PRESS FITTINGS FOR PLUMBING AND MECHANICAL APPLICATIONS
|
|
|
- Jasmine Ray
- 6 years ago
- Views:
Transcription
1 PRESS FITTINGS FOR PUMBING ND MECHNIC PPICTIONS JOB NME JOB OCTION ENGINEER CONTRCTOR WHOESER STREMINE PRS TM REP PRODUCT DESCRIPTION: Streamline PRS TM mechanical press copper fittings for use in plumbing or mechanical applications. vailable sizes ranging from 1/2 to 4 in diameter. Product is designed to join STM B88 (Types K,, M) hard-drawn copper tube (1/2" to 4") and soft copper tube (1/2" to 1-1/4 ). Integral leak featured design, allows for quick and easy identification of connections which have not been pressed prior to putting the system in operation. Streamline PRS TM mechanical press fittings are compatible with most common pressing tools and jaws. 50 Year imited Warranty MTERI: Streamline PRS TM components in a mechanical press copper fitting are: copper/low-lead brass for the body, EPDM o-ring, silicone o-ring lubrication, and stainless steel grip ring with a nylon spacer (2-1/2-4 only). KEY SPECIFICTIONS: Streamline PRS TM shall conform to material requirements of SME B16.22, SME B16.51, or SME B Performance criteria of Streamline PRS TM mechanical press copper fittings shall conform to IPMO PS-117 or SME B INSTTION: Product installation shall comply with the latest applicable building codes for the local jurisdiction and manufacturer s instructions. REFERENCES: NSF/NSI 61 NSF/NSI 372 IPMO PS-117 SME B16.51 UPC CS TI-MSE-13 BS Drinking Water System Components ead Content Compliance Press and Nail Connection Copper and Copper lloy Press-Connect Pressure Fittings Uniform Plumbing Code merican Bureau of Shipping PGE 1 OF 9
2 PPROVED PPICTIONS FOR 1/2 TO 4 STREMINE PRS TM : Types of Service Comments Pressure Temperature FUIDS/WTER POTBE Compatible with EPDM Seal Hot and Cold Water 200 PSI 32 F to 250 F Rainwater / Grey Water 200 PSI -20 F to 250 F Chilled Water Ethylene Glycol / Propylene Glycol 200 PSI -20 F to 250 F Hydronic Heating Ethylene Glycol / Propylene Glycol 200 PSI -20 F to 250 F Cooling Water Up to 50% Ethylene Glycol or Propylene Glycol solution 200 PSI -20 F to 250 F ow-pressure Steam UP TO 15 PSI 248 F FUE, OI ND UBRICNT Ethanol Pure Grain lcohol 200 PSI GSES Compressed ir ess than 25mg/m 3 oil content 200 PSI Up to 140 F Oxygen - O 2 (non medical) Keep oil and fat free/non-liquid O PSI Up to 140 F Nitrogen - N PSI Up to 140 F rgon Welding Use 200 PSI Up to 140 F Hydrogen - H PSI Up to 140 F Vacuum Max 29.2 inches of Mercury Up to 140 F Carbon Dioxide - CO 2 Dry Up to 140 F STREMINE PRS TM RECOMMENDED PRESSURE TESTING: Unpressed connections are located by pressurizing the system with air or water. When testing with water the proper pressure range is 15 PSI to 50 PSI maximum. eak testing with air can be dangerous at high pressures. When testing with compressed air the proper pressure range up to 15 PSI maximum. Following a successful leak test, the system may be pressure tested up to 200 PSI if required by local code requirements or project specifications. SPECIFICTION NGUGE: Press Fitting: Shall conform to material requirements of SME B16.22, SME B16.51, or SME B Performance criteria of mechanical pressed copper fittings shall conform to IPMO PS-117 or SME B16.51 a. Operating pressure: 200 PSI CWP Max b. Temperature range: -20 F to 250 F c. EPDM sealing element, factory installed -OR- Mechanical pressed copper fittings. Jointing piping similar to Mueller Industries Streamline PRS TM, Viega ProPress, or approved equal may be used. PGE 2 OF 9
3 Installation Instructions (1/2" - 2") 1. Cut tube square using a tube cutter or fine tooth saw. 2. Deburr tube ID using a deburring tool. 3. Deburr tube OD using half round file. 4. Check fitting bead to ensure seal is present. Do not use any type of oil lubrication. 5. Mark tube to proper fitting insertion depth (see Insertion Depth Chart below). 6. Turn slightly while sliding press fitting onto tube. Slide all the way to insertion mark and make contact with stop. Streamline PRS Fitting Insertion Depth Chart (1/2" - 2") Tube Size 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" Insertion Depth 3/4" 7/8" 7/8" 1" 1-7/16" 1-9/16" 7. Place press tool at a right angle over fitting bead. Start the pressing process. Please see specific tool manufacturer for tool instruction. Streamline PRS fittings must be connected with approved press tool. Please see specific tool manufacturer for tool instruction. Installation Instructions (2-1/2" - 4") 1. Cut tube square using a tube cutter or fine tooth saw. 2. Deburr tube ID using a deburring tool. 3. Deburr tube OD using half round file. 4. Check fitting ends to ensure seal, grip ring and nylon spacer are present Do not use any type of oil lubrication. 