Series G. STI Gasketed Sewer Fittings SDR 35 STI. Injection Molded in Sizes 4 12 Fabricated in Sizes STI Gasketed Sewer SDR 35 G Series
|
|
- Scot Horton
- 6 years ago
- Views:
Transcription
1 Gasketed Sewer ittings SDR 35 Third party tested and listed by NS, UPC and CSA to meet specifications defined in ASTM D3034, 1336 and CSA B Gasketed Sewer ittings SDR 35 Gasketed Injection Molded in Sizes 4 12 abricated in Sizes page 5
2 Phone: Toll ree: TM ax: Web: PlasticTrends.com Prices Effective December 13, 2010 Gasketed Sewer ittings SDR 35 Injection ITEM Molded in Sizes INCHES 4 12 NUMBER QTY QTY PRICE abricated in Sizes features a one-piece integral bell and an extended pre-alignment entrance that aids in proper alignment of pipe and fittings. In addition to scientifically formulated resins, square pipe stops resist pipe push-through while extra heavy support is provided under the pipe stop at branch intersections for added strength. Where available, reducing branches on injection molded 8, 10, and 12 tees, wyes, and tee-wyes shall be minimum DR18 wall thickness in the reducing branch body and reducing branch hub below the gasket race. Applications Gasketed Sewer fittings are intended for non-pressure drainage of sewage and surface water. Certification Gasketed Sewer fittings are third party tested and listed by NS, UPC and CSA to meet specifications defined in ASTM D 3034, ASTM 1336 and CSA B182.2, where applicable. Product Spotlights Controlled Settlement Joint The controlled settlement joint (CSJ) inhibits penetration of the riser through the lateral connection and into the waterway. The new double gasketed CSJ is a slip joint that permits a maximum of 5-1/2 of axial movement of the riser with forces exceeding 500 lb/feet. Riser movement typically occurs from settlement forces or concentrated loads resulting from elevation changes in service connections. The controlled settlement joint in conjunction with proper backfill techniques, offers a solution that inhibits damage such as splitting or cracking. As a result, this minimizes costly excavation and replacement of damaged system components. Plastic Trends Controlled Settlement Joint has certification listing through CSA. It is available in diameters of 4, 5, or 6 and in SDR 26, SDR 28, or SDR 35. Refer to page 14 for pricing and available configurations. Vertical Riser Adapter (G984, G986, G988) This simple solution in conjunction with the unique integral flange, inhibits system failure due to pipe spearing beyond the pipe stop. Refer to page 12 for pricing and available configurations. Short Specs Gasketed Sewer ittings SDR 35 (4-12 ) 4 through 12 injection molded gasketed SDR 35 sewer fittings shall be manufactured in accordance with ASTM D 3034, ASTM 1336, and CSA B They shall be injection molded from virgin PVC compound having a cell classification of or in accordance with, and certified by the National Sanitation oundation (NS), to meet ASTM D Gaskets shall be manufactured in accordance with ASTM 477 or ASTM 913. Gaskets shall be firmly seated in fitting in order to ensure proper installation and to prevent dislocation or misalignment during system assembly. Gasket joints must comply with ASTM D 3212 Internal Pressure Test (exfiltration) and Vacuum Test (infiltration) at 5 degrees of gasket joint deflection and top load deflection. Where available, reducing branches on injection molded 8, 10, and 12 tees, wyes, and teewyes shall be minimum DR18 wall thickness in the reducing branch body and reducing branch hub below the gasket race. Gasketed SDR 35 sewer fittings shall be certified by the National Sanitation oundation (NS) and, in applicable configurations, by the International Association Of Plumbing And Municipal Officials (IAPMO) to meet ASTM D 3034, and by the Canadian Standards Association (CSA) to meet CSA B ATTENTION: Plastic Trends fittings are not to be used with compressed air or gases. Plastic Trends does not recommend that piping systems that include its products be tested with compressed air or gases. page 6
3 Gasketed Sewer ittings SDR 35 Third party tested and listed by NS, UPC and CSA to meet specifications defined in ASTM D3034, 1336 and CSA B Gasketed t STRAIGHT TEE GxGxG *4 G *6 x 4 G [54] *6 G106 4 [50] *8 x 4 G [30] *8 x 5 G *8 x 6 G [30] *8 G108 2 [13] *10 x 4 G *10 x 5 G *10 x 6 G *10 x 8 G *10 G *12 x 4 G *12 x 5 G *12 x 6 G *12 x 8 G *12 x 10 G *12 G x 4 L x 6 L x 8 L x 10 L x 12 L L x 4 L , x 6 L , x 8 L , x 10 L , x 12 L , x 15 L , L , x 4 L , x 6 L , x 8 L , x 10 L , x 12 L , x 15 L , x 18 L , L , x 4 L , x 6 L , x 8 L , x 10 L , x 12 L , x 15 L , x 18 L , x 21 L , L , t 45 WYE GxGxG *4 G *6 x 4 G [50] *6 G306 4 [20] *8 x 4 G [32] *8 x 6 G [28] *8 G308 2 [12] *10 x 4 G x 4 L *10 x 6 G x 6 L x 8 L L *12 x 4 G x 4 L *12 x 6 G x 6 L x 8 L x 10 L L x 4 L x 6 L x 8 L x 10 L x 12 L L , x 4 L , x 6 L , x 8 L , x 10 L , x 12 L , x 15 L , L , x 4 L , x 6 L , x 8 L , x 10 L , x 12 L , x 15 L , x 18 L , L , x 4 L , x 6 L , x 8 L , x 10 L , x 12 L , x 15 L , x 18 L , x 21 L , L , page 7
