Discount Codes 07 DWV-PVC through 8 22 HVAC DWV - PVC. PVC Drain - Waste Vent Fittings. Includes: DWV - PVC - through 8 HVAC.
|
|
- Ross Jackson
- 6 years ago
- Views:
Transcription
1 Discount Codes 07 DWV-PVC through 8 22 HVAC DWV - PVC PVC Drain - Waste Vent Fittings Includes: DWV - PVC - through 8 HVAC s Effective: March 14, 2011
2 1 H x FPT H x MPT SP x MPT SP x SJ w/plastic Nut & Washer SP x SJ w/chrome Nut & Washer H x MPT COUPLING D ¼ $4.10 D ½ $1.17 D $1.52 D $5.24 D $9.28 D $30.23 D $74.00 FEMALE ADAPTER D ¼ $7.41 D ½ $2.18 D $3.70 D $9.96 D $12.77 D $42.88 MALE ADAPTER D ¼ $3.69 D ½ $2.26 D $2.94 D $8.43 D $18.67 D ½ x ¼ $2.40 PIPE INCREASER - REDUCER D x 1½ $3.38 D x 1½ $10.30 D x $7.91 D x $15.68 D x $16.68 D x $58.54 D x $93.84 D x $91.05 TRAP ADAPTER, MALE D ½ $2.98 D $8.84 D ½ x 1¼ $2.80 TRAP ADAPTER, MALE D ¼ $5.81 D ½ $3.51 D $10.87 D ½ x 1¼ $3.74 TRAP ADAPTER, MALE D ½ $4.91 D $13.96 D ½ x 1¼ $4.80 TRAP ADAPTER, FEMALE D ½ $2.62 D $6.68 D ½ x1¼ $3.18 H x SJ w/plastic Nut & Washer H x SJ w/chrome Nut & Washer SP x FPT SP MPT MPT SP x H TRAP ADAPTER, FEMALE D ¼ $3.70 D ½ $3.34 D $6.68 D ½ x 1¼ $3.51 TRAP ADAPTER, FEMALE D ½ $4.91 D $9.35 D ½ x 1¼ $4.80 FITTING CLEANOUT ADAPTER D ¼ $1.58 D ½ $2.52 D $3.55 D $10.01 D $16.44 D $44.01 FITTING CLEANOUT ADAPTER + C.O. PLUG D ½ $3.75 D $5.15 D $10.43 D $18.90 D $54.48 CLEANOUT PLUG, RAISED NUT D ¼ $2.55 D ½ $2.06 D $2.12 D $4.10 D $6.05 D $20.14 D $ CLEANOUT PLUG, FLUSH D $6.96 D $8.08 D $8.13 FLUSH BUSHING D ½ x 1¼ $4.19 D x 1¼ $4.29 D x 1½ $2.00 D x 1½ $9.63 D x $5.03 D x $16.76 D x $8.56 D x $44.31 D x $ D x $96.45
3 SP x FPT Adapts DWV Hub to S&D Spigot SP x H FLUSH BUSHING D x 1½ $6.53 CAP ½ * * * * * * * Refer to current Sch 40 Price List ADAPTER COUPLING D x $13.69 ADAPTER BUSHING D $12.81 D $7.16 NO - HUB ADAPTER D $6.06 D $8.77 D $11.28 HUB ADAPTER, CAST IRON SOIL PIPE D $14.15 D $19.00 D $23.42 HUB ADAPTER, CAST IRON SOIL PIPE D $9.83 D $17.60 D $30.83 HUB ADAPTER, CAST IRON SOIL PIPE INCREASER D x 1½ $11.27 D x $20.78 REPAIR COUPLING D ½ $6.34 D $4.43 D $11.18 D $21.53 TEST CAP, INSERT TYPE D ½ $1.92 D $1.70 D $2.06 D $2.59 TEST CAP, PIPE D ½ $1.68 D $1.60 D $2.06 D $2.59 EXPANSION JOINT D ½ $57.45 D $85.80 D $ D $ EXPANSION JOINT D ½ $46.76 D $95.20 D $ D $ /4 BEND, STREET w/low HEEL INLET D x $37.19 SP x 1/4 BEND D ¼ $7.85 D ½ $2.34 D $3.70 D $10.90 D $21.49 D $75.42 D $ /4 BEND, w/side INLET D x 1½ $26.10 D x $22.24 x H 1/4 BEND, STREET D ¼ $9.45 D ½ $3.14 D $4.77 D $12.08 D $22.72 D $ D $ /4 BEND, w/low HEEL INLET D x 1½ $18.05 D x $19.63 D x $38.74 LONG SWEEP 1/4 BEND D ½ $5.63 D $6.09 D $14.34 D $
4 x H SP X H LONG SWEEP 1/4 BEND w/low HEEL INLET D x $33.54 LONG SWEEP 1/4 BEND, STREET D ½ $7.44 D $9.47 D $26.03 D $ /6 BEND D ½ $4.43 D $5.89 D $20.94 D $ /6 BEND, STREET D ½ $8.84 D $11.96 D $28.03 D $ /8 BEND D ½ $2.30 D $3.31 D $9.76 D $17.12 D $69.03 D $ /8 BEND, STREET D ½ $2.28 D $3.51 D $9.56 D $16.35 D $84.55 D $ /16 BEND D ½ $3.23 D $4.01 D $10.26 D $15.68 D $ /16 BEND, STREET D ½ $9.13 D $9.78 D $15.39 D $22.43 D $91.29 x H x SP DOUBLE 1/4 BEND D ½ $8.04 D $11.27 D $34.48 D x 1½ $10.74 CLOSET BEND, REDUCING D x $18.08 CLOSET BEND, REDUCING D x $26.38 VENT ELL D ½ $4.71 D $6.56 D $16.53 D $41.58 D $ D $ VENT ELL, STREET D ½ $4.01 D $7.84 D $17.99 D $62.40 D $ D $ SANITARY TEE D ¼ $6.78 D ½ $4.26 D $6.24 D $16.01 D $27.86 D $ D $ SANITARY TEE, REDUCING D x 1½ x 1½ $5.49 D x 1½ x $6.66 D x 2 x 1½ $5.52 D x 3 x 1½ $11.61 D x 3 x $12.27 D x 4 x $26.09 D x 4 x $35.45 D x 6 x $ SANITARY TEE, STREET D ½ $11.46 D $12.46 D $20.77 D $
5 x SP SP X H SANITARY TEE, STREET REDUCING D x 1½ x 1½ $10.42 D x 1½ x $9.44 D x 2 x 1½ $9.77 D x 3 x 1½ $21.72 D x 3 x $20.52 D x 4 x $32.75 SANITARY TEE w/left SIDE INLET D x 1½ $30.99 D x $29.86 D x $53.41 SANITARY TEE w/right SIDE INLET D x 1½ $30.99 D x $29.86 D x $53.41 SANITARY TEE w/r & L SIDE INLET D x 1½ 5 24 $32.72 D x $39.49 D x $54.10 DOUBLE SANITARY TEE D ½ $8.69 D $12.76 D $35.66 D $57.34 DOUBLE SANITARY TEE, REDUCING D x 1½ $9.63 D x 1½ $20.47 D x $21.53 D x $47.43 D x $48.67 DOUBLE SANITARY TEE, STREET D $51.89 D x 1½ $16.46 D x 3 x 2 x $18.00 DOUBLE SANITARY TEE, w/side INLET D x1½ $40.76 D x $38.13 D x $60.08 DOUBLE SANITARY TEE, w/r & L