5. Mark tube to proper fitting insertion depth (see Insertion Depth Chart below). 6. Turn slightly while sliding press fitting onto tube. Slide all the way to insertion mark and make contact with stop. 7. Place press-ring at a right angle over fitting bead and check for proper engagement. Re-check insertion depth. 8. Start the pressing process. Please see specific tool manufacturer for tool instruction. Streamline PRS Fitting Insertion Depth Chart (2-1/2" - 4") Tube Size 2-1/2" 3" 4" Insertion Depth 1-3/4" 1-7/8" 2-1/8" arge diameter (2-1/2" 4") Streamline PRS fittings must be connected with approved press tool and press-rings. Please see specific tool manufacturer for tool instruction.! WRNING Failure to follow all instructions could affect joint/system integrity and may lead to property damage. Call Customer Service at FITTING if you have any questions or need assistance. PGE 3 OF 9
4 45 EBOW SM 90 EBOW ONG RDIUS RGE Item No. Diameter Wgt. Inner Viega No. PF /2" PF /4" PF " PF /4" PF /2" PF " EBOW RGE Item No. Diameter Wgt. Inner Viega No. PF /2" PF " PF " Item No. Diameter Wgt. Inner Viega No. PF /2" PF " PF " EBOW ONG RDIUS REDUCING SM Item No. Diameter 1 Wgt. Inner Viega No. PF /4" x 1/2" PF " x 3/4" EBOW SHORT RDIUS STREET SM 1 45 EBOW STREET SM Item No. Diameter Wgt. Inner Viega No. PF /2" PF /4" PF " PF /4" PF /2" PF " Item No. Diameter Wgt. Inner Viega No. PF /2" PF /4" PF " PF /4" PF /2" PF " EBOW ONG RDIUS STREET SM 45 EBOW STREET RGE Item No. Diameter Wgt. Inner Viega No. PF /2" PF " PF " EBOW SHORT RDIUS SM Item No. Diameter Wgt. Inner Viega No. PF /2" PF /4" PF " PF /4" PF /2" PF " Item No. Diameter Wgt. Inner Viega No. PF /2" PF /4" PF " PF /4" PF /2" PF " EBOW ONG RDIUS STREET RGE Item No. Diameter Wgt. Inner Viega No. PF /2" PF " PF " EBOW ME SM 90 EBOW ONG RDIUS SM Item No. Diameter Wgt. Inner Viega No. PF /2" PF /4" PF " PF /4" PF /2" PF " PGE 4 OF 9 Item No. Diameter Wgt. Inner Viega No. PF /2" PF /4" PF " PF /4" PF /2" PF "
5 90 EBOW FEME SM DPTER FEME STREET SM FTG x FPT Item No. Diameter Wgt. Inner Viega No. PF /2" PF /4" PF " PF /4" PF /2" PF " Item No. Diameter Wgt. Inner Viega No. PF /2" PF /4" PF " PF /4" PF /2" PF " EBOW DROP ER SM DPTER FEME STREET REDUCING SM FTG x FPT Item No. Diameter 2 3 Wgt. Inner Viega No. PF /2" PF /4" Item No. Diameter Wgt. Inner Viega No. PF /2" x 3/4" PF /4" x 1/2" PF " x 3/4" DPTER FEME SM DPTER ME SM Item No. Diameter Wgt. Inner Viega No. PF /2" PF /4" PF " PF /4" PF /2" PF " DPTER FEME RGE Item No. Diameter Wgt. Inner Viega No. PF /2" PF " DPTER FEME REDUCING SM Item No. Diameter Wgt. Inner Viega No. PF /2" x 3/8" PF /2" x 3/4" PF /4" x 1/2" PF " x 1/2" PF " x 3/4" PF " x 1-1/4" PF /4" x 1" PF /4" x 1-1/2" PF /2" x 1-1/4" Item No. Diameter Wgt. Inner Viega No. PF /2" PF /4" PF " PF /4" PF /2" PF " DPTER ME RGE Item No. Diameter Wgt. Inner Viega No. PF /2" PF " PF " DPTER ME REDUCING SM Item No. Diameter Wgt. Inner Viega No. PF /2" x 3/8" PF /2" x 3/4" PF /4" x 1/2" PF /4" x 1" PF " x 3/4" PF " x 1-1/4" PF /4" x 1" PF /4" x 1-1/2" PF /2" x 1-1/4" PF /2" x 2" PF " x 1-1/2" PGE 5 OF 9
6 DPTER ME STREET SM FTG x MPT COUPING NO STOP SM Item No. Diameter Wgt. Inner Viega No. PF /2" PF /4" PF " PF /4" PF /2" PF " DPTER ME STREET REDUCING SM FTG x MPT Item No. Diameter Wgt. Inner Viega No. PF /2" PF /4" PF " PF /4" PF /2" PF " COUPING NO STOP RGE Item No. Diameter Wgt. Inner Viega No. PF /2" x 3/4" PF /4" x 1/2" PF " x 3/4" Item No. Diameter Wgt. Inner Viega No. PF /2" PF " PF " CP SM P COUPING NO STOP ETENDED SM Item No. Diameter Wgt. Inner Viega No. PF /2" PF /4" PF " PF /4" PF /2" PF " Item No. Diameter Wgt. Inner Viega No. PF /2" PF /4" PF " PF /4" PF /2" PF " CP RGE P COUPING STKED STOP SM Item No. Diameter Wgt. Inner Viega No. PF /2" PF " PF " COUPING CROSS OVER SM Item No. Diameter H Wgt. Inner Viega No. PF /2" PF /4" COUPING CROSS OVER STREET SM H H Item No. Diameter Wgt. Inner Viega No. PF /2" PF /4" PF " PF /4" PF /2" PF " COUPING STKED STOP RGE Item No. Diameter Wgt. Inner Viega No. PF /2" PF " PF " Item No. Diameter H Wgt. Inner Viega No. PF /2" PF /4" PGE 6 OF 9