4 Phone: Toll ree: TM ax: Web: PlasticTrends.com Prices Effective December 13, 2010 t STRAIGHT TEE SxGxG * 4 G * 6 x 4 G * 6 G * 8 x 4 G * 8 x 6 G [18] * 8 G t STRAIGHT TEE WITH DWV BRANCH GxGxDWV G *8 x 4 H *8 x 6 H x 4 G x 6 G x 4 G x 6 G t 45 WYE SxGxG * 4 G * 6 x 4 G * 6 G326 4 [20] * 8 x 4 G [32] * 8 x 6 G [28] * 8 G t 45 WYE WITH DWV BRANCH GxGxDWV G *8 x 4 H [14] *8 x 6 H [12] x 4 L x 6 L x 4 L x 6 L t STRAIGHT TEE WITH DWV BRANCH GxGxDWV H *8 x 4 G [16] *8 x 6 H x 4 G x 6 G x 4 G x 6 G t 45 WYE WITH DWV BRANCH GxGxDWV H *8 x 4 G [32] *8 x 6 H [12] x 4 L x 6 L x 4 L x 6 L t COMBO WYE & 1/8 BEND GxGxG t TEE CROSS GxGxGxG 4 G _ x 4 G G x 4 G x 6 G G x 4 L x 6 L x 8 L L x 4 L x 6 L x 8 L x 4 L x 6 L x 8 L x 4 L L x 4 L x 6 L L t DOUBLE 45 WYE GxGxGxG t 2-WAY CLEANOUT GxGxG *6 x 4 G [15] *6 G [15] x 4 L x 6 L L x 4 L x 6 L x 8 L x 4 L x 6 L x 8 L x 4 L x 6 L x 8 L *4 G *6 G [21] page 8
5 Gasketed Sewer ittings SDR 35 Third party tested and listed by NS, UPC and CSA to meet specifications defined in ASTM D3034, 1336 and CSA B Gasketed t SANITARY TEE (T-Y) GxGxG *4 G *6 x 4 G [56] *6 G157 2 [24] *8 x 4 G [30] *8 x 6 G [30] *8 G158 2 [12] t SANITARY TEE WITH DWV BRANCH (T-Y) GxGxDWV G 8 x 4 H x 6 H t SANITARY TEE (T-Y) SxGxG *4 G *6 x 4 G *6 G *8 x 4 G [30] *8 x 6 G [30] *8 G t SANITARY TEE WITH DWV BRANCH (T-Y) GxGxDWV H *8 x 4 H *8 x 6 H t 1/4 BEND (90 ) GxG *4 G *6 G206 4 [48] *8 G208 2 [14] *10 G *12 G t 1/4 BEND (90 ) SxG *4 G *6 G226 4 [50] *8 G228 2 [14] *10 G *12 G t 1/4 BEND (90 ) GxG LONG TURN *4 G *6 G257 4 [24] *8 G258 2 [12] G G L L , L , L , t DEEP SOCKET 1/4 BEND (90 ) GxG 2 PIECE ASSEMBLY 4 H H t 1/4 BEND (90 ) SxG LONG TURN *4 G *6 G277 4 [24] *8 G278 2 [12] G G L L , L , L , t DEEP SOCKET 1/4 BEND (90 ) GxS 2 PIECE ASSEMBLY 4 H H page 9
6 Phone: Toll ree: TM ax: Web: PlasticTrends.com Prices Effective December 13, 2010 t 1/8 BEND (45 ) GxG t DEEP SOCKET 1/8 BEND (45 ) GxG *4 G504 [8] *6 G506 6 [50] *8 G508 4 [32] *10 G *12 G L L , L , L , t 1/8 BEND (45 ) SxG t DEEP SOCKET 1/8 BEND (45 ) GxS *4 G404 [12] *6 G406 6 [60] *8 G408 4 [16] *10 G *12 G L L L , L , H *6 H H *6 H t 1/16 BEND (22 1/2 ) GxG *4 G *6 G [60] *8 G [38] *10 G *12 G L L , L , L , t DEEP SOCKET 1/16 BEND (22 1/2 ) GxG 4 H *6 H t 1/16 BEND (22 1/2 ) SxG *4 G *6 G [60] *8 G [38] *10 G *12 G L L L , L , t DEEP SOCKET 1/16 BEND (22 1/2 ) GxS 4 H *6 H t 1/32 BEND (11 1/4 ) GxG 4 L L L L L t 1/32 BEND (11 1/4 ) SxG 4 L L L L L page 10
7 Gasketed Sewer ittings SDR 35 Third party tested and listed by NS, UPC and CSA to meet specifications defined in ASTM D3034, 1336 and CSA B Gasketed t CAP t STOP COUPLING *4 G *6 G [140] *8 G1608 [8] *10 G [36] *12 G [27] L L L , L , *4 G *6 G606 4 [60] *8 G608 4 [38] *10 G [24] *12 G L L L , L , t CONCENTRIC INCREASER COUPLING GxG *6 x 4 G *8 x 4 G *8 x 6 G *10 x 4 G *10 x 6 G [36] *10 x 8 G [36] *12 x 4 G [27] *12 x 6 G [27] *12 x 8 G [27] *12 x 10 G [18] x 4 L x 6 L x 8 L x 10 L x 12 L x 4 L x 6 L x 8 L x 10 L x 12 L x 15 L x 4 L x 6 L x 8 L x 10 L x 4 L , x 6 L , x 8 L , x 10 L , t SPIGOT PLUG t REPAIR COUPLING *4 G *6 G1166 [15] *8 G *10 G *12 G L L L L , *4 G *6 G626 4 [60] *8 G628 4 [38] *10 G [24] *12 G [16] L L L , L , t CONCENTRIC INCREASER BUSHING SxG *6 x 4 G *8 x 4 G *8 x 6 G *10 x 4 G [36] *10 x 6 G [36] *10 x 8 G [36] *12 x 4 G [18] *12 x 6 G [18] *12 x 8 G [18] *12 x 10 G [18] x 4 L x 6 L x 8 L x 10 L x 12 L x 4 L x 6 L x 8 L x 10 L x 12 L x 15 L x 4 L x 6 L x 8 L x 10 L x 4 L , x 6 L , x 8 L , x 10 L , page 11
8 Phone: Toll ree: TM ax: Web: PlasticTrends.com Prices Effective December 13, 2010 t ECCENTRIC INCREASER COUPLING GxG *6 x 4 G x 4 L *8 x 6 G x 4 L x 6 L x 8 L x 4 L x 6 L x 8 L x 10 L t GASKETED SEWER ADAPTER SOLVENT SEWER HUB x GASKET SEWER HUB *4 G *6 x 4 G *6 G *8 G t GASKETED DWV ADAPTER COUPLING GASKET SEWER HUB x GASKET DWV HUB *4 H *6 x 4 H *6 H L L L t ECCENTRIC INCREASER BUSHING SxG *6 x 4 G *8 x 4 G *8 x 6 G x 4 L x 6 L x 8 L x 4 L x 6 L x 8 L x 10 L x 4 L x 6 L x 8 L x 10 L x 12 L x 4 L , x 6 L , x 8 L x 10 L x 12 L x 15 L t SOLVENT WELD SEWER ADAPTER CHAMER SEWER SPIGOT x SOLVENT SEWER HUB *4 G t GASKETED SEWER ADAPTER SOLVENT SEWER SPIGOT x GASKET SEWER HUB *4 G *6 G *8 G t VERTICAL RISER ADAPTER SxS *4 G *6 G *8 G t SOLVENT DWV ADAPTER BUSHING CHAMER SEWER SPIGOT x SOLVENT DWV HUB *4 G *6 x 4 G *6 G *8 G t DWV ADAPTER SLEEVE DWV SPIGOT x GASKET SEWER HUB *4 G *6 G L L L t SOLVENT TO DWV ADAPTER COUPLING SOLVENT SEWER HUB x GASKET DWV HUB *4 H *6 x 4 H *6 H t GASKETED DWV ADAPTER BUSHING CHAMER SEWER SPIGOT x GASKET DWV HUB *4 H *6 x 4 H *6 H L L L page 12
