DWV PVC DWV Drain Waste Vent Fittings
|
|
- Allison Chambers
- 6 years ago
- Views:
Transcription
1 STANDARDS & SPECIFICATIONS Standards provide greater assurance of product performance and consistency, and are available to assist design engineers in system specification. The most frequently referenced industry standards for plastic piping systems are ASTM Standard Specifications and Practices. Along with ASTM Standards, additional product specifications and certifications form the basis of product conformance to which Spears products are manufactured. ASTM D 2665 Poly (Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings. ASTM D 3311 Drain, Waste, and Vent (DWV) Plastic Fittings Patterns. ASTM F 1866 Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings. ASTM D 1784 Rigid Poly (Vinyl Chloride) (PVC) Compounds and Chlorinated Poly (Vinyl Chloride) (CPVC) Compounds. NSF International Standard 14 (NSF -dwv) Certified NSF International Certified to Uniform Plumbing (NSF -U.P. ) See official listing P100 Coupling P / P P P P P P P P P101 Female Adapter FPT x H P / P P P P Pipe Increaser - Eccentric Reducer P E 3X E 3* 6X E 2* 6X E 2 6X E 3* 8X E 2* 8X E * 8X E 2* 10X E * 10X E * 10X E 3* 12X E 2* 12X E 2* 12X E * 12X P102 Pipe Increaser - Reducer P X1-1/ P X1-1/ P X P X P X * 6X * 6X P X P X P X * 10X P X * 10X P X * 10X * 12X * 12X * 12X * 12X P X * 12X * 14X * 14X * 14X * 14X * 14X * 14X P103 Trap Adapter - Male S x SLIP P / P P103P Trap Adapter - Male S x SLIP w/plastic Nut - Built-in Washer P103P /2X1-1/ P103P / P103P P103R Trap Adapter - Male with 1-1/2 Plastic Nut & Washer and 1-1/2 x1-1/4 Washer S x SLIP w/plastic Nut P103R / Page 535 NOT FOR DISTRIBUTION OF COMPRESSED AIR OR GAS Spears Manufacturing Company Due to Material Cost Variations, s Subject to Change. Check On-line
2 P103X Trap Adapter-Male S x SLIP w/chrome Nut & Washer P103X /2X1-1/ P103X / P103X P104 Trap Adapter - Female LIP P / P P104P Trap Adapter - Female LIP w/plastic Nut P104P /2X1-1/ P104P / P104P / P104R Trap Adapter - Female w/1-1/2 Plastic Nut & Washer and 1-1/2x1-1/4 Washer LIP w/plastic Nut P104R / P104X Trap Adapter - Female LIP w/chrome Nut & Washer P104X /2X1-1/ P104X / P104X P000P HDPE Slip Joint Nut (Plastic Nut) P000P / P000P P000P /4X1-1/ P105 Fitting Cleanout Adapter S x FPT P / P P P P P P105H Female Cleanout Adapter H x FPT P105H P105H P105X Fitting Cleanout Adapter w/c.o. Plug S x FPT P105X / P105X P105X P105X P105X P105X * P105X Fitting Cleanout Adapter w/c.o. Plug (continued) S x FPT * * PVC Gray with HDPE Plug P106 Cleanout Plug MPT P / P P / P P P P P107 Flush Bushing S x H ¹Outlet-sized with Bushing P X1-1/ P X1-1/ P X P X P X P X P X P X P X P X P X P X P X P X ¹Bushed P108 Flush Bushing (Cleanout Adapter) S x FPT P X P X P108X Flush Bushing (Cleanout Adapter) w/plug S x FPT P108X X P108X X P109 Male Adapter (Will not accept tail piece) MPT x H P / P P P P P110 Flush C.O. Plug MPT P / P P / P Made in the U.S.A. NOT FOR DISTRIBUTION OF COMPRESSED AIR OR GAS Page 536 Due to Material Cost Variations, s Subject to Change. Check On-line
3 P110 Flush C.O. Plug (continued) MPT P P P116 Cap SOC P / P P P P P * * * Note: 8" Cap is Domed Style P117 Adapter Coupling (Adapts S&D Spigot to DWV Spigot) P P X P118 Adapter Bushing (Adapts DWV Hub to S&D Spigot) DWV SPIGOT x HUB P P P119 No-Hub Adapter S x H P / P P P P X1-1/ P X P122 Spigot Adapter, Cast Iron P P123 Hub Adapter, Cast Iron P P P P123R Hub Adapter, Cast Iron, Increaser (Plain End: Joint can be made with compression gasket or plastic lead & seal rope - Do Not use hot lead) P123R /2X P123R-342 3X P130 Repair Coupling P / P130 Repair Coupling (continued) P P P P P P P131 Test Cap P / P P P P300 1/4 Bend P / P P P P P P P P300S 1/4 Bend with Side Inlet P300S-338 3X3X P302 1/4 Bend, Street S x H P / P P P P P P P P303 1/4 Bend w/low Heel Inlet x H P X3X P X4X P304 Long Sweep 1/4 Bend P / P P P P " size assembled from 2-Molded 1/8 Bends P309 Long Sweep 1/4 Bend, Street P / Page 537 NOT FOR DISTRIBUTION OF COMPRESSED AIR OR GAS Spears Manufacturing Company Due to Material Cost Variations, s Subject to Change. Check On-line
4 P309 Long Sweep 1/4 Bend, Street (continued) P P P P P310 1/4 Bend, Street w/low Heel Inlet x H P X3X P319 1/6 Bend P / P P P * * * * * P320 1/6 Bend, Street H X S P / P P P P321 1/8 Bend P / P P P P P P P * P323 1/8 Bend, Street P / P P P P P * * * P324 1/16 Bend P / P324 1/16 Bend (continued) P P P P P * * * P326 1/16 Bend, Street P / P P P P P * * * P327 Double 1/4 Bend x H P / P P P P327 Double 1/4 Bend, Reducing x H P X1-1/2X1-1/ P329 Closet Bend, Reducing P X P330 Closet Bend, Reducing P X P330X Closet Bend, Reducing with TEST CAP P330X-342 3X P331 Vent Ell P / P P P P P P P * Made in the U.S.A. NOT FOR DISTRIBUTION OF COMPRESSED AIR OR GAS Page 538 Due to Material Cost Variations, s Subject to Change. Check On-line
5 P331 Vent Ell (continued) P401 Sanitary Tee, Reducing (continued) P333 Vent Ell, Street P403 Sanitary Tee, Street S x P / P P P * * * * * P400 Sanitary Tee P / P P P P P P P * P401 Sanitary Tee, Reducing P X1-1/2X1-1/ P X2X1-1/ P X1-1/2X P X3X1-1/ P X3X P X4X P X4X * 6X * 6X P X * 8X * 8X * 8X * 8X * 10X * 10X * 10X * 10X * 10X * 12X * 12X * 12X * 12X * 12X * 12X * 14X * 14X * 14X * 14X * 14X * 14X * 14X P / P P P P P P P P404 Sanitary Tee, Street, Reducing S x P X1-1/2X1-1/ P X2X1-1/ P X1-1/2X P X3X1-1/ P X3X P X4X P X4X P416 Sanitary Tee with Left Side Inlet P X3X3X1-1/ P X3X3X P X4X4X P417 Sanitary Tee with Right Side Inlet P X3X3X1-1/ P X3X3X P X4X4X P418 Sanitary Tee with R&L Side Inlets P X3X3X1-1/ P X3X3X2X P X4X4X2X P428 Double Sanitary Tee P / P P P * * * * * P429 Double Sanitary Tee, Reducing P X2X1-1/2X1-1/ Page 539 NOT FOR DISTRIBUTION OF COMPRESSED AIR OR GAS Spears Manufacturing Company Due to Material Cost Variations, s Subject to Change. Check On-line