7 COUPING REDUCING SM FITTING REDUCER RGE Item No. Diameter Wgt. Inner Viega No. PF /4" x 1/2" PF " x 1/2" PF " x 3/4" PF /4" x 1/2" PF /4" x 3/4" PF /4" x 1" PF /2" x 1/2" PF /2" x 3/4" PF /2" x 1" PF /2" x 1-1/4" PF " x 1/2" PF " x 3/4" PF " x 1" PF " x 1-1/4" PF " x 1-1/2" COUPING REDUCING RGE Item No. Diameter Wgt. Inner Viega No. PF /2" x 1" PF /2" x 1-1/4" PF /2" x 1-1/2" PF /2" x 2" PF " x 1-1/2" PF " x 2" PF " x 2-1/2" PF " x 2" PF " x 2-1/2" PF " x 3" FITTING REDUCER SM Item No. Diameter Wgt. Inner Viega No. PF /2" x 1" PF /2" x 1-1/4" PF /2" x 1-1/2" PF /2" x 2" PF " x 1-1/4" PF " x 1-1/2" PF " x 2" PF " x 2-1/2" PF " x 2" PF " x 2-1/2" PF " x 3" TEE SM x P Item No. Diameter Y Wgt. Inner Viega No. PF /2" PF /4" PF " PF /4" PF /2" PF " TEE RGE x P Item No. Diameter Y Wgt. Inner Viega No. PF /2" PF " PF " Y Y Item No. Diameter Wgt. Inner Viega No. PF /4" x 1/2" PF " x 1/2" PF " x 3/4" PF /4" x 1/2" PF /4" x 3/4" PF /4" x 1" PF /2" x 1/2" PF /2" x 3/4" PF /2" x 1" PF /2" x 1-1/4" PF " x 1/2" PF " x 3/4" PF " x 1" PF " x 1-1/4" PF " x 1-1/2" PGE 7 OF 9
8 TEE REDUCING SM x P Y Y TEE REDUCING RGE x P 1 1 Item No. Diameter 1 Y Wgt. Inner Viega No. PF /2" x 1/2" x 3/4" PF /2" x 1/2" x 1" PF /4" x 1/2" x 1/2" PF /4" x 1/2" x 3/4" PF /4" x 3/4" x 1/2" PF /4" x 3/4" x 1" PF " x 1/2" x 3/4" PF " x 1/2" x 1" PF " x 3/4" x 1/2" PF " x 3/4" x 3/4" PF " x 3/4" x 1" PF " x 1" x 1/2" PF " x 1" x 3/4" PF " x 1" x 1-1/4" PF /4" x 1/2" x 1-1/4" PF /4" x 3/4" x 1/2" PF /4" x 3/4" x 3/4" PF /4" x 3/4" x 1" PF /4" x 3/4" x 1-1/4" PF /4" x 1" x 1/2" PF /4" x 1" x 3/4" PF /4" x 1" x 1" PF /4" x 1" x 1-1/4" PF /4" x 1-1/4" x 1/2" PF /4" x 1-1/4" x 3/4" PF /4" x 1-1/4" x 1" PF /2" x 1/2" x 1-1/2" PF /2" x 3/4" x 3/4" PF /2" x 1" x 3/4" PF /2" x 1" x 1" PF /2" x 1" x 1-1/2" PF /2" x 1-1/4" x 3/4" PF /2" x 1-1/4" x 1" PF /2" x 1-1/4" x 1-1/4" PF /2" x 1-1/2" x 1/2" PF /2" x 1-1/2" x 3/4" PF /2" x 1-1/2" x 1" PF /2" x 1-1/2" x 1-1/4" PF " x 1/2" x 2" PF " x 3/4" x 2" PF " x 1" x 1" PF " x 1" x 2" PF " x 1-1/4" x 1-1/4" PF " x 1-1/2" x 3/4" PF " x 1-1/2" x 1" PF " x 1-1/2" x 1-1/4" PF " x 1-1/2" x 1-1/2" PF " x 1-1/2" x 2" PF " x 2" x 1/2" PF " x 2" x 3/4" PF " x 2" x 1" PF " x 2" x 1-1/4" PF " x 2" x 1-1/2" Item No. Diameter 1 Y Wgt. Inner Viega No. PF /2" x 3/4" x 2-1/2" PF /2" x 1" x 2-1/2" PF /2" x 1-1/4" x 2-1/2" PF /2" x 1-1/2" x 2" PF /2" x 1-1/2" x 2-1/2" PF /2" x 2" x 3/4" PF /2" x 2" x 1" PF /2" x 2" x 1-1/2" PF /2" x 2" x 2" PF /2" x 2" x 2-1/2" PF /2" x 2-1/2" x 1/2" PF /2" x 2-1/2" x 3/4" PF /2" x 2-1/2" x 1" PF /2" x 2-1/2" x 1-1/4" PF /2" x 2-1/2" x 1-1/2" PF /2" x 2-1/2" x 2" PF " x 3/4" x 3" PF " x 1" x 3" PF " x 1-1/4" x 3" PF " x 1-1/2" x 3" PF " x 2" x 2" PF " x 2" x 2-1/2" PF " x 2" x 3" PF " x 2-1/2" x 2" PF " x 2-1/2" x 2-1/2" PF " x 2-1/2" x 3" PF " x 3" x 1/2" PF " x 3" x 3/4" PF " x 3" x 1" PF " x 3" x 1-1/4" PF " x 3" x 1-1/2" PF " x 3" x 2" PF " x 3" x 2-1/2" PF " x 3" x 2" PF " x 3" x 3" PF " x 4" x 1/2" PF " x 4" x 3/4" PF " x 4" x 1" PF " x 4" x 1-1/4" PF " x 4" x 1-1/2" PF " x 4" x 2" PF " x 4" x 2-1/2" PF " x 4" x 3" TEE FEME SM x FPT Item No. Diameter Wgt. Inner Viega No. PF /2" PF /4" PF " PF /4" PF /2" PGE 8 OF 9
9 TEE FEME REDUCING SM x FPT FNGE SM P x FNGE H Item No. Diameter Wgt. Inner Viega No. PF /4" x 3/4" x 1/4" PF /4" x 3/4" x 1/2" PF " x 1" x 1/2" PF " x 1" x 3/4" PF /4" x 1-1/4" x 1/2" PF /4" x 1-1/4" x 3/4" PF /2" x 1-1/2" x 1/2" PF /2" x 1-1/2" x 3/4" PF " x 2" x 1/2" PF " x 2" x 3/4" Item No. Diameter H Wgt. Inner Viega No. PF " PF /4" PF /2" PF " FNGE RGE P x FNGE H TEE FEME REDUCING RGE x FPT 1 Item No. Diameter H Wgt. Inner Viega No. PF /2" PF " PF " Item No. Diameter 1 Wgt. Inner Viega No. PF /2" x 2-1/2" x 3/4" PF " x 3" x 3/4" PF " x 4" x 3/4" FNGE RGE FTG x FNGE UNION SM Item No. Diameter Wgt. Inner Viega No. PF " PF /2" PF " PF " Item No. Diameter Wgt. Inner Viega No. PF /2" PF /4" PF " PF /4" PF /2" PF " UNION FEME SM Item No. Diameter Wgt. Inner Viega No. PF /2" PF /4" PF " PF /4" PF /2" PF " UNION ME SM Item No. Diameter Wgt. Inner Viega No. PF /2" PF /4" PF " PF /4" PF /2" PF " PGE 9 OF 9
PRESS FITTINGS FOR PLUMBING AND MECHANICAL APPLICATIONS
PRESS FITTINGS FOR PUMBING ND MECHNIC PPICTIONS JOB NME JOB OCTION ENGINEER CONTRCTOR WHOESER STREMINE PRS TM REP PRODUCT DESCRIPTION: Streamline PRS TM mechanical press copper fittings for use in plumbing
COPPER FITTINGS FOR PLUMBING AND MECHANICAL APPLICATIONS
COPPER FITTINGS FOR PLUMBING AND MECHANICAL APPLICATIONS Job Name Job Location Engineer Contractor Wholesaler Streamline Rep Product Description: Streamline Wrot Copper Pressure and DWV fittings for use
CATALOG C-NPS-0618 AHEAD OF THE FLOW NIBCO. Press System
CATALOG C-NPS-0618 AHEAD OF THE FLOW NIBCO Press System Business-to-Business Solutions Look to NIBCO for technology leadership. The velocity with which e-business evolves demands that new products and
TECHNICAL MANUAL PRESS FITTINGS FOR STEEL PIPE. Phone: Fax:
TECHNICL MNUL Phone: 877.228.9246 Fax: 877.232.9246 E-mail: info@cimberiovalve.com www.fastlockfittings.com MKT-24 FSTLOCK fittings are not currently approved for use with gas or fire protection applications.
