ABS DWV FITTINGS APRIL 1, 2013

Transcription

1 LIST C ABS DWV FITTINGS APRIL 1, 2013 SUPERSEDES C (JUNE 1, 2012) Our website pricing is the current list price and may vary from our printed price list. Please visit our website for up-to-date information For products requiring bar coding, * Quantity revisions

2 LIST C APRIL 1, 2013 TERMS AND CONDITIONS OF SALE TERMS Cash discount 2% 15 days, net 30. The cash discount is allowed on merchandise only. Prices are subject to change and each order will be priced on the basis of prices in effect at the time of order. All orders are subject to approval of our office in Ontario, Canada. Possession of this price list does not necessarily constitute an offer by the Company to sell to the holder on the basis of the terms described hereon. MINIMUM ORDER $ net. TAXES Any and all sales, manufacturers taxes and/or other charges levied or imposed by any governmental authority, foreign or domestic, upon any merchandise sold or contacted to be sold shall be paid by Customer and added to the purchase price unless satisfactory and appropriate tax exception certificates are supplied to the Seller. OVERDUE INVOICES Interest charged at a rate of 1.5% per month on all overdue invoices. FREIGHT $ net for prepaid freight. All shipments are F.O.B. seller s factory or authorized warehouse. Prepaid orders will be shipped via the most economical route of our choice. If the Customer selects a route with a higher rate, the difference will be charged to the Customer. WEBSITE Our website pricing is the current list price and may vary from our printed price list. Please visit www. canplasplumbing.com for up-to-date information. Prices and product availability are subject to change without notice. While we try to ensure accuracy, we reserve the right to correct any errors in pricing or descriptions, and to cancel or refuse to accept any order based on an incorrect price or description. Such corrections may be made even after an order is accepted. SHIPPING RESPONSIBILITY Canplas responsibility ceases when the carrier signs for the shipment in good order. We cannot be responsible for loss or damage to goods in transit, or delays or carriers in delivering shipments or for damages resulting from such delays as those caused by fire, explosion, act of God, strike or other difference with workmen, shortage of material or labor, delays in transportation, government restrictions, war, riot, civil commotion or cause beyond our control. Where shortage or damage is apparent, details should be noted by the carrier on the freight bill at the time of delivery. In case of concealed damage, carrier should be called at once to inspect the damaged shipment. Do not return damaged goods. RETURNED GOODS A Returned Goods Authorization Form issued by Canplas must accompany goods which are returned. We reserve the right to refuse the return of any item that is not a regular stock item with Canplas. On items that are acceptable for credit, a restocking charge of twenty-five percent (25%) will be assessed against the credit to cover our handling, and/or inspecting or repackaging. Freight on returned goods will be the responsibility of the customer unless the reason for the return is due to defective goods. All goods returned must be in a saleable condition. WARRANTY Seller s products are carefully inspected for manufacturing defects, however, it is not always possible to detect hidden defects. Said products are warranted only to the extent that Seller will replace without charge, products proven to have manufacturing defects within 6 months of the date of delivery thereof and provided Seller has been given an opportunity to inspect the product alleged to be defective and the installation or use thereof. NO WARRANTY IS INCLUDED AGAINST ANY EXPENSE FOR REMOVAL, REINSTALLATION OR OTHER CONSEQUENTIAL DAMAGES ARISING FROM ANY DEFECT. THE WARRANTIES SET OUT ABOVE ARE THE ONLY WARRANTIES MADE BY SELLER AND ARE EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. CANPLAS INDUSTRIES LTD. reserves the right to change the aforementioned TERMS AND CONDITIONS OF SALE without notice. CAUTION The Seller does not recommend the use of thermoplastic piping systems for transport or storage of compressed air or other compressed gases or the testing of such systems with compressed air or other compressed cases, in exposed, above ground locations. Use of plastic piping products in exposed compressed gas systems voids our warranty for the products so used. For further information, contact your Canplas representative. OTHER In addition to sizes listed in this price list, other sizes may be available upon request. The product names used in this price list are for identification purposes only. All trademarks and registered trademarks are the property of their respective owners. TABLE OF CONTENTS Page Tees 3 Cleanouts 4 Cleanout Plugs 4 Adapters 4 Cleanout Adapters 4 90 Elbows 6 90 Closet Elbows 6 60 Elbows 6 45 Elbows /2 Elbows 7 Wyes 7 Double Fixture Fittings 8 Bushings 8 Adapter Bushings 8 Couplings 10 Adapter Couplings 10 Cast Iron Adapters 10 Expansion Joints 11 Primer Ports 11 P Traps 11 Drum Traps 13 Trap Adapters 13 Easy Open Closet Flanges 15 One Piece Closet Flanges 14 Reducing Closet Flanges 16 Adjustable Closet Flanges 16 Offset Closet Flanges Closet Flanges 16 Closet Flange Accessories 16 Urinal Flanges 17 Grates 18 Caps 18 Nipples 18 Test Plates 18 Termination Screens 18 Continuous Waste 18 Index 20 PRODUCT WARNING DO NOT USE oil based putty or pipe joint compounds with an ABS products. It will cause cracking and breakage of the ABS products over time PRODUCT CAUTION When installing threaded fittings, best practice requires that a suitable sealing medium, for example PTFE tape or non-oil based plumbers putty is used to both seal the joint and ensure a positive and correct fit. DO NOT OVER TIGHTEN

