SCHEDULE 80 PVC PRESSURE FITTINGS L80P EFFECTIVE JULY 1, 2017 REVISED PRODUCTS PRICE LIST INCLUDES: SCHEDULE 80 PVC 1/4 TO 12

Transcription

1 PRICE GROUP DESCRIPTION 02 SCH 80 PVC through 8 92 SCH 80 PVC 10" AND LARGER VB GASKET for FLANGE DISCOUNT MULTIPLIER PRODUCTS SCHEDULE 80 PVC PRESSURE FITTINGS INCLUDES: SCHEDULE 80 PVC 1/4 TO 12 L80P EFFECTIVE JULY 1, 2017 REVISED

2 PVC SCHEDULE 80 Why LASCO Recommends Sealant in Threaded Joints Teflon tape, when compressed between male and female threads in PVC fittings joints, can cause deformation, leading to leakage, and possibly, to cracked female fittings. Sealant, when compressed between threads, flows outward to achieve an effective seal against leakage in PVC fittings. Flange Installation Data Gaskets and Bolts 1. Recommended Gaskets: full face ⅛ thick, elastomeric, Shore A hardness 2. Bolt Threads should be well lubricated. 3. Nut and bolt threads should be free-running during assembly 4. Follow illustrated bolt-tightening sequence. 5. Always use full size flat washers with bolts and nuts. NOTE: Flanges conform to ANSI B16.5, Class 150. Socket diameters conform to ASTM D Recommeded working pressure: F. Flanges not NSF listed. Use primer and heavy bodied PVC cement. Size Bolt Circle Diameter Number of Bolts Bolt Size (UNC x Length) Recommended Torque (Ft./Lbs.) ½ ½ 13 x 1¾ ¾ ½ 13 x 1 15 / ½ 13 x ¼ ½ 13 x 2¼ ½ ½ 13 x 2¾ ⅝ 11 x ½ ⅝ 11 x 3¼ ⅝ 11 x 3⅝ ⅝ 11 x 3¾ ¾ 10 x 3¾ ¾ 10 x 4⅜ ¾ 10 x 4⅜ /8 9 x 4½ /8 9 x 4⅝

3 TEES PVC SCHEDULE 80 TEE REDUCER TEE con t * 4 x 4 x * 4 x 4 x 1¼ * 4 x 4 x 1½ x 4 x * 4 x 2½ x 4 x * 6 x 6 x * 6 x 6 x 1¼ * 6 x 6 x 1½ * 6 x 6 x * 6 x 6 x 2½ x 6 x x 6 x ** 8 x 8 x * 8 x 8 x * 10 x 10 x * 10 x 10 x * 10 x 10 x * 10 x 10 x * 12 x 12 x * 12 x 12 x * 12 x 12 x *Sized with BUSHING ** Sized with 2 BUSHINGS x Slip x Slip ¼ ⅜ ½ ¾ ¼ ½ ½ REDUCER TEE ½ x ½ x ¼ ½ x ⅜ ¾ x ¾ x ½ x 1 x ½ x 1 x ¾ ¼ x1 x ¾ * 1¼ x 1 x * 1¼ x 1 x 1¼ * 1¼ x 1¼ x ½ * 1¼ x 1¼ x ¾ ¼ x 1¼ x * 1½ x 1¼ x * 1½ x 1½ x ½ ½ x 1½ x ¾ ½ x 1½ x ½ x 1½ x 1¼ x 2 x ½ x 2 x ¾ x 2 x x 2 x 1¼ x 2 x 1½ * 2½ x 2½ x ½ x 2½ x 1¼ ½ x 2½ x 1½ ½ x 2½ x * 3 x 3 x ½ * 3 x 3 x ¾ * 3 x 3 x * 3 x 3 x 1¼ x 3 x 1½ x 3 x * 3 x 3 x 2½ * 4 x 4 x ½ * 4 x 4 x ¾ x Slip x FPT x FPT TEE ½ ¾ ¼ ½ REDUCING TEE * ½ x ½ x ¼ * ¾ x ¾ x ½ * 1 x 1 x ½ * 1 x 1 x ¾ * 1¼ x 1¼ x ½ * 1¼ x 1¼ x ¾ * 1¼ x 1¼ x * 1½ x 1½ x ½ * 1½ x 1½ x ¾ * 1½ x 1½ x * 1½ x 1½ x 1¼ * 2 x 2 x ½ * 2 x 2 x ¾ * 2 x 2 x x 2 x 1¼ x 2 x 1½