9 Gasketed Sewer ittings SDR 35 Third party tested and listed by NS, UPC and CSA to meet specifications defined in ASTM D3034, 1336 and CSA B Gasketed t SADDLE TEE WITH STAINLESS STEEL CLAMPS SHORT SKIRT GASKET SKIRT x GASKET INLET t SADDLE TEE WITH STAINLESS STEEL CLAMPS EXTENDED SKIRT GASKET SKIRT x GASKET INLET t SKIRT GASKET OR SADDLE TEE *6 x 4 G *8 x 4 G *8 x 6 G *10 x 4 G *10 x 6 G *12 x 4 G *12 x 6 G *15 x 4 G *15 x 6 G *18 x 4 G *18 x 6 G x 4 L x 4 L x 6 L x 4 L x 6 L x 8 L x 4 L x 6 L x 8 L x 10 L x 4 L x 6 L x 8 L x 10 L x 12 L x 4 L x 6 L x 8 L x 10 L x 12 L x 4 L x 6 L x 8 L x 10 L x 12 L x 4 L x 6 L x 8 L x 10 L x 12 L INLET G INLET G t SADDLE WYE WITH STAINLESS STEEL CLAMPS SHORT SKIRT GASKET SKIRT x GASKET INLET t SADDLE WYE WITH STAINLESS STEEL CLAMPS EXTENDED SKIRT GASKET SKIRT x GASKET INLET t SKIRT GASKET OR SADDLE WYE *6 x 4 G *8 x 4 G *8 x 6 G *10 x 4 G *10 x 6 G *12 x 4 G *12 x 6 G *15 x 4 G *15 x 6 G *18 x 4 G *18 x 6 G x 4 L x 4 L x 6 L x 4 L x 6 L x 8 L x 4 L x 6 L x 8 L x 10 L x 4 L x 6 L x 8 L x 10 L x 12 L x 4 L x 6 L x 8 L x 10 L x 12 L x 4 L x 6 L x 8 L x 10 L x 12 L x 4 L x 6 L x 8 L x 10 L x 12 L INLET G INLET G page 13
10 Phone: Toll ree: TM ax: Web: PlasticTrends.com Prices Effective December 13, 2010 t STAINLESS STEEL CLAMP (QUICKLOCK) 6 P P NOTE: CLAMP LENGTH IS 20.5 INCHES INCHES ON P5128 AND P5188 RESPECTIVELY t MANHOLE ADAPTER WITH PIPE STOP GxS SAND INISH Apply proper Series pricing 4 L L L L L L L t TEMPORARY PLUG POLYETHYLENE *4 G *6 G t MANHOLE ADAPTER WITHOUT PIPE STOP GxS SAND INISH 4 L L L L L L L t CONTROLLED SETTLEMENT JOINT GxG 4 H H t CONTROLLED SETTLEMENT JOINT SxG 4 H H t IN LINE BACKWATER VALVE PVC GASKETED GxG 4 L L L , L , L , t TERMINAL BACKWATER VALVE PVC GASKETED G 4 L L L L L t GASKETED C900 ADAPTER BUSHING CHAMER SEWER SPIGOT x GASKET C900 HUB 4 L L L t GASKETED C900 ADAPTER COUPLING GASKET SEWER HUB x GASKET C900 HUB 4 L L L L L L , L , page 14
11 Gasketed Sewer ittings SDR 35 Third party tested and listed by NS, UPC and CSA to meet specifications defined in ASTM D3034, 1336 and CSA B Gasketed t INTELLICAP WITH 3M MARKER t LOCATOR OR 3M MARKER *4 P *6 P Apply proper Series pricing - P Call for Price t INTELLIDISC WITH 3M MARKER *4 P *6 P Apply proper Series pricing t STRAIGHT TEE VERTICAL RISER KIT t 45 WYE VERTICAL RISER KIT 8 x 6 HDB x 4 HDB Complete job-site ready Vertical Riser Kits include every fitting needed from main to lateral connection all conveniently packaged and ready for installation. Kit Includes Description Qty. Reducing Tee 1 45 Bend SxG 2 Deep Socket 45 Bend GxG 1 Controlled Settlement Joint GxG 1 Vertical Riser Adapter SxS 1 8 x 6 HDB x 4 HDB Complete job-site ready Vertical Riser Kits include every fitting needed from main to lateral connection all conveniently packaged and ready for installation. Kit Includes Description Qty. Reducing Wye 1 45 Bend SxG 3 Deep Socket 45 Bend GxG 1 Controlled Settlement Joint GxG 1 Vertical Riser Adapter SxS 1 t SANITARY TEE (T-Y) VERTICAL RISER KIT 8 x 6 HDB x 4 HDB Complete job-site ready Vertical Riser Kits include every fitting needed from main to lateral connection all conveniently packaged and ready for installation. Kit Includes Description Qty. Reducing Sanitary Tee 1 45 Bend SxG 2 Deep Socket 45 Bend GxG 1 Controlled Settlement Joint GxG 1 Vertical Riser Adapter SxS 1 page 15
ABOUT NORTH AMERICAN PIPE CORPORATION
Molded PVC Fittings TABLE OF CONTENTS D-SERIES: SOLVENT WELD DWV FITTINGS CERTS: ASTM D2665, F1866, F2135, CSA B181.2, UPC, NSF... 1-5 G-SERIES: GASKETED SDR 35 SEWER FITTINGS CERTS: ASTM D3034, ASTM
More informationHeavy Wall Gasketed Sewer Fittings SDR 26 Injection Molded in Sizes 4 12 Fabricated in Sizes 15 36
Heavy Wall Gasketed Sewer Fittings SDR 26 Injection Molded in Sizes 4 12 Fabricated in Sizes 15 36 H With a 34.5% thicker wall than SDR 35 and high impact retention ring. Royal Building Product's PVC Heavy
More informationP Series. Price List Effective February 11, 2008
rice List Effective February 11, 2008 VC Solvent Weld Third party tested and listed by NSF, UC and CSA to meet ITEM IN INCHES SIZE NUMBER ART BOX QTY CRATE QTY RICE LIST Solvent Weld Sewer Fittings ITEM
More informationDWV PVC DWV Drain Waste Vent Fittings
STANDARDS & SPECIFICATIONS Standards provide greater assurance of product performance and consistency, and are available to assist design engineers in system specification. The most frequently referenced
More informationABS DWV FITTINGS FOR PLUMBING AND MECHANICAL APPLICATIONS
ABS DWV FITTINGS FOR PLUMBING AND MECANICAL APPLICATIONS Job Name Contractor Job Location Wholesaler Engineer Streamline Rep Product Description: Streamline ABS DWV ittings for use in applications including
More informationSDR-26 (160 PSI) SDR-21 (200 PSI) SDR-17 (250 PSI) MINIMUM WALL (IN.) 20 LENGTH. 1.5" 1.900" N/A N/A N/A.090" ".419 lbs..415 lbs.
u ASTM D2241 PRESSURE PIPE Gasketed Pipe Specifications Northern Pipe Products ASTM D2241 IPS Pressure Rated Pipe is manufactured from compounds conforming to cell class 12454 in accordance with ASTM D1784.