3 LIST C APRIL 1, 2013 TEES SANITARY TEE - H x H x H ¼ ½ ½ x 1¼ x 1½ ½ x 1½ x 1¼ ½ x 1¼ x 1¼ x 1½ x 1½ x 1½ x x 2 x 1¼ x 2 x 1½ x 3 x 1¼ x 3 x 1½ x 3 x x 4 x x 4 x x 6 x x 6 x Fitting uses bushing HORIZONTAL TWIN TEE x 3 x 1½ x 1½ from (Black) Exclusively Gray SANITARY TEE - H x FPT x H x 3 x SANITARY TEE - H x H x FPT IAPMO and CSA approval pending. SANITARY TEE, Street - Spg x H x H ½ x 3 x 1½ L x 3 x x 4 x x 6 x SANITARY TEE, with Left Side Inlet - H x H x H x H L x 3 x 3 x 1½ L x 3 x 3 x SANITARY TEE, with Right Side Inlet - H x H x H x H R x 3 x 3 x 1½ R x 3 x 3 x SANITARY TEE, with Right & Left Side Inlets - H x H x H x H x H LR x 3 x 3 x 1½ x 1½ LR x 3 x 3 x 2 x For products requiring bar coding, * Quantity revisions

4 LIST C APRIL 1, 2013 TEES Continued CLEANOUTS DOUBLE SANITARY TEE - H x H x H x H CLEANOUT PLUGS CLEANOUT PLUG, with O-ring - MPT ½ x 2 x 1½ x 1½ x 1½ x 1½ x 1½ x 3 x 1½ x 1½ x 3 x 2 x x 4 x 3 x Fitting uses bushing DOUBLE SANITARY TEE, with Side Inlet - H x H x H x H x H L x3x3x3x1½ CLEANOUT TEE with Plug & O-ring - H x H A ½ A A A A REDUCING LINE CLEANOUT with Plug & O-ring - H x H A x 3 x LINE CLEANOUT TEE, with Plug & Side Inlet - H x H A ¼ ½ ADAPTERS MALE ADAPTER - MPT x H ¼ ¼ x 1½ ½ FEMALE ADAPTER - H x FPT ¼ ½ CLEANOUT ADAPTERS FITTING CLEANOUT ADAPTER, with Plug and O-ring - Spg x FPT A ¼ A ½ A A A A FITTING CLEANOUT ADAPTER - Spg x FPT ¼ ½ TUBE END CLEANOUT, with Plug & O-ring - H x FPT A ¼ A ½ A A A COUNTERSUNK PLUG - MPT For products requiring bar coding, * Quantity revisions