4 PVC SCHEDULE 80 TEES, ELBOWS x FPT FPT x FPT x FPT REDUCING TEE con t ½ x 2½ x 1½ * 2½ x 2½ x * 3 x 3 x ½ * 3 x 3 x ¾ * 3 x 3 x * 3 x 3 x 1¼ * 3 x 3 x 1½ * 3 x 3 x * 3 x 3 x 2½ * 4 x 4 x ½ * 4 x 4 x ¾ * 4 x 4 x * 4 x 4 x 1¼ * 4 x 4 x 1½ * 4 x 4 x * 4 x 4 x 2½ * 4 x 4 x * 6 x 6 x * 6 x 6 x 2½ * 6 x 6 x * 6 x 6 x *Sized with BUSHING TEE ¼ ⅜ ½ ¾ ¼ ½ ½ Slip x FPT FPT x FPT ELBOWS 90 ELL ¼ ⅜ ½ ¾ ¼ ½ ½ ELL ½ ¾ ¼ ½ REDUCING 90 ELL ¼ ⅜ ½ ¾ ¼ ½ ½ ¼ ELL * * * Fabricated from Pipe 4

5 ELBOWS, CROSS, COUPLINGS PVC SCHEDULE 80 22½ ELL * * Note: Meets ASTM D-2467 socket and wall dimensions, but fitting pattern is not in D Working pressure rating of 150 p.s.i. Not NSF Standard 14 Listed. * Fabricated from Pipe x CROSS CROSS ½ ELL x REDUCING CROSS * 1½ X ½ * 1½ X ¾ * 1½ X * 1½ X 1¼ *Sized with BUSHING FPT x FPT 45 ELL ¼ ⅜ ½ ¾ ¼ ½ ½ ELL ½ ¾ ¼ ½ ½ COUPLINGS COUPLING ¼ ⅜ ½ ¾ ¼ ½ ½ REDUCER COUPLING * ⅜ x ¼ * ½ x ¼ ¾ x ½ x ¾ * 1¼ x ½ * 1¼ x ¾ ¼ x * 1½ x ½ * 1½ x ¾ ½ x

6 PVC SCHEDULE 80 COUPLINGS, ADAPTERS REDUCER COUPLING con t ½ x 1¼ * 2 x ½ * 2 x ¾ * 2 x * 2 x 1¼ x 1½ * 2½ x 1¼ * 2½ x 1½ * 2½ x * 3 x * 3 x 1¼ * 3 x 1½ x * 3 x 2½ * 4 x * 4 x 1½ * 4 x * 4 x 2½ x * 6 x * 6 x x x * 10 x * 10 x * 10 x * 10 x *Sized with BUSHING Slip x FPT MPT x Slip ADAPTERS FEMALE ADAPTER ¼ ½ ¾ ¼ ½ ½ MALE ADAPTER ½ ¾ ¼ ½ ½ FPT x FPT COUPLING ¼ ½ ¾ ¼ ½ ½

7 BUSHINGS PVC SCHEDULE 80 REDUCER BUSHING (FLUSH STYLE) REDUCER BUSHING (FLUSH STYLE) con t x x *Sized with Bushing SP x Slip ⅜ x ¼ ½ x ¼ ½ x ⅜ ¾ x ½ * 1 x ⅜ x ½ x ¾ ¼ x ½ ¼ x ¾ ¼ x ½ x ½ ½ x ¾ ½ x ½ x 1¼ x ½ x ¾ x x 1¼ x 1½ * 2½ x ½ * 2½ x ¾ ½ x ½ x 1¼ ½ x 1½ ½ x * 3 x ½ * 3 x ¾ x x 1¼ x 1½ x x 2½ * 4 x ½ * 4 x ¾ * 4 x * 4 x 1¼ * 3 x 1½ x x 2½ x * 6 x ¾ * 6 x * 6 x 1¼ * 6 x 1½ x * 6 x 2½ x x * 8 x * 8 x x * 10 x x X * 12 x SP x Slip SP x FPT MPT x FPT REDUCER BUSHING (FLUSH STYLE) ⅜ x ¼ ½ x ¼ ¾ x ¼ ¾ x ½ * 1 x ½ x ½ x ¾ ¼ x ½ ¼ x ¾ ¼ x ½ x ¼ ½ x ½ ½ x ¾ ½ x ½ x 1¼ x ½ x ¾ x x 1¼ x 1½ * 2½ x ½ * 2½ x ¾ * 2½ x 1¼ * 2½ x 1½ ½ x * 3 x ¾ * 3 x * 3 x 1¼ * 3 x 1½ x x 2½ * 3 x 1½ x * 4 x 2½ x * 6 x * 6 x x REDUCER BUSHING (FLUSH STYLE) ⅜ x ¼ ½ x ¼ ½ x ⅜ ¾ x ¼ ¾ x ⅜ ¾ x ½ x ¼ x ⅜

