PRICE EACH PVC DWV FITTINGS SMALL AND LARGE DIAMETER MOLDED FITTINGS MARCH 1, 2017

Transcription

1 LIST U IP PVC DWV FITTINGS SMALL AND LARGE DIAMETER MOLDED FITTINGS MARCH 1, 2017 SUPERSEDES U IP (NOVEMBER 1, 2016) Our website pricing is the current list price and may vary from our printed price list. Please visit our website for up-to-date information

2 LIST U IP MARCH 1, 2017 TERMS AND CONDITIONS OF SALE DESC. TERMS Cash discount 2% 10 days, net 30. The cash discount is allowed on merchandise only. Prices are subject to change and each order will be priced on the basis of prices in effect at the time of order. All orders are subject to approval of our office in Denver, CO. Possession of this price list does not necessarily constitute an offer by the Company to sell to the holder on the basis of the terms described hereon. MINIMUM ORDER $ net. OVERDUE INVOICES Interest charged at a rate of 1.5% per month on all overdue invoices. FREIGHT $ net for prepaid freight. All shipments are F.O.B. seller s factory or authorized warehouse. Prepaid orders will be shipped via the most economical route of our choice. If the Customer selects a route with a higher rate, the difference will be charged to the Customer. WEBSITE Our website pricing is the current list price and may vary from our printed price list. Please visit for up-to-date information. Prices and product availability are subject to change without notice. While we try to ensure accuracy, we reserve the right to correct any errors in pricing or descriptions, and to cancel or refuse to accept any order based on an incorrect price or description. Such corrections may be made even after an order is accepted. SHIPPING RESPONSIBILITY The responsibility of IPEX USA LLC. ceases when the carrier signs for the shipment in good order. We cannot be responsible for loss or damage to goods in transit, or delays or carriers in delivering shipments or for damages resulting from such delays as those caused by fire, explosion, act of God, strike or other difference with workmen, shortage of material or labor, delays in transportation, government restrictions, war, riot, civil commotion or cause beyond our control. Where shortage or damage is apparent, details should be noted by the carrier on the freight bill at the time of delivery. In case of concealed damage, carrier should be called at once to inspect the damaged shipment. Do not return damaged goods. RETURNED GOODS A Returned Goods Authorization Form issued by IPEX USA LLC. must accompany goods which are returned. We reserve the right to refuse the return of any item that is not a regular stock item with IPEX USA LLC. On items that are acceptable for credit, a restocking charge of twentyfive percent (25%) will be assessed against the credit to cover our handling, and/or inspecting or repackaging. Freight on returned goods will be the responsibility of the customer unless the reason for the return is due to defective goods. All goods returned must be in a saleable condition. WARRANTY Seller s products are carefully inspected for manufacturing defects, however, it is not always possible to detect hidden defects. Said products are warranted only to the extent that Seller will replace without charge, products proven to have manufacturing defects within 6 months of the date of delivery thereof and provided Seller has been given an opportunity to inspect the product alleged to be defective and the installation or use thereof. NO WARRANTY IS INCLUDED AGAINST ANY EXPENSE FOR REMOVAL, REINSTALLATION OR OTHER CONSEQUENTIAL DAMAGES ARISING FROM ANY DEFECT. THE WARRANTIES SET OUT ABOVE ARE THE ONLY WARRANTIES MADE BY SELLER AND ARE EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IPEX USA LLC. reserves the right to change the aforementioned TERMS AND CONDITIONS OF SALE without notice. CAUTION The Seller does not recommend the use of thermoplastic piping systems for transport or storage of compressed air or other compressed gases or the testing of such systems with compressed air or other compressed cases, in exposed, above ground locations. Use of plastic piping products in exposed compressed gas systems voids our warranty for the products so used. For further information, contact your IPEX USA LLC. representative. OTHER In addition to sizes listed in this price list, other sizes may be available upon request. The product names used in this price list are for identification purposes only. All trademarks and registered trademarks are the property of their respective owners. DESC. TABLE OF CONTENTS Page COUPLINGS 3 BUSHINGS 3 REDUCER BUSHINGS 3 ADAPTERS 3 CLEANOUT ADAPTERS 3 CLEANOUT PLUGS 4 CAPS /2 ELBOWS 4 45 ELBOWS 4 60 ELBOWS 4 90 ELBOWS 5 WYES 5 DOUBLE FIXTURE FITTINGS 6 TEES 6 CLEANOUTS 10 P TRAPS 10 TRAP ADAPTERS 10 ONE PIECE CLOSET FLANGES 12 EASY OPEN CLOSET FLANGES 13 ADJUSTABLE CLOSET FLANGES 14 OFFSET CLOSET FLANGES CLOSET FLANGES 14 CLOSET FLANGE ACCESSORIES 14 URINAL FLANGES CLOSET ELBOWS 16 EXPANSION JOINTS 16 CAST IRON ADAPTERS 17 ADAPTER COUPLINGS 17 ADAPTER BUSHINGS 17 GRATES 17 TEST PLATES 17 INDEX

