PIPE FITTING ACCESSORIES EFFECTIVE JANUARY 14, 2019

Transcription

1 IMPORT PRICE LIST PIPE FITTING EFFECTIVE JANUARY 14, 2019 version: IMP-ACC-UPL EFFECTIVE: JANUARY 14, 2019 (SUPERSEDES ALL PREVIOUS PRICING) CORONA CALL CENTER (U.S.) Toll Free: (877) Fax: (951) HOUSTON CALL CENTER (U.S.) Toll Free: (800) Fax: (281) CAMBRIDGE CALL CENTER (CANADA) Toll Free: (888) Fax: (519) Star Pipe Products 4018 Westhollow Parkway Houston, Texas Corporate Headquarters Toll Free Telephone Fax

2 General Terms and Conditions GENERAL DELIVERY WARRANTY LIABILITY DISCLAIMER RETURNS SHIPMENTS PRODUCTS PRICES These terms and conditions shall control with respect to any purchase order or sale of Seller s products. No waiver, alteration or modification of these terms and conditions whether on Buyer s purchase order or otherwise shall be valid unless the waiver, alteration or modification is specifically accepted in writing and signed by an authorized representative of Seller. Seller will make every effort to complete delivery of products as indicated on Seller s acceptance of an order, but Seller assumes no responsibility or liability, and will accept no back charge, for loss or damage due to delay or inability to deliver caused by acts of God, war, labor difficulties, accident, delays of carriers, by contractors or suppliers, inability to obtain materials, shortages of fuel and energy, or any other causes of any kind whatsoever beyond the control of Seller. Seller may terminate any contract of sale of its products without liability of any nature, by written notice to Buyer, in the event that the delay in delivery or performance resulting from any of the aforesaid causes shall continue for a period of sixty (60) days. Under no circumstances shall Seller be liable for any special or consequential damages or for loss, damage, or expense (whether or not based on negligence) directly or indirectly arising from delays or failure to give notice of delay. Seller warrants for one year from the date of shipment Seller s manufactured products to the extent that Seller will replace those having defects in material or workmanship when used for the purpose and in the manner which Seller recommends. If Seller s examination shall disclose to its satisfaction that the product is defective, and an adjustment is required, the amount of such adjustment shall not exceed the net sales price of the defective products only and no allowance will be made for labor or expense of repairing or replacing defective product or workmanship or damage resulting from the same. No adjustment shall be implemented unless product in question is returned to seller in its originally installed condition, still connected to other components of the joint. Buyer must contact Seller as quickly as possible so Seller can assess product in its installed condition. No claims will be honored unless claim is made within forty-five (45) days of the defect being found. Where engineering design or fabrication work is supplied, Buyer s acceptance of Seller s design or of delivery of work shall relieve Seller of all further obligation, other than expressed in Seller s product warranty. THIS IS SELLER S SOLE WARRANTY. SELLER MAKES NO OTHER WARRANTY OF ANY KIND, EXPRESSED OR IMPLIED AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE WHICH EXCEED SELLER S AFORESTATED OBLIGATION ARE HEREBY DISCLAIMED BY SELLER AND EXCLUDED FROM THIS WARRANTY. Seller neither assumes, nor authorizes any person to assume for it, any other obligation in connection with the sale of its engineering designs or product. This warranty shall not apply to any products or parts of products which (a) have been repaired or altered outside of Seller s factory, in any manner; (b) have been subjected to misuse, negligence or accidents; (c) have been used in a manner contrary to Seller s instructions or recommendations. Seller shall not be responsible for design errors due to inaccurate or incomplete information supplied by Buyer or its representatives. This warranty is non-transferable. Seller will not be liable for any loss, damage, cost of repairs, incidental or consequential damages of any kind, whether based upon warranty (except for the obligation accepted by Seller under Warranty above), contract or negligence, arising in connection with the design, manufacture, sale, use or repair of the products or of the engineering designs supplied to Buyer. Per AWWA/ANSI C110 A21.10, the flanged joint is generally specified for above ground service. Underground use of the flanged joint is generally not desirable due to the rigidity of the joint. Seller cannot accept return of any products unless its written permission has been first obtained, in which case same will be credited subject to the following: (a) All material returned must, on its arrival at Seller s plant, be found to be in first-class condition; if not, cost of putting in saleable condition will be deducted from credit memoranda; (b) A handling charge deduction of twenty-five percent (25%) will be made from all credit memoranda issued for material returned; (c) Transportation charges, if not prepaid will be deducted from credit memoranda. All products sent out will be carefully examined, counted and packed. The cost of any special packing or special handling caused by Buyer s requirements or requests shall be added to the amount of the order. No claim for shortages will be allowed unless made in writing within ten (10) days of receipt of a shipment. Claims for products damaged or lost in transit should be made on the carrier, as Seller s responsibility ceases, and title passes, on delivery to the carrier. Orders covering special or non-standard products are not subject to cancellation except on such terms as Seller may specify on application. Prices and designs are subject to change without notice. All prices are F.O.B. Point of Shipment, unless otherwise stated. FORCE MAJEURE Seller shall not be responsible or liable in any way for any failure to perform due to acts of God, fire, flood, serious accidents, foreign or United States embargo, war or riot, serious shortages, unavailability or significant price increases in commodities, materials or components, labor disputes, interruption of transportation, loss of essential production services, laws, rules, regulations, instructions or acts of any U.S. or foreign governmental authority, or by any other event beyond the reasonable control of Seller or its subcontractors. TAXES The amount of any sales, excise or other taxes, if any, applicable to the products covered by this order, shall be added to the purchase price and shall be paid by Buyer unless Buyer provides Seller with an exemption certificate acceptable to the taxing authorities. Page 2