More informationSincerely, Your Partners at Specified Fittings
N E S Specified Fittings E S 164 W. Smith Rd. Bellingham, WA 98226-9616 Mailing Address PO Box 28157 Bellingham, WA 98228-0157 PVC FITTINGS W PIP: GASKETED SDR81 - SDR32.5 N Mexico 800-429-1705 Toll Free
More informationFlexible Couplings & Saddles
Revised 6/01 Flexible Sewer couplings are the result of many years of experience with sewer pipe connections. Today's couplings are made of specially formulated elastomeric PVC with high tear and shear
More informationHARCO SDR-35 PVC GASKETED SEWER FITTINGS DESIGN DATA
HRO SDR-35 PV GSKETED SEWER FITTINGS DESIGN DT pplicable Standards Fittings: STM D-3034, F-1336 Materials: STM D-1784 Joints: STM D-3212 Gaskets: STM F-477 Wall Thickness: SDR-35 Installation: STM D-2321
More informationINFRASTRUCTURE DESIGN STANDARDS FIGURES SECTION 2 SANITARY SEWER COLLECTION SYSTEMS
INFRASTRUCTURE DESIGN STANDARDS FIGURES SECTION 2 SANITARY SEWER COLLECTION SYSTEMS 2.1 Sanitary Sewer Design Sheet 2.2 Hydraulic Elements Graph for Circular Sewers 2.3 Standard Servicing Locations for
More informationSincerely, Your Partners at Specified Fittings
N E S E S Washington Location 14 W. Smith Rd. Bellingham, WA 9822-91 30-398-00 30-398-051 Fax Mailing Address Montana Location 483 Airport Rd. Stevensville, MT 5980-33 40--34 40--181 Fax Mexico PO Box
More informationHARCO SDR-35 PVC GASKETED SEWER FITTINGS DESIGN DATA
HRO SDR-35 PV GSKETED SEWER FITTINGS DESIGN DT pplicable Standards: Fittings: STM D-3034, F-1336 Materials: STM D-1784 Joints: STM D-3212 Gaskets: STM F-477 Wall Thickness: SDR-35 Installation: STM D-2321
More informationABS-C0717 JULY 2017 SUPERSEDES ABS-C0217 CSA B181.1 ABS DWV FITTINGS.
ABS-C0717 JULY 2017 SUPERSEDES ABS-C0217 CSA B181.1 ABS DWV FITTINGS www.bow-group.com dimension item Ctn Skid list price dimension item Ctn Skid list price SANITARY TEE (Hub x Hub x Hub) 1 1/4" 600007
More informationPRICE EACH PVC DWV FITTINGS SMALL AND LARGE DIAMETER MOLDED FITTINGS MARCH 1, 2017
LIST U19-0317-IP PVC DWV FITTINGS SMALL AND LARGE DIAMETER MOLDED FITTINGS MARCH 1, 2017 SUPERSEDES U19-1116-IP (NOVEMBER 1, 2016) Our website pricing is the current list price and may vary from our printed
More informationTEXAS UNITED PIPE INC.
TEXAS UNITED PIPE INC. CERTIFICATIONS SPECIFICATIONS & LOADING CHARTS For PVC Pipe Manufactured by Texas United Pipe Inc. P.O. Box 41067 11627 North Houston Rosslyn Houston, Texas 77241 SALES DEPARTMENT
More informationNo-Hub Couplings Drainage Drains Cleanout Plugs Cover Plates
Flexible Couplings Transitions all types of DWV plastic, copper, steel, cast iron and clay pipe. 300 series stainless steel clamps Flexibility - Sleeve is manufactured of molded natural and synthetic rubber
More informationSUPERSEDES ABS-C0811/AUG.
ABS-C0612/R JUNE 2012 SUPERSEDES ABS-C0811/AUG. 2011 SANITARY TEE REDUCING TEE TEE - Left Side Inlet 600007 1 1/4" 0 62852 60000 5 50 4,800 15.41 600015 1 1/2" 0 62852 60001 2 90 2,880 8.27 600023 2"
More informationPVC WELL CASING & FITTINGS 20 FT. BELL-END /8 SDR21 REDUCING COUPLINGS STEEL WELL CASING & FITTINGS
Pipe Pipe & Well Casing FT. BELL-END 0 7 293 2 2 29 27 23 " SCH0 -/2" SDR7 " SDR2 " SCH0 " SCH0 FT. BELL-END 37 32 30 29 2 " SCH0 -/2" SDR7 -/" DR27. PVC WELL CASING & FITTINGS FT. BELL-END 003 7 -/ SDR2
More informationSECTIO N 15 Phone: (866) Fax: (888)
PVC FITTINGS SCHEDULE 40, 80, INSERT NYLON FITTINGS PVC & CPVC NIPPLES SECTIO N 15 www.cbsupplies.ca Phone: (866) 503-5523 Fax: (888) 562-2095 AGI@cbsupplies.ca PRODUCTS LIST SCHEDULE 40 PVC PRESSURE FITTINGS
More informationABS DWV FITTINGS MARCH 1, 2017
LIST U10-0317-IP ABS DWV FITTINGS MARCH 1, 2017 SUPERSEDES U10-1116-IP (NOVEMBER 1, 2016) Our website pricing is the current list price and may vary from our printed price list. Please visit our website
More informationEffective Date: January 2017 Void After: January Product: ABS-DWV Pipe and Fittings File No. 1909
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
More informationABS-C0219 FEB SUPERSEDES ABS-C0717R CSA B181.1 ABS DWV FITTINGS.