3 LIST U IP MARCH 1, 2017 COUPLINGS COUPLING - H x H C19A ½ C19A C19A C19A C19A C19A ADAPTERS MALE ADAPTER - MPT x H C19A ¼ x 1½ C19A ½ C19A C19A C19A C19A REPAIR COUPLING (No Pipe Stop) - H x H R C19A ½ R C19A R C19A R C19A REDUCER COUPLING - H x H C19A x 1½ C19A x 1½ C19A x C19A x C19A x C19A x C19A x C19A x BUSHINGS FLUSH BUSHING - Spg x H C19A x 1½ C19A x 1½ C19A x C19A x C19A x C19A x C19A x C19A x C19C x C19C x REDUCER BUSHINGS EXTENDED BUSHING - Spg x H C19A x C19A x C19A x C19C x C19C x C19C x C19C x C19C x C19C x FEMALE ADAPTER - H x FPT C19A ½ C19A C19A C19A C19A CLEANOUT ADAPTERS FITTING CLEANOUT ADAPTER, with Plug - Spg x FPT AS C19A ½ AS C19A AS C19A AS C19A AS C19A C19C C19C C19C FITTING CLEANOUT ADAPTER, with Plug - H x H x FPT C19C C19C C19C FITTING CLEANOUT ADAPTER - Spg x FPT S C19A ½ S C19A S C19A S C19A S C19A TWO-WAY CLEANOUT FITTING - H x H x H C19A C19A C19A

4 LIST U IP MARCH 1, 2017 CLEANOUT PLUGS CLEANOUT PLUG - MPT S C19A ½ S C19A S C19A S C19A S C19A COUNTERSUNK PLUG - MPT C19A C19A C19A C19A CAPS POLYETHYLENE CAP Slip-on Style - Orange 10TC C ½ See U10 10TC C See U10 10TC C See U10 10TC C See U10 10TC C See U10 PVC CAP - Hub C19A ½ C19A S C19A S C19A C19A C19C C19C PVC PLUG - Spg C19A C19A C19C C19C C19C /2 ELBOWS 1/16 BEND (22½ ) - H x H C19A ½ C19A C19A C19A C19A /16 BEND, Street (22½ ) - Spg x H C19A ½ C19A C19A C19A C19A ELBOWS 1/8 BEND (45 ), LONG TURN - H x H C19A ½ C19A C19A C19A C19A C19C C19C /8 BEND (45 ), SHORT TURN - H x H C19A /8 BEND, Street (45 ), LONG TURN - Spg x H C19A ½ C19A C19A C19A C19A C19C C19C /8 BEND, Street (45 ), SHORT TURN - Spg x H C19A C19A ELBOWS 1/6 BEND (60 ) - H x H C19A ½ C19A /6 BEND (60 ), LONG TURN - H x H L C19A L C19A