6 P429 Double Sanitary Tee, Reducing (continued) P X3X1-1/2X1-1/ P X3X2X P X4X1-1/2X1-1/ P X4X2X P X4X3X * 6X * 6X * 6X * 8X * 8X * 8X * 8X * 10X * 10X * 10X * 10X * 10X * 12X * 12X * 12X * 12X * 12X * 12X * 14X * 14X * 14X * 14X * 14X * 14X * 14X P439 Double Sanitary Tee with R&L Side Inlets P X3X3X3X2X P X4X4X4X2X P441 Vent Tee P / P P P P P P P * P442 Vent Tee, Reducing P X1-1/ * 6X * 6X P X * 8X * 8X P X P X * 10X * 10X P442 Vent Tee, Reducing (continued) P X P X P X * 12X * 12X P X P X P X P X * 14X * 14X * 14X * 14X * 14X * 14X * 14X Test Tee SOC x FPT with Plug TEST * TEST * TEST * TEST * P444X Cleanout Tee w/c.o. Plug P444X / P444X P444X P444X P444X P445 Flush C.O. Tee x FPT P / P P P P P445X Flush C.O. Tee w/c.o. Plug P445X / P445X P445X P445X P445X P447 Horizontal Twin Tee P X3X1-1/2X1-1/ P448 2-WAY Cleanout P P Made in the U.S.A. NOT FOR DISTRIBUTION OF COMPRESSED AIR OR GAS Page 540 Due to Material Cost Variations, s Subject to Change. Check On-line
7 P500 Double Fixture Fitting P X2X2X P X3X3X P X1-1/2X1-1/2X1-1/ P X2X1-1/2X1-1/ P X2X3X P501 Combination Wye and 1/8 Bend (One Piece) P / P P P * * * * * P502 Combination Wye and 1/8 Bend, Reducing (One Piece) P X2X1-1/ P X3X1-1/ P X3X P X4X P X4X * 6X * 6X * 8X * 8X * 10X * 10X * 10X * 10X * 10X * 12X * 12X * 12X * 12X * 12X * 12X * 14X * 14X * 14X * 14X * 14X * 14X * 14X P503 Combination Wye and 1/8 Bend (Two Piece) P P P P P P P504 Combination Wye and 1/8 Bend, Reducing (Two Piece) P X P X P X P X P * 8X P X P * 10X P * 10X P X P X P X P X P X P * 12X * Bushed P507 Double Combination Wye and 1/8 Bend P / P P P P X2X1-1/2X1-1/ P X3X2X P X4X2X P X4X3X * * * * * * 6X * 6X * 6X * 8X * 8X * 8X * 8X * 10X * 10X * 10X * 10X * 10X * 12X * 12X * 12X * 12X * 12X * 12X * 14X * 14X * 14X * 14X * 14X * 14X * 14X P515 Combination Wye and 1/8 Bend with Left Side Inlet P X3X3X Page 541 NOT FOR DISTRIBUTION OF COMPRESSED AIR OR GAS Spears Manufacturing Company Due to Material Cost Variations, s Subject to Change. Check On-line
8 P516 Combination Wye and 1/8 Bend with Right Side Inlet P X3X3X P517 Combination Wye and 1/8 Bend with R&L Side Inlets P X3X3X P600 Wye P / P P P P P P P * P601 Wye, Reducing P X1-1/2X1-1/ P X2X1-1/ P X1-1/2X P X3X1-1/ P X3X P X4X1-1/ P X4X P X4X P X6X P X6X P X6X P X8X * 8X P X8X P X8X * 10X * 10X P X10X P X10X * 10X P X10X * 12X * 12X * 12X P X12X P X12X * 12X P X12X * 12X P X12X * 14X * 14X * 14X * 14X * 14X * 14X * 14X * 16X * 18X P601 Wye, Reducing (continued) * 20X * 24X P602 Wye, Street S x P / P P P P603 Wye, Street, Reducing S x P X2X1-1/ P X4X P X4X P611 Double Wye P / P P P P * * * * P611S Double Wye, with 2" Side Inlet P611S P612 Double Wye, Reducing P X2X1-1/2X1-1/ P X3X1-1/2X1-1/ P X3X2X P X4X2X P X4X3X * 6X * 6X P X6X4X * 8X * 8X * 8X * 8X * 10X * 10X * 10X * 10X * 10X * 12X * 12X * 12X * 12X * 12X * 12X Made in the U.S.A. NOT FOR DISTRIBUTION OF COMPRESSED AIR OR GAS Page 542 Due to Material Cost Variations, s Subject to Change. Check On-line
9 P612 Double Wye, Reducing (continued) * 14X * 14X * 14X * 14X * 14X * 14X * 14X * 16X * 18X * 20X * 24X P335 Trap Elbow (for use with Traps only) P P P700 Return Bend P / P P P P P P704P Tail Piece Adapter S x SLIP w/plastic Nut - Built-in Washer P704P / P704X Tail Piece Adapter S x SLIP w/chrome Nut & Washer P704X / P706X P-Trap P706X / P706X P706X P706X P706X P706X P706X P706X P707X P-Trap w/cleanout P707X / P708P Adjustable P-Trap w/plastic Nut P708P / P708P P711P L.A. Pattern P-Trap w/plastic Nut SLIP x H w/plastic Nut & Washer P711P /4X1-1/ P711P / P711X L.A. Pattern P-Trap w/chrome Nut SLIP x H w/chrome Nut & Washer P711X / P800 Closet Flange H P X P X P800G Closet Flange w/gussets H P800G P800KO Closet Flange with Knockout H P800KO-422 4X P800S Closet Flange with Stop H P800S-422 4X P801 Closet Flange, Reducing SPIGOT P X P811 Closet Flange w/adjustable Metal Ring H P P X P811KO Closet Flange w/adjustable Metal Ring and Knockout H P811KO-422 4X P812 Closet Flange w/adjustable Metal Ring SPIGOT P P X P813 Flush Closet Flange w/adjustable Metal Ring Fits Over 3" Pipe or Inside 4" Pipe P X P815 Flush Closet Flange Fits Over 3" Pipe or Inside 4" Pipe P X4 / 4X Page 543 NOT FOR DISTRIBUTION OF COMPRESSED AIR OR GAS Spears Manufacturing Company Due to Material Cost Variations, s Subject to Change. Check On-line
10 P815KO Flush Closet Flange with Knockout Fits Over 3" Pipe or Inside 4" Pipe P815KO-040 4X4 / 4X P820 Offset Closet Flange w/adjustable Metal Ring (1-1/2" Offset) H P X Uniform Plumbing does not accept offset closet flanges Floor Drain with Stainless Steel Adjustable Top w/round Grate P S 1-1/2X P S 1-1/2X P S 1-1/2X P S 1-1/2X P S 2X P S 2X P S 2X P S 2X P S 3X P S 3X P S 3X P S 3X P S 4X P S 4X P S 4X P S 4X Floor Cleanout w/stainless Steel Adjustable Round Top, Solid Access Cover & Membrane Collar (continued) P151M-020S 2X P151M-030S 3X P151M-040S 4X S119 Expansion Joint Soc x Soc - PVC White with EPDM O-ring S / S S / S S S Large Diameter Expansion Joint Soc x Soc - PVC Gray with EPDM O-ring X X X X Air Admittance Valve Spigot Maximum 6 DFU (Drainage Fixture Units) AAV / Floor Drain with Stainless Steel Adjustable Top w/round Grate & Membrane Collar P150M-015S 1-1/2X P160M-015S 1-1/2X P170M-015S 1-1/2X P180M-015S 1-1/2X P150M-020S 2X P160M-020S 2X P170M-020S 2X P180M-020S 2X P150M-030S 3X P160M-030S 3X P170M-030S 3X P180M-030S 3X P150M-040S 4X P160M-040S 4X P170M-040S 4X P180M-040S 4X Floor Cleanout w/stainless Steel Adjustable Round Top & Solid Access Cover P S 1-1/2X P S 2X P S 3X P S 4X Floor Cleanout w/stainless Steel Adjustable Round Top, Solid Access Cover & Membrane Collar P151M-015S 1-1/2X Made in the U.S.A. NOT FOR DISTRIBUTION OF COMPRESSED AIR OR GAS Page 544 Due to Material Cost Variations, s Subject to Change. Check On-line