HARCO DUCTILE IRON IPS GASKETED FITTINGS DESIGN DATA
HRCO DUCTIE IRON IPS GSKETED FITTINGS DESIGN DT pplicable Standards Ductile Iron: STM 536 Grade 65-45 -12, 80-55 - 06 Joints: STM D-3139; WW C153 Gaskets: SR Standard, EPDM & Nitrile vailable STM F-477
SPECIFICATIONS & INSTALLATION GUIDE ANOTHER QUALITY PRODUCT BY FORZA GLOBAL STAINLESS V PRESS EDITION: 0001
STAINESS V PRESS SPECIFICATIONS & INSTAATION GUIDE ANOTHER QUAITY PRODUCT BY FORA GOBA EDITION: 0001 G O B A World Force In Plumbing Systems Forza Global in partnership with one of the world s leading
Ball Valves. Full Port Ball Valves - Compression w/ Drain Cap - Forged Brass. Full Port Mini Ball Valve - Forged Brass 05/06/15
05/06/15 G8 Full Port - Compression w/ Drain Cap - Forged Brass Rated for cold water, oil & gas Blow-out proof stem Temperature Range: -30 to 150C (-22 to 302F) Working Pressure: 600 psi Blue handle Lead-Free
Jones Stephens Corp. PlumBest LTConnections SECTION D - FITTINGS & VALVES. Brass Compression Fittings
SECTION - FITTINGS & VALVES Brass Compression Fittings... 131-132 Chrome Plated Compression Fittings... 133 45 Flare Tube Fittings... 134-135 Space Heater & Gas Range Fittings... 136 Yellow Brass Pipe
HVAC-R COPPER TUBE AND FITTINGS
INDEX ADAPTERS FEMALE CONNECTION C FPT... 14-5 MALE CONNECTION C MPT... 14-4 CAP CONNECTION C... 14-4 COPPER TUBE STRAP TWO-HOLE... 14-5 COUPLINGS REDUCING CONNECTION C C... 14-4 ROLLED STOP CONNECTION
Tool Reference Guide. Swagelok Minnesota North Dakota Appleton offers a complete line of tools and equipment to rent or purchase.
Tool Reference Guide Swagelok Minnesota North Dakota Appleton offers a complete line of tools and equipment to rent or purchase. This allows for ease and accessibility while in the work place. Whether
Viega Product Guide. Catalog 2017
Viega Product Guide Catalog 2017 Shaping the future of press technology Engineered for you Viega has been innovating and changing the landscape of pipe-joining technology since 1899. Viega systems are
BRONZE FITTINGS. Class 125 (150) For steam, water, gas, oil and air service Standard specifications PRICING FILE AVAILABLE ONLINE
NIPPLES & FITTINGS RONZE FITTINGS U L UL842, UL258, UL125, Class 125 (150) For steam, water, gas, oil and air service Standard specifications Materials - STM 62-93 (85,5,5,5) C83600 PRICING FILE VILLE
INTERNATIONAL CATALOG HVACR COPPER TUBE & FITTINGS
INTERNATIONAL CATALOG HVACR COPPER TUBE & FITTINGS HVACR COPPER TUBE & FITTINGS PRODUCT INFORMATION Tube & Pipe Copper Tube Plumbing.... 8 Plastic-Coated Copper Tube... 9 Copper Tube Hvacr... 10 Level
Micro24 TM Hose & Tube System
Micro24 TM Hose & Tube System THE COMPACT HOSE & TUBE SYSTEM IDEAL FOR HOSING APPLICATIONS IN SMALLER AND PROGRESSIVE DIES WHERE SPACE IS LIMITED. METAL FORMING SOLUTIONS TM Micro24 System The Compact
ABS DWV FITTINGS FOR PLUMBING AND MECHANICAL APPLICATIONS
ABS DWV FITTINGS FOR PLUMBING AND MECANICAL APPLICATIONS Job Name Contractor Job Location Wholesaler Engineer Streamline Rep Product Description: Streamline ABS DWV ittings for use in applications including
CHECK VALVES. Flare to Flare. Solder to Solder. Solder to Solder - Extended Ends. Shipped loosely assembled.
CHECK VLVES MUELLER CHECK VLVES DESIGN FETURES 1. Soft neoprene seat provides positive seal against reverse flow. 2. Four space tabs maintain washer/seat alignment and guide the seat disc for smooth operation.