5 No more glued in test plates No more mechanical test plugs or test balls ABS DWV FITTINGS LIST C APRIL 1, x 3 Reducing Line Cleanout with Test Membrane New! Innovative test membrane from Canplas enables mess-free removal of the test membrane after a water test. from Exclusively By puncturing the PVC membrane with a utility knife, wastewater is drained slowly, avoiding the typical torrent of wastewater mess with other test methods. Simply remove the membrane with a knife after the system is tested. REDUCING LINE CLEANOUT WITH TEST MEMBRANE H x H with Plug & O-ring AT x 3 x For products requiring bar coding, * Quantity revisions

6 LIST C APRIL 1, ELBOWS 1/4 BEND (90 ) - H x H ¼ ½ /4 BEND (90 ), LONG TURN - H x H ½ x L ¼ L ½ L L L /4 BEND, Street (90 ), LONG TURN - Spg x H L ½ L L L /4 BEND (90 ), LONG SWEEP - H x H ¼ ½ /4 BEND, Street (90 ), LONG SWEEP - Spg x H ½ /4 BEND, Street (90 ) - Spg x H ¼ ½ CLOSET ELBOWS CLOSET BEND, Reducing - H x H x CLOSET BEND, Reducing with Test Cap - H x H x ELBOWS 1/6 BEND, (60 ) - H x H ½ /6 BEND (60 ), LONG TURN - H x H L L ELBOWS 1/8 BEND (45 ), LONG TURN - H x H ½ /8 BEND (45 ), SHORT TURN - H x H ¼ ½ For products requiring bar coding, * Quantity revisions

7 LIST C APRIL 1, º ELBOWS Continued 1/8 BEND, Street (45 ), LONG TURN - Spg x H 1/8 BEND, Street (45 ), SHORT TURN - Spg x H ¼ ½ ¼ ½ /2 ELBOWS 1/16 BEND (22½ ) - H x H ¼ ½ WYES WYE - H x H x H ¼ ½ ½x1½x1¼ x 3 x 1¼ x 1½ x 1½ x 2 x 1½ x 3 x 1½ x 3 x x 4 x x 4 x 1½ x 4 x x 6 x x 6 x WYE, Street - Spg x H x H /16 BEND, Street (22½ ) - Spg x H Visit our website for more information Specification Sheets E-Newsletter Price Lists ½ REDUCING WYE, Street - Spg x H x H x 3 x 1½ LONG TURN TEE WYE, Single - H x H x H ½ x 1½ x 1½ x 1½ x x 2 x 1½ x 3 x 1½ x 3 x x 4 x x 4 x For products requiring bar coding, * Quantity revisions

8 LIST C APRIL 1, 2013 WYES Continued DOUBLE WYE - H x H x H x H APPLIANCE ADAPTER - Spg x Hose Barb ½ x ½ ½ x 2 x 1½ x 1½ x 3 x 1½ x 1½ x 3 x 2 x x 4 x 2 x x 4 x 3 x DOUBLE WYE, Street - Spg x H x H x H x 3 x 1½ x 1½ BUSHINGS FLUSH BUSHING - Spg x H ½ x 1¼ x 1¼ x 1½ x 1½ x x 1½ x x x x FLUSH BUSHING - Spg x FPT ½ x ½ ½ x ¾ ½ x 1¼ x 1½ Can be used for either dishwasher or condensate connections when combined with thread x barb nipple DOUBLE FIXTURE FITTINGS DOUBLE FIXTURE FITTING - H x H x H x H x 1½ x 1½ x 1½ x 1½ x 2 x x 1½ x 1½ x x 2 x 3 x Fitting uses bushing DOUBLE 1/4 BEND - H x H x H ½ ADAPTER BUSHINGS ADAPTER BUSHING - (Adapts Sewer Hub to DWV Spigot) Sewer Spg x DWV Hub x ADAPTER BUSHING - (Adapts DWV Hub to Sewer & Drain Spigot) Spg x H x For products requiring bar coding, * Quantity revisions