11 Sewer onnect Sewer onnect Application Requires Purchase of SDC-040 Body and SDCP-040 Plunger, Sold Separately. Screw-down Plunger installs in Body to provide temporary shut-off of Sewer line or to minimize sewage backup from sewer mains during flooding. Body accepts SDR-35 Sewer Pipe (or any ASTM D 3034 /D 2729 pipe), but can easily adapt to Schedule 40 drainage pipe using 4" IPS socket x Sewer spigot adapters, Spears part no IXS. Standpipe to grade can be easily fabricated from user-supplied SDR-35 Sewer Pipe or optionally from Schedule 40 drainage pipe with the addition of a 4" Schedule 40 DWV socket Coupling, Spears part no. P For Closure, a 4" Sewer Cap, Spears part no ; or 4" Schedule 40 DWV Cap, Spears part no. P can be used as applicable. A T-handle extension for easy Plunger operation can also be fabricated from user supplied 1" Schedule 40 pipe and a Tee fitting, Spears part no See installation instructions included with product for additional detail. Sewer onnect Body Sewer Socket X Sewer Socket. Requires Separate Purchase of SDCP-040 Plunger Requires Purchase of SDCP-040 Plunger SDC Sewer onnect Plunger For Use With Sewer onnect Body. Requires Separate Purchase of SDC-040 Body Requires Purchase of SDC-040 Body SDCP Page 545 NOT FOR DISTRIBUTION OF COMPRESSED AIR OR GAS Spears Manufacturing Company Due to Material Cost Variations, s Subject to Change. Check On-line
12 Industrial PVC Backwater Valves Backwater Valves are designed to prevent backflow in numerous applications where easy service access for maintenance and cleaning is needed. Excellent for use in sanitary or storm sewer drainage systems to prevent waste back up due to inadequate drainage, for balancing multi-level ponds, aquaculture features or storage tank systems, and many other applications. Spears Backwater Valve has been engineered for improved function and easier service, especially in buried service with use of optional Service-Access Extension available either preassembled with valve or as an add-on kit. Replaceable internal flapper assembly with EPDM Seat. Service-Access Extension available either preassembled with valve, as an add-on kit, or as valve & extension kit components with user supplied pipe. Direct Connection to ASTM D 2665 PVC DWV or other IPS size pipe. Spears fabricated IPS x Sewer Adapters or DWV x Sewer & Drain Adapter Bushings are available for connection to ASTM D 3034 & ASTM D 2729 Sewer pipe. Pressure Rated to 43 psi (100 feet of 73 F (23 C). All extension kits can be cut shorter for custom application. Conforms to ASME/ANSI A for Backwater Valves. PVC Backwater Valves Soc x Soc - Valve Only PVC Backwater Valves S275P S375P S475P S675P PVC Backwater Valves with Extension Kit to Premade Length PVC Backwater Valves with Extension Kit to Premade Length Soc x Soc - Assembled with Extension (continued) S375P X48HT S475P X12HT S475P X16HT S475P X20HT S475P X24HT S475P X36HT S475P X48HT S675P X12HT S675P X16HT S675P X20HT S675P X24HT S675P X36HT S675P X48HT ¹ - designates nominal valve size x extension height (HT-top of valve to top of extension, inches) PVC Service-Access Extension Kit Only to Premade Length PVC Backwater Valves with Extension Kit to Premade Length Soc x Soc - Assembled with Extension S275P X12HT S275P X16HT S275P X20HT S275P X24HT S275P X36HT S275P X48HT S375P X12HT S375P X16HT S375P X20HT S375P X24HT S375P X36HT PVC Service-Access Extension Kit: includes factory assembled internal flap assembly, assembly extension pipe, and external extension housing with top access adapter. Requires solvent cement assembly to existing valve and uses existing threaded Access Plug. Standard Extensions are available in convenient increments of 12", 16", 20", 24", 36", and 48" (measured from top of valve to top of extension). Contact Spears for pricing on custom cut lengths. All extension kits can be cut shorter in the field for custom fits prior to cementing access adapter in place. PVC Service-Access Extension Kit Only to Premade Length SAEK X12HT SAEK X16HT SAEK X20HT SAEK X24HT SAEK X36HT SAEK X48HT SAEK X12HT SAEK X16HT Made in the U.S.A. NOT FOR DISTRIBUTION OF COMPRESSED AIR OR GAS Page 546 Due to Material Cost Variations, s Subject to Change. Check On-line
13 Industrial PVC Backwater Valves PVC Service-Access Extension Kit Only to Premade Length (continued) SAEK X20HT SAEK X24HT SAEK X36HT SAEK X48HT SAEK X12HT SAEK X16HT SAEK X20HT SAEK X24HT SAEK X36HT SAEK X48HT SAEK X12HT SAEK X16HT SAEK X20HT SAEK X24HT SAEK X36HT SAEK X48HT ¹ - designates nominal valve size x extension height (HT-top of valve to top of extension, inches) PVC Backwater Valve with Extension Components PVC Backwater Valve Extension Components Only PVC Backwater Valve Extension Components Only Must be assembled with user supplied pipe (see Table 1) S275P-ECK S375P-ECK S475P-ECK S675P-ECK Table 1: User Supplied Pipe Requirements For Use With Extension Components PVC Backwater Valve with Extension Components Soc x Soc - Components Must be assembled with user supplied pipe (see Table 1) S275P-AK S375P-AK S475P-AK S675P-AK Valve 2" 3" Acceptable RISER Pipe Types for User-Supplied Pipe 4" Class 125 PVC PIPE 4" Sch 40 PVC PIPE 5" Class 125 PVC PIPE 5" Sch 40 PVC PIPE 3 6" D3034 (SDR 35) PVC SEWER PIPE 2 Acceptable HANDLE Pipe Use any 3/4" IPS plastic pipe 1 8" Class 125 PVC PIPE 4" 8" Sch 40 PVC PIPE 10" Class 125 PVC PIPE 6" 10" Sch 40 PVC PIPE Note 1: Riser and Handle pipe are not the same length. Sch 40 and/or Sch 80 pipe as well as ABS may be used. Special cement must be used to join PVC to ABS. Note 2: When 6" SDR35 pipe is used, adapter fits pipe inside diameter. Note 3: DO NOT use Sch 80 for 3" Riser pipe. Industrial Backwater Valve Flapper Repair Kit Industrial Backwater Valve Flapper Repair Kit Complete Flapper Assembly replacement S275P-FRK S375P-FRK S475P-FRK S675P-FRK Page 547 NOT FOR DISTRIBUTION OF COMPRESSED AIR OR GAS Spears Manufacturing Company Due to Material Cost Variations, s Subject to Change. Check On-line
14 PVC Backwater Valve Metric Adapters DWV Industrial PVC Backwater Valves PVC Backwater Valve Metric Adapters Metric Socket x ASTM Spigot S275MA mm X S375MA mm X S475MA mm X S675MA mm X Made in the U.S.A. NOT FOR DISTRIBUTION OF COMPRESSED AIR OR GAS Page 548 Due to Material Cost Variations, s Subject to Change. Check On-line
Discount Codes 07 DWV-PVC through 8 22 HVAC DWV - PVC. PVC Drain - Waste Vent Fittings. Includes: DWV - PVC - through 8 HVAC.