Piping technology copper/gunmetal
model no. page model no. page model no. page model no. page model no. page Profipress with SC-Contur Piping technology copper/gunmetal 1 ZM_A1_int_en_20170203_083425_5.pdf 1 03.02.2017 10:24:38 Press connector
Spira-trol TM Two-port Control Valves EN Standard LE, LF and LL DN15 to DN100 and ASME Standard LEA, LFA and LLA ½" to 4"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Snow Melt EN_US_2014_V2.indb 171 2/7/ :18:52 AM
171 Viega snow melting systems are complete hydronic solutions for residential, commercial and industrial applications. All it takes is ViegaPEX Barrier tubing installed in a concrete slab and the proper
Chibro Press Fit Stainless Steel Pipe and Fittings. Data Sheet
Chibro Press Fit Stainless Steel Pipe and Fittings General Information Data Sheet The Chibro Press Fit Pipe system permits the installation of a metal piping system in a reliable and economic way. The
A. This Section includes general duty valves common to several HVAC piping systems.
SECTION 23 05 23 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
PLUMBING WHOLESALE CATALOG
PLUMBING WHOLESALE CATALOG PLUMBING WHOLESALE CATALOG CONTENTS Tube & Pipe Copper Tube............................8-9 Plastic-Coated Copper Tube.................10 Level Wound Copper Tube..................11
BRASS PIPE FITTINGS 100A-BA. CONSTRUCTION CA360, CA345, CA3604, CA377 Brass. Use with brass, copper or iron pipe. Temperature Range: 65 to +250 F.
RSS FITTINGS RSS FITTINGS CONSTRUCTION C360, C345, C3604, C377 rass PPLICTIONS RNGES Use with brass, copper or iron pipe Temperature Range: 65 to +250 F. Pressure Range: Up to 1000 PSI Pipe Thread ssembly:
Pipe Fittings 1/16 to 1 in. sizes 316 stainless steel, brass, and carbon steel NPT, ISO/BSP, and SAE threads
www.swagelok.com Pipe Fittings 1/16 to 1 sizes 316 stainless steel, brass, and carbon steel, /SP, and S threads 2 Pipe Fittings Contents Nipples Page 4 dapters, Gaskets Page 6 Reducing ushings, Reducers
08.08 Vic-Check Valves
The check valves are a product of computer-assisted innovative engineering with quality features including a new hydrodynamically efficient profile. The Vic-Check valve utilizes a spring-assisted, single-disc
Model 912. Model 913: Full nozzle design. Bronze/brass body and bonnet. 316 SS trim (base, disc and disc holder).
Models, 3, and SME Section VIII, ir/steam/gas/liquid, UV National oard ertified. lso available for Vacuum Service. PED ertified for Non-Hazardous Gas. pplications ir/gas compressors - intercoolers - aftercoolers.
9907T Straight DZR Brass Automatic Balancing Valve
Feature DZR brass automatic balancing valve regulated by interchangeable cartridge (see cartridge section) Union ends for tailpieces connections FPT, MPT, Solder and Press tailpieces available 300WOG Working
CHECK VALVES MUELLER CHECK VALVES TECHNICAL DATA. Flare to Flare. Solder to Solder. Solder to Solder - Extended Ends. Shipped loosely assembled.
MUELLER CHECK VLVES TECHNICL DT CHECK VLVES vailable in 1/4 through 5/8 flare sizes and 1/4 thru 7/8 solder sizes. Recognized under the component program of Underwriters Laboratories for use in the US
Product Instructions. Diverting Valve. Valve Cross Section. Features. Specifications. Operations
Diverting Valve Three-Way Diverting Valves can be used for temperature control in many heating and snowmelting applications. Valve Cross Section Features Includes solder tailpieces (1-1/4" and 1-1/2" models
S, M, L, and 31 Series. Straight-pattern flow coefficients (C v ) from to Low- and high-pressure service
www.swagelok.com Metering Valves S, M, L, and Straight-pattern flow coefficients (C v ) from 0.004 to 0.16 Low- and high-pressure service Repeatable vernier handles available rass and 316 stainless steel
SECTION METERS AND GAGES FOR HVAC PIPING
PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions Specification Sections, apply to this Section. 1.2 SUMMARY A. This
CPV Manufacturing O-SEAL and Mark VIII Valves and Fittings
CPV Manufacturing O-SEAL and Mark VIII Valves and Fittings January, 2017 503 Schoolhouse Road, Kennett Square, P: 215-386-6508 PA 19348 P: 215-386-6508 www.cpvmfg.com F: 215-387-9043 www.cpvmfg.com CPV
CATALOG. USMetrixQC is a Quick Connect Manifold system for warm and cold running water, and central heating systems. USMetrix QC
CATALOG USMetrixQC is a Quick Connect Manifold system for warm and cold running water, and central heating systems. Connector Body O-Ring Collet (Patent Pending Design) EASY AND QUICK INSTALATION Connector
AWWA Grooved Fittings
WW Grooved Sumittl Form WW Grooved Fittings SUMITT INFORMTION PROECT NME: ENGINEER: CONTRCTOR: WW Grooved Fitting SPEC. SECTION: MEMER FETURES & DVNTGES Fittings supplied with rigid rdius grooves in ordne
Stainless Steel 316 One-touch Fittings
CT.ES50- Stainless Steel One-touch Fittings aterial etal parts: Stainless steel Seal parts: Special FK Can be used with steam Operating fluid temperature 5 to 0 C Grease-free tubing material FEP, PF, Nylon,
Product Instructions. Mixing Station. Features. Specifications. Materials
Mixing Station The Viega Mixing Station provides supply water temperature modulation when connected to a variety of heat sources such as conventional or condensing boilers, water heaters, or geothermal
Stainless Steel Pipe System. System No. Submitted By Spec Sect Para Location Date Approved Date TEMPERATURE ( F/ C)
The Victaulic Vic-Press 304 System for joining approved Type 304/304L stainless steel pipe provides a fast, easy, clean, reliable means for joining 1/2"/15, 3/4"/20, 1"/25, 1 1/2"/40, and 2"/50 stainless
Section 4 ASTM Ecoflex Thermal Single Submittal Information Revision H: Dec. 20, 2010 Project Information Job Name: Location: Engineer: Contractor: Manufacturer s Representative: Technical Data Part No.
BROEN UNiFlEx FiTTiNgs FOR special water OEN OEN ifl ifl FOR FOR PEC spec TER TER
BROEN UNIFLEX Fittings for SPECIAL water LAB Table of Contents Content Page Table of Content 2 BROEN UniFlex TM BASIC 4 Product Overview 5 Special Water Fittings Wall Mounted Fitting - Fully Recirculating...