ABS-C0219 FEB. 2019 SUPERSEDES ABS-C0717R CSA B181.1 ABS DWV FITTINGS www.bow-group.com DIMENSION ITEM CTN SKID LIST PRICE DIMENSION ITEM CTN SKID LIST PRICE SANITARY TEE (Hub x Hub x Hub) 1 1/4" 600007
More informationINNOVATIVE New Generation of Backwater Valves TECHNOLOGY. Fullport Backwater Valve NEW. Access Box Model # PE 2013
WINNER 2005 NEW Access Box Model # PE 2013 Fullport Backwater Valve INNOVATIVE New Generation of Backwater Valves Clear transparent lid provides easy visual inspection Built-in sewer clean-out Model #
More informationGB-35. Submittal Specifications Installation Application Specific Details. PART #: XX DWG BY: C. O'Boyle DATE: 10/08/2015 REV: 0 / /201_ ECO:
GREASE INTERCEPTOR TECHNICAL DATA Submittal Specifications Installation Application Specific Details 33" (83.8 cm) 10" (25.4 cm) (63.5 cm) 15" (38.1 cm) (63.5 cm) SUBMITTAL STANDARD: 3" plain end inlet/outlet
More informationEVERCONNECT TM. Table of Contents. No-Hub Pipe. Flexible. 7 Couplings. Pipe Caps. Heavy Weight. Test Plugs. Couplings. Shielded Transition
Table of Contents No-Hub Pipe Couplings Heavy Weight Couplings Shielded Transition Couplings 3 4 4 Flexible Pipe Caps Test Plugs Drain/Trap & Tubular Connectors 7 7 8 EVERCONNECT TM Flexible & Reducing
More informationGB-250. Submittal Specifications Installation Application Specific Details
GREASE INTERCEPTOR TECHNICAL DATA Submittal Specifications Installation Application Specific Details 68" (1,727 mm) 13½" (343 mm) 51½" (1,308 mm) 38" (965 mm) SUBMITTAL 33½" (851 mm) STANDARD: 4" plain
More informationABS-0918 SUPERSEDES ABS-0318 ASTM D2661 R/SEPT ABS DWV FITTINGS.
ABS-0918 SUPERSEDES ABS-0318 ASTM D2661 R/SEPT. 2018 ABS DWV FITTINGS www.bow-group.com COUPLING 1 1/4" 601112 125 9,000 5.63 1 1/2" 601120 125 9,000 3.48 2" 601138 100 4,800 4.65 3" 601146 45 1,440 13.07
More informationABS DWV FITTINGS ABS-1116 NOVEMBER 2016 SUPERCEDES ABS-1215 ASTM D2661
ABS DWV FITTINGS ABS-1116 NOVEMBER 2016 SUPERCEDES ABS-1215 ASTM D2661 COUPLING 1 1/4" 601112 125 9,000 3.36 1 1/2" 601120 125 9,000 2.25 2" 601138 100 4,800 3.03 3" 601146 45 1,440 8.49 4" 601153 25 800
More informationSmall Diameter N-12 Pipe and Fittings
Small Diameter N-12 Pipe and Fittings THE IN WATER MANAGEMENT TheMOST MostADVANCED AdvancedNAME Name in Drainage SystemsSOLUTIONS SMALL DIAMETER N-12 PIPE AND FITTINGS ADS offers a line of 4-12 (100-300
More informationABS DWV FITTINGS APRIL 1, 2013
LIST C10-11-111 ABS DWV FITTINGS APRIL 1, 2013 SUPERSEDES C10-11-110 (JUNE 1, 2012) Our website pricing is the current list price and may vary from our printed price list. Please visit our website for
More informationYOUR FULL LINE SOURCE FOR PVC ELECTRICAL PRODUCT
CANTEX INC. 301 Commerce Ste 2700 Fort Worth, Texas 76102 817-215-7000 Fax: 817-215-7001 Conduit Fittings & Accessories Directional Drilling Conduit Utility Duct Telephone Duct Residential Boxes YOUR FULL
More informationDrain Waste & Vent (DWV) Systems SCJ PIPE & FITTINGS FOR NON-PRESSURE SEWERAGE APPLICATIONS
Drain Waste & Vent (DWV) Systems SCJ PIPE & FITTINGS FOR NON-PRESSURE SEWERAGE APPLICATIONS contents Drain Waste & Vent (DWV) Systems SCJ PIPE & FITTINGS FOR NON-PRESSURE SEWERAGE APPLICATIONS product
More informationConduit Fittings & Accessories Directional Drilling Conduit Utility Duct Telephone Duct Residential Boxes
CANTEX INC. 301 Commerce Ste 2700 Fort Worth, Texas 76102 817-215-7000 Fax: 817-215-7001 Conduit Fittings & Accessories Directional Drilling Conduit Utility Duct Telephone Duct Residential Boxes YOUR FULL
More informationHP Sanitary Sewer Pipe 12 60
SaniTite HP Sanitary Sewer Pipe 12 60 The Most Advanced Name in Water Management Solutions TM Sanitite HP pipe 12 60 FOR SANITARY SEWER Meets ASTM F2764* SaniTite HP (High Performance) couples advanced
More informationABS DWV FITTINGS JULY 1, 2011
LIST C10-11-109 JULY 1, 2011 SUPERSEDES C10-11-108 (APRIL 1, 2011) Our website pricing is the current list price and may vary from our printed price list. Please visit our website for up-to-date information.
More informationPrecision is Central.
Precision is Central. As experts in pipe joining solutions, we know precision is vital to every fitting and how they are fused. We offer the most complete range of conventional fusion fittings, injection
More informationDiscount Codes 07 DWV-PVC through 8 22 HVAC DWV - PVC. PVC Drain - Waste Vent Fittings. Includes: DWV - PVC - through 8 HVAC.
Discount Codes 07 DWV-PVC through 8 22 HVAC DWV - PVC PVC Drain - Waste Vent Fittings Includes: DWV - PVC - through 8 HVAC s Effective: March 14, 2011 1 H x FPT H x MPT SP x MPT SP x SJ w/plastic Nut &
More informationCATALOGUE SEWAGE MANHOLES
CATALOGUE SC SEWAGE MANHOLES Table of contents TABLE OF CONTENTS Introduction 4 Inspection chamber, type 315 7 Inspection chamber, type 400 10 Inspection chamber, type 425 14 Assembly instruction 19 Catch
More informationDWV-PVC PVC DRAIN, WASTE & VENT FITTINGS PRODUCTS PRICE LIST INCLUDES HVAC PRODUCTS. 07 DWV- PVC through 8 22 HVAC
PRICE GROUP DESCRIPTION DISCOUNT MULTIPLIER 07 DWV- PVC through 8 22 VAC PRODUCTS PRICE LIST DWV-PVC PVC DRAIN, WASTE & VENT FITTINGS INCLUDES VAC PRODUCTS DWV-PVC EFFECTIVE SEPTEMBER 18, 2017 KEY:...ub
More informationINSTALLATION GUIDE. Model #GB2 35/50 GPM Grease Interceptor For Indoor Use. Contents
INSTALLATION GUIDE Model #GB2 35/50 GPM Grease For Indoor Use Contents Special Precautions............................................ 2 Getting to Know the GB2....................................... 3
More informationHigh-Strength Steel Reinforced HDPE Pipe. For pipe specifications, please visit:
Kanaflex Steel Reinforced Pipe (SRPE) Kanapipe for Storm and Sanitary Sewer Applications-12"-72" Kanaflex Steel Reinforced Pipe (SRPE) is the sound solution for storm drainage, combined sewer overflow,
More informationAir Handling Piping Systems
Air Handling Piping Systems ProVent - Compressed Air System - PP Vent Duct System www.asahi-america.com Table of Contents Table of Contents Product Specification... Page 350 SOCKET PIPE AND FITTINGS Pipe,
More informationMATERIAL SPECIFICATIONS AND BID PROPOSAL SHEET
CATEGORY 1: STEEL COUPLINGS 0 ¾" Steel Couplings (Smith-Blair #411-0501-003) 20 1" Steel Couplings (Smith-Blair #411-013201-003) 20 1¼" Steel Couplings (Smith-Blair #411-016601-003) 20 2" Steel Couplings
More informationCompression Fittings & Valves. Make the connection
Compression Fittings & Valves Make the connection Make the Connection with Compression Fittings, Valves, and Municipal Stops Make the connection with Philmac fittings. The versatile Philmac fitting system
More informationPVC Gasketed Fittings for PVC IPS Pressure Pipe ENGINEERED FOR DURABILITY
For the most up-to-date version of this price list, EFFECTIVE MARCH 4, 2019 ENGINEERED FOR DURABILITY HARRINGTON CORPORATION P.O. BOX 10335 LYNCHBURG, VIRGINIA 24506-0335 For the most up-to-date version
More informationCentral Vacuum Valves, Fittings & Accessories. Product Catalog.