Discount Codes 07 DWV-PVC through 8 22 HVAC DWV - PVC PVC Drain - Waste Vent Fittings Includes: DWV - PVC - through 8 HVAC s Effective: March 14, 2011 1 H x FPT H x MPT SP x MPT SP x SJ w/plastic Nut &
More information(718)
1 of 19 PVCDWV 090418 P9599 P9512 P9513 P9555 P9514 P10435 P11483 P9805 P10072 P10831 P10797 P10554 Coupling (H H) (718) 566-1000 Female Adapter (FPT H) Reducing Female Adapter(HxFPT) Product(s) Part Number
More informationDWV-PVC PVC DRAIN, WASTE & VENT FITTINGS PRODUCTS PRICE LIST INCLUDES HVAC PRODUCTS. 07 DWV- PVC through 8 22 HVAC
PRICE GROUP DESCRIPTION DISCOUNT MULTIPLIER 07 DWV- PVC through 8 22 VAC PRODUCTS PRICE LIST DWV-PVC PVC DRAIN, WASTE & VENT FITTINGS INCLUDES VAC PRODUCTS DWV-PVC EFFECTIVE SEPTEMBER 18, 2017 KEY:...ub
More informationABS DWV FITTINGS FOR PLUMBING AND MECHANICAL APPLICATIONS
ABS DWV FITTINGS FOR PLUMBING AND MECANICAL APPLICATIONS Job Name Contractor Job Location Wholesaler Engineer Streamline Rep Product Description: Streamline ABS DWV ittings for use in applications including
More informationSUPERSEDES ABS-C0811/AUG.
ABS-C0612/R JUNE 2012 SUPERSEDES ABS-C0811/AUG. 2011 SANITARY TEE REDUCING TEE TEE - Left Side Inlet 600007 1 1/4" 0 62852 60000 5 50 4,800 15.41 600015 1 1/2" 0 62852 60001 2 90 2,880 8.27 600023 2"
More informationABS-C0717 JULY 2017 SUPERSEDES ABS-C0217 CSA B181.1 ABS DWV FITTINGS.
ABS-C0717 JULY 2017 SUPERSEDES ABS-C0217 CSA B181.1 ABS DWV FITTINGS www.bow-group.com dimension item Ctn Skid list price dimension item Ctn Skid list price SANITARY TEE (Hub x Hub x Hub) 1 1/4" 600007
More information2348 Linden Blvd Brooklyn, NY Tel: (718) Fax: (718) PVC DWV FITTINGS
2348 Linden Blvd Brooklyn, NY 11208 Tel: (718) 566-1000 Fax: (718) 566-1799 Email: sales@alroproducts.com www.alroproducts.com PVC DWV FITTINGS 2348 Linden Blvd Brooklyn, NY 11208 Tel: (718) 566-1000 Fax:
More informationABS-C0219 FEB SUPERSEDES ABS-C0717R CSA B181.1 ABS DWV FITTINGS.
ABS-C0219 FEB. 2019 SUPERSEDES ABS-C0717R CSA B181.1 ABS DWV FITTINGS www.bow-group.com DIMENSION ITEM CTN SKID LIST PRICE DIMENSION ITEM CTN SKID LIST PRICE SANITARY TEE (Hub x Hub x Hub) 1 1/4" 600007
More informationABS-0918 SUPERSEDES ABS-0318 ASTM D2661 R/SEPT ABS DWV FITTINGS.
ABS-0918 SUPERSEDES ABS-0318 ASTM D2661 R/SEPT. 2018 ABS DWV FITTINGS www.bow-group.com COUPLING 1 1/4" 601112 125 9,000 5.63 1 1/2" 601120 125 9,000 3.48 2" 601138 100 4,800 4.65 3" 601146 45 1,440 13.07
More informationABS DWV FITTINGS ABS-1116 NOVEMBER 2016 SUPERCEDES ABS-1215 ASTM D2661
ABS DWV FITTINGS ABS-1116 NOVEMBER 2016 SUPERCEDES ABS-1215 ASTM D2661 COUPLING 1 1/4" 601112 125 9,000 3.36 1 1/2" 601120 125 9,000 2.25 2" 601138 100 4,800 3.03 3" 601146 45 1,440 8.49 4" 601153 25 800
More informationDWV - PVC. PVC Drain, Waste & Vent Fittings. Includes: DWV - PVC - through 8 HVAC. List Prices. Effective: February 15, 2016
Discount Codes 07 DWV-PVC through 8 22 VAC DWV - PVC PVC Drain, Waste & Vent Fittings Includes: DWV - PVC - through 8 VAC s Effective: February 15, 2016 Revised 2/29/2016 x FPT x MPT SP x MPT SP x SJ w/plastic
More informationABOUT NORTH AMERICAN PIPE CORPORATION
Molded PVC Fittings TABLE OF CONTENTS D-SERIES: SOLVENT WELD DWV FITTINGS CERTS: ASTM D2665, F1866, F2135, CSA B181.2, UPC, NSF... 1-5 G-SERIES: GASKETED SDR 35 SEWER FITTINGS CERTS: ASTM D3034, ASTM
More informationEffective Date: January 2017 Void After: January Product: ABS-DWV Pipe and Fittings File No. 1909
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
More informationSECTIO N 15 Phone: (866) Fax: (888)
PVC FITTINGS SCHEDULE 40, 80, INSERT NYLON FITTINGS PVC & CPVC NIPPLES SECTIO N 15 www.cbsupplies.ca Phone: (866) 503-5523 Fax: (888) 562-2095 AGI@cbsupplies.ca PRODUCTS LIST SCHEDULE 40 PVC PRESSURE FITTINGS
More informationPRICE EACH PVC DWV FITTINGS SMALL AND LARGE DIAMETER MOLDED FITTINGS MARCH 1, 2017
LIST U19-0317-IP PVC DWV FITTINGS SMALL AND LARGE DIAMETER MOLDED FITTINGS MARCH 1, 2017 SUPERSEDES U19-1116-IP (NOVEMBER 1, 2016) Our website pricing is the current list price and may vary from our printed
More informationABS DWV FITTINGS MARCH 1, 2017
LIST U10-0317-IP ABS DWV FITTINGS MARCH 1, 2017 SUPERSEDES U10-1116-IP (NOVEMBER 1, 2016) Our website pricing is the current list price and may vary from our printed price list. Please visit our website
More informationSCHEDULE 80 PVC PRESSURE FITTINGS L80P EFFECTIVE JULY 1, 2017 REVISED PRODUCTS PRICE LIST INCLUDES: SCHEDULE 80 PVC 1/4 TO 12
PRICE GROUP DESCRIPTION 02 SCH 80 PVC through 8 92 SCH 80 PVC 10" AND LARGER VB GASKET for FLANGE DISCOUNT MULTIPLIER PRODUCTS SCHEDULE 80 PVC PRESSURE FITTINGS INCLUDES: SCHEDULE 80 PVC 1/4 TO 12 L80P
More informationABS DWV FITTINGS APRIL 1, 2013
LIST C10-11-111 ABS DWV FITTINGS APRIL 1, 2013 SUPERSEDES C10-11-110 (JUNE 1, 2012) Our website pricing is the current list price and may vary from our printed price list. Please visit our website for
More informationSeries G. STI Gasketed Sewer Fittings SDR 35 STI. Injection Molded in Sizes 4 12 Fabricated in Sizes STI Gasketed Sewer SDR 35 G Series
Gasketed Sewer ittings SDR 35 Third party tested and listed by NS, UPC and CSA to meet specifications defined in ASTM D3034, 1336 and CSA B182.2. Gasketed Sewer ittings SDR 35 Gasketed Injection Molded
More informationEverTUFF CPVC CTS Fittings, Valves, Pipe & Cement