We provide superior performing compressed air & gas systems with engineered longevity to reduce operating costs and improve productivity.
We provide superior performing compressed air & gas systems with engineered longevity to reduce operating costs and improve productivity. ENGINEERED FOR SUPERIOR PERFORMANCE Compressed Air & Gas Systems
JB ENGINEERING AND CODE CONSULTING, P.C Cardinal Drive Munster, IN Phone: Fax:
JB ENGINEERING AND CODE CONSULTING, P.C. 1661 Cardinal Drive Munster, IN 46321 Phone: 219-922-6171 Fax: 219-922-6172 E-Mail: JBEngineer@aol.com JULIUS A. BALLANCO, P.E. President August 5, 2010 - Engineering
SHARKBITE INSTALLATION GUIDE
SHARKBITE INSTALLATION GUIDE THE TOTAL PLUMBING SOLUTION CUT: Cut the pipe square removing rough edges and debris. Mark the pipe to the correct insertion depth. PUSH: Push pipe and fitting together up
1.1 PURPOSE A. This section is intended to define the general installation and minimum product requirements for hydronic and steam valves.
Date Description of Change Pages / Sections Modified ID 6/15/16 Entire document - mgl44 PART 1 - INTRODUCTION 1.1 PURPOSE A. This section is intended to define the general installation and minimum product
Piping technology gunmetal
model no. page model no. page model no. page model no. page model no. page Sanpress with SC-Contur Piping technology gunmetal 1 ZM_G3_int_en_20170106_082446_5.pdf 1 06.01.2017 10:02:32 Press connector
We provide superior performing compressed air & gas systems with engineered longevity to reduce operating costs and improve productivity.
We provide superior performing compressed air & gas systems with engineered longevity to reduce operating costs and improve productivity. ENGINEERED FOR SUPERIOR PERFORMANCE Compressed Air & Gas Systems
SHARKBITE INSTALLATION GUIDE
SHARKBITE INSTALLATION GUIDE THE TOTAL PLUMBING SOLUTION CUT: Cut the pipe square removing rough edges and debris. Mark the pipe to the correct insertion depth. PUSH: Push pipe and fitting together up
Quick- Connect. Quick-Connect Plumbing Products Canadian Catalogue and Price List. Effective April 27, Watts. c a
Quick- Connect Quick-Connect Plumbing Products Canadian Catalogue and Price List Effective April 27, 2015 Watts. c a Sizing Matrix Example: 3575-10 = Series 35, Type 75, 1 2" CTS 3 8 CTS = 08 1 4 OD =
Table of Contents. SeaTechInc.com
Table of Contents 1-2 Technical Information 3 Tubing for 35 Series 4-5 10 Series Fittings 6-11 35 Series Fittings and Valves 12 35 Series Quick Connect Manifold, Configuration Styles 13 35 Series Quick
O-RINGS METRIC SIZES AVAILABLE
METRIC SIZES AVAILABLE 16 97 ILLUSTRATIONS BELOW NOT TO SCALE Military Specification References Temperature Range F Drawing # Specification Static Dynamic Fluid Low High Elastomer Comments AN1295 For use
ETP-5E & ETP-10E ECO-TECH PLUS ELECTRIC CONVECTION STEAMER PARTS AND SERVICE MANUAL
ETP-5E & ETP-10E ECO-TECH PLUS ELECTRIC CONVECTION STEAMER PARTS AND SERVICE MANUAL EFFECTIVE JANUARY 10, 2018 Superseding All Previous Parts Lists. The Company reserves the right to make substitution
60PP Series Couplings
Tubing Size 3/8 3/4 3/8 Flow Polypropylene 60PP Series Couplings These New 60PP Series couplings bring the highest available 3/8 flow with both valved and nonvalved configurations. They are manufactured
Rigid/Swivel Optional Spouts
Rigid/Swivel Optional Spouts SPECIFYING PROCEDURE FOR OPTION RIGID/SWIVE SPOUTS: 1. Select BSE PRODUCT with Standard Gooseneck Spout, and with spout outlet and handles required. 2. Select Optional Rigid/Swivel
BBV Automatic or Manually Actuated Boiler Blowdown Valves DN15 to DN65
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development improvement of the product, we reserve the right to change the specification without
Tubing Size 1/8-1/4 1/8 Flow Chrome Brass 20CB Series Couplings
Tubing Size 1/8-1/4 1/8 Flow Chrome Brass 20CB Series Couplings Produced in food grade chrome plated brass, these 1/8 flow size couplings are more durable and withstand higher pressures. They are available
product catalogue Q215 ISO 9001:2008 certified
product catalogue Q215 ISO 9001:2008 certified Haelok the company Haelok Inc, the inventor of one of the world strongest mechanical pipe connection, is a Zurich, Switzerland based privately held company,
Technical Datasheet. SP Terminal Units. Classification. Services. Terminal Block. Check Valve Assembly. Tailpipe Options
SP Terminal Units Pneumatech MGS East & Zeus SP terminal units provide a safe means of supplying medical equipment with medical gases from the central gas supply system. They are manufactured to accept
Piping technology stainless steel
model no. page model no. page model no. page model no. page model no. page Sanpress Inox with SC-Contur Piping technology stainless steel 1 ZM_G1_int_en_20170106_082446_5.pdf 1 06.01.2017 10:00:47 Press
CATALOG C-NPS-0812 AHEAD OF THE FLOW. NIBCO Press System
CATALOG C-NPS-0812 AHEAD OF THE FLOW NIBCO Press System Business-to-Business Solutions Look to NIBCO for technology leadership. The velocity with which e-business evolves demands that new products and
Advantages of Grooved Fittings
Grooved Fittings Advantages of Grooved Fittings Comparative Advantages Allows angular deflection-misalignment Expansion, contraction or, no need for expansion joint Reclaimable, no need for union Allows
2016 New Product Catalog. Brass Fittings. & Accessories
2016 New Product Catalog Brass Fittings & Accessories Blank Page Inside Front Cover Table of Contents 04-07 Pipe Fittings & Nipples 08-11 Compression Fittings 12-15 Flare Fittings 16-17 Garden Hose Fittings
Diaphragm Valves. LD Series. Working pressures up to 300 psig (20.6 bar) Shutoff, bulk-gas distribution, and isolation service
www.swagelok.com Diaphragm Valves LD Series Working pressures up to 300 psig (20.6 bar) Shutoff, bulk-gas distribution, and isolation service Cast, forged, and bar stock stainless steel body material 1/4
Rosemount Manifolds. Product Data Sheet April , Rev PC. Factory assembled, leak-tested, and calibrated
Product Data Sheet pril 2015 00813-0100-4733, Rev PC Rosemount Manifolds Factory assembled, leak-tested, and calibrated Full breadth of offering including integral, conventional, and in-line designs Integral
Hydronic Specialties AFLB Series Specifications Automatic Pressure Independent Flow Limiter w/ Ball Valve
FL Series Specifications utomatic Pressure Independent Flow Limiter w/ all Valve : FL - - High : FL - High - Low : FL - High - 2" U.S. Patent No. 8,061,195 PRODUT DESRIPTION: The FL is an utomatic Pressure
Valve Selection. 1. Function and service considerations
1. Function and service considerations Valve Selection Selection Valves serve the purpose of controlling the fluids in building services piping. Valves are produced in a variety of design types and materials.