5 LIST U IP MARCH 1, ELBOWS 1/4 BEND (90 ) - H x H C19A ½ x L C19A ½ L C19A L C19A L C19A C19A C19A C19C C19C /4 BEND, Street (90 ) - Spg x H L C19A ½ L C19A L C19A L C19A C19A C19A C19C C19C /4 BEND (90 ), LONG SWEEP - H x H C19A ½ C19A C19A C19A /4 BEND, Street (90 ), LONG SWEEP - Spg x H C19A ½ C19A C19A WYES WYE - H x H x H L C19A ½ L C19A L C19A L C19A C19A C19A x 1½ x 1½ L C19A x 2 x 1½ L C19A x 3 x 1½ L C19A x 3 x L C19A x 4 x L C19A x 4 x C19A x 6 x C19A x 6 x C19A C19C C19C C19A x 8 x C19A x 8 x C19C x 12 x WYE, Street - Spg x H x H L C19A ½ WYE, Street - Spg x H x H L C19A x 3 x VENT ELL (90º) - H x H C19A ½ C19A C19A /4 BEND (90º), with Low Heel Inlet (90º) - H x H x H C19A x 3 x C19A x 4 x /4 BEND (90º), Street with Low Heel Inlet - H x H x Spg C19A x 3 x Visit our website for more information Specification Sheets E-Newsletter Price Lists

6 LIST U IP MARCH 1, 2017 LONG TURN TEE WYE, Single - H x H x H C19A ½ C19A C19A C19A C19A x 1½ x 1½ C19A x 2 x 1½ C19A x 3 x 1½ C19A x 3 x C19A x 4 x C19A x 4 x DOUBLE WYE - H x H x H x H C19A DOUBLE WYE - H x H x H x H C19A C19A C19A x 8 x C19A x 8 x C19A C19A C19A x 6 x C19A x 3 x 1½ x 1½ DOUBLE FIXTURE FITTINGS DOUBLE FIXTURE FITTING - H x H x H x H C19A C19A x 1½ x 1½ x 1½ C19A x 2 x 3 x C19A TEES SANITARY TEE - H x H x H SANITARY TEE, with Left Side Inlet - H x H x H x H L C19A ½ L C19A L C19A x 1½ x 1½ L C19A x 1½ x L C19A x 2 x 1½ C19A C19A x 3 x 1½ L C19A x 3 x L C19A C19A x 4 x C19A x 4 x C19A x 6 x C19A x 6 x C19A x 8 x SANITARY TEE, Street - Spg x H x H L C19A ½ L C19A C19A L C19A L C19A x 1½ x 1½ L C19A x 1½ x L C19A x 2 x 1½ L C19A x 3 x C19A x 6 x C19A L C19A x 3 x 3 x 1½ L C19A x 3 x 3 x DOUBLE 1/4 BEND - H x H x H C19A SANITARY TEE, with Right Side Inlet - H x H x H x H R C19A x 3 x 2 x R C19A x 3 x 3 x 1½ R C19A x 3 x 3 x

7 LIST U IP MARCH 1, 2017 DOUBLE SANITARY TEE - H x H x H x H C19A ½ C19A C19A x 2 x 1½ x 1½ C19A C19A x 3 x 1½ x 1½ C19A x 3 x 2 x C19A HORIZONTAL TWIN TEE C19A x 3 x 1½ x 1½ SANITARY TEE, with Right & Left Side Inlets - H x H x H x H x H LR C19A x3x3x3x2x REDUCING TEE - H x H x H C19A x 6 x C19A x 8 x C19A x 8 x C19C x 10 x C19C x 10 x C19C x 10 x C19C x 12 x C19C x 12 x C19C x 12 x C19C x 12 x (Black) Grey VENT TEE - H x H x H C19A ½ C19A C19A C19A C19A C19A C19C C19C IAPMO and CSA approval pending