CTS CPVC uct EverTUFF CPVC CTS Fittings, Valves, Pipe & Cement EverTUFF CPVC CTS Fittings, Valves, Pipe & Cement PRODUCT Contact Spears for any Information not found. Page 1 Spears Manufacturing Company
More informationPVC WELL CASING & FITTINGS 20 FT. BELL-END /8 SDR21 REDUCING COUPLINGS STEEL WELL CASING & FITTINGS
Pipe Pipe & Well Casing FT. BELL-END 0 7 293 2 2 29 27 23 " SCH0 -/2" SDR7 " SDR2 " SCH0 " SCH0 FT. BELL-END 37 32 30 29 2 " SCH0 -/2" SDR7 -/" DR27. PVC WELL CASING & FITTINGS FT. BELL-END 003 7 -/ SDR2
More informationP Series. Price List Effective February 11, 2008
rice List Effective February 11, 2008 VC Solvent Weld Third party tested and listed by NSF, UC and CSA to meet ITEM IN INCHES SIZE NUMBER ART BOX QTY CRATE QTY RICE LIST Solvent Weld Sewer Fittings ITEM
More informationABS DWV FITTINGS JULY 1, 2011
LIST C10-11-109 JULY 1, 2011 SUPERSEDES C10-11-108 (APRIL 1, 2011) Our website pricing is the current list price and may vary from our printed price list. Please visit our website for up-to-date information.
More informationSDR-26 (160 PSI) SDR-21 (200 PSI) SDR-17 (250 PSI) MINIMUM WALL (IN.) 20 LENGTH. 1.5" 1.900" N/A N/A N/A.090" ".419 lbs..415 lbs.
u ASTM D2241 PRESSURE PIPE Gasketed Pipe Specifications Northern Pipe Products ASTM D2241 IPS Pressure Rated Pipe is manufactured from compounds conforming to cell class 12454 in accordance with ASTM D1784.
More informationEVALUATION SUBJECT: CAST IRON SOIL PIPE AND FITTINGS
ICC-ES Report PMG-1220 Reissued 11/2017 This report is subject to renewal 11/2018 EVALUATION SUBJECT: CAST IRON SOIL PIPE AND FITTINGS DIVISION: 22 00 00 PLUMBING SECTION: 22 13 16 SANITARY WASTE AND VENT
More informationHub & Spigot Pipe & Fittings Price List SV-ABI-2019
Part Size & Approx Pieces List Part Size & Approx List Number Description Wt Per Lift Price Number Description Wt Price Pipe, Single Hub, 3 - ½ Lengths 244059 2 X 3.5 15 102 81.15 244066 3 X 3.5 23 60
More informationHub & Spigot Pipe & Fittings Price List SV-ABI-2018
Part Size & Approx Pieces List Part Size & Approx List Number Description Wt Per Lift Price Number Description Wt Price Pipe, Single Hub, 3 - ½ Lengths 244059 2 X 3.5 15 102 74.25 244066 3 X 3.5 23 60
More informationSincerely, Your Partners at Specified Fittings
N E S Specified Fittings E S 164 W. Smith Rd. Bellingham, WA 98226-9616 Mailing Address PO Box 28157 Bellingham, WA 98228-0157 PVC FITTINGS W PIP: GASKETED SDR81 - SDR32.5 N Mexico 800-429-1705 Toll Free
More informationHeavy Wall Gasketed Sewer Fittings SDR 26 Injection Molded in Sizes 4 12 Fabricated in Sizes 15 36
Heavy Wall Gasketed Sewer Fittings SDR 26 Injection Molded in Sizes 4 12 Fabricated in Sizes 15 36 H With a 34.5% thicker wall than SDR 35 and high impact retention ring. Royal Building Product's PVC Heavy
More informationSchedule 40 Fittings & Accessories Turf Swivel Joints
Turf Swivel Joints Turf Swivel Joints, Compact Turf Swivel Joints and Turf Swivel Joint Kits are designed for open discharge systems and are not to be used with valve-in-head sprinklers or quick coupler
More informationPressure Pipes & Fittings
Pressure Pipes & Fittings Description: UPVC and CPVC pipes for hot and cold water supply under pressure. Range: Metric series fromø16 up toø315 mm, Imperial series fromø1/2" up toø1". Pressure Rating:
More informationLIST PRICE. Tyler Cast Iron Soil Pipe & Fittings
LP-DWV-2081 Effective: January 2, 2008 Replaces: LP-DWV-2071 Dated: January 2, 2007 LIST PRICE Tyler Cast Iron Soil Pipe & Fittings Product... Pages PIPE & FITTINGS No-Hub... 2-6 NH RufWall... 7-9 Product...
More informationLIST PRICE. Tyler Cast Iron Soil Pipe & Fittings
Effective: July 1, 2018 Replaces: LP-DWV-2015 Dated: January 1, 2015 LIST PRICE Tyler Cast Iron Soil Pipe & Fittings Product...Pages PIPE & FITTINGS No-Hub... 2-8 No-Hub RufWall...9-11 Product...Pages
More informationLIST PRICE. Tyler Cast Iron Soil Pipe & Fittings
Effective: January 1, 2019 Replaces: LP-DWV-2018 Dated: July 1, 2018 LIST PRICE Tyler Cast Iron Soil Pipe & Fittings Product...Pages PIPE & FITTINGS No-Hub... 2-8 No-Hub RufWall...9-11 Product...Pages
More informationSchedule 80 - CPVC Pressure Fittings
Discount Codes 03 Schedule 80 CPVC Schedule 80 - CPVC Pressure Fittings List Prices L15-80C Effective: March 26, 2015 Revised 9.22.2016 2 Schedule 80 - CPVC Products Catalog www.lascofittings.com Pricing
More informationPLUMBING WHOLESALE CATALOG
PLUMBING WHOLESALE CATALOG PLUMBING WHOLESALE CATALOG CONTENTS Tube & Pipe Copper Tube............................8-9 Plastic-Coated Copper Tube.................10 Level Wound Copper Tube..................11
More informationNo-Hub Couplings Drainage Drains Cleanout Plugs Cover Plates
Flexible Couplings Transitions all types of DWV plastic, copper, steel, cast iron and clay pipe. 300 series stainless steel clamps Flexibility - Sleeve is manufactured of molded natural and synthetic rubber
More informationINSTALLATION GUIDE. Model #GB2 35/50 GPM Grease Interceptor For Indoor Use. Contents
INSTALLATION GUIDE Model #GB2 35/50 GPM Grease For Indoor Use Contents Special Precautions............................................ 2 Getting to Know the GB2....................................... 3
More informationINSTALLATION GUIDE. Model #GB1 20/25 GPM Grease Interceptor For Indoor Use. Contents
INSTALLATION GUIDE Model #GB1 20/25 GPM Grease For Indoor Use Contents Special Precautions............................................ 2 Getting to Know the GB1........................................