8 PVC SCHEDULE 80 BUSHINGS, CAPS, PLUGS MPT x FPT REDUCER BUSHING (FLUSH STYLE) con t x ½ x ¾ ¼ x ½ ¼ x ¾ ¼ x ½ x ½ ½ x ¾ ½ x ½ x 1¼ x ½ x ¾ x x 1¼ x 1½ ½ x x 1½ x x 2½ x x FPT CAPS PLUGS CAP ¼ ⅜ ½ ¾ ¼ ½ ½ MPT x BSP REDUCER BUSHING (FLUSH STYLE) x SP PLUG ¾ ¼ ½ Slip CAPS CAP ¼ ⅜ ½ ¾ ¼ ½ ½ MPT PLUG ¼ ⅜ ½ ¾ ¼ ½ ½

9 FLANGES PVC SCHEDULE 80 FLANGE (SOLID STYLE) FLANGE (LOOSE RING) con t FT FT FT Represents FiberTuff Ring. See NOTE under Flange Installation Data (pg. 2) Slip FPT ½ ¾ ¼ ½ ½ See NOTE under Flange Installation Data (pg. 2) FLANGE (SOLID STYLE) ½ ¾ ¼ ½ ½ See NOTE under Flange Installation Data (pg. 2) Slip SP FLANGE (LOOSE RING) ½ ¾ ¼ ½ ½ FT FT FT FT FT FT FT FT Represents FiberTuff Ring. See NOTE under Flange Installation Data (pg. 2) FLANGE HUB SPIGOT Blind Slip FLANGE ½ ¾ ¼ ½ ½ See NOTE under Flange Installation Data (pg. 2) FLANGE (LOOSE RING) ½ ¾ ¼ ½ ½ FT FT FT FT FT SP Slip FLANGE HUB SOCKET FLANGE GASKET 20GE FOR 2 FLANGE 25 VB GE FOR 2½ FLANGE 25 VB GE FOR 3 FLANGE 25 VB GE FOR 4 FLANGE 25 VB GE FOR 5 FLANGE 10 VB GE FOR 6 FLANGE 10 VB GE FOR 8 FLANGE 5 VB GE FOR 10 FLANGE 5 VB GE FOR 12 FLANGE 5 VB NOTE: Bolt sets for Flange x Flange connections are not offered. For bolt size and quantity requirements, see page 2. Gaskets are: EPDM material, ANSI B16.5 Class 150 dimensions, 1/8 Thick 9

10 PVC SCHEDULE 80 NIPPLES, WYES, UNIONS NIPPLES UNIONS MPT x MPT WYES x Slip x Slip REDUCING TBE NIPPLE ¾ x ½ See Nipple Price List (discounts will vary) WYE psi working pressure 150 psi working pressure 100 psi working pressure REDUCING WYE * 2 x 2 x ½ * 2 x 2 x ¾ * 2 x 2 x * 2 x 2 x 1¼ * 2 x 2 x 1½ * 3 x 3 x * 3 x 3 x 1¼ * 3 x 3 x 1½ * 3 x 3 x * 3 x 3 x 2½ * 4 x 4 x * 4 x 4 x * 6 x 6 x * 6 x 6 x x 6 x * 8 x 8 x * 8 x 8 x x 8 x * 8 x 8 x * Sized with Bushing 235 psi working pressure 150 psi working pressure 100 psi working pressure Slip x MPT FPT x FPT Slip x FPT UNION (O-RING TYPE) ½ ¾ ¼ ½ ¼ x Pressure rated at 235 p.s.i. at 73 F. Unions are listed as NSF 61. UNION (O-RING TYPE) ¼ ⅜ ½ ¾ ¼ ½ Pressure rated at 235 p.s.i. at 73 F. Unions are listed as NSF 61. UNION (O-RING TYPE) ½ ¾ ¼ ½ Pressure rated at 235 p.s.i. at 73 F. Unions are listed as NSF 61. UNION (O-RING TYPE) ½ ¾ ¼ ½ Pressure rated at 235 p.s.i. at 73 F. Unions are listed as NSF

