ABS DWV FITTINGS FOR PLUMBING AND MECHANICAL APPLICATIONS

Transcription

1 ABS DWV FITTINGS FOR PLUMBING AND MECANICAL APPLICATIONS Job Name Contractor Job Location Wholesaler Engineer Streamline Rep Product Description: Streamline ABS DWV ittings for use in applications including sanitary drain, waste, and vent (DWV), sewer, and general drainage applications. Available in sizes ranging from 1-1/ to in diameter, all ittings should be manufactured in the United States. Material: Acrylonitrile-butadiene-styrene (ABS) DWV ittings shall conform to cell class ---- as deined in ASTM 9. Key Speciications: Streamline ABS DWV ittings shall conform to ASTM D1 and F198. Third-party certiications shall be in place for ittings in compliance with NSF Standard 1. Fittings shall be certiied to the Uniform Plumbing Code (UPC) where applicable. Installation: Installation shall comply with the latest applicable building codes for the local jurisdiction. Solvent cement connections shall be made using a two-step process consisting of primer (in conformance with ASTM F) and solvent cement (in conformance with ASTM D). For detailed installation instructions, consult the Plumbing Apprentice Training Manual available from PPFA (Plastic Pipe & Fitting Association) at ppfahome.org. ABS DWV ittings are not designed for hot water systems and discharge temperatures should not exceed F. Systems shall be installed to avoid contact with thread sealants or other chemical agents which are not compatible with ABS. ydrostatic testing of the system shall be completed prior to use. Do not test or use Streamline plastic products with compressed air or compressed gases. References: ASTM 9 ASTM D1 ASME F198 ASTM F ASTM D Classiication for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Tube and Fittings Standard Speciication for ABS Drain, Waste, and Vent Fittings Taper Pipe Threads for Thermoplastic Fittings/Fitting Threads Standard Speciication for Primers Standard Speciication for Solvent Cement Other Applicable Standards: NSF Standard 1 NSF International UPC Plastic Piping System and Related Components IAPMO MADE IN USA page 1 of 7

2 ABS DWV FITTINGS FOR PLUMBING AND MECANICAL APPLICATIONS SOCKET DIMENSIONS AND TOLERANCES ABS-DWV Trade s 1-1/ A B Socket Entrance Diameter Socket Bottom Diameter C D W R Total Average Tol. A Out of Round Total Average Tol. A Out of Round Min Spigot & Socket Depth Min Internal Thread Depth Wall Thickness Min. Radius or Chamfer /1 1-1/ / / / /8.7 ±.00.1 ± /8 SIZING NOMENCLATURE FOR DWV FITTINGS Multi-Joint Fittings 1 = Bottom Outlet = Top Inlet = Main Branch = Branch, Side Inlet Two Joint Fittings 1 = Left Side of Fitting = Right Side of Fitting CONNECTION DESCRIPTIONS ub Sp Spigot (Pipe O.D.) SJ Slip Joint MPT Male Pipe Thread FPT Female Pipe Thread S/D Sewer & Drain NPSM National Pipe Straight Mechanical Thread CI Cast Iron All 90 Openings Pitch 1/ Per Foot (Exception - Vent Fittings) page of 7

3 PLASTIC FITTINGS PLUMBING ABS DWV STYLE NO. A COUPLING STYLE NO. AP TRAP ADAPTER, FEMALE, W / 1 PIECE POLY NUT x STYLE NO. A7 FLUS BUSING x x SJ ,0 7,00,800 1,0 STYLE NO. A1 FEMALE ADAPTER x ,00,00,00 STYLE NO. AW TRAP ADAPTER, FEMALE, W / PLASTIC NUT & WASER x SJ x FPT ,00 7,00,800 1, STYLE NO. A PIPE INCREASER / REDUCER x ,00,00,00,00 STYLE NO. AX TRAP ADAPTER, FEMALE, W / CROME NUT & WASER STYLE # x x x x x x x ,00 7,00 7,00,0,0 1,0 1,0 STYLE NO. A7S FLANGE BUSING W / TUBE STOP x STYLE #1 x 01 0 STYLE NO. A8 FLUS BUSING x SJ x ,00,00,00 x FPT STYLE # x x ,00 7,00 x x x x x x ,00 1, 1, STYLE NO. AP W / 1 PIECE POLY NUT STYLE NO. A FITTING CLEANOUT ADAPTER STYLE NO. A9 MALE ADAPTER x MPT x FPT ,00,00 1, 70 0 x ,00,00,00 STYLE NO. AR W / PLASTIC NUT & x WASER x ,00,00 STYLE NO. AX FITTING CLEANOUT ADAPTER W / CLEANOUT PLUG x ,00,00,,00 STYLE NO. AX W / CROME NUT & WASER ,0 7,00,00 70 x 09,00 STYLE NO. A111 MALE FITTING ADAPTER x FPT ,00,00 1,00 STYLE NO. A CLEANOUT PLUG x MPT ,00,00,00 1, x 087 7,00 STYLE NO. A11 TRAY PLUG ADAPTER MPT STYLE NO. AW W / PLASTIC NUT & WASER 1/ ,00 7,00,00,0, 70 STYLE NO. AP SLIP PLUG x NPSM TREAD 001,00 STYLE NO. A11S TRAY PLUG ADAPTER, IGOT x NPSM 019, x ,00,00 7, ,00 7,00 page of 7