More informationSection One. Steel Underground. PVC Accessories Bolt-on Dresser Fittings Solvent PVC Pipe Fittings Gasketed PVC Pipe Fittings
Page Steel Underground Section One Powder Coated Steel Fittings Galvanized Steel Fittings PVC Fittings Riser Valves Clampon Saddles, Couplers, Male Ends Repair Couplers PVC Accessories Bolton Dresser Fittings
More informationSpears Low-Extractable SCHEDULE 80 PIPE
Spears Low-Extractable SCHEDULE 80 PIPE NOMINAL PIPE MAX. W.P. LGTHS/ PART NUMBER AVG. OD AVG. ID MIN. WALL LBS/FT SIZE PSI* CARTONS 1/2" LXT-005.840.528.147 420.202 22 3/4" LXT-007 1.050.724.154 340.273
More informationGB2 35/50 GPM Grease Interceptor for Indoor Use
INSTALLATION GUIDE GB2 35/50 GPM Grease for Indoor Use Contents Special Precautions.........................................2 Getting to Know the GB2....................................3 On the Floor Installation..................................
More informationAnti Siphon Ballcock RP Anti-Siphon Ballcock
UR PS1115 Effective November 1, 2015 (SUPERCEDES PS0514 ) The issuance of this price list is not an offer to sell the goods listed herein at the prices stated. Anti Siphon Ballcock 109-603RP Anti-Siphon
More informationCPVC HOT & COLD PLUMBING SYSTEM PRICE LIST
CPVC HOT & COLD PLUMBING SYSTEM PRICE LIST With effect from 1st June, 2015 SDR-11 (3 Mtr. Length) (Rate per mtr.) 15 ½ M011110301 100 75.00 20 ¾ M011110302 50 110.00 25 1 M011110303 30 174.00 32 1¼ M011110304
More informationNo-Hub NH-ABI /4 Bend Short Sweep. SILVERSPUN 10 No-Hub Pipe. Extended Short Sweep. 1/4 Bend. 1/4 Bend Long Sweep. 1/4 Bend w/2 Side Opening
Part Pieces Pieces Lift List Inv Number Size Per Lift Weight Weight Price Code SILVERSPUN 10 No-Hub Pipe 00156 1-1/2 X 10 54 30 1620 138.30 A 00158 2 X 10 64 36 2304 138.70 A 00160 3 X 10 48 54 2592 191.40
More informationTurf & Irrigation EverTUFF TURF Swing Joint Riser Assemblies
Made in the U.S.A. NOT FOR DISTRIBUTION OF COMPRESSED AIR OR GAS Page 88 Due to Material Cost Variations, s Subject to Change. Check On-line Catalog @ www.spearsmfg.com Most common configurations of Swing
More informationFilters & Strainers Technical Information TECHNICAL INFORMATION WEIGHTS & DIMENSIONS
Filters & Strainers Technical Information TECHNICAL INFORMATION WEIGHTS & DIMENSIONS Contact Spears for any Information not found. Made in the U.S.A. Suitable for Oil-Free air handling to 25 psi, not for
More informationINNOVATIVE New Generation of Backwater Valves TECHNOLOGY. Fullport Backwater Valve NEW. Access Box Model # PE 2013
WINNER 2005 NEW Access Box Model # PE 2013 Fullport Backwater Valve INNOVATIVE New Generation of Backwater Valves Clear transparent lid provides easy visual inspection Built-in sewer clean-out Model #
More informationPipe Nipples / Solvent Cement / Pipe Clips 11. Diaphragm Valves / Knife Gate Valves 21
TABLE OF CONTENTS Pipe Sizing 1 Pipe 2 Tee s 3 Elbows 4 Couplings 5 Adaptors, Caps & Plugs 6 Unions 7 Reducer Bushing 8 Wye s / Clamp on Saddles 9 Flanges 10 Pipe Nipples / Solvent Cement / Pipe Clips
More informationFlexible Couplings & Saddles
Revised 6/01 Flexible Sewer couplings are the result of many years of experience with sewer pipe connections. Today's couplings are made of specially formulated elastomeric PVC with high tear and shear
More informationSincerely, Your Partners at Specified Fittings
N E S E S Washington Location 14 W. Smith Rd. Bellingham, WA 9822-91 30-398-00 30-398-051 Fax Mailing Address Montana Location 483 Airport Rd. Stevensville, MT 5980-33 40--34 40--181 Fax Mexico PO Box
More informationReliable backwater protection. Protection from backwater. Backwater protection for interior installation
Reliable backwater protection Protection from backwater Backwater Protection - things you need to know Prevention Not properly protecting a building against backwater can result in damage that is extremely
More informationCouplings: Flex, ProSeal & No-Hub Drains Test Caps & Plugs Cleanout Plugs Cover Plates
Flexible Couplings for DWV & Non-Pressure Transitions Transitions all types of DWV plastic, and cast iron. 300 series stainless steel clamps Flexibility - Sleeve is manufactured of molded natural and synthetic
More informationINSTALLATION GUIDE. Model #PP1 Pumpout Port Kit For Use with Grease Interceptors Models GB1, GB2 and GB3. Contents
INSTALLATION GUIDE Model #PP1 Pumpout Port Kit For Use with Grease s Models GB1, GB2 and GB3 Contents Special Precautions............................................ 2 Getting to Know the PP1........................................
More informationCOPPER FITTINGS FOR PLUMBING AND MECHANICAL APPLICATIONS
COPPER FITTINGS FOR PLUMBING AND MECHANICAL APPLICATIONS Job Name Job Location Engineer Contractor Wholesaler Streamline Rep Product Description: Streamline Wrot Copper Pressure and DWV fittings for use
More informationHVAC Products 2016 EDITION NCI CANADA INC.