11 UNION O-RINGS PVC SCHEDULE 80 Viton UNION O-RING (CURRENT STYLE) ½ ¾ ¼ ½ Viton UNION O-RING (PRIOR TO 2004) ½ ¾ ¼ ½

12 PVC SCHEDULE 80 CUSTOMER SERVICE Phone: (800) Fax: (731) Limited Warranty LASCO Fittings, Inc. products are warranted to be free from manufacturing defects in materials and workmanship. They are warranted against rot, rust, and electrolytic corrosion for a period of three years from date of installation. If LASCO products prove defective due to manufacturing defects in material or workmanship during that period, the manufacturer will provide new replacement units of the same type and size. No remedy will be granted under this warranty if LASCO products are not used strictly in accordance with LASCO s directions with respect to use and storage or if the products have been modified in any way. THE MANUFACTURER S LIABILITY UNDER EXPRESSED OR IMPLIED WARRANTY OR FOR ANY REASON IS LIMITED TO FURNISHING REPLACEMENT UNITS OR GRANTING A CREDIT FOR DEFECTIVE UNITS. NO LABOR EXPENSE OR CONSEQUENTIAL DAMAGES WILL BE PAID BY LASCO. THIS WARRANTY IS IN LIEU OF ALL OTHER GUARANTEES AND WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PURPOSE, EXCEPT FOR ANY WARRANTIES IMPLIED BY LAW FOR NONCOMMERCIAL CONSUMERS. ANY SUCH WARRANTIES ARE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. DO NOT USE LASCO FITTINGS FOR COMPRESSED AIR OR GASES. DO NOT TEST PVC PIPING SYSTEMS WITH COMPRESSED AIR OR GASES. DO NOT USE FITTINGS WITH LIQUIDS NOT RECOMMENDED BY LASCO. MODIFICATIONS OF FITTINGS VOIDS THE WARRANTY. STANDARDS AND SPECIFICATIONS SCHEDULE 80P ASTM D-1784 Rigid Poly (Vinyl Chloride) (PVC) Compounds and Chlorinated Poly Vinyl Chloride) (CPVC) Compounds. ASTM D-2464 Threaded type Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80. ASTM D-2467 Socket Type Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80. ASTM F-1970 Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems. MATERIAL LASCO Schedule 80 Fittings are produced from PVC TYPE 1, CELL Classification B. O-RINGs are produced from a fluorocarbon elastomer (VITON). LISTINGS NSF (National Sanitation Foundation) for potable water services. Standard Terms and Conditions of Sale 1. Terms: 2% 35 days, net 45 days. 2. Freight: FOB LASCO warehouses. Prepaid on orders totaling $1500 net for one shipment to single destination within the contiguous United States. 3. Minimum Order: $100 net. Smaller orders billed at this minimum charge. 4. Claims for shipping errors must be made within 15 days to LASCO. Claims for damage or shortages should be directed promptly to the common carrier by the consignee. 5. Returns will be accepted only by prior authorization and if shipped freight prepaid. Returned merchandise subject to a MINIMUM 25% handling/restocking charge. 6. Pricing is subject to change without prior notice. However, prior notification will be given in the event of price changes in the period between order placement and scheduled shipment. 7. Offer to sell is not implied by possession of this or other LASCO price lists. REVISIONS: PAGE 3 - PRICING CORRECTED ON ITEMS THROUGH PAGE 10 - CORRECTION TO SIZING ON , PAGE 10 - CORRECTION TO PART NUMBER