9 LIST C APRIL 1, 2013 Appliance / Dishwasher Wye For roughing in or installing a dishwasher, water softener or any appliance with a 1/2 or 3/4 discharge hose. Features Injection molded in ABS (Black) and PVC (Gray). Top and bottom sockets are 1 1/2 DWV (Schedule 40) size. Branch arm is a 1/2 or 3/4 hose barb. Unit comes complete with molded on plug. Plug will hold test without solvent cementing. Saves time and money. CSA certified NSF, IAPMO listed Installation from Exclusively APPLIANCE WYE/GREYWATER TRAP PRIMER - H x H x Hose Barb Snap-in Plug is Molded on Fitting for Use During Rough-In ½ x 1½ x ½ ½ x 1½ x ¾ ½ x 1½ x Single sink installation. Alternative use as greywater trap primer Double sink installation. For rough-in, insert plug into hose barb. When installing an appliance, simply remove plug and attach hose. Plug has oversized top to prevent installation of hose with plug still in place. Can be installed vertically or horizontally. The greywater trap primer port fitting used the head of water in the p-trap, to allow a small amount of water to flow through the primer hose, ensuring the connected floor drain trap seal is maintained. For products requiring bar coding, * Quantity revisions

10 LIST C APRIL 1, 2013 COUPLINGS ADAPTER COUPLINGS COUPLING - H x H ¼ ½ REPAIR COUPLING (No Pipe Stop) - H x H R ½ R R R Non CSA REDUCER COUPLING - H x H ¼ x 1½ ¼ x ¼ x x 1½ x 1½ x x 1½ x x x x ADAPTER COUPLING (Adapts Sewer & Drain to DWV) - H x H x x CAST IRON ADAPTERS SPIGOT ADAPTER, Cast Iron (Adapts Cast Iron Spigot to DWV Spigot) - H x H HUB ADAPTER, Cast Iron (Adapts DWV Spigot to Cast Iron Hub) x 4 CI NO HUB ADAPTER, Cast Iron (Adapts No Hub Elastomer Coupling to DWV Spigot) - H x Spg ½ x 1½ x EXPANSION JOINTS from Exclusively ADAPTER COUPLING (Adapts Sewer & Drain to DWV) - Spg x H BC 25 4 x Allows for the expansion and contraction of pipe due to temperature change and the shrinkage of building materials that the pipe is connected to. For products requiring bar coding, * Quantity revisions

11 LIST C APRIL 1, 2013 EXPANSION JOINT - H x H EXPANSION JOINTS Now approved for Horizontal Applications TYPE I - 3 Travel ABC ½ ABC ABC TYPE II - 8 Travel ABC EXPANSION JOINT - H x Spg End Piston TYPE I - 3 Travel BBC ½ BBC BBC Materials Injected molded in ABS (Black) and PVC (Gray) Nitrile Buna-N O-ring. PQAA Grease #2 lubricant Features Allows for up to 3 (7.6 cm) of travel (Type I) or 8 (20.3 cm) of travel (Type II) Flow direction and proper degree of extention indicated on expansion joint PRIMER PORTS Benefits Allows movement without leakage Removes the stress from both pipe and fittings which could cause failure of the piping system Applications For Drain, Waste & Vent applications (non-pressure) For Log Homes For straight pipe runs of 30 ft. (9.1 m) Approvals CSA Certified, IAPMO Listed Approved for use in vertical and horizontal applications P TRAP PRIMER PORT - Spg x Spg x FPT x 3 x ½ P TRAPS P TRAP, with Solvent Weld Joint - H x H ¼ ½ x P TRAP, with Cleanout & Solvent Weld Joint - H x H A ¼ A ½ A P TRAP, with Cleanout & Union Connection - H x H A ¼ A ½ AG^ ½ A ^Gasketed Cleanout P TRAP U-Bend - H x H P TRAP, with Union - H x H E ¼ E ½ E GREYWATER TRAP PRIMER - H x H x Hose ½ x 1½ x ½ S TRAP, with Solvent Weld Joint - H x H ½ Grey Water Installation The gray water trap primer port fitting used the head of water in the p-trap, to allow a small amount of water to flow through the primer hose, ensuring the connected floor drain trap seal is maintained. S TRAP, with Solvent Weld Joint with Cleanout - H x H ABC ½ POLYETHYLENE GASKET for PermOseal P Trap For products requiring bar coding, * Quantity revisions