HVAC Products 2016 EDITION NCI CANADA INC. YOUR SINGLE SOURCE SOLUTION NCI Canada Inc. is a Canadian National master distributor of high quality valves, fittings, pipes and related products serving residential,
More informationLabWaste Standard CPVC & HDPE Neutralization Tanks
LabWaste uct LabWaste Standard CPVC & HDPE Neutralization Tanks LabWaste Standard CPVC & HDPE Neutralization Tanks PRODUCT Contact Spears for any Information not found. Made in the U.S.A. Page 26 LabWaste
More informationYOUR FULL LINE SOURCE FOR PVC ELECTRICAL PRODUCT
CANTEX INC. 301 Commerce Ste 2700 Fort Worth, Texas 76102 817-215-7000 Fax: 817-215-7001 Conduit Fittings & Accessories Directional Drilling Conduit Utility Duct Telephone Duct Residential Boxes YOUR FULL
More informationFitting Guide. Chemtrol Thermoplastic Flow Solutions. Chemtrol is a brand of
Fitting Guide Thermoplastic Flow Solutions is a brand of Contents Introduction 2 Introduction to Fittings 2 Materials 2 Fitting Terms and Abbreviations 3 Dimensions and Standards 3 Product Guide 4 PVC
More informationA u t o matic Backw ater V alve
A u t o matic Backw ater V alve P R O TECT YOUR I N V E S TMENT S INDEX PAGE FLOOD-GATE FEATURES Flood-Gate Features and Applications 2 How Flood-Gate Works 3 Flood-Gate Operation & Approvals 4 Fully mechanical
More informationROUGH PLUMBING. premium industrial products
ROUGH PLUMBING premium industrial products PREMIUM QUALITY PLUMBING PRODUCTS AMRAM AFFILIATE BRANDS For years, Cambridge Resources has been a primary source of premium quality cable management, hose clamps,
More informationINFRASTRUCTURE DESIGN STANDARDS FIGURES SECTION 2 SANITARY SEWER COLLECTION SYSTEMS
INFRASTRUCTURE DESIGN STANDARDS FIGURES SECTION 2 SANITARY SEWER COLLECTION SYSTEMS 2.1 Sanitary Sewer Design Sheet 2.2 Hydraulic Elements Graph for Circular Sewers 2.3 Standard Servicing Locations for
More informationJones Stephens Corp. PlumBest LTConnections SECTION E - COMMERCIAL & RESIDENTIAL PLASTICS. Closet Flanges & Accessories
SCTION - COMMRCIAL & RSIDNTIAL PLASTICS Closet Flanges & Accessories... 180-184 Residential Drains... 185-194 LevelBest Drain & Cleanout System... 195-198 Commercial Drain Bases... 199-200 Commercial Spuds
More information2. Top Inlet 3. Branch (Branches) or Side Openings 4. Length. RH (Right Hand) Fittings Illustrated
HOW TO ORDER Guide To Ordering 1. To avoid errors, specify part numbers. 2. When selecting regular fittings, size of openings appear in this order: 1. Main 2. Branch or branches 3. When selecting reducing/increasing
More informationNSF/ANSI 61 Drinking Water System Components Health Effects
The Public Health and Safety Organization NSF Product and Service Listings These NSF Official Listings are current as of Thursday, January 08, 2015 at 12:15 a.m. Eastern Time. Please contact NSF International
More informationTEXAS UNITED PIPE INC.
TEXAS UNITED PIPE INC. CERTIFICATIONS SPECIFICATIONS & LOADING CHARTS For PVC Pipe Manufactured by Texas United Pipe Inc. P.O. Box 41067 11627 North Houston Rosslyn Houston, Texas 77241 SALES DEPARTMENT
More informationMATERIALS. Polypropylene
68509.verB_1_3.P1.fh 4/17/07 12:15 PM Page 1 THERMOPLASTIC INDUSTRIAL PIPING SYSTEMS Asahi/America thermoplastic piping systems are designed for tough industrial applications. With our partner Agru of
More informationSection 2. Pipe, Valves and Fittings Sizes ¼" to 12" Schedule 80 CPVC Piping System. Serviced by GF Little Rock
Section 2 Schedule 80 CPVC Piping System Pipe, Valves and Fittings Sizes ¼" to 12" Serviced by GF Little Rock Effective March 27, 2006 Glossary Std. Pack = Standard Carton Quantity FP = Female Pipe hread
More informationCNC DISTRIBUTION CNC955
Bath and Shower Components CNC930 C.P. Push Pull Diverter 25 CNC955 C.P. Positive Shut Off 25 CNC997 C.P. Inline Vacuum Breaker 25 CNC3580 Brass Twin Ell 25 CNC3585 Bent Bathcock Couplings 25 CNC3581 Drop
More informationTABLE OF CONTENTS. Pipe Diameter Chart (Reference Only)..50 Extensions 38,40,42,44
TABLE OF CONTENTS Item Page Item Page ANSI/AWWA Compact & Full Body Pipe Fittings: Product Submittals and Installation: Mechanical & Flange Joint C153. 3-9 20U Protective Fusion Bonded Epoxy....5,5 Mechanical
More informationPVC & CPVC Metric Fittings, Unions & Valves
ount (s): 019 Irrigation Manifolds 080 PVC Schedule 80 Molded Fittings Thru 8 190 PN16 PVC Metric Fittings 190 Class 10/12 PVC Metric Fittings 191 Metric PVC Molded 280mm & Larger 192 PN16 CPVC Metric
More informationPVC Gasketed Fittings for PVC IPS Pressure Pipe ENGINEERED FOR DURABILITY
For the most up-to-date version of this price list, EFFECTIVE MARCH 4, 2019 ENGINEERED FOR DURABILITY HARRINGTON CORPORATION P.O. BOX 10335 LYNCHBURG, VIRGINIA 24506-0335 For the most up-to-date version
More informationThe BEST Plumbing Specialties. One Source. L-21 TEST PLUgS
_plumberstools:pcsectionj.qxd 2/6/2012 4:51 PM Page -21 The BEST Plumbing Specialties. One Source. -21 TEST PUgS TEST PUg - SINgE SURE TEST TEST PUg - ONg SURE TEST - Maximum Back Pressure - Water: 30FT.
More informationBall & Socket Fittings (Bauer Style)
Page 96 Ball & Socket Fittings (Bauer Style) Elbow-Bauer Style 3-1/ * *1 MM 76 89 108 133 159 194 2 300 * Locking Bar (part # 9-7318) for & 1 Lever is Sold Separately 6-9038 6-9039 6-9040 6-9041 6-9042
More informationDesign and Construction Standards SECTION PLUMBING PIPING
SECTION 15420 PLUMBING PIPING PART 1 GENERAL 1.1 SCOPE A. Work consists of all plumbing work indicated on drawings and specified herein. Included are requirements for fees/permits for installation and
More informationConduit Fittings & Accessories Directional Drilling Conduit Utility Duct Telephone Duct Residential Boxes
CANTEX INC. 301 Commerce Ste 2700 Fort Worth, Texas 76102 817-215-7000 Fax: 817-215-7001 Conduit Fittings & Accessories Directional Drilling Conduit Utility Duct Telephone Duct Residential Boxes YOUR FULL
More informationSchedule 80 - CPVC Pressure Fittings
Discount Codes 03 Schedule 80 CPVC Schedule 80 - CPVC Pressure Fittings List Prices Effective: August 25, 2012 Revised September 2014 2 Schedule 80 - CPVC Products Catalog www.lascofittings.com Pricing
More informationMacon Plastics, Inc Fax
Macon Plastics, Inc. 888.782.2722 478.743.6828 Fax 478.743.6819 Surface Drainage Products Catalog The Starting Point for your Storm Water Drainage Solutions! Drain Basins, Inline Drains, Curb Inlets, Road
More information(714) Irvine Pipe & Supply, Inc.
CAST IRON SOIL PIPE COUPLING 10 LENGTHS 1-1/2 #NP15 2 #NP20 3 #NP30 4 #NP40 5 #NP50 6 #NP60 8 #NP80 LARGER SIZES AVAILABLE WRENCH 1-1/2 #NCO15 2 #NCO20 3 #NCO30 4 #NCO40 5 #NCO50 6 #NCO60 8 #NCO80 2 x
More informationAdvanced PE Single Wall Piping System
Advanced PE Single Wall Piping System 8 - Specification Black Polyethylene (Advanced PE) Piping System REV:IN0512PE Materials: Pipe Production: ASTM D3350 cell classification PE445584C. Resin shall comply
More informationBuilt-In Testing & Snap-On Overflow Plate Solvent Weld Assembly Coarse Thread: 11.5 = + 900NRI (ROUGH-IN) UP TO 16 FITTINGS - BUILT-IN BODY
Schedule 0 Built-In Testing & Snap-On Overflow Plate Solvent Weld Assembly Coarse Thread:. 00N Complete Bath Wastes Fits most tubs up to deep 00N Series PVC PP = Plastic Pin PP = Brass Pin COMPLETE BATH
More informationDWV. ABS-DWV Pipe and Fittings. PVC-DWV Pipe and Fittings. PVC Sewer Pipe. PVC Schedule 30 DWV Thin Wall 3.25 in. O.D.