Lab Specialty Products Technical Information TECHNICAL INFORMATION WEIGHTS & DIMENSIONS
Lab Specialty Products Technical Information TECHNICL INFORMTION WEIGHTS & DIMENSIONS Contact Spears for any Information not found. Page 569 Lab Ball s Sample Engineering Specification ll thermoplastic
PP1 Series Piping Packages for VG1000 Series Ball Valves
PP Series Piping Packages for VG000 Series Ball s Product Bulletin PP2xxxxx- Series, PP8xxxxx- Series Code No. LIT-20974 Issued August, 204 PP Series Piping Packages are designed to provide an easier way
BROEN UNiFlEx FiTTiNgs FOR special water OEN OEN ifl ifl FOR FOR PEC spec TER TER
BROEN UNIFLEX Fittings for SPECIAL water LAB Table of Contents Content Page Table of Content 2 BROEN UniFlex TM BASIC 4 Product Overview 5 Special Water Fittings Wall Mounted Fitting - Fully Recirculating...
PIPING PACKAGES TABLE OF CONTENTS
PIPING PACKAGES TABLE OF CONTENTS ITEM PAGE General Notes and Legend........................................................ 3 Piping Package Code Descriptions & Diagrams VAV Products and HL, HP, VF, and
GRPV Series Residual Pressure Valves
Residual pressure valve designed to protect cylinder and contents. Key Features & Benefits Prevents backflow of impurities and foreign substances Automated assembly and testing processes ensure exceptional
Models 910, 911, 916, 917, 920, 921, 927 ASME Section VIII, Air/Gas/
Models 910, 911, 916, 917, 920, 921, 927 ASME Section VIII, Air/Gas/ Steam/Liquid, UV National Board Certified. Also available for Vacuum Service Model 921: Steel body and bonnet with plain lift lever
16 - Swivels & Joining Links
16 - Swivels & Joining inks Quicklinks - Stainless Stainless "C" inks 316 grade stainless steel. n alternative to shackles or snaps allowing quick entry via a threaded hexagon locking nut. S 1 R S S..
SECTIO N 15 Phone: (866) Fax: (888)
PVC FITTINGS SCHEDULE 40, 80, INSERT NYLON FITTINGS PVC & CPVC NIPPLES SECTIO N 15 www.cbsupplies.ca Phone: (866) 503-5523 Fax: (888) 562-2095 AGI@cbsupplies.ca PRODUCTS LIST SCHEDULE 40 PVC PRESSURE FITTINGS
Pipe Fittings. 1/16 to 1 in. sizes. 316 stainless steel, brass, and carbon steel. NPT, ISO/BSP, and SAE threads.
Pipe Fittings 1 www.swagelok.com Pipe Fittings PIP 1/16 to 1 sizes 316 stainless steel, brass, and carbon steel, /SP, and S threads 2 Weld, VCR, VCO, Pipe, and Vacuum Fittings Contents Nipples Page 4 Crosses
LABORATORY SERVICE FIXTURES
Valve Selection Guide Provincial Lab Systems offers a wide selection of valves for use in the laboratory. The selection of a valve for any particular application depends upon many factors, including the
SECTION VALVES
PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions Specification Sections, apply to this Section. B. Related Sections:
PRESS TOOLS PRODUCT CATALOG
PRESS TOOLS PRODUCT PERfoRMAnCE UnDER PRESSURE Since we introduced press tools to America over a decade ago, we haven t stopped working. Today, we manufacture the most proven press tools in the industry,
PRESS TOOLS PRODUCT CATALOG
PRESS TOOLS PRODUCT PRESS WITH CONFIDENCE. PRESS WITH THE BEST. RIDGID press tools save you time and money by delivering reliable performance press after press. Every generation of press tools works harder
OwNErS MaNual with INSTallaTION INSTrucTIONS
OwNErS MaNual with INSTallaTION INSTrucTIONS EMISSIONS KIT light duty 6.2l chevrolet/gm diesel for use on gm 6.2L diesel trucks equipped with the banks sidewinder turbo system this manual is for use with
Engineering Information
Finishes WaterSaver standard construction laboratory service fixtures and safety equipment are generally furnished with a chrome plated finish. However, WaterSaver offers a choice of four plated finishes
BACKFLOW PREVENTERS DUAL-CHECK BACKFLOW PREVENTER WITH ATMOSPHERIC VENT T/S-459 Certified to ASSE Standard 1012
CKFLOW PREVENTERS DUL-CHECK CKFLOW PREVENTER WITH TMOSPHERIC VENT T/S-459 Certified to SSE Standard 1012 Certified to CS Standard 64.3 Forged brass construction Threaded or sweat true union end connections
LK Manifold RF. Design. Requirements. Documentation
LK Manifold RF Design LK Manifold RF is made of stainless steel, the variants having 2 to 12 floor heating circuits. The manifold is delivered pre-mounted in brackets. The manifold has thermometers on
LOWER MACUNGIE TOWNSHIP COMMUNITY CENTER ADDITIONS AND RENOVATIONS
LOWER MACUNGIE TOWNSHIP COMMUNITY CENTER. SECTION.0 - GENERAL-DUTY VALVES FOR PLUMBING PIPING PART - GENERAL. RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and
LIQUIfit Push-In Fittings
LIQUIfit Push-In Fittings This "eco-designed" range proposes an innovative alternative for water applications; no fluid contamination occurs and environmental protection is guaranteed. These fittings ensure