SIDE INLET D x1½ $44.82 D x $45.52 D x $63.68 VENT TEE D ½ 25 8 $10.97 D $9.28 D $28.91 D $38.28 D $ D $ CLEANOUT TEE + C.O. PLUG D ½ $10.74 D $12.40 D $23.70 D $37.28 D $ D $ CLEANOUT TEE D ½ $7.73 D $9.47 D $18.90 x FPT D $35.16 D $ D $ FLUSH CLEANOUT TEE (Test Tee) D X $14.72 D X $27.74 D X x FPT $37.99 (One Piece) (One Piece) (Two Piece) TWO-WAY CLEANOUT D $38.20 D $49.45 COMBINATION WYE + 1/8 BEND - LONG TURN D ½ $9.23 D $10.98 D $27.32 D $54.15 COMBINATION WYE + 1/8 BEND - LONG TURN, REDUCING D x 1½ 5 64 $12.05 D x1½ $13.26 D x 1½ $22.98 D x $18.06 D x $29.38 D x $36.70 COMBINATION WYE + 1/8 BEND (Two Piece) D ½ $9.28 D $11.33 D $29.87 D $69.80 D $ D $
6 5 (Two Piece) COMBINATION WYE + 1/8 BEND, REDUCING (Two PC) D x $33.24 D x $61.55 D x $ D x $ D x $ DOUBLE COMBINATION WYE + 1/8 BEND D $73.85 D $ D x $ D x $ DOUBLE FIXTURE FITTING D $46.87 D x 1½ $23.87 D x2x3x $46.39 WYE D ½ $6.49 D $7.61 D $20.56 D $37.29 D $ D $ WYE, REDUCING D x 1½ x $10.74 D x 2 x 1½ $9.35 D x 3 x 1½ $13.45 D x 3 x $15.20 D x 4 x $22.44 D x 4 x $30.26 D x 6 x $ D x 6 x $82.72 D x 8 x $ D x 8 x $ WYE, STREET D ½ $10.30 D $12.24 SP x D $26.05 D $51.65 WYE, STREET, REDUCING D x 3 x 1½ $24.10 D x 3 x $23.75 SP x D x 4 x $56.96 D x 4 x $48.34 UPRIGHT COMBINATION WYE & 1/8 BEND (Two PC) D $22.75 D $40.53 D x 2 x 1½ $23.54 x H D x $43.29 DOUBLE COTTAGE WYE w/2 INLET D $ D $ DOUBLE WYE D ½ $14.69 D $15.81 D $40.76 D $82.69 D $ DOUBLE WYE, REDUCING D x1½ $14.45 D x 1½ $28.82 D x $30.37 D x $49.58 D x $65.48 D x $ COTTAGE WYE, LH INLET D $59.13 D $ COTTAGE WYE, RH INLET D $59.13 D $ RETURN BEND D ½ $6.53 D $12.46 D $34.69 D $68.56 P-TRAP D ½ $8.15 D $10.99 D $37.25 D $84.94 P-TRAP, LOW PROFILE D ½ $5.35 D $7.19 P-TRAP w/cleanout D ½ $13.45 D $22.81 P-TRAP, UNION D ½ $10.42 D $22.62
7 H x SJ w/plastic Nut HUB SP LA PATTERN P-TRAP D ½ $17.76 D ½ x 1¼ $20.75 DRUM TRAP D x 6 x 1½ $32.98 CLOSET FLANGE (One Piece) D $10.86 D x $9.56 CLOSET FLANGE (One Piece) D $11.16 D x $11.62 CLOSET FLANGE w/knock OUT (One Piece) D x $11.14 HVAC List Price RUNNING TRAP HRT-507 ¾ (½) 25 $1.66 Connection is both ½ socket x ¾ spigot P - TRAP HPT-507 ¾ (½) 25 $1.66 Connection is both ½ socket x ¾ spigot CLEANOUT TEE H ½ 50 $1.95 H ¾ 50 $3.02 HUB CLOSET FLANGE, ADJUSTABLE w/metal RING D $26.49 D x $20.68 DRAIN PAN H ¾ 25 $4.32 CLOSET FLANGE, ADJUSTABLE w/metal RING D $28.89 D x $25.06 DRAIN PAN H ¾ 50 $1.43 H $1.64 FLUSH CLOSET FLANGE w/knock OUT D x $17.81 OFFSET CLOSET FLANGE D w/plastic Ring 4x $33.57 D Adjustable w/metal Ring 4x $
8 TERMS AND CONDITIONS OF SALE 1. Terms: 2% 35 days, Net 45 Days. Headquarters 414 Morgan Street P.O. Box 116 Brownsville, TN / / Fax: 731/ Service Centers 6131 Knott Avenue Buena Park, CA / / Fax: 714/ Holly Street, Unit A Denver, CO / / Fax: 303/ Kingspointe Parkway, Suite 400 Orlando, FL / / Fax: 407/ Beaudin Blvd, Suite 600 Woodridge, IL / / Fax: 630/ Lasley Avenue Wilkes Barre, PA / / Fax: 570/ Kelly Blvd., Suite 130 Carrollton, TX / / Fax: 972/ South 228th Street Kent, WA / / Fax: 425/ Printed in U.S.A. L11-DWV-5M 10/ LASCO Fittings, Inc. LASCO is licensed to LASCO Fittings, Inc by LASCO Bathware, Inc. 2. Freight: FOB Lasco Fittings warehouses. DWV Products Alone: Prepaid on orders for fi ttings totaling $1500 net for one shipment to a single destination within the contiguous United States. Mixed Product Shipment (Pressure and DWV): Prepaid on orders for fi ttings totaling $1500 net for one shipment to a single destination within the contiguous United States. 3. Minimum Order: $50 net. Smaller orders billed at this minimum charge. 4. Claims for shipping errors must be made within 15 days to Lasco. Claims for damage or shortages should be directed promptly to the common carrier by the consignee. 5. Returns will be accepted only by prior authorization and if shipped freight prepaid. Returned merchandise is subject to a MINIMUM 20% handling / restocking charge. 6. Pricing is subject to change without prior notice. However, prior notifi cation will be given in the event of price changes in the period between order placement and scheduled shipment. 