DMENONL CLOG B-DW Pipe and Fittings PC-DW Pipe and Fittings PC ewer Pipe PC chedule 30 DW hin Wall 3.25 in. O.D. Pipe and Fittings (Updated November 4, 2014) DW DC-DW 1977-2014 Charlotte Pipe and Foundry
More informationINSTALLATION OF OFF-THE-FLOOR FIXTURES
6 Closet Carriers INSTALLATION OF OFF-THE-FLOOR FIXTURES Many factors, including cost, material, labor required, space, handling and others must be thoroughly evaluated when planning an installation. With
More informationSection 12. Contain-It Secondary Containment Piping System. Serviced by GF Little Rock
Section 12 Contain-It Secondary Containment Piping System Serviced by GF Little Rock Table of Contents Contain-It Pipe 12.4 Fittings 12.5 Terminations 12.7 Centralizers 12.8 Accessories 12.9 Adhesive Requirements
More informationPlugs & Test Equipment for Piping Systems
Plugs & Test Equipment for Piping Systems Catalog CHERNE INDUSTRIES INC. 800.843.7584 www.cherneind.com Publication Date Mar. 2017 Cherne Industries Best in the Business From Humble Beginnings to an Industry
More informationROMAC INDUSTRIES, INC. WIDE RANGE RESTRAINT. RESTRAINED END CAP page 6-7 NOW AVAILABLE FOR HDPE PIPE NO STIFFENER REQUIRED
ROMAC INDUSTRIES, INC. WIDE RANGE RESTRAINT RESTRAINED COUPLING page 4-5 RESTRAINED END CAP page 6-7 RESTRAINED FLANGED COUPLING coming soon JUNE 2014 UPDATE NOW AVAILABLE FOR HDPE PIPE NO STIFFENER REQUIRED
More informationTOTAL MAINTENANCE SOLUTIONS
VOLUME 1, NUMBER 1 TOTAL MAINTENANCE SOLUTIONS Houston, TX Toll Free 800/392-5066 Toll Free FAX 800/342-0559 Orlando, FL Toll Free 800/327-3022 Toll Free FAX 800/327-5689 Greenville, SC Toll Free 800/476-2212
More informationFlameGuard CPVC FIRE SPRINKLER PIPING PRODUCTS. PRICE SCHEDULE FG A Effective October 26, 2009 Supersedes FG
ount (s): 004 Miscellaneous Specialty Valves PVC CPVC 070 CPVC Fire Sprinkler Fittings 071 CPVC Fire Sprinkler Pipe 072 Fire Sprinkler Primer & Cement 073 Applicators & Empty Cans 076 CPVC Fire Sprinkler
More informationSection 2. Shurjoint Grooved Fittings Flow Data / Friction Resistance Ductile Iron Grooved Fittings. Wrought Grooved Fittings
Section 2 Cast & Wrought Grooved Fittings Shurjoint Grooved Fittings... 56 Flow Data / Friction Resistance... 56 Ductile Iron Grooved Fittings 7110 / 7111 / 7112 / 7113 Elbows... 57 7120 / 7135 / 7130
More informationPLUMBING.
CVC-CTS ipe and Fittings... 181 ylon Fittings...181-182 Oatey roducts...184 VC Condensate ipe... 176 VC DWV Fittings...180 VC rimer and Cement...183 VC Schedule 40 ressure Fittings...176-179 Supports...180
More informationMATERIAL SPECIFICATIONS AND BID PROPOSAL SHEET
CATEGORY 1: STEEL COUPLINGS 0 ¾" Steel Couplings (Smith-Blair #411-0501-003) 20 1" Steel Couplings (Smith-Blair #411-013201-003) 20 1¼" Steel Couplings (Smith-Blair #411-016601-003) 20 2" Steel Couplings
More informationCPVC CTS Fittings, Valves & Pipe COPPER-TUBE-SIZE
CPVC CTS Fittings, Valves & Pipe COPPER-TUBE-SIZE Visit our web site: www.spearsmfg.com PRICE SCHEDULE CTS-1-1009 Effective October 26, 2009 Supersedes CTS-1-0308A TEE Socket x Socket x Socket 4101-005
More informationPROJECT CATALOG 01 17
PROJECT CATALOG 01 17 FINISH AND PRICING GROUP CHART Standard Finishes Usually ships in 3-10 days Price Group I Price Group II Polished Chrome 07 Satin Nickel 12 Oil Rubbed Bronze Special Finishes Price
More informationBS up.v.c PRESSURE PIPE FITTINGS
BS Equal Elbow 90 Faucet Elbow 90 Equal Tee Reducing Tee To solvent weld to pipes at both end. L A B Dia. d (Gram) ½ 1 5mm 16.5 17.4 16.5 21.50mm 20 ¾ 2 0mm 19.5 19.6 18.8 26.90mm 45 1 25m m 25.5 21.9
More informationBid # Plumbing Supplies RESULTS
BOARD APPROVED Bid # 15-4 - Plumbing Supplies Page 1 of 16 Grant Plumbing North Brunswick NJ PVC PIPE, SCHEDULE 40 1 1-1/4" PVC Pipe, SCH 40, 20' feet 60 $0.598 $35.88 2 1-1/2" PVC Pipe, SCH 40, 20' feet
More informationPVC 80, 100 & 125 PSI PIP Fabricated Fittings
Discount Code(s): 3 PVC 0 PSI PIP Fabricated Fittings PVC 0 PSI PIP Fabricated Fittings PVC 5 PSI PIP Fabricated Fittings PVC 0, 0 & 5 PSI PIP Fabricated Fittings Visit our web site: www.spearsmfg.com
More informationSWING JOINT & HEAVY TURF
PRICE GROUP DESCRIPTION 11 SWING JOINT 08 HEAVY TURF DISCOUNT MULTIPLIER PRODUCTS SWING JOINT & HEAVY TURF IRRIGATION FITTINGS INCLUDES: PVC SWING JOINTS AND IRRIGATION ACCESSORIES LSJHT EFFECTIVE JULY
More informationPRODUCT SPECIFICATION
PVC piping systems are ideally designed for use in agricultural irrigation including row crop, forage and nursery crop applications and work particularly well in drag, mechanical move and side-shift operations.
More informationintroduction VR Piston Check Valves Product Data Sheet
Product Data Sheet introduction < STANDARDS > ASTM D1784 ASTM D2466 ASTM D2467 ASTM D2464 ASTM F1498 The IPEX VR Piston Check Valve is an ideal solution for process back-flow prevention. These valves feature
More informationMANHOLE INDEX INDEX CONCRETE MANHOLE SPECIFICATIONS ASTM SPECIFICATIONS
MANHOLE INDEX INDEX M1...STANDARD STORM MANHOLE ASSEMBLY A1 M2...STANDARD MANHOLE ASSEMBLY A2 M3...CONICAL MANHOLE ASSEMBLY A3 M4...CONICAL MANHOLE ASSEMBLY A4 M5...CONICAL MANHOLE ASSEMBLY A5 M6...CONICAL
More information