8 LIST U IP MARCH 1, 2017 Appliance / Dishwasher Wye For roughing in or installing a dishwasher, water softener or any appliance with a 1/2 or 3/4 discharge hose. Features Injection molded in ABS (Black) and PVC (White). Top and bottom sockets are 1 1/2 DWV (Schedule 40) size. Branch arm is a 1/2 or 3/4 hose barb. Unit comes complete with molded on plug. Plug will hold test without solvent cementing. Saves time and money. CSA certified. NSF, IAPMO listed. DESC. Exclusively from APPLIANCE WYE/GREYWATER TRAP PRIMER - H x H x Hose Barb Snap-in Plug is Molded on Fitting for Use During Rough-In W C ½ x 1½ x ½ Installation W C ½ x 1½ x ¾ W C ½ x 1½ x 1 Single sink installation. For rough-in, insert plug into hose barb. When installing an appliance, simply remove plug and attach hose. Plug has oversized top to prevent installation of hose with plug still in place. Can be installed vertically or horizontally Double sink installation.

9 No more glued in test plates No more mechanical test plugs or test balls PVC DWV FITTINGS LIST U IP MARCH 1, x 3 Reducing Line Cleanout with Test Membrane New! Innovative test membrane from IPEX enables mess-free removal of the test membrane after a water test. Exclusively from By puncturing the PVC membrane with a utility knife, wastewater is drained slowly, avoiding the typical torrent of wastewater mess with other test methods. Simply remove the membrane with a knife after the system is tested. DESC. REDUCING LINE CLEANOUT WITH TEST MEMBRANE H x H with Plug & O-ring TEST WAT C x 3 x

10 LIST U IP MARCH 1, 2017 CLEANOUTS CLEANOUT TEE - H x H x FPT S C19A ½ S C19A S C19A S C19A P TRAP, with Union - H x H P Traps Continued N C19A ½ E C19A CLEANOUT TEE with Plug & O-ring - H x H AW C P TRAP LA PATTERN, with Union - Slip x H A C19A ½ B C19A ¼ x 1½ CLEANOUT TEE with Plug - H x H x FPT AS C19A ½ AS C19A AS C19A AS C19A A C19A C19A REDUCING LINE CLEANOUT with Plug & O-ring - H x H A C x C19A x C19A x P TRAP ELL - Spg x H C19A ½ 7.78 TRAP ADAPTERS SANITARY TEE TRAP ADAPTER - H x H x Slip Joint AW C ½ C19A x P TRAPS P TRAP, with Solvent Weld Joint - H x H S C19A ½ C19A C19A C19A C19A P TRAP, with Cleanout & Solvent Weld Joint - H x H AS C19A ½ A C19A TRAP ADAPTER - H x Slip Joint, Ideal for Pedestal Sinks AW C ½ x 1¼ AW C ½ x 1½ TRAP ADAPTER, with Washer & Nut - H x Slip A C19A ½ A C19A ½ x 1¼ 6.50 P TRAP U-Bend - H x H S C19A ½ C19A C19A C19A C19A TRAP ADAPTER, with One-piece Poly Nut - H x Slip A C19A ½ A C19A ¼ x 1½

11 LIST U IP MARCH 1, 2017 Kitchen and Bathroom P-Traps Material Available in ABS (Black) and PVC (White) with or without cleanout. Exclusively from 10 (Patent # 6,859,956) DESC. PERMOSEAL P TRAP with Union Connection & Cleanout - H x H A C19A ½ Connection Adjustable joint allows up to 10 of angle adjustment providing ease of installation in situations with pipe misalignment or offset fittings while maintaining a secure seal. PERMOSEAL P TRAP, with Union Connection - H x H E C19A ½