12 LIST C APRIL 1, 2013 Kitchen and Bathroom P-Traps Material Available in ABS (Black) and PVC (Gray) with or without cleanout. from Exclusively 10 (Patent # 6,859,956) PERMOSEAL P TRAP with Union Connection & Cleanout - H x H A ½ Connection Adjustable joint allows up to 10 of angle adjustment providing ease of installation in situations with pipe misalignment or offset fittings while maintaining a secure seal. PERMOSEAL P TRAP, with Union Connection - H x H E ½ For products requiring bar coding, * Quantity revisions

13 LIST C APRIL 1, 2013 P TRAPS Continued TRAP ADAPTERS Continued THREADED PLUG FOR 1-1/2 S TRAP Used for A TRAP ADAPTER, with One-piece Poly Nut - H x Slip A ¼ A ½ A ¼ x 1½ P TRAP CLEANOUT CAP with Gasket DRUM TRAPS DRUM TRAP - H x H ABC ½ Used for A & A and earlier and AS, A & A - all years P TRAP CLEANOUT CAP self sealing (no gasket) ½ Used for A & A and newer A ½ FITTING TRAP ADAPTER, with Washer & Nut - Spg x Slip ¼ A ¼ A ½ A Y ½ x 1¼ FITTING TRAP ADAPTER, with One-piece Poly Nut - Spg x Slip A ¼ A ½ A ¼ x 1½ FITTING TRAP ADAPTER, less Washer & Nut (Fitting Male Adapter) - Spg x MPT ½ IN-1 COMBINATION TRAP ADAPTER - H x Slip A ½ x 1½ x 1¼ TRAP ADAPTERS SANITARY TEE TRAP ADAPTER - H x H x Slip Joint A ½ TRAP ADAPTER - H x Slip Joint, Ideal for Pedestal Sinks A ½ x 1¼ A ½ x 1½ COPPER TO DWV PIPE ADAPTER - H x Slip A ¼ A ½ A ½ x 1¼ A A x 1½ CSA certified for use in P Trap area only SANITARY TEE SINK STRAINER ADAPTER H x H x Strainer Adapter (with Gasket) A ½ TRAP ADAPTER, with Washer & Nut - H x Slip A ¼ A ½ A ½ x 1¼ A SINK STRAINER ADAPTER H x Strainer Adapter (with Gasket) A ½ For products requiring bar coding, * Quantity revisions

14 LIST C APRIL 1, 2013 TRAP ADAPTERS Continued TRAY PLUG ADAPTER - Spg x FPT ½ TRAY PLUG ADAPTER - H x FPT ½ ONE PIECE CLOSET FLANGES CLOSET FLANGE, One Piece Plastic - Hub End with Gussets x CLOSET FLANGE, One Piece Plastic - With Molded Test Plate T x SWIVEL TRAY PLUG (STRAINER) ADAPTER, with Washer H x FPT ½ ¼ x 1½ SWIVEL TRAY PLUG (STRAINER) ADAPTER, with Washer Spg x FPT ½ SWIVEL TRAY PLUG (STRAINER) ADAPTER, with Washer Ext. Spg x FPT ½ ¼ x 1½ UNION A ½ CLOSET FLANGE, One Piece Plastic - Hub x CLOSET FLANGE, One Piece Plastic - Hub Flush Fit x Without Pipe Stop X x SDRBC x With molded test plate T x Fits over 3 or inside 4 Schedule 40 DWV pipe Fits over 3 DWV or inside 4 SDR 35 pipe CLOSET FLANGE KIT FOR CONCRETE AND TILED FLOORS For Use in Slab on Grade Closet Flange Installations With test plate A x Without test plate B x SLIP JOINT NUT ¼ ½ SLIP JOINT WASHER ¼ ½ Warning Canplas recommends sponge rubber and wax gaskets only for use with all closet flanges. For products requiring bar coding, * Quantity revisions