7. Offer to Sell is not implied by possession of this or other Lasco price lists. LIMITED WARRANTY Lasco fi ttings are warranted to be free from manufacturing defects in materials and workmanship. They are warranted against rot, rust, and electrolytic corrosion for a period of 3 years from date of installation. If Lasco fi ttings prove defective due to manufacturing defects in material or workmanship during that period, the manufacturer will provide new replacement units of the same type and size. No remedy will be granted under this warranty if Lasco fi ttings are not used strictly in accordance with Lasco s directions with respect to use and storage or if the fi ttings have been modified in any way. THE MANUFACTURER S LIABILITY UNDER EXPRESSED OR IMPLIED WARRANTY OR FOR ANY REASON IS LIMITED TO FURNISHING REPLACEMENT UNITS OR GRANTING A CREDIT FOR DEFECTIVE UNITS. NO LABOR EXPENSE OR CONSEQUENTIAL DAMAGES WILL BE PAID BY LASCO. THIS WARRANTY IS IN LIEU OF ALL OTHER GUARANTEES AND WARRANTIES, EXPRESSED OR IM- PLIED, INCLUDING BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABIL- ITY AND FITNESS FOR PURPOSE, EXCEPT FOR ANY WARRANTIES IMPLIED BY LAW FOR NONCOMMERCIAL CONSUMERS. ANY SUCH WARRANTIES ARE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. DO NOT USE LASCO FITTINGS FOR COMPRESSED AIR OR GASES. DO NOT TEST PVC PIPING SYSTEMS WITH COMPRESSED AIR OR GASES. DO NOT USE FITTINGS WITH LIQUIDS NOT RECOMMENDED BY LASCO. MODIFICATIONS OF FITTINGS VOID THE WARRANTY. STANDARDS AND SPECIFICATIONS ASTM D-2665 Poly (Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings. ASTM D-1784 Rigid Poly (Vinyl Chloride) (PVC) Compounds and Chlorinated Poly (Vinyl Chloride) (CPVC) Compounds. ASTM D-3311 Drain, Waste, and Vent (DWV) Plastic Fittings Patterns MATERIAL Lasco DWV Fittings are produced from PVC Type I, Cell Classification B. PVC Fittings are listed by NSF (National Sanitation Foundation). Product is certifi ed to the Uniform Plumbing Code. Visit our worldwide website
DWV - PVC. PVC Drain, Waste & Vent Fittings. Includes: DWV - PVC - through 8 HVAC. List Prices. Effective: February 15, 2016
Discount Codes 07 DWV-PVC through 8 22 VAC DWV - PVC PVC Drain, Waste & Vent Fittings Includes: DWV - PVC - through 8 VAC s Effective: February 15, 2016 Revised 2/29/2016 x FPT x MPT SP x MPT SP x SJ w/plastic
More informationDWV-PVC PVC DRAIN, WASTE & VENT FITTINGS PRODUCTS PRICE LIST INCLUDES HVAC PRODUCTS. 07 DWV- PVC through 8 22 HVAC
PRICE GROUP DESCRIPTION DISCOUNT MULTIPLIER 07 DWV- PVC through 8 22 VAC PRODUCTS PRICE LIST DWV-PVC PVC DRAIN, WASTE & VENT FITTINGS INCLUDES VAC PRODUCTS DWV-PVC EFFECTIVE SEPTEMBER 18, 2017 KEY:...ub
More informationSchedule 80 - CPVC Pressure Fittings
Discount Codes 03 Schedule 80 CPVC Schedule 80 - CPVC Pressure Fittings List Prices Effective: August 25, 2012 Revised September 2014 2 Schedule 80 - CPVC Products Catalog www.lascofittings.com Pricing
More informationSCHEDULE 80 PVC PRESSURE FITTINGS L80P EFFECTIVE JULY 1, 2017 REVISED PRODUCTS PRICE LIST INCLUDES: SCHEDULE 80 PVC 1/4 TO 12
PRICE GROUP DESCRIPTION 02 SCH 80 PVC through 8 92 SCH 80 PVC 10" AND LARGER VB GASKET for FLANGE DISCOUNT MULTIPLIER PRODUCTS SCHEDULE 80 PVC PRESSURE FITTINGS INCLUDES: SCHEDULE 80 PVC 1/4 TO 12 L80P
More informationSchedule 80 - CPVC Pressure Fittings
Discount Codes 03 Schedule 80 CPVC Schedule 80 - CPVC Pressure Fittings List Prices L15-80C Effective: March 26, 2015 Revised 9.22.2016 2 Schedule 80 - CPVC Products Catalog www.lascofittings.com Pricing
More informationSWING JOINT & HEAVY TURF
PRICE GROUP DESCRIPTION 11 SWING JOINT 08 HEAVY TURF DISCOUNT MULTIPLIER PRODUCTS SWING JOINT & HEAVY TURF IRRIGATION FITTINGS INCLUDES: PVC SWING JOINTS AND IRRIGATION ACCESSORIES LSJHT EFFECTIVE JULY
More informationDWV PVC DWV Drain Waste Vent Fittings
STANDARDS & SPECIFICATIONS Standards provide greater assurance of product performance and consistency, and are available to assist design engineers in system specification. The most frequently referenced
More informationComplete Male and Female Manifold System
Complete Male and Female Manifold System 1200 Series Female Valve Connectors LASCO s Patent Pending Telescoping Manifold System accommodates replacing valves (with different lay lengths) without cutting
More informationABS-0918 SUPERSEDES ABS-0318 ASTM D2661 R/SEPT ABS DWV FITTINGS.