12 LIST U IP MARCH 1, 2017 TRAP ADAPTERS Continued FITTING TRAP ADAPTER, with Washer & Nut - Spg x Slip A C19A ½ Y C19A ½ x 1¼ 9.43 SLIP JOINT NUT C19A ¼ C19A ½ 1.81 FITTING TRAP ADAPTER, with One-piece Poly Nut - Spg x Slip A C19A ½ A C19A ¼ x 1½ 4.80 SLIP JOINT WASHER C ½ C See U10 See U10 FITTING TRAP ADAPTER, less Washer & Nut (Fitting Male Adapter) - Spg x MPT C19A ½ C19A ONE PIECE CLOSET FLANGES CLOSET FLANGE, One Piece Plastic - Hub End with Gussets C19A FITTING TRAP ADAPTER, less Washer & Nut (Fitting Female Adapter) - H x MPT C19A ½ 5.52 CLOSET FLANGE, One Piece Plastic - With molded test plate C19A x COPPER TO DWV PIPE ADAPTER - H x Slip A C19A ½ A C19A ½ x 1¼ 5.13 CLOSET FLANGE, One Piece Plastic - Hub C19A x CSA certified for use in P Trap area only SANITARY TEE SINK STRAINER ADAPTER H x H x Strainer Adapter (with Gasket) AW C ½ 90 SINK STRAINER ADAPTER H x Strainer Adapter (with Gasket) AW C ½ CLOSET FLANGE, One Piece Plastic - Hub Flush Fit C19A C19A x Without Pipe Stop X C19A x XW C x 3 Price list With Molded Test Plate T C19A x Fits over 3 or inside 4 Schedule 40 DWV pipe Fits over 3 DWV or inside 4 SDR 35 pipe TRAY PLUG ADAPTER - H x FPT C19A ½

13 LIST U IP MARCH 1, 2017 New! No more hammers No more damage! No Hammer- Easy Open Test Cap Closet Flanges New! Innovative test membrane from IPEX enables mess-free removal of the test membrane after a water test. Simply remove the membrane with a knife after the system is tested. Patent Pending Exclusively from DESC. IPEX EO, No Hammer/Easy Open TEST CAP CLOSET FLANGE One piece flush fit easy open closet flange with pipe stop WEO C x 3 Adjustable flush fit easy open closet flange without pipe stop XWSSEO C x

14 LIST U IP MARCH 1, 2017 ADJUSTABLE CLOSET FLANGES CLOSET FLANGE, Adjustable Hub End with Adjustable Metal Ring M C19A M C19A x Hub End, Flush Fit with Adjustable Plastic Ring C19A x Spigot End with Adjustable Metal Ring M C19A M C19A x Extended Spigot with Adjustable Stianless Steel Ring (with 3-1/2 ext. spigot) SS C19A Extended Spigot with Adjustable Metal Ring Ext. (with 3-1/2 ext. spigot) M C19A OFFSET CLOSET FLANGES OFFSET CLOSET FLANGE - Hub (Offset 1½ ) With adjustable metal ring M C19A x With stainless steel ring SS C19A x With adjustable metal ring WSS C x OFFSET CLOSET FLANGE - Hub (Offset 1½ ) With adjustable plastic ring C19A x With molded test plate T C19A x Warning IPEX recommends sponge rubber and wax gaskets only for use with all closet flanges. 45 CLOSET FLANGES 45 DISCHARGE CLOSET FLANGE - Hub With adjustable plastic ring W C x 3 With adjustable metal ring MW C x 3 With adjustable stainless steel ring WSS C x 3 CLOSET FLANGE ACCESSORIES CLOSET FLANGE SPACER RING W C x

15 LIST U IP MARCH 1, 2017 Used to provide a seal between 2 internally trapped urinals and drainage system. Urinal Flange Kits Flanges are made of corrosion resistant ABS and PVC plastic. They will not rot out like traditional urinal flanges providing longer life and fewer health concerns. 2 connections available in Hub and Spigot versions making IPEX urinal flange kits adaptable to a variety of systems. Complete with all the necessary mounting hardware eliminating missing or back-ordered parts. Adjustable 4-7 center which can be cut easily to accommodate the requirements of most applications. The flange is reinforced with a cross rib to prevent the fork from spreading. Thick foam gasket provides a positive seal, reducing the potential for leaks. Exclusively from DESC. URINAL FLANGE KIT Spigot W C W C URINAL FLANGE KIT Hub W C with 4 Center with Adjustable Center:

16 LIST U IP MARCH 1, CLOSET ELBOWS CLOSET BEND, Reducing - Spg x H C19A x CLOSET BEND, Reducing - H x H C19A x CLOSET BEND, Reducing with Test Cap - Spg x H A C19A x EXPANSION JOINTS EXPANSION JOINTS Allows for the expansion and contraction of pipe due to temperature change and the shrinkage of building materials that the pipe is connected to. Injected molded in ABS (Black) and PVC (White). Nitrile Buna-N O-ring. PQAA Grease #2 lubricant. Features Allows for up to 3 (7.6 cm) of travel (Type I) or 8 (20.3 cm) of travel (Type II). Flow direction and proper degree of extention indicated on expansion joint. Used in vertical applications. Benefits Allows movement without leakage. Removes the stress from both pipe and fittings which could cause failure of the piping system. Applications For Drain, Waste & Vent applications (non-pressure). For Log Homes. For straight pipe runs of 30 ft. (9.1 m) or longer. Approvals CSA Certified, IAPMO Listed EXPANSION JOINT - H x H TYPE I - 3 Travel AWBC C ½ AWBC C AWBC C TYPE II - 8 Travel AWBC C Installation Instructions 1. Locate unit (plunger side up). Perferably beneath lowest fixture. 2. Push plunger (inner section) until unit is fully closed. 3. Pull plunger back out specified distance according to temperature at time of installation. Fahrenheit Degrees Celsius Degrees Distance Based on 20 feet (6 meters) installation. 2.5 or 65mm 2.25 or 55mm 2 or 50 mm 1.75 or 45mm Exclusively from

17 LIST U IP MARCH 1, 2017 CAST IRON ADAPTERS PVC ADAPTER, Cast Iron, (adapts PVC pipe to Cast Iron treaded connections) H x NPT W C x 3½ HUB ADAPTER, Cast Iron (Adapts DWV Spigot to Cast Iron Hub) C19A C19A C19A x 4 CI C19A NO HUB ADAPTER, Cast Iron (Adapts No Hub Elastomer Coupling to DWV Spigot) - H x Spg C19A ½ C19A C19A C19A C19A ADAPTER COUPLINGS ADAPTER COUPLING (Adapts Sewer & Drain to DWV) - H x H C19A x C19A x GRATES DRAIN GRATE - Spg C19A W C C19A W C TEST PLATES TEST PLATE - Spg ABS C ½ C C C PVC Visit our website for more information Specification Sheets E-Newsletter Price Lists C19A ADAPTER BUSHINGS ADAPTER COUPLING (Adapts Sewer & Drain to DWV) - H x H C19A C19A APPROVALS: Unless otherwise noted, products are approved / listed by NSF and IAPMO to standards that include: NSF Standard 14 IAPMO IS5, PS 146 ASTM D2665, D1784, D

18 LIST U IP MARCH 1, 2017 INDEX PART# Weight CARTON PG. # PART# Weight CARTON PART PG. # # PART# Weight CARTON PG. # (Lbs.) BAR (Lbs.) BAR (Lbs.) BAR TC TC TC TC TC AS S AS S AS S AS S A L L L L R L R L R L L L LR L L L L L L L L L L L L L L L L L L L A A A A A A A A A R R R R S S S S S S S A S AS S A N Y E A B A E M M M M M SS T X M SS T AS S AS S AS S AS S AS S

19 LIST U IP MARCH 1, 2017 PART# PART Weight # CARTON PG. # (Lbs.) BAR L L L L L L L L L WAT AW AW AW AW AW AW W W W XWSSEO MW W WSS XW WSS W W W AWBC AWBC AWBC AWBC W W W PART# Weight (Lbs.) CARTON BAR PG. # PART# Weight CARTON PG. # (Lbs.) BAR

20 Eastern U.S. Customers Tel: (289) Toll Free: Fax: (905) Western U.S. Customers Tel: (303) Toll Free: Fax: (303) PRINTED IN CANADA