4 STYLE NO. A11 TREADED CAP STYLE NO. A SLIP JOINT NUT FPT ,000 7, ,00 1,00,800 (FOR USE WIT 11/ SJ NUT) ,00,00 70 STYLE NO. A117 ADAPTER COUPLING S/D x DWV (ADAPTS SEWER & DRAIN PIPE TO DWV PIPE) x DWV x SD x ,000 0,000 81,000 STYLE NO. P1 ONE PIECE POLY NUT A ,00 18,000 STYLE NO. A00 1/ BEND x STYLE NO. A118 ADAPTER BUSING (Adapts DWV ub to S/D Spigot) , 1, ,000, x ,00 1,00 0 STYLE NO. A0 LONG SWEEP 1/ BEND W / IG EEL INLET x x x xx STYLE NO. A07 LONG SWEEP 1/ BEND W / LOW EEL INLET x x x xx STYLE NO. A09 LONG SWEEP 1/ BEND, STREET x ,00 1,00 0 STYLE NO. A 1/ BEND W / LOW EEL INLET STYLE NO. A00R 1/ BEND STYLE NO. A119 NO UB ADAPTER x x x (Adapts CI NO UB TO DWV PIPE) ,00 1,0 8 x 009 1,0 (ADAPTS CI UB TO DWV PIPE) x x x , STYLE NO. A1R UB ADAPTER, CAST IRON, INCREASER x x x , STYLE NO. A REPAIR COUPLING x x xx ,800,00 1, x x xx STYLE NO. A19 1/ BEND STYLE NO. A0 1/ BEND, STREET x ,00, STYLE NO. A0 1/ BEND, W / LOW EEL INLET ,880 0 STYLE NO. A0 1/ BEND, STREET x x x xx x x x (ADAPTS CI UB TO DWV PIPE) STYLE NO. A11 LONG SWEEP 1/ BEND W / SIDE INLET STYLE NO. A00S 1/ BEND, W / SIDE INLET x STYLE NO. A1 UB ADAPTER, CAST IRON x STYLE NO. A11 SLIP JOINT WASER STYLE NO. A11 SOCKET CAP NO x STYLE NO. A0 LONG SWEEP 1/ BEND x x xx xx ,0 70 STYLE NO. A11 TEST CAP - STYRENE ALL UB (NSF APPROVAL NOT AVAILABLE) ,00 1,00 7,00,00 page of 7

5 STYLE NO. A1 1/8 BEND STYLE NO. A0X CLOSET BEND,, W / TEST CAP x STYLE NO. A1 SANITARY TEE W / LEFT SIDE INLET xs ,00, STYLE NO. A 1/8 BEND, STREET ALL UB x STYLE NO. A1 VENT ELL x ,880 1,0 70 x ,00, STYLE NO. A 1/1 BEND STYLE NO. A VENT ELL x FPT ,00, STYLE NO. A 1/1 BEND, STREET x ,00, 90 0 x ,0 80 x x 009 STYLE NO. A8 CLOSET BEND,, SORT RADIUS x x 0 0 STYLE NO. A8X CLOSET BEND,, SORT RADIUS W / TEST CAP x x 0 0 STYLE NO. A9 CLOSET BEND, STYLE NO. A17 SANITARY TEE W / RIGT SIDE INLET ALL UB x x x xxx STYLE NO. A18 SANITARY TEE W / RIGT & LEFT SIDE INLET 80 x x x x 08 xxxx ,00 1,0 STYLE NO. A8 DOUBLE SANITARY TEE ALL UB STYLE NO. A00 SANITARY TEE ALL UB ,000 1, , STYLE NO. A9 DOUBLE SANITARY TEE, ALL UB STYLE NO. A01 SANITARY TEE, ALL UB STYLE NO. A7 DOUBLE 1/ BEND xxx x x x xxx ALL UB STYLE NO. A VENT ELL, STREET x x x x x x x x x x x x x x x x xx xx xx xx ,, 1,0 1, 1,00 1, x x x x x x x x x xxx xxx xxx STYLE NO. A1 DOUBLE SANITARY TEE, STREET, x x x xxx 0 0 STYLE NO. A8 DOUBLE SANITARY TEE W / SIDE INLET STYLE NO. A0 SANITARY TEE, STREET x x , 1,00 0 STYLE NO. A0 SANITARY TEE, STREET, ALL UB xxxx 077 STYLE NO. A9 DOUBLE SANITARY TEE W / RIGT & LEFT SIDE INLET ALL UB xxxxx 0770 x x x x STYLE NO. A0 CLOSET BEND, xs x x x x x x x x x xx , 1, 1,00 STYLE NO. A1 VENT TEE ALL UB , 80 page of 7