ABS-0918 SUPERSEDES ABS-0318 ASTM D2661 R/SEPT. 2018 ABS DWV FITTINGS www.bow-group.com COUPLING 1 1/4" 601112 125 9,000 5.63 1 1/2" 601120 125 9,000 3.48 2" 601138 100 4,800 4.65 3" 601146 45 1,440 13.07
More informationABS DWV FITTINGS ABS-1116 NOVEMBER 2016 SUPERCEDES ABS-1215 ASTM D2661
ABS DWV FITTINGS ABS-1116 NOVEMBER 2016 SUPERCEDES ABS-1215 ASTM D2661 COUPLING 1 1/4" 601112 125 9,000 3.36 1 1/2" 601120 125 9,000 2.25 2" 601138 100 4,800 3.03 3" 601146 45 1,440 8.49 4" 601153 25 800
More information2348 Linden Blvd Brooklyn, NY Tel: (718) Fax: (718) PVC DWV FITTINGS
2348 Linden Blvd Brooklyn, NY 11208 Tel: (718) 566-1000 Fax: (718) 566-1799 Email: sales@alroproducts.com www.alroproducts.com PVC DWV FITTINGS 2348 Linden Blvd Brooklyn, NY 11208 Tel: (718) 566-1000 Fax:
More informationABS-C0717 JULY 2017 SUPERSEDES ABS-C0217 CSA B181.1 ABS DWV FITTINGS.
ABS-C0717 JULY 2017 SUPERSEDES ABS-C0217 CSA B181.1 ABS DWV FITTINGS www.bow-group.com dimension item Ctn Skid list price dimension item Ctn Skid list price SANITARY TEE (Hub x Hub x Hub) 1 1/4" 600007
More information(718)
1 of 19 PVCDWV 090418 P9599 P9512 P9513 P9555 P9514 P10435 P11483 P9805 P10072 P10831 P10797 P10554 Coupling (H H) (718) 566-1000 Female Adapter (FPT H) Reducing Female Adapter(HxFPT) Product(s) Part Number
More informationABS-C0219 FEB SUPERSEDES ABS-C0717R CSA B181.1 ABS DWV FITTINGS.
ABS-C0219 FEB. 2019 SUPERSEDES ABS-C0717R CSA B181.1 ABS DWV FITTINGS www.bow-group.com DIMENSION ITEM CTN SKID LIST PRICE DIMENSION ITEM CTN SKID LIST PRICE SANITARY TEE (Hub x Hub x Hub) 1 1/4" 600007
More informationIRRIGATION FITTINGS PRODUCTS PRICE LIST SWING JOINT & HEAVY TURF INCLUDES: PVC SWING JOINTS AND IRRIGATION ACCESSORIES PRICE GROUP DISCOUNT MULTIPLIER
PRICE GROUP DESCRIPTION 11 SWING JOINT 08 HEAVY TURF DISCOUNT MULTIPLIER PRODUCTS SWING JOINT & HEAVY TURF IRRIGATION FITTINGS INCLUDES: PVC SWING JOINTS AND IRRIGATION ACCESSORIES LASCO SWING JOINTS First
More informationABS DWV FITTINGS MARCH 1, 2017
LIST U10-0317-IP ABS DWV FITTINGS MARCH 1, 2017 SUPERSEDES U10-1116-IP (NOVEMBER 1, 2016) Our website pricing is the current list price and may vary from our printed price list. Please visit our website
More informationSUPERSEDES ABS-C0811/AUG.
ABS-C0612/R JUNE 2012 SUPERSEDES ABS-C0811/AUG. 2011 SANITARY TEE REDUCING TEE TEE - Left Side Inlet 600007 1 1/4" 0 62852 60000 5 50 4,800 15.41 600015 1 1/2" 0 62852 60001 2 90 2,880 8.27 600023 2"
More informationPRICE EACH PVC DWV FITTINGS SMALL AND LARGE DIAMETER MOLDED FITTINGS MARCH 1, 2017
LIST U19-0317-IP PVC DWV FITTINGS SMALL AND LARGE DIAMETER MOLDED FITTINGS MARCH 1, 2017 SUPERSEDES U19-1116-IP (NOVEMBER 1, 2016) Our website pricing is the current list price and may vary from our printed
More informationABS DWV FITTINGS FOR PLUMBING AND MECHANICAL APPLICATIONS
ABS DWV FITTINGS FOR PLUMBING AND MECANICAL APPLICATIONS Job Name Contractor Job Location Wholesaler Engineer Streamline Rep Product Description: Streamline ABS DWV ittings for use in applications including
More informationEffective Date: January 2017 Void After: January Product: ABS-DWV Pipe and Fittings File No. 1909
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
More informationPVC Gasketed Fittings for PVC IPS Pressure Pipe ENGINEERED FOR DURABILITY
For the most up-to-date version of this price list, EFFECTIVE MARCH 4, 2019 ENGINEERED FOR DURABILITY HARRINGTON CORPORATION P.O. BOX 10335 LYNCHBURG, VIRGINIA 24506-0335 For the most up-to-date version
More informationSECTIO N 15 Phone: (866) Fax: (888)
PVC FITTINGS SCHEDULE 40, 80, INSERT NYLON FITTINGS PVC & CPVC NIPPLES SECTIO N 15 www.cbsupplies.ca Phone: (866) 503-5523 Fax: (888) 562-2095 AGI@cbsupplies.ca PRODUCTS LIST SCHEDULE 40 PVC PRESSURE FITTINGS
More informationABS DWV FITTINGS JULY 1, 2011
LIST C10-11-109 JULY 1, 2011 SUPERSEDES C10-11-108 (APRIL 1, 2011) Our website pricing is the current list price and may vary from our printed price list. Please visit our website for up-to-date information.