3 TABLE OF CONTENTS UTILITY PIPE FITTINGS General Terms & Conditions pg. 2 MJ Glands pg. 5-6 Pre-Packaged MJ Accessories pg MJ /Push-On Gaskets pg MJ Bolts & Nuts pg (T-head, Pigtail, Anti-Rotational, HLSA, Blue, Stainless Steel) Page 3

4 NOTES: REGISTERED TRADEMARK OF STAR PIPE PRODUCTS STAR PIPE PRODUCTS Page 4

5 DUCTILE IRON MJ GLAND - COMPACT 2 MJG $ MJG $ MJG $ MJG $ MJG $ MJG $ MJG $ MJG $ MJG $ MJG $ MJG $ MJG $ MJG $ MJG $ MJG $ MJG $1, DUCTILE IRON MJ GLAND (OVERSIZED) - COMPACT 4 MJGO $ MJGO $ MJGO $ MJGO $ MJGO $ MJGO $ DUCTILE IRON MJ SWIVEL GLAND - COMPACT 4 MJGS $ MJGS $ MJGS $ MJGS $ DUCTILE IRON MJ GLAND - FULL BODY 2 MJG02** $ MJDG $ MJDG $ MJDG $ MJDG $ MJDG $ MJDG $ MJDG $ MJDG $ MJDG $ MJDG $ MJDG $ MJDG $ MJDG $1, MJDG $1, MJDG $1, **C153 Page 5

6 HEAVY DUTY RETAINER GLANDS 3 MJRGHD $ MJRGHD $ MJRGHD $ MJRGHD $ MJRGHD $ MJRGHD $ MJRGHD $ MJRGHD $ MJRGHD $ MJRGHD $ MJRGHD $ MJRGHD $1, MJRGHD $1, GLAND PACK - COMPACT MJ GLAND, MJ GASKET & T-HEAD BOLTS & NUTS 2 MJGP $ MJGP $ MJGP $ MJGP $ MJGP $ MJGP $ MJGP $ MJGP $ MJGP $ MJGP $ MJGP $ MJGP $ MJGP $ MJGP $ MJGP $1, MJGP $1, LONGER BOLT - GLAND PACK - COMPACT MJ GLAND, MJ GASKET & LONGER T-HEAD BOLTS & NUTS 3 MJGP03W/ $ MJGP04W/4B $ MJGP06W/4B $ MJGP08W/4B $ MJGP10W/4.5B $ MJGP12W/4.5B $ MJGP14W/5B $ MJGP16W/5B $ MJGP18W/ $ MJGP20W/ $ Page 6