6 STYLE NO. AX CLEANOUT TEE WIT PLUG STYLE NO. A 1/8 BEND TWO PIECE x x FPT ALL UB ,0 1, , 1,0 0 STYLE NO. A8 TWO-WAY CLEANOUT ALL UB STYLE NO. A FIXTURE TEE x x FPT x x ,00 STYLE NO. A99 DOUBLE FIXTURE FITTING, STREET STYLE NO. A0 DOUBLE FIXTURE FITTING ALL UB STYLE NO. A1 1/8 BEND ONE PIECE ALL UB ,00 0 ALL UB x x x x x x x x xx xx xx ,0 STYLE NO. A11 DOUBLE WYE ALL UB 0 xx 07 8 STYLE NO. A7 DOUBLE COMBINATION WYE & 1/8 BEND, ASSEMBLED , 80 STYLE NO. A1 DOUBLE WYE, ALL UB STYLE NO. A00 WYE ALL UB ,80 1, ALL UB x x x x x x x x xx x x xx xx xx , , ALL UB x x x x x x xxx xxx xxx xxx STYLE NO. A RETURN BEND x , STYLE NO. A701 RETURN BEND W / CLEANOUT x ,0 70 STYLE NO. A70P TAIL PIECE ADAPTER (Plastic Nut) STYLE NO. A0 WYE, STREET (FINISED W/BOT SIZES SJ WASERS) x ,, x x STYLE NO. A0 WYE, STREET, STYLE NO. A70X P-TRAP W / SOLVENT WELD JOINT x ,00 9 x x STYLE NO. A 1/8 BEND, ONE PIECE STYLE NO. A01 WYE, x x x ALL UB x x FPT x x x x x x x x x xxx X X FPT STYLE NO. A 1/8 BEND, TWO PIECE STYLE NO. A FLUS CLEANOUT TEE STYLE NO. A0X CLEANOUT WYE W/ CLEANOUT PLUG x x xx xx xx STYLE NO. A0 CLEANOUT WYE STYLE NO. A707X P-TRAP W / SOLVENT WELD JOINT & CLEAN OUT x 0 0 1,080 X X FPT ,0 page of 7

7 STYLE NO. A708P P-TRAP W / UNION STYLE NO. A807 CLOSET FLANGE FEMALE x FIPT WIT SLOTS ,000 STYLE NO. A7 P-TRAP LOW PROFILE STYLE NO. A SWIVEL TRAY PLUG ADAPTER W/ WASER X NPSM Thread x 070 STYLE NO. A808 CLOSET FLANGE MALE x 00 x STYLE NO. A711M LA P-TRAP W / UNION & 1 PC POLY NUT x STYLE NO. A711P LA P-TRAP W / UNION & x NUT & POLY WASER SJ x x STYLE NO. A70X DRUM TRAP, W / CLEANOUT (W / SLOTS) x 0 STYLE NO. A8S CLOSET FLANGE, W / STOP, W / PLASTIC RING x x 0 0 STYLE NO. A800 CLOSET FLANGE (ONE PIECE WIT SLOTS) x 090 STYLE NO. A800S CLOSET FLANGE, W / STOP (ONE PIECE WIT SLOTS) x 090 (ONE PIECE WIT SLOTS & KNOCK OUT TEST CAP) x x ,00 x 00,00 X NPSM Thread 01,00 x 017,00 STYLE NO. A811 CLOSET FLANGE, W / METAL RING, EPOXY COATED (W / SLOTS) x x 07 0 STYLE NO. A81 CLOSET FLANGE, IGOT, W / METAL RING, EPOXY COATED x x STYLE NO. A81P CLOSET FLANGE, IGOT, W / PLASTIC RING x x 0 0 STYLE NO. A8 FLUS CLOSET FLANGE STYLE NO. A801 CLOSET FLANGE, IGOT, (EXTENDED) STYLE NO. A800KO CLOSET FLANGE, KNOCK OUT X NPSM Thread (W / SLOTS) x (W/PLUG),00 x STYLE NO. A9 SWIVEL TRAY PLUG ADAPTER W/ WASER (FURNISED W/BOT SIZE SJ WASERS) 018 STYLE NO. A8 CLOSET FLANGE, W / PLASTIC RING SJ x STYLE NO. AX SWIVEL TRAY PLUG ADAPTER W/ WASER MPT (ONE PIECE PLASTIC) x STYLE NO. A80 CLOSET FLANGE W / GUSSET (FITS OVER OR INSIDE SC 0 DWV PIPE) x/x 0 7 STYLE NO. A80 OFFSET CLOSET FLANGE, W / METAL RING, EPOXY COATED (ONE PIECE WIT NO SLOTS) x 0 x 090 page 7 of 7