15 LIST C APRIL 1, 2013 New! No more hammers No more damage! No Hammer- Easy Open Test Cap Closet Flanges Innovative test membrane from Canplas enables mess-free removal of the test membrane after a water test. Simply remove the membrane with a knife after the system is tested. Patent Pending CanplasEO, No Hammer/Easy Open TEST MEMBRANE CLOSET FLANGE Hub with Adjustable Ring (3 hub, or 4 inside pipe fit) EO x Hub with Adjustable Ring (3 Hub) EO x Discharge Closet Flange (3 Hub) EO 20 4 x Hub Flush Fit, One Piece Plastic (3 Hub) EO 25 4 x from Exclusively 15 p.s.i. Test Rating For products requiring bar coding, * Quantity revisions

16 LIST C APRIL 1, 2013 REDUCING CLOSET FLANGES CLOSET FLANGE, Reducing - 2½ Overall (Spg) x OFFSET CLOSET FLANGES 3 OR 4 OFFSET 2 CLOSET FLANGE x CLOSET FLANGE, Reducing - 1¾ Overall (FPT) x 3 Close CLOSET FLANGE, Reducing - 1¾ Overall (MPT) x 3 Close OFFSET CLOSET FLANGE - Hub (Offset 1½ ) x (with molded test plate) T x Non CSA CLOSET FLANGE, Reducing - 2¼ Overall (MPT) x 3 Long ADJUSTABLE CLOSET FLANGES CLOSET FLANGE, Adjustable Hub End, Flush Fit with Adjustable Plastic Ring x Hub End, with Adjustable Plastic Ring x Spigot End, with Adjustable Plastic Ring x Hub End, with molded test plate T x Hub End, with molded test plate T x Spigot End, with molded test plate T x CLOSET FLANGES 45 DISCHARGE CLOSET FLANGE - Hub (with adjustable plastic ring) x (with adjustable stainless steel ring) SS x CLOSET FLANGE ACCESSORIES ADAPTER Only for Closet Flange Kit for Concrete - H x Spg x CLOSET FLANGE SPACER RING x ADJUSTABLE CLOSET FLANGE for 3 Pipe I.D. (Non CSA) x CLOSET FLANGE SPACER RING x For products requiring bar coding, * Quantity revisions

17 LIST C APRIL 1, 2013 Used to provide a seal between 2 internally trapped urinals and drainage system. Urinal Flange Kits Flanges are made of corrosion resistant ABS and PVC plastic. They will not rot out like traditional urinal flanges providing longer life and fewer health concerns. 2 connections available in Hub and Spigot versions making Canplas urinal flange kits adaptable to a variety of systems. Complete with all the necessary mounting hardware eliminating missing or back-ordered parts. Adjustable 4-7 center which can be cut easily to accommodate the requirements of most applications. The flange is reinforced with a cross rib to prevent the fork from spreading. Thick foam gasket provides a positive seal, reducing the potential for leaks. from Exclusively URINAL FLANGE KIT - ABS Spigot URINAL FLANGE KIT - ABS Hub with 4 Center with Adjustable Center: 4-7 For products requiring bar coding, * Quantity revisions