Product Catalog 2 With our extensive offering of central vacuum products, Vaculine has established itself as a product innovator in the central vacuum industry. As Vaculine continues to evolve and adapt
More informationPVC Pressure Piping Systems for Water Transmission
PVC Pressure Piping Systems for Water Transmission MUNICIPAL SYSTEMS PVC PRESSURE PIPING SYSTEM MANUFACTURED TO AWWA & CSA STANDARDS IPEX Centurion 14" 60" (350mm 1,500mm), AWWA C905 and CSA Standards
More informationAcid Drainline Piping System
Acid Drainline Piping System Chem Flowtronics 2 Corrosion Resistance Borosilicate glass is used as the material of choice in the chemical laboratory. Borosilicate glass remains today as the only material
More informationCouplings: Flex, ProSeal & No-Hub Drains Test Caps & Plugs Cleanout Plugs Cover Plates
Flexible Couplings for DWV & Non-Pressure Transitions Transitions all types of DWV plastic, and cast iron. 300 series stainless steel clamps Flexibility - Sleeve is manufactured of molded natural and synthetic
More informationHARCO SDR-35 PVC GASKETED SEWER FITTINGS DESIGN DATA
HRO SDR-35 PV GSKETED SEWER FITTINGS DESIGN DT pplicable Standards: Fittings: STM F-1336 Materials: STM D-1784 Joints: STM D-3212 Gaskets: STM F-477 Installation: STM D-2321 45 WYE (G x G x G) E SPEIFITION
More informationWater, Sewer & Drain Fittings
Why Compact? Compact Joint are manufactured from a high strength, impact resistant ductile iron that offers a great margin of safety against service failures and provides vastly increased resistance to
More information2348 Linden Blvd Brooklyn, NY Tel: (718) Fax: (718) PVC DWV FITTINGS
2348 Linden Blvd Brooklyn, NY 11208 Tel: (718) 566-1000 Fax: (718) 566-1799 Email: sales@alroproducts.com www.alroproducts.com PVC DWV FITTINGS 2348 Linden Blvd Brooklyn, NY 11208 Tel: (718) 566-1000 Fax:
More informationDEVELOPMENT ENGINEERING DESIGN BULLETIN
BUILDING AND DEVELOPMENT SERVICES DEPARTMENT 411 Main Street 2 nd Floor BUILDING ENGINEERING P.O. Box 3420 (530) 879-6700 (530) 879-6900 Chico, CA 95927 Fax (530) 895-4726 Fax (530) 895-4899 http://www.ci.chico.ca.us
More informationTABLE OF CONTENTS. Pipe Diameter Chart (Reference Only)..50 Extensions 38,40,42,44
TABLE OF CONTENTS Item Page Item Page ANSI/AWWA Compact & Full Body Pipe Fittings: Product Submittals and Installation: Mechanical & Flange Joint C153. 3-9 20U Protective Fusion Bonded Epoxy....5,5 Mechanical
More informationINSTALLATION GUIDE. Model #GB1 20/25 GPM Grease Interceptor For Indoor Use. Contents
INSTALLATION GUIDE Model #GB1 20/25 GPM Grease For Indoor Use Contents Special Precautions............................................ 2 Getting to Know the GB1........................................
More informationA u t o matic Backw ater V alve
A u t o matic Backw ater V alve P R O TECT YOUR I N V E S TMENT S INDEX PAGE FLOOD-GATE FEATURES Flood-Gate Features and Applications 2 How Flood-Gate Works 3 Flood-Gate Operation & Approvals 4 Fully mechanical
More information5. Underground Requirements
Un d e rg ro u n d Re q u ire me n ts Section 5 2016 Electric Service Requirements, 3rd Edition Section 5 Underground Requirements Directory Page 5.1 General 34 5.2 Conduit Requirements 34 5.3 Trench and
More informationEVALUATION SUBJECT: CAST IRON SOIL PIPE AND FITTINGS
ICC-ES Report PMG-1220 Reissued 11/2017 This report is subject to renewal 11/2018 EVALUATION SUBJECT: CAST IRON SOIL PIPE AND FITTINGS DIVISION: 22 00 00 PLUMBING SECTION: 22 13 16 SANITARY WASTE AND VENT
More informationPlugs & Test Equipment for Piping Systems
Plugs & Test Equipment for Piping Systems Product Catalog CHERNE INDUSTRIES INC. Cherne Industries Best in the Business From Humble Beginnings to an Industry Standard In 1953, Cherne Industries created
More informationSCHEDULE 80 PVC PRESSURE FITTINGS L80P EFFECTIVE JULY 1, 2017 REVISED PRODUCTS PRICE LIST INCLUDES: SCHEDULE 80 PVC 1/4 TO 12
PRICE GROUP DESCRIPTION 02 SCH 80 PVC through 8 92 SCH 80 PVC 10" AND LARGER VB GASKET for FLANGE DISCOUNT MULTIPLIER PRODUCTS SCHEDULE 80 PVC PRESSURE FITTINGS INCLUDES: SCHEDULE 80 PVC 1/4 TO 12 L80P
More informationBid Summary Still Creek Wastewater Improvements Phase III City Job No. 411-D November 21, 2013
Bid Summary Still Creek Wastewater Improvements Phase III City Job No. 411-D4-1102 November 21, 2013 Doughtie Construction Co., Elliott Construction Dudley Construction Ltd. SUBTOTAL GENERAL ITEMS : $191,713.00
More informationBondstrand 2000M/7000M Glassfiber Reinforced Epoxy (GRE) pipe systems for marine service
Quick-Lock Taper/Taper 1-16 inch Bondstrand 2000M/7000M Glassfiber Reinforced Epoxy (GRE) pipe systems for marine service with external pressure requirements 18-40 inch Uses and applications Ballast Portable
More informationSan Antonio Water System Standard Specifications for Construction ITEM NO. 834 FIRE HYDRANTS
San Antonio Water System Standard Specifications for Construction ITEM NO. 834 FIRE HYDRANTS 834.1 DESCRIPTION: This item shall consist of fire hydrant installations using joint restraints in accordance
More informationThe Faction Saddle. we are only as good as our connections GENERAL CAPABILITIES
The Faction Saddle we are only as good as our connections GENERAL CAPABILITIES Agenda August 8, 2017 1. Introductions 2. Technical Presentation 3. Q&A 4. Live Demonstration & Discussion Introductions Contact
More informationPVC 80, 100 & 125 PSI PIP Fabricated Fittings
Discount Code(s): 3 PVC 0 PSI PIP Fabricated Fittings PVC 0 PSI PIP Fabricated Fittings PVC 5 PSI PIP Fabricated Fittings PVC 0, 0 & 5 PSI PIP Fabricated Fittings Visit our web site: www.spearsmfg.com
More informationComparison Between PE 4710 (PE 4710 PLUS) and PE 100 (PE 100+, PE 100 RC)