More informationABS DWV FITTINGS APRIL 1, 2013
LIST C10-11-111 ABS DWV FITTINGS APRIL 1, 2013 SUPERSEDES C10-11-110 (JUNE 1, 2012) Our website pricing is the current list price and may vary from our printed price list. Please visit our website for
More informationABOUT NORTH AMERICAN PIPE CORPORATION
Molded PVC Fittings TABLE OF CONTENTS D-SERIES: SOLVENT WELD DWV FITTINGS CERTS: ASTM D2665, F1866, F2135, CSA B181.2, UPC, NSF... 1-5 G-SERIES: GASKETED SDR 35 SEWER FITTINGS CERTS: ASTM D3034, ASTM
More informationNo-Hub NH-ABI /4 Bend Short Sweep. SILVERSPUN 10 No-Hub Pipe. Extended Short Sweep. 1/4 Bend. 1/4 Bend Long Sweep. 1/4 Bend w/2 Side Opening
Part Pieces Pieces Lift List Inv Number Size Per Lift Weight Weight Price Code SILVERSPUN 10 No-Hub Pipe 00156 1-1/2 X 10 54 30 1620 138.30 A 00158 2 X 10 64 36 2304 138.70 A 00160 3 X 10 48 54 2592 191.40
More informationCPVC CTS Fittings, Valves & Pipe COPPER-TUBE-SIZE
CPVC CTS Fittings, Valves & Pipe COPPER-TUBE-SIZE Visit our web site: www.spearsmfg.com PRICE SCHEDULE CTS-1-1009 Effective October 26, 2009 Supersedes CTS-1-0308A TEE Socket x Socket x Socket 4101-005
More informationHub & Spigot Pipe & Fittings Price List SV-ABI-2019
Part Size & Approx Pieces List Part Size & Approx List Number Description Wt Per Lift Price Number Description Wt Price Pipe, Single Hub, 3 - ½ Lengths 244059 2 X 3.5 15 102 81.15 244066 3 X 3.5 23 60
More informationHub & Spigot Pipe & Fittings Price List SV-ABI-2018
Part Size & Approx Pieces List Part Size & Approx List Number Description Wt Per Lift Price Number Description Wt Price Pipe, Single Hub, 3 - ½ Lengths 244059 2 X 3.5 15 102 74.25 244066 3 X 3.5 23 60
More informationEVALUATION SUBJECT: CAST IRON SOIL PIPE AND FITTINGS
ICC-ES Report PMG-1220 Reissued 11/2017 This report is subject to renewal 11/2018 EVALUATION SUBJECT: CAST IRON SOIL PIPE AND FITTINGS DIVISION: 22 00 00 PLUMBING SECTION: 22 13 16 SANITARY WASTE AND VENT
More informationTOTAL MAINTENANCE SOLUTIONS
VOLUME 1, NUMBER 1 TOTAL MAINTENANCE SOLUTIONS Houston, TX Toll Free 800/392-5066 Toll Free FAX 800/342-0559 Orlando, FL Toll Free 800/327-3022 Toll Free FAX 800/327-5689 Greenville, SC Toll Free 800/476-2212
More informationLIST PRICE. Tyler Cast Iron Soil Pipe & Fittings
Effective: July 1, 2018 Replaces: LP-DWV-2015 Dated: January 1, 2015 LIST PRICE Tyler Cast Iron Soil Pipe & Fittings Product...Pages PIPE & FITTINGS No-Hub... 2-8 No-Hub RufWall...9-11 Product...Pages
More informationLIST PRICE. Tyler Cast Iron Soil Pipe & Fittings
Effective: January 1, 2019 Replaces: LP-DWV-2018 Dated: July 1, 2018 LIST PRICE Tyler Cast Iron Soil Pipe & Fittings Product...Pages PIPE & FITTINGS No-Hub... 2-8 No-Hub RufWall...9-11 Product...Pages
More informationPVC SCHEDULE 40 FITTINGS
PVC SCHEDULE 40 FITTINGS Performance Engineered & Tested 40-2-0604 SPEARS Schedule 40 PVC fitting designs combine years of proven experience with computer generated stress analysis to yield the optimum
More informationSection 12. Contain-It Secondary Containment Piping System. Serviced by GF Little Rock
Section 12 Contain-It Secondary Containment Piping System Serviced by GF Little Rock Table of Contents Contain-It Pipe 12.4 Fittings 12.5 Terminations 12.7 Centralizers 12.8 Accessories 12.9 Adhesive Requirements
More informationLIST PRICE. Tyler Cast Iron Soil Pipe & Fittings
LP-DWV-2081 Effective: January 2, 2008 Replaces: LP-DWV-2071 Dated: January 2, 2007 LIST PRICE Tyler Cast Iron Soil Pipe & Fittings Product... Pages PIPE & FITTINGS No-Hub... 2-6 NH RufWall... 7-9 Product...
More informationINTERNATIONAL MALLEABLE IRON PIPE FITTINGS & UNIONS
INTERNATIONAL MALLEABLE IRON PIPE FITTINGS & UNIONS PRICE SCHEDULE #101016 EFFECTIVE: OCTOBER 1, 2016 MADE IN BRAZIL, UNLESS NOTED 117 Gulick Street, Blossburg, PA 16912 www.wardmfg.com (800) 248-1027
More informationCOPPER FITTINGS FOR PLUMBING AND MECHANICAL APPLICATIONS
COPPER FITTINGS FOR PLUMBING AND MECHANICAL APPLICATIONS Job Name Job Location Engineer Contractor Wholesaler Streamline Rep Product Description: Streamline Wrot Copper Pressure and DWV fittings for use
More informationSection 2. Pipe, Valves and Fittings Sizes ¼" to 12" Schedule 80 CPVC Piping System. Serviced by GF Little Rock
Section 2 Schedule 80 CPVC Piping System Pipe, Valves and Fittings Sizes ¼" to 12" Serviced by GF Little Rock Effective March 27, 2006 Glossary Std. Pack = Standard Carton Quantity FP = Female Pipe hread
More informationModel 8346/8346CRP Shower & Eye/Face Wash
INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS 1455 Kleppe Lane Sparks, NV 89431-6467 (775) 359-4712 Fax (775) 359-7424 E-mail: haws@hawsco.com website: www.hawsco.com No. 2080177(15) Model 8346/8346CRP
More informationP Series. Price List Effective February 11, 2008
rice List Effective February 11, 2008 VC Solvent Weld Third party tested and listed by NSF, UC and CSA to meet ITEM IN INCHES SIZE NUMBER ART BOX QTY CRATE QTY RICE LIST Solvent Weld Sewer Fittings ITEM
More informationPRICE LIST U R-IP GREASE MANAGEMENT
PRICE LIST U39-0216R-IP GREASE MANAGEMENT FEBRUARY 1, 2016 SUPERSEDES U39-0215R2-IP (FEBRUARY 9, 2015) Our website pricing is the current list price and may vary from our printed price list. Please visit
More informationGWC Valve International
GWC Valve International PROVEN TECHNOLOGY FOR INDIVIDUAL VALVE SOLUTIONS WORLDWIDE API 6D SWING CHECK VALVES Pressure Class: ASME 150-2500 Size Range: 2-36 CATALOG NUMBER SC-1001 G W C V A L V E I N T
More informationPVC 80, 100 & 125 PSI PIP Fabricated Fittings
Discount Code(s): 3 PVC 0 PSI PIP Fabricated Fittings PVC 0 PSI PIP Fabricated Fittings PVC 5 PSI PIP Fabricated Fittings PVC 0, 0 & 5 PSI PIP Fabricated Fittings Visit our web site: www.spearsmfg.com
More informationDual Phase Extraction Inlet. Patent No Installation Manual. P/N Rev
Patent No. 6520259 Installation Manual P/N 95232 Rev 6-16-11 Table of Contents ing Extraction Inlets track changing water levels to maintain optimum performance 1.Component Identification Page 1 2. How