18 LIST C APRIL 1, 2013 GRATES DRAIN GRATE - Spg CAPS ABS CAP - Hub NIPPLE - MPT x MPT TEST PLATE - Spg POLYETHYLENE CAP Slip-on Style - Orange NIPPLES ¼ ½ TC ¼ TC ½ TC TC TC TC x x x TEST PLATES ½ TERMINATION SCREENS CONTINUOUS WASTE TERMINATION SCREEN - Polypropylene Black Polypropylene White Polypropylene W W W CONTINUOUS WASTE END OUTLET - TUBULAR 16 Long (Center to Center) - DIRECT CONNECT ABC ½ CONTINUOUS WASTE CENTER OUTLET - TUBULAR 16 Long - DIRECT CONNECT ABC ½ CONTINUOUS WASTE TRAP ADAPTER STYLE End Outlet (pipe not included) - SLIP JOINT ABC Consisting of: (1) A 1½ 90 Trap Adapter (1) A 1½ Sanitary Tee Trap Adapter (1) ½ x 1½ x ½ Appliance Wye For products requiring bar coding, * Quantity revisions

19 LIST C APRIL 1, 2013 CONTINUOUS WASTE Continued CONTINUOUS SINK STRAINER ADAPTER STYLE End Outlet (pipe not included) - DIRECT CONNECT ABC APPROVALS: Unless otherwise noted, products are approved / listed by CSA International, NSF and IAPMO to standards that include: CSA B79, B181.1 NSF Standard 14 IAPMO IS5, PS ASTM D2665, D1784, D3311 Consisting of: (1) A 1½ 90 Sink Strainer Adapter (1) A 1½ Sanitary Tee Sink Strainer Adapter (1) ½ x 1½ x ½ Appliance Wye CONTINUOUS SINK TRAP ADAPTER STYLE Center Outlet(pipe not included) - SLIP JOINT ABC Consisting of: (2) A 1½ 90 Trap Adapters (1) ½ Double ¼ Bend, H x H x H (1) ½ x 1½ x ½ Appliance Wye CONTINUOUS SINK STRAINER ADAPTER STYLE Center Outlet (pipe not included) - DIRECT CONNECT ABC Consisting of: (2) A 1½ 90 Sink Strainer Adapters (1) ½ Double ¼ Bend, H x H x H (1) ½ x 1½ x ½ Appliance Wye For products requiring bar coding, * Quantity revisions

20 LIST C APRIL 1, 2013 INDEX PART# Weight (Kgs.) CARTON BARCODE PG. # A A A A A A A L LR R L LR R L L L L L L PART# Weight CARTON PG. # (Kgs.) BARCODE L L L L L L PART# Weight (Kgs.) CARTON BARCODE PG. # A A A A A A A A A A A A A A A A A A A A A A A A A R R For products requiring bar coding, * Quantity revisions

21 LIST C APRIL 1, 2013 PART# Weight (Kgs.) CARTON BARCODE PG. # R R ABC A A A A E A AG E Y A E A E PART# Weight (Kgs.) CARTON BARCODE PG. # A ABC BC T T T T SDRBC X T T A A A A A A ABC ABC ABC ABC ABC PART# Weight (Kgs.) CARTON BARCODE PG. # ABC L TC TC TC TC TC TC W W W AT A A A A A EO EO EO SS EO A For products requiring bar coding, * Quantity revisions

22 LIST C APRIL 1, 2013 PART# Weight CARTON PG. # (Kgs.) BARCODE B ABC BBC ABC BBC ABC BBC ABC PART# Weight CARTON PG. # (Kgs.) BARCODE PART# Weight CARTON PG. # (Kgs.) BARCODE

23 LIST C APRIL 1, 2013 NOTES:

24 Head Office, Manufacturing Location and Customer Service Centre 500 VETERANS DRIVE, BOX 1800 BARRIE, ON L4M 4V3 CANADA TELEPHONE: (705) FAX: (705) Customer Service Centre and Sales Office STREET, UNIT 201 LANGLEY, B.C. V1M 3A7 CANADA TELEPHONE: (604) FAX: (604) Customer Service Centre and Sales Office rd STREET EDMONTON, AB T5M 3T3 CANADA TELEPHONE: (780) FAX: (780)