FILTER KIT. HWF172 Watersentry VII Kit (Lead, Aesthetic Chlorine Taste & Odor & Particulate Class I Reduction) FOR COMMERCIAL USE ONLY
KIT HWF17 Watersentry VII Kit (Lead, Aesthetic Chlorine Taste & Odor & Particulate Class I Reduction) These filter kits are designed to be used with various Water Cooler and Drinking Fountain models. (Note
TABLE OF CONTENTS 8000 SERIES RACE HOSE ENDS 3000 SERIES RACE HOSE ENDS
TABLE OF CONTENTS Technical Specifications & Torque Table Page 2 2012 New Products Page 3 Series 2000 Pro-Flow Race Hose Ends Page 4-5 Series 3000 Race Hose Ends Page 6-8 Series 3000 Direct-Fit Hose Ends
COOLSAFE Pre-Insulated PE Piping System
COOLSAFE Pre-Insulated PE Piping System Pipe Fittings Valves Installation COOLSAFE PE piping system provides a cost effective way for installing insulated piping for a broad range of industries. Pipe and
Valves & Flow Control Components Valves & Flow Control Components
Section 4 Valves & Flow ontrol omponents Valves & Flow ontrol omponents... 106 SJ-200 Low-Profile utterfly Valve... 107 SJ-300N utterfly Valve... 108 SJ-300F utterfly Valve (for Fire Protection)... 110
Flowmeter for Gases. Type Type can be combined with... Type 8802-YG Process control valve. Type 5281 Solenoid valve
Flowmeter for Gases Thermal mass flow measurement Pipe sizes up to 2" Integrated inlet and outlet pipes for flow conditioning -20mA signal output of process value Type can be combined with... Type 8802-YG
Installation Fittings
PVC TEES SCH 80 - Fitting only Part No. Code Size L H i.d. PV8T005F 159 000 527 0.50 in. 3.75 3.6 0.85 PV8T007F 159 000 529 0.75 in. 3.75 3.8 1.06 PV8T010F 159 000 531 1.00 in. 4.26 4.0 1.33 PV8T012F 159
Copper & Copper Nickel. Pipes Fittings Flanges.
Copper & Copper Nickel Pipes Fittings Flanges BOMYUNG METAL.Co.,Ltd CONTENTS 01 COPPER PIPES COPPER PIPES CHEMICAL COMPOSITION / MECHANICAL PROPERTIES / WELDING INSTRUCTION / PIPE / COIL COPPER FITTINGS
STRATO-THERM Terminals and Splices for High Temperature Applications
atalog 1308940 Introduction Product Facts Product available in temperature ranges of 500 F [260 ], 550 F [288 ], 650 F [343 ] and 1200 F [649 ] Product employs the famous and crimp ide range of wire sizes
Swivel Joints Flexmaster Joints Part Number NH NH NH NH NH NK NK
FLUID CONVEYING PRODUCTS Section Pages Hose 15-67 Fittings 68-180 Adapters and Tube Fittings 181-228 Description Page Features 246, 247 Technical Data 248, 253 Gasket Selector Chart 249 How to Order 250
catalog C-NPS-1014 NIBCO Press System
catalog C-NPS-1014 ahead of the flow NIBCO Press System Business-to-Business Solutions Look to NIBCO for technology leadership. The velocity with which e-business evolves demands that new products and
Smartloop Connection Set. Instructions for Use from 07/2008. en_int
Smartloop Connection Set Instructions for Use Model Year built: 2276.1 from 07/2008 en_int Smartloop Connection Set 2 from 27 Table of contents Table of contents 1 About these instructions for use 4 1.1
SECTION 2 SAFETY, TOOLS AND EQUIPMENT, SHOP PRACTICES UNIT 7: TUBING AND PIPING
SECTION 2 SAFETY, TOOLS AND EQUIPMENT, SHOP PRACTICES UNIT 7: TUBING AND PIPING UNIT OBJECTIVES After studying this unit you should be able to list the different types of tubing used in heating, air conditioning,
PORTABLE EXTRACTOR 500/500H ( ) 115V 230V
PORTABLE EXTRACTOR 500/500H (78-003 78-004) 115V 230V 500/500H TOP VIEW 03-00030 4 RIVET 3/16 X 1/2 AL/AL BLK AND 03-00204 1 RIVET - 3/16 X 5/8 TRI FOLD AL/AL 03-01547 1 WASHER FLAT.203 ID X.734 OD X.06
SAMPLE PRODUCT SPECIFICATIONS
SAMPLE PRODUCT SPECIFICATIONS Thermometers & Gauges Product Guide Specification THERMOMETERS & GAUGES Specifier Notes: This section covers Miljoco Corporation thermometers and pressure gauges suitable
VCR. Metal Gasket Face Seal Fittings. 1/16 to 1 in. and 6 to 18 mm sizes. High-purity stainless steels
www.swagelok.com Metal asket ace Seal ittings /6 to and 6 to 8 mm sizes igh-purity stainless steels The original design, the authentic brand 2 Metal asket ace Seal ittings ontents lands Page 4 odies Page
HVACR WHOLESALE CATALOG
HVACR WHOLESALE CATALOG HVACR WHOLESALE CATALOG CONTENTS Tube & Pipe Copper Tube............................8-9 Plastic-Coated Copper Tube.................10 Level Wound Copper Tube..................11
G4 Series. ...Extremely sensitive and accurate PILOT OPERATED PRESSURE REDUCING VALVES PRESSURE EQUIPMENT DIRECTIVE (PED) Adjusting Screw
G4 Series PILOT OPERATED PRESSURE REDUCING VALVES...Extremely sensitive and accurate The G4 pressure reducing valve is designed for use on steam, air and gases. It will maintain a constant outlet pressure