More informationPVC WELL CASING & FITTINGS 20 FT. BELL-END /8 SDR21 REDUCING COUPLINGS STEEL WELL CASING & FITTINGS
Pipe Pipe & Well Casing FT. BELL-END 0 7 293 2 2 29 27 23 " SCH0 -/2" SDR7 " SDR2 " SCH0 " SCH0 FT. BELL-END 37 32 30 29 2 " SCH0 -/2" SDR7 -/" DR27. PVC WELL CASING & FITTINGS FT. BELL-END 003 7 -/ SDR2
More informationTERMS OF USE TERMS AND CONDITIONS. Plumbing and Heating Products (PL-WR)
TERMS OF USE 1. Watts pricing and product data is subject to change without notice and such changes supersede all previous versions. 2. Watts data is to be used as provided. Watts is not responsible for
More informationDART Ware Wash Speed Control
DART Ware Wash Speed Control Overview Simple and value best describe the DEMA Dart. The system is extremely easy to setup and program. The Dart is suitable to deliver detergent, rinse aid and sanitizer
More informationModel 8317 Combination Shower Eye/Face Wash
INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS 1455 Kleppe Lane Sparks, NV 89431-6467 (775) 359-4712 Fax (775) 359-7424 E-mail: haws@hawsco.com website: www.hawsco.com Model 8317 Combination Shower
More informationPLUMBING WHOLESALE CATALOG
PLUMBING WHOLESALE CATALOG PLUMBING WHOLESALE CATALOG CONTENTS Tube & Pipe Copper Tube............................8-9 Plastic-Coated Copper Tube.................10 Level Wound Copper Tube..................11
More informationFloat Level Control Kits
Float Level Control Kits ASOFK, SPFK and FLC SpectraPure Inc. assumes no responsibility for water damage due to leaks. It is the user s responsibility to determine that the system is leak-free. INSTALLATION
More informationPRE-PLUMBED SEWAGE SYSTEM
PRE-PLUMBED SEWAGE SYSTEM Zoeller is a registered trademark of Zoeller Co. All Rights Reserved. MODEL #1910-0009 Español p. 13 ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems,
More informationPVC & CPVC Duct & Fabricated Duct Fittings
ount (s): 430 PVC Fabricated Duct Fittings 432 CPVC Fabricated Duct Fittings 948 PVC Fabricated Duct Pipe 949 CPVC Fabricated Duct Pipe Item prices may have changed from those shown in this sheet. See
More informationHVAC Products 2016 EDITION NCI CANADA INC.
HVAC Products 2016 EDITION NCI CANADA INC. YOUR SINGLE SOURCE SOLUTION NCI Canada Inc. is a Canadian National master distributor of high quality valves, fittings, pipes and related products serving residential,
More informationModel 8309WC Barrier Free Shower & Eye/Face Wash
INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS 1455 Kleppe Lane Sparks, NV 89431-6467 (775) 359-4712 Fax (775) 359-7424 E-mail: haws@hawsco.com website: www.hawsco.com Model 8309WC Barrier Free Shower
More informationINSTALLATION AND OPERATION MANUAL. Condensate Return Systems - Series: GV
INSTALLATION AND OPERATION MANUAL Condensate Return Systems - Series: GV WARNING! The receiver tank is NOT a pressure vessel. It MUST be vented to atmoshere to prevent pressure buildup. Any internal pressure
More informationCAST PIPE FITTINGS COUPLINGS
CAST PIPE FITTINGS COUPLINGS 00% Recyclable Recycled Content Environment Friendly 00% RECYCLABLE FIRE RATED SMOKE RATED Index HUBLESS SOIL PIPE Page TOOLS 4 5-6 7 35 8 8 9 0 5,6,25 8 2,24,25 26 27,28
More informationModel 8309WC Barrier Free Shower & Eye/Face Wash
INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS 1455 Kleppe Lane Sparks, NV 89431-6467 (775) 359-4712 Fax (775) 359-7424 E-mail: haws@hawsco.com website: www.hawsco.com No. 2067461(15) Model 8309WC
More informationROUGH PLUMBING. premium industrial products
ROUGH PLUMBING premium industrial products PREMIUM QUALITY PLUMBING PRODUCTS AMRAM AFFILIATE BRANDS For years, Cambridge Resources has been a primary source of premium quality cable management, hose clamps,
More informationINTERNATIONAL MALLEABLE IRON PIPE FITTINGS & UNIONS
INTERNATIONAL MALLEABLE IRON PIPE FITTINGS & UNIONS PRICE SCHEDULE #100217 EFFECTIVE: FEBRUARY 6, 2017 REV. 1 MADE IN BRAZIL, UNLESS NOTED 117 Gulick Street, Blossburg, PA 16912 (800) 248-1027 Sheet #100217,
More informationDURO MANUFACTURING, INC Arrowhead Drive Carson City, Nevada (775) FAX: (775)
DURO MANUFACTURING, INC. 3505 Arrowhead Drive Carson City, Nevada 89706 (775) 687-8866 FAX: (775) 687-8877 PART SA-01 SA-02 SA-03 SA-05 SA-06 SA-07 SA-08 SA-09 SA-10 SA-11 SA-12 SA-13 SA-14 SA-15 SA-16
More information2. Top Inlet 3. Branch (Branches) or Side Openings 4. Length. RH (Right Hand) Fittings Illustrated
HOW TO ORDER Guide To Ordering 1. To avoid errors, specify part numbers. 2. When selecting regular fittings, size of openings appear in this order: 1. Main 2. Branch or branches 3. When selecting reducing/increasing
More information3M Housings CH Series
Lenntech info@lenntech.com Tel. +31-152-610-900 www.lenntech.com Fax. +31-152-616-289 3M s The CH housings are constructed from 316 L or 304 stainless steel and manufactured in accordance to design and
More informationEverTUFF CPVC CTS Fittings, Valves, Pipe & Cement
CTS CPVC uct EverTUFF CPVC CTS Fittings, Valves, Pipe & Cement EverTUFF CPVC CTS Fittings, Valves, Pipe & Cement PRODUCT Contact Spears for any Information not found. Page 1 Spears Manufacturing Company
More informationintroduction VR Piston Check Valves Product Data Sheet
Product Data Sheet introduction < STANDARDS > ASTM D1784 ASTM D2466 ASTM D2467 ASTM D2464 ASTM F1498 The IPEX VR Piston Check Valve is an ideal solution for process back-flow prevention. These valves feature
More informationMARBLE PRODUCTS 2010 PRICE LIST. EFFECTIVE AUGUST 1, 2010
MARBLE PRODUCTS 2010 PRICE LIST EFFECTIVE AUGUST 1, 2010 www.takarabelmont.com LIMITED WARRANTY MARBLE PRODUCTS warrants its shampoo bowls to be made of first class material, free from defects in material
More informationOwner s Manual FS-10/FreshSpa
Owner s Manual FS-10/FreshSpa Table of Contents Product Features................ Page 2 Parts List....................... Page 3 Configuration................... Page 4 Installation.....................
