Line. J83 In-Line
J Series Filters HIGH PRESSURE FILTERS J Series Filters provide filtration of particulates in gas and liquid systems prior to pressure or flow control components. J Series Filters utilize a pleated, 0
Evans SS-G & GXL -Series Integrated Stainless Gas Sticks
SS-G & GXL -Series Integrated Stainless Gas Sticks Features G & GXL Series 316SS CF8M Body Construction Cleaned and packaged in cleanroom 2-PC Design G-series allows for isolation and removal of regulator
CO 2 gas Revert Recovery
CO 2 gas Revert Recovery ASCO CO 2 Gas Revert Recovery Systems ASCO CO 2 Gas Revert Recovery Systems are engineered to efficiently recover the revert CO 2 gas from ASCO Dry Ice Pellet and Block Machines
CAPS & CONNECTORS. Rubber Caps (Special Heat Resistant EPDM Rubber) Ford - GM - Chrysler NYLON CONNECTORS
Sec.1 Sec. 10 CAPS & CONNECTORS Vinyl Vacuum Caps Can be used for capping lines and hoses while testing carburetors, emission control systems, vacuum lines etc. Color coded for size identification. Fits
Modeling a Sprinkler System or a System With Nozzles
This article is also available for viewing online at http://kb.eng-software.com/questions/270/ Modeling a Sprinkler System or a System With Nozzles There are several ways to model a sprinkler system or
Steel Suction Line Accumulators
"U" Tube Style Accumulators The Parker U tube accumulator design is a result of extensive laboratory testing plus detailed investigation of the various accumulators currently available. It takes into account
Industrial Pumping Equipment PileDriver III Series III Air Motor Features
PileDriver III Series III Air Motor Features These fully pneumatic air motors reverse stroke direction without mechanical linkages and are simpler and more reliable than older designs. Air motors are 3,
Safety relief valves and double stop valves, type SFVL and DSVL REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Safety relief valves and double stop valves, type and REFRIGERATION AND AIR CONDITIONING Technical leaflet Technical leaflet Introduction The safety valves are backpressure dependent pressure relief valves.
Design Parameters. System Equipment
/ Air NES 09-205 NES was selected to fabricate an integrated /Air remediation system for an active airport in New England where extensive jet fuel contamination was present. The system enclosure and related
P200 SERIES PORTABLE HYDROSTATIC TESTER FEATURES: PUMP TYPE AND PRESSURE RANGES
P200 SERIES PORTABLE HYDROSTATIC TESTER MODELMODEL P200-SM ( STANDARD MODEL) SHOWN IN PHOTO HEAVY DUTY ROLL FRAME: Powder coated square tubular frame for easy transport. DUAL GAUGE MANIFOLD: 4 dial gauges
Sullair (Kits & Parts)
Flotech Engineering & Compressor Parts Unit 8, Kinsealy Business Park, Kinsealy, Co. Dublin Tel: +353 1 846 4303 +353 1 846 4309 E-Mail: info@flotech.ie Web: http://www.flotech.ie Sullair (Kits & Parts)
Sec. 11 NYLON CONNECTORS
Sec. 11 NYLON CONNECTORS 12946 Connector 5/16" x 5/16" 1/8 1/8 12916 12919 12921 12938 Connector 3/8" x 1/4" 1/8 12924 1/4" 12934 Connector 3/8" x 3/8" 18835 (E1ZE-9E499-EA) Nylon 1/8 12926 17629 12922
F300 Pressure Regulator
F300 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges P302 has Internal Relief Valve for Overpressure Protection Ideal for Fix Factor Billing The F300 series pilot operated
The Universal Sewer Air Release Valve is designed to permit
Universal Sewer Valves Universal Sewer Valves Valve Function Exhausts air as a pipeline fills, and allows air in as pipeline drains Allows accumulating air to escape while line is in operation Features
Introduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas productio
Check Valves (C Series) Catalog 4130-C Revised, July 2004 Introduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas production
A/C-HEATER SYSTEM - AUTOMATIC
A/C-HEATER SYSTEM - AUTOMATIC 1993 Toyota Celica 1993 Automatic A/C-Heater Systems Celica SPECIFICATIONS SPECIFICATIONS TABLE Application Specification Compressor Type 1.6L... Nippondenso 10PA15C 10-Cyl.
What is CompleteCNG?
Product Overview What is CompleteCNG? What is CompleteCNG? CEC s CompleteCNG includes proven CleanCNG technology in a package that combines portability with configurable plug-and-play installation. The
Rotary Tooth Air Compressor System
Rotary Tooth Air Compressor System Specification General The Powerex Rotary Tooth Air Compressor Systems are designed to supply continuous oil-free air by using the most advanced pump technology available.
Product Numbering System Typical Specifi cations, Models 4AC, 4AE, 6AC, 6AE, 8AC Pump Assembly, Types AC & AE
Index Sheet ITEM S Bulletin Product Numbering System... 1 Typical Specifi cations, Models 4AC, 4AE, 6AC, 6AE, 8AC... 2 Pump Assembly, Types AC & AE... 3-4 Dimensions, Types AC & AE... 5-8 Selection Curves,
INSTRUCTION AND MAINTENANCE MANUAL GFH45 PRESSURE REGULATOR
Enidine / Conoflow 105 Commerce Way Westminster, SC 29693 Tel: (864) 647-9521 Fax: (864) 647-7993 WARNING Conoflow s products are designed and manufactured using materials and workmanship required to meet