Comparison Between PE 4710 (PE 4710 PLUS) and PE 100 (PE 100+, PE 100 RC) Author: Dr. Gene Palermo, President, Palermo Plastics Pipe Consulting, www.plasticspipe.com Abstract The scope of this paper is
More informationFACILITY WATER DISTRIBUTION PIPING
SECTION 221113 - FACILITY WATER DISTRIBUTION PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationSUBTOTAL SITE WORK & DEMOLITION (UTILITIES) $180, $348, $319,943.71
BASE BID 1.00 GENERAL CONDITIONS 1.01 Mobilization (Maximum 5% of Base Bid) LS 1 84,000.00 $ 84,000.00 100,000.00 $ 100,000.00 85,000.00 $ 85,000.00 1.02 Bonding, Insurance, Permits (including Plumbing,
More informationMETAL PRESSURE PIPE PIPE & TUBING PIPE & TUBING GALVANIZED PRESSURE PIPE ASTM A-53 ERW BLACK GAS PIPE ASTM A-53 ABOVE GROUND LARSEN SUPPLY CO., INC.
METAL PRESSURE PIPE GALVANIZED PRESSURE PIPE ASTM A-53 ERW 27-0100 B 1/8 700 Max work PSI Schedule 40 21 1 27-0200 B 1/4 700 Max work PSI Schedule 40 21 1 27-0300 B 3/8 700 Max work PSI Schedule 40 21
More informationGAS DISTRIBUTION PRODUCTS METER RISERS
GAS DISTRIBUTION PRODUCTS METER RISERS INDUSTRIES ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and is today a leading manufacturer
More informationupvc PRESSURE AND COMPRESSION FITTINGS
upvc PRESSURE AND COMPRESSION FITTINGS Company Profile Proplastics is the leading supplier of world class plastic pipe systems for water and sewer reticulation in Southern Africa. Established in 1965,
More informationSan Antonio Water System Standard Specifications for Construction ITEM NO. 834 FIRE HYDRANTS
San Antonio Water System Standard Specifications for Construction ITEM NO. 834 FIRE HYDRANTS 834.1 DESCRIPTION: This item shall consist of fire hydrant installations using joint restraints in accordance
More informationTHE GLOBAL LEADER IN PIPE PLUG & TESTING
THE GLOBAL LEADER IN PIPE PLUG & TESTING PNEUMATIC PLUGS MECHANICAL PLUGS GAUGES TOOLS & ACCESSORIES TESTING EQUIPMENT 2 Oatey.com/Cherne TEST WITH THE BEST CHERNE TABLE OF CONTENTS PNEUMATIC PLUGS BLOCKING
More informationType 543. Three-way Ball Valve
Three-way Ball Valve Type 543 General Size: ⅜ 2 Material: PVC, CPVC, PROGEF Standard PP, ABS, SYGEF Standard PVDF Seat: PTFE Seals: EPDM or FPM End Connection: Solvent cement socket, threaded, flanged,
More information(718)
1 of 19 PVCDWV 090418 P9599 P9512 P9513 P9555 P9514 P10435 P11483 P9805 P10072 P10831 P10797 P10554 Coupling (H H) (718) 566-1000 Female Adapter (FPT H) Reducing Female Adapter(HxFPT) Product(s) Part Number
More informationHP 16 Epoxy Fittings (Filament wound with reinforced epoxy inner liner - Compatible with Red Thread and Green Thread HP 16 piping systems)
HP 16 Epoxy Fittings (Filament wound with reinforced epoxy inner liner - Compatible with Red Thread and Green Thread HP 16 piping systems) CHEMICAL INDUSTRIAL Fiber Glass Systems provides a broad range
More informationCasing Spacers & Insulators For Centering Or Custom Positioning Within Casing
Casing Spacers & Insulators For Centering Or Custom Positioning Within Casing APS Casing Spacers & Insulators VS Skids & Straps Easy and efficient to install requiring no grease and no special tools Difficult
More informationWATER & WASTE management 2015 edition
WATER & WASTE management 2015 edition Whether you re looking for a below ground septic or cistern tank or an above ground water tank, you re sure to find it among our wide selection. Our rotational molding
More informationAdvanced PE Single Wall Piping System
Advanced PE Single Wall Piping System 8 - Specification Black Polyethylene (Advanced PE) Piping System REV:IN0512PE Materials: Pipe Production: ASTM D3350 cell classification PE445584C. Resin shall comply
More informationPIPE CONNECTORS & ACCESSORIES
PIPE CONNECTORS & ACCESSORIES FLEXIBLE COUPLINGS Transitions cast iron or plastic to cast iron or plastic pipe. 300 series stainless steel clamps Complies with: ASTM C1173-2002 CSA B602-2005 IAPMO 4933
More informationHub & Spigot Pipe & Fittings Price List SV-ABI-2019
Part Size & Approx Pieces List Part Size & Approx List Number Description Wt Per Lift Price Number Description Wt Price Pipe, Single Hub, 3 - ½ Lengths 244059 2 X 3.5 15 102 81.15 244066 3 X 3.5 23 60
More informationDesign and Construction Standards SECTION PLUMBING PIPING
SECTION 15420 PLUMBING PIPING PART 1 GENERAL 1.1 SCOPE A. Work consists of all plumbing work indicated on drawings and specified herein. Included are requirements for fees/permits for installation and
More informationCOPPER FITTINGS FOR PLUMBING AND MECHANICAL APPLICATIONS
COPPER FITTINGS FOR PLUMBING AND MECHANICAL APPLICATIONS Job Name Job Location Engineer Contractor Wholesaler Streamline Rep Product Description: Streamline Wrot Copper Pressure and DWV fittings for use
More informationHub & Spigot Pipe & Fittings Price List SV-ABI-2018
Part Size & Approx Pieces List Part Size & Approx List Number Description Wt Per Lift Price Number Description Wt Price Pipe, Single Hub, 3 - ½ Lengths 244059 2 X 3.5 15 102 74.25 244066 3 X 3.5 23 60
More informationwater management product catalog
water management product catalog INTRODUCTON Our Thinking Continues to Make Waves. From construction and agriculture to residential and recreation, Hancor offers innovative drainage solutions for a variety
More informationSaniTEE Wastewater Screens Installation & Service Manual FOR USE WITH SNT416, SNT418, SNT818, SNT 838, SNT1618, and SNT1638
SaniTEE Wastewater Screens Installation & Service Manual FOR USE WITH SNT416, SNT418, SNT818, SNT 838, SNT1618, and SNT1638 SaniTEE Manual Bio-Microbics, Inc. Revised December 2009. SaniTEE is a registered
More informationLIST PRICE. Tyler Cast Iron Soil Pipe & Fittings
LP-DWV-2081 Effective: January 2, 2008 Replaces: LP-DWV-2071 Dated: January 2, 2007 LIST PRICE Tyler Cast Iron Soil Pipe & Fittings Product... Pages PIPE & FITTINGS No-Hub... 2-6 NH RufWall... 7-9 Product...