More informationFOG Hog Grease Interceptor System Installation & Service Manual FOR USE WITH FOGHog FH-20, FH0-35, FH-50, FH-75, and FH-100
FOG Hog Grease Interceptor System Installation & Service Manual FOR USE WITH FOGHog FH-20, FH0-35, FH-50, FH-75, and FH-100 FOG Hog Manual 2009 Bio-Microbics, Inc. Revised Decemberl 2009. FOG Hog is registered
More informationTurbine Submersible Pumps
www.hydroflopumps.com Investment Cast Stainless Steel Impellers Turbine Submersible Pumps Hydroflo Pumps USA, Inc. 18 Loblolly Pine Blvd. Fairview, Tennessee 362 Phone: 615-799-9662 Fax: 615-799-5654 Hydroflo
More informationPROTEUS 26BA 26 Automatic Scrubber Parts List
PROTEUS 26BA 26 Automatic Scrubber Parts List The contents of this manual are based on the latest product information available at the time of publication. Pacific reserves the right to make changes or
More informationOwner s Manual Pelican Whole House Iron and Manganese Filtration System
Owner s Manual Pelican Whole House Iron and Manganese Page 2 Copyright 2011 Enviro Water Solutions Inc. All rights reserved. All information contained herein is the property of. makes no warranty of any
More informationPRICE SHEET TABLE OF CONTENTS AWWA VALVES & HYDRANTS. (PL-0418-AWWA Replaces PL-1014-VLV)
Page(s) 1 2 3 3 4 4 5 5 6 PRICE SHEET TABLE OF CONTENTS VALVES & HYDRANTS ( Replaces PL-1014-VLV) Product Line C515 NRS Gate Valves Series 1010 UL/FM C515 NRS Gate Valves Series 2010 C508 Swing Check Valves
More informationManufacturing Facility is ISO9001:2000. Welded Steel Pipe Conform to ASTM A53. Threads Conform to ASME B1.20.1
STEEL NIPPLES S40 & S80 Steel Nipple Product Specifications Manufacturing Facility is ISO9001:2000 Welded Steel Pipe Conform to ASTM A53 Threads Conform to ASME B1.20.1 800-678-2544 800-678-0857 www.msi-products.com
More informationProven technology for individual valve solutions worldwide. GWC Valve International
Proven technology for individual valve solutions worldwide FORGED STEEL VALVES GATE, GLOBE & CHECK PRESSURE CLASS: ASME 150-2500 SIZE RANGE: 1/4-3 API STANDARD: 602 ASME B16.34 Catal og Nu mb er f SV-
More informationintroduction < STANDARDS >
Product Data Sheet introduction < STANDARDS > ASTM D1784 ASTM D2464 ASTM F437 ASTM F1498 IPEX VA Air Release Valves are of a unique design, controlled by media and not pressure. Intended for use with tanks,
More informationBILT INDUSTRIES, INC.
BILT INDUSTRIES, INC. What you appreciated as Frick-Gallagher is now BILT. BILT with powder coating. QUICK-BILT KLIP-BILT SPEEDI-BILT National Sales Office 801 W. Markey Road Belton, Missouri 64012 Phone:
More informationModel 88F Twincone Magnet Wire Stripper
110 Fairgrounds Drive P.O. Box 188 Manlius, NY 13104-0188 USA 315.682.9176 FAX: 315.682.9160 OPERATOR S MANUAL Model 88F Twincone Magnet Wire Stripper PRODUCTION WIRE PROCESSING EQUIPMENT Website: www.carpentermfg.com
More informationAURORA WIRE SHELVING PRICE LIST
AURORA WIRE SHELVING PRICE LIST Effective January 6, 2014 AURORA STORAGE PRODUCTS, INC. TABLE OF CONTENTS Certificate of Warranty............................................................... Page 2
More informationModel 8300 & 8300CRP Shower/Eyewash
INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS 1455 Kleppe Lane Sparks, NV 89431-6467 (775) 359-4712 Fax (775) 359-7424 HAWS AG Bachweg 3 CH-3401 Burgdorf Switzerland Haws Mfg. Pte Lt. 2A Sungei Kadet
More informationINSTALLATION OF OFF-THE-FLOOR FIXTURES
6 Closet Carriers INSTALLATION OF OFF-THE-FLOOR FIXTURES Many factors, including cost, material, labor required, space, handling and others must be thoroughly evaluated when planning an installation. With
More informationInstallation Manual DIAPHRAGM WELL TANK
Installation Manual DIAPHRAGM WELL TANK IN-LINE SERIES: 2-5 & 7 GALLON VERTICAL SERIES: 14-20-25-32-36-52-65-86-96-119 GALLON HORIZONTAL SERIES: 7-14 & 20 GALLON NO LEAD NO LEAD: The weighted average of
More informationJOHN DEERE 9970 COTTON PICKERS
PARTS CATALOG FOR Mud Hog System II Rear Wheel Drive FOR JOHN DEERE 9970 COTTON PICKERS Mud Hog Model Numbers Tread Center OEM Aftermarket JD40005 JD47655 82, 90, 94, 106 TUTHILL Drive Systems 9098 West
More informationMTB II Modular Tension Brakes
P-259-1 819-0342 MTB II Modular Tension Brakes Installation Instructions An Altra Industrial Motion Company Introduction The instructions on this sheet cover installation of all replacement components
More informationSTAINLESS STEEL FORGED FITTINGS 3000lb 304/304L & 316/316L Forged Stainless Steel Fittings Product Specifications
STAINLESS STEEL FORGED FITTINGS 3000lb 304/304L & 316/316L Forged Stainless Steel Fittings Product Specifications Manufactured in ISO9000:2000 Facility Manufactured to ASTM/ASME A182/SA182 Items conform
More informationPolypropylene Schedule 80 Natural & Black SR Threaded Fittings
ount (s): 060 Sch 80 Threaded Natural PP Molded Fittings to 2" 061 Sch 80 Threaded Black PP Molded Fittings to 2" Item prices may have changed from those shown in this sheet. See Spears On-line Catalog
More informationWWTCKT5-SP. [User Manual] Please read and follow the installation and operating instructions provided.