7 TRANSITION GLAND PACK - COMPACT MJ GLAND, MJ TRANSITION GASKET & T-HEAD BOLTS & NUTS 2 MJGPT $ MJGPT $ MJGPT $ MJGPT $ MJGPT $ MJGPT $ MJGPT $79.00 GLAND PACK WITH STAR BLUE BOLTS - COMPACT MJ GLAND, MJ GASKET WITH FLUOROPOLYMER COATED T-HEAD BOLTS & NUTS 3 MJGPCB $ MJGPCB $ MJGPCB $ MJGPCB $ MJGPCB $ MJGPCB $ MJGPCB $ MJGPCB $ MJGPCB $ MJGPCB $ MJGPCB $ VALVE PACK - COMPACT MJ GLAND, MJ GASKET WITH ANTI-ROTATIONAL BOLTS & NUTS 2 MJGPV $ MJGPV $ MJGPV $ MJGPV $ MJGPV $ MJGPV $ MJGPV $ MJGPV $ MJGPV $ MJGPV $ MJGPV $ MJGPV $ TRANSITION VALVE PACK - COMPACT MJ GLAND, MJ TRANSITION GASKET WITH ANTI-ROTATIONAL BOLTS & NUTS 3 MJGPVT $ MJGPVT $ MJGPVT $ MJGPVT $ MJGPVT $ MJGPVT $89.00 Page 7

8 GLAND PACK - FULL BODY MJ FULL BODY GLAND, MJ GASKET & T-HEAD BOLTS & NUTS 2 MJGP02** $ MJDGP $ MJDGP $ MJDGP $ MJDGP $ MJDGP $ MJDGP $ MJDGP $ MJDGP $ MJDGP $ MJDGP $ MJDGP $ MJDGP $1, MJDGP $1, MJDGP $2, MJDGP $2, **C153 HEAVY DUTY RETAINER GLAND PACKS BOLT PACK 3 MJRGHDP $ MJRGHDP $ MJRGHDP $ MJRGHDP $ MJRGHDP $ MJRGHDP $ MJRGHDP $ MJRGHDP $ MJRGHDP $ MJRGHDP $ MJRGHDP $ MJRGHDP $1, MJRGHDP $2, MJ GASKET WITH T-BOLTS & NUTS 2 MJBGAS $ MJBGAS $ MJBGAS $ MJBGAS $ MJBGAS $ MJBGAS $ MJBGAS $ MJBGAS $ MJBGAS $ MJBGAS $ MJBGAS $ MJBGAS $ MJBGAS $ MJBGAS $ Page 8

9 42 MJBGAS42* $ MJBGAS48* $ * Can not be used on StarGrips LONGER BOLT PACK MJ GASKET WITH LONGER T-BOLTS & NUTS 3 MJBGAS03W/ $ MJBGAS04W/ $ MJBGAS06W/ $ MJBGAS08W/ $ MJBGAS10W/ $ MJBGAS12W/ $ MJBGAS14W/ $ MJBGAS16W/ $ MJBGAS18W/ $ MJBGAS20W/ $ TRANSITION BOLT PACK MJ TRANSITION GASKET WITH T-BOLTS & NUTS 2 MJBGAST $ MJBGAST $ MJBGAST $ MJBGAST $ MJBGAST $ MJBGAST $ MJBGAST $54.00 STAR BLUE BOLT PACK - MJ GASKET WITH FLUOROPOLYMER COATED T-BOLTS & NUTS 3 MJBCGAS $ MJBCGAS $ MJBCGAS $ MJBCGAS $ MJBCGAS $ MJBCGAS $ MJBCGAS $ MJBCGAS $ MJBCGAS $ MJBCGAS $ VALVE BOLT PACK MJ GASKET WITH ANTI-ROTATIONAL BOLTS & NUTS 2 MJBGASV $ MJBGASV $ MJBGASV $ MJBGASV $ MJBGASV $ MJBGASV $ MJBGASV $55.00 Page 9

10 LONGER VALVE BOLT PACK (IN PLASTIC BAGS) MJ GASKET WITH LONGER ANTI-ROTATIONAL BOLTS & NUTS 3 MJBGASV03W/3.5P $ MJBGASV04W/4P $ MJBGASV06W/4P $ MJBGASV08W/4P $ MJBGASV10W/4.5P $ MJBGASV12W/4.5P $58.00 MJ GASKET - SBR 2 MJGAS $ MJGAS $ MJGAS $ MJGAS $ MJGAS $ MJGAS $ MJGAS $ MJGAS $ MJGAS $ MJGAS $ MJGAS $ MJGAS $ MJGAS $ MJGAS $ MJGAS $ MJGAS $ MJ TRANSITION GASKET 2 MJGAST $ MJGAST $ MJGAST $ MJGAST $ MJGAST $ MJGAST $ MJGAST $19.00 PUSH ON GASKET 4 POGAS $ POGAS $ POGAS $ POGAS $ POGAS $ POGAS $ POGAS $ POGAS $ POGAS $ POGAS $54.00 Page 10