More informationSection 2. Pipe, Valves and Fittings Sizes ¼" to 12" Schedule 80 CPVC Piping System. Serviced by GF Little Rock
Section 2 Schedule 80 CPVC Piping System Pipe, Valves and Fittings Sizes ¼" to 12" Serviced by GF Little Rock Effective March 27, 2006 Glossary Std. Pack = Standard Carton Quantity FP = Female Pipe hread
More informationTYLER UNION. Quality Waterworks Products. PC-2017, March, REGISTERED FIRMISO 9001:2015. Tyler Union
TYLER UNION Quality Waterworks Products WATERWORKS CATALOG PC-2017, March, 2017 www.tylerunion.com 10014257 U L REGISTERED FIRMISO 9001:2015 CERTIFIED Tyler Union 11910 CR 492 TYLER, TEXAS 75706 (800)
More informationSECTION VIII. (Sub-section 430) Wastewater Valves and Appurtenances. 1. General thru Gate Valves thru 430-3
SECTION VIII (Sub-section 430) Wastewater Valves and Appurtenances Article Page 1. General 430-1 thru 430-2 2. Gate Valves 430-2 thru 430-3 3. Plug Valves 430-3 thru 430-4 4. Check Valves 430-4 5. Tapping
More informationGB2 35/50 GPM Grease Interceptor for Indoor Use
INSTALLATION GUIDE GB2 35/50 GPM Grease for Indoor Use Contents Special Precautions.........................................2 Getting to Know the GB2....................................3 On the Floor Installation..................................
More informationLIST PRICE. Tyler Cast Iron Soil Pipe & Fittings
Effective: July 1, 2018 Replaces: LP-DWV-2015 Dated: January 1, 2015 LIST PRICE Tyler Cast Iron Soil Pipe & Fittings Product...Pages PIPE & FITTINGS No-Hub... 2-8 No-Hub RufWall...9-11 Product...Pages
More informationSECTION 5 AMERICAN. Ductile Iron Mechanical Joint Fittings
ECION 5 AMERICAN Ductile Iron Mechanical Joint Fittings he principal standards covering full body mechanical joint fittings are ANI/AWWA C110/A21.10 and ANI/AWWA C111/A21.11. Compact ductile iron fittings
More informationLIST PRICE. Tyler Cast Iron Soil Pipe & Fittings
Effective: January 1, 2019 Replaces: LP-DWV-2018 Dated: July 1, 2018 LIST PRICE Tyler Cast Iron Soil Pipe & Fittings Product...Pages PIPE & FITTINGS No-Hub... 2-8 No-Hub RufWall...9-11 Product...Pages
More informationNSF/ANSI 61 Drinking Water System Components Health Effects
The Public Health and Safety Organization NSF Product and Service Listings These NSF Official Listings are current as of Thursday, January 08, 2015 at 12:15 a.m. Eastern Time. Please contact NSF International
More informationPlugs & Test Equipment for Piping Systems
Plugs & Test Equipment for Piping Systems Catalog CHERNE INDUSTRIES INC. 800.843.7584 www.cherneind.com Publication Date Mar. 2017 Cherne Industries Best in the Business From Humble Beginnings to an Industry
More informationUNION-TITE DUCTILE IRON C153 COMPACT FITTINGS
Sizes 4"-12" UL Listed for Fire Main Equipment SAMPLE SPECIFICATIONS (Current ANSI/AWWA revisions apply) 4" through 24" Push-On joint ductile iron fittings shall be produced in accordance with all applicable
More informationDWV - PVC. PVC Drain, Waste & Vent Fittings. Includes: DWV - PVC - through 8 HVAC. List Prices. Effective: February 15, 2016
Discount Codes 07 DWV-PVC through 8 22 VAC DWV - PVC PVC Drain, Waste & Vent Fittings Includes: DWV - PVC - through 8 VAC s Effective: February 15, 2016 Revised 2/29/2016 x FPT x MPT SP x MPT SP x SJ w/plastic
More informationNo-Hub NH-ABI /4 Bend Short Sweep. SILVERSPUN 10 No-Hub Pipe. Extended Short Sweep. 1/4 Bend. 1/4 Bend Long Sweep. 1/4 Bend w/2 Side Opening
Part Pieces Pieces Lift List Inv Number Size Per Lift Weight Weight Price Code SILVERSPUN 10 No-Hub Pipe 00156 1-1/2 X 10 54 30 1620 138.30 A 00158 2 X 10 64 36 2304 138.70 A 00160 3 X 10 48 54 2592 191.40
More informationBS up.v.c PRESSURE PIPE FITTINGS
BS Equal Elbow 90 Faucet Elbow 90 Equal Tee Reducing Tee To solvent weld to pipes at both end. L A B Dia. d (Gram) ½ 1 5mm 16.5 17.4 16.5 21.50mm 20 ¾ 2 0mm 19.5 19.6 18.8 26.90mm 45 1 25m m 25.5 21.9
More information