WWTCKT5-SP [User Manual] Please read and follow the installation and operating instructions provided. Table of Contents I. Introduction... 1 II. Installation Instructions... 2 Step #1 Connecting the Sponges
More informationINSTALLATION AND OPERATION MANUAL. In-Line Centrifugal Pumps - Series: GB
C A L L 1-866-670-0533 O R D E R O N L I N E www.burkspumpcatalog.com INSTALLATION AND OPERATION MANUAL In-Line Centrifugal Pumps - Series: GB IMPORTANT! Read all instructions in this manual before operating
More informationJunior Sandblaster. Model #51 WARNING! FOR YOUR SAFETY PLEASE READ INSTRUCTIONS BEFORE OPERATING TOOL & WEAR EYE PROTECTION
Junior Sandblaster Model #51 WARNING! FOR YOUR SAFETY PLEASE READ INSTRUCTIONS BEFORE OPERATING TOOL & WEAR EYE PROTECTION PARTS LIST AND PART NUMBERS 01.Red Rubber Air Hose (5Ft) P51-01 02. Male Insert
More informationHeavy Duty Front-Drive Steer Axles MX-140 and MX-160 Series
Revised 11/2009 Heavy Duty Front-Drive Steer Axles MX-140 and MX-160 Series Catalog PB-0349 Strength Power Speed Agility MERITOR PARTS. RIGHT FROM THE START. TABLE OF CONTENTS MX-17/19/21-140 and MX-21/23-160
More informationSeries G. STI Gasketed Sewer Fittings SDR 35 STI. Injection Molded in Sizes 4 12 Fabricated in Sizes STI Gasketed Sewer SDR 35 G Series
Gasketed Sewer ittings SDR 35 Third party tested and listed by NS, UPC and CSA to meet specifications defined in ASTM D3034, 1336 and CSA B182.2. Gasketed Sewer ittings SDR 35 Gasketed Injection Molded
More informationA S S E M B L Y I N S T R U C T I O N S
A S S E M B L Y I N S T R U C T I O N S Please Do Not Return This Product to the Store! Contact Escalade Sports customer service department at: Phone: 1-888-USA-GOAL Toll-Free! Fax: 1-866-873-3536 Toll-Free!
More informationDimensions 12/800N 12/1200N D. DC to AC Power Inverters. OWNERS MANUAL for Models: OWNERS MANUAL April ISO 9001:2000 Certified Company
Manufacturer of Dimensions Inverters 4467 White Bear Parkway St. Paul, MN 55110 Phone: 651-653-7000 Fax: 651-653-7600 E-mail: inverterinfo@sensata.com Web: www.dimensions.sensata.com OWNERS MANUAL April
More informationLead Free Copper Alloy Valves
Price Schedule LFV-01-19 January 1, 2019 Supersedes LFV-01-18 Lead Free Copper Alloy Valves BALL VALVES 2-Pc Body FULL PORT PLATED BALL PTFE SEATS* 600 CWP/150 WSP 014 $ 9.75 0.25 20 120 038 10.95 0.25
More informationWS-50-XLE 50hp High Cycle Diamond Wire Saw
50hp High Cycle Diamond Wire Saw Part Book April 05 www.diamondproducts.com REV. 0 50hp Electric High Cycle Pneumatic Diamond Wire Saw. Setup Recommendations. Overview. Auxiliary Accessories. Fixed Motor
More informationFOR TECHNICAL ASSISTANCE
ACORN ENGINEERING COMPANY P.O. BOX 3527 CITY OF INDUSTRY, CA 91744 UNITED STATES OF AMERICA WWW.ACORNENG.COM INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS ST70 LAVATORY TEMPERING VALVE Patent #9,989,017
More information(714) Irvine Pipe & Supply, Inc.
CAST IRON SOIL PIPE COUPLING 10 LENGTHS 1-1/2 #NP15 2 #NP20 3 #NP30 4 #NP40 5 #NP50 6 #NP60 8 #NP80 LARGER SIZES AVAILABLE WRENCH 1-1/2 #NCO15 2 #NCO20 3 #NCO30 4 #NCO40 5 #NCO50 6 #NCO60 8 #NCO80 2 x
More informationSTEEL PIPE NIPPLES - WELDED Price Sheet PNW-7.18 Effective: July 16, 2018 Cancels Price Sheet PNW-3.18 of March 5, 2018
STEEL PIPE NIPPLES - WELDED Price Sheet PNW-7.18 Effective: July 16, 2018 Cancels Price Sheet PNW-3.18 of March 5, 2018 FOR THE MOST CURRENT PRODUCT/PRICING INFORMATION ON ANVIL PRODUCTS, PLEASE VISIT
More informationTKD Series 3-Way Ball Valves Product Data Sheet
Product Data Sheet < SANDARDS > ASM D1784 ASM D2466 ASM D2467 ASM D2464 ASM F1498 introduction IPEX KD Series 3-Way Ball Valves can be used for flow diverting, mixing, or on/off isolation. hey will replace
More informationModel 6518FR. NOTE TO INSTALLER: Please leave this information with the Maintenance Department. LIMITED WARRANTY
INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS 1455 Kleppe Lane Sparks, NV 89431-6467 (775) 359-4712 Fax (775) 359-7424 E-mail: haws@hawsco.com website: www.hawsco.com Model 6518FR No. 2077777(21)
More informationPARTS DIAGRAM INSTALLATION INSTRUCTIONS
SBLK-RZR1-R 1 PARTS DIAGRAM INSTALLATION INSTRUCTIONS (LH) - LEFT HAND (RH) - RIGHT HAND 1. First, you need to preassemble the new heavy duty High Lifter sway bar link. 2. If not already done, fasten the
More information