11 PUSH ON TRANSITION GASKET 4 POGAST $ POGAST $ POGAST $ POGAST $ POGAST $ MJ T-HEAD BOLT WITH HEXAGON NUT (LOOSE) 5/8 x 3 BOLTCS $2.90 3/4 x 3 1/2 BOLTCS $3.30 3/4 x 4 BOLTCS $3.30 3/4 X 4 1/2 BOLTCS $3.70 3/4 x 5 BOLTCS $ x 6 BOLTCS $ /4 x 6 BOLTCS $ /4 x 6 BOLTCS3/4X $ /4 x 6 1/2 BOLTCS $ /4 x 7 BOLTCS $8.70 3/4 x 9 BOLTCS $11.50 MJ 304 STAINLESS STEEL T-HEAD BOLT WITH HEXAGON NUT (LOOSE) 5/8 x 3 BOLTSS POA 3/4 x 3.5 BOLTSS POA 3/4 x 4 BOLTSS POA 3/4 x 4.5 BOLTSS POA 3/4 x 5 BOLTSS POA 1 x 6 BOLTSS POA 1 1/4 x 6.5 BOLTSS POA 1 1/4 x 8.5 BOLTSS POA MJ 316 STAINLESS STEEL T-HEAD BOLT WITH HEXAGON NUT (LOOSE) 5/8 x 3 BOLTSS POA 3/4 x 3.5 BOLTSS POA 3/4 x 4 BOLTSS POA 3/4 x 4.5 BOLTSS POA 3/4 x 5 BOLTSS POA 1 x 6 BOLTSS POA 1 1/4 x 6.5 BOLTSS POA 1 1/4 x 8.5 BOLTSS POA MJ STAR BLUE T-HEAD BOLT WITH HEXAGON NUT (LOOSE) (FLUOROPOLYMER COATED) 5/8 x 3 BOLTCB $6.50 3/4 x 3 1/2 BOLTCB $7.20 3/4 x 4 BOLTCB $8.00 3/4 x 4 1/2 BOLTCB $8.70 3/4 x 5 BOLTCB $ x 6 BOLTCB $20.10 Page 11

12 MJ ANTI-ROTATIONAL T-HEAD BOLT WITH HEXAGON NUT (LOOSE) 5/8 x 3 BOLTAR $8.70 3/4 x 3 1/2 BOLTAR $5.50 3/4 x 4 BOLTAR $5.80 3/4 x 4 1/2 BOLTAR $6.50 3/4 x 5 BOLTAR $10.40 MJ STAR BLUE ANTI-ROTATIONAL T-HEAD BOLT WITH HEXAGON NUT (LOOSE) (FLUOROPOLYMER COATED) 5/8 x 3 BOLTARB $ /4 x 3.5 BOLTARB $ /4 x 4 BOLTARB $ /4 x 4.5 BOLTARB $ /4 x 5 BOLTARB $22.00 MJ EYEBOLT (PIGTAIL) WITH HEXAGON NUT (LOOSE) 3/4 x 3.5 BOLTPE $5.90 3/4 x 4 BOLTPE $6.00 3/4 x 4.5 BOLTPE $6.25 ORDERING INFORMATION PIPE QTY C153 T-BOLT C110 T-BOLT STARGRIP SIZE REQ. SIZE SIZE T-BOLT SIZE 2 2 5/8 x 3 5/8 x 3 N/A 3 4 5/8 x 3 5/8 x 3 5/8 x /4 x 3 1/2 3/4 x 3 1/2 3/4 x 3 1/ /4 x 3 1/2 3/4 x 3 1/2 3/4 x 3 1/ /4 x 3 1/2 3/4 x 4 3/4 x /4 x 3 1/2 3/4 x 4 3/4 x /4 x 3 1/2 3/4 x 4 3/4 x /4 x 4 3/4 x 4 1/2 3/4 x 4 1/ /4 x 4 3/4 x 4 1/2 3/4 x 4 1/ /4 x 4 3/4 x 4 1/2 3/4 x 4 1/ /4 x 4 3/4 x 4 1/2 3/4 x 4 1/ /4 x 4 1/2 3/4 x 5 3/4 x x 5 1/2 1 x 6 1 x x 5 1/2 1 x 6 1 x /4 x 6 1 1/4 x 6 1/2 1 1/4 x 8 1/ /4 x 6 1 1/4 x 6 1/2 1 1/4 x 8 1/2 FLANGE ACC PACKS - PLEASE CONTACT YOUR CUSTOMER SERVICE REPRESENTATIVE